Water is called a ‘universal solvent' because water can dissolve much more substances than any other liquid found in nature but water cannot dissolve every substance.
Is water called universal solvent?Water is referred to as a "universal solvent" because it has a considerably wider range of natural solvent properties than any other liquid. However, water is not capable of dissolving all compounds.
For instance, water cannot dissolve hydroxides, fats, or waxes because oppositely charged particles are not very soluble in water. Hydrogen and oxygen atoms are arranged polarly in water molecules.
The oxygen atom has a negative charge, while the hydrogen atom on one side has a positive charge.The water molecule can more easily attach to various compounds thanks to these charges.
To learn more about universal solvent refer to:
https://brainly.com/question/1834245
#SPJ1
Because it can dissolve a greater variety of chemicals than any other natural liquid, water is referred to as a "universal solvent," though it does not dissolve all substances. The option C is true.
The term "universal solvent" refers to water.In comparison to other liquids, water has a much larger spectrum of natural solvent qualities, earning it the moniker "universal solvent". Nevertheless, not all substances can be dissolved by water.
Because water is not highly soluble in oppositely charged particles, it cannot dissolve hydroxides, fats, or waxes, for example. Water molecules have polar arrangements of the hydrogen and oxygen atoms.
In contrast to the hydrogen atom on one side, which has a positive charge, the oxygen atom has a negative charge.
These charges allow the water molecule to more readily bind to different substances.
For more information about universal solvent kindly visit to brainly.com/question/1834245
#SPJ1
Plz answer fasttt
There are several ways to model a compound. One type of model is shown.
4 C's are connected in a line by 3 black lines. The C on the left has 3 H's attached to it each by a black line. The next C has 1 H attached by a black line and 1 O attached by 2 black lines. The next C has 2 H's attached to it by 1 black line each. The last C has 2 H's attached to it by 1 black line each and 1 O attached by a single black line. That O has an H attached to it by 1 black line.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
I believe the answer would be C4H9O2.
A rocket travels in a straight line at a speed of 5,000 m/s. After 60 seconds, it is 10,000 m/s. What is the rocket's acceleration?
Answer:
From Newtonian Mechanics
Vf=Vo + at
Vf=Final velocity
Vo= Initial Velocity
a= acceleration
t=time taken
Making "a" the subject
a=Vf - Vo/(t)
a = 10,000–5,000/(60)
a=5,000/60
a=83.33ms-²
How is water an exmaple of an molecule and a compound
Answer:
Water is a compound because it is made up of water molecules. There is no such thing as water atoms. Water molecules are made of hydrogen and oxygen atoms, in the definite proportion of two hydrogens for one oxygen.
Explanation:
The difference between a molecule and a compound is this:
A molecule consists of two or more atoms joined by a chemical bond.
A compound consists of two or more different atoms joined by chemical bonds.
Water (H2O) is both a molecule and a compound.
Hydrogen gas (H2) and oxygen gas (O2) are molecules but because the atoms of which they are made are not different, they do not qualify as compounds.
PLEASE HELPPPP!!!!!!
nitric acid, hno3, is classified as a strong acid in water. this means that it produces
nitric acid (HNO3) is classified as a strong acid in water, which means that it dissociates completely in water to produce hydrogen ions (H+) and nitrate ions (NO3-).
This is in contrast to weak acids, which only partially dissociate in water. Strong acids have a very low pH (typically less than 1) and are highly corrosive, making them useful for many industrial applications such as making fertilizers, explosives, and dyes. However, they can also be dangerous and must be handled with care. A strong acid is an acid that fully dissociates or ionizes in water, meaning it releases all of its hydrogen ions (H+) into solution. This makes the acid highly acidic and gives it a low pH (typically less than 1). Some examples of strong acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), nitric acid (HNO3), and perchloric acid (HClO4). Strong acids are highly reactive and can cause chemical burns and other damage if not handled properly. \
Learn more about strong acid here:
https://brainly.com/question/12811944
#SPJ4
The decrease in entropy (the DS value is negative) observed for alkene addition reactions results from:
Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.
The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.
To learn more about carbocation please click on below link
https://brainly.com/question/13164680
#SPJ4
how to balanced this one
_KClO4 + _KCl ➡️ _KClO3
& this one too. Ill give brainliest
_AlI3 + _HgCl2 ➡️ AlCl3 + _HgI2
Answer:
3KClO4 + KCl ➡️ 4KClO3
2AlI3 + 3HgCl2 ➡️ 2AlCl3 + 3HgI2
A student heated 30 milliliters of water from 0 degrees celcius to 70 degrees celcius. How much energy did she use to heat the water?
The amount of energy used to heat the water from 0°C to 70°C is 8,786.4J.
How to calculate energy?The amount of energy used in heating a substance can be calculated using the following formula:
Q = mc∆T
Where;
Q = amount of heat absorbed or releasedm = mass of substance in gramsc = specific heat of water at 4.184 J/g°C∆T = change in temperatureAccording to this question, a student heated 30 milliliters of water from 0 degrees celsius to 70 degrees celsius.
Since 1mL of pure water equals 1 gram, then 30mL of water will equal 30grams of water.
Q = 30 × 4.184 × (70 - 0)
Q = 8,786.4J
Therefore, 8,786.4J is the energy used to heat the water sample.
Learn more about energy at: https://brainly.com/question/8168263
#SPJ1
Why is energy released when intermolecular bonds form?
Answer:
Forming bonds requires energy
Explanation:
Creating a bond is bringing 2+ atoms into a more stable position.
The quantity of matter in a body,object,or substance.Mass is measured in the metric system in units if grams kilograms ,milligrams,etc is it A. Work or B.Mass?
The quantity of matter in a body,object,or substance is B. Mass.
What is Mass?A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely believed to be related to the amount of matter in a physical body.
It is the most fundamental characteristic of matter and one of the fundamental quantities in physics. Mass is a term used to describe how much matter is present in a body. The kilogram is the SI unit of mass (kg). A body's mass does not alter at any point in time.
Learn more about mass on:
https://brainly.com/question/837939
#SPJ1
People often think bonds store or hold energy. If that is true, should the energy be high or low when a bond forms?
(HELP PLEASE)
Answer:
The energy should be high.
Explanation:
Bonds do store energy and release it depending if it's endothermic or exothermic. The energy should be low because when a bond forms (endothermic) it releases heat, which helps form bonds. Having a high energy means the bond is absorbing energy, which helps break bonds (endothermic). How this helps!
what is the volume of 35.2g of copper when copper is 8.80 g/cm3 and the density is at 20°C?
The volume of the copper is equal to 4cm³.
What is the density?The density of the substance can be described as the substance's mass per unit of its volume. The symbol commonly used to express density is ρ and the D letter can also be used.
The mathematical formula of the density can be expressed as written below:
Density = Mass/Volume or ρ = m/V
The density of a material varies with temperature and pressure. There is a small variation for solids as well as liquids but much larger for gases. Increasing the pressure of material decreases the volume of material and thus increases its density.
Given the mass of the copper = 35.2 g
The density of the copper at 20°C, d = 8.80 g/cm³
The volume of the copper, V = mass/density = 35.2/8.80 = 4 cm³
Learn more about density, here:
brainly.com/question/15164682
#SPJ1
The pressure acting here is 3.32 atm. Then the volume of copper can be determined using ideal gas law. The volume is 3.9 L.
What is ideal gas equation ?Ideal gas equation is a combination of Boyle's law, Charle's law and Avogadro's law. The expression relating pressure, volume, temperature and number of moles of a gas is written as:
PV = nRT.
It can be rearranged as PM = dRT.
where d is the density and M be the mass.
Atomic mass of copper = 63.5 g/mol
density = 8.80 g/cm³
T = 20° C or 293 K.
Then pressure p = dRT/M
p = 8.80 g/cm³ × 0.082× 293 /63.5 = 3.32 atm
Now the weight of copper = 35.2 g
number of moles of Cu = 35.2/63.5 = 0.5 g.
Then, v = nRT/P
v = 0.5 × 0.082 × 293 /3.32 = 3.9 cm³.
Therefore, the volume of copper is 3.9 L.
Find more on ideal gas equation:
https://brainly.com/question/17254541
#SPJ1
What is an atom?
A An atom is a round spherical object found inside most objects made of
matter
B. An atom is a round spherical object found inside objects made of matter
C. An atom is a basic building block of matter.
D. An atom is a subunit of longer extended structures.
Explanation:
what is an atom?
An atom is a basic building block of matter.
What is the half-life of a 12 g sample of radioisotope that decayed to 6 g in 28
years?
A. 28 years
B. 14 years
C. 56 years
D. 7 years
Answer:
A. 28 years
Explanation:
Applying,
R = R'(2ᵃ/ⁿ).............. Equation 1
Where R = Original sample, R' = Sample left after decay, a = Total time taken to decay, n = half life.
From the question,
Given: R = 12 g, R' = 6 g, a = 28 years.
Substitute into equation 1 and solve for n
12 = 6(2²⁸/ⁿ)
12/6 = 2²⁸/ⁿ
2²⁸/ⁿ = 2
Equation the base,
28/n = 1
n = 28 years.
Hence the half-life is 28 years
Analysis of a compound formed between magnesium and nitrogen showed it contained 14.4g of magnesium and 5.6.g of nitrogen.
What is the empirical formula of the compound?
A Mg2N3
B Mg3N2
CMg4N6
D Mg6N4
And why is it that way?
Answer:
B. Mg3N2
Explanation:
There are 20.0 grams total material (14.4g Mg and 5.6 g N). We can convert grams into moles of each element by dividing by that element's molar mass (g/mole) to yield the number of moles of each element. To find the empirical formula, we need to convert the moles of each to a whole number by using a fracor that provides a whole number for each element. 5 works well, and we get 0.6x5 = 3 Mg atoms and 0.4x5 = 2 N atoms.
Mass % g/mole grams moles Factor of 5
Mg 72.00% 24.305 14.4 0.6 2.962 or 3
N 28.00% 14.007 5.6 0.4 1.999 or 2
100.0% 20 1.0
There are 3 Mg and 2 N atoms per molecule. The empirical formula is Mg3N2.
Select the correct answer.
An iron nail is made up of particles. What is true about the particles?
A.They move all over the place.
B.The force of attraction between them is small.
C.The spacing between them
is large.
D. They stay in place and vibrate.
What is true about the particles?
D. They stay in place and vibrate.
what are the moon phases. but be more detailed and don't put in "the phases of the moon" be more detailed.
Explanation:
The lunar phase or Moon phase is the shape of the Moon's directly sunlit portion as viewed from Earth. The lunar phases gradually change over a synodic month as the Moon's orbital positions around Earth and Earth around the Sun shift.
Explain the energy flowing as you hold an ice cream cone. (Be sure to mention "the system," "the surroundings," and how energy is being transferred.)
Answer:
This is what I put, it hasn't been graded though...
Within the system, the energy is flowing from your hand to the ice cream cone. Energy is also flowing from the surroundings to the ice cream cone unless it's reeeeaally cold in the surroundings in which case why are you even holding an ice cream cone when it's that cold?
What happens to the pressure inside a rigid container if the
amount of gas inside is doubled?
a It doubles.
b It is reduced by half.
clt quadruples.
d It stays the same.
Answer: A. It doubles
Explanation:
Are used for energy storage to build structures and as signal molecules to help cells communicate with each other
Yes, carbohydrates are used for energy storage to build structures, and as signal molecules to help cells communicate with each other.
Carbohydrates and functionsCarbohydrates are molecules that consist of carbon, hydrogen, and oxygen atoms and can be broken down by the body to provide energy. They are used to build the structural components of cells, such as the cell walls and membranes, and are also used as signal molecules between cells. As signal molecules, they can help cells communicate with each other and respond to changes in the environment.
Learn more about Carbohydrates: https://brainly.com/question/797978
#SPJ4
At what point in time (A ,B or C) is the reaction the fastest? How do you know?
A
B
С
In a car engine, energy in the fuel ___ energy tore i tranferred to ueful kinetic energy tore
In a car engine, energy in the fuel's chemical energy stores is transferred to useful kinetic energy stores.
Explanation:
Chemical energy is the form of energy held within the fuel. A car's engine operates by burning fuel. The fuel is burned, creating mechanical energy that moves the vehicle. The engine thus transforms chemical energy into mechanical energy.
What are the Energy Conversions of a car?By applying pressure to the pistons and exerting work on them, the internal combustion engine of a car transforms the potential chemical energy in gasoline and oxygen into thermal energy, which is then translated into mechanical energy that drives the vehicle (raising its kinetic energy).
To learn more about fuel's chemical energy visit;
https://brainly.com/question/11867037
#SPJ4
reasons why large quantities of electricity is used for down's cell
1.High energy demands: Down's cells require a large amount of energy to function effectively. The process of creating and maintaining the cells requires significant energy inputs to power equipment, lighting, heating, and cooling systems.
2.Manufacturing processes: Many of the processes involved in creating and maintaining Down's cells are energy-intensive. This includes cell replication, gene manipulation, and tissue culture.
3.Complex equipment: The equipment required for Down's cell research and production is often complex and requires significant energy inputs to operate. This includes centrifuges, microscopes, and other specialized equipment used in the lab.
4.Climate control: Down's cells must be kept at specific temperatures and humidity levels to maintain their integrity. This requires the use of energy-intensive climate control systems to maintain optimal conditions.
5.Data storage and processing: With the growing amount of data generated by Down's cell research, large quantities of electricity are also needed to store and process the data.
6.Extensive research and development: Down's cells are a relatively new area of research, which means that large amounts of electricity are used to power experimentation and the testing of new techniques and methods.
To learn more about electricity:-
https://brainly.com/question/776932
The following data was collected when a reaction was performed experimentally in the laboratory.
Reaction Data:
Reactants:
Fe2O3 (3 moles)
Al (5 moles)
Products:
Al2O3 (?)
Fe (?)
Determine the maximum amount of Fe that was produced during the experiment. Explain how you determined this amount.
Please be thorough. I am in agony at this question and I need the most help I can get. Thanks
According to the data collected during the experimental reaction in the laboratory, and the balanced equation of the reaction, 5 moles of iron (Fe) and 2.5 moles of aluminum oxide (Fe2O3) were produced.
Determination of the maximum amount of Fe that was produced during the experiment.Balanced equation of the reactionFe2O3 + 2Al → 2Fe + Al2O3
Limit reagent determinationIf 1 mole of Fe2O3 is combined with 2 moles of Al
So 3 moles of Fe2O3 combine with x moles of Al
X moles of Al = 3 moles Fe2O3 x 2 moles Al / 1 mole Fe2O3 = 6 moles
Limiting reagent: Al, because there are only 5 moles available
Determination of the amount of iron producedIf 2 moles of Al produce 2 moles of Fe
So 5 moles of Al produce x moles of Fe
X moles of Fe = 5 moles of Al x 2 moles of Fe / 2 moles of Al = 5 moles
Determination of the amount of aluminum oxide producedIf 2 moles of Al produce 1 mole of Fe2O3
So 5 moles of Al produce x moles of Fe2O3
X moles of Fe = 5 moles of Al x 1 mole of Fe2O3 / 2 moles of Al = 2.5 moles
Explanation about the procedures used to determine the amount of ironBy establishing the balanced equation of the reaction and the stoichiometric relationships, the amount of limit reagent is first determined and with this data, the moles of products are later determined.
Learn more about data was collected when a reaction was performed experimentally in the laboratory at https://brainly.com/question/29100434
#SPJ4
thoughts? this is for chem grade 11
Answer:
Pb(s)------>Pb2+(aq)
Explanation:
If you look at the oxidation numbers Pb increases from 0 to +2 while Cu decreases from +2 to 0.Hence,Pb is the reducing agent and Cu2+ is the oxidizing agent.
Also, a thing to note is that the oxidation number of any solid is always 0.
~Hope this helps:)
On which of the following factors does the amount of energy absorbed by an endothermic reaction depend?
O Number of reactants
O Physical state of the reactant
O Sum of the potential energy of the reactants and products
O Difference in the potential energy of the reactants and products
Answer: D!! ( difference in the potential energy of the reactants and products )
Explanation:
i have the same test
Base your answer on the information below. in liquid water, an equilibrium exists between h2o() molecules, h+(aq) ions, and oh–(aq) ions. a person experiencing acid indigestion after drinking tomato juice can ingest milk of magnesia to reduce the acidity of the stomach contents. tomato juice has a ph value of 4. milk of magnesia, a mixture of magnesium hydroxide and water, has a ph value of 10. identify the negative ion found in milk of magnesia.
Answer:
OH^-
Explanation:
Any substance that is able to neutralize acidity in the stomach is generally known as an antacid. There are various kinds of antacids that are in common use. It should be noted that the stomach is usually slightly acidic.
Milk of magnesia is the substance magnesium hydroxide with chemical formula Mg(OH)2. A solution of milk of magnesia contains Mg^2+ and OH^-.
Hence the negative ion contained in milk of magnesia is the hydroxide ion OH^-.
PLEASE HELP 100 POINTS FOR THIS
A student placed a piece of nickel in silver nitrate solution. Silver metal precipitated and
aqueous nickel (II) nitrate was produced. The student collected the following data:
Mass of beaker 102. 05 g
Mass of beaker with silver 103. 13 g
Mass of nickel before 5. 00 g
Mass of nickel after 4. 69 g
__ Ni + __ AgNO 3 à __ Ag + __ Ni(NO 3 ) 2
Determine the percent yield of silver
Answer:
Explanation:
Mass the fluid, find its volume, and divide mass by volume. To mass the fluid, weigh it in a container, pour it out, weigh the empty container, and subtract the mass of the empty container from the full container. To find the volume of the fluid, you simply measure it very carefully in a graduated cylinder.
The heat of combustion of CH4 is 890. 4 kJ/mol and the heat capacity of H2O is 75. 2 J/mol×K.
Part A
Find the volume of methane measured at 298 K and 1. 45 atm required to convert 1. 50 L of water at 298 K to water vapor at 373 K
The volume of methane is 69.15L.
Heat (Q) of methane =Heat(Q) of water
Q = mcΔt
water mass = volume(V) × pressure(P)
1L×1kg/L=1kg
298 K to 373k = 25°C to 100 °C
c water = 75.2J/mol K =4.2 J/g °C = 4200 J/kg °C
Heat of water (Q) = 1×4200 (100 -25)
Heat of water (Q) = 315000J
∴ Heat of methane = Heat of water = 315000 J
= 315 KJ
n (mol) methane = ΔH/Q
890.4/315 = 2.83
According to the ideal gas law,
PV = nRT
Where;
P = Pressure
V = Volume
n = amount of substance
R = ideal gas constant
T = temperature
Now,
V = nRT/P
V = 2.83 × 0.082 ×298/1
V = 0.23206 ×298/1
V = 69.15L
To know more about Volume, click here:
brainly.com/question/1578538
#SPJ4
which of the following would not be an action-reaction pair according to newton's third law of motion? a. an oar pushes the water, and the water pushes the oar. b. a dog wags its tail, and the tail wags the dog. c. a missile pushes a gas, and the gas pushes the missile. d. a boy sits in a chair, and the floor pushes the boy.
"A boy sits in a chair and the floor pushes the boy" is not an action-reaction pair according to Newton's third law of motion.
According to Newton's third law of motion, every action which occurs in nature has an equal as well as opposite reaction. If a particular object Z happens to exert a force on another object Y then the object Y will also exert an equal as well as opposite force on object Z.
For example, when an oar pushes the water, the water also pushes the oar; when a dog wags its tail, the tail also wags the dog and when a missile pushes gas out, the gas also pushes the missile forward. All these instances involve an action-reaction pair.
Hence, option d. "a boy sits in a chair, and the floor pushes the boy" is the correct option.
To know more about Newton's third law of motion here
https://brainly.com/question/29768600
#SPJ4