The correct answer is 0.1875 g/cm3
Explanation:
Density is a quality of substances and solids related to the amount of matter per volume. Due to this, to find the volume it is necessary to know both the volume and the mass. Moreover, density affects other properties such as buoyancy because solids with a higher density than a liquid will sink if they are immersed in it. In the case of the cork, the density can be found following this process:
density = mass ÷ volume
density = 3 grams ÷ 16 cm3
density =0.1875 grams per cubic centimeter or 0.1875 g/cm3
Answer:
0.1875 cm3/ grams
Explanation:
Density is mass divided by volume
Therefore, 3 divided by 16 is 0.1875 g or cm3
The figures below are surface weather maps from Superstorm 1993, which produced blizzard conditions across much of the eastern U.S. Hurricane-force winds were also reported along with scattered tornadoes. Overall, the storm system killed 318 people. The weather maps have isobars (labeled in millibars), low pressure, high pressure, cold fronts, warm fronts, stationary fronts, and precipitation intensity (the darker the shaded area, the more intense the precipitation) all plotted for you. Use this information to answer the following questions: What happened to the intensity of the storm as it moved from the Gulf of Mexico north-northeast across the eastern United States? Note the path of Superstorm 1993 from the top to bottom in the figures on the left. This storm produced a copious amount of rain and snow across the eastern U.S. How could the path of the storm have an influence on the amount of precipitation that fell?
Hello. You forgot to present the maps needed to answer that question. The maps are attached.
Answer and Explanation:
a. Through the maps we can perceive a tendency to increase the intensity of the storm, as it moves from the Gulf of Mexico towards the easternmost part of the USA. You will be able to conclude this when looking at the map from March 13, 1993, at that point it will be possible to see the increase in the shaded area that indicates the increase in storm intensity.
B. It is possible to notice a very low pressure forming as you approach the Gulf of Mexico region. This low pressure causes the air to rise which adds a lot of moisture to the atmosphere. The tendency is that as the air rises, it gets colder and colder and begins to condense forming clouds that will cause rain in the region where it is concentrated.
TIME REMAININO
01:55:04
Water scarcity is increasing for all of the following reasons except
A demand is increasing
B. the population of the globe is increasing
C, the amount of freshwater on Earth is decreasing
D more land is being farmed
Please select the best answer from the choices provided
O A
(
ОВ
ОС
NE
Suba!
Mark this and return
©
e Type here to search
Answer:
D more land is being farmed
Explanation:
More land being farmed is not a reason why there is an increasing water scarcity on the earth surface.
This is the weakest of all points given in the choices.
Water scarcity is increasingly becoming a global phenomenon. Water is needed virtually all lives on the earth surface. They hydrological cycle provides us with an overview of how water moves in the different spheres of the earth.
Scarcity of water is predominantly the loss of water on the earth surface. It can be due to;
Increasing demand for Agricultural, domestic and industrial use. Global increase in population which requires more water needs.A loss in the fresh water reserve due to global warming and other climate related issue. Other natural phenomenon such as flooding, salt water intrusion, drought can affect availability of water.Answer: I think it's D. more land is being farmed
Explanation:
jack knows the surface area of a cylinder and its radius. He wants to find the cylinder height. He needs to rewrite the formula A= 2pie r (r + h ) to find the cylinder's height (h) in terms of the cylinder's surface area (a ) and its radius (r). which is the correct formula
Answer:
27
Explanation:
Using complete sentences,analyze the primary causes of the London Fog in 1952.
Answer:
Alternative Name: The Killer Fog of 1952
Great Smog of London, lethal smog that covered the city of London for five days (December 5–9) in 1952, caused by a combination of industrial pollution and high-pressure weather conditions. This combination of smoke and fog brought the city to a near standstill and resulted in thousands of deaths. Its consequences prompted the passing of the Clean Air Act four years later, which marked a turning point in the history of environmentalism.
The phenomenon of “London fog” long predated the crisis of the early 1950s. Known as “pea-soupers” for their dense, yellow appearance, such all-encompassing fogs had became a hallmark of London by the 19th century. But polluted fog was an issue in London as early as the 13th century, due to the burning of coal, and the situation only worsened as the city continued to expand. Complaints about smoke and pollution increased in the 1600s, when ultimately ineffective legislation was passed under King James I to restrict coal burning. Rapidly increasing industrialization that began in the late 1700s made conditions even worse.
These hazes were not natural formations of the atmosphere: water vapour would stick to particulates released by coal-burning factories, producing dark and heavy clouds that impaired visibility. This variety of fog later came to be known as smog (a merging of the words smoke and fog), a term invented by a Londoner in the early 20th century.
hope i helped you in some way ^^
The main cause of the fogs in London was the industrial revolution that took place in 1952.
What is London fog?The London fog is also called the pea fog that overtook London and concerned the entire city leading to a drastic change in the climate and environment of the London city.
The fog was thick and created breathing problems for the people on a large scale. This fog was the turning point in the history of London.
Find out more information about the London fog.
brainly.com/question/4206662
What important development occurred at the end of the Pennsylvanian Epoch?
Answer:
The end of the Pennsylvanian Period was marked by a dry climate, the gradual disappearance of the vast coastal coal swamps and changes in plants and animals. These changes were brought about by the assemblage of the super-continent, Pangaea, and retreat of the shallow seas from interior continental areas.
Explanation:
i got it from google lol
Answer:
Person above me Is absolutely right
Explanation:
100 Next answer
This supercontinent formed at the end of the ____________________ Era.
A. The Paleozoic Era began with the breaking up of the super continent called Pannotia. At the end of the period (about 300 million years later) the land masses had merged again to form a new super continent called Pangaea.
Use the map to help you choose the word or phrase
that best completes each sentence.
Most ancient Egyptian cities were located
The population density of ancient Egypt was highest
The map shows that the ancient Egyptian civilization
largely depended on
A map showing the pattern of human settlement of
modern Egypt looks
this map.
Answer:
there is no map no map.:
Answer:
Most ancient Egyptian cities were located
✔ along the Nile River .
The population density of ancient Egypt was highest
✔ on the Nile River delta .
The map shows that the ancient Egyptian civilization largely depended on
✔ fresh water and fertile soil .
A map showing the pattern of human settlement of modern Egypt looks
✔ similar to
this map.
Explanation:
edge
Describe the “wetlands thesis.” Why was it possible for our ancestors to build more settled communities in wetlands, as opposed to other ecologies?
Answer:
Wetlands are places which contain more moisture content than the arid or dry land. It is believed that the wet region have less strength . As we all know anything which is in contact with water have lesser strength due to water molecules harm the chemical bonding in the object.
Ancient times house construction was done using natural rocks and stones and which reacted using physical bond hence the ancient people were successful as it used physical reaction and hence its strength was not affected by the moister. Present day homes are built using chemical bonds which told two layers adhere hence moisture affect its strength and binding.
Which popular video game franchise has released games with the subtitles World At War and Black Ops?
Answer:
Call of Duty.
Explanation:
Call of Duty was first published on the 29th of October, 2003 by Activision. Call of duty refers to a popular first-person shooter video game franchise focused on developing games that are related to the World War II, Cold War, space, new and futuristic world series.
The software developers who designed and developed Call of Duty are Infinity ward, Raven software, Sledgehammer games and Treyarch.
In November 2008, Call of Duty: World at War was developed by Treyarch and released for Playstation 3, Xbox 360, Microsoft Windows, Nintendo DS, and Wii. Similarly, Call of Duty: Black Ops was released in November 2010 worldwide for different gaming platforms.
Hence, Call of Duty is a popular video game franchise that released games with the subtitles World At War and Black Ops. Also, Call of Duty can be played either by a single player or multi-players.
14. If A, B, and C are collinear with B between A and C, then AB + BC = AC.
Which postulate or theorem supports this statement? Draw a picture to
help.*
Addition Property of Equality
Angle Addition Postulate
Segment Addition Postulate
O Definition of a Midpoint
A reader can best combine the information in the
excerpts to
understand that managing the moon landing while
the lunar module had 30 seconds left of fuel required
intense concentration.
O understand that having only 30 seconds of fuel
could easily have become a disaster while
Armstrong was landing the lunar module.
o understand that Armstrong radioed mission control
when the lunar module landed on the moon at 4:18
p.m. EDT.
O understand that it was impossible for the lunar
module to land on the moon with only 30 seconds
left of fuel.
Answer:
A. understand that managing the moon landing while the lunar module had 30 seconds left of fuel required intense concentration.
Explanation:
From the excerpts given, it is mentioned that the lunar module was out of fuel and had less than thirty seconds of fuel left and as a result, the margin of error was very slim or even nonexistent.
This put pressure on the control tower as they had to keep their focus, knowing that any mistake would be fatal.
Answer:
The answer is Understand that managing the moon landing while the lunar module had 30 seconds left of fuel required intense concentration.
A for short
Explanation:
I got it right Lol
edge 2022
2
드
의 1.2
3
3 6 2.
23 의
98
30
L36
y
2.
Answer:
omgash this isnt english
Most of earths water supply is made up of
Which is the best reason for John to bring snacks to his study sessions?
to make his study sessions enjoyable
to avoid leaving to get food
to avoid taking breaks
to ensure he has enough caffeine
Answer:I believe the first answer is the right choice because this way he seems to concentrate more and will have to take breaks. But it will be important for him to take breaks from time to time as well.
Explanation:
Bena thinks that dissolving more salt in water causes the mixture's freezing temperature to change.
Which is the best type of scientific investigation for Bena to use to study this?
A.an experimental investigation, because it can provide the most data
B.a comparative investigation, because it uses a wide range of variables
C.an experimental investigation, because it allows for the control of variables
D.a comparative investigation, because it would take the least amount of time
Answer:
I believe its C
Explanation:
C because when you'll have control over the variables (salt and water) You can measure how much salt or water is actually needed to determine the freezing temp.
How do you think physical geography shaped the expansion of the United States?
Answer:
Explanation:
The US had a large amount of open land to the west available for people to migrate to, it led to large numbers of people wanting the cheap land to move to the US and expand it
Who knows answer to this? ;-;
Answer:
Look at the diagram and there coordinates, Then find the number given on either or x or y scale. then when your one with both longitude and latitude your location should be there. (or look it up).
Explanation:
Which of the following belongs in the biosphere?
Answer:
rocks
Explanation:
Triangle ABC
A= (4y + 10)
C= (3x)
B= 75
What is y?
Answer:
y = 5
Explanation:
Given parameters:
Angle A = 4y + 10
Angle B = 75
Angle C = 3x
Unknown:
Value of y = ?
Solution:
The triangle is an isosceles triangle with two equal sides and angles.
Here;
3x = 75
x = [tex]\frac{75}{3}[/tex] = 25°
In a triangle the sum of angles is 180°, so;
4y + 10 + 75 + 3(25) = 180
4y + 160 = 180
4y = 180 - 160
4y = 20
y = 5
which two triangles are congruent? complete the congruence statement.
Answer:
the first and second triangle, because their 2 sides are congruent and one of their triangles are congruent.
The first and second triangle, because their 2 sides are congruent and one of their triangles are congruent.
What is Congruent Triangles?
When the three sides and three angles of two triangles are equal in any orientation, they are said to be congruent.
There are three important theorems that link equality and congruence. Two angles are congruent if and only if their measures are equal. Two segments are congruent if and only if their measures are equal. If and only if all corresponding angles and sides are congruent, two triangles are congruent.
If two triangles have the same three sides, they are congruent. The three angles are identical.
So, in the given diagram, The first and second triangle are congruent.
To know more about Congruent Triangles
https://brainly.com/question/2938476
#SPJ2
Help meeeeeeeee plwasee
why is it important to follow the enginering design procces before building a prototype
Answer: So you don’t mess up or do something wrong and if you do something wrong you can update it or revise it and you can communicate with other people to see what you can fix or add
in massive stars fusion of heavier elements continues until it reaches the element ?
Answer:
At this temperature, carbon atoms form heavy elements such as oxygen and nitrogen. The fusion and production of heavy elements continues until iron starts to form. At this point, fusion stops and the iron atoms start to absorb energy. This energy is eventually released in a powerful explosion called a supernova. A supernova can light the sky up for weeks. The temperature in a supernova can reach 1,000,000,000 degrees Celsius. This high temperature can lead to the production of new elements which may appear in the new nebula that results after the supernova explosion. The core of a massive star that is 1.5 to 4 times as massive as our Sun ends up as a neutron star after the supernova.
brilliant answer?
Objectivism is the view that:
Answer:
The view that an action is morally right if one's culture approves of it. People's judgments about right and wrong differ from culture to culture.
Explanation:
Answer:
Objectivists claim that some moral norms are universal. The view that an action is morally right if one's culture approves of it. People's judgments about right and wrong differ from culture to culture.
Explanation:
hope this helps if ur feeling genous mark brainliest
I need help plz the map goes with the answers
ASAP 13 points
What happens along a divergent boundary?
Answer:
Earthquakes and magma
Explanation:
A divergent boundary is when two tectonic plates move away from each other. Earthquakes occur and magma rises from the Earth's mantle.
How does natural increase rate, fertility, and mortality determine population growth and decline?
Answer:
Explanation:
high fertility and high mortality = low nir and low population growth
1. An object has a mass of 37 gram. After it was dropped to a cylinder the water
level rose from 52 mL to 85 mL. What is the density of this object? (Be sure to
include the steps and unit in the answer.) *
Answer: 1.12g/ml
Explanation
Ist step
Volume of the object =final volume of water in the cylinder -Initial volume of water in cylinder
= 85ml -52ml = 33ml
2nd step
Density = Mass/ Volume
37 g/ 33ml =1.12g/ml
3) Find the value of x if B is between A and C. Then find
the length of AC. AB = 2x; BC = x - 1; AC = 5x - 7
What is the relationship between supply and demand?
Answer:
Supply and Demand is typically one of the major factors in determining the pricing of a product or service.
For example, let us take a brand of car for example, Toyota. If Toyota trucks are in high demand, by having a limited amount of trucks, the price per truck would greatly increase. In turn, if Toyota trucks are not selling (low demand), Toyota may choose to replace it, or as the system suggests, lower the price. A lower price may draw prospectors into buying the truck for a "better price".
Typically, the larger the supply, given the quality isn't the worst, and isn't the best, the lower the price, as the demand is fulfilled. The smaller the supply, the greater the price, as there are limited amounts to give too everybody who demands for it. Only those who are able to pay the higher price receives the benefits.
~
An element's atomic mass does not include the mass of its what
Answer:
Electrons
Explanation:
Atomic mass does not include the weight of the atoms electrons. This is because the weight of an electron is so small, even if it was added to the overall mass it would make very little to no difference.