4. How many molecules are in the following formula?
3Fe2O3

Answer:

4.44 moles

Explanation:

first u have to change the units into dm cube.

cm cube÷1000=dm cube

185cmcube÷1000= 0.185dm cube

24dm cube= 1 mole(formula)

0.185dm cube × 24dm cube=4.44 moles

Answer:

Ni2+ is reduced at the cathode.

The anode reaction could be Cr -> Cr3+ + 3e-

As the cell runs, anions will migrate from the Ni2+|Ni compartment to the other compartment.

Explanation:

As we know, in a galvanic cell, oxidation occurs at the anode and reduction occurs at the cathode. Hence at the cathode, nickel is reduced as follows;

Ni^2+(aq) + 2e ----> Ni(s)

Considering the reduction potential of the Ni2+ | Ni half cell (-0.25 V) and that of the Cr3+/Cr half cell (-0.74 V), the later has a more negative reduction potential and will most likely serve as the anode of the galvanic cell.

Lastly, the reduction of Ni^2+ leads to a build up of anions in the cathode compartment. To maintain neutrality in the cell, some anions migrate to the other compartment.

Answer:

B. Chlorine gas is yellow-green in color.

Answer:

neutrons = 20

Explanation:

No. of Neutrons = Mass No. - Atomic No

= 39 - 19

=20

Answer:

1) What is the element? Potassium

2) how many neutrons does it have? 20

3) If it is a neutral atom how many electrons does it have?​ 39

Please mark as brainliest if answer is right

Have a great day, be safe and healthy  

Thank u  

XD  

Answer:

Capacity is the amount of liquid a container can hold. Mass is how much space an object takes up.

Explanation:

All the others are incorrect.

Answer:

A. one potassium and one iodine

Explanation:

K is a metal and I is a nonmetal, so K will lose electrons to form a cation and I will gain electrons to form an anion. Together, they will be bonded through an ionic bond. To determine how many electrons they gain or lose and how many atoms are in the chemical formula, we need to consider the octet's rule: an atom will gain, lose, or share electrons until it has 8 electrons in its valence shell.

We need 1 K⁺ and 1 I⁻ to form the neutral salt KI.

Answer:

Electrolysis is the passing of a direct electric current through an electrolyte producing chemical reactions at the electrodes and decomposition of the materials. The main components required to achieve electrolysis are an electrolyte, electrodes, and an external power source.

Explanation:

Answer:

In chemistry and manufacturing, electrolysis is a technique that uses direct electric current to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell.

hope it helps uh....

I am new here...

thanks ^^

Answer:

yes

Magnesium (Mg) combines with chlorine (Cl2) to form a new product as magnesium chloride (MgCl2). Therfore its a combination reaction and the balanced equation can be written as: Mg(s)+Cl2(g)→MgCl2(s)

Answer:

B. 28.1 amu

Explanation:

Answer:  Blue whales, like humans, obtain molecules from food and air through a process of digestion and respiration. During digestion, molecules in food are broken down and absorbed into the bloodstream, while during respiration, oxygen molecules in the air are absorbed into the bloodstream. Both processes enable blue whales to obtain the necessary molecules for energy, growth, and development.

Answer:

See explanation.

Explanation:

Hello there!

In this case, considering the given information, it is not possible to figure out such order of reaction with respect to water as it is not involved in the given chemical reaction:

2E(g)+ F(g)+O(g)_

However, we can say that the order of reaction is 2 with respect to E (power of 2 in the rate law), 1 with respect to F (power of 1 in the rate law) and 0 with respect to O (power of 0 or not present in the rate law).

Regards!

Answer:

Get a controlled environment, such as a pool or even a bowl. Pour some oil in it then you can test your solutions without causing any damage.

Explanation:

Natural radioactive elements are those that spontaneously radiate in nature and have an atomic number between 82 and 92. In dirt, air, water, rocks, plants, food, uranium—a radioactive element—can be discovered.

When an element's atoms contain excess neutrons or protons, the extra energy produced in the nucleus causes the atom to lose its equilibrium or become unstable. if and how radioactive particles can become stable. Radiation is produced by radioactive atoms' unstable nuclei.

Compared to beta and gamma particles, alpha particles represent the most dangerous internal threat. The most hazardous methods of exposure to radioactive elements that release alpha and beta radiation are ingestion, inhalation, absorption, and injection. Gamma radiation is the outside hazard that causes the most damage.

To know more about radioactive elements visit:

https://brainly.com/question/17551878

#SPJ1

Answer:

0.0710

Explanation:

Basedon the data provided, the concentration of the standardized titrant is 0.142 M.

A standard solution is a solution of known concentration.

The concentration of the standardized titrant is calculated from the mole of KHP required.

Moles of KHP = 0.7625 g/ 204.22 g/mol

Moles of KHP = 0.00373 mol

Mole ratio of KHP and NaOH is determined from the equation of the reaction below:

Therefore, moles of NaOH = 0.00373 moles

Molarity of a NaOH = moles/volume in L

volume of titrant = 26.32 mL = 0.02632 L

Molarity of NaOH = 0.00373/0.02632

Molarity of NaOH = 0.142 M

Therefore, the concentration of the standardized titrant is 0.142 M.

Learn more about standard solution at: https://brainly.com/question/24549357

Answer:

Step 1: Use the kn*fe to cut the rubber tubing into two pieces.

Step 2: Use one plastic bag to filter the pond's murky water. Place the bag over the plastic cup and pour the water into it.

Step 3: Place the filtered water from the plastic bag into the 5-L glass bottle.

Step 4: Add a few drops of the liquid bleach to the water in the glass bottle.

Step 5: Place the nylon jacket over the top of the glass bottle and secure it with the rubber tubing.

Step 6: Place the glass bottle in direct sunlight and let it sit for at least an hour.

Step 7: Remove the nylon jacket and rubber tubing from the glass bottle.

Step 8: Use the second plastic bag to filter the water from the glass bottle.

Step 9: Enjoy the drinkable water!

Explanation:

Because of their different longitude.

By applying Boyle's law, the new volume of this gas is equal to: D. 4.0 L.

Given the following data:

Initial volume = 3.0 L.

New pressure = 1.5 atm.

Initial pressure = 2.0 atm.

In order to calculate the new volume of this gas, we would apply Boyle's law. Mathematically, Boyle's law is given by this formula:

PV = k

P₁V₁ = P₂V₂

Where:

Making V₂ the subject of formula, we have:

V₂ = (P₁V₁)/P₂

Substituting the given parameters into the formula, we have;

V₂ = (2.0 × 3.0)/1.5

V₂ = 6.0/1.5

V₂ = 4.0 L.

Read more on Boyle's law here: https://brainly.com/question/469270

#SPJ1

Answer:

D. 4.0 Liters

Explanation:

I took the exam

Answer: the substance is from an animal source

Explanation:

Mass can be calculated by using moles which can be further calculated from multiplication of Molarity to volume. Therefore, the molarity of the HCl solution is 3M. the correct option is option C.

Molarity can be calculated by dividing  number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/litre. It measure the concentration of any solute in a solution.

Other concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution

Mathematically,

2HCl + Ca(OH)[tex]_2[/tex] [tex]\rightarrow[/tex] CaCl[tex]_2[/tex] + 2H[tex]_2[/tex]O

Molarity of HCL× Volume of HCL=Molarity of Ca(OH)[tex]_2[/tex] ×Volume of  Ca(OH)[tex]_2[/tex]

Molarity of HCL× 1.00 L=1.50 M× 2.00 L

Molarity =3M

Therefore, the molarity of the HCl solution is 3M. the correct option is option C.

Learn more about the molarity, here:

https://brainly.com/question/16727614

#SPJ2

The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.025  is the number of moles of K+ ions are present in 250 mL of a 0.4M KCl solution.

Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.

Mathematically,

Molarity= number of moles of solute/volume of solution in litre

Substituting values in equation 1

0.4M=number of moles of solute/0.25

number of moles of solute=0.025moles

Therefore, 0.025  is the number of moles of K+ ions are present in 250 mL of a 0.4M KCl solution.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ1

Answer:

Explanation:

Dear student, there is no sufficient information to calculate the empirical formula but we will explain what Empirical Formula is all about.

An empirical formula is made up of symbols that denote the elements in a complex, such as H for hydrogen and O for oxygen, as well as subscripts that indicate the number of atoms from each constituent element.

The empirical formula is the atoms in a complex with the lowest whole number ratio. The precise number of atoms in a single molecule is not necessarily shown.

Answer:

Option B. 384 nm

Explanation:

From the question given above, the following data were obtained:

Frequency (f) = 7.81×10¹⁴ Hz

Velocity of photon (v) = 3×10⁸ m/s

Wavelength (λ) =?

The wavelength of the photon can be obtained as follow:

v = λf

3×10⁸ = λ × 7.81×10¹⁴

Divide both side by 7.81×10¹⁴

λ = 3×10⁸ / 7.81×10¹⁴

λ = 3.84×10¯⁷ m

Finally, we shall convert 3.84×10¯⁷ M to nm. This can be obtained as follow:

1×10¯⁹ m = 1 nm

Therefore,

3.84×10¯⁷ m = 3.84×10¯⁷ m × 1 nm / 1×10¯⁹ m

3.84×10¯⁷ m = 384 nm

Thus, the wavelength of the photon is 384 nm

Answer:

b. 3.66x10²³ atoms of chromium.

Explanation:

First we calculate how many moles are there in 31 grams of chromium, using its molar mass:

Then we calculate how many atoms are there in 0.608 moles, using Avogadro's number:

The correct answer is thus option b. 3.66x10²³ atoms of chromium.

8 acidic oxides, take your pick <3

Aluminium oxide.

Silicon dioxide.

Phosphorus oxides.

Sulfur oxides.

Chlorine oxides.

Iron oxides.

Chromium oxides.

Vanadium oxides

Answer:

3.25×10²⁴ molecules

Explanation:

From the question given above, the following data were obtained:

Mass of H₂O = 97.2 g

Number of molecule of H₂O =?

From Avogadro's hypothesis, we understood that:

1 mole of H₂O = 6.02×10²³ molecules

Next, we shall determine the mass of 1 mole of H₂O. This can be obtained as follow:

1 mole of H₂O = (2×1) + 16

= 2 + 16

= 18 g

Thus,

18 g of H₂O = 6.02×10²³ molecules

Finally, we shall determine the number of molecules in 97.2 g of H₂O. This can be obtained as follow:

18 g of H₂O = 6.02×10²³ molecules

Therefore,

97.2 g of H₂O = 97.2 × 6.02×10²³ / 18

97.2 g of H₂O = 3.25×10²⁴ molecules

Thus, 97.2 g of H₂O contains 3.25×10²⁴ molecules.

Answer: The answer is Conduction

Answer:

Conduction

Explanation:

Conduction happens when materials or objects are in direct contact with each other. The molecules in the warmer object vibrate faster than the ones in the cooler object.

Answer:

Why do chemists use the mole as a counting unit? Because chemical reactions often involve large numbers of small particles, chemists use a counting unit called the mole to measure amounts of a substance. ... The discovery enabled scientists to classify certain chemical reactions as transfers of electrons between atoms.Explanation:

Chemical reactions often involve large numbers of small particles, chemists use a counting unit called the mole to measure amounts of a substance.

It is not possible to vell with a single atom or molecule because we

can't count them.

Chemists have set a number of particles with which to toil that is convenient. As molecules are very small.

Thus,  chemists use a counting unit called the mole to measure the amounts of a substance.

To learn more about Chemical reactions click here:

https://brainly.com/question/22817140

Answer:

1. The final temperature of the metal is 111 °C.

2. The change in the temperature of the water is 6.2 °C

3. The change in the temperature of the metal is 40.6 °C.

Explanation:

From the question given above, the following data were obtained:

Initial temperature of metal (Tₘ₁) = 70.4 °C

Initial temperature of water (Tᵥᵥ₁) = 23.6 °C

Equilibrium temperature (Tₑ) = 29.8 °C

1. Determination of the final temperature of metal.

We'll begin by calculating the change in temperature of the metal. This can be obtained as follow:

Initial temperature of metal (Tₘ₁) = 70.4 °C

Equilibrium temperature (Tₑ) = 29.8 °C

Change in temperature of metal (ΔTₘ) =?

ΔTₘ = Tₘ₁ – Tₑ

ΔTₘ = 70.4 – 29.8

ΔTₘ = 40.6 °C

Finally, we shall determine the final temperature of the metal. This can be obtained as follow:

Initial temperature of metal (Tₘ₁) = 70.4 °C

Change in temperature of water (ΔTₘ) = 40.6 °C

Final temperature of metal (Tₘ₂) =?

40.6 = Tₘ₂ – 70.4

Collect like terms

40.6 + 70.4 = Tₘ₂

111 = Tₘ₂

Tₘ₂ = 111 °C

Thus, the final temperature of the metal is 111 °C

2. Determination of the change in the temperature of the water.

Initial temperature of water (Tᵥᵥ₁) = 23.6 °C

Equilibrium temperature (Tₑ) = 29.8 °C

Change in temperature of water (ΔTᵥᵥ) =?

ΔTᵥᵥ = Tₑ – Tᵥᵥ₁

ΔTᵥᵥ = 29.8 – 23.6

ΔTᵥᵥ = 6.2 °C

Therefore, the change in the temperature of the water is 6.2 °C

3. Determination of the change in the temperature of the metal.

The change in the temperature of the metal is 40.6 °C.

Please solution 1 above for explanation.

Answer:

29.8 C

6.2 C

-40.6 C

:)

Explanation:

Sublevels are indicated by letters s, p, d, and f.

How do write Electronic configuration?

Electron configurations have a standard notation that tells you the principle energy levels and sublevels that electrons occupy. here is Sulphur:

The atomic number of Sulphur is 16.

the electronic configuration of Sulphur is 1s2 2s2 2p6 3s2 3p4.

The 4s sublevel has lower energy than the 3d sublevel,

so, it fills next.

One orbital can house a maximum of two electrons, and there are four different types of orbitals (s, p, d, and f). More electrons can be held in the p, d, and f orbitals since they contain various sublevels. According to its location on the periodic table, each element's electron configuration is distinct.

To know more electron confirguration here:

brainly.com/question/18566828

#SPJ1