Answer:
Step-by-step explanation:
3 2/5 -1 3/5 = 1.8
what is the measure of angle 1 in degrees?
Answer:
39°
Step-by-step explanation:
angles are alternate exterior angles making them congruent
for example:
jenny places a total of red easter eggs in several green baskets and a total of orange easter eggs in some blue baskets. each basket contains the same number of eggs and there are at least eggs in each basket. how many eggs did jenny put in each basket?
If each basket contains the same number of eggs and there are at least 4 eggs in each basket, Jenny put 3 red eggs in each of 6 baskets, and 4 orange eggs in each of 6 baskets.
Let's call the number of eggs in each basket "x." We know that Jenny placed a total of 18 red eggs, so the number of baskets with red eggs can be represented as 18/x. Similarly, the number of baskets with orange eggs can be represented as 24/x.
Since we know that each basket contains at least 4 eggs, we can set up the inequality 4 ≤ x.
Now we can use this information to set up an equation:
18/x + 24/x = total number of baskets
Simplifying this equation, we get:
42/x = total number of baskets
But we also know that the total number of baskets is an integer (you can't have a fraction of a basket), so x must be a factor of 42.
The factors of 42 are 1, 2, 3, 6, 7, 14, 21, and 42. But we also know that each basket must contain at least 4 eggs, so we can eliminate 1, 2, and 3 as possible values of x.
Therefore, the possible values of x are 6, 7, 14, 21, and 42. But we also know that there are 18 red eggs and 24 orange eggs, so x must be a factor of both 18 and 24.
The common factors of 18 and 24 are 1, 2, 3, and 6. Therefore, the only possible value of x is 6.
To learn more about count click on,
https://brainly.com/question/12699248
#SPJ4
Complete question is:
Jenny places a total of 18 red Easter eggs in several green baskets and a total of 24 orange Easter eggs in some blue baskets. Each basket contains the same number of eggs and there are at least 4 eggs in each basket. How many eggs did Jenny put in each basket?
Which of the following correctly describes the domain of the function shown below?
Except than x = 1, all real numbers fall within the function's domain.
Why can't a domain consist entirely of real numbers?Since there are no limitations on what we can substitute for x, the domain of a function, f(x), is all real numbers because any real numbers would make f(x) a defined function. As a result, when this is not the case, the domain of a function, f(x), is not all real numbers.
The rational function r(x) = 2x/(x-1) is defined as follows.
So, we set the denominator to zero and solve for x in order to determine the domain of r(x):
x - 1 = 0
x = 1
Hence, x = 1 is the only value of x that causes the denominator to equal 0. R(x) therefore has a domain of all real numbers other than x = 1.
We can express the domain as follows in interval notation:
(-∞, 1) U (1, ∞)
Except than x = 1, all real numbers fall within the function's domain.
To know more about function visit:-
https://brainly.com/question/14830166
#SPJ1
Question:
Which of the following correctly describes the domain of the function shown below?
r(x) = 2x x-1
A. {x:x0}
B. {x: x = 1}
c. x all .real .numbers}
D. xx1}
write the number 150 as a sum of three numbers so that the sum of the products taken two at a time is a maximum. (enter the three numbers as a comma-separated list.)
The three numbers are 50, 50, and 50, which give a maximum sum of products taken two at a time of 5000.
To find the sum of three numbers whose product is maximum, we need to distribute the numbers as equally as possible. Therefore, we divide 150 by 3, giving 50. This means that the sum of the three numbers is 150, and their product is maximized.
To check that this is indeed the case, we can calculate the sum of the products taken two at a time: 50x50 + 50x50 + 50x50 = 5000, which is the maximum possible sum.
Therefore, the three numbers are 50, 50, and 50.
To know more about sum of products, refer here:
https://brainly.com/question/4523199#
#SPJ11
there is a group of five children, where two of the children are twins. in how many ways can i distribute $8$ identical pieces of candy to the children, if the twins must get an equal amount of candy?
There are 1960 different ways to distribute 8 identical pieces of candy to the five children, where the twins get an equal amount of candy.
First, distribute the candy to the twins.
Split the 8 pieces of candy into two equal parts for the twins using combinations:
C(8, 4)
This means selecting 4 pieces of candy from the 8 identical pieces for one twin, and the remaining 4 pieces will automatically go to the other twin.
C(8, 4) is calculated as:
[tex]^8C_4 = \dfrac{8!}{4!(8-4)!}[/tex]
= 8! / (4! * 4!)
= (8 * 7 * 6 * 5) / (4 * 3 * 2 * 1)
= 70
Now, you have distributed 4 pieces of candy to each of the twins. Y
In this case, you have 6 pieces of candy to distribute among 3 children, and you can use two dividers (bars) to separate the candy for each child.
This can be represented as:
OO|OO|OO
The two bars split the 6 pieces of candy into three sections for the three children.
So, you have C(6 + 2, 2) ways to distribute the remaining candy:
[tex]^{6+2}C_2 = \dfrac{8!}{2!(8-2)!}[/tex]
= 8! / (2!(8 - 2)!)
= 8! / (2! * 6!)
= (8 * 7) / (2 * 1)
= 28
Now, the total number of ways to distribute the candy
Total ways = C(8, 4) * C(8, 2) = 70 * 28 = 1960
So, there are 1960 different ways to distribute.
Learn more about Combination here:
https://brainly.com/question/29595163
#SPJ12
Using a standard deck of cards, Rayna drew one card and recorded its value. She continued this for a total of 200 draws. The table shows the frequency of each card drawn.
Card A 2 3 4 5 6 7 8 9 10 J Q K
Frequency 8 12 11 17 14 12 15 18 13 20 16 24 20
Based on the table, what is the experimental probability that the card selected was a 2, 3, or 4?
The experimental probability of drawing the cards, 2, 3, or 4, from the deck of 52 cards, with the frequency obtained from 200 draws is about 15.5%
What is an experimental probability?An experimental probability is the probability of a specified event taking place, based on repeated trials or sampling.
The number of draws Rayna drew from the standard deck of cards = 200 draws
The frequency of the cards drawn, obtained from the frequency table are;
Frequency of 2 = 8
Frequency of 3 = 12
Frequency of 4 = 11
The experimental probability of drawing a card that has a value of 2 or a card that has a value of 3 or a card that has a value of 4 is therefore;
P(2, 3, 4) = (Frequency of 2 + Frequency of 3 + Frequency of 4)/The total number of draws Rayna drew
P(2, 3, 4) = (8 + 12 + 11)/200 = 0.155 = 15.5%
The experimental probanbility of drawing a 2, or a 3, or a 4 is therefore; 15.5%Learn more on experimental probabilities here: https://brainly.com/question/29070862
#SPJ1
a cable tv receiving dish is in the shape of a paraboloid of revolution. find the location of the receiver, which is placed at the focus, if the dish is 6 feet across at its opening and 2 feet deep.
the receiver is located at (0, 0, 2.25 feet) or (0, 0, 27 inches).To find the location of the receiver, we first need to determine the equation of the paraboloid.
The standard equation for a paraboloid of revolution with a vertical axis is:
z = [tex](x^2 + y^2)[/tex]/(4f)
Where:
z is the height at any point (x, y) on the paraboloid.
x and y are the horizontal coordinates of the point.
f is the focal length of the paraboloid, which is half the depth of the dish.
In this case, the dish is 6 feet across at its opening, so the diameter is 6 feet and the radius is 3 feet. Therefore, the maximum value of x and y is 3 feet. The depth of the dish is given as 2 feet.
Using these values, we can solve for the focal length:
2 = [tex](3^2 + 3^2)[/tex]/(4f)
2 = 18/(4f)
f = 18/8 = 9/4 = 2.25 feet
Now that we have the value of f, we can find the location of the receiver, which is placed at the focus of the paraboloid. The focus is located at (0, 0, f).
Therefore, the receiver is located at (0, 0, 2.25 feet) or (0, 0, 27 inches).
Learn more about equation here
https://brainly.com/question/29657992
#SPJ4
x° = ½ • (30 + 2x – 30)
Simplifying the expression resulted to x° = x
How to solve for xThe expression x° = ½ • (30 + 2x – 30) can be simplified as follows:
The term 30 - 30 simplifies to 0, so we can remove it from the expression:
x° = ½ • (30 + 2x - 30)
x° = ½ • (2x)
We can simplify the fraction ½ by dividing the numerator by the denominator:
x° = x
Therefore, the solution to the equation x° = ½ • (30 + 2x – 30) is x = x°. In other words, any value of x is equal to its corresponding value in degrees.
Learn more about simplifying at:
https://brainly.com/question/28595186
#SPJ1
WHat is 9. 30 x 6. 6 I cant seem to get it
Answer:
61.38
Step-by-step explanation:
9.30×6.6=61.38
btw u could've used a calculator
which distribution is described by predicting the number of girls amoung 5 children randomly selected from a group of 10 girls and 10 boys
The distribution described is a binomial distribution.
A binomial distribution describes a discrete probability distribution, which means the values are countable. This distribution has two possible outcomes, in this case, either a girl or a boy. The probability of getting a girl is 0.5, as there are 10 girls and 10 boys in the group.
The binomial distribution is described by the following formula: P(x) = nCx * p^x * (1-p)^n-x, where n is the number of trials, x is the number of successes, and p is the probability of success in each trial.
In this case, n=5, x= number of girls, and p=0.5. Thus, P(x)= 5Cx * 0.5^x * 0.5^5-x. To predict the number of girls among 5 randomly selected children from the group, we need to calculate P(x) for x=0,1,2,3,4, and 5. This will give us the probabilities of selecting 0, 1, 2, 3, 4, and 5 girls in the group.
The sum of all these probabilities should be equal to 1, indicating that all the possibilities have been accounted for. This binomial distribution will help us predict the number of girls among 5 randomly selected children from the group of 10 girls and 10 boys.
To know more about binomial distribution refer here:
https://brainly.com/question/14565246
#SPJ11
The graph below was drawn with output on the vertical axis and input on the horizontal axis. What does
this graph indicate about the relationship between the input and the output?
The οutput axis is independent οf what the input is, as the slοpe is zerο in the graph.
What is graph?A graph is a structure made up οf a cοllectiοn οf things, where sοme οbject pairs are cοnceptually "cοnnected." The items are represented by mathematical abstractiοns knοwn as vertices, and each pair οf cοnnected vertices is referred tο as an edge.
Here the given :
The graph belοw was drawn with οutput οn the vertical axis and input οn the hοrizοntal axis,
⇒ Slοpe = 0 (can be seen frοm graph),
Frοm the graph, y = 4 is the graph's equatiοn, and the slοpe οf the graph is zerο. The result will always be the same, regardless οf the input. Because the οutput is unifοrm thrοughοut, the input dοesn't really care what happens tο it.
Therefοre, the οutput axis is independent οf what the input is, as the slοpe is zerο in the graph.
To learn more about graph refer the below link
https://brainly.com/question/10712002
#SPJ1
Please help me if you do thank you
Answer:
Step-by-step explanation:
From Point 1 to Point 2 on the trail, the bike rider is traveling uphill, which means that the change in kinetic energy is negative because the rider is slowing down due to the work required to move against gravity. The rider is losing kinetic energy and converting it into potential energy.
On the other hand, the change in potential energy from Point 1 to Point 2 is positive because the rider is gaining height and storing potential energy due to the work done against gravity. As the rider climbs uphill, the potential energy of the rider-bike system increases.
So, to summarize:
Change in kinetic energy from Point 1 to Point 2: Negative
Change in potential energy from Point 1 to Point 2: Positive
There's a roughly linear relationship between the length of someone's femur (the long
leg-bone in your thigh) and their expected height. Within a certain population, this
relationship can be expressed using the formula h = 2.41f + 54.8, where h
represents the expected height in centimeters and f represents the length of the
femur in centimeters. What could the number 2.41 represent in the equation?
O
The change in expected height for every one additional centimeter of femur
length.
The change in expected femur length for every one additional centimeter of
height.
The expected height for someone with a femur length of 2.41 centimeters.
The expected height for someone with a femur length of 54.8 centimeters.
Here option A is correct: "The change in expected height for every one additional centimeter of femur length."
What is a centimetre?
A centimetre is a metric unit of length equal to one-hundredth of a meter. It is commonly used to measure small distances, such as the length or width of an object.
What is meant by femur length?
Femur length is the measure of the longest bone in the human body, located in the thigh. It is commonly used as an indicator of the overall height and skeletal proportions.
To know more about femur length visit:
brainly.com/question/30887754
#SPJ1
Fill in the blanks to explain what
happens between the two teams in
the beginning of the game.
The second point of the game is
scored by
Before getting
by Mateo and making a basket, Aren
takes a
in order to
The twins realize
stay
they need to
opponents if they are going to win.
their
Answer:
Step-by-step explanation:
4. The matrix below describes the price of 1 kg of four items in Bhutan in ngultrums. Use matrix multiplication to show the prices in United States (U.S.) dollars in a matrix. (Use the exchange rate, 1 U.S. dollar = Nu 44.32.) Beef Cheese Rice Flour P = [80 280 25 16] STATES
The matrix that shows the prices in U.S. dollars is:
[1.81 6.32 0.56 0.36]
How to get the matrix in U.S. dollars?Here we have a simple row matrix which can be written as:
[80 280 25 16]
You can see this as a row vector or something like that, notice that if we multiply this by an scalar, we just need to multiply each element by an scalar.
Now, we know that:
1 dollar = 44.32 Nu
then:
1 Nu = (1/44.32) dollars.
So to get the matrix in dollars, just multiply each number by (1/44.32), then we will get:
(1/44.32)*[80 280 25 16] = [80/44.32 280/44.32 25/44.32 16/44.32]
= [1.81 6.32 0.56 0.36]
Learn more about matrices at
https://brainly.com/question/11989522
#SPJ1
oranges costs $2 per pound and starfruit cost $5 per pound. the table shows ned's total utility from eating various amounts of oranges and starfruits. how many pounds of oranges and starfruit should ned eat, if ned has $26?
The correct option is A) 3; 4; no money. Ned should eat 3 pounds of oranges and 4 pounds of starfruit, as this combination maximizes his total utility and fully utilizes his $26 budget, resulting in a total utility of 280.
He should eat 3 oranges and 4 pounds of star fruits and he will have no money left over
Because by comsuming this combination it will maximize Calvin's total utility and his money will be distributed correctly according to the utility maximization
Like if he consume 8 orange and 2 pound of star fruit in option(B)
8 units of orange consumption is not given but we'll assume it will give total utility of 84
And 2 pound of star fruit will give 130
130 + 84 = 214
Opt (c) = only 5 star fruit no orange
= 5 Star fruit = 250 total utility
Opt (D) = is not possible because
4 orange will take $2 each = 4×2 = $8
And 5 pounds of star fruit takes $5 each = $5×5 = $25
$25 +$8 = $33 but he have only $26 so option (d) cant be considered
Opt (a)
3 orange = 60
And 4 pounds of star fruit = 220
220 + 60 = 280 total utility so this option gave us maximum total utility and the $26 is Fully utilized
3×$2 = $6
4 × $5 = $20
$6 + $20 = $26
Learn more about budget here: brainly.com/question/17756883
#SPJ4
Complete question is in the image attahed below
In the past month, Henry rented 1 video game and 4 DVDs. The rental price for the video game was $3.40. The rental price for each DVD was $4.10. What is
the total amount that Henry spent on video game and DVD rentals in the past month?
Answer:
Let x = the cost of a movieLet y = the cost of a gameUsing these variables,
we can set up equations.3x + 5y = 42 eq19x + 7y = 72 eq2
We have here a system of equations, where we have two or more equations with two or more different variables.
We use the elimination method to solve for the variables.
Multiply eq1 by 3. Keep eq2.
9x + 15y = 126 eq1
9x + 7y = 72 eq2
Subtract eq2 from eq1 to eliminate the x terms.
8y = 54y
= 6.75
This rental cost of one video game is $6.75
Substitute the value of y into eq1 to solve for x.
This will give you the rental cost of one movie.
Step-by-step explanation:
a measurement of the diameter of a disk has an uncertainty of 1.4 mm. how many measurements must be made so that the diameter can be estimated with an uncertainty of only 0.5 mm? round the answer to the next largest integer.
Number of measurements that must be made so that the diameter can be estimated with an uncertainty of only 0.5 mm is 16
To estimate the diameter with an uncertainty of 0.5 mm, we need to reduce the uncertainty to that level. Let's call the number of measurements we need to make "N". We can use the formula for the standard deviation of the mean
σ_mean = σ / sqrt(N)
where σ is the standard deviation of the individual measurements. In this case, the uncertainty of each measurement is given as 1.4 mm, which we can assume is the standard deviation.
To reduce the uncertainty to 0.5 mm, we need
0.5 = 1.4 / sqrt(N)
Solving for N, we get
N = (1.4 / 0.5)^2 = 15.68
≈ 16
Learn more about standard deviation here
brainly.com/question/23907081
#SPJ4
100 POINTS AND WILL GIVE BRAINLIEST!!!
what is 3 - 5 written as a decimal? :3
example : 1 - 5 = 0.2
Answer:0.6
Step-by-step explanation: 4 divided by 5 = 0.6
please make me brainalist and keep smiling dude I hope you will be satisfied with my answer is updated
Answer: 3/5 as a decimal is 0.6
Answer: 3/5 as a decimal is 0.6Let us see how to convert 3/5 to a decimal using two methods.
Answer: 3/5 as a decimal is 0.6Let us see how to convert 3/5 to a decimal using two methods.Explanation
Answer: 3/5 as a decimal is 0.6Let us see how to convert 3/5 to a decimal using two methods.ExplanationMethod 1: How to write 3/5 as a decimal using the division method?Step 1: To convert any fraction to decimal form, we just need to divide its numerator by denominator.
Step 2: Here, the fraction is 3/5 which means we need to perform 3 ÷ 5
Step 3: This gives the answer as 0.6. So, 3/5 as a decimal is 0.6
Method 2: How to write 3/5 as a decimal by converting the denominator to powers of 10?Step 1: Find a number that we can multiply by the denominator of the fraction to make it 10 or 100 or 1000 and so on. In this case, if we multiply the denominator by 2 it becomes 10. Therefore, we will multiply both the numerator and the denominator by 2 which will make it 3/5 = (3 × 2) / (5 × 2) = 6/10
Step 2: After multiplying both numerator and denominator by that number, we have converted it into its equivalent fraction.
Step 3: Then, we write down just the numerator by putting the decimal point in the correct place, that is, one space to the left starting from the right-hand side for every zero in the denominator. This means 6/10 = 0.6
Step 3: Then, we write down just the numerator by putting the decimal point in the correct place, that is, one space to the left starting from the right-hand side for every zero in the denominator. This means 6/10 = 0.6Irrespective of the methods used, the answer to 3/5 as a decimal number will always remain the same. Therefore, now we know what is 3/5 in decimal form.
Step 3: Then, we write down just the numerator by putting the decimal point in the correct place, that is, one space to the left starting from the right-hand side for every zero in the denominator. This means 6/10 = 0.6Irrespective of the methods used, the answer to 3/5 as a decimal number will always remain the same. Therefore, now we know what is 3/5 in decimal form.Thus, 3/5 as a decimal is 0.6
2 + 4.8 + -11.4 = ?
Answer:
23 but not
Step-by-step explanation:
the pediatrician writes an order for robinul injection 35 mcg iv now. how many milliliters will the nurse administer? round the answer to the nearest hundredth.
The pediatrician writes an order for robinul injection 35 mcg iv now. The nurse will administer 0.035 ml of Robinul injection for 35 mcg of medication.
The question is about calculating the number of milliliters a nurse should administer for a 35 mcg Robinul injection. Let's first understand the meaning of Robinul.Robinul is a medication used to treat excess sweating or salivation in the human body. It reduces the secretion of fluids by blocking the chemicals that stimulate their production. It is available in the form of tablets, injection, or solution.
The nurse is instructed to administer 35 mcg of Robinul injection now.Let's calculate the number of milliliters of Robinul injection to be administered by the nurse.
Now, 1 ml = 1000 mcg35 mcg = (35/1000) ml= 0.035 ml (rounded to the nearest hundredth).
for such more question on administer
https://brainly.com/question/28454439
#SPJ11
find the distance, d, of ab a=(2,-3) b=(4,5)
The distance D between points A and B is approximately 8.25 units.
What is the distance between the given pair of points?The distance formula used in finding the distance between two points is expressed as;
D = √( ( x₂ - x₁ )² + ( y₂ - y₁ )² )
Where (x1, y1) and (x2, y2) are the coordinates of the two points.
Using the given points, we have:
a = (2, -3)
b = (4, 5)
We have:
D = √( ( 4 - 2 )² + ( 5 - (-3) )² )
D = √( ( 2 )² + ( 5 + 3 )² )
D = √( 2² + 8² )
D = √( 4 + 64 )
D = √68
D = 8.25
Therefore, the distance is 8.25 units.
Learn more about the distance formula here: brainly.com/question/24509115
#SPJ1
at 95% confidence, how large a sample should be taken to obtain a margin of error of 0.04 for the estimation of a population proportion? assume that past data are not available for developing a planning value for p*. (round your answer up to the nearest whole number.)
A sample size of at least 61 should be taken to obtain a margin of error of 0.04 for the estimation of a population proportion at a 95% confidence level.
Given data:
To determine the sample size required for estimating a population proportion with a given margin of error at a 95% confidence level, you can use the following formula:
[tex]n=\frac{Z^2 \cdot p(1-p)}{E^2}[/tex]
n is the required sample size.
Z is the Z-score corresponding to the desired confidence level. For a 95% confidence level, the Z-score is approximately 1.96.
p is an estimate of the population proportion (since you don't have prior data, you can use p =0.5 for maximum variability, which results in the largest sample size requirement).
E is the desired margin of error, which is 0.04 in this case.
Substitute the values into the formula:
[tex]n=\frac{1.96^2*0.5^2}{0.04^2}[/tex]
The value of n = 60.26
Since the sample size is a whole number, n = 61
Hence, a sample size of at least 61 should be taken for the estimation of a population proportion at a 95% confidence level.
To learn more about confidence interval, refer:
https://brainly.com/question/16807970
#SPJ12
John wants to know the volume of his gold ring in cubic centimeters. He gets a glass in the shape of a rectangular prism with a base
3
cm
3 cm3, start text, space, c, m, end text by
2
cm
2 cm2, start text, space, c, m, end text and fills the glass with
3. 1
cm
3. 1 cm3, point, 1, start text, space, c, m, end text of water. John drops his gold ring in the glass and measures the new height of the water to be
3. 7
cm
3. 7 cm3, point, 7, start text, space, c, m, end text. What is the volume of John's ring in cubic centimeters?
The volume of Laura's gold ring is 21.6 cubic centimeters.
To find the volume of the gold ring, we need to determine the volume of water that is displaced when the ring is dropped into the glass.
The initial volume of water in the glass can be calculated as the product of the base area and the height of the water:
V1 = base area x height of water = 7 cm x 4.5 cm x 8.8 cm = 277.2 cm³
When the gold ring is dropped into the glass, it displaces some of the water, causing the water level to rise. The new volume of water in the glass can be calculated using the same formula, but with the new height of the water:
V2 = base area x height of water with ring = 7 cm x 4.5 cm x 9.2 cm = 298.8 cm³
The volume of the gold ring can be calculated by subtracting the initial volume of water (before the ring was added) from the new volume of water (after the ring was added):
Volume of gold ring = V2 - V1 = 298.8 cm³ - 277.2 cm³ = 21.6 cm³
Learn more about volume here
brainly.com/question/21416050
#SPJ4
Th given question is incomplete, the complete question is:
Laura wants to know the volume of her gold ring in cubic centimeters. She gets a rectangular glass with a base 7 cm by 4.5 cm and fills the glass 8.8 cm high with water. Laura drops her gold ring in the glass and measures the new height of the water to be 9.2 cm. What is the volume of Laura'5 ring in cubic centimeters? cm? 8.8 cm 9.2 cm 4.5 cm 4.5 cm 7cm 7 cm
Answer:
THE OTHER GUY IS WRONG the answer is 3.6cm
Step-by-step explanation:
I had this question on khan
find the next two terms 9.56,9.57,9.58,9,59
The next two terms in this arithmetic progression is 7.60 and 7.61.
What is arithmetic progression?An arithmetic prοgressiοn (AP) is a sequence where the differences between every twο cοnsecutive terms are the same. Fοr example, the sequence 2, 6, 10, 14, … is an arithmetic prοgressiοn (AP) because it fοllοws a pattern where each number is οbtained by adding 4 tο the previοus term. A real-life example οf an AP is the sequence fοrmed by the annual incοme οf an emplοyee whοse incοme increases by a fixed amοunt οf $5000 every year.
We know the Arithmetic progression formula:
[tex]\rm a_{n}=a_{1}+(n-1)d[/tex]
[tex]\rm a_n[/tex] = the nᵗʰ term in the sequence
[tex]\rm a_1[/tex] = the first term in the sequence
d = the common difference between terms
Here 4 terms are given
5th and 6th terms are to be found,
Thus,
a₁ = 9.56
d = (9.56 -9.57) = 0.01
n = 5
Then
5th term is :
aₙ = a₁ + (n - 1)d
aₙ = 9.56 + (5 - 1)0.01
aₙ = 9.56 + (4)0.01
aₙ = 9.56 + 0.04
aₙ = 7.60
6th term is :
aₙ = a₁ + (n - 1)d
aₙ = 9.56 + (6 - 1)0.01
aₙ = 9.56 + (6)0.01
aₙ = 9.56 + 0.05
aₙ = 7.61
Thus, The next two terms in this arithmetic progression is 7.60 and 7.61.
Learn more about arithmetic prοgressiοn
https://brainly.com/question/30364336
#SPJ1
a recent survey found that of all adults over wear glasses for driving. in a random sample of adults over , what is the probability that at least six wear glasses?
Let p be the probability of an adult over 50 wearing glasses for driving. Since we don't know the value of p, we can't use the binomial distribution directly. However, we can use the normal approximation to the binomial distribution since n is large (assuming n * p >= 10 and n * (1-p) >= 10).
Let X be the number of adults over 50 wearing glasses for driving in a random sample of n adults. Then X ~ Binomial(n, p) can be approximated by a normal distribution with mean µ = n * p and standard deviation σ = sqrt(n * p * (1-p)).
We want to find the probability that at least six adults over 50 in a random sample of n wear glasses for driving. This is equivalent to finding P(X >= 6) = 1 - P(X < 6) using the normal approximation.
To apply the normal approximation, we need to standardize the random variable X:
Z = (X - µ) / σ
Using continuity correction:
P(X >= 6) = P(X > 5.5)
Z = (5.5 - n * p) / sqrt(n * p * (1-p))
We can use the standard normal distribution table or calculator to find the probability:
P(Z >= (5.5 - n * p) / sqrt(n * p * (1-p)))
Since we don't know the value of p, we can use a conservative estimate of p = 0.5 (assuming 50% of adults over 50 wear glasses for driving). Then:
P(Z >= (5.5 - n * 0.5) / sqrt(n * 0.5 * (1-0.5)))
For example, if we sample n = 100 adults over 50, the probability of at least six wearing glasses is:
P(Z >= (5.5 - 100 * 0.5) / sqrt(100 * 0.5 * (1-0.5)))
= P(Z >= 0.5)
Using a standard normal distribution table or calculator, P(Z >= 0.5) = 0.3085.
Therefore, the probability of at least six adults over 50 wearing glasses for driving in a random sample of 100 is approximately 0.3085 or 30.85%.
For more details probability click here:
https://brainly.com/question/30034780#
#SPJ11
at the beginning of a population study, a city had people. each year since, the population has grown by . let be the number of years since start of the study. let be the city's population. write an exponential function showing the relationship between and .
The exponential function that shows the relationship between the city's population y and the number of years t since the start of the study is [tex]y = 390000 * (1.073)^t[/tex]
Population tends to change with time. It might increase or decrease. Let y be the city's population after t years since the start of the study, and let [tex]Po[/tex] be the initial population at the start of the study. We can use the formula for exponential growth to represent the relationship between y and t:
Final population = Initial population x (growth rate)^years
[tex]y = Po*(1+0.073)^t[/tex]
[tex]y = Po* (1.073)^{(t)[/tex]
Substituting the values in the above equation we get the following equation:
[tex]y = 390,000*(1.073)^t[/tex]
The above function when represented in exponential form will be equal to [tex]y=390,000*(e)^{(0.073t)[/tex]
Learn more about Exponential function at:
brainly.com/question/2456547
#SPJ4
Refer to complete question below:
At the beginning of a population study, a city had 390,000 people. Each year since, the population has grown by 7.3% . Let t be the number of years since start of the study. Let y be the city's population. Write an exponential function showing the relationship between y and t .
A rectangle has an area of (24x + 30) square units. Select all of
the dimensions that are possible for this rectangle.
width 6 units; length (4x + 5) units
width 4 units; length (6x + 7) units
width 3 units; length (21x + 27) units
width 8 units; length (3x + 4) units
width 2 units; length (15 + 12x) units
Answer:
We can check which dimensions are possible for the rectangle by finding the product of the width and length and seeing if it equals the given area of (24x + 30) square units.
Let's check each option:
width 6 units; length (4x + 5) units
Area = 6(4x + 5) = 24x + 30
This option is possible.
width 4 units; length (6x + 7) units
Area = 4(6x + 7) = 24x + 28
This option is not possible since the area is not equal to (24x + 30).
width 3 units; length (21x + 27) units
Area = 3(21x + 27) = 63x + 81
This option is not possible since the area is not equal to (24x + 30).
width 8 units; length (3x + 4) units
Area = 8(3x + 4) = 24x + 32
This option is not possible since the area is not equal to (24x + 30).
width 2 units; length (15 + 12x) units
Area = 2(15 + 12x) = 30 + 24x
This option is not possible since the area is not equal to (24x + 30).
Therefore, the only possible dimension for the rectangle is width 6 units and length (4x + 5) units.
the average american home swelled from 983 square feet in 1950 to 2,349 square feet in 2004. what was the percent change in that time period?
The percent change in size from 983 to 2,349 square feet was 138.8%.
The average American home swelled from 983 square feet in 1950 to 2,349 square feet in 2004, representing a change of 1366 square feet. This change can be expressed as a percent change by dividing the change (1366 square feet) by the starting value (983 square feet). The resulting percent change is 138.8%.
To calculate the percent change, we can use the following equation:
Percent Change = (Ending Value - Starting Value) / Starting Value x 100
Using this equation, the percent change in the size of the average American home is calculated as follows:
Percent Change = (2349 - 983) / 983 x 100 = 138.8%
This means that the average American home increased by 138.8% in size between 1950 and 2004. This is an impressive rate of growth and may be attributed to a number of factors. In 1950, the United States was in the midst of a period of rapid economic growth, and this may have allowed people to buy larger homes and upgrade to more luxurious accommodations. In addition, advances in technology and manufacturing may have made larger homes more affordable for more people.
Whatever the cause of the growth in home size, it is clear that the average American home saw a substantial increase in size between 1950 and 2004. The percent change in size from 983 to 2,349 square feet was 138.8%.
To know more about percent change refer here:
https://brainly.com/question/29835344
#SPJ11
find the simple interest. round to the nearest cent
principal = $600
rate = 2%
time in years = 2
Answer:
To find the simple interest on a principal of $600 at a rate of 2% for a time period of 2 years, we can use the formula:
Simple Interest = (Principal * Rate * Time)
where Rate is the annual interest rate as a decimal, and Time is the time period in years.
In this case, we have:
Principal = $600
Rate = 0.02 (2% expressed as a decimal)
Time = 2 years
So, the formula becomes:
Simple Interest = ($600 * 0.02 * 2)
= $24
Therefore, the simple interest on a principal of $600 at a rate of 2% for 2 years is $24.