1 question hurry as fast as possible no link

Answer:

teeth chewing food

Explanation:

When teeth chews food it change its state from hard solid to fine substance that can be easily digested by the body i guess

Explanation:

no sé de qué me estás hablando

This is a precipitation reaction and 1.38 g of the precipitate will be formed is the statement is correct. Hence, option C is correct.

A precipitation reaction is when two or more dissolved chemicals combine to form one solid products. The exchange of ions between ionic compounds in aqueous solutions is a common component of these reactions, which are also occasionally referred to as double displacement, double replacement, or metathesis reactions.

in response to precipitation a process that converts soluble salts into solids that are insoluble in water. a neutralizing response an interaction between an acid and a base that results in the production of salt, water, and an ionic molecule.

Precipitate refers to a solid that forms from a solution. The blending of two transparent solutions is a common example: NaCl in combination with silver nitrate The answer is. The soli cannot be dissolved in water.

Thus, option C is correct.

For more information about precipitation reaction, click here:

https://brainly.com/question/24158764

#SPJ2

Answer:

You are correct it is NaCl

Answer:

the answer is D

This problem is asking for the consumption of silver ions when silver nitrate is reacted with copper. In such a case, since no masses are given, we can use the following from similar problems:

Mass of empty beaker: 110.000 g

Mass of beaker with silver nitrate (after all additions) and copper: 331.634 g.

Mass of beaker with silver: 113.395 g.

This means we can write the following chemical equation:

[tex]Cu+2AgNO_3\rightarrow Cu(NO_3)_2+2Ag[/tex]

And thus calculate the mass of silver nitrate that will produce the following mass of silver:

[tex]m_{Ag}^{produced}=113.395g-110.000g=3.395g[/tex]

Next, we use the 2:2 mole ratio of silver to silver nitrate (silver ions source):

[tex]3.395gAg*\frac{1molAg}{107.87gAg}*\frac{2molAgNO_3}{2molAg} *\frac{169.87gAgNO_3}{1molAgNO_3} = 5.35gAgNO_3[/tex]

The step will be defined for the given mass of available silver nitrate which will be compared to 5.35 g (consumed mass) to see if they are the same (all consumed) or different (partial consumption).

Learn more:

Answer:

Explanation:

I know it's right, because this answer is from my self and I hope it's help to us. keep learning and God bless.

c

Explanation:

compounds are combine from two or more elements

Answer:

I could be wrong but i believe the answer is D. It was not B when i took the test

Explanation:

There are many factors that we can take into account when attempting to relate microscopic bonding properties to solid-state properties, for example, the rigid and immobile nature of solid states and their molecular bonds.

Solid-state properties are simply put, the properties we can observe and measure when studying an element in solid form. These solids have specific characteristics such as:

and so on, which although not initially obvious, are caused by the microscopic molecular bonds of their atoms.

The microscopic properties of solids are very similar to that of the solid-state properties. The atoms of a solid are very close together and strongly bonded to one another, because of this the atoms form a very rigid structure that resists changes to their shape or volume, much like the macroscopic properties of the solid. This serves to show how these properties may cause the solid-state effects we can observe normally.  

To learn more visit:

https://brainly.com/question/4833954?referrer=searchResults

Water has the strongest intermolecular forces followed by ethanol and diethyl ether has the least intermolecular forces.

From the table, we can see the vapor pressures of water, ethanol and diethyl ether. The boiling point of water is 100°C, the boiling point of ethanol is 80°C while the boiling point of diethyl ether is 40°C.

We can see that the vapor pressures and approximate normal boiling points of the substances varies with the nature of intermolecular bond forces in the molecule.

Water has highest boiling point and the lowest vapor pressure followed by ethanol. Diethyl ether has the highest vapor pressure and lowest boiling point from the data in the table.

Learn more: https://brainly.com/question/8646601

Answer:

When the base neutralizes the acid, the number of moles of H+ = the number of moles of OH-. Therefore, the number of moles of H+ = 0.0125 moles. Every mole of HCl will produce one mole of H+; therefore, the number of moles of HCl = number of moles of H+. The concentration of the HCl is 0.25 M

Answer:

-106°C

Explanation:

1558 mmHg / 1 × 1 atm / 760. mmHg = 2.05 atm

PV = nRT

2.05 atm (10.0 L) = 1.50 mol (0.082 atmL/molK) T

20.5 atmL = (0.123 atmL/K) T

K/0.123 atm L × 20.5 atmL = (0.123 atmL/K) T × K/0.123 atmL

166.666 K = T

167 K = T (sig figs)

K = °C + 273

167 - 273 = °C - 273

-106 = °C

Answer:

B

Explanation:

The answer is B. All hydrocarbons are nonpolar, they are insoluble in water and they are highly flammable. Now, not all hydrocarbons have high boiling and melting point. For example, methane (CH4) has a boiling point of something clode to -161°C, and that is low. The boiling point increases when the number of carbon atoms in a compound increases, and based on methane and this theory, not all hydrocarbond have a high boiling point. This makes option B be the correct answer.

The molarity of the Ca(NO3)2 solution would be 0.005 M

First, let us look at the balanced equation of the reaction:

[tex]2HNO_3+Ca(OH)_2 ---> Ca(NO_3)_2+2H_2O[/tex]

The mole ratio of HNO3 to Ca(OH)2 is 2:1.

Mole of HNO3 = molarity x volume

                            = 0.2 x 150/1000

                              = 0.03 mole

Mole of Ca(OH)2 = 0.01 x 150/1000

                             = 0.0015

Thus, there is no limiting or excess reactant.

Also from the equation, mole ratio of Ca(OH)2 to Ca(NO3)2 is 1:1. Hence, the mole of Ca(NO3)2 would also be 0.0015 mole.

The total volume of the resulting solution would be: 150 +150 = 300 mL

Thus, the molarity of the resulting Ca(NO3)2 would be:

Molarity = mole/volume

              = 0.0015/0.3

               = 0.005 M

More on molarity can be found here: https://brainly.com/question/12127540

Answer:

Collision theory states that molecules must collide to react. For most reactions, however, only a small fraction of collisions produce a reaction.

Answer:

it down their!!!!!!!!!!1

Explanation:

The new volume  

=

23.2

L

Explanation:

Our Direct Nanofiltration (dNF) membranes offer the unique combination of a low fouling hollow fiber configuration with the ability to remove organics and salinity (hardness) from water in one simple step. Other than a strainer, no further pre-treatment is required. We manufacture our membranes with a patented layer-by-layer process, where multiple nano-scale layers are deposited on a membrane support. This method enables very precise and controlled rejection and flux properties of the membrane. A unique solution for troubled water.

Answer:

Sodium bicarbonate is an antacid used to relieve heartburn and acid indigestion. Your doctor also may prescribe sodium bicarbonate to make your blood or urine less acidic in certain conditions. This medication is sometimes prescribed for other uses; ask your doctor or pharmacist for more information.

Answer: -13% to 3 sig figs

Explanation:

A piece of potato had an original mass of 3.2g and after being left in a sugar solution for 24 hours it then had a mass of 2.8g. Calculate the percentage mass decrease of the potato.

the change in mass is 2.8 -3.2 = -0.4 gm

the % change fro  the origial piece is ( -0.4/3.2) X 100 = -12.5%

or  -13% to 3 sig figs

Answer:

Our current model of the atom can be broken down into three constituents parts – protons, neutron, and electrons. Each of these parts has an associated charge, with protons carrying a positive charge, electrons having a negative charge, and neutrons possessing no net charge.

As far as the intelligence of canines, it is widely accepted as a fact that the Border Collie is the most intelligent breed of dog.

The conclusion that border collies are the most intelligent breed of dog is credited to a canine psychologist by the name of Stanley Coren. He studied over 138 recognized breeds of dogs to measure the ease with which they learned new commands and the obedience rate of each breed.

Coren studies the learning and obedience of Border Collies over the course of 199 trials and found that this breed of dog performed 95% better than most other breeds, with only 9 of the 138 breeds studied coming close to the results of the border collie. Easily earning the title of the most intelligent breed of dogs.

To learn more visit:

https://brainly.com/question/9404831?referrer=searchResults

The six parts of DNA serially are A) adenine B) thymine C) Sugars D) Phosphate E) Guanine F) Cytosine.

DNA  is a hereditary material  which is present in human beings as well as all other living organisms.  Every cell which is present in an organism's body has DNA  which is the same. Most of the DNA is situated in the cell's nucleus and small amount of it can be found in the cell's mitochondria as well.

Information which is stored in DNA is stored as codes made up of four chemical bases namely, adenine, thymine , cytosine and guanine.Human DNA consists of 3 billion bases .The order of the bases determines information which is required for building and maintaining an organism.

DNA bases are capable of pairing up with each other. Adenine pairs with thymine and guanine pairs up with cytosine .Each base is also attached to a sugar molecule  and a phosphate group. A base, phosphate sugar are together called as nucleotides.

Learn more about DNA,here:

https://brainly.com/question/28481425

#SPJ2

Explanation:

I think third(white) isn't a redox reaction

Answer:

C6H5S^-

Explanation:

This is because you are removing the hydrogen to make it a conjugate base.

The formula for conjugate base of C6H5SH is C6H5S⁻.

Conjugate base is defined as the substance which is formed when an acid liberate its protons.

The acid donate protons and the acid changes into base.

Conjugate acid is defined as the pair of compound that differs by its protons by gaining protons.

Conjugate acid and base are based in acid base theory.

Thus, the formula for conjugate base of C6H5SH is C6H5S⁻.

To learn more about conjugate base, refer to the link below:

https://brainly.com/question/12883745

#SPJ2

Answer:

Hydrogen

Electronic notation

Explanation:

Answer:

= 0.198 mole H₂S in excess

Explanation:

A quick way to determine limiting reactant is to convert reactant values given to moles and divide by respective coefficient. The smaller value is the limiting reactant other reactants will be in excess. However, when working problem, use mole values given to solve, not results of division.

       FeS         +        2HCl          => FeCl₂ + H₂S

0.236mole/1      0.670mole/2

   = 0.236             = 0.335

limiting reactant is FeS; HCl will be in excess.

Problem solution

0.236mole FeS used + 2(0.236 mole HCl used)

=> 0.236 mole FeCl₂ + 0.236 mole H₂S + (0.670 - 0.472) mole HCl in excess or, 0.198 mole H₂S in excess.

Hope this helps.    :-)

Tingnan ang pinakamahuhusay na kagawian at patnubay sa pampublikong kalusugan para mapanatiling ligtas ang iyong mga customer at tauhan.

HOPE IT HELPS:)

PLS FOLLOW:)

#BRAINLIEST

Glucose is a molecular substance therefore, there are no ionic species in glucose.

Ionic substances dissolve in water to yield ions. Molecular substances do not produce ions in solution. The conductivity of ionic solutions owes to the presence of ions in solutions. Molecular solutions do not conduct electricity due to the absence of ions.

Glucose is a molecular substance hence they are are no ions present hence glucose does not conduct electricity.

Learn more:  https://brainly.com/question/13440572?