Computers And Technology College

8.6 Code Practice: Question 1 Python
Write a function named "buildList" that builds a list by appending a given number of random integers from 100 to 199 inclusive. It should accept two parameters — the first parameter is the list, and the second is an integer for how many random values to add, which should be input by the user.
Print the list after calling "buildList". Sort the list and then print it again.

Sample Run
How many values to add to the list:
10
[141, 119, 122, 198, 187, 120, 134, 193, 112, 146]
[112, 119, 120, 122, 134, 141, 146, 187, 193, 198]

Answers

Answer 1

Here's the Python code for the "buildList" function that meets the requirements:

The Python Code

import random

def buildList(lst, num):

for i in range(num):

lst.append(random.randint(100, 199))

lst = []

num = int(input("How many values to add to the list:\n"))

buildList(lst, num)

print(lst)

lst.sort()

print(lst)

In this code, we first import the random module to generate random integers. The buildList function takes two parameters, lst which is the list to which the random integers will be appended and num which is the number of random integers to generate and append to the list.

The buildList function uses a for loop to iterate num times, and in each iteration, generates a random integer between 100 and 199 (inclusive) using the random.randint function and appends it to the list.

We then call the buildList function with the input values for lst and num provided by the user. We print the list using the print function, then sort the list using the sort method and print it again.

Related Questions

Help ?i need help please

Answers

set a featured image or add a playlist

Design a program that prompts the user to enter a number within the range of 1 through 10. The program should display the Roman numeral version of that number. If the number is outside the range of 1 through 10, the program should display an error message.write a pseudocode and draw a flow chart using the right diagrams and shapes

Answers

Answer:

Pseudocode:

Prompt the user to enter a number between 1 and 10

Read the input from the user

If the input is between 1 and 10, continue to step 4. Otherwise, display an error message and end the program.

Create an array of roman numerals I, II, III, IV, V, VI, VII, VIII, IX, X

Subtract 1 from the input number and use it as an index to retrieve the corresponding roman numeral from the array

Display the roman numeral to the user

End the program

Flowchart:

[Start] --> [Prompt user to enter a number] --> [Read input]

--> {input between 1 and 10?}

--> [Create array of roman numerals]

--> [Subtract 1 from input and use as index to retrieve corresponding roman numeral]

--> [Display roman numeral to user] --> [End]

--> [Display error message and end] --> [End]

Explanation:

Outbound network traffic should be subjected to the same investigations and analysis as inbound network traffic.

True or False?

Answers

Answer:

True

Firewalls block most things coming in, but outbound traffic is less restricted. If a device on the network is accessed with a reverse shell, attackers outside the network have unrestricted access to within.

4.When information is entered into a computer, what happens?

Answers

An information becomes a Data after input into a computer. Data is any collection of numbers, alphabets or other symbols that have been coded into a format which can be input into a computer and processed. The sets of instructions that humans give computers are called software or program.

After being entered into a computer, information becomes data.

What is Information?

Data is any collection of figures, letters, or other symbols that have been encoded in a way that allows them to be entered into and processed by a computer. Software or programs are the directives that people send to computers.

Information is a general term for everything with the capacity to inform. Information is most fundamentally concerned with the interpretation of what may be sensed. Each non-completely random natural process and any discernible pattern in any media can be said to communicate some level of information.

Other occurrences and artifacts, such as analogue signals, poems, photographs, music or other sounds, and currents, convey information in a more continuous manner as opposed to digital signals and other data, which employ discrete signs to do so.

Therefore, After being entered into a computer, information becomes data.

To learn more about Computer, refer to the link:

https://brainly.com/question/13805692

#SPJ2

How would QuickBooks Online alert you of a discrepancy in the beginning balance when reconciling your clients’ accounts?

Answers

An alert would have to be made by QuickBooks Online of the discrepancy that is occuring.

How does Quickbook alert work?

QuickBooks alerts are a feature within the QuickBooks accounting software that allows users to set up notifications for various events or situations that require attention. These alerts can be sent via email or within the QuickBooks software itself.

To set up a QuickBooks alert, follow these steps:

Open QuickBooks and navigate to the "Edit" menu.

Click on "Preferences" and select "Reminders" from the left-hand menu.

Check the box next to the type of alert you wish to receive (e.g. overdue invoices, upcoming bills, low inventory).

Answers

Note that an example Java program that calculates the data required is given as follows.

import java.util.Scanner;

public class PaintingCompany {

public static void main(String[] args) {

Scanner input = new Scanner(System.in);

// Prompt the user for the wall space and paint price

System.out.print("Enter the wall space in square feet: ");

double wallSpace = input.nextDouble();

System.out.print("Enter the price of paint per gallon: ");

double paintPrice = input.nextDouble();

// Calculate the data required

double gallonsOfPaint = calcGallonsOfPaint(wallSpace);

double costOfPaint = calcCostOfPaint(gallonsOfPaint, paintPrice);

double hoursOfLabor = calcHoursOfLabor(wallSpace);

double laborCharges = calcLaborCharges(hoursOfLabor);

double totalCost = calcTotalCost(costOfPaint, laborCharges);

// Display the results

System.out.println("Gallons of paint required: " + gallonsOfPaint);

System.out.println("Cost of paint: $" + costOfPaint);

System.out.println("Hours of labor required: " + hoursOfLabor);

System.out.println("Labor charges: $" + laborCharges);

System.out.println("Total cost of the paint job: $" + totalCost);

}

// Method to calculate the number of gallons of paint required

public static double calcGallonsOfPaint(double wallSpace) {

return Math.ceil(wallSpace / 115);

}

// Method to calculate the cost of the paint

public static double calcCostOfPaint(double gallonsOfPaint, double paintPrice) {

return gallonsOfPaint * paintPrice;

}

// Method to calculate the hours of labor required

public static double calcHoursOfLabor(double wallSpace) {

return Math.ceil(wallSpace / 115) * 8;

}

// Method to calculate the labor charges

public static double calcLaborCharges(double hoursOfLabor) {

return hoursOfLabor * 18.0;

}

// Method to calculate the total cost of the paint job

public static double calcTotalCost(double costOfPaint, double laborCharges) {

return costOfPaint + laborCharges;

}

What is the explanation for the above response?

This program uses five methods to calculate the required data based on the user input. The main method prompts the user for the wall space and paint price, calculates the required data using the other methods, and displays the results on the screen.

Each of the other methods performs a specific calculation and returns the result. The calcGallonsOfPaint method calculates the number of gallons of paint required, the calcCostOfPaint method calculates the cost of the paint, the calcHoursOfLabor method calculates the hours of labor required, the calcLaborCharges method calculates the labor charges, and the calcTotalCost method calculates the total cost of the paint job.

Learn more about Java program at:

https://brainly.com/question/2266606

#SPJ1

In this lab, you assign variables in a Python program. The program, which is saved in a file named NewAge.py, calculates your age in the year 2050.

# This program calculates your age in the year 2050.
# Input: None
# Output: Your current age followed by your age in 2050

# Create your variables here

myNewAge = myCurrentAge + (2050 - currentYear)
print("My Current Age is " + str(myCurrentAge))
print("I will be " + str(myNewAge) + " in 2050.")

Answers

This Python program calculates a person's age in the year 2050.

What is the explanation for the above response?

The program assigns a variable myCurrentAge to the person's current age and calculates the person's age in the year 2050 by adding the difference between 2050 and the current year to their current age. The resulting age in 2050 is stored in a variable myNewAge.

The program then prints the person's current age and their age in 2050 using the print() function, converting the variables to strings using the str() function and concatenating them with the relevant text strings.

Learn more about Python at:

https://brainly.com/question/31055701

#SPJ1

What is the purpose of the Input Message feature? to alert the user to data entry mistakes to immediately correct data entry mistakes to inform a user that data validation has been established to send message to data entry with what mistakes have been found

Answer is c

Answers

The purpose of the Input Message feature is to inform the user that data validation has been established.

What is the feature used for?

This feature is often used in data entry forms to provide helpful guidance to users on how to correctly input data. The message typically appears as a pop-up or tooltip that appears when the user clicks on the relevant cell or field.

The message can include information about valid input formats, allowable values, or other data requirements. By using this feature, users can be confident that they are entering valid data, and they can avoid making mistakes that could lead to errors or system failures.

Answers

Answer:

Here is a structured pseudocode that describes how to buy a new shirt, including at least two decisions and two loops:

```

procedure buy_shirt()

declare

desired_color: string

desired_pattern: string

desired_size: string

desired_price: integer

found_shirt: boolean

begin

print "What color shirt do you want?"

read desired_color

print "What pattern do you want?"

read desired_pattern

print "What size do you want?"

read desired_size

print "What price are you willing to pay?"

read desired_price

found_shirt := false

while not found_shirt do

print "Searching for a shirt..."

for each shirt in store do

if shirt.color = desired_color and shirt.pattern = desired_pattern and shirt.size = desired_size and shirt.price <= desired_price then

found_shirt := true

break

end if

end for

end while

if found_shirt then

print "Found shirt!"

print shirt.color, " ", shirt.pattern, " ", shirt.size, " ", shirt.price

print "Do you want to buy it?"

read answer

if answer = "yes" then

buy shirt

end if

else

print "No shirt found."

end if

end procedure

```

This pseudocode includes two decisions: one to determine whether the desired shirt has been found, and another to determine whether the user wants to buy the shirt. It also includes two loops: one to search the store for the desired shirt, and another to allow the user to enter their answer.

Explanation:

1. Write a Java application that:
a. asks the user for the daily sales for each day of a week using a repetition loop and calculates its total.
b. calculates the average daily sales for the week
c. displays the total and average sales for the week.

Each of the three components of the program should be handled by a different method.

Answers

Here is a Java application that asks the user for the daily sales for each day of a week using a repetition loop and calculates its total, calculates the average daily sales for the week, and displays the total and average sales for the week.

The Program

import java.util.Scanner;

public class WeeklySales {

public static void main(String[] args) {

double[] sales = getDailySales();

double totalSales = calculateTotalSales(sales);

double averageSales = calculateAverageSales(sales);

displaySales(totalSales, averageSales);

}

public static double[] getDailySales() {

Scanner scanner = new Scanner(System.in);

double[] sales = new double[7];

for (int i = 0; i < 7; i++) {

System.out.print("Enter the daily sales for day " + (i+1) + ": ");

sales[i] = scanner.nextDouble();

}

scanner.close();

return sales;

}

public static double calculateTotalSales(double[] sales) {

double totalSales = 0;

for (int i = 0; i < sales.length; i++) {

totalSales += sales[i];

}

return totalSales;

}

public static double calculateAverageSales(double[] sales) {

double totalSales = calculateTotalSales(sales);

double averageSales = totalSales / sales.length;

return averageSales;

}

public static void displaySales(double totalSales, double averageSales) {

System.out.println("Total sales for the week: " + totalSales);

System.out.println("Average daily sales for the week: " + averageSales);

}

The getDailySales() method asks the user for the daily sales for each day of the week using a for loop and stores them in an array of doubles. It returns the array.

The calculateTotalSales(double[] sales) method calculates the total sales for the week by adding up all the daily sales in the array. It returns the total sales as a double.

The calculateAverageSales(double[] sales) method calculates the average daily sales for the week by dividing the total sales by the number of days (i.e., the length of the array). It returns the average sales as a double.

The displaySales(double totalSales, double averageSales) method displays the total and average sales for the week to the user using the println() method.

Answers

Emma needs to think about how well and with what programmes the security software works. She can buy the product from trustworthy retailers like Norton or McAfee.

What function does security software serve?

Antivirus software stops malware from harming your device by identifying, containing, and/or removing malicious code. Modern antivirus programmes automatically update themselves to offer security against the most recent viruses and malware.

How well does security software work?

Antivirus software only successfully detects adware in 25% of cases on average. Unfortunately, according to statistics on computer viruses and antivirus software, the fight is being won by malicious apps.

To know more about McAfee visit:

https://brainly.com/question/30301867

#SPJ9

2. Consider a computer system called 3P2M in the following figure. The 3P2M system consists of three processors and two shared memories communicating over a shared bus, as shown in the following Figure. The system is operational as long as at least two processors can communicate with at least one of the two memories over the bus.

a) Construct the fault tree model of this system
b) Find all the minimal cut sets
c) Assume all the components fail exponentially with the following failure rates: processors (P1, P2, P3): 0.0001/hour; memories (M1, M2): 0.0001/hour; bus: 0.000001/hour. Find the system reliability at mission time t=100 hours.

Answers

1. The probability of the component surviving 200 hours is 0.9608 and still functioning after 400 hours is 0.8862.

2. Assuming all the components fail exponentially, the system's reliability at mission time t = 100 hours is 0.999985.

How to calculate system's reliability?

1) To determine the probability that the component survives 200 hours, we need to use the survival function, which is the complement of the cumulative distribution function (CDF).

The CDF gives the probability that the component fails before or at time t, and is given by:

F(t) = 1 - e^(-∫z(u)du), where the integral is taken from 0 to t.

In this case, the failure rate function is z(t) = 2.0 × 10⁻⁶ t/hour for t > 0, so the integral becomes:

∫z(u)du = ∫2.0 × 10⁻⁶ u du = 10⁻⁶ u² + C,

where C is a constant of integration. Evaluating this integral from 0 to 200 hours:

∫0²⁰⁰ z(u)du = 10⁻⁶ (200)² = 0.04

So the CDF at 200 hours is:

F(200) = 1 - e^(-0.04) ≈ 0.0392

Therefore, the probability that the component survives 200 hours is:

P(T > 200) = 1 - F(200) ≈ 0.9608

To determine the probability that a component, which is functioning after 200 hours, is still functioning after 400 hours, we need to use the conditional probability formula:

P(T > 400 | T > 200) = P(T > 400 and T > 200) / P(T > 200)

The numerator represents the probability that the component survives beyond 400 hours given that it has already survived 200 hours, while the denominator represents the probability that the component survives beyond 200 hours.

The joint probability of surviving beyond 400 and 200 hours is:

P(T > 400 and T > 200) = P(T > 400)

since if the component survives beyond 400 hours, it necessarily also survives beyond 200 hours.

The probability of surviving beyond 400 hours is:

P(T > 400) = 1 - F(400) = 1 - (1 - e^(-∫z(u)du)) = e^(-∫z(u)du)

Using the same integral as before:

∫0⁴⁰⁰ z(u)du = 10⁻⁶ (400)² = 0.16

So:

P(T > 400) = e^(-0.16) ≈ 0.8521

The probability of surviving beyond 200 hours was found to be approximately 0.9608 in part (1).

Therefore, the probability that a component, which is functioning after 200 hours, is still functioning after 400 hours is:

P(T > 400 | T > 200) = P(T > 400 and T > 200) / P(T > 200)

= P(T > 400) / P(T > 200)

= (e^(-0.16)) / (0.9608)

≈ 0.8862

2) a) Fault tree model of the 3P2M system:

/ | \

P1 P2 P3

| | |

1| 1| 1|

| | |

B B B

| | |

1| 1| 1|

| | |

M1 M2 M1

\ / /

1 1

where P1, P2, and P3 are the processors, M1 and M2 are the memories, B is the bus, and the numbers above the components represent their probabilities of not failing.

b) Minimal cut sets:

{P1, P2, M1}

{P1, P2, M2}

{P1, P3, M1}

{P1, P3, M2}

{P2, P3, M1}

{P2, P3, M2}

c) To calculate the system reliability, we can use the following formula:

R = e^(-λt)

where R is the system reliability, λ is the failure rate, and t is the mission time.

Using this formula, we can calculate the reliability of each component:

Processor: Rp = e^(-0.0001 × 100) = 0.9048

Memory: Rm = e^(-0.0001 × 100) = 0.9048

Bus: Rb = e^(-0.000001 × 100) = 0.9999

Next, use the minimal cut sets to calculate the system reliability. The minimal cut sets are:

{P1, M1, M2}

{P2, M1, M2}

{P3, M1, M2}

{P1, P2, M1}

{P1, P2, M2}

{P1, P3, M1}

{P1, P3, M2}

{P2, P3, M1}

{P2, P3, M2}

The system reliability can be calculated using the following formula:

Rsys = 1 - Σ(Ri × Π(Rj))

where Ri is the reliability of the i-th minimal cut set, and Π(Rj) is the product of the reliabilities of all components in the j-th minimal cut set.

Using this formula, calculate the system reliability:

Rsys = 1 - [(0.0952 × 0.0952 × 0.0952) + (0.0952 × 0.0952 × 0.0952) + (0.0952 × 0.0952 × 0.0952) + (0.9048 × 0.9048 × 0.0952) + (0.9048 × 0.9048 × 0.0952) + (0.9048 × 0.9048 × 0.0952) + (0.9048 × 0.9048 × 0.0952) + (0.9048 × 0.9048 × 0.0952) + (0.9048 × 0.9048 × 0.0952)]

Rsys = 0.999985

Therefore, the system reliability at mission time t=100 hours is approximately 0.999985.

Find out more on computer processor here: https://brainly.com/question/30270798

#SPJ1

Looking at the code below, how many times would the while loop run?

int num = 4;
while(num > 7 && num < 10){
num++;
System.out.println(num);
}

two

one

four

zero

Answers

Where the above loop above is given, the correct answer is: zero.

What is the explanation for the above response?

The while loop in the code below will not run at all because the condition num > 7 && num < 10 is not satisfied since num is initially 4 and is not greater than 7.

Therefore, the code will skip over the while loop and move on to any subsequent code that follows it.

So the correct answer is: zero.

A loop in programming is a control structure that repeats a block of code until a certain condition is met or a certain number of iterations are completed.

Learn more about loop at:

https://brainly.com/question/26568485

#SPJ1

The role of RMP in handling cyber crimes

Answers

RMP, or the Rapid Action Force Cyber Crime Unit, plays a crucial role in handling cyber crimes.

What do they do?

As cyber crimes are becoming increasingly common, the RMP serves as a specialized force dedicated to investigating and solving such cases. They employ advanced techniques and tools to track down cyber criminals and gather digital evidence to build a strong case against them.

Additionally, the RMP works closely with other law enforcement agencies and international organizations to coordinate efforts and combat cyber crimes on a global scale. Their role is critical in ensuring the safety and security of individuals and businesses in the digital age.

Answers

The guidelines for presenting a document may vary depending on the type of document and the specific requirements of the intended audience. However, there are some general guidelines that can be applied to most types of documents:

Use a clear and easy-to-read font, such as Times New Roman or Arial, and a font size that is appropriate for the intended audience (usually 12-point font).

Use a consistent formatting style throughout the document, including headings, subheadings, and body text.

Use white space and margins to create a balanced layout and make the document visually appealing.

Use graphics, charts, and other visual aids to help convey complex information and break up the text.

Use bullet points, numbered lists, and other formatting options to help organize the content and make it easier to read.

Ensure that the document is properly proofread for spelling and grammar errors before presenting it to the intended audience.

Consider the use of a table of contents, index, or glossary if appropriate.

Use appropriate language and tone for the intended audience and purpose of the document.

Include a clear and concise summary or conclusion that highlights the main points of the document.

Consider the use of a cover page, title page, or header/footer that includes important information such as the title, author, date, and page numbers.

Which of the following are easy/difficult to handle in Virtual-Circuit and Datagram subnets, and why?

i) Router memory space

ii)Quality-of-service

iii) Congestion control

iv) Router failure

Answers

For each one of the options being handled by Virtual-Circuit and Datagram subnets we get:

Router memory space: easyQuality-of-service: easyCongestion control: easyRouter failure: hard.

Which ones are easy and difficult?

Each one of the options are:

i) Router memory space: In virtual-circuit subnets, router memory space is typically easier to handle than in datagram subnets. This is because virtual-circuit subnets reserve a fixed amount of memory for each connection, whereas datagram subnets must allocate memory for each packet individually.

ii) Quality-of-service: Quality-of-service is generally easier to handle in virtual-circuit subnets than in datagram subnets. This is because virtual-circuit subnets can reserve bandwidth and allocate resources in advance.

iii) Congestion control: Congestion control is generally easier to handle in virtual-circuit subnets than in datagram subnets. This is because virtual-circuit subnets can reserve bandwidth in advance, which can help prevent congestion from occurring in the first place.

iv) Router failure: Router failure can be more difficult to handle in virtual-circuit subnets than in datagram subnets. This happens because in virtual-circuit subnets, a failed router can cause all connections that pass through it to fail. In datagram subnets, packets can be rerouted around a failed router, which can help prevent widespread network outages.

Learn more about Virtual-Circuit and Datagram subnets at:

https://brainly.com/question/28561061

#SPJ1

Read CIO article What is an SLA? Best Practices

Read CIO article 10 do's and dont's for crafting more effective SLAs

Find an SLA example. Review it. What suggestions could you give to craft this SLA better (that you learned from the articles above?) How would these suggestions make the SLA more effective?

Make sure to list the references.

Answers

SLA stands for Service Level Agreement, which is a contract between a service provider and a customer that outlines the level of service that will be provided, as well as any guarantees or warranties.

What is the article about?

The purpose of an SLA is to ensure that the service provider delivers a quality service that meets the customer's expectations.

The CIO article "What is an SLA? Best Practices" provides useful tips for creating effective SLAs, including defining clear and measurable service levels, ensuring that the SLA aligns with the customer's business objectives, and regularly reviewing and updating the SLA to ensure that it remains relevant and effective.

In addition, the article "10 Do's and Don'ts for Crafting More Effective SLAs" offers practical advice for creating SLAs that are focused on the customer's needs, including involving the customer in the SLA creation process, providing transparency in service reporting, and avoiding overly complicated language and metrics.

One example of an SLA can be found on the website of Amazon Web Services (AWS), a cloud computing platform. The AWS SLA guarantees a certain level of availability for its services, with credits provided to customers if the availability falls below the stated level.

Therefore, To improve this SLA, it would be beneficial to provide more specific details on the measurement and reporting of service availability, as well as clearer guidelines for when and how credits will be provided to customers

References:

"What is an SLA? Best Practices." CIO, https://www.cio.com/article/2438283/what-is-an-sla-best-practices.html.

"10 Do's and Don'ts for Crafting More Effective SLAs." CIO, https://www.cio.com/article/2388029/10-do-s-and-don-ts-for-crafting-more-effective-slas.html.

"Service Level Agreement." Amazon Web Services, https://aws.amazon.com/service-terms/service-level-agreement/.

Answers

The correct option is A, these where called main frame computers because they needed the size of a large room.

Which one is true of First Generation Computer?

The first generation of computers refers to the period from the late 1940s to the mid-1950s, during which the first electronic computers were developed.

These computers were characterized by the use of vacuum tubes for circuitry and magnetic drums for memory storage. They were also very large and expensive, and were primarily used by government agencies and large corporations for scientific and military purposes.

These early computers were known as mainframe computers and were the size of a large room or even an entire building, then the correct option is A.

Learn moer about First Generation Computers at:

https://brainly.com/question/20299373

#SPJ1

Write a class named Car that has the following member variables:

• Year. An int that holds the car's model year.
• Make. A string object that holds the make if the car.
• Speed. An int that holds the car's current speed

In addition, the class should have the following member functions program that implements class structure.

• Constructor. The constructor should accept the car's vear and make arguments and assign these values to the object's year and make member variables. The constructor should initialize the speed member variable to 0.

• Accessors. Appropriate accessor methods should be created to allow values to be retrieved from the object's year, make, and speed member variables
• accelerate. The accelerate method should add 5 to the speed member variable each time it is called.
• brake. The brake method should subtract from the speed member variable each time it is called.
Write a program that will create the Car object. It will ask the users for the number of times the car will accelerate and brake.
(LOOK AT PIC BELOW, PYTHON))

Answers

An example implementation of the Car class in Python is given as follows:

class Car:

def __init__(self, year, make):

self.year = year

self.make = make

self.speed = 0

def get_year(self):

return self.year

def get_make(self):

return self.make

def get_speed(self):

return self.speed

def accelerate(self):

self.speed += 5

def brake(self):

self.speed -= 5

if self.speed < 0:

self.speed = 0

car = Car(2022, "Tesla")

accelerate_times = int(input("How many times do you want to accelerate? "))

brake_times = int(input("How many times do you want to brake? "))

for i in range(accelerate_times):

car.accelerate()

print("Accelerating... Speed is now", car.get_speed())

for i in range(brake_times):

car.brake()

print("Braking... Speed is now", car.get_speed())

What is the explanation for the above response?

This program creates a Car object with the year 2022 and make "Tesla", and then prompts the user for the number of times to accelerate and brake. It uses a for loop to call the accelerate and brake methods on the Car object the specified number of times, and prints the updated speed after each call.

The prompt requires creating a Car class with member variables year (int), make (string), and speed (int), as well as appropriate member functions, including constructor, accessors, accelerate (adds 5 to speed), and brake (subtracts from speed). The program should allow user input for how many times the car should accelerate and brake.

Learn more about Phyton at:

https://brainly.com/question/16757242

#SPJ1

The first set of information you see on your monitor, after signing in and going through any security messages is (are) _____.

Answers

The first set of information you see on your monitor, after signing in and going through any security messages are icons for programs, a taskbar or a login screen.

Display on the monitor through security messages

The first set of information that is typically displayed on a monitor after signing in and going through any security messages will depend on the user's settings and preferences.

It could be a desktop background image, icons for various programs or applications, a taskbar or dock with shortcuts, or a login screen for the user's email or messaging platform.

Some users may have a customized startup sequence that automatically launches certain applications or programs upon login.

Ultimately, the initial display will be determined by the user's preferences and settings.

Read more about monitors at: https://brainly.com/question/29650773

#SPJ1

Looking at the code below, what answer would the user need to give for the while loop to run?

System.out.println("Pick a number!");
int num = input.nextInt();

while(num > 7 && num < 9){
num--;
System.out.println(num);
}

9

2

7

8

Answers

The number that the user would need for the whole loop to run would be D. 8.

What integer is needed for the loop to run ?

For the while loop to run, the user needs to input a number that satisfies the condition num > 7 && num < 9. This condition is only true for a single integer value:

num = 8

The loop will only run if the number is greater than 7 and less than 9 at the same time. There is only one integer that satisfies this condition: 8.

If the user inputs 8, the while loop will run.

Find out more on loops at https://brainly.com/question/19344465

#SPJ1

Activity

Online security is a major issue for internet users. Threats may affect your data and applications (both online and offline), or infect your system and use up system resources.

Part A

Check your email account. Check if your email provider has a spam filter. Don’t open the email messages, but determine as much information as you can from the subject lines. Does it contain any emails that you can identify as spam? What kind of emails are they? Do they have anything in common?

Answers

Unwanted emails known as spam are distributed to several recipients in bulk. They frequently include false information, including promotions for goods or services that seem too good to be true.

Is sending bulk, unsolicited emails that you haven't requested considered spamming?

Spam is any sort of bulk, unsolicited communication (Unsolicited Bulk Email, or UBE). A business email sent to many addresses is the most common form (Unsolicited Commercial Email, or UCE)

Unsolicited bulk email means that the recipient did not consent to receiving it.

Unsolicited bulk email is referred to as "Spam" when used in reference to email. Unsolicited signifies that the recipient has not given the communication their explicit consent.

To know more about emails visit:-

https://brainly.com/question/14666241

#SPJ1

In a masm program I have to calculate an average grade of 4 tests, the array values are already declared so no inputs are needed. How do I do that without needing a loop since I’m not allowed to

Answers

[tex] \bf \red {Answer}[/tex]

If you're not allowed to use a loop, one way to calculate the average grade of 4 tests is to add up all the values in the array and then divide by 4. Here's an example MASM program that does this:

```

.586

.model flat,stdcall

.stack 4096

ExitProcess PROTO,dwExitCode:DWORD

.data

tests DWORD 80, 90, 85, 95

numTests DWORD 4

average DWORD ?

.code

main PROC

; Calculate the sum of all test scores

mov eax, 0

add eax, tests[0]

add eax, tests[4]

add eax, tests[8]

add eax, tests[12]

; Divide sum by 4 to get average

mov ebx, numTests

cdq

idiv ebx

mov average, eax

; Display the average

mov eax, average

call DumpRegs ; Replace with your own code to display the average

; Exit the program

INVOKE ExitProcess,0

main ENDP

END main

```

The program declares an array `tests` with 4 values, a variable `numTests` with the number of tests (4), and a variable `average` to store the calculated average grade. It then calculates the sum of all test scores by adding up the values in the array using the `add` instruction. It divides the sum by 4 to get the average using the `idiv` instruction, which divides the double-word in `edx:eax` by the value in `ebx`, storing the quotient in `eax` and the remainder in `edx`. It stores the calculated average in the `average` variable and displays it using `DumpRegs`. Finally, it exits the program using the `ExitProcess` function.

Note that this program assumes that the array `tests` contains exactly 4 values. If you have a different number of values or if the number of values can vary, you will need to modify the program accordingly.

You have been hired to create a Grilled Rump Steak ordering app. The app should have a class named GrilledRumpSteak which contains data about a single rump. The GrilledRumpSteak class should include the following:
▪ Private instance variables to store the size of the rump (either small, medium, or large), the number of salsa toppings, the number of tomato toppings, and the number of mushroom toppings.
▪ Constructor(s) that set all the instance variables.
▪ Public methods to get and set the instance variables.
▪ A public method named calcCost( ) that returns the cost of the rump as a double. The Grilled
Rump Steak cost is determined by: Large: R200 + 30 per topping Medium: R150 + R20 per
topping Small: R120 + R15 per topping
▪ public method named getDescription( ) that returns a String containing the rump size, quantity
of each topping.
Write test code to create several grilled rump steaks and output their descriptions. For example, a large rump with one salsa, one tomato, and two mushroom toppings should cost a total of R320. Now Create a GrilledRumpSteakOrder class that allows up to three grilled rump steaks to be saved in order. Each grilled rump steak saved should be a GrilledRumpSteak object. Create a method calcTotal() that returns the cost of the order

In android programming

Answers

Answer:

Here is the Java code for the Grilled Rump Steak ordering app:

```

public class GrilledRumpSteak {

private String size;

private int salsaToppings;

private int tomatoToppings;

private int mushroomToppings;

public GrilledRumpSteak(String size, int salsaToppings, int tomatoToppings, int mushroomToppings) {

this.size = size;

this.salsaToppings = salsaToppings;

this.tomatoToppings = tomatoToppings;

this.mushroomToppings = mushroomToppings;

}

public String getSize() {

return size;

}

public void setSize(String size) {

this.size = size;

}

public int getSalsaToppings() {

return salsaToppings;

}

public void setSalsaToppings(int salsaToppings) {

this.salsaToppings = salsaToppings;

}

public int getTomatoToppings() {

return tomatoToppings;

}

public void setTomatoToppings(int tomatoToppings) {

this.tomatoToppings = tomatoToppings;

}

public int getMushroomToppings() {

return mushroomToppings;

}

public void setMushroomToppings(int mushroomToppings) {

this.mushroomToppings = mushroomToppings;

}

public double calcCost() {

double cost = 0;

if (size.equals("Large")) {

cost = 200 + (30 * (salsaToppings + tomatoToppings + mushroomToppings));

} else if (size.equals("Medium")) {

cost = 150 + (20 * (salsaToppings + tomatoToppings + mushroomToppings));

} else if (size.equals("Small")) {

cost = 120 + (15 * (salsaToppings + tomatoToppings + mushroomToppings));

}

return cost;

}

public String getDescription() {

return size + " rump with " + salsaToppings + " salsa topping(s), " + tomatoToppings + " tomato topping(s), and " + mushroomToppings + " mushroom topping(s)";

}

```

Here is the Java code for the GrilledRumpSteakOrder class that allows up to three grilled rump steaks to be saved in order:

```

public class GrilledRumpSteakOrder {

private ArrayList<GrilledRumpSteak> order;

public GrilledRumpSteakOrder() {

order = new ArrayList<GrilledRumpSteak>();

}

public void addGrilledRumpSteak(GrilledRumpSteak rump) {

if (order.size() < 3) {

order.add(rump);

} else {

System.out.println("Maximum of 3 Grilled Rump Steaks per order.");

}

public double calcTotal() {

double total = 0;

for (GrilledRumpSteak rump : order) {

total += rump.calcCost();

}

return total;

}

```

To test the code, you can write the following code in the main method:

```

public static void main(String[] args) {

GrilledRumpSteak rump1 = new GrilledRumpSteak("Large", 1, 1, 2);

GrilledRumpSteak rump2 = new GrilledRumpSteak("Medium", 2, 0, 1);

GrilledRumpSteak rump3 = new GrilledRumpSteak("Small", 0, 3, 1);

System.out.println(rump1.getDescription() + " - Cost: R" + rump1.calcCost());

System.out.println(rump2.getDescription() + " - Cost: R" + rump2.calcCost());

System.out.println(rump3.getDescription() + " - Cost: R" + rump3.calcCost());

GrilledRumpSteakOrder order = new GrilledRumpSteakOrder();

order.addGrilledRumpSteak(rump1);

order.addGrilledRumpSteak(rump2);

order.addGrilledRumpSteak(rump3);

System.out.println("Total cost of order: R" +

You use the ATM machine to withdraw money from your checking account. What set of steps does the DBMS need to perform in order for you to complete your transaction?

Answers

To execute your transaction at the ATM, the DBMS must authenticate your account, check your account balance, process the withdrawal request, update the account balance, and produce a transaction record.

What is an ATM's UI? Which machine components are used for input and output?

The automated teller machine's block diagram largely comprises of two input devices and four output units. The speaker, display screen, receipt printer, and cash depositor are output devices, whereas the card reader and keypad are input devices.

I want to take money out of my bank account.

Fill out a withdrawal paper at a bank branch to make a withdrawal. You can choose to have money taken out of your checking or savings account.

To know more about transaction visit:-

https://brainly.com/question/20301638

#SPJ1

Which of the following statements correctly uses a conditional expression that is equilvant to the following code? If a > b: result = 0 else: result = 0

Answers

A conditional expression in Python that is equivalent to the given code: result = 0 if a > b else 0

Writing the equivalent conditional statement

This uses a conditional expression or ternary operator, which is a shorthand way of writing an if-else statement as a single line of code.

The given expression evaluates to the value 0 if a is greater than b, and to the value 0 otherwise.

The syntax is:

value_if_true if condition else value_if_false

In this case, the condition is a > b, the value if true and value if false are both 0.

Answers

A directory listing all of a storage device's files exists on every storage device. The term "root directory" refers to the main directory. You can create smaller lists from a root directory. A sub-directory is the name given to each list.

What is an illustration of a storage device?Any sort of computational gear that is used to store, transfer, or extract data files and objects is referred to as a storage device. Information can be held and stored by storage devices both momentarily and permanently. They could be within or outside a computer, server, or another computing device. The distinctions between primary and secondary storage devices are outlined in the table below. Examples include hard drives, solid-state drives, CD-ROMs, DVDs, and Blu-ray discs.A removable device, such as an external HDD or USB flash drive, or one that is built inside a computing system, like an SSD, can serve as a storage medium. Magnetic tape, CDs, and non-volatile memory (NVM) cards are some examples of additional storage media.

To learn more about storage devices, refer to:

https://brainly.com/question/26382243

how to use command prompt

Answers

Answer:

Press the Windows key + R on your keyboard to open the Run dialog box. Then, type "cmd" into the box and press enter to open the command prompt.

Explanation:

Write a program that computes a patient's bill for a hospital stay. The different components of the program are
• The PatientAccount class will keep track of the patient's charges. It will keep track of the number of days spent in the hospital.
• The surgery method will have the charges for at least five types of surgery. It will update the charges member variable. A data file will contain at least five types of surgery and its cost. Both type and cost will be separated by commas.
• The pharmacy method will have the charges for at least five types of medication. It will update the charges member variable. A data file will contain at least five types of medication and its cost. Both type and cost will be separated by commas
• The dayCharge method will update the days sent member variable.
• The setName method will assign the name of the patient
• Each day in the hospital costs $1,000
The program will have a menu that allows the user to enter type of surgery, enter type of medication, number of days in the hospital and check the patient out of the hospital.
When the patient checks out, the total charges will be displayed.
(LOOK AT PIC BELOW, PYTHON)

Answers

here's an example implementation of the program in Python

class PatientAccount:

def __init__(self, name):

self.name = name

self.days_spent = 0

self.charges = 0

def surgery(self, surgery_type, cost):

self.charges += cost

print(f"{surgery_type} surgery added to charges.")

def pharmacy(self, medication_type, cost):

self.charges += cost

print(f"{medication_type} medication added to charges.")

def dayCharge(self):

self.days_spent += 1

print("Day charge added.")

def setName(self, name):

self.name = name

print(f"Name set to {name}.")

def getTotalCharges(self):

total_charges = self.days_spent * 1000 + self.charges

print(f"Total charges: ${total_charges}")

return total_charges

patient = PatientAccount("John Doe")

while True:

print("Hospital Bill Menu:")

print("1. Add surgery")

print("2. Add medication")

print("3. Add day charge")

print("4. Set patient name")

print("5. Check out and calculate total charges")

choice = input("Enter choice (1-5): ")

if choice == "1":

surgery_type = input("Enter type of surgery: ")

cost = float(input("Enter cost: "))

patient.surgery(surgery_type, cost)

elif choice == "2":

medication_type = input("Enter type of medication: ")

cost = float(input("Enter cost: "))

patient.pharmacy(medication_type, cost)

elif choice == "3":

patient.dayCharge()

elif choice == "4":

name = input("Enter patient name: ")

patient.setName(name)

elif choice == "5":

total_charges = patient.getTotalCharges()

break

else:

print("Invalid choice. Try again.")

print("Thank you for using the hospital bill program.")

Explanation:

This program defines a PatientAccount class that keeps track of the patient's name, days spent in the hospital, and charges. It also includes methods to add surgery and medication charges, add day charges, and set the patient name. The getTotalCharges method calculates the total charges based on the number of days spent in the hospital and the accumulated charges.

The program uses a while loop to display a menu of options and accept user input. The user can add surgery or medication charges, add a day charge, set the patient name, or check out and calculate the total charges. The loop continues until the user chooses to check out.

Olivia is excited about with the golf clubs Justin gave her for her birthday, so she smiles broadly and jumps up and down. Olivia’s use of nonverbal communication is an example of which principle of nonverbal communication?

Group of answer choices
Nonverbal communication is more ambiguous than verbal
Nonverbal communication is more credible
Nonverbal messages structure conversation
Nonverbal communication conveys emotional messages

Answers

Olivia's use of nonverbal communication in this situation is an example of the principle that nonverbal communication conveys emotional messages.

What is communication?

Olivia's broad smile and jumping up and down indicate her excitement and happiness about the gift she received. Nonverbal cues such as facial expressions, tone of voice, and body language often convey emotions more accurately and powerfully than words alone.

Therefore, Nonverbal communication refers to any form of communication that does not involve the use of words, such as facial expressions, body language, gestures, and tone of voice. It is an important aspect of human communication because it can convey a range of messages and emotions that cannot be expressed through words alone.