1.This type pressure is required for the formation of foliations:
2.This genetic category of rocks is most susceptible to metamorphism:
3 .This red colored mineral is an index of intermediate grade metamorphism:
4.Which foliated metamorphic rock represents the highest grade of metamorphism: ;which foliated metamorphic rock represents the lowest grade of metamorphism:.

Answers

Answer 1

Directed pressure is required for the formation of foliations. Foliations are planar structures in metamorphic rocks that are formed by the alignment of minerals under directed pressure.

How to explain the information

Shale is the genetic category of rocks that is most susceptible to metamorphism. Shale is a fine-grained sedimentary rock that is composed of clay minerals.

Garnet is a red colored mineral that is an index of intermediate grade metamorphism. Garnet is a relatively high-temperature mineral that forms when shale is metamorphosed at temperatures of 400-600 degrees Celsius.

Gneiss is the foliated metamorphic rock that represents the highest grade of metamorphism. Gneiss is characterized by coarse-grained minerals that are arranged in alternating bands of light and dark colors. These bands are formed by the segregation of minerals during metamorphism.

Learn more about rock on

https://brainly.com/question/26046551

#SPJ4


Related Questions

Below is a list of planetary properties. If you were to compare the numerical value of each property for Mars and Earth, which planet would have the larger value for each property?
Group of answer choices
Radius
[ Choose ] Earth Mars
Mass
[ Choose ] Earth Mars
Density
[ Choose ] Earth Mars
Distance from the Sun
[ Choose ] Earth Mars
Orbital Period
[ Choose ] Earth Mars
Rotation Period
[ Choose ] Earth Mars
Surface Temperature
[ Choose ] Earth Mars
Atmosphere Density
[ Choose ] Earth Mars

Answers

If we were to compare the numerical value of each property for Mars and Earth, which planet would have the larger value for each property will be as follows.

Radius: Earth has a larger radius than Mars.

Mass: Earth has a larger mass than Mars.

Density: Earth has a higher density than Mars.

Distance from the Sun: Mars is farther from the Sun than Earth.

Orbital Period: Mars has a longer orbital period than Earth.

Rotation Period: Mars has a longer rotation period than Earth.

Surface Temperature: Mars has a lower surface temperature than Earth.

Atmosphere Density: Earth has a higher atmosphere density than Mars.

Learn more about the Earth:

brainly.com/question/31064851

#SPJ4

North Atlantic cod larvae are part of a simple food chain: Phytoplankton à ZooplanktonàCod Larvae (arrows denote movement of energy; i.e. zoop eat phyto). Phytoplankton and Zooplankton have a relatively high Q10 for development time, while cod has a low value. Describe what may happen to this food web with increased warming from climate change.

Answers

With increased warming from climate change, several potential effects may occur in the described food web of North Atlantic cod larvae, Phytoplankton, and Zooplankton.

The changes in the food web

Changes in Phytoplankton Population: Higher water temperatures can lead to changes in the composition and abundance of Phytoplankton.  This could lead to shifts in the availability and quality of food for Zooplankton.

Impact on Zooplankton: As the primary consumers of Phytoplankton, Zooplankton populations may also be affected by changes in temperature. Increased warming could accelerate the growth and reproduction rates of some Zooplankton species, leading to higher populations.

Shifts in Cod Larvae Feeding: Cod larvae primarily feed on Zooplankton as a source of energy. If the population and composition of Zooplankton change due to warmer temperatures, it could impact the availability and nutritional quality of food for cod larvae.

Disruptions to the Food Chain: Any disruptions or imbalances in the Phytoplankton-Zooplankton-Cod Larvae food chain can have cascading effects throughout the ecosystem. If the availability of Zooplankton declines or becomes less nutritious, it could lead to reduced survival and growth rates of cod larvae.

Learn more about Phytoplankton and Zooplankton at

https://brainly.com/question/15901563

#SPJ4

No need explanation, just give me the answer pls
Match the listed components of the solar system with their correct description.
Choices - use a choice only onceA.CometB.PlutoC.MarsD.SaturnE.IoF.NeptuneG.The Kuiper BeltH.Planetary RingsI.EuropaJ.JupiterK.MercuryL.The Asteroid BeltM.CeresN.CallistoO.The Oort Cloud

Answers

The  solar system component are:

A comet is a small icy thing that goes around the Sun. It usually becomes bright and has a tail when it comes close to the Sun.

What is the solar system

Pluto is a small planet that is far away from the sun. It has a strange path around the sun and used to be considered a planet but is now called a dwarf planet.

Mars - The one of four equal parts asteroid from the Sun, frequently refer to as the "Red Planet" on account of allure blushing presence generated by iron group of chemical elements on allure surface.

Read more about solar system  here:

https://brainly.com/question/2564537

#SPJ4

For decades natural resource economists have recognized the dangers of overharvesting different species of fish, as fisheries have been considered a classic example of the problems of managing a commons. In recent years there has been a dramatic expansion in the size and efficiency of fishing fleets and this has only raised further concerns over harvesting at unsustainable levels. These concerns have been reinforced by sharp declines in the global catch of fish.Suppose that you are a member of a fisheries management council that must issue regulations to dramatically reduce the harvest of a particular fish stock. What steps could be
taken to prevent such a tragedy?

Answers

To prevent the tragedy of overharvesting a particular fish stock, a fisheries management council should take the following steps:

How to prevent the tragedy

1. Set catch limits and quotas based on scientific assessments.

2. Establish fishing seasons and restricted areas to allow fish populations to reproduce and replenish.

3. Improve monitoring and enforcement efforts to ensure compliance with regulations.

4. Regulate fishing gear and techniques to minimize bycatch and unintended harm.

5. Promote sustainable fishing practices and encourage innovation in fishing technologies.

6. Collaborate with stakeholders and communities to foster understanding and compliance.

7. Engage in international cooperation to manage shared fish stocks across borders.

8. Conduct public outreach and education campaigns to raise awareness about sustainable fishing practices.

9. Continuously monitor and adapt regulations based on the effectiveness of implemented measures.

Read mroe on fishing here https://brainly.com/question/27372016

#SPJ4

1.A map produced by a local Chamber of Commerce depicts the locational advantages for moving businesses to their town. This might be an example of the use of
A reference maps
B. thematic maps
C navigational maps
D.persuasion/propaganda maps
2.In the days before satellite assisted navigation, a special publication found on board most ocean going vessels titled The Coastal Pilot, assisted the navigator in locating where (most likely) they were making landa Rather than the perspective usually found on maps, the perspective is used in this publication.
A oblique
B. gnomonic
C plan or vertical
D. profile.

Answers

This might be an example of the use of  D. persuasion/propaganda maps.

In the days before satellite assisted navigation The correct answer is C. plan or vertical.

What is the maps?

The map made by a local business organization to show the benefits of moving businesses to their town is considered  a type of map that tries to persuade or convince people. These maps are made to encourage people to do something or believe in a certain way.

In this situation, the Chamber of Commerce is using the map to show the advantages of their town as a good place for businesses. They want to attract businesses to move there.

Read more about maps here:

https://brainly.com/question/25922463

#SPJ4

Answer both of the following questions: 1. Suppose that a typical comet has a mass of 1014 kg. that it orbits the Sun once every 60 years, and that during the 3 months it is closest to the Sun it emits gases at a rate of 103 kg per second. We want to calculate how long it can survive before being entirely dissipated away by the Sun. Describe the logic of the calculation you will use, and then carry out the calculation. 2. Suppose that the Oort Cloud contains 10 billion comets. What is the total mass of all these comets? Do they add up to more or less than the mass of the Earth? Describe the logic of the calculation you will use, and then carry out the calculation.

Answers

The mass of the Earth is approximately 5.972 × 10²⁴ kg, so the total mass of all the comets in the Oort Cloud is less than the mass of the Earth.

How to calculate the value

Mass of gases emitted during this time:

Mass emitted = 10³ kg/s * (3 * 30 * 24 * 60 * 60 s) = 7.776 * 10¹¹ kg

Total orbits = Lifetime / Orbital period = Lifetime / 60

Total mass emitted = Mass emitted * Total orbits

Total mass = 10¹⁰* 10¹⁴ kg = 10²⁴ kg

The mass of the Earth is approximately 5.972 × 10²⁴ kg, so the total mass of all the comets in the Oort Cloud is less than the mass of the Earth.

Learn more about mass on

https://brainly.com/question/86444

#SPJ4

Has the cultural significance of water around the world changed
or remained the same throughout history? Give and explain both
historical examples (pre-industrial revolution) and contemporary
examples

Answers

The cultural significance of water has both changed and remained consistent throughout history.

In ancient Egypt, the Nile River held immense cultural significance. It was not only a source of freshwater for drinking and agriculture but also played a central role in religious and mythological beliefs. The annual flooding of the Nile was seen as a natural phenomenon directly linked to the fertility of the land. Egyptians believed that the river was a divine gift and that the prosperity of their civilization depended on it.

Across various cultures today, water continues to hold deep symbolic meaning as a source of life and vitality. This perspective is especially prominent in arid regions or areas where water scarcity is a significant concern. The specific cultural interpretations and practices associated with water have evolved and adapted to the changing times.

Know more about water here

https://brainly.com/question/33043253

#SPJ4

what is the value of p ?

Answers

Explanation:

The p value is a number, calculated from a statistical test, that describes how likely you are to have found a particular set of observations if the null hypothesis were true. P values are used in hypothesis testing to help decide whether to reject the null hypothesis

Compare and contrast how we define ourselves with how we define other people.

Answers

Answer:

We often define ourselves differently than we define other people, as we have access to our own thoughts, feelings, and experiences, which can shape our self-perception. We also have a tendency to judge others based on their actions or behaviors, which can be influenced by our own biases and prejudices. This contrast in the way we define ourselves versus others can lead to differences in perception and judgement, which can impact how we relate to and interact with others. To fully understand the differences in how we define ourselves versus how we define other people, it would be necessary to conduct a more in-depth study to examine the various factors that influence our self-perception and how we perceive others.

Answer:

We often define ourselves differently than we define other people, as we have access to our own thoughts, feelings, and experiences, which can shape our self-perception. We also have a tendency to judge others based on their actions or behaviors, which can be influenced by our own biases and prejudices. This contrast in the way we define ourselves versus others can lead to differences in perception and judgement, which can impact how we relate to and interact with others. To fully understand the differences in how we define ourselves versus how we define other people, it would be necessary to conduct a more in-depth study to examine the various factors that influence our self-perception and how we perceive others.

Explanation:

Provide at least two arguments supporting the theory that glycolysis is believed to be the first energy production mechanism on earth

Answers

Glycolysis is believed to be the first energy production mechanism on Earth due to its universal presence in all living organisms and its ability to function in anaerobic conditions. Its simplicity and efficiency made it a crucial energy source for early life forms.

Glycolysis is believed to be the first energy production mechanism on Earth based on two key arguments. First, glycolysis is a universal metabolic pathway found in all living organisms, including both prokaryotes and eukaryotes. This suggests that glycolysis has ancient origins and has been conserved throughout evolution, indicating its fundamental role in early life forms. Second, glycolysis is a relatively simple metabolic pathway that does not require oxygen and can occur in anaerobic conditions, making it suitable for the early Earth when oxygen levels were low or absent.

Glycolysis is a series of biochemical reactions that occur in the cytoplasm of cells, breaking down glucose into pyruvate and producing a small amount of ATP. It is an anaerobic process, meaning it does not rely on oxygen for its functioning. This is crucial because the early Earth's atmosphere was predominantly composed of gases such as methane, ammonia, and carbon dioxide, lacking significant amounts of oxygen. Therefore, glycolysis would have been advantageous as an energy production mechanism for early life forms, providing them with a means to generate ATP in an oxygen-depleted environment.

Furthermore, the simplicity of glycolysis supports its role as an ancient energy production mechanism. It involves only a few enzymatic steps and can operate under basic conditions, making it accessible to early life forms with limited cellular machinery. The ability of glycolysis to generate ATP quickly and efficiently from glucose would have provided early organisms with a vital energy source for essential cellular processes and survival. Therefore, based on its ubiquity across all forms of life and its compatibility with the conditions of the early Earth, glycolysis is considered to be the primary energy production mechanism that emerged during the early stages of life on our planet.

To learn more about planet  Click Here: brainly.com/question/29765555

#SPJ11

What are some examples kids can use to explain how we know the
earth is round/spherical?

Answers

Here are some examples that kids can use to explain how we know the Earth is round/spherical the Shape of the Horizon, Gravity and Falling Objects and Different Time Zones.

The Shape of the Horizon: Kids can observe that when they look out at the ocean or a large field, the horizon appears curved or rounded. This indicates that the Earth is not flat, as a flat surface would show a straight horizon.

Traveling Around the World: Kids can learn that when people travel long distances, they can circumnavigate the globe by going in one direction and eventually returning to their starting point. This is possible because the Earth is a sphere, and traveling in a straight line will eventually bring you back to where you started.

Gravity and Falling Objects: Kids can understand that gravity pulls everything towards the center of the Earth. If the Earth were flat, objects would fall straight down. However, we observe that objects dropped from a height, like a ball or a toy, fall towards the ground in a curved path. This is because the Earth's gravity pulls objects towards its center, which happens on a spherical surface.

Different Time Zones: Kids can explore the concept of different time zones around the world. When it is daytime in one part of the world, it is nighttime in another part. This is because the Earth is round, and as it rotates, different regions experience sunlight at different times.

Photos from Space: Kids can see pictures taken from space by astronauts and satellites, showing the Earth as a round object. These images provide visual evidence that the Earth is spherical.

By using these examples, kids can understand and explain how we know that the Earth is round/spherical. It helps them grasp the concept of Earth's shape and reinforces scientific observations and evidence.

Learn more about the Earth:

brainly.com/question/31064851

#SPJ4

Can different soils develop from the same kind of parent material? Can similar soils develop from different parent materials? Select the answers below that are correct. There may be more than one correct answer. Group of answer choices
A.Different soils can develop on similar parent materials given necessary changes in the other factors such as climate and time.
B.Parent material determines what kind of soil develops. You cannot develop different types of soil from the same parent material.
C.Similar soils can develop on different parent material given appropriate changes in the climate and length of time the soil has been developing.
D.Even changes in climate or length in time will not develop similar soils from different parent materials.

Answers

The correct answers are: A. Different soils can develop on similar parent materials given necessary changes in the other factors such as climate and time. C. Similar soils can develop on different parent material given appropriate changes in the climate and length of time the soil has been developing.

A. Different soils can develop on similar parent materials: While the parent material influences soil formation, other factors such as climate, topography, organisms, and time also play crucial roles. Variations in these factors can lead to the development of different soils from the same parent material. For example, variations in temperature, precipitation, and vegetation can result in different soil profiles even with similar parent material.

C. Similar soils can develop on different parent material: Soil formation is influenced not only by the parent material but also by other factors. Given appropriate changes in climate and sufficient time, similar soils can develop on different parent materials. For instance, under similar climatic conditions, soils with similar characteristics may form on both volcanic ash (e.g., Andisols) and loess (e.g., Mollisols).

B. Parent material determines what kind of soil develops: This statement is not entirely accurate. While parent material does influence soil properties, it is only one factor among many that contribute to soil formation. Climate, topography, organisms, and time also play significant roles.

D. Even changes in climate or length in time will not develop similar soils from different parent materials: This statement is incorrect. With appropriate changes in climate and sufficient time, similar soils can indeed develop from different parent materials. The key is that the other factors influencing soil formation need to align to create similar soil characteristics.

In summary, soil formation is a complex process influenced by multiple factors, and while parent material is important, it alone does not solely determine the type of soil that develops.

Learn more about the soil formation:

brainly.com/question/16858993

#SPJ4

What is the center point of a data set when all of the values are listed in order?
the mean
the median
the mode
the range

Answers

The median is the correct answer
The median I think is the correct answer

What would occur if all of the ice on Greenland and Antarctica melted?
a.
glacial transgression
b.
marine transgression
c.
continental transgression
d.
marine regression
e.
continental regression

Answers

If all of the ice on Greenland and Antarctica were to melt, it would have significant consequences for the Earth's landmasses and oceans. Hence option B is correct.

The melting of this immense ice would lead to a rise in sea levels globally. Low-lying coastal areas and islands would be particularly vulnerable, facing increased risk of flooding and submersion.

The resulting scenario would be a combination of marine transgression and continental regression. Marine transgression refers to the encroachment of the sea onto land, and this would occur as sea levels rise due to the melting ice. Coastal regions and areas near river mouths would be gradually submerged, leading to the loss of habitats, infrastructure, and the displacement of populations.

At the same time, there would be continental regression, as the newly melted ice would contribute a massive influx of freshwater into the oceans. This could disrupt ocean currents and affect global climate patterns, leading to changes in precipitation, temperatures, and weather conditions worldwide.

Overall, the melting of all ice on Greenland and Antarctica would result in a complex interplay of marine transgression and continental regression, causing widespread and far-reaching impacts on coastal regions, ecosystems, and the global climate system.

Learn more about marine transgression here

https://brainly.com/question/31741410

#SPJ4

Experiments of human activities on rivers in mokopane

Answers

Explanation:

Human activities, including mining, agriculture, and urbanisation, have led to increased levels of pollution in the river. This has impacted both the water quality and the health of the river's aquatic life. Human activities and development in the region are also a threat to the river.

In this activity, we will look at the different sediment types and determine which would be the best for water well construction.
- Which layer was the water able to pass through the easiest?
- Describe the permeability and porosity of this layer.
- Which layer was the hardest for water to pass through?
- Is the output what you expected to see, based on the permeability of each of the layers?
- Watch the rain fall over the urban area. What do you see happening on the surface?
- What happens to the water level over 4 years below the urban area?
- What happens if you leave the scenario running for at least 10 years?

Answers

Answer:

When it comes to constructing a well for water usage, one of the most crucial factors to consider is sediment types. In this activity, we aim to analyze the various sediment types and determine which would be the best for water well construction. In doing so, we will be able to identify the layer that allows water to pass through the easiest and which sediment layer poses a challenge to water passing through.

From our experiment, we observed that the sediment layer that water was able to pass through the easiest had both high permeability and porosity. Permeability is the measure of how easily water is able to flow through a medium, while porosity refers to the amount of empty space or voids within a material. The high permeability and porosity of this layer make it ideal for water well construction as it allows for efficient water filtration.

On the other hand, we observed that water had difficulty passing through the sediment layer with low permeability and low porosity levels. The output from our experiment was what we expected to see, based on the permeability and porosity levels of each layer. We confirmed that high permeability and porosity led to higher water flow rates and vice versa.

Moving on to the urban area, we noticed that when rain fell, water could not penetrate the impervious surface, and it resulted in surface runoff. This can lead to drainage issues and increased risk of flooding.

Monitoring the water level over four years below the urban area, we observed a gradual increase in the water level. However, if we left the scenario running for at least ten years, we could potentially reach the groundwater table. It is important to note that groundwater recharge occurs when water flows down from the surface and seeps into the ground, while groundwater discharge occurs when water flows out of the ground and to the surface.

In conclusion, our experiment provides insights into the importance of sediment types when it comes to water well construction. We saw that a layer with high permeability and porosity allows for more efficient water filtration, while a layer with low permeability and porosity poses a challenge in water flow. We also learned about the implications of urbanization on water drainage and the potential long-term effects on groundwater levels.

Explanation: i hoped this helped with your project * also my explanation in my answer is not complicated.*

State 10 successful entrepreneurs in the tourism industry in India

Answers

The tourism industry in India has grown significantly in the last few years. As a result, there has been a surge of successful entrepreneurs in the industry. The following are ten successful entrepreneurs in the tourism industry in India:

Darshan PatelDeep KalraDhruv ShringiAditya GhoshRitesh AgarwalBhavish AggarwalFalguni NayarAnkur JainChetan MainiByju Raveendran

1. Darshan Patel:

Darshan Patel is a co-founder of Vini Cosmetics. It is the company that owns the Fogg brand of deodorants. Vini Cosmetics is one of the leading companies in India that provides fragrance products.

2. Deep Kalra:

Deep Kalra is the founder of MakeMyTrip, which is one of the most successful online travel agencies in India.

3. Dhruv Shringi:

Dhruv Shringi is the co-founder of Yatra, which is one of the largest online travel companies in India.

4. Aditya Ghosh:

Aditya Ghosh is the CEO of OYO Rooms, which is a leading hospitality company in India.

5. Ritesh Agarwal:

Ritesh Agarwal is the founder and CEO of OYO Rooms.

6. Bhavish Aggarwal:

Bhavish Aggarwal is the co-founder of Ola Cabs, which is one of the largest ride-hailing companies in India.

7. Falguni Nayar:

Falguni Nayar is the founder and CEO of Nykaa, which is a leading online retailer of beauty products in India.

8. Ankur Jain:

Ankur Jain is the founder of Haptik, which is a leading chatbot platform in India.

9. Chetan Maini:

Chetan Maini is the founder of Mahindra Reva, which is an electric car company in India.

10. Byju Raveendran:

Byju Raveendran is the founder of BYJU's, which is a leading education technology company in India. These are some of the most successful entrepreneurs in the tourism industry in India.

Learn more about entrepreneurs at https://brainly.com/question/353543

#SPJ11

At a certain point during the orbit of the Earth around the Sun, if you are standing on the Tropic of Cancer, the Sun will be directly overhead at noon. At this point it is also the day with the longest hours of sunlight in the Northern Hemisphere. This point of the Earth's orbit is called: (choose all answers that different people in different places on Earth might call this part of the orbit) The winter solstice for the Northern hemisphere The summer solstice for the Northern hemisphere The vernal equinox for the Southern hemisphere The autumnal equinox for the Southern hemisphere The autumnal equinox for the Northern hemisphere The vernal equinox for the Northern hemisphere The summer solstice for the Southern hemisphere The winter solstice for the Southern hemisphere

Answers

This point of the Earth's orbit is called:  summer solstice for the Northern hemisphere" and "The winter solstice for the Southern hemisphere."

What is the orbit?

The summer solstice for the Northern hemisphere is when the Sun is directly above the Tropic of Cancer at noon. It is also the day when there is the most sunlight in the Northern Hemisphere.

The winter solstice for the Southern hemisphere is the specific time during the Earth's orbit when it is winter in the southern part of the world. During this time, the Sun is directly above the Tropic of Capricorn at noon, and it is the day with the least amount of sunlight in the Southern Hemisphere.

Read more about orbit  here:

https://brainly.com/question/855117

#SPJ4

What impacts of an increase in the
concentration of CO2 in the atmosphere may have on the intensity
(in terms of the amount of rainfall), the arrival time, and the
duration of the South Asian Monsoon?
1. Explain in your own words why South Asian Monsoon is so much stronger than the North American Monsoon 2. What impacts of an increase in the concentration of {CO} 2 in the atmosphere ma

Answers

An increase in the concentration of CO₂ in the atmosphere may lead to changes in the intensity, arrival time, and duration of the South Asian Monsoon.

The South Asian Monsoon is a seasonal weather phenomenon that brings heavy rainfall to the Indian subcontinent and neighboring regions. It is primarily driven by temperature differences between landmasses and oceans, along with atmospheric pressure gradients. An increase in CO₂ concentration in the atmosphere can influence these factors and potentially impact the monsoon system.

Intensity of rainfall: Higher CO₂ levels can contribute to global warming, leading to increased atmospheric moisture content. This can result in more intense rainfall during the monsoon season, potentially leading to higher precipitation rates and increased flood risks.

Arrival time: Changes in atmospheric circulation patterns due to CO₂⁻ induced climate change can affect the timing of the South Asian Monsoon. Shifts in pressure systems and wind patterns may delay or advance the onset of the monsoon, altering the timing of rainfall and agricultural activities.

Duration: CO²⁻ induced climate change can also influence the duration of the monsoon season. Variations in temperature and atmospheric conditions can affect the length of the monsoon, potentially shortening or prolonging the period of rainfall.

To learn more about South Asian Monsoon  here

https://brainly.com/question/31784981

#SPJ4

What impacts of an increase in the

concentration of CO2 in the atmosphere may have on the intensity

(in terms of the amount of rainfall), the arrival time, and the

duration of the South Asian Monsoon?

1. Explain in your own words why South Asian Monsoon is so much stronger than the North American Monsoon 2. What impacts of an increase in the concentration of {CO} 2 in the  atmosphere may have on the intensity (in terms of the amount of rainfall), the arrival time, and the duration of the South Asian Monsoon?

Chapter 14: Glaciers:
12. What are glaciers and where and why do they exist?
13. Know how alpine glaciers move. (Explain the two ways).
14. List all the landscapes resulted of flowing glaciers (alpine). Know how to identify them on a figure.
15. What are some of the depositional features of glaciers? What kind of materials do they deposit?

Answers

12. Glaciers are large bodies of ice that form over many years from the accumulation and compaction of snow in areas where snowfall exceeds melting.

13. Alpine glaciers move through two primary mechanisms: internal deformation and basal sliding.

14. Landscapes resulting from flowing alpine glaciers include U-shaped valleys, cirques, aretes, horns, and moraines. U-shaped valleys are wide and have steep sides, formed by the erosion of glaciers.

15. Depositional features of glaciers include moraines, drumlins, eskers, and erratics. Moraines are ridges or mounds of rock and sediment deposited by glaciers.

12. They exist in polar regions, high mountains, and some colder regions at lower elevations. Glaciers form due to a combination of low temperatures and sufficient snowfall that exceeds the rate of snowmelt.

13. Internal deformation refers to the ice slowly flowing downhill under the pressure of its weight, causing the ice crystals to rearrange and deform. Basal sliding occurs when the ice slides over a thin layer of meltwater or debris at the glacier's base, lubricating its movement.

14. Cirques are bowl-shaped depressions at the head of a valley where glaciers originate. Aretes are sharp, narrow ridges between two adjacent glaciers, while horns are pyramidal peaks formed by the erosion of several cirques. Moraines are accumulations of rock and sediment carried by glaciers and deposited along their margins. These landscapes can be identified on topographic maps or aerial photographs.

15. Drumlins are elongated hills or mounds with a smooth, streamlined shape formed by the deposition of glacial till. Eskers are long, winding ridges of sand and gravel deposited by meltwater streams flowing within or beneath glaciers. Erratics are large boulders transported and deposited by glaciers, often different from the surrounding rock types. Glaciers deposit various types of materials, including till (unsorted mixture of sediment), outwash (sorted sediment deposited by meltwater), and erratics (large transported boulders).

Learn more about glaciers here:

https://brainly.com/question/28474050

#SPJ4

How much time did the shortcut between east and west save?

Answers

Answer:

The Panama Canal shortcut greatly reduces the time for ships to travel between the Atlantic and Pacific oceans, enabling them to avoid the lengthy, hazardous Cape Horn route around the southernmost tip of South America via the Drake Passage or Strait of Magellan. The canal handles more vessel traffic than had ever been envisioned by its builders. By 2012, more than 815,000 vessels had passed through the canal. In 2017 it took ships an average of 11.38 hours to pass between the canal's two locks.

Explanation:

How do the cases of the West African Sahel and Machakos, Kenya,
illustrate the debates about the causes of environmental change in
Africa?

Answers

The cases of the West African Sahel and Machakos, Kenya, provide insights into the debates surrounding the causes of environmental change in Africa.

Both regions have experienced significant environmental challenges, but the causes and dynamics differ, reflecting the complexities of environmental change on the continent.

West African Sahel: The Sahel region has faced environmental degradation, desertification, and food insecurity. One debated cause is the role of human activities, such as overgrazing, unsustainable agricultural practices, and deforestation. Critics argue that population growth and resource exploitation contribute to environmental degradation. However, proponents highlight the significance of climatic factors, particularly droughts and changing rainfall patterns, as primary drivers of desertification and land degradation.

Machakos, Kenya: Machakos is known for its success in environmental restoration and community-led initiatives. The region experienced land degradation, soil erosion, and water scarcity. The debates here revolve around the importance of local actions and community resilience. Supporters emphasize the role of community-led efforts, including sustainable land management practices, reforestation, and water conservation. They argue that community empowerment and indigenous knowledge contribute to environmental restoration and improved livelihoods.

These cases highlight the complex interplay between human activities and climatic factors in driving environmental change. While the Sahel debate emphasizes the interaction between natural and anthropogenic factors, the Machakos case underscores the significance of community-led initiatives and local solutions. Both cases demonstrate the need for a holistic understanding of environmental change, considering social, economic, and ecological factors, as well as the importance of context-specific approaches to address the challenges faced in different regions of Africa.

Learn more about the environmental change:

brainly.com/question/28549893

#SPJ4

examine this map of the continent of africa. At which latitudes
is the atmostphere rising? at which latitudes is it sinking? how
does this atmospheric circulation influence the continent's
climates

Answers

The atmosphere is rising near the equator (0° latitude) and sinking near the subtropics (around 30° latitude). This atmospheric circulation, known as Hadley cells, influences Africa's climates by creating distinct wet and dry seasons.

The rising motion of air near the equator creates a low-pressure zone and leads to the formation of the Inter-Tropical Convergence Zone (ITCZ). This zone is characterized by ascending air, resulting in high rainfall and tropical climates in regions near the equator, such as the Congo Basin and the coastal areas of West Africa.

On the other hand, the sinking motion of air near the subtropics creates a high-pressure zone and causes the formation of the subtropical deserts, such as the Sahara Desert in North Africa and the Namib Desert in southwestern Africa. The descending air suppresses cloud formation and leads to dry and arid conditions in these regions.

The combination of rising and sinking air masses creates a pattern of atmospheric circulation that influences Africa's climates, resulting in the formation of distinct climatic zones across the continent, including tropical rainforests, savannas, deserts, and Mediterranean climates.

To learn more about atmospheric circulation here

https://brainly.com/question/788466

#SPJ4

Match the listed components of the solar system with their correct description. Choices - use a choice only once A. Europa B. Pluto C. The Asteroid Belt D. Uranus E. The Kuiper Belt F. lo G. Jupiter H. Venus 1. Neptune J. The Oort Cloud K. Saturn L. Callisto M. Comet N. Ganymede O. Mercury P. Ceres Q. Planetary Rings R. Mars S. Earth

Answers

The correct match of the listed components of the solar system with their descriptions.

A. Europa - One of Jupiter's moons known for its subsurface ocean and potential for life.

B. Pluto - A dwarf planet located in the Kuiper Belt beyond Neptune's orbit.

C. The Asteroid Belt - A region located between the orbits of Mars and Jupiter that contains numerous rocky objects called asteroids.

D. Uranus - The seventh planet from the Sun, characterized by its unique tilted axis and icy composition.

E. The Kuiper Belt - A region of the solar system beyond Neptune's orbit that contains icy bodies, including Pluto.

F. Io - One of Jupiter's moons known for its intense volcanic activity.

G. Jupiter - The largest planet in the solar system, known for its distinct bands of clouds and the Great Red Spot.

H. Venus - The second planet from the Sun, known for its thick atmosphere and extreme temperatures.

1. Neptune - The eighth planet from the Sun, characterized by its blue color and strong winds.

J. The Oort Cloud - A region of icy objects located at the outer edge of the solar system, believed to be the source of long-period comets.

K. Saturn - The sixth planet from the Sun, known for its prominent rings made of ice and rock particles.

L. Callisto - One of Jupiter's moons, known for its heavily cratered surface and the presence of an underground ocean.

M. Comet - A small celestial object composed of dust and ice that orbits the Sun, often characterized by a glowing coma and tail when it approaches the inner solar system.

N. Ganymede - The largest moon in the solar system and one of Jupiter's moons, larger than the planet Mercury.

O. Mercury - The smallest and closest planet to the Sun, characterized by its extreme temperature variations.

P. Ceres - The largest object in the asteroid belt between Mars and Jupiter, now considered a dwarf planet.

Q. Planetary Rings - Flat, disk-like structures composed of particles orbiting around certain planets, including Saturn and Uranus.

R. Mars - The fourth planet from the Sun, known for its reddish appearance and the presence of polar ice caps.

S. Earth - The third planet from the Sun, known for its diverse ecosystems and the presence of liquid water.

To know more about dwarf planet visit:

https://brainly.com/question/28308770

#SPJ11

population density of indonesia

Answers

Answer:

144.79 people per square kilometer

The current population density of Indonesia in 2023 is 144.79 people per square kilometer, a 0.74% increase from 2022.

Explanation:

Which city would have the coldest temperature?
Group of answer choices
D
E
F
C

Answers

It is difficult to determine the city with the coldest temperature without specific information. However, generally speaking, the city with the coldest temperature is usually in the northern hemisphere, where winters are particularly harsh.

The coldest temperature ever recorded was -128.6°F (-89.2°C) at the Soviet Union's Vostok Station in Antarctica. Some of the coldest cities in the world are in Russia, such as Oymyakon, Verkhoyansk, and Yakutsk, all located in the Siberian region of the country.

In addition to Russia, other countries in the northern hemisphere with cold climates include Canada, Norway, Sweden, Finland, and Iceland. In conclusion, it's difficult to pinpoint the city with the coldest temperature without specific information.

To know more about temperature visit:-

https://brainly.com/question/15709135

#SPJ11

The main answer to the question is that we cannot determine which city would have the coldest temperature based solely on the provided group of answer choices (D, E, F, C).

To determine the coldest city, we need more information such as the specific locations of each city and their average temperatures. Without this information, we cannot accurately compare and identify the city with the coldest temperature.

If we had additional information about the cities, such as their geographical location or climate data, we could compare their average temperatures or record lows to determine which city is likely to have the coldest temperature. However, since no such information is given in the question, it is not possible to provide a definitive answer.

In summary, without more information, it is not possible to determine which city would have the coldest temperature among the given answer choices (D, E, F, C).

To know about temperature visit:

#SPJ11

Tive Filut
The continental crust is more dense than the oceanic crust. True False

Answers

The given statement " The continental crust is more dense than the oceanic crust" is false.

The continental crust is less dense than the oceanic crust. The continental crust is primarily composed of granitic rocks, which have a lower density compared to the basaltic rocks that make up the oceanic crust. The average density of the continental crust is around 2.7 g/cm3, while the average density of the oceanic crust is about 3.0 g/cm3.

This density difference is primarily due to the difference in composition and rock types. The continental crust is thicker and less dense because it contains lighter minerals and has a higher proportion of low-density rocks like granite.

In contrast, the oceanic crust is thinner and denser because it consists mainly of denser basaltic rocks. The density contrast between the continental and oceanic crust plays a significant role in plate tectonics and the formation of different landforms and ocean basins on Earth's surface.

To learn more about continental crust here

https://brainly.com/question/7072276

#SPJ4

The complete question is:

The continental crust is more dense than the oceanic crust. True False

1. According to the lecture, describe at least one way by which a felsic, low density crust, can form out of an ultramafic mantle. Answer in no more than two complete, grammatical sentences
2. According to the lecture, what do Idaho's igneous rocks tell us about our region's geologic past? Answer in no more than two complete sentences

Answers

One way a felsic, low density crust can form out of an ultramafic mantle is through the process of fractional crystallization, where the minerals with higher silica content crystallize and separate from the remaining melt, leading to the formation of a felsic crust.

How to explain the information

Idaho's igneous rocks provide insights into the region's geologic past, revealing evidence of volcanic activity and the presence of different magma compositions, which help to understand the tectonic processes and geologic history of the area.

One way a felsic, low density crust can form out of an ultramafic mantle is through the process of fractional crystallization,

Learn more mantle on

https://brainly.com/question/349072

#SPJ4

Samtse ranging sea-level degree annual dzongkhag lies from at 300-800meters temperature an classmate varies Date Page elevation above and celsius. The Dzongkhag receives rainfall of 1500-4000mm. from mean 15 to 30 ​

Answers

The diverse climate and elevation range in Samts create a rich and dynamic environment that influences the daily lives, livelihoods, and ecological systems of the local communities. Understanding these climatic factors is essential for sustainable development and resource management in the dzongkhag.

Samtse is a dzongkhag located in Bhutan, characterized by its varying elevation and climate. The dzongkhag ranges in elevation from 300 to 800 meters above sea level. The temperature in Samtse varies throughout the year, with a mean range of 15 to 30 degrees Celsius.

The varying elevation in Samtse contributes to the diverse climate patterns experienced in the region. Higher elevations tend to have cooler temperatures, while lower elevations experience warmer conditions. This range of elevation also influences other climatic factors such as precipitation and vegetation patterns.

In terms of rainfall, Samtse receives an annual rainfall ranging from 1500 to 4000 millimeters. The amount of rainfall varies depending on the specific location and elevation within the dzongkhag. Higher elevations often experience more rainfall due to orographic effects, where moist air is forced to rise and condense as it encounters mountains.

The combination of varying elevation, temperature, and rainfall in Samtse contributes to the region's unique ecological and agricultural characteristics. The different microclimates within the dzongkhag support a range of vegetation types, including subtropical forests in lower elevations and temperate forests in higher elevations. The availability of water from rainfall also plays a crucial role in supporting agriculture and the cultivation of crops in the region.

for more questions on environment

https://brainly.com/question/24182291

#SPJ8

Sensible heat is distributed across the earth’s surface, with what percentage of the total is accounted for by sensible heat transfer over land, and how much is accounted for by sensible heat transfer over the oceans? How much does latent energy transfer contribute to the total Earth’s surface heat budget?

Answers

Sensible heat is the heat that is transferred between a surface and the air above it by conduction and convection.

How to explain the information

It is a major component of the Earth's surface energy budget, accounting for about 20% of the total.

The percentage of sensible heat transfer over land and oceans is as follows:

Land: 20%

Oceans: 80%

This is because the oceans have a much larger heat capacity than land, so they can store more heat without a significant change in temperature. As a result, the oceans release less sensible heat to the atmosphere than land.

Latent energy transfer, on the other hand, is the heat that is transferred between a surface and the air above it by the process of evaporation and condensation. It accounts for about 80% of the total Earth's surface energy budget.

Learn more about conduction on

https://brainly.com/question/893656

#SPJ4

Other Questions
2. A nozzle 3 m long has a diameter of 1.3 m at the upstream end and reduces linearly to 0.45 m diameter at the exit. A constant flow rate of 0.12 m3 /sec is maintained through the nozzle. Find the acceleration at the midpoint of the nozzle. Hint: velocity at any point is equal to the flow rate divided by the area of the pipe at that point. (Ans. a=0.02579 m/s/s] BackgroundThe following skeleton code for the program is provided in words.cpp, which will be located inside your working copydirectory following the check out process described above.int main(int argc, char** argv){enum { total, unique } mode = total;for (int c; (c = getopt(argc, argv, "tu")) != -1;) {switch(c) {case 't':mode = total;break;case 'u':mode = unique;break;}}argc -= optind;argv += optind;string word;int count = 0;while (cin >> word) {count += 1;}switch (mode) {case total:2cout According to the Sedimentary Rock Identification Process, which sediment grain is described as "shades of yellow, milky white to hazy gray or colorless"?rock and mineral fragmentsquartzK-feldsparmuscovite Lab Assignment: Secure Coding and Defensive Programming TechniquesNote: For this Lab Assignment, you require a personal computer with a C/C++ compiler.In this Lab Assignment you identify and apply secure coding and defensive programming techniques to enable secure software development.For each of the code fragments below, identify the type of software flaw(s) found and suggest a way to fix the issue(s). It is recommended that you identify the problem without using a computer. After identifying the problem, you may use a computer to verify your answer.Code Fragment #1void sampleFunc(char inStr[]){char buf[10];buf[9]='\0';strcpy(buf,inStr);cout The inside of a house is kept at a balmy 28 C against an average external temperature of 2 C by action of a heat pump. At steady state, the house loses 4 kW of heat to the outside. Inside the house, there is a large freezer that is always turned on to keep its interior compartment at -7 C, achieved by absorbing 2.5 kW of heat from that compartment. You can assume that both the heat pump and the freezer are operating at their maximum possible thermodynamic efficiencies. To save energy, the owner is considering: a) Increasing the temperature of the freezer to -4 C; b) Decreasing the temperature of the inside of the house to 26 C. Which of the two above options would be more energetically efficient (i.e. would save more electrical power)? Justify your answer with calculations. Question:Given that A = - log T, what is the corresponding absorbance for a solution that has 75% transmittance (T=0.75) at 595 nm? When describing a community, a biologist would identify every The Charlie Company manufactures helmets for the Department of Defense (DOD) at its Jonesboro, Arkansas factory that runs on an 8-shift/3 shifts per day/ 5 days per week schedule. The Customer, DOD, is very much interested in Vendor Productivity hence it requires productivity reports on a regular schedule as part of its contracts. You are the factory manager and have been working with your three shift supervisors to collect the necessary information and determine various productivity measures. The DOD, as well as the Bureau of Labor Statistics (BLS) and Department of Energy (DOE) are all interested in those aspects of your data that relate to their respective areas of responsibility. The aggregate DOD demand for helmets is 1,000 per day and the Charlie Company needs 11 employs per shift at an hourly rate of $30.00 to meet the demand. 1,500KWH of electricity is used in the daily manufacturing process. The process equipment is 7 years old and reaching the end of its useful life. II. One of The Charlie Company's engineers and an equipment mechanic implement an improvement to the equipment which reduces electricity consumption to 1,200 KWH and enables the factory to produce 1100 helmets per day. What are the new productivity for: f) Per shift= 366.67. (1,100/3) g) Per employee =100.(1,100/11) h) Per Labor hour = 4.17.(1,100/264) i) Per $ dollar of Labor cost = 0.14.(1,100/7920) j) Per KWH of electricity used = 0.92. (1,100/1,200) What is the percent (\%) change in productivity resulting from the equipment improvement for III. Kevlar, a product of the DuPont Company, is one of the raw materials used in the helmets and it provides strength to the helmets by which to counter impacts of all type. m) For the situation in II above, what is the productivity of Kevlar if two pound of it is required for each helmet? Kevlar costs $2.00 per pound. The polymer scientists at DuPont have significantly improved the formula for Kevlar such that only one pound of the improved version is required for each helmet. The new Kevlar costs $3.00 per pound. n) What is the productivity of the new Kevlar? o) What is the change in productivity for Kevlar given that the firm switches from the old to the new? q) Is it cost effective for the Charlie Company to buy and use the new Kevlar? Tengo que tomar clases de actuacin para ser ___________. Yesterday, you entered into a futures contract to buy 62,500 at $1. 60/. Your initial margin was $4000. Your maintenance margin is $2,500. At what settle price do you get a margin call? what the answer to this Ok, this question is only relevant for those of you who plan to retire somedaySavings accounts (at banks) are pretty safe.Bonds (both corporate and government) are generally quite safe.Stocks can be risky, but generally have a wider potential for return on investment.So, the question is, what is the risk vs. reward picture that you are shooting for at age 60 (if you plan to retire at 65)? In other words, discuss both the relative risk and return on investment for each of the above classes of assets, and also what assumptions about the inflation rate and current (short term) interest rates are important to note? Increasing POS reduces bad debts, provides a better cash position, reduces expenses, and increases patient satisfaction when conducted properly. POS is calculated by dividing POS payments by the total patient cash collected. HHS has identified the industry median benchmark for POS as 13.6% and the top 10% POS benchmark as 41.4%. HHSs current POS performance is 35.6%, and the executive team has determined that a 5-percentage point increase is needed to stay competitive (target = 40.6%). A Lean Six Sigma team was formed. POS is a metric that heavily relies on the Patient Access team, or PA. PA is responsible for several taskspatient scheduling, registration, and financial clearance. The "scheduling" tasks are typically completed by a centralized PA team for multiple hospital facilities. During scheduling, PA reps receive a doctors order for a patient. The order is like a permission slip for specific medical services the doctor deems necessary. The doctor or even the patient related to the order can call scheduling to reserve an appointment for the services that correspond to what is written in the order. PA reps need to verify that the order is complete and accurate, coordinate time for services, and provide patients with pre-service instructions. After the patients information is logged into the scheduling system, 3 | P a g e Copyright 2016, Simplilearn, All rights reserved. it will be queued up for the PA registration team to complete the registration process. The PA will call the patient and confirm their identity and collect demographics such as address, family, emergency contact, etc. The patient's health insurance provider(s) will also be confirmed as part of the PA registration process. PA registration can be completed at a hospital facility or by a centralized team. Lastly, PA Financial Clearance will verify patient health benefits to ensure they exist and to determine if the procedure or service for the patient is covered. If authorization is required, the PA Financial Clearance will request authorization for services from the patients health insurance provider. Services performed without authorization lead to rejected claims. Also, during PA Financial Clearance, the PA rep will counsel the patient about their liability (how much their insurance provider says they need to pay for the services) and collect the payment. Any payment received is considered POS since its before 7 days post discharge. Financial clearance can also be performed at the hospital facilities or by a centralized team. Summary patient cash data for HHSs 39 hospital facilities for a year is presented in Table 1. The table also indicates if the PA team for each facility is centralized or not. Table 2 provides an overall monthly trend for POS performance. The team identified the facilities with POS performance above the target and researched the activities they have in place, hoping to find commonalities or key drivers. They are: ensure proper patient education on benefits and liability ask for payment have a financial counseling policy reduce number of patients that leave without financial clearance have accurate tools to help estimate patient liability or responsibility utilize devices that allow patient collections at the patients bedsidePlease solve the following:a) Using the data given in following Table , how would you scope the focus area of the project?b) what could be affinity categories for the key drivers that impact POS performance? HONDA MOTOR CO .give a detailed 3 to 4 paragraphs of personal recommendations to the HONDA Motor Co. that could help them improve in all aspects of their business. Ways to improve financially, socially, technologically, Customer service, Marketing(in states and global), innovation-wise, and Use of resources/suppliers Which of the following is NOT an obstacle to effective problem solving? OA. Confirmation Bias OB. Algorithms OC. Heuristics OD. Mental Test Glits Co ltd, a key client, is requesting a loan from its bank to fund a plant expansion project. This project is expected to enhance Glits capacity by 20%. BDC & Co conducted market research and informed the board that Glits Co would be able to sell the increased output. Mr Namushe, the finance director, recently called you and requested a reference from your audit firm regarding Glits Cos capacity to meet its obligations and the feasibility of the business idea. Your audit team is getting ready to start the audit for the fiscal year that concluded on February 29, 2020. Discuss any ethical and professional matters raised in the above case The file 1902 is a weather record dataset collected from one station in U.S. in 1902. Each record is a line in the ASCII format. The following shows one sample line with some of the salient fields annotated. This file is available on the Moodle site of this subject. The objective of this task is to extract some useful information from the file in Spark-shell, perform basic aggregations and save the data into HBase. All operations must be completed in the BigDataVM virtual machine for ISIT312. Download the file to the VM, start Hadoop key services, and upload it to HDFS. Create a script scalascript3.txt in Text Editor (gedit) which implements the following Spark-shell operations: (1) Create a DataFrame named weatherDF based on 1092 with the following fields: # the first 25 characters as a record identifier USAF weather station identifier < month: String> # air temperature (2) Compute (and return) the maximum, minimum and average temperatures for each month in weatherDF. (You can use DataFrame operations or SQL statements.) Deliverables A script scalascript3. txt and a PDF report report3.pdf that summarises all of your Bash and HBase input (except the operations in scalascript3 . txt) and output. The script scalascript3. txt must be executable in Spark-shell. The PDF report must demonstrate your correct operations and results of this task. 1. Load the real seismic data file Book_Seismic_Data.mat and display shot gathers 11 till 14 using the wiggle plotting with a scale of your choice.2. With a, = 1.8, 2.2 and 3.4, use both the multiplication by a power of time and the expo- nential gain function corrections on the selected shot gathers. Similarly, use the RMS AGC and the instantaneous AGC methods on the same shot gathers. Display and compare your re- sults with the data before applying the required amplitude corrections. In your opinion, which method results in the best amplitude correction? Why?3. Mute the bad traces of shot gather 16 as in Section 3.2. Then apply the method of multiplication by a power of time with a = 2.0 and all shot gathers and save the processed data with its header information as Book_Seismic_Data_gain.mat to be used later on. ASSEMMENT 14 & 15 DRAW THE THREF VIEWS OF THESE TSOFETRIC THE LIPTH IS LBLOCKS, DEPTH 4 , HEKHT 4 (a) A cellular radio system in a large city employs hexagonal cells of radius (of a circle enclosing the hexagon) 5 km and has base station antennas of height of 50 m. What minimum cluster size is required to achieve a frequency re-use distance of 30 km and what would be the worst carrier to interference ratio in this case, assuming an omni-directional radiation from base stations at a frequency of 950 MHz and that only one nearest interfering base station needs to be considered? (Use the Hata formula to determine the power law). The Okumura-Hata model is given by L(urban) (dB) = 69.55+26.16log f-13.82 log h - a(h) + (44.9-6.55log h)log d where a(h) is the correction factor, fe is the frequency of operation, htx is the antenna height and d is the distance. (c) Refer to 2(a), in one cell of this cellular network, there is radio shadowing by a 65 m high hill. Assuming that the hill can be treated as a knife-edge diffractor, determine the relative magnitude of the field strength compared with that for free space propagation when the receiving antenna is 5 km from the transmitter at a height of 1.5 m and the hilltop is at the centre of the transmitter to receiver path. Ignore the effect of ground or other reflections. (8 Marks)