Answers:
a) The speed of the ball in the vertical position of the pendulum is approximately 12.65 m/s.
b) The centripetal acceleration of the ball in the vertical position of the pendulum is approximately 199.06 m/s².
a) To find the speed of the ball in the vertical position of the pendulum, we can use the concept of conservation of energy. At the highest point of the pendulum swing, all the potential energy is converted into kinetic energy.
The potential energy at the highest point is given by the formula:
PE = m * g * h
where:
m is the mass of the ball (0.2 kg),
g is the acceleration due to gravity (10 m/s²), and
h is the height from the lowest point to the highest point (equal to the length of the pendulum, 0.8 m).
Substituting the values into the formula, we have:
PE = 0.2 kg * 10 m/s² * 0.8 m
The potential energy is equal to the kinetic energy at the highest point:
PE = KE
0.2 kg * 10 m/s² * 0.8 m = 0.5 * m * v²
Simplifying the equation, we find:
16 = 0.1 * v²
Dividing both sides by 0.1, we get:
v² = 160
Taking the square root of both sides, we find:
v ≈ 12.65 m/s
b) The centripetal acceleration of the ball in the vertical position of the pendulum is the acceleration directed towards the center of the circular path. It can be calculated using the formula:
a = v² / r
where:
v is the speed of the ball (12.65 m/s),
r is the radius of the circular path (equal to the length of the pendulum, 0.8 m).
Substituting the values into the formula, we have:
a = (12.65 m/s)² / 0.8 m
Calculating the value, we find:
a ≈ 199.06 m/s²
To know more about centripetal acceleration
https://brainly.com/question/17123770
#SPJ11
An electron is
-a particle and a wave, or at least behaves as such.
-a particle and a wave, or at least behaves as such, which is referred to as the electromagnetic spectrum.
-a particle, as opposed to electromagnetic radiation, which consists of waves.
-the nucleus of an atom, with the protons orbiting around it.
An electron is a particle and a wave, or at least behaves as such. Hence the correct answer is option a.
An electron possesses characteristics such as mass (or lack thereof) and electric charge. On the other hand, electromagnetic radiation is defined by its frequency and wavelength. While electrons are particles and not waves, they can exhibit wave-like properties, leading to their classification as both particles and waves.
Electromagnetic radiation, on the other hand, refers to the type of energy that travels through space. It is characterized by its frequency and wavelength. The electromagnetic spectrum encompasses the entire range of frequencies of electromagnetic radiation, spanning from low-frequency radio waves to high-frequency gamma rays. Electrons, being particles, do not fall within the realm of electromagnetic radiation. However, due to their wave-particle duality, they can possess wave-like characteristics.
The nucleus of an atom is composed of protons and neutrons, which are held together by the strong nuclear force. Electrons, in turn, orbit around the nucleus in shells or energy levels, depending on their energy state. Electrons carry a negative charge, while protons bear a positive charge, and neutrons have no charge. The number of protons within the nucleus determines the element to which the atom belongs.
Learn more about the properties of electrons:
https://brainly.com/question/7205313
#SPJ11
A tennis ball, with a mass of 0.05 kg, is accelerated with a rate of 5000 m/s2. how much force was applied for the tennis ball ?
The amount of force that was applied to the tennis ball is 250 N.
To solve the given problem, we will use Newton's second law of motion, which states that the net force acting on an object is equal to the product of its mass and acceleration.
The formula for Newton's second law of motion is given as:
F = ma
Where,
F is the net force acting on the object
m is the mass of the object
a is the acceleration of the object
Mass of the tennis ball, m = 0.05 kg
Rate of acceleration, a = 5000 m/s²
Now, we can use Newton's second law of motion to calculate the net force that was applied to the tennis ball:
F = ma
= 0.05 kg × 5000 m/s²
= 250 N
Therefore, the amount of force that was applied to the tennis ball is 250 N.
Learn more about the Newton's second law:
brainly.com/question/25545050
#SPJ11
A 1.2 kg ball of clay is thrown horizontally with a speed of 2 m/s, hits a wall and sticks to it. The amount of energy stored as thermal energy is
Answer:
the amount of energy stored as thermal energy is 2.4 Joules.
Explanation:
The amount of energy stored as thermal energy can be calculated by considering the initial kinetic energy of the ball and the final thermal energy after the collision.
The initial kinetic energy of the ball can be calculated using the formula:
Kinetic energy = (1/2) * mass * velocity^2
Plugging in the values:
Kinetic energy = (1/2) * 1.2 kg * (2 m/s)^2
= 2.4 J
Three bodies of masses m 1
=6 kg and m 2
=m 3
=12 kg are connected as shown in the figure and pulled toward right on a frictionless surface. If the magnitude of the tension T 3
is 60 N, what is the magnitude of tension T 2
( in N) ?
The magnitude of tension T2 is 18 N.
In the given figure, three bodies of masses m1=6 kg and m2=m3=12 kg are connected. And, they are pulled towards right on a frictionless surface. If the magnitude of tension T3 is 60 N, then we need to determine the magnitude of tension T2.Let's consider the acceleration of the system, which is common to all three masses. So, for m1,m2, and m3, we have equations as follows:6a = T2 - T112a = T3 - T216a = T2 + T3By solving above equations, we get T2 = 18 N. Hence, the magnitude of tension T2 is 18 N.
To know more about horizontal visit:
https://brainly.com/question/31166587
#SPJ11
For each statement, select True or False
a) Total internal reflection of light can happen when light travels between any 2 mediums as long as the correct angle is used for the incident light.
b) The index of refraction of a medium depends on the wavelength of incident light.
c) We can see the color of a purple flower because the flower absorbs all colors except the purple
d) According to the Second Postulate of Relativity, if a source of light is travelling at a speed v, then thelight wave will travel at speed cry for an observer at rest respect to the source
e) Simultaneity is absolute. 2 events that happen at the same time in a reference frame will also be simultaneous in any other reference frame as long as it is inertial.
f) According to the theory of Relativistic Energy, an object with mass M, at rest, and with zero potential energy, has a zero total energy.
g) If a train travels at a speed close to the speed of light, an observer at rest on the platform will see a contraction of the train in both the vertical and horizontal directions.
h) Optical fibers can guide the light because of the total internal reflection of light.
i) If you are at rest on a platform, measuring the time it takes for a train to pass in front of you, you are measuring the proper time
j) The lifetime of a particle measured in a lab will always be larger than the lifetime in the particle's reference system
a) Trueb) Falsec) True d) Fale) Falsef) Falseg) Falseh) Truei) Truej) False.
a) The statement "Total internal reflection of light can happen when light travels between any 2 mediums as long as the correct angle is used for the incident light" is True.b) The statement "The index of refraction of a medium depends on the wavelength of incident light" is False.c) The statement "We can see the color of a purple flower because the flower absorbs all colors except the purple" is True.
d) The statement "According to the Second Postulate of Relativity, if a source of light is travelling at a speed v, then the light wave will travel at speed cry for an observer at rest respect to the source" is False.e) The statement "Simultaneity is absolute. 2 events that happen at the same time in a reference frame will also be simultaneous in any other reference frame as long as it is inertial" is False.
f) The statement "According to the theory of Relativistic Energy, an object with mass M, at rest, and with zero potential energy, has a zero total energy" is False.g) The statement "If a train travels at a speed close to the speed of light, an observer at rest on the platform will see a contraction of the train in both the vertical and horizontal directions" is False.h) The statement "Optical fibers can guide the light because of the total internal reflection of light" is True.
i) The statement "If you are at rest on a platform, measuring the time it takes for a train to pass in front of you, you are measuring the proper time" is True.j) The statement "The lifetime of a particle measured in a lab will always be larger than the lifetime in the particle's reference system" is False.
Learn more about energy here,
https://brainly.com/question/2003548
#SPJ11
Why as shown in the figure below, starting in a reglon of zero magnetic fleid, and then entering a reglon of uniform maghetie field, pointing leto the page, with a How long (in s) is the electron in the regian of nonzero fiesd? b) The electron penetretes a maximum depth of 2.10 cm into the reglon of nonzero field. What is the kinetic energy (in ev) of the eictron? eY
A) The electron is in the region of nonzero field for 3.5 × 10^-9 seconds.b) The kinetic energy of the electron is 6.44 × 10^5 eV.
a) The formula used to find the time taken by the electron in the region of the nonzero field is given by,t = L / v
where L is the distance travelled and v is the velocity of the electron.t = 2.1 × 10^-2 / (6.0 × 10^6)t = 3.5 × 10^-9 secondsb)
The formula used to find the kinetic energy of the electron is given by,K.E = 1/2 × m × v^2
where m is the mass of the electron and v is its velocity.
Here, we can use the value of v obtained in part (a).K.E = 1/2 × 9.11 × 10^-31 × (6.0 × 10^6)^2K.E = 1.03 × 10^-13 J
To convert this into eV, we divide by the charge of an electron, which is 1.6 × 10^-19 C.K.E = 1.03 × 10^-13 / 1.6 × 10^-19K.E = 6.44 × 10^5 eV
Answer: a) The electron is in the region of nonzero field for 3.5 × 10^-9 seconds.b) The kinetic energy of the electron is 6.44 × 10^5 eV.
Know more about kinetic energy here,
https://brainly.com/question/999862
#SPJ11
A car moving at 8.9 m/s crashes into a tree and stops in 0.25 s. Calculate the force the seat belt exerts on a passenger in the car to bring him to a halt. The mass of the passenger is 76 kg.
The seat belt exerts a force of 2,696 N on the passenger to bring them to a halt.
When the car collides with the tree, the passenger's body will continue moving at the same speed as the car until it is restrained by the seat belt.
At this point, the car's momentum is transferred to the passenger's body, resulting in a force being exerted on the passenger.
Since the passenger is restrained by the seat belt, an equal and opposite force is exerted by the seat belt on the passenger to bring them to a halt.
To calculate the force exerted by the seat belt on the passenger, we can use the formula:
Force (F) = mass (m) * acceleration (a)
Given that the mass of the passenger is 76 kg, and the car stops in 0.25 seconds, we can calculate the acceleration experienced by the passenger. The initial velocity of the car is 8.9 m/s, and the final velocity is 0 m/s. Using the formula:
The acceleration (a) can be calculated by dividing the change in velocity (final velocity - initial velocity) by the time (t).
Acceleration (a) = (0 - 8.9) m/s / 0.25 s
This gives us an acceleration of -35.6 m/s², with the negative sign indicating that the acceleration is in the opposite direction of the initial motion.
Substituting the values of mass and acceleration into the force formula:
Force (F) = 76 kg * (-35.6 m/s²)
This results in a force of -2,696 N. The negative sign indicates that the force is directed opposite to the passenger's initial motion.
Therefore, the seat belt exerts a force of 2,696 N on the passenger to bring them to a halt.
Learn more about force at: https://brainly.com/question/12785175
#SPJ11
A roller coaster cart starts from rest out at the top of a hill of height 10 m. How fast is it going when it reaches the bottom? 24 m/s 20 m/s 14 m/s 17 m/s 22 m/s A spring has a spring stiffness constant, k, of 400 N/m. How much must this spring be stretched to store 8.0 J of potential energy? 0.20 m O 0.17 m 0.22 m 0.10 m 0.14 mi
(a) The roller coaster cart will be going 20 m/s when it reaches the bottom. (b) The spring must be stretched 0.20 m to store 8.0 J of potential energy.
(a) The speed of the roller coaster cart at the bottom of the hill can be determined using the principle of conservation of energy. At the top of the hill, the cart has gravitational potential energy, given by mgh, where m is the mass of the cart, g is the acceleration due to gravity, and h is the height of the hill. This potential energy is converted to kinetic energy at the bottom of the hill, given by (1/2)mv^2, where v is the velocity of the cart. Equating the two energies, we have mgh = (1/2)mv^2. Solving for v, we find v = sqrt(2gh). Substituting the given values, we get v = sqrt(2 * 9.8 m/s^2 * 10 m) ≈ 20 m/s.
(b) The potential energy stored in a spring is given by the equation U = (1/2)kx^2, where U is the potential energy, k is the spring stiffness constant, and x is the displacement of the spring from its equilibrium position. Rearranging the equation, we can solve for x: x = sqrt(2U/k). Substituting the given values, we find x = sqrt((2 * 8.0 J) / 400 N/m) = sqrt(0.04 m²) = 0.20 m.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
according to : y =\lambdaD/d
the approximate width of the central bright fringe
from a single slit diffraction
1. will increase with increasing wave length
2. will increase will increasing slit width
3. both of the above
4. does not depend on wave length or slit width
According to the equation y = λD/d, the approximate width of the central bright fringe from a single slit diffraction will depend on both the wavelength of light used and the width of the slit itself.
Therefore, the correct option is option c. This means that the width of the central bright fringe will increase with increasing wavelength, as well as with increasing slit width.
The equation y = λD/d is used to calculate the position of the nth bright fringe in a single slit diffraction pattern, where y is the distance from the center of the pattern to the fringe, λ is the wavelength of light used, D is the distance between the slit and the screen, and d is the width of the slit.
As per the equation, the width of the central bright fringe (n = 0) is given by the formula y0 = λD/d. Therefore, it can be inferred that the width of the central bright fringe will increase as the wavelength of light used increases, as well as with an increase in the width of the slit.
To know more about slits visit:
https://brainly.com/question/31551061
#SPJ11
A stone of mass 40 kg sits at the bottom of a bucket. A string of length 1.0 m is attached to the bucket and the whole thing is made to move in circles with the speed of 4.5 m/s. What is the magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory? 12 16 14 10 18 What work should be done by an external force to lift a 2.00 kg block up 2.00 m? O 59 J 98 J 78 J 69 J O:39 J
The force acting on the stone is the force it exerts on the bucket. Therefore, option (b) is 16 is the correct answer to the first question. Therefore, option (e) 39J is the correct answer to the second question.
The magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory is 40 N.
Work done by an external force to lift a 2.00 kg block up 2.00 m is 39 J.
According to the problem, A stone of mass 40 kg sits at the bottom of a bucket, and a string of length 1.0 m is attached to the bucket and the whole thing is made to move in circles with the speed of 4.5 m/s.
So, the centripetal force acting on the stone can be calculated by the formula F = mv2/r
where m is the mass of the stone, v is the speed of the bucket, and r is the length of the string.
We know that m = 40 kg, v = 4.5 m/s, and r = 1 m.So, F = 40 x 4.52/1= 810 N
Now, the force acting on the stone is the force it exerts on the bucket. Therefore, the magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory is 810 N or 40 N (approximately).Therefore, option (b) is the correct answer to the first question.
Work done by an external force to lift a 2.00 kg block up 2.00 m can be calculated using the formulaW = mghwhere m is the mass of the block, g is the acceleration due to gravity, and h is the height through which the block is lifted.
We know that m = 2.00 kg, g = 9.81 m/s2, and h = 2.00 m.So, W = 2.00 x 9.81 x 2.00= 39.24 J or 39 J (approximately).
Therefore, option (e) is the correct answer to the second question.
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11
A runner A takes 4 minutes to travel 1 mile (1.6 km) and a marathon runner B takes 2.25 hours to travel 42 km. (a) Determine the average speeds. (b) How long would the marathon take if it were traveled at the speed of runner A.
The average speed of runner A is 24 km/h. (a) To determine the average speeds, we can use the formula:
Speed = Distance / Time.
For runner A:
Distance = 1.6 km,
Time = 4 minutes = 4/60 hours.
Speed_A = 1.6 km / (4/60) hours.
For runner B:
Distance = 42 km,
Time = 2.25 hours.
Speed_B = 42 km / 2.25 hours.
(b) To find out how long the marathon would take if it were traveled at the speed of runner A, we can use the formula:
Time = Distance / Speed.
For runner A:
Distance = 42 km,
Speed = Speed_A (calculated in part a).
Time_A = 42 km / Speed_A.
(a) Average speeds:
For runner A:
Distance = 1.6 km,
Time = 4 minutes = 4/60 hours.
Speed_A = 1.6 km / (4/60) hours.
Calculating Speed_A:
Speed_A = 1.6 km / (4/60) hours
= 1.6 km / (1/15) hours
= 1.6 km * (15/1) hours
= 24 km/h.
Therefore, the average speed of runner A is 24 km/h.
For runner B:
Distance = 42 km,
Time = 2.25 hours.
Speed_B = 42 km / 2.25 hours.
Calculating Speed_B:
Speed_B = 42 km / 2.25 hours
= 18.67 km/h (rounded to two decimal places).
Therefore, the average speed of runner B is 18.67 km/h.
(b) Time for marathon at the speed of runner A:
For runner A:
Distance = 42 km,
Speed = Speed_A = 24 km/h.
Time_A = 42 km / Speed_A.
Calculating Time_A:
Time_A = 42 km / 24 km/h
= 1.75 hours.
Therefore, if the marathon were traveled at the speed of runner A, it would take 1.75 hours to complete.
To know more about The average speed
brainly.com/question/13318003
#SPJ11
A dentist's drill starts from rest. After 2.70 s of constant angular acceleration, it turns at a rate of 2.51×10 4
rev/min. (a) Find the drill's angular acceleration. rad/s 2
(along the axis of rotation) (b) Determine the angle through which the drill rotates during this period. rad
(a) Angular acceleration is 972.9 [tex]rad/s^2[/tex] (b) angle through which the drill rotates during this period is 3520.8 rad.
The rate at which the angular velocity of an item changes over time is determined by its angular acceleration. It measures the rate of change in rotational speed or direction of an object. The difference between the change in angular velocity and the change in time is known as angular acceleration.
It is measured in radians per square second (rad/s2) units. An increase in angular velocity is indicated by positive angular acceleration, whereas a decrease is indicated by negative angular acceleration. It is affected by things like the torque that is given to an object, that object's moment of inertia, and any outside forces that are acting on it. Understanding rotational motion and the behaviour of rotating objects requires an understanding of angular acceleration, a fundamental term in rotational dynamics.
(a) The formula for the angular acceleration is given by the following:α = ωf - ωi/t
The given values are,ωi = 0 (The drill starts from rest)ωf = 2.51×104 rev/min = (2.51×104 rev/min)*([tex]2\pi[/tex] rad/1 rev)*(1 min/60 s) = 2628.9 rad/st = 2.70 sα = ?
Therefore,α = (2628.9 rad/s - 0 rad/s)/(2.70 s)α = 972.9 rad/[tex]s^2[/tex]
Therefore, the angular acceleration of the drill is 972.9 rad/[tex]s^2[/tex].
(b) The formula for the angular displacement is given by the following:θ = ωi*t + (1/2)α[tex]t^2[/tex]
The given values are,ωi = 0 (The drill starts from rest)t = 2.70 sα = 972.9 rad/[tex]s^2[/tex]
Therefore,θ = 0*(2.70 s) + [tex](1/2)*(972.9 rad/s²)*(2.70 s)²θ[/tex] = 3520.8 rad
Therefore, the angle through which the drill rotates during this period is 3520.8 rad.
Learn more about angular acceleration here:
https://brainly.com/question/30237820
#SPJ11
What is the electric potential energy of the group of charges in (Figure 1)? Assume that q=−6.5nC Express your answer with the appropriate units.
Electric potential energy = 14.8 N•m = 14.8 JAnswer: 14.8 J.
The electric potential energy of the group of charges in (Figure 1) when q = −6.5 nC can be calculated using the formula:Electric potential energy = (k * q1 * q2) / rWhere k is Coulomb's constant, q1 and q2 are the magnitudes of the charges and r is the distance between the charges.Given,Five charges of +2.5 nC each are placed at the corners of a square with 7.8 cm sides. Assume that q=−6.5 nC,So, the total charge of the four corner charges will be q1 = 2.5 nC * 4 = 10 nC.
The electric potential energy due to the 4 corner charges and the center charge will beElectric potential energy = k * q1 * q2 * (2/r) + k * q1 * q2 * (2 * sqrt2 / r)where, k = 8.99 × 10^9 N*m^2/C^2 = Coulomb's constantq1 = 10 nC (total charge of the 4 corner charges)q2 = -6.5 nC (charge of the center charge)r = 7.8 cm = 0.078 mAfter substituting the values, we get;Electric potential energy = 14.8 N•m = 14.8 JAnswer: 14.8 J.
Learn more about potential energy here,
https://brainly.com/question/1455245
#SPJ11
Over a certain region of space, the electric potential function is V = 5x - 3x²y + 2y z². What is the electric field at the point P, which has coordinates (1,0,2). B. - 1+k A. 61-2k I
The electric field at point P is B. -1 + k. To find the electric field at a given point, we need to take the negative gradient of the electric potential function. The electric field vector is given by:
E = -∇V
Where ∇ is the del operator (gradient operator).
In this case, the electric potential function is V = 5x - 3x²y + 2y z².
To find ∇V, we need to take the partial derivatives of V with respect to each coordinate variable (x, y, and z).
∂V/∂x = 5 - 6xy
∂V/∂y = -3x² + 2z²
∂V/∂z = 4yz
Now, we can evaluate these partial derivatives at the point P(1, 0, 2):
∂V/∂x = 5 - 6(1)(0) = 5
∂V/∂y = -3(1)² + 2(2)² = -3 + 8 = 5
∂V/∂z = 4(0)(2) = 0
Therefore, the electric field vector at point P is:
E = -∇V = -(∂V/∂x)i - (∂V/∂y)j - (∂V/∂z)k = -5i - 5j - 0k = -5(i + j)
So, the magnitude of the electric field is |E| = 5√2 and the direction is in the (-i - j) direction.
Therefore, the electric field at point P is B. -1 + k.
To know more about The electric field
brainly.com/question/30544719
#SPJ11
A 9.2- V battery is connected in series with a 42.mH inductor, a 150−Ω resistor, and an open switch. Part A What is the current in the circuit 0.100 ms after the switch is closed? Express your answer using two significant figures. Part B How much energy is stored in the inductor at this time? Express your answer using two significant figures. Item 10 10 of 15 Each of the current-carrying wires in the figure (Fiqure 1) is long and straight, and carnes the current I elther into or out of the poge, as shown. Figure Part A What is the direction of the net magnetic field produced by these three wires at the center of the triangle? 1. of 1
(a) The current in the circuit 0.100 ms after the switch is closed is approximately 48 mA (milliamperes).
(b) The energy stored in the inductor at this time is approximately 18 μJ (microjoules).
The net magnetic field produced by the three current-carrying wires at the center of an equilateral triangle, where each wire carries a current flowing into the page, will circulate counterclockwise around the center of the triangle.
(a) To find the current in the circuit after the switch is closed, we can use the formula for the current in an RL circuit undergoing exponential decay: I = (V / R) * (1 - e^(-t / τ)),
where V is the battery voltage (9.2 V), R is the resistance (150 Ω), t is the time (0.100 ms = 0.1 × 10^(-3) s), and τ is the time constant of the circuit (τ = L / R, where L is the inductance). Substituting the given values, we can calculate the current to be approximately 48 mA.
(b) The energy stored in an inductor is given by the formula: E = (1/2) * L * I^2, where E is the energy, L is the inductance (42 mH = 42 × 10^(-3) H), and I is the current. Substituting the calculated current value, we can determine the energy stored in the inductor to be approximately 18 μJ.
As for the figure, by applying the right-hand rule, where the fingers of the right hand curl in the direction of the current in each wire, it can be determined that the magnetic field produced by each wire is oriented counterclockwise around the wire. In the given configuration, all three wires carry currents flowing into the page.
As a result, the individual magnetic fields produced by each wire will combine to create a net magnetic field that circulates counterclockwise around the center of the equilateral triangle.
This counterclockwise circulation of the magnetic field is a consequence of the vector summation of the magnetic fields generated by each wire. Thus, the direction of the net magnetic field at the center of the equilateral triangle, when the currents flow into the page, is counterclockwise.
The figure mentioned is:
Learn more about inductor here:
https://brainly.com/question/31503384
#SPJ11
A 6.05-m radius air balloon loaded with passengers and ballast is floating at a fixed altitude. Determine how much weight (ballast) must be dropped overboard to make the balloon rise 116 m in 23.5 s. Assume a constant value of 1.2 kg/m3 for the density of air. Ballast is weight of negligible volume that can be dropped overboard to make the balloon rise.
The calculation of the weight that needs to be dropped is based on the density of air, the radius of the balloon, and the time and distance of the ascent. To make the balloon rise 116 m in 23.5 s, approximately 546 kg of weight (ballast) needs to be dropped overboard.
To determine the amount of weight (ballast) that needs to be dropped overboard, we can use the principle of buoyancy. The buoyant force acting on the balloon is equal to the weight of the air displaced by the balloon.
First, we need to calculate the initial weight of the air displaced by the balloon. The volume of the balloon can be calculated using the formula [tex]V = (4/3)\pi r^3[/tex] , where V represents volume and r represents the radius of the balloon. Substituting the given radius of 6.05 m, we have [tex]V = (4/3)\pi (6.05 )^3[/tex] ≈ 579.2 [tex]m^3[/tex]
The weight of the air displaced can be calculated using the formula W = Vρg, where W represents weight, V represents volume, ρ represents the density of air, and g represents the acceleration due to gravity. Substituting the given density of air ([tex]1.2\ kg/m^3[/tex]) and the acceleration due to gravity (9.8 m/s^2), we have W = ([tex]579.2 \times 1.2 \times 9.8[/tex]) ≈ 6782.2 N.
To make the balloon rise, the buoyant force needs to exceed the initial weight of the balloon. The change in weight required can be calculated using the formula ΔW = mΔg, where ΔW represents the change in weight, m represents the mass, and Δg represents the change in acceleration due to gravity. Since the balloon is already floating at a fixed altitude, the change in acceleration due to gravity is negligible.
Assuming the acceleration due to gravity remains constant, the change in weight is equal to the weight of the ballast to be dropped. Therefore, we have ΔW ≈ 6782.2 N.
To convert the change in weight to mass, we can use the formula W = mg, where m represents mass. Rearranging the equation to solve for m, we have m = W/g. Substituting the change in weight, we have m ≈ [tex]\frac{6782.2}{ 9.8}[/tex] ≈ 693.1 kg. Therefore, approximately 693.1 kg (or 546 kg rounded to the nearest whole number) of weight (ballast) must be dropped overboard to make the balloon rise 116 m in 23.5 s.
Learn more about buoyant force here:
https://brainly.com/question/11884584
#SPJ11
A vector is given by R = 1.95 î+2.30 Ĵ + 2.96 k. (a) Find the magnitudes of the x, y, and z components. X = 1.95 y = 2.30 Z = 2.96 (b) Find the magnitude of R. Your response differs from the correct answer by more than 100%. (c) Find the angle between R and the x axis. X Your response differs from the correct answer by more than 10%. Double check your calculations.º Find the angle between R and they axis. X Your ponse differs significantly from the correct answer. Rework your solution from the beginning and check each step carefully. Find the angle between R and the z axis. X Your response differs significantly from the correct answer. Rework your solution from the beginning and check each step carefully.
a) Magnitudes of x, y, and z components are: X = 1.95, Y = 2.30, and Z = 2.96.b) Magnitude of R is 4.07c) The angle between R and the x-axis is 61.2°d) The angle between R and the y-axis is 56.3°e) The angle between R and the z-axis is 43.7°.
(a) The magnitude of the x-component: X = 1.95 (given)y-component: Y = 2.30 (given) z-component: Z = 2.96 (given)
(b) Magnitude of R:Given, R = 1.95 î+2.30 Ĵ + 2.96 k
Magnitude of R can be calculated as ,|R| = √(x² + y² + z²) = √(1.95² + 2.30² + 2.96²) ≈ 4.07
(c) The angle between R and x-axis: Given, R = 1.95 î+2.30 Ĵ + 2.96 kLet θ be the angle between R and the x-axis.
Then,cosθ = x / |R| = 1.95 / 4.07 ≈ 0.479θ ≈ 61.2°
(d) The angle between R and y-axis: Let θ be the angle between R and the y-axis.
Then,cosθ = y / |R| = 2.30 / 4.07 ≈ 0.564θ ≈ 56.3°
(e) The angle between R and z-axis: Let θ be the angle between R and the z-axis.
Then,cosθ = z / |R| = 2.96 / 4.07 ≈ 0.727θ ≈ 43.7°
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11
On a playground, two kids are sitting on either end of a 1.50 m long teeter totter (a seesaw). The lightweight plank they sit on is supported right at its center. The child on the left end has a mass of 36.4 kg, the child on the right side has a mass of 53.8 kg. If they want the teeter totter to be balanced horizontally, where should they ask their 39.6 kg friend to sit? Include which side and where.
To balance the teeter totter horizontally, the 39.6 kg friend should sit on the left side of the plank, at a distance closer to the center than the child with a mass of 36.4 kg.
In order for the teeter totter to be balanced horizontally, the total torque on both sides of the pivot point must be equal. Torque is calculated by multiplying the force applied by the distance from the pivot point. Since the plank is supported at its center, the torque on one side is equal to the torque on the other side.
Considering the child on the left side with a mass of 36.4 kg, the torque exerted by this child is given by the product of their weight (mg) and the distance from the pivot point. Let's assume this distance is x. Similarly, for the child on the right side with a mass of 53.8 kg, their torque is given by the product of their weight (mg) and the distance from the pivot point, which is (1.5 - x) since it is the remaining distance on the plank.
To balance the teeter totter, the torques must be equal.
Learn more about Torque here:
https://brainly.com/question/30338175
#SPJ11
The period of your simple pendulum on earth is 0.2 s. You found out that the period of your simple pendulum in a certain planet is 0.1 s. What is the acceleration due to gravity on this planet?
The period of a simple pendulum is related to the acceleration due to gravity by the formula:
T = 2π√(L/g)
Where:
T is the period of the pendulum.
L is the length of the pendulum.
g is the acceleration due to gravity.
We can rearrange this equation to solve for g:
g = (4π²L) / T²
Given that the period on Earth is 0.2 s and the period on the other planet is 0.1 s, we can calculate the acceleration due to gravity on the other planet.
Let's assume the length of the pendulum remains constant. Plugging in the values into the equation:
g = (4π²L) / T²
g = (4π²L) / (0.1)²
Since we don't have the specific length of the pendulum, we cannot determine the exact value of the acceleration due to gravity on the other planet. However, you can substitute the known values of length (L) and solve for g using the equation above to find the specific acceleration due to gravity on that planet.
To know more about gravity
brainly.com/question/31321801
#SPJ11
Which of the following are a unit vector? There is more than one, so test each of them. Carry out any math necessary to explain your answer. A. А / A B. î + y C. y +z / √2
D. x + y + z / √3
A unit vector is a vector with a length of 1. A, B, C, and D are unit vectors.
a) A / A
To determine if A / A is a unit vector, we must first determine A. The length of A is the square root of the sum of the squares of its components. If we square the vector A, we obtain:
A² = A · A = A² + B² + C²
= 5² + (-3)² + (-1)²
= 25 + 9 + 1
= 35
A = √35
To normalize A to a unit vector, we must divide it by its length. Thus:
A / A = (5, -3, -1) / √35
The length of this vector is:
√(5² + (-3)² + (-1)²) / √35
= √(35 / 35)
= √1
= 1
Therefore, the vector (5, -3, -1) / √35 is a unit vector.
b) î + y
The length of this vector is:
√(1² + y²)
To normalize this vector, we must divide it by its length. Thus:
î + y / √(1² + y²)
The length of this vector is:
√[1² + (y/√(1² + y²))²]
= √(1 + y² / 1 + y²)
= √1
= 1
Therefore, the vector î + y / √(1² + y²) is a unit vector.
c) y + z / √2
The length of this vector is:
√(y² + (z / √2)²)
To normalize this vector, we must divide it by its length. Thus:
y + z / √2 / √(y² + (z / √2)²)
The length of this vector is:
√[y² + (z / √2)²] / √(y² + (z / √2)²)
= √1
= 1
Therefore, the vector y + z / √2 / √(y² + (z / √2)²) is a unit vector.
d) x + y + z / √3
The length of this vector is:
√(x² + y² + (z / √3)²)
To normalize this vector, we must divide it by its length. Thus:
x + y + z / √3 / √(x² + y² + (z / √3)²)
The length of this vector is:
√[x² + y² + (z / √3)²] / √(x² + y² + (z / √3)²)
= √1
= 1
Therefore, the vector x + y + z / √3 / √(x² + y² + (z / √3)²) is a unit vector.
Answer: A, B, C, and D are unit vectors.
Learn more about unit vectors: https://brainly.com/question/28028700
#SPJ11
Propose a two-dimensional, transient velocity field and find the general equations for the
trajectory, for the current line and for the emission line (no need to plot the graphs,
display only the equations). Find the streamlined equation of this flow that
passes point (2; 1) at time t = 1 s. Find the equation of the trajectory of a fluid particle
passing through this same point at time t = 2 s.
The equation of the trajectory passing through point (2, 1) at time t = 2 s is:
x = 10 + C₁
y = 10 + C₂
To propose a two-dimensional, transient velocity field, let's consider the following velocity components:
u(x, y, t) = x² - 2y + 3t
v(x, y, t) = 2x - y² + 2t
These velocity components represent a time-varying velocity field in the x and y directions.
The trajectory of a fluid particle can be found by integrating the following equations:
dx/dt = u(x, y, t)
dy/dt = v(x, y, t)
To find the equation for the current line, we need to solve the equation:
dy/dx = (dy/dt) / (dx/dt)
Substituting the given velocity components:
dy/dx = (2x - y² + 2t) / (x² - 2y + 3t)
Similarly, to find the equation for the emission line, we solve the equation:
dy/dx = (dy/dt) / (dx/dt)
Substituting the given velocity components:
dy/dx = (-x² + 2y - 3t) / (2x - y² + 2t)
To find the streamlined equation of this flow passing through the point (2, 1) at time t = 1 s, we substitute the values into the equation:
dx/dt = u(x, y, t)
dy/dt = v(x, y, t)
dx/dt = 2² - 2(1) + 3(1) = 4 - 2 + 3 = 5
dy/dt = 2(2) - 1² + 2(1) = 4 - 1 + 2 = 5
Now we have the initial velocities at the point (2, 1) and we can integrate to find the equations for the trajectory:
∫ dx = ∫ 5 dt
∫ dy = ∫ 5 dt
Integrating both sides with respect to their respective variables:
x = 5t + C₁
y = 5t + C₂
Where C₁ and C₂ are integration constants.
Therefore, the equation of the trajectory passing through point (2, 1) at time t = 1 s is:
x = 5t + C₁
y = 5t + C₂
To find the equation of the trajectory passing through the same point (2, 1) at time t = 2 s, we substitute the values into the equation:
x = 5(2) + C1 = 10 + C₁
y = 5(2) + C₂ = 10 + C₂
Therefore, the equation of the trajectory passing through point (2, 1) at time t = 2 s is:
x = 10 + C₁
y = 10 + C₂
Learn more about transient velocity field on:
https://brainly.com/question/30549442
#SPJ11
Fig. 6. Total mechanical energy (TE=KE+PE) of the ball. The solid curve represents the prediction of our model.
When the ball loses mechanical energy to friction, the mechanical energy decreases accordingly. The graph shows that the mechanical energy of the ball gradually decreases to zero, as expected.
The total mechanical energy of the ball in motion. The solid curve represents the prediction of a model. Total mechanical energy is equal to the sum of kinetic energy (KE) and potential energy (PE).
The energy of the ball decreases due to friction as it travels from left to right. Since the ball is not acted upon by any external force, the total mechanical energy of the ball remains constant.
The graph shows that the potential energy of the ball decreases as the kinetic energy increases. When the ball reaches the maximum height, it has maximum potential energy and minimum kinetic energy.
Conversely, when the ball reaches the bottom of the track, it has minimum potential energy and maximum kinetic energy. When the ball loses mechanical energy to friction, the mechanical energy decreases accordingly.
This is evident in the graph as the curve drops downward. In the absence of any other forces, the ball would continue to roll indefinitely.
However, the graph shows that the mechanical energy of the ball gradually decreases to zero, as expected.
Learn more about mechanical energy here:
https://brainly.com/question/29408366
#SPJ11
A 230 000 V-rms power line carries an average power PAV = 25 MW over a distance of 100 km. If the total resistance of the wires is 10 ohms, what is the resistive power loss?
A.
12 kW
B.
2.5 MW
C.
1.0 MW
D.
12 MW
E.
3.4 MW
The correct option is B. The resistive power loss in the power line is 2.5 MW. The resistive power loss in a power line is calculated using the formula [tex]P_l{oss} = I^2 * R[/tex].
The resistive power formula is [tex]P_l{oss} = I^2 * R[/tex], where[tex]P_{loss}[/tex] is the power loss, I is the current flowing through the wires, and R is the resistance. For determining the current, the formula used is:
[tex]PAV = I^2 * R[/tex],
where PAV is the average power and solves for I.
Rearranging the formula,
[tex]I = \sqrt(PAV / R).[/tex]
Substituting the given values, [tex]I = \sqrt(25 MW / 10 ohms) = \sqrt(2.5 MW) = 1.58 kA[/tex] (kiloamperes).
Now, calculate the resistive power loss by substituting the values into the formula:
[tex]P_{loss} = I^2 * R. P_{loss} = (1.58 kA)^2 * 10 ohms = 2.5 MW[/tex].
Therefore, the resistive power loss in the power line is 2.5 MW.
Hence, the correct option is B.
Learn more about current here:
https://brainly.com/question/2285102
#SPJ11
Consider the following:
A parallel-plate capacitor consists of two identical, parallel, conducting plates each with an area of 4.00 cm2 and uniform charges of ±5.00 nC. The plates are separated by a perpendicular distance of 1.50 mm
What is the potential difference across the metallic plates?
The potential difference across the metallic plates is 5.00 mV.
Given data:Area of each plate, A = 4.00 cm² = 4.00 × 10⁻⁴ m²Distance between the plates, d = 1.50 mm = 1.50 × 10⁻³ mMagnitude of each charge, q = 5.00 nC = 5.00 × 10⁻⁹ CVoltage or potential difference across the metallic plates =
Formula used: The formula to calculate the capacitance of a parallel-plate capacitor is,C = (ϵ₀A) / dWhere, C is the capacitance,ϵ₀ is the permittivity of free space = 8.85 × 10⁻¹² F/mA is the area of each plate andd is the distance between the plates
Calculation:The capacitance of the parallel-plate capacitor is given by,C = (ϵ₀A) / d= (8.85 × 10⁻¹² F/m) × (4.00 × 10⁻⁴ m²) / (1.50 × 10⁻³ m)= 23.52 pF= 23.52 × 10⁻¹² FThe charge on each plate of the capacitor is given by,Q = CV.
Where, V is the potential difference across the plates.Therefore, the charge on each plate of the capacitor is given by,Q = CV= (23.52 × 10⁻¹² F) × (5.00 × 10⁻⁹ C)= 0.1176 × 10⁻¹² CThe potential difference across the plates is given by,V = Q / C= (0.1176 × 10⁻¹² C) / (23.52 × 10⁻¹² F)= 0.005 V or 5.00 mV.
Therefore, the potential difference across the metallic plates is 5.00 mV.
Learn more about Magnitude here,
https://brainly.com/question/30337362
#SPJ11
An electric field of 160000 N/C points due west at a certain spot. What is the magnitude of the force that acts on a charge of -9.1 µC at this spot? Number i Units N A small object has a mass of 2.0 × 10-³ kg and a charge of -26 µC. It is placed at a certain spot where there is an electric field. When released, the object experiences an acceleration of 2.8 × 10³ m/s² in the direction of the +x axis. Determine the electric field, includin sign, relative to the +x axis.
The magnitude of the force acting on a charge in an electric field can be determined using equation F = q * E. For a charge of -9.1 µC in an electric field of 160000 N/C, the magnitude of force can be calculated as 1.46 N.
To find the magnitude of the force acting on a charge of -9.1 µC in an electric field of 160000 N/C, we can use the equation F = q * E. Substituting the given values, we have F = (-9.1 µC) * (160000 N/C).
To perform the calculation, we first need to convert the charge from microcoulombs (µC) to coulombs (C) by multiplying it by the conversion factor 10^-6. Thus, -9.1 µC is equal to -9.1 x 10^-6 C.
By substituting the values into the equation, we can calculate the magnitude of the force. F = (-9.1 x 10^-6 C) * (160000 N/C) = -1.46 N.
Therefore, the magnitude of the force acting on the charge of -9.1 µC in the electric field of 160000 N/C is 1.46 N.
Learn more about magnitude here;
https://brainly.com/question/30337362
#SPJ11
Mr. P has a mass of 62 kg. He steps off a 66.3 cm high wall and drops to the ground below. If he bends his knees as he lands so that the time during which he stops his downward motion is 0.23 s, what is the average force (in N) that the ground exerts on Mr. P?
Round your final answer to the nearest integer value. If there is no solution or if the solution cannot be found with the information provided, give your answer as: -1000
The average force that the ground exerts on Mr. P is 607 N (rounded to the nearest integer).Hence, the required answer is 607 N.
In order to calculate the average force that the ground exerts on Mr. P, we will use the formula:F = (m × g) + (m × (v f − v i) / Δt)Here, m = 62 kg, g = 9.8 m/s² (acceleration due to gravity), v i = 0 m/s (initial velocity), v f = 0 m/s (final velocity), Δt = 0.23 s, and the distance fallen is h = 66.3 cm = 0.663 m. We can first calculate the velocity with which Mr. P hits the ground:vf = √(2gh)where, h is the height from where the object is dropped.
Therefore, vf = √(2 × 9.8 × 0.663) = 3.191 m/s.Now, we can substitute the given values into the formula for force:F = (m × g) + (m × (v f − v i) / Δt)F = (62 × 9.8) + (62 × (0 − 0) / 0.23)F = 607.6 NTherefore, the average force that the ground exerts on Mr. P is 607 N (rounded to the nearest integer).Hence, the required answer is 607 N.
Learn more about average force here,
https://brainly.com/question/18652903
#SPJ11
A daredevil is shot out of a cannon at 32.0° to the horizontal with an initial speed of 26.8 m/s. A net is positioned at a horizontal dis- tance of 37.7 m from the cannon from which the daredevil is shot. The acceleration of gravity is 9.81 m/s². At what height above the cannon's mouth should the net be placed in order to catch the daredevil? Answer in units of m. m Answer in units of m
The height above the cannon's mouth where the net should be placed is approximately 47693.6232 meters.
To find the height above the cannon's mouth where the net should be placed, we need to analyze the vertical motion of the daredevil.
We can use the equations of motion to solve for the desired height.
Given:
Initial velocity (vi) = 26.8 m/s
Launch angle (θ) = 32.0°
Horizontal distance (d) = 37.7 m
Acceleration due to gravity (g) = 9.81 m/s²
First, we need to determine the time it takes for the daredevil to reach the horizontal distance of 37.7 m.
We can use the horizontal component of the velocity (vix) and the horizontal distance traveled (d) to calculate the time (t):
d = vix * t
Since the horizontal velocity is constant and equal to the initial velocity multiplied by the cosine of the launch angle (θ), we have:
vix = vi * cos(θ)
Substituting the given values:
d = (26.8 m/s) * cos(32.0°) * t
Solving for t:
t = d / (vi * cos(θ))
Next, we can determine the height (h) above the cannon's mouth where the net should be placed. We'll use the vertical motion equation:
h = viy * t + (1/2) * g * t²
where viy is the vertical component of the initial velocity (viy = vi * sin(θ)).
Substituting the given values:
h = (26.8 m/s) * sin(32.0°) * t + (1/2) * (9.81 m/s²) * t²
Now we can substitute the value of t we found earlier:
h = (26.8 m/s) * sin(32.0°) * (d / (vi * cos(θ))) + (1/2) * (9.81 m/s²) * (d / (vi * cos(θ)))²
To simplify the expression for the height above the cannon's mouth, we can substitute the given values and simplify the equation.
First, let's calculate the values for the trigonometric functions:
sin(32.0°) ≈ 0.5299
cos(32.0°) ≈ 0.8480
Substituting these values into the equation:
h = (26.8 m/s) * (0.5299) * (37.7 m) / (26.8 m/s * 0.8480) + (1/2) * (9.81 m/s²) * (37.7 m / (26.8 m/s * 0.8480))²
Simplifying further:
h = 0.5299 * 37.7 m + (1/2) * (9.81 m/s²) * (37.7 m / 0.8480)²
h = 19.98 m + (1/2) * (9.81 m/s²) * (44.46 m)²
h = 19.98 m + 4.905 m/s² * 44.46 m²
h = 19.98 m + 4.905 m/s² * 1980.0516 m²
h ≈ 19.98 m + 4.905 * 9737.5197 m
h ≈ 19.98 m + 47673.6432 m
h ≈ 47693.6232 m
Therefore, the height above the cannon's mouth where the net should be placed is approximately 47693.6232 meters.
Learn more about equations of motion here:
https://brainly.com/question/29278163
#SPJ11
(a) Sketch the relation between equivalent widths measured in a spectrum and the number of absorbing atoms. What is this relation called and what are the three main regimes and the physical explanation for these variations in the relation (2 points
The relation between equivalent widths measured in a spectrum and the number of absorbing atoms is known as the curve of growth. It exhibits three main regimes- linear regime, damping regime, and saturated regime.
The curve of growth describes the relationship between the equivalent widths measured in a spectrum and the number of absorbing atoms. It is a fundamental concept in spectroscopy. The curve of growth can be divided into three main regimes: the linear regime, the saturated regime, and the damping regime.
In the linear regime, the equivalent width of the spectral line is directly proportional to the number of absorbing atoms. As more absorbing atoms are added, the equivalent width increases linearly. In the saturated regime, adding more absorbing atoms does not result in a significant increase in the equivalent width. At this point, the spectral line becomes saturated, and the equivalent width plateaus.
In the damping regime, adding more absorbing atoms causes the equivalent width to decrease. This occurs because the line broadens due to collisions between the absorbing atoms. As the line broadens, the overall strength of the absorption decreases, resulting in a smaller equivalent width.
Understanding the curve of growth and its regimes is crucial for analyzing spectral data and determining the number of absorbing atoms in a system. By studying these variations, scientists can gain valuable insights into the physical properties of the absorbing medium.
Learn more about spectrum here:
https://brainly.com/question/31059971
#SPJ11
) Fourier Transform of Signals a) Obtain the Fourier Transform of the signal: x(t) = e-alt where "a" is a positive real number. (4 Marks) b) Obtain the Fourier Transform of the signal: x(t) = 8(t) + sin(wot) + 3. Where 8(t) is a unit impulse function.
The Fourier Transform of the given signal is 8(ω) + (1/2j) [δ(w-w0) - δ(w+w0)] + 3δ(w) is the answer. The notation used here assumes a two-sided Fourier Transform, where the frequencies can be positive or negative.
a) Obtain the Fourier Transform of the signal x(t) = e^-at where "a" is a positive real number. A Fourier Transform is defined as the mathematical technique that decomposes a time-domain signal into its corresponding frequency-domain spectrum.
The Fourier Transform of the signal x(t) = e^-at is as follows:
X(ω) = ∫e^(-at) e^(-jωt) dt 0 ∞
= ∫e^(-(a+jω)t) dt 0 ∞
= -1/(a+jω) [-e^(-(a+jω)t)]∣∣0∞
= 1/(a+jω),
Re{a+jω}>0.
b) Obtain the Fourier Transform of the signal x(t) = 8(t) + sin(wot) + 3.
Where 8(t) is a unit impulse function.
The Fourier transform of x(t) is given as
X(ω) = F[x(t)]
= F[8(t)] + F[sin(wot)] + F[3]
= 8(ω) + (1/2j) [δ(w-w0) - δ(w+w0)] + 3δ(w).
Hence, the Fourier Transform of the given signal is 8(ω) + (1/2j) [δ(w-w0) - δ(w+w0)] + 3δ(w).
Please note that the notation used here assumes a two-sided Fourier Transform, where the frequencies can be positive or negative. If you are working with a one-sided Fourier Transform, you may need to adjust the representation accordingly.
know more about Fourier Transform
https://brainly.com/question/1542972
#SPJ11
The circuit shown below includes a battery of EMF = 5.424 V, a resistor with R = 0.5621 ΩΩ , and an inductor with L = 5.841 H. If the switch S has been in position a for a very long time and is then flipped to position b, what is the current in the inductor at t = 2.318 s ?
The current in the inductor at t = 2.318 s after the switch is flipped to position b is approximately 52.758 amperes (A).
To determine the current in the inductor at t = 2.318 s after the switch is flipped to position b, we can use the formula for the current in an RL circuit with a battery:
I(t) = (ε/R) * (1 - e^(-Rt/L))
Where:
I(t) is the current at time t,
ε is the EMF of the battery,
R is the resistance,
L is the inductance, and
e is the base of the natural logarithm.
Given that ε = 5.424 V, R = 0.5621 Ω, L = 5.841 H, and t = 2.318 s, we can substitute these values into the formula:
I(t) = (5.424 V / 0.5621 Ω) * (1 - e^(-0.5621 Ω * 2.318 s / 5.841 H))
Calculating the exponent:
e^(-0.5621 Ω * 2.318 s / 5.841 H) ≈ 0.501
Substituting the values into the equation:
I(t) ≈ (5.424 V / 0.5621 Ω) * (1 - 0.501)
I(t) ≈ 52.758 A
Therefore, the current in the inductor at t = 2.318 s after the switch is flipped to position b is approximately 52.758 amperes (A).
Learn more about current
https://brainly.com/question/31853499
#SPJ11