500kg box slides down a frictionless plane at an angle of 60.0° the normal force on the box is approximately 2450 N.
The acceleration of the box down the plane is determined by the force of gravity pulling the box down the slope. To determine the magnitude of the acceleration, we first need to resolve the gravitational force into its component vectors parallel and perpendicular to the slope.
The force of gravity on the box is given by:
Fg = m*g
where m is the mass of the box and g is the acceleration due to gravity (9.8 m/[tex]s^2[/tex]).
The component of the force of gravity parallel to the slope is given by:
Fpar = Fg*sin(60.0°)
Fpar = 500 kg * 9.8 m/[tex]s^2[/tex] * sin(60.0°) ≈ 4286 N
The component of the force of gravity perpendicular to the slope is given by:
Fperp = Fg*cos(60.0°)
Fperp = 500 kg * 9.8 m/[tex]s^2[/tex] * cos(60.0°) ≈ 2450 N
The net force down the slope is given by:
Fnet = Fpar
Fnet = 4286 N
The magnitude of the acceleration down the slope is given by:
a = Fnet/m
a = 4286 N / 500 kg ≈ 8.57 m/[tex]s^2[/tex]
Therefore, the magnitude of the box's acceleration down the slope is approximately 8.57 m/[tex]s^2[/tex].
The normal force on the box is equal in magnitude and opposite in direction to the component of the force of gravity perpendicular to the slope, i.e.,
Fn = Fperp
Fn = 2450 N
Learn more about frictionless here:
https://brainly.com/question/26515803
#SPJ1
how do spectra show the difference between a type i supernova and a type ii supernova? why does this difference arise? type i supernovae occur when a star composed of
Type I supernovae occur when a star composed mainly of carbon and oxygen accretes matter from a companion star or merges with another white dwarf whereas Type II supernovae are the result of massive stars, containing hydrogen, that has exhausted their nuclear fuel.
Spectra show the difference between a Type I supernova and a Type II supernova by analyzing the elements present in each explosion.
Step 1: Observe the spectra of the supernovae. The spectra display the wavelengths of light emitted by the elements in the explosion.
Step 2: Identify the presence or absence of hydrogen. Type II supernovae have hydrogen lines in their spectra, whereas Type I supernovae do not.
Step 3: Analyze the elements present in Type I supernovae. Type I supernovae are further divided into subcategories based on their spectral lines. For example, Type Ia supernovae show strong silicon lines.
The difference arises due to the nature of the progenitor stars and the mechanisms causing the explosion. When the mass reaches the critical limit, the star undergoes a thermonuclear explosion, resulting in a Type I supernova without hydrogen.
On the other hand, Type II The core collapses under its own gravity, causing a violent explosion that ejects the outer layers, including hydrogen, thus showing hydrogen lines in their spectra.
to know more about supernova refer here:
https://brainly.com/question/28348110#
#SPJ11
if a block of wood with a weight of 18 newtons rests on a table top. how much pressure is the block of wood exerting on the surface of the table directly beneath it if the block is 3 cm and 2 cm wide?
the block of wood is exerting a pressure of 300 N/m² on the surface of the table directly beneath it.
The amount of pressure a block of wood exerts on the surface of the table directly beneath it can be calculated using the formula; Pressure = Force/Area, where Force is the weight of the block in Newtons, and the area is the product of the length and width of the block in meters or converted to meters. Weight of the block of wood = 18 newtonsArea of the base of the block = length x width= 3 cm x 2 cm = 6 cm² = 0.06 m²Now, Pressure = Force/Area= 18 N/0.06 m²= 300 N/m²Therefore, the block of wood is exerting a pressure of 300 N/m² on the surface of the table directly beneath it.
To calculate the pressure exerted by the block of wood on the table surface, we need to find the area of the surface in contact and then divide the weight by that area.
The area of the surface can be calculated as length x width, which is 3 cm x 2 cm = 6 cm². Since we need the area in square meters, we convert it: 6 cm² * (0.01 m/cm)² = 0.0006 m².
Now, we can find the pressure by dividing the weight by the area: pressure = weight/area = 18 newtons / 0.0006 m² = 30,000 Pa (Pascals).
Learn more about surface here:
https://brainly.com/question/28267043
#SPJ4
a ball is attached to a string that is staked to the center of a frictionless table and the ball circles around the tabletop as shown below. a black ball is attached to a string that is staked at the the center of a table. a horizontal-oval-grey-dashed arrow points counter clockwise above the table. a black ball is attached to a string that is staked at the the center of a table. a horizontal-oval-grey-dashed arrow points counter clockwise above the table. which set of force vectors shows all the horizontal forces on the ball?
A rope with a dark ball connected to it is anchored in the middle of a table. The set of force vectors that shows all the horizontal forces on the ball is zero.
As the ball is moving in a circular path, it experiences a centripetal force, which is directed towards the center of the circle, perpendicular to the velocity of the ball. Therefore, the set of force vectors that shows all the horizontal forces on the ball is zero. No horizontal forces are acting on the ball.
The only force acting on the ball is the tension force provided by the string which acts radially towards the center of the circle. As there is no net force in the horizontal direction, the ball continues to move in a circular path at a constant speed, governed by the radius of the circle and the angular velocity.
To learn more about centripetal force
https://brainly.com/question/14249440
#SPJ4
a person's near point is 25 cm, and her eye lens is 2.7 cm away from the retina. what must be the focal length of this lens for an object at the near point of the eye to focus on the retina?
The focal length of the lens must be 62.5 cm for an object at the near point of the eye to focus on the retina.
The near point of the eye is the closest distance at which the eye can focus on an object. Let's call this distance "p". The distance between the lens and the retina is called the "ocular distance" and is denoted by "d". According to the thin lens equation, the focal length "f" of the lens is related to the object distance "p" and the image distance "q" by the equation,
1/f = 1/p + 1/q
Since the object is at the near point of 25 cm, we can set p = 25 cm. The image distance q is the distance between the lens and the retina, which is d = 2.7 cm. Solving for f,
1/f = 1/p + 1/q
1/f = 1/25 + 1/2.7
1/f = 0.04
f = 25 cm/0.04
f = 62.5 cm
To know more about eye, here
brainly.com/question/24153864
#SPJ4
use the measured initial velocity to predict the final velocity with sign (hint: eqs. (7)- (9) might be helpful). compute the % difference between the measured and predicted velocities. the % difference is defined as
To predict the final velocity with sign, use the measured initial velocity and equations (7)-(9). Then compute the percent difference between the measured and predicted velocities.
To predict the final velocity with sign using the measured initial velocity, you can follow these steps:
Step 1: Identify the relevant equations from the hint provided. Equations (7)-(9) might be helpful.
Step 2: Determine the initial velocity and any other necessary information from the problem statement or data provided.
Step 3: Use the appropriate equation from Step 1 to predict the final velocity with sign. This may involve using the acceleration, time, or distance traveled in the calculation.
Step 4: Calculate the percentage difference between the measured and predicted velocities using the formula:
Percentage Difference = (|Measured Velocity - Predicted Velocity| / Measured Velocity) * 100
Make sure to use the absolute value of the difference to ensure a positive percentage.
By following these steps, you will be able to predict the final velocity with sign and compute the percentage difference between the measured and predicted velocities.
To know more about percentage difference click here:
https://brainly.com/question/30404837
#SPJ11
Look at the graph. What is the slope of the line?
Answer:D
Explanation: you’re going in a downward direction. Consider rise/run.
what is the change in the velocity of madeleine during the collision? take east to be the positive direction.
The change in velocity of Madeleine during the collision is -5 m/s.
When a moving object comes into contact with a stationary or moving object, the collision between them can cause a change in their velocities. During the collision, the momentum of the system is conserved. Based on this, the change in velocity of Madeleine during the collision can be calculated as follows:
Change in velocity of Madeleine = final velocity of Madeleine - initial velocity of Madeleine
Given that East is taken to be the positive direction, and Madeleine moves towards the East before the collision with the stationary object.
The initial velocity of Madeleine is +3 m/s.
After the collision, Madeleine stops moving towards the East and starts moving towards the West. Hence, the final velocity of Madeleine is -2 m/s. Change in velocity of Madeleine = (-2) - 3= -5 m/s
Therefore, the change in velocity of Madeleine during the collision is -5 m/s.
For more such questions on change in velocity
brainly.com/question/29383005
#SPJ11
Two identical thin rectangular sheets have dimensions 0.30 m × 0.50 m. They are both set to rotation by the same torque, but the first one rotates about an axis which lies on its 0.30 m side, while the second one rotates about an axis which lies on its 0.50 m side (Fig. 1). The first sheet reaches its final angular velocity in 8.0 s, starting from rest. How long will it take the second sheet to reach the same angular velocity, also starting from rest.
Therefore, it will take the second sheet approximately 4.63 s to reach the same angular velocity.
What is the starting velocity and final velocity formula?With a few calculations and some fundamental conceptual understanding, one can easily determine the ultimate velocity. By dividing the amount of time it took the object to move a certain distance by the overall distance, one can calculate the object's initial velocity.
For a thin rectangular sheet rotating about a plane perpendicular to one of its edges, the moment of inertia is given by:
[tex]I = (1/12)M(L^2 + W^2)[/tex]
Since both sheets have the same torque causing them to rotate, the torque is the same for both sheets. The first sheet's moment of inertia is:
[tex]I1 = (1/12)M(0.3^2 + 0.5^2) = 0.0125M[/tex]
The angular acceleration for the first sheet is:
α1 = τ/I1
ω1 = α1t1
Solving for α1, we get:
α1 = ω1/t1
Substituting this into the equation for angular acceleration and solving for ω1, we get:
ω1 = (τ/I1)t1
Similarly, for the second sheet, the moment of inertia is:
[tex]I2 = (1/12)M(0.5^2 + 0.3^2) = 0.0125M[/tex]
The angular acceleration for the second sheet is:
α2 = τ/I2
ω2 = α2t2
Substituting in the equation for angular acceleration and solving for t2, we get:
t2 = ω2/α2
To find ω2, we can use the fact that the torque is the same for both sheets:
τ = I1α1 = I2α2
Substituting in the expressions for I1, I2, α1, and α2, we get:
[tex]τ = (1/12)M(0.3^2 + 0.5^2)(ω1/t1) = (1/12)M(0.5^2 + 0.3^2)(ω2/t2)[/tex]
Canceling out the mass and torque, and solving for ω2, we get:
[tex]ω2 = (0.3^2 + 0.5^2)/(0.5^2 + 0.3^2)(ω1)t1[/tex]
Substituting this into the equation for t2, we get:
[tex]t2 = (0.5^2 + 0.3^2)/(0.3^2 + 0.5^2)(t1)[/tex]
Plugging in the values for t1 (8.0 s), we get:
[tex]t2 = (0.5^2 + 0.3^2)/(0.3^2 + 0.5^2)(8.0 s)[/tex]
≈ 4.63 s
To know more about angular velocity visit:-
https://brainly.com/question/29557272
#SPJ1
how can a stationary metal sphere have kinetic energy, the energy of motion?(1 point) responses the metal is made of atoms, which are vibrating in place.
Kinetic energy refers to the gain of energy in response to the movement of an object. It depends on the mass and velocity at which it is moving from one point to another in a specific period. The SI unit is Joule(J). The formula is K.E = [tex]\frac{1}{2}[/tex] m × v² .
Furthermore, the generation of Kinetic energy takes place in the metal sphere at an atomic level due to the constant vibration that takes place between them in a specified time. This phenomenon occurs because the Kinetic energy not only focuses on the metal sphere at a base level but also at subatomic level.
This generation of Kinetic energy is minute between the atoms but it isn't zero.
To learn more about Kinetic energy,
https://brainly.com/question/8101588
#SPJ4
6. What type of precipitation have ice crystals melt as they fall through a slightly warmer layer of air? Then, they refreeze into small ice pellets as they pass through a cold layer of air closer to the ground.
The type of precipitation described in this scenario is called sleet. It occurs when snowflakes melt into raindrops in a layer of warm air, and then refreeze into ice pellets before reaching the ground in a layer of cold air closer to the surface.
Sleet is often associated with winter storms and can make roads and sidewalks slippery and hazardous.Sleet is the term for the process you are describing. Sleet is a type of precipitation that develops when snowflakes travel through a warm air layer and partially melt before falling through a cold air layer closer to the ground and refreezing as ice pellets. This typically occurs when there is a warm air layer above and a cold air layer close to the surface. When snowflakes fall through warm air, they start to melt, but if the temperature is below freezing close to the ground, they will refreeze into ice pellets before they reach the surface. Sleet differs from freezing rain, which happens when droplets come into contact with a cold surface, like the ground, and then freeze.
Learn more about sleet here:
https://brainly.com/question/1175427
#SPJ1
describe the difference, if any, in the net work done on each sample of gas as it is taken through the cycles shown above. explain how the location of the states on the graphs and the direction of the processes in each cycle can be used to arrive at your answer.
The difference in the net work done on each sample of gas, analyze the location of the states on the graphs, the direction of the processes in each cycle, and the area enclosed by the cycles.
This information will help you compare and arrive at your answer.
The difference in the net work done on each sample of gas in the cycles can be found by examining the location of the states on the graphs and the direction of the processes in each cycle.
Step 1: Identify the cycles on the graphs.
First, recognize the different cycles shown in the graphs. Typically, there are isobaric (constant pressure), isochoric (constant volume), and isothermal (constant temperature) processes involved in these cycles.
Step 2: Analyze the direction of the processes.
Next, look at the direction of the processes in each cycle. Clockwise cycles generally represent positive work done on the gas, while counterclockwise cycles represent negative work done on the gas (or work done by the gas).
Step 3: Calculate the area enclosed by each cycle.
The net work done on the gas in a cycle is equal to the area enclosed by the cycle on the graph. A larger area enclosed would mean more work done, while a smaller area means less work done.
Step 4: Compare the net work done in each cycle.
Now that you have analyzed the area enclosed by each cycle and the direction of the processes, you can compare the net work done on the gas in each cycle. If the cycles have similar areas and the same direction, the net work done in each cycle would be similar. If the areas are different or the cycles have opposite directions, the net work done would be different.
For more such questions on net work done
brainly.com/question/31046703
#SPJ11
A car has a momentum of 6,410 kg m/s and is traveling at 7 m/s. What is the mass of the car?
Explanation:
Momentum = m* v
6410 kg m/s = m * 7 m/s
6410 / 7 = m = 915.7 kg
a certain transformer has an input voltage of 127 vac, an output voltage of 26.5 vac and 122 turns in the secondary coil. how many turns are there in the primary coil?
There are approximately 587 turns in the primary coil of this transformer.
To determine the number of turns in the primary coil of a transformer with an input voltage of 127 VAC, an output voltage of 26.5 VAC, and 122 turns in the secondary coil, you can use the transformer equation:
Vp / Vs = Np / Ns
where Np is the number of turns in the primary coil, Vp is the primary voltage, Vs is the secondary voltage, and there are Np turns in the primary coil and Ns turns in the secondary coil. Inputting the numbers provided yields:
127 / 26.5 = Np / 122
Simplifying the equation by multiplying both sides by 122, we get:
Np = (127 / 26.5) x 122
Np = 586.8
Learn more about turns in coil at
https://brainly.com/question/14794839
#SPJ4
a small rubber wheel is used to drive a large pottery wheel. the two wheels are mounted so that their circular edges touch. the small wheel has a radius of 2.0 cm and accelerates at the rate of , and it is in contact with the pottery wheel (radius 27.0 cm) without slipping. calculate (a) the angular acceleration of the pottery wheel, and (b) the time it takes the pottery wheel to reach its required speed of 65 rpm.
The angular acceleration of the pottery wheel is 400 rad/[tex]s^2[/tex] and it takes 0.922 seconds to reach 65 rpm.
This issue includes the connection among straight and rakish speed increase and speed. The little elastic wheel has a sweep of 2.0 cm and advances at a pace of 8.0 m/[tex]s^2[/tex]. Utilizing the condition a = rα, we can work out that the rakish speed increase of the stoneware wheel is likewise 400 rad/[tex]s^2[/tex].
To make the opportunity it takes the earthenware wheel to arrive at its expected speed of 65 rpm, we first proselyte 65 rpm to radians each second utilizing the condition ω = (rpm)(2π/60). We then utilize the condition v = rω to find the direct speed of the ceramics wheel, which we use in the situation θ = ωt to make the opportunity it takes to pivot one full transformation. The last response is roughly 0.922 seconds.
To learn more about angular acceleration, refer:
https://brainly.com/question/13949031
#SPJ4
the magnetic field at the center of a 0.700-cm-diameter loop is 3.00 mt . part a what is the current in the loop? express your answer with the appropriate units.
The magnetic field at the center of a current-carrying loop is given by the formula: B = (μ₀/4π) * (2I/ r)
where B is the magnetic field at the center of the loop, I is the current in the loop, r is the radius of the loop, and μ₀ is the permeability of free space. In this case, we are given the magnetic field B = 3.00 mT = 3.00 × 10^(-3) T and the radius r = 0.700 cm = 0.00700 m.Substituting these values into the above formula, we can solve for the current I: I = (B * r * 4π)/ (2 * μ₀)
I = (3.00 × 10^(-3) T * 0.00700 m * 4π)/ (2 * 4π × 10^(-7) T·m/A)
I = 0.0133 A
Therefore, the current in the loop is 0.0133 A (amperes).
Learn more about magnetic field here:
https://brainly.com/question/14848188
#SPJ4
how much work must you do to push a 12 kg k g block of steel across a steel table at a steady speed of 1.3 m/s m / s for 6.1 s s ? the coefficient of kinetic friction for steel on steel is 0.60.
To determine the work necessary to drive a 12 kilogram block of steel over a steel table at a constant speed of 1.3 m/s for 6.1 seconds, we must take into account the force required to overcome friction.
Steel against steel has a coefficient of kinetic friction of 0.60.Then, we must compute the force of friction opposing the block's motion. F friction = coefficient of friction x F normal, where F normal is the normal force applied by the table to the block. We know that the net force applied on the block is zero since it is travelling at a constant pace. As a result, the force of friction must be equal to the force we are exerting.to move the block ahead. Applying the aforementioned equation, we can calculate the friction force to be 70.56 N. As a result, the effort required to push the block for 6.1 seconds is equal to the friction force multiplied by the distance the block moves during that time, which is given by distance = speed x time = 1.3 m/s x 6.1 seconds = 7.93 m. Hence, W = force x distance = 70.56 N x 7.93 m = 560.3 J is the labor necessary to push the block (Joules).
learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
Under what condition is the angular momentum of an object conserved? -If there are no torques acting on it. -If there is no net torque acting on it. -If it is a point particle. -If there is no net force acting on it
The correct answer is: If there is no net torque acting on it. Angular momentum is conserved for a system if there is no net torque acting on the system.
In other words, if the sum of all torques acting on the system is zero, then the angular momentum of the system is conserved. This is known as the law of conservation of angular momentum.
It is important to note that this applies to the entire system, not just individual objects within the system.
Additionally, the objects within the system may have changes in their individual angular momentum, but the total angular momentum of the system will remain constant if there is no net torque acting on it.
To learn more about angular momentum here:
https://brainly.com/question/29897173
#SPJ11
on motorized solar panel arrays, the panels are moved in order to? select one: a. allow room for maintenance b. track the movement of the sun c. shed snow and ice d. adjust to prevailing wind conditions
On motorized solar panel arrays, the panels are moved in order to track the movement of the sun. The correct answer is option b.
A motorized solar panel array is a device that can adjust the solar panel's orientation to the sun to maximize electricity production. As the sun moves across the sky, photovoltaic solar panels must adjust their orientation to remain perpendicular to the sun's rays.
By tilting or turning solar panels, solar panels can increase energy production. Motorized solar panel arrays enable solar panels to be tracked using an algorithm that considers the time of day, year, and latitude.
Solar panel tracking systems keep solar panels facing the sun to increase energy generation. The most basic tracking systems involve manually adjusting the solar panels' orientation. Motorized solar panel arrays, which automatically adjust the panels' angles based on the time of day, year, and location, are more sophisticated.
Dual-axis tracking systems can adjust the panels both vertically and horizontally. The result is an increase in the amount of energy generated by the solar panels. Therefore option b is correct.
For more such questions on solar panel, click on:
https://brainly.com/question/17960615
#SPJ11
The area ratio of hydraulic press pistons is 1:300. A force of 15 N acts on the small piston. What force acts on the big piston?
The Force acts on the big piston is 1350000 N
"The force exerted on each piston of a hydraulic press is proportional to the surface area of the piston. If the area ratio of the two pistons is 1:300, this means that the larger piston has an area 300 times greater than the smaller piston.
Let A1 be the area of the smaller piston and A2 be the area of the larger piston. Then, we have:
A2 = 300 * A1
According to Pascal's law, the pressure in a closed system is transmitted equally throughout the system. Therefore, the pressure on both pistons is the same. Let P be the pressure on each piston.
The force on each piston can be calculated using the formula:
force = pressure * area
For the smaller piston, we have:
force1 = P * A1
For the larger piston, we have:
force2 = P * A2
Substituting A2 = 300 * A1, we get:
force2 = P * 300 * A1
We know that a force of 15 N acts on the smaller piston (force1 = 15 N). We can now set up an equation to solve for the force on the larger piston (force2):
force1 = force2
P * A1 = P * 300 * A1
Simplifying the equation, we get:
P = P * 300
Dividing both sides by P, we get:
300 = A1 / A2
Substituting A2 = 300 * A1, we get:
300 = A1 / (300 * A1)
Multiplying both sides by 300 * A1, we get:
90000 * A1 = A1
Dividing both sides by A1, we get:
A2 = 90000
Therefore, the area of the larger piston is 90000 times greater than the area of the smaller piston. Now we can use the formula for force:
force2 = P * A2
We know that the force on the smaller piston is 15 N, and the area ratio is 1:300. Therefore, the force on the larger piston can be calculated as follows:
force2 = P * A2
force2 = P * 90000 * A1
force2 = 15 N * 90000
force2 = 1,350,000N
To know more about Hydraulic Press
https://brainly.com/question/29077801
what is the wavelength of a wave that has a speed of 350 Meters/second and a frequency of 140 hertz?
____ meters
Answer:
[tex] \lambda = 2.5 \: m[/tex]Explanation:
To find:-
The wavelength of the wave.Answer:-
We are here given that , the speed of a wave is 350m/s and has a frequency of 140Hz . We are interested in finding out the wavelength of the wavelength of the wave .
As we know that, wavelength, frequency and speed are related to each other as ,
[tex]\longrightarrow\boxed{ v = \lambda \nu} \\[/tex]
where,
[tex]v[/tex] is the speed of the wave.[tex]\lambda[/tex] is the wavelength of the wave.[tex]\nu[/tex] is the frequency of the wave.On substituting the respective values, we have;
[tex]\longrightarrow 350 m/s = \lambda \times 140Hz \\[/tex]
[tex]\longrightarrow \lambda =\dfrac{350}{140} m \\[/tex]
[tex]\longrightarrow \boxed{\boldsymbol \lambda = 2.5 \ m} \\[/tex]
Hence the wavelength of the wave is 2.5 m .
Answer:
2.5meter
Explanation:
edge 2023
christopher and his mother went on a camping trip. his mother struck a match to light a lantern. which forms of energy did the burning match give off? responses nuclear and solar nuclear and solar solar and thermal solar and thermal thermal and light thermal and light nuclear and light
Thermal and light energy are the two types of energy emitted by a burnt match. On their camping vacation, Christopher's mother struck a match to light a lantern, and the burning match released two types of energy.
heat and light. Once the matchstick began to burn, the chemical energy held in it was transformed into thermal energy, generating heat in the process. The heat then drove the surrounding air molecules to vibrate, generating thermal energy that Christopher and his mother could feel. The burning match emitted light energy in addition to temperature energy. The chemical processes that occurred while the matchstick burnt created light energy in the form of a flame. Christopher and his mother were able to perceive this light energy, which gave the lighting required to light the lantern. the burning match gave off both thermal and light energy, which are common forms of energy released during combustion reactions.
learn more about energy here:
https://brainly.com/question/1932868
#SPJ4
A 2.2 kg, 20-cm-diameter turntable rotates at 100 rpm on frictionless bearings. Two 200g blocks fall from above, hit the turntable simultaneously at opposite ends of a diagonal, and stick.
a) What is the turntable's angular velocity, in
rpm , just after this event?
Immediately following the blocks' impact, the turntable's angular velocity was around 90.2 rpm.
How quickly does the turntable spin up following this incident, measured in revolutions per minute?We can start out by applying the conservation of angular momentum. The turntable is rotating at an angle of: before the blocks start to fall.
One revolution per minute equals one revolution per hundred rpm, which is equal to 10.47 rad/s.
The equation for the moment of inertia of a solid disc can be used to calculate the moment of inertia of the turntable:
[tex]I = (1/2) m r^2[/tex]
where r is the turntable's radius and m is its mass. By entering the specified values, we obtain:
I is equal to (1/2) (2.2 kg) (0.1 m)2 = 0.011 kg m2.
The blocks stay to the turntable as they strike it, increasing the system's moment of inertia. By combining the inertial moments of the blocks and the turntable, we can determine the new moment of inertia:
[tex]I' = I + 2m(a/2)^2[/tex]
where m is the combined mass of the two blocks (0.2 kg each), an is the turntable's diameter (0.2 m), and the factor 2 takes into consideration the two blocks. When we enter the values, we obtain:
I' = 0.011 kg m2 plus 2 (0.2 kg)(0.1 m)2 = 0.012 kg m2.
where r is the turntable's radius and m is its mass. By entering the specified values, we obtain:
According to the conservation of angular momentum principle, the system's angular momentum is preserved both before and after the blocks strike the turntable. This can be said as follows:
Iω1 = I'ω'
where'is the system's angular velocity immediately following the blocks' impact with the turntable. When we solve for ', we get:
I' = (I1)/I' = (0.011 kg m2)(10.47 rad/s)/(0.012 kg m2)(9.47 rad/s)
This is converted to rpm and we get:
' = 9.47 rad/s times 60 seconds per minute divided by 2 radians per rotation equals 90.2 rpm.
To know more about visit:
https://brainly.com/question/24096666
#SPJ1
tarik winds a small paper tube uniformly with 161 turns of thin wire to form a solenoid. the tube's diameter is 7.85 mm and its length is 2.49 cm. what is the inductance, in microhenrys, of tarik's solenoid?
Tarik winds a small paper tube uniformly with 161 turns of thin wire to form a solenoid. the tube's diameter is 7.85 mm and its length is 2.49 cm. The inductance of Tarik's solenoid is approximately 8.858 microhenrys.
To calculate the inductance of Tarik's solenoid, we will use the formula for the inductance of a solenoid:
L = (μ₀ * N² * A) / l
where:
L is the inductance (in henrys),
μ₀ is the permeability of free space (4π × 10⁻⁷ H/m),
N is the number of turns,
A is the cross-sectional area of the solenoid (in square meters),
l is the length of the solenoid (in meters).
1. Convert the given measurements to meters:
Diameter = 7.85 mm = 0.00785 m
Length = 2.49 cm = 0.0249 m
2. Calculate the cross-sectional area (A) using the formula for the area of a circle:
A = π * (d/2)² = π * (0.00785/2)² = 4.835 × 10⁻⁵ m²
3. Plug the given values into the inductance formula:
L = (4π × 10⁻⁷ * 161² * 4.835 × 10⁻⁵) / 0.0249 = 8.858 × 10⁻⁶ H
4. Convert the inductance to microhenrys (1 H = 1,000,000 μH):
L = 8.858 × 10⁻⁶ * 1,000,000 = 8.858 μH
So, the inductance of Tarik's solenoid is approximately 8.858 microhenrys.
For more such questions on Tarik's solenoid
brainly.com/question/15015421
#SPJ11
why is when you jump inside of a train you stay in one place but if you jump on the roof you move further?
When you jump inside of a train, you stay in one place because the train is on rails that guide it along a specific track.
The train is powered by wheels and the rails keep it from leaving the track and moving in any other direction. The wheels also keep you in one place as the train moves forward.
However, if you jump on the roof of the train, you will move further because you are no longer affected by the rails and wheels of the train. You can move in any direction and at any speed as long as you are not affected by the wind, other objects, and the force of gravity. This is why you can move further if you jump on the roof of a train.
know more about rails and wheels here
https://brainly.com/question/14961987#
#SPJ11
how much time elapses between the instant when the ball was translating without rotating, and when it rolls without slipping?
Time elapses between the instant when the ball was translating without rotating, and when it rolls without slipping is t = (2/5)MR²μs g/F
Assuming that the ball starts from rest and rolls without slipping at time t = 0, find the time it takes for the ball to start rolling without slipping by using the equations of rotational and translational motion.
Let R be the radius of the ball and I be the moment of inertia of the ball about its center of mass. Since the ball is initially translating without rotating, its angular velocity is zero and its linear velocity is given by:
v = rω
where r is the distance from the center of mass to the point of contact with the ground, which is equal to R in this case.
The acceleration of the ball is given by:
a = αR
where α is the angular acceleration of the ball. Since the ball is initially not rotating, α is zero. However, as the ball starts to roll without slipping, a frictional force acts on it, causing it to rotate. The torque due to this force is given by:
τ = Fr = Iα
where F is the magnitude of the frictional force.
At the instant when the ball starts to roll without slipping, the linear velocity and angular velocity are related by:
v = Rω
And the acceleration and angular acceleration are related by:
a = Rα
Since the ball is rolling without slipping, the linear velocity and angular velocity are related by:
v = Rω
And the acceleration and angular acceleration are related by:
a = Rα
Can use these equations to find the time it takes for the ball to start rolling without slipping. At this instant, the frictional force has reached its maximum value and is equal to the force of static friction, given by:
F = μsmg
where μs is the coefficient of static friction between the ball and the ground, and mg is the weight of the ball.
Thus, can write:
τ = Fr = Iα = μsmgR
Substituting Rω for v and Rα for a, can be get:
μsmgR = Iα/R = I(Rω)/R²
Solving for ω, we get:
ω = μs g R/I
The time it takes for the ball to start rolling without slipping is the time it takes for the angular velocity to reach this value. Using the equation:
ω = αt
t = ω/α = Iμs g R/F
Substituting the values for the moment of inertia, radius, coefficient of static friction, and weight of the ball, get:
t = (2/5)MR²μs g/F
where M is the mass of the ball.
Thus, the time it takes for the ball to start rolling without slipping depends on the mass of the ball, the radius of the ball, the coefficient of static friction between the ball and the ground, and the magnitude of the weight of the ball.
To know more about rotating
https://brainly.com/question/30611953
#SPJ4
Like most spacecraft returning from orbit, the Apollo command module entered the atmosphere at 7.8 km/s. In front of the capsule was a shock front, the leading edge of the shock front we call a bow shock. Let's consider the conditions as it passes an altitude of 50 miles, at about 17,500 miles per hour. What's the altitude, in meters, the speed in km/s ?
The provided student question, we can say that at an altitude of 50 miles, the Apollo command module would be traveling at a speed of 7.8 km/s, or 7800 m/s. The altitude at this speed and altitude would be approximately 80,470 meters.
When answering questions on Brainly, it is important to always be factually accurate, professional, and friendly. Answers should be concise and not provide extraneous amounts of detail. Typos and irrelevant parts of the question should be ignored. Additionally, using the terms provided in the question can help to ensure that the answer is relevant and helpful to the student.
In response to the provided student question, at an altitude of 50 miles, the Apollo command module would be traveling at a speed of approximately 7.8 km/s. To convert this speed to meters per second, we can use the conversion factor of 1 km/s = 1000 m/s. Therefore, the speed of the module in meters per second would be:
7.8 km/s * 1000 m/s = 7800 m/s
The altitude of the module at this speed and altitude would be approximately 80.47 kilometers, or 80,470 meters. This calculation can be done using the formula for atmospheric density, which takes into account factors such as temperature, pressure, and composition of the atmosphere. At an altitude of 50 miles,
the density of the atmosphere is relatively low, which allows the module to maintain a high speed without burning up due to friction with the air.
To learn more about : altitude
https://brainly.com/question/28308143
#SPJ11
Two thin circular dics of mass m and 4m, having radii of a and 2a, respectively, are rigidly fixed by a massless, rigid rod of length = √24 a through their centers. This assembly is laid on a firm and flat surface, and set rolling without slipping on the surface so that the angular speed about the axis of the rod is co. the angular momentum of the entire assembly about the point 'O' is L (see the figure). Which of the following statement (s) is (are) true?
Answer:
I will say the first one
Explanation:
From the figure, we can see that the assembly consists of two circular discs of different masses and radii, which are rigidly fixed to a massless, rigid rod of length √24 a through their centers. The assembly is set rolling without slipping on a flat surface, and the angular speed about the axis of the rod is co. The angular momentum of the entire assembly about the point 'O' is L.
We can use the conservation of angular momentum to answer the question. Since there is no external torque acting on the system, the angular momentum of the system about point 'O' is conserved. Therefore, the initial angular momentum of the system must be equal to the final angular momentum of the system.
The initial angular momentum of the system can be calculated as follows:
Li = I1 * w1 + I2 * w2
Where:
I1 = moment of inertia of the smaller disc about its center = (1/2) * m * a^2
w1 = angular speed of the smaller disc about its center = co
I2 = moment of inertia of the larger disc about its center = (1/2) * 4m * (2a)^2 = 8ma^2
w2 = angular speed of the larger disc about its center = 0 (since the larger disc is not rotating about its center)
Therefore, the initial angular momentum of the system is:
Li = (1/2) * m * a^2 * co + 8ma^2 * 0
Li = (1/2) * m * a^2 * co
The final angular momentum of the system can be calculated as follows:
Lf = I * wf
Where:
I = moment of inertia of the entire assembly about point 'O' = (1/2) * m * a^2 + (4/3) * m * (2a)^2 = (22/3) * ma^2
wf = final angular speed of the entire assembly about point 'O'
Therefore, the final angular momentum of the system is:
Lf = (22/3) * ma^2 * wf
Since the initial angular momentum must be equal to the final angular momentum, we can equate Li and Lf and solve for wf:
(1/2) * m * a^2 * co = (22/3) * ma^2 * wf
wf = (3/44) * co
Therefore, the final angular speed of the entire assembly about point 'O' is (3/44) times the initial angular speed about the axis of the rod.
From the given options, we can see that statement (i) is true, which states that the final angular speed of the entire assembly is less than the initial angular speed about the axis of the rod. Statement (ii) is false, since the final kinetic energy of the entire assembly is less than the initial kinetic energy about the axis of the rod, due to the work done against friction. Therefore, the correct answer is (i) only.
an oscillating system consists of a block attached to a horizontal spring that slides on a frictionless surface. at which time(s) do(es) the system described by the above graph of the block's position versus time have the most elastic potential energy? select any/all correct answers.
The system described by the above graph of the block's position versus time has the most elastic potential energy at times t = T/2. Option C is correct.
The elastic potential energy of a spring-block system is given by the equation PE = (1/2)kx², where k is the spring constant and x is the displacement of the block from its equilibrium position. Since the displacement of the block is at a maximum when it passes through its equilibrium position, the potential energy is also at a maximum at this point.
In the graph provided, the block passes through its equilibrium position twice per period of oscillation T, which corresponds to times t = T/2. At these times, the block has its maximum displacement from the equilibrium position, and therefore the most elastic potential energy. t-T, is also not correct as it is outside the range of one period of oscillation. t=T/4, is also not correct as it corresponds to a point of zero displacement and therefore zero potential energy. Option C is correct.
The complete question is
An oscillating system consists of a block attached to a horizontal spring that slides on a frictionless surface. at which time(s) do(es) the system described by the above graph of the block's position versus time have the most elastic potential energy? Select any/all correct answers.
A. t = 3T/4
B. t-T
C. t=T/2
D. t=T/4
To know more about the Frictionless surface, here
https://brainly.com/question/14633925
#SPJ4
a steel beam that is 7.00 m long weighs 340 n. it rests on two supports, 3.00 m apart, with equal amounts of the beam extending from each end. suki, who weighs 510 n, stands on the beam in the center and then walks toward one end. how close to the end can she come before the beam begins to tip?
A 7.00 m long steel bar weighs 340 n. It sits on two supports that are three meters apart, with the beam stretching equally from each end. Suki can come as close as 0.748 m to one end of the beam before it begins to tip.
To determine how close Suki can come to one end of the beam before it begins to tip, we need to find the point where the torque on one side of the beam equals the torque on the other side of the beam. The torque is the force multiplied by the perpendicular distance to the pivot point.
Initially, the beam is balanced and there is no torque acting on it. When Suki stands on the beam in the center, her weight exerts a downward force of 510 N at the midpoint of the beam. This force creates a clockwise torque around the midpoint since it is acting on one side of the pivot point.
To counteract this torque, an equal and opposite torque needs to be applied to the other side of the pivot point. This can be achieved by applying a force at a greater distance from the pivot point since torque is proportional to the distance.
The total weight of the beam and Suki is 340 N + 510 N = 850 N. This weight is evenly distributed along the length of the beam. Therefore, the weight of the portion of the beam extending from one support to the point where Suki is standing is:
w = (1/2) × 850 N = 425 N
The distance from the midpoint to one end of the beam is 3.5 m. To find how close Suki can come to one end of the beam before it begins to tip, we can use the formula for torque:
τ = F × d
where τ is the torque, F is the force, and d is the distance from the pivot point.
If Suki is a distance x from the midpoint of the beam, then the weight of the portion of the beam extending from that point to the end is:
w' = w - (x / 3.5) × w
The torque due to the weight of this portion of the beam is:
τ1 = w' × x
The torque due to Suki's weight is:
τ2 = 510 N × (x/2)
Setting these two torques equal, we have:
w' × x = 510 N × (x/2)
Solving for x, we get:
x = 2 × w' / 510 N
Substituting the expression for w', we have:
x = 2 × (w - (x/3.5) × w) / 510 N
Solving for x, we get:
x = 0.748 m
To learn more about beam
https://brainly.com/question/28288610
#SPJ4
you can move the bar magnet around. when does the light bulb shine brightest with the loop area fixed?
The light bulb shines brightest when the bar magnet is moved quickly in and out of the loop area.
The light bulb will shine brightest when the bar magnet is moved quickly in and out of the loop area. This is because the faster the magnet moves, the greater the change in magnetic field and the greater the induced emf and current in the loop.
At the same time, the resistance of the loop remains constant, so the power dissipated by the bulb, which is proportional to the square of the current, increases with the speed of the magnet. If the magnet is moved too slowly, the induced emf and current will be too weak to light up the bulb.
To know more about bar magnet, here
brainly.com/question/30323670
#SPJ4