The speed of the ball after 2 seconds is 10.4 m/s. (Answer B)
To determine the speed of the ball after 2 seconds, we need to take into account the acceleration due to gravity acting on it.
The ball is thrown straight up, which means it is moving against the force of gravity. The acceleration due to gravity is approximately 9.8 m/s² and acts downward.
Using the equation for motion under constant acceleration, which relates displacement, initial velocity, acceleration, and time:
v = u + at
where:
v = final velocityu = initial velocitya = accelerationt = timeIn this case, the initial velocity (u) is 30 m/s, the acceleration (a) is -9.8 m/s² (negative because it acts in the opposite direction), and the time (t) is 2 seconds.
Plugging in the values:
v = 30 m/s + (-9.8 m/s²) * 2 s
v = 30 m/s - 19.6 m/s
v = 10.4 m/s
Therefore, the speed of the ball after 2 seconds is 10.4 m/s.
The correct answer is B. 10.4 m/s.
To learn more about final velocity, Visit:
https://brainly.com/question/25905661
#SPJ11
A heart defibrillator passes 12.1 A through a patient's torso for 5.00 ms in an attempt to restore normal beating. (a) How much charge passed? What voltage was applied if 468 ) of energy was dissipated? KV (c) What was the path's resistance? kn (d) Find the temperature increase caused in the 8.00 kg of affected tissue. The specific heat of tissue is 3500 J/(kg. "C). °C
(a) The amount of charge passed through the patient's torso is 0.0605 C, (b) The voltage applied during the procedure is 7711.57 V, (c) The resistance of the path is 636.78 Ω, (d) The temperature is 0.0168 °C.
The charge passed through the patient's torso can be calculated by multiplying the current and the time, the applied voltage can be determined by dividing the energy dissipated by the charge, the path's resistance can be found by dividing the voltage by the current, and the temperature increase in the affected tissue can be determined using the specific heat formula.
(a) To find the charge passed, we multiply the current (I) and the time (t): Charge = I * t = 12.1 A * 5.00 ms = 0.0605 C.
(b) The voltage applied can be determined by dividing the energy dissipated (E) by the charge (Q): Voltage = E / Q = 468 J / 0.0605 C = 7711.57 V.
(c) The path's resistance (R) can be found by dividing the voltage (V) by the current (I): Resistance = V / I = 7711.57 V / 12.1 A = 636.78 Ω.
(d) To calculate the temperature increase (ΔT) in the affected tissue, we can use the specific heat formula: ΔT = (Energy dissipated) / (mass * specific heat) = 468 J / (8.00 kg * 3500 J/(kg.°C)) = 0.0168 °C.
To learn more about patient's torso -
brainly.com/question/28978964
#SPJ11
A curling stone slides on ice with a speed of 2.0 m/s and collides inelastically with an identical, stationary curling stone. After the collision, the first stone is deflected by a counterclockwise angle of 28° from its original direction of travel, and the second stone moves in a direction that makes a 42° clockwise angle with the original direction of travel of the first stone. What fraction of the initial energy is lost in this collision? A) 0.12 B) 0.24 C) 0.48 D) 0.64 E) 0.36
The fraction of initial energy lost in this collision is 0. This implies that no energy is lost, indicating an elastic collision.
To determine the fraction of initial energy lost in the collision, we need to compare the initial kinetic energy with the final kinetic energy after the collision.
Given:
Initial speed of the first stone (v_1) = 2.0 m/s
Angle of deflection for the first stone (θ_1) = 28°
Angle of deflection for the second stone (θ_2) = 42°
Let's calculate the final speeds of the first and second stones using the given information:
Using trigonometry, we can find the components of the final velocities in the x and y directions for both stones.
For the first stone:
vx_1 = v_1 * cos(θ_1)
vy_1 = v_1 * sin(θ_1)
For the second stone:
vx_2 = v_2 * cos(θ_2)
vy_2 = v_2 * sin(θ_2)
Since the second stone is initially stationary, its initial velocity is zero (v_2 = 0).
Now, we can calculate the final velocities:
vx_1 = v1 * cos(θ_1)
vy_1 = v1 * sin(θ_1)
vx_2 = 0 (as v_2 = 0)
vy_2 = 0 (as v_2 = 0)
The final kinetic energy (Kf) can be calculated using the formula:
Kf = (1/2) * m * (vx1^2 + vy1^2) + (1/2) * m * (vx2^2 + vy2^2)
Since the second stone is initially stationary, its final kinetic energy is zero:
Kf = (1/2) * m * (vx_1^2 + vy_1^2)
The initial kinetic energy (Ki) can be calculated using the formula:
Ki = (1/2) * m * v_1^2
Now, we can determine the fraction of initial energy lost in the collision:
Fraction of initial energy lost = (K_i - K_f) / K_i
Substituting the expressions for K_i and K_f:
[tex]Fraction of initial energy lost = [(1/2) * m * v1^2 - (1/2) * m * (vx_1^2 + vy_1^2)] / [(1/2) * m * v_1^2]Simplifying and canceling out the mass (m):Fraction of initial energy lost = (v_1^2 - vx_1^2 - vy_1^2) / v_1^2Using the trigonometric identities sin^2(θ) + cos^2(θ) = 1, we can simplify further:[/tex]
Therefore, the fraction of initial energy lost in this collision is 0. This implies that no energy is lost, indicating an elastic collision.
Learn more about elastic collision
https://brainly.com/question/24616147
#SPJ11[tex]Fraction of initial energy lost = (v_1^2 - vx_1^2 - vy_1^2) / v_1^2Fraction of initial energy lost = (v_1^2 - v_1^2 * cos^2(θ_1) - v_1^2 * sin^2(θ_1)) / v_1^2Fraction of initial energy lost = (v_1^2 * (1 - cos^2(θ_1) - sin^2(θ_1))) / v_1^2Fraction of initial energy lost = (v_1^2 * (1 - 1)) / v1^2Fraction of initial energy lost = 0[/tex]
When a mass is hung from your spring, it extends (stretches). The larger the mass, the more the spring stretches. Each lab kit has a unique spring that will extend a different amount based on the applied force. In general, what is the equation describing the spring force as a function of spring extension Ax (ie. Fspring_ )? This is the equation that will allow you to calibrate your spring in the next part of the lab. If we know the spring constant k, then you could use your spring to measure forces by measuring Ax. Unfortunately, we don't know k. But if we have an object with a known weight, we can measure k and calibrate our spring. To do this, you will be hanging an object of known mass from your spring and measuring the extension Ax. Before you hang your object from your spring, measure the unstretched, natural length of your spring and enter the value into the table below. Also enter the mass and weight of the object you have chosen for the experiment. Now, hang your chosen object from your spring and measure the spring's stretched length. Enter this value into the table below. Note: If your spring appears to continue stretching while your object hangs, you may need to select a lighter object. Since the object is stationary, how do the magnitude of Fspring and F, relate?
The magnitude of the spring force (Fspring) and the weight force (F) are equal when the object is in static equilibrium. According to Hooke's Law.
The force exerted by a spring is directly proportional to its extension or displacement. The equation describing the spring force as a function of spring extension (Ax) is given by:
Fspring = k * Ax
where:
Fspring is the magnitude of the spring force,
k is the spring constant (a measure of the stiffness of the spring),
Ax is the extension or displacement of the spring from its unstretched position.
In the case of static equilibrium, when the object is not accelerating, the spring force (Fspring) exerted by the spring is equal in magnitude but opposite in direction to the weight force (F) acting on the object. This can be expressed as:
|Fspring| = |F|
The spring force pulls the object upward, counteracting the downward force due to gravity. When these forces are equal, the object remains stationary.
To learn more about Hooke's Law click here
https://brainly.com/question/30379950
#SPJ11
Energy is conventionally measured in Calories as well as in joules. One Calorie in nutrition is one kilocalorie, defined as 1 kcal =4186J. Metabolizing 1g of fat can release 9.00 kcal. A student decides to try to lose weight by exercising. He plans to run up and down the stairs in a football stadium as fast as he can and as many times as necessary. To evaluate the program, suppose he runs up a flight of 80 steps, each 0.150m high, in 65.0 s . For simplicity, ignore the energy he uses in coming down (which is small). Assume a typical efficiency for human muscles is 20.0% . This statement means that when your body converts 100 J from metabolizing fat, 20J goes into doing mechanical work (here, climbing stairs). The remainder goes into extra internal energy. Assume the student's mass is 75.0kg..(c) Is this activity in itself a practical way to lose weight?
Running up and down stairs in a football stadium can be a practical way to lose weight if the student expends more energy than the energy stored in fat. This activity can be a part of a weight loss program but should be combined with other healthy habits for optimal results.
The activity of running up and down stairs in a football stadium can be a practical way to lose weight. To determine this, we need to calculate the energy expended by the student during the activity.
First, we need to calculate the work done by the student in climbing the stairs. The work done is equal to the force exerted (which is the weight of the student) multiplied by the distance traveled (which is the height of each step multiplied by the number of steps climbed). The weight of the student can be calculated using the formula weight = mass * gravity, where the mass is given as 75.0 kg and the gravity is approximately 9.8 m/s^2.
To determine if this activity is a practical way to lose weight, we need to compare the energy expended to the amount of energy stored in fat. One pound of fat is approximately equal to 3500 calories or 14.6 million joules. If the student can expend more energy than the energy stored in fat, then this activity can contribute to weight loss.
To know more about gravity visit:
https://brainly.com/question/31321801
#SPJ11
If you are using a motion encodr receiver to find the veloicty of a cart, how would you find the uncertainty in veloicty?
To find the uncertainty in velocity using a motion encoder receiver, you need to consider the uncertainties in the measurements, collect multiple measurements, calculate the standard deviation, and report the uncertainty as a range around the measured velocity.
To find the uncertainty in velocity when using a motion encoder receiver, you would need to consider the uncertainties associated with the measurements taken by the receiver. Here's how you can do it:
Determine the uncertainties in the measurements: This involves identifying the sources of uncertainty in the motion encoder receiver. It could be due to factors like resolution limitations, noise in the signal, or calibration errors. Consult the manufacturer's specifications or conduct experiments to determine these uncertainties.
Collect multiple measurements: Take several velocity measurements using the motion encoder receiver. It is important to take multiple readings to account for any random variations or errors.
Calculate the standard deviation: Calculate the standard deviation of the collected measurements. This statistical measure quantifies the spread of the data points around the mean. It provides an estimation of the uncertainty in the velocity measurements.
Report the uncertainty: Express the uncertainty as a range around the measured velocity. Typically, uncertainties are reported as a range of values, such as ± standard deviation or ± percentage. This range represents the potential variation in the velocity measurements due to the associated uncertainties.
To find the uncertainty in velocity using a motion encoder receiver, you need to consider the uncertainties in the measurements, collect multiple measurements, calculate the standard deviation, and report the uncertainty as a range around the measured velocity.
To know more about velocity visit:
brainly.com/question/30559316
#SPJ11
The predominant wavelength emitted by an ultraviolet lamp is 350 nm a) What is a frequency of this light? b) What is the energy (in joules) of a single photon of this light? c) If the total power emitted at this wavelength is 30.0 W, how many photons are emitted per second? (20 pts.)
a) The frequency of the ultraviolet light is approximately 8.57 × 10¹⁴ Hz. b) The energy of a single photon of this light is approximately 5.67 × 10^(-19) Joules.c) Approximately 5.29 × 10¹⁹ photons are emitted per second at this wavelength.
a) To calculate the frequency of the ultraviolet light, we can use the equation:
frequency (ν) = speed of light (c) / wavelength (λ)
Given that the wavelength is 350 nm (or 350 × 10⁽⁹⁾m) and the speed of light is approximately 3 × 10⁸m/s, we can substitute these values into the equation:
frequency (ν) = (3 × 10⁸ m/s) / (350 × 10⁽⁻⁹⁾ m)
ν = 8.57 × 10¹⁴ Hz
Therefore, the frequency of the ultraviolet light is approximately 8.57 × 10^14 Hz.
b) To calculate the energy of a single photon, we can use the equation:
energy (E) = Planck's constant (h) × frequency (ν)
The Planck's constant (h) is approximately 6.63 × 10⁽⁻³⁴⁾ J·s.
Substituting the frequency value obtained in part a into the equation, we get:
E = (6.63 × 10⁽⁻³⁴⁾ J·s) × (8.57 × 10¹⁴ Hz)
E = 5.67 × 10⁽⁻¹⁹⁾J
Therefore, the energy of a single photon of this light is approximately 5.67 × 10⁽⁻¹⁹⁾ Joules.
c) To calculate the number of photons emitted per second, we can use the power-energy relationship:
Power (P) = energy (E) × number of photons (n) / time (t)
Given that the power emitted at this wavelength is 30.0 W, we can rearrange the equation to solve for the number of photons (n):
n = Power (P) × time (t) / energy (E)
Substituting the values into the equation:
n = (30.0 W) × 1 s / (5.67 × 10⁽⁻¹⁹⁾ J)
n = 5.29 × 10¹⁹ photons/s
Therefore, approximately 5.29 × 10¹⁹photons are emitted per second at this wavelength.
To know more about ultraviolet light refer here
brainly.com/question/31722535
#SPJ11
a rectangular loop of wire carrying a 1.0A current and with a certian dimension is placed in a magnetic field of 0.80T. the magnitude of the torque acting on this wire when it makes a 30degree angle with thr field is 0.24 Nm. what is the area of this wire
the area of the wire is approximately 0.60 square meters.
The torque acting on a rectangular loop of wire in a magnetic field is given by the formula:
Torque = B * I * A * sin(θ)
where B is the magnetic field strength, I is the current, A is the area of the loop, and θ is the angle between the loop's normal vector and the magnetic field.
In this case, the torque is given as 0.24 Nm, the current is 1.0A, the magnetic field strength is 0.80T, and the angle is 30 degrees.
We can rearrange the formula to solve for the area A:
A = Torque / (B * I * sin(θ))
A = 0.24 Nm / (0.80 T * 1.0 A * sin(30°))
Using a calculator:
A ≈ 0.24 Nm / (0.80 T * 1.0 A * 0.5)
A ≈ 0.60 m²
Therefore, the area of the wire is approximately 0.60 square meters.
Learn more about torque here:
https://brainly.com/question/17512177
#SPJ11
A man-made satellite of mass 6000 kg is in orbit around the earth, making one revolution in 450 minutes. Assume it has a circular orbit and it is interacting with earth only.
a.) What is the magnitude of the gravitational force exerted on the satellite by earth?
b.) If another satellite is at a circular orbit with 2 times the radius of revolution of the first one, what will be its speed?
c.) If a rocket of negligible mass is attached to the first satellite and the rockets fires off for some time to increase the radius of the first satellite to twice its original mass, with the orbit again circular.
i.) What is the change in its kinetic energy?
ii.) What is the change in its potential energy?
iii.) How much work is done by the rocket engine in changing the orbital radius?
Mass of Earth is 5.97 * 10^24 kg
The radius of Earth is 6.38 * 10^6 m,
G = 6.67 * 10^-11 N*m^2/kg^2
a) The magnitude of the gravitational force exerted on the satellite by Earth is approximately 3.54 * 10^7 N.
b) The speed of the second satellite in its circular orbit is approximately 7.53 * 10^3 m/s.
c) i) There is no change in kinetic energy (∆KE = 0).
ii) The change in potential energy is approximately -8.35 * 10^11 J.
iii) The work done by the rocket engine is approximately -8.35 * 10^11 J.
a) To calculate the magnitude of the gravitational force exerted on the satellite by Earth, we can use the formula:
F = (G × m1 × m2) / r²
where F is the gravitational force, G is the gravitational constant, m1 is the mass of the satellite, m2 is the mass of Earth, and r is the radius of the orbit.
Given:
Mass of the satellite (m1) = 6000 kg
Mass of Earth (m2) = 5.97 × 10²⁴ kg
Radius of the orbit (r) = radius of Earth = 6.38 × 10⁶ m
Gravitational constant (G) = 6.67 × 10⁻¹¹ N×m²/kg²
Plugging in the values:
F = (6.67 × 10⁻¹¹ N×m²/kg² × 6000 kg × 5.97 × 10²⁴ kg) / (6.38 × 10⁶ m)²
F ≈ 3.54 × 10⁷ N
Therefore, the magnitude of the gravitational force exerted on the satellite by Earth is approximately 3.54 * 10^7 N.
b) The speed of a satellite in circular orbit can be calculated using the formula:
v = √(G × m2 / r)
Given that the radius of the second satellite's orbit is 2 times the radius of the first satellite's orbit:
New radius of orbit (r') = 2 × 6.38 * 10⁶ m = 1.276 × 10⁷ m
Plugging in the values:
v' = √(6.67 × 10⁻¹¹ N×m²/kg^2 × 5.97 × 10²⁴ kg / 1.276 × 10⁷ m)
v' ≈ 7.53 × 10³ m/s
Therefore, the speed of the second satellite in its circular orbit is approximately 7.53 * 10^3 m/s.
c) i) The change in kinetic energy can be calculated using the formula:
∆KE = (1/2) × m1 × (∆v)²
Since the satellite is initially in a circular orbit and its speed remains constant throughout, there is no change in kinetic energy (∆KE = 0).
ii) The change in potential energy can be calculated using the formula:
∆PE = - (G × m1 × m2) × ((1/r') - (1/r))
∆PE = - (6.67 × 10⁻¹¹ N*m²/kg² × 6000 kg × 5.97 × 10²⁴ kg) × ((1/1.276 × 10⁷ m) - (1/6.38 × 10⁶ m))
∆PE ≈ -8.35 × 10¹¹ J
The change in potential energy (∆PE) is approximately -8.35 × 10¹¹ J.
iii) The work done by the rocket engine in changing the orbital radius is equal to the change in potential energy (∆PE) since no other external forces are involved. Therefore:
Work done = ∆PE ≈ - 8.35 × 10¹¹ J
The work done by the rocket engine is approximately -8.35 × 10¹¹ J. (Note that the negative sign indicates work is done against the gravitational force.)
Read more on gravitational force here: https://brainly.com/question/940770
#SPJ11
1 1.5 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a neutron will always experience a force in a magnetic field. Is this statement true or false? True False (response not displayed) 2 1.5 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a neutron will always experience a force in an electric field. Is this statement true or false? True False E. (response not displayed) 3 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a proton will always experience a force in an electric field. Is this statement true or false? True False E. (response not displayed) 4 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that an electron will always experience a force in an electric field. Is this statement true or false? True False 5 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that an electron will always experience a force in a magnetic field. Is this statement true or false? True False E. (response not displayed) 6 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a proton will always experience a force in a magnetic field. Is this statement true or false? True False E. (response not displayed)
The statement that a neutron will always experience a force in a magnetic field is false. Neutrons are electrically neutral particles, meaning they have no net electric charge. Therefore, they do not experience a force in a magnetic field because magnetic forces act on charged particles.
The statement that a neutron will always experience a force in an electric field is false. Neutrons are electrically neutral particles and do not have a net electric charge. Electric fields exert forces on charged particles, so a neutral particle like a neutron will not experience a force in an electric field.
The statement that a proton will always experience a force in an electric field is true. Protons are positively charged particles, and they experience a force in the presence of an electric field. The direction of the force depends on the direction of the electric field and the charge of the proton.
The statement that an electron will always experience a force in an electric field is true. Electrons are negatively charged particles, and they experience a force in the presence of an electric field. The direction of the force depends on the direction of the electric field and the charge of the electron.
The statement that an electron will always experience a force in a magnetic field is true. Charged particles, including electrons, experience a force in a magnetic field. The direction of the force is perpendicular to both the magnetic field and the velocity of the electron, following the right-hand rule.
The statement that a proton will always experience a force in a magnetic field is true. Charged particles, including protons, experience a force in a magnetic field. The direction of the force is perpendicular to both the magnetic field and the velocity of the proton, following the right-hand rule.
To know more about magnetic field click this link -
brainly.com/question/14848188
#SPJ11
An elevator filled with passengers has a mass of 1890 kg. (a) The elevator accelerates upward from rest at a rate of 1.2 m/s*2 for 1.4 s. Calculate the tension in the
cable supporting the elevator.
Given, Mass of the elevator, m = 1890 kg
Acceleration, a = 1.2 m/s²Time, t = 1.4 s
To find: Tension, T The free-body diagram of the elevator is shown below:
From the free-body diagram, we can write the equation of motion in the vertical direction:
F_net = maT - mg = ma
Here,m = 1890 kg
g = 9.8 m/s²a = 1.2 m/s²
Substituting these values in the above equation we get,
T - 18522 N = 2268 N (downward force)
T = 18522 N + 2268 NT = 20790 N.
The tension of the elevator is 20790 N.
#SPJ11
Learn more about Mass and tension https://brainly.com/question/24994188
Classify the following statements about Einstein's postulates based on whether they are true or false, True False The speed of light is a constant in all uniformly moving reference frames All reference frames are arbitrary Motion can only be measured relative to one fixed point in the universe. The laws of physics work the same whether the reference frame is at rest or moving at a uniform speed Within a reference frame, it can be experimentally determined whether or not the reference frame is moving The speed of light varies with the speed of the source Answer Bank
According to Einstein's postulates of special relativity, the speed of light in a vacuum is constant and does not depend on the motion of the source or the observer.
This fundamental principle is known as the constancy of the speed of light.
True or False:
1) The speed of light is a constant in all uniformly moving reference frames - True
2) All reference frames are arbitrary - False
3) Motion can only be measured relative to one fixed point in the universe - False
4) The laws of physics work the same whether the reference frame is at rest or moving at a uniform speed - True
5) Within a reference frame, it can be experimentally determined whether or not the reference frame is moving - False
6) The speed of light varies with the speed of the source - False
Learn more about speed of light here : brainly.com/question/28224010
#SPJ11
Show all work please, thank you!
An L-C circuit has an inductance of 0.350 H and a capacitance of 0.230 nF. During the current oscillations, the maximum current in the inductor is 2.00 A .
A) What is the maximum energy Emax stored in the capacitor at any time during the current oscillations? Express your answer in joules.
Emax=?
B) How many times per second does the capacitor contain the amount of energy found in part A? Express your answer in times per second.
The maximum energy stored in the capacitor (Emax) is 0.35 J. The capacitor contains the amount of energy found in part A approximately 17739 times per second.
To calculate the maximum energy stored in the capacitor (Emax), we can use the formula:
Emax = (1/2) * C * [tex]V^2[/tex]
where C is the capacitance and V is the maximum voltage across the capacitor.
Given:
Inductance (L) = 0.350 H
Capacitance (C) = 0.230 nF = 0.230 * [tex]10^{(-9)[/tex] F
Maximum current (I) = 2.00 A
To find the maximum voltage (V), we can use the relationship between the inductor current (I), inductance (L), and capacitor voltage (V) in an L-C circuit:
I = √(2 * Emax / L) [equation 1]
We can rearrange equation 1 to solve for Emax:
Emax = ([tex]I^2[/tex] * L) / 2 [equation 2]
Substituting the given values into equation 2:
Emax = ([tex]2.00^2[/tex] * 0.350) / 2 = 0.35 J
Therefore, the maximum energy stored in the capacitor (Emax) is 0.35 J.
To calculate the number of times per second (N) that the capacitor contains the amount of energy found in part A, we can use the formula:
N = 1 / (2π * √(LC)) [equation 3]
Substituting the given values into equation 3:
N = 1 / (2π * √(0.350 * 0.230 * 10^(-9))) ≈ 17739 [tex]s^{(-1)[/tex]
Therefore, the capacitor contains the amount of energy found in part A approximately 17739 times per second.
Know more about capacitor:
https://brainly.com/question/32648063
#SPJ4
2) A current carrying wire is running in the N/S direction and there exists a B field equal to .3 Teslas at an angle of 56 degrees North of East. The length of the wire is 1.34 meters and its mass is 157 grams. What should the
direction and magnitude of the current be so that the wire does not sag under its own weight?
The magnitude of the current should be approximately 3.829 Amperes and the direction of the current should be from West to East in the wire to prevent sagging under its own weight.
To determine the direction and magnitude of the current in the wire such that it does not sag under its own weight, we need to consider the force acting on the wire due to the magnetic field and the gravitational force pulling it down.
The gravitational force acting on the wire can be calculated using the equation:
[tex]F_{gravity }[/tex] = mg
where m is the mass of the wire and
g is the acceleration due to gravity (approximately 9.8 m/s²).
Given that the mass of the wire is 157 grams (or 0.157 kg), we have:
[tex]F_{gravity }[/tex] = 0.157 kg × 9.8 m/s²
= 1.5386 N
The magnetic force on a current-carrying wire in a magnetic field is given by the equation:
[tex]F__{magnetic}[/tex] = I × L × B sinθ
where I is the current in the wire,
L is the length of the wire,
B is the magnetic field strength, and
θ is the angle between the wire and the magnetic field.
Given:
Length of the wire (L) = 1.34 meters
Magnetic field strength (B) = 0.3 Tesla
Angle between the wire and the magnetic field (θ): 56°
Converting the angle to radians:
θrad = 56 degrees × (π/180)
≈ 0.9774 radians
Now we can calculate the magnetic force:
[tex]F__{magnetic}[/tex] = I × 1.34 m × 0.3 T × sin(0.9774)
= 0.402 × I N
For the wire to not sag under its own weight, the magnetic force and the gravitational force must balance each other. Therefore, we can set up the following equation:
[tex]F__{magnetic}[/tex] = [tex]F_{gravity }[/tex]
0.402 × I = 1.5386
Now we can solve for the current (I):
I = 1.5386 / 0.402
I ≈ 3.829 A
So, the magnitude of the current should be approximately 3.829 Amperes.
To determine the direction of the current, we need to apply the right-hand rule. Since the magnetic field is pointing at an angle of 56° North of East, we can use the right-hand rule to determine the direction of the current that produces a magnetic force opposing the gravitational force.
Therefore, the direction of the current should be from West to East in the wire to prevent sagging under its own weight.
Learn more about Magnetic Field from the given link:
https://brainly.com/question/30331791
#SPJ11
What is the de Broglie wavelength (in m) of a neutron moving at
a speed of 3.28 ✕ 104 m/s?
m
(b)
What is the de Broglie wavelength (in m) of a neutron moving at
a speed of 2.46 ✕ 108 m/s?
m
(a) The de Broglie wavelength of a neutron moving at a speed of 3.28 x 10^4 m/s is 1.16 x 10^-10 m. (b) The de Broglie wavelength of a neutron moving at a speed of 2.46 x 10^8 m/s is 1.38 x 10^-12 m.
The de Broglie wavelength of a particle is given by the equation:
λ = h / mv
where:
λ is the wavelength in metersh is Planck's constant (6.626 x 10^-34 J s)m is the mass of the particle in kilogramsv is the velocity of the particle in meters per secondIn the first case, the mass of the neutron is 1.67 x 10^-27 kg and the velocity is 3.28 x 10^4 m/s. Plugging these values into the equation, we get a wavelength of 1.16 x 10^-10 m.
In the second case, the mass of the neutron is the same, but the velocity is 2.46 x 10^8 m/s. Plugging these values into the equation, we get a wavelength of 1.38 x 10^-12 m.
As you can see, the de Broglie wavelength of a neutron is inversely proportional to its velocity. This means that as the velocity of the neutron increases, its wavelength decreases.
To know more about wavelength click here
brainly.com/question/28466888
#SPJ11
A camera lens used for taking close-up photographs has a focal length of 26.0 mm. The farthest it can be placed from the film is 33.5 mm. What is the closest object that can be photographed? 116 mm You are correct. Previous Tries Your receipt no. is 162-480 What is the magnification of this closest object? Submit Answer Incorrect. Tries 2/40 Previous Tries
The magnification of the closest object is approximately -1.29.
The magnification of an object can be determined using the formula:
Magnification = -Image Distance / Object Distance
In this case, since the lens is used for close-up photographs, the object distance is equal to the focal length (26.0 mm). The image distance is the distance at which the object is in focus, which is the closest the lens can be placed from the film (33.5 mm).
Substituting the values into the formula:
Magnification = -(33.5 mm) / (26.0 mm) ≈ -1.29
The magnification of the closest object is approximately -1.29. Note that the negative sign indicates that the image is inverted.
Learn more about magnification:
https://brainly.com/question/30402564
#SPJ11
Q3 The intensity of sunlight reaching the earth is 1360 W/m². (a) What is the average power output of the sun? (b) What is the intensity of sunlight on Mars?
In part (a), we are given the average power output of the Sun, which is 3.846 × 10^26 W.
We are then asked to calculate the average power output using the formula P/4πr², where P is the luminosity of the Sun and r is the radius of the sphere representing the surface of the Sun.
The radius of the sphere representing the surface of the Sun is 6.96 × 10^8 m. Substituting the given values into the formula, we have:
P/4πr² = 3.846 × 10^26 W
Therefore, the average power output of the Sun is P/4πr² = 3.846 × 10^26 W.
In part (b), we are asked to determine the intensity of sunlight on Mars, given that it is 588 W/m². The intensity of sunlight on Mars is lower compared to Earth due to the larger distance between Mars and the Sun and the thin Martian atmosphere.
The average distance between Mars and the Sun is approximately 1.52 astronomical units (AU) or 2.28 × 10^11 m. Using the formula I = P/4πd², where I is the intensity of sunlight and d is the distance between Mars and the Sun, we can calculate the intensity.
Substituting the given values into the formula, we have:
I = 1360/(4 × 3.142 × (2.28 × 10^11)²)
I = 588 W/m²
Therefore, the intensity of sunlight on Mars is indeed 588 W/m². This lower intensity is due to the greater distance between Mars and the Sun and the resulting spreading of sunlight over a larger area.
To Learn more about intensity of sunlight on Mars. Click this!
brainly.com/question/31991143
#SPJ11
Problem 13.37 An air bubble at the bottom of a lake 36.0 m deep has a volume of 1.00 cm³. Part A If the temperature at the bottom is 2.3°C and at the top 25.4°C, what is the radius of the bubble just before it reaches the surface? Express your answer to two significant figures and include the appropriate units. Value Submit #A Provide Feedback Units B ? Previous Answers Request Answer X Incorrect; Try Again; 3 attempts remaining 8 of 10 Review Constants Next >
The radius of the air bubble just before it reaches the surface is 0.38 cm. As the bubble rises, the pressure decreases and the temperature increases, causing the volume of the bubble to increase.
The ideal gas law states that:
PV = nRT
where:
P is the pressure
V is the volume
n is the number of moles of gas
R is the ideal gas constant
T is the temperature
We can rearrange this equation to solve for the volume:
V = (nRT) / P
The number of moles of gas in the bubble is constant, so we can factor it out:
V = nR(T / P)
The temperature at the bottom of the lake is 2.3°C, and the temperature at the top is 25.4°C. The pressure at the bottom of the lake is equal to the atmospheric pressure plus the pressure due to the water column, which is 36.0 m * 1000 kg/m^3 * 9.8 m/s^2 = 3.52 * 10^6 Pa.
The pressure at the top of the lake is just the atmospheric pressure, which is 1.01 * 10^5 Pa.
Plugging these values into the equation, we get:
V = nR(25.4°C / 3.52 * 10^6 Pa) = 1.00 cm^3
Solving for the radius, we get:
r = (V / 4/3π)^(1/3) = 0.38 cm
To learn more about air bubble click here: brainly.com/question/30595829
#SPJ11
A membrane of thickness b = 5x10 m is polarized with the potential difference across the membrane is 80 mV. (12 points) a) Find the electric field inside the membrane. b) The Charge density on the outside layer if the membrane. c) The pressure exerted by one side on the other. Compare the pressure to the atmospheric pressure. d) The capacitance per unit area of the membrane.
a) The electric field inside the membrane is 1.6 x 10¹⁴ V/m.
b) The capacitance per unit area of the membrane is 1.77 x 10⁻³ F/m².
c) The pressure exerted by one side on the other is 1.65 x 10⁶ N/m².
Given data:
Thickness of the membrane, b = 5 x 10⁻⁹ m
Potential difference across the membrane, V = 80 mV
(a)
The electric field, E inside the membrane is given by the relation,
E = V / bE
= 80 mV / 5 x 10⁻⁹ m
= 1.6 x 10¹⁴ V/m
Therefore, the electric field inside the membrane is 1.6 x 10¹⁴ V/m.
(b)
The capacitance, C of the membrane can be given as,C = ε₀A / b
Where, ε₀ is the permittivity of free space,
A is the area of the membrane.
Capacitance per unit area is given by,
C / A = ε₀ / b
C / A = (8.85 x 10⁻¹² F/m) / (5 x 10⁻⁹ m)
C / A = 1.77 x 10⁻³ F/m².
Therefore, the capacitance per unit area of the membrane is 1.77 x 10⁻³ F/m².
(c)
The charge density on the outside layer of the membrane is given by the relation,
σ = ε₀E
σ = (8.85 x 10⁻¹² F/m) x (1.6 x 10¹⁴ V/m)
σ = 1.42 x 10³ C/m²
Therefore, the charge density on the outside layer of the membrane is 1.42 x 10³ C/m².
Pressure, P exerted by one side on the other is given by the relation,
P = σ² / 2ε₀
P = (1.42 x 10³ C/m²)² / [2 x (8.85 x 10⁻¹² F/m)]
P = 1.65 x 10⁶ N/m²
Therefore, the pressure exerted by one side on the other is 1.65 x 10⁶ N/m².
To know more about capacitance, visit:
https://brainly.com/question/31871398
#SPJ11
When a -4.3 C charge moves at speed 312 m/s into into a magnetic field it experiences a magnetic force of magnitude 4.9 N. Calculate the magnitude of the magnetic field. (Give your answer in tesla but don't include the units.) The magnitude of the magnetic field at the center of a 29-turn loop of wire is 3.7 x 10-6 T. Calculate the current in the loop if the radius is 19 cm. (Give your answer in amps but don't include the units.)
-0.043 T is the magnitude of the magnetic field. 0.6 A is the current in the loop if the radius is 19 cm.
A flow of charged particles, such as electrons or ions, through an electrical conductor or a vacuum is known as an electric current. The net rate of electric charge flow through a surface is how it is described. Charge carriers, which can be any of a number of particle kinds depending on the conductor, are the moving particles. Electrons flowing over a wire are frequently used as charge carriers in electric circuits. They can be electrons or holes in semiconductors. Ions are the charge carriers in an electrolyte, whereas ions and electrons are the charge carriers in plasma, an ionised gas.
F = qvB
B = F / (qv)
B = 4.9 N / (-4.3 x 10⁻⁶ C)(312 m/s)
= -0.043 T
B = μ0I / (2r)
I = 2rB / μ0
I = 2(0.19 m)(3.7 x 10⁻⁶ T) / (4π x 10⁻⁷ T m/A)
= 0.6 A
To know more about current, here:
https://brainly.com/question/31657860
#SPJ4
The magnitude of the magnetic field is 3.722 x 10⁻⁴ T. The current in the loop is 2.2 A.
The magnitude of the magnetic field:
F = q × v × B × sin(θ)
where F is the magnetic force, q is the charge, v is the velocity, B is the magnetic field strength, and θ is the angle between the velocity and the magnetic field.
Given:
Charge q = -4.3 C
Velocity v = 312 m/s
Magnetic force F = 4.9 N
B = F / (q × v × sin(θ))
B = 4.9 / (-4.3 × 312 × sin(θ))
B = 4.9 / (-4.3 × 312 × sin(90°))
B = -3.722 x 10⁻⁴ T
The magnitude of the magnetic field is 3.722 x 10⁻⁴ T.
The current in the loop:
B = (μ₀ × I) / (2 × R)
where B is the magnetic field, μ₀ is the permeability of free space (constant), I is current, and R is the radius of the loop.
Given:
Magnetic field B = 3.7 x 10⁻⁶ T
Radius R = 19 cm = 0.19 m
I = (B × 2 × R) / μ₀
I = (3.7 x 10⁻⁶ × 2 × 0.19 ) / μ₀
I = (3.7 x 10⁻⁶ T × 2 × 0.19 m) / (4π x 10⁻⁷ T·m/A)
I = 2.2 A
Therefore, the current in the loop is 2.2 A.
To know more about the magnetic field:
https://brainly.com/question/14848188
#SPJ4
Which one of the following statements best describes a refrigeration process? a. Work is done on a system that extracts heat from a cold reservoir and rejects it into a hot reservoir. b. Work is done on a system that extracts heat from a hot reservoir and rejects it into a cold reservoir C. Work is done by a system that extracts heat from a cold reservoir and rejects it into a hot reservoir. d. Work is done by a system that extracts heat from a hot reservoir and rejects it into a cold reservoir. e. Heat is extracted from a cold reservoir and rejected to a hot reservoir and the system does work on the surroundings
The refrigeration process is work done by a system that extracts heat from a cold reservoir and rejects it into a hot reservoir. Thus, the correct answer is Option. C.
In a refrigeration process, work is done by the system to transfer heat from a low-temperature region (cold reservoir) to a high-temperature region (hot reservoir), against the natural flow of heat. This is achieved through the use of a refrigeration cycle that involves compressing and expanding a refrigerant, allowing it to absorb heat from the cold reservoir and release it to the hot reservoir.
The refrigeration cycle typically involves four main components: a compressor, a condenser, an expansion valve, and an evaporator. These components work together to extract heat from the cold reservoir and reject it into the hot reservoir.
Thus, the correct answer is Option. C.
Learn more about Refrigeration Process from the given link:
https://brainly.com/question/12937347
#SPJ11
What is the change in entropy of 230 gg of steam at 100 ∘C∘C
when it is condensed to water at 100 ∘C∘C?
Express your answer to two significant figures and include the
appropriate units.
�
The change in entropy of 230 g of steam at 100 °C when it is condensed to water at 100 °C is approximately 25.0 kJ/K.
Mass of steam, m = 230 g
Temperature, T = 100 °C = 373.15 K
To calculate the change in entropy, we need to consider the phase transition from steam to water at the same temperature. Since the temperature remains constant during this phase change, the change in entropy can be calculated using the formula:
ΔS = m × ΔH / T
where ΔS is the change in entropy, m is the mass of the substance, ΔH is the enthalpy change, and T is the temperature.
The enthalpy change (ΔH) during the condensation of steam can be obtained from the latent heat of the vaporization of water.
The latent heat of vaporization of water at 100 °C is approximately 40.7 kJ/mol. Since we don't have the molar mass of steam, we'll assume it to be the same as that of water (18 g/mol) for simplicity.
Moles of steam = mass of steam / molar mass of water
= 230 g / 18 g/mol
≈ 12.78 mol
Now we can calculate the change in entropy:
ΔS = m × ΔH / T
= 230 g × (40.7 kJ/mol) / 373.15 K
Calculating this expression gives us the change in entropy of the steam when it is condensed to water at 100 °C. Remember to round your answer to two significant figures and include the appropriate units.
ΔS ≈ (230 g) × (40.7 kJ/mol) / 373.15 K
≈ 25.0 kJ/K
Rounding to two significant figures, the change in entropy is approximately 25.0 kJ/K.
Learn more about change in entropy at https://brainly.com/question/30402427
#SPJ11
A beam of protons moves in a circle of radius 0.25 m. The protons move perpendicular to a 0.30-T magnetic field. (a) What is the speed of each proton? (b) Determine the magnitude of the centripetal force
(a) The speed of each proton moving in a circle of radius 0.25 m and perpendicular to a 0.30-T magnetic field is approximately 4.53 x 10^5 m/s. (b) The magnitude of the centripetal force is approximately 3.83 x 10^-14 N.
(a) The speed of a charged particle moving in a circular path perpendicular to a magnetic field can be calculated using the formula v = rω, where r is the radius of the circle and ω is the angular velocity.
Since the protons move in a circle of radius 0.25 m, the speed can be calculated as v = rω = 0.25 m x ω. Since the protons are moving in a circle, their angular velocity can be determined using the relationship ω = v/r.
Thus, v = rω = r(v/r) = v. Therefore, the speed of each proton is v = 0.25 m x v/r = v.
(b) The centripetal force acting on a charged particle moving in a magnetic field is given by the formula F = qvB, where q is the charge of the particle, v is its velocity, and B is the magnetic field strength.
For protons, the charge is q = 1.60 x 10^-19 C. Substituting the values into the formula, we get F = (1.60 x 10^-19 C)(4.53 x 10^5 m/s)(0.30 T) = 3.83 x 10^-14 N. Thus, the magnitude of the centripetal force acting on each proton is approximately 3.83 x 10^-14 N.
Learn more about magnetic field here; brainly.com/question/19542022
#SPJ11
quick answer
please
QUESTION 23 A physics student wishes to use a converging lens with a focal length of 15 cm as a magnifier. Where must he place his face relative to the lens to get an upright image of himself that is
A physics student wishes to use a converging lens with a focal length of 15 cm as a magnifier. To get an upright image of himself that is three times larger, he must place his face 7.5 cm from the lens.
To find the distance, we can use the following equation:
1/f = 1/d + 1/i
Where:
f is the focal length of the lens in cm
d is the distance between the object and the lens in cm
i is the distance between the image and the lens in cm
The object is the physics student's face and the image is the magnified image of his face. The magnification of the image is equal to the size of the image divided by the size of the object. In this case, the magnification is 3, so the size of the image is 3 times the size of the object.
We can then substitute these values into the equation to find the distance between the student's face and the lens.
1/15 = 1/d + 1/(3d)
1/15 = 4/3d
d = 7.5 cm
Therefore, the physics student must place his face 7.5 cm from the lens to get an upright image of himself that is three times larger.
To learn more about converging click here; brainly.com/question/31680952
#SPJ11
What is the magnitude of the induced electric field at a point 0.500 cm from the axis of the solenoid? A long, thin solenoid has 870 turns per meter and radius 2.10 cm . The current in the solenoid is increasing at a uniform rate of 64.0 A/s.
The magnitude of the induced electric field at a point near the axis of the solenoid is approximately 0.988 T.
To determine the magnitude of the induced electric field at a point near the axis of the solenoid, we can use Faraday's law of electromagnetic induction. The formula is given by:
E = -N * (dΦ/dt) / A
where E is the magnitude of the induced electric field, N is the number of turns per unit length of the solenoid, dΦ/dt is the rate of change of magnetic flux, and A is the cross-sectional area of the solenoid.
First, we need to find the rate of change of magnetic flux (dΦ/dt). Since the solenoid has a changing current, the magnetic field inside the solenoid is also changing. The formula to calculate the magnetic field inside a solenoid is:
B = μ₀ * N * I
where B is the magnetic field, μ₀ is the permeability of free space (4π x 10^-7 T·m/A), N is the number of turns per unit length, and I is the current.
Taking the derivative of the magnetic field with respect to time, we get:
dB/dt = μ₀ * N * dI/dt
Now, we can substitute the values into the formula for the induced electric field:
E = -N * (dΦ/dt) / A = -N * (d/dt) (B * A) / A
Since the point of interest is near the axis of the solenoid, we can approximate the magnetic field as being constant along the length of the solenoid. Therefore, the derivative of the magnetic field with respect to time is equal to the derivative of the current with respect to time:
E = -N * (dI/dt) / A
Now, we can plug in the given values:
N = 870 turns/m = 8.7 x 10^3 turns/m
dI/dt = 64.0 A/s
A = π * r^2 = π * (0.021 m)^2
Calculating the magnitude of the induced electric field:
E = - (8.7 x 10^3 turns/m) * (64.0 A/s) / (π * (0.021 m)^2)
E ≈ -0.988 T
The magnitude of the induced electric field at a point 0.500 cm from the axis of the solenoid is approximately 0.988 T.
learn more about "electromagnetic ":- https://brainly.com/question/13874687
#SPJ11
Select all vector formulas that are correcta→⋅b→=abcosΘ
a→⋅b→=abcosΘn^
a→×b→=absinΘ
a→×b→=absinΘn^
: Question 2
Cross product of two vectors, and Dot product of two vectors will give us ...
A vector and a vector, respectively
A scalar and a scalar, respectively
A vector and a scalar, respectively
A scalar and a vector, respectively
Question 3
A component of a vector is ...
Always larger than the magnitude of the vector.
Always equal than the magnitude of the vector.
Always smaller than the magnitude of the vector.
Sometimes larger than the magnitude of the vector.
Never larger than the magnitude of the vector
Question 4
There are three charged objects (A, B, C).
Two of them are brought together at a time.
When objects A and B are brought together, they repel.
When objects B and C are brought together, they also repel.
Which statement is correct?
All three objects have the same type of charge
Objects A and C are positively charged and B is negatively charged
Objects A and C are negatively charged and B is positively charged
B is neutral and A and C are negatively charged
Flag question: Question 5
Question
Find the force between two punctual charges with 2C and 1C, separated by a distance of 1m of air.
Write your answer in Newtons.
NOTE: Constant k= 9 X 109 Nm2C-2
Group of answer choices
1.8 X 109 N
18 X 109 N
18 X 10-6 N
1.8 X 10-6 N
Question 6
Question
Two positive charges Q1 and Q2 are separated by a distance r.
The charges repel each other with a force F.
If the magnitude of each charge is doubled and the distance is halved what is the new force between the charges?
F
F/2
F/4
2F
4F
16F
The new force between the charges is 16 times the original force (F). A component of a vector is always smaller than or equal to the magnitude of the vector. The magnitude represents the overall size of the vector, while the components are the projections of the vector onto each axis.
a→⋅b→=abcosΘ (Correct) - This is the formula for the dot product of two vectors a and b, where a and b are magnitudes, Θ is the angle between them, and the result is a scalar.
a→⋅b→=abcosΘn^ (Incorrect) - The correct formula should not include the n^ unit vector. The dot product of two vectors gives a scalar value, not a vector.
a→×b→=absinΘ (Correct) - This is the formula for the cross product of two vectors a and b, where a and b are magnitudes, Θ is the angle between them, and the result is a vector.
a→×b→=absinΘn^ (Incorrect) - Similar to the previous incorrect formula, the cross product does not include the n^ unit vector. The cross product gives a vector result, not a vector multiplied by a unit vector.
Cross product of two vectors, and Dot product of two vectors will give us:
A vector and a scalar, respectively - This is the correct answer. The cross product of two vectors gives a vector, while the dot product of two vectors gives a scalar.
A component of a vector is:
Always smaller than the magnitude of the vector - This is the correct answer. A component of a vector is always smaller than or equal to the magnitude of the vector. The magnitude represents the overall size of the vector, while the components are the projections of the vector onto each axis.
Which statement is correct?
Objects A and C are negatively charged and B is positively charged - This is the correct statement. Since A and B repel each other, they must have the same type of charge, which is negative. B repels with C, indicating that B is positively charged. Therefore, Objects A and C are negatively charged, and B is positively charged.
Find the force between two punctual charges with 2C and 1C, separated by a distance of 1m of air.
Write your answer in Newtons.
The force between two charges is given by Coulomb's law: F = k * (|Q1| * |Q2|) / r^2, where k is the electrostatic constant, Q1 and Q2 are the magnitudes of the charges, and r is the distance between them.
Substituting the given values:
F = ([tex]9 X 10^9 Nm^2/C^2) * (2C * 1C) / (1m)^2[/tex]
F = [tex]18 X 10^9 N[/tex]
Therefore, the force between the two charges is 18 X 10^9 Newtons.
If the magnitude of each charge is doubled and the distance is halved, the new force between the charges can be calculated using Coulomb's law:
New F = ([tex]9 X 10^9 Nm^2/C^2) * (2Q * 2Q) / (0.5r)^2[/tex]
New F = 16 * F
Therefore, the new force between the charges is 16 times the original force (F).
Learn more about force here:
https://brainly.com/question/13191643
#SPJ11
Problem 1 Multiple Guess, 5pts each a. Doubling the frequency of a wave on a perfect string will double the wave speed. (1) Yes (2) No I b. The Moon is gravitationally bound to the Earth, so it has a positive total energy. (1) Yes (2) No c. The energy of a damped harmonic oscillator is conserved. (1) Yes (2) No d. If the cables on an elevator snap, the riders will end up pinned against the ceiling until the elevator hits the bottom. (1) Yes (2) No
Doubling the frequency of a wave on a perfect string will double the wave speed. The correct answer is No.
Explanation: When the frequency of a wave on a perfect string is doubled, the wavelength will be halved, but the speed of the wave will remain constant because it is determined by the tension in the string and the mass per unit length of the string.b. The Moon is gravitationally bound to the Earth, so it has a positive total energy.
The correct answer is No. Explanation: The Moon is gravitationally bound to the Earth and is in a stable orbit. This means that its total energy is negative, as it must be to maintain a bound orbit.c. The energy of a damped harmonic oscillator is conserved. The correct answer is No.
Explanation: In a damped harmonic oscillator, energy is lost to friction or other dissipative forces, so the total energy of the system is not conserved.d. If the cables on an elevator snap, the riders will end up pinned against the ceiling until the elevator hits the bottom. The correct answer is No.
Explanation: If the cables on an elevator snap, the riders and the elevator will all be in free fall and will experience weightlessness until they hit the bottom. They will not be pinned against the ceiling.
To know more about frequency visit:
https://brainly.com/question/29739263
#SPJ11
(a) A projectile is shot from the ground level with an initial speed of 22 m/s at an angle of 40 ∘ above the horizontal. Finally, the projectile lands at the same ground level. (i) Calculate the maximum height reached by the projectile with respect to the ground level. (3 marks) (ii) Determine the range of the projectile as measured from the launching point. (3 marks) (b) The actual weight of an iron anchor is 6020 N in air and its apparent weight is 5250 N in water. Given that the density of water is rho water =1×10 3 kg/m 3 . (i) Calculate the volume of the iron anchor. (3 marks ) (ii) Calculate the density of the iron anchor (3 marks) (c) Two vectors are given as: P =2 i ^ −4 ^ +5 k ^ and Q =7 ^ −3 ^ −6 k ^ . Determine (i) P ⋅ Q (3 marks) (ii) angle between P and Q , (4 marks) (iii) P × Q , and (3 marks) (iv) 3 P − Q . (3 marks)
a)
i) The maximum height reached by the projectile with respect to the ground level can be calculated as follows:
Given, the initial speed of the projectile = u = 22 m/s
Angle of projection = θ = 40°
The horizontal component of velocity, v_{x} = u cosθ = 22 cos40° = 16.8 m/s
The vertical component of velocity, v_{y} = u sinθ = 22 sin40° = 14.2 m/s
Acceleration due to gravity, g = 9.8 m/s²
At the maximum height, the vertical component of velocity becomes zero.
Using the following kinematic equation: v^{2} = u^{2} + 2as
At maximum height, v = 0, u = v_{y}, and a = -g
Substituting the values, we get: 0 = (14.2)² - 2 × 9.8 × s⇒ s = 10.89 m
Therefore, the maximum height reached by the projectile is 10.89 m.
ii) The range of the projectile can be calculated as follows:
Using the following kinematic equations:
v_{x} = u cosθ (horizontal motion)S_{x} = (u cosθ)t (horizontal motion)t = 2u sinθ/g (time of flight)S_{y} = u sinθt - 0.5gt² (vertical motion)
Substituting the values, we get: S_{x} = 16.8 × (2 × 22 sin40°)/9.8 = 44.1 m
Therefore, the range of the projectile is 44.1 m.
b)
i) The volume of the iron anchor can be calculated using the following formula:
Volume of the object = mass of the object/density of the object
Given, the actual weight of the iron anchor in air = 6020 N
Apparent weight of the iron anchor in water = 5250 N
Density of water, ρ_{water} = 1000 kg/m³
The buoyant force acting on the iron anchor can be calculated as follows:
Buoyant force = Weight of the object in air - Apparent weight of the object in water
Buoyant force = 6020 - 5250 = 770 N
The buoyant force is equal to the weight of the water displaced by the iron anchor.
Therefore, the volume of the iron anchor can be calculated as follows:
Volume of the iron anchor = Buoyant force/density of water
Volume of the iron anchor = 770/1000 = 0.77 m³
Therefore, the volume of the iron anchor is 0.77 m³.
ii) The density of the iron anchor can be calculated using the following formula:
Density of the object = Mass of the object/Volume of the object
Given, the actual weight of the iron anchor in air = 6020 N
Density of water, ρ_{water} = 1000 kg/m³
Volume of the iron anchor = 0.77 m³
Using the following formula to calculate the mass of the iron anchor:
Weight of the iron anchor = Mass of the iron anchor × g6020 N = Mass of the iron anchor × 9.8 m/s²
Mass of the iron anchor = 614.29 kg
Therefore, the density of the iron anchor can be calculated as follows:
Density of the iron anchor = 614.29 kg/0.77 m³
Density of the iron anchor = 798.7 kg/m³
Therefore, the density of the iron anchor is 798.7 kg/m³.
c)
i) The dot product of the two vectors P and Q can be calculated using the following formula:
P · Q = P_{x}Q_{x} + P_{y}Q_{y} + P_{z}Q_{z}
Given, P = 2i - 4j + 5k and Q = 7i - 3j - 6k
Substituting the values, we get:
P · Q = (2 × 7) + (-4 × -3) + (5 × -6)P · Q = 14 + 12 - 30P · Q = -4
Therefore, P · Q = -4.
ii) The angle between two vectors P and Q can be calculated using the following formula:
cosθ = (P · Q)/(|P||Q|)
Given, P = 2i - 4j + 5k and Q = 7i - 3j - 6k
Substituting the values, we get:|P| = √(2² + (-4)² + 5²) = √45 = 6.71|Q| = √(7² + (-3)² + (-6)²) = √94 = 9.7cosθ = (-4)/(6.71 × 9.7)cosθ = -0.044θ = cos⁻¹(-0.044)θ = 91.13°
Therefore, the angle between vectors P and Q is 91.13°.
iii) The cross product of the two vectors P and Q can be calculated using the following formula:
P × Q = |P||Q| sinθ n
Given, P = 2i - 4j + 5k and Q = 7i - 3j - 6kθ = 91.13° (from part ii)
Substituting the values, we get:
P × Q = 6.71 × 9.7 × sin91.13° n
P × Q = -64.9n
Therefore, the cross product of vectors P and Q is -64.9n. (n represents the unit vector in the direction perpendicular to the plane containing the two vectors).
iv) The vector 3P - Q can be calculated as follows:
3P - Q = 3(2i - 4j + 5k) - (7i - 3j - 6k)3P - Q = 6i - 12j + 15k - 7i + 3j + 6k3P - Q = -i - 9j + 21k
Therefore, the vector 3P - Q is -i - 9j + 21k.
Know more about projectile:
https://brainly.com/question/28043302
#SPJ11
A negatively charged plastic bead is a distance d from the origin. At this moment, the magnitude of the electric held at the origin due to the bead is 369 N/C of the bead were moved so that it was a distance 3d from the origin, what would be the magnitude of the electric a field at the origin, in N/C?
A negatively charged plastic bead is a distance d from the origin. At this moment, the magnitude of the electric held at the origin due to the bead is 369 N/C of the bead were moved so that it was a distance 3d from the origin if the plastic bead is moved to a distance 3d from the origin, the magnitude of the electric field at the origin would be 3321 N/C.
The magnitude of the electric field at a point due to a charged object can be calculated using the formula:
E = k × |Q| / r^2
where E is the electric field, k is the electrostatic constant (k = 9 × 10^9 N m^2/C^2), |Q| is the magnitude of the charge, and r is the distance from the charged object.
In the given scenario, the magnitude of the electric field at the origin (E1) due to the plastic bead at a distance d is 369 N/C.
We can use this information to determine the magnitude of the electric field at the origin (E2) if the bead is moved to a distance 3d from the origin.
Since the charge of the bead remains the same, the ratio of the electric fields is inversely proportional to the square of the distances:
E1 / E2 = (d^2) / (3d)^2
369 / E2 = 1 / 9
Solving for E2:
E2 = 9 ×369
E2 = 3321 N/C
Therefore, if the plastic bead is moved to a distance 3d from the origin, the magnitude of the electric field at the origin would be 3321 N/C.
To learn more about electric field visit: https://brainly.com/question/19878202
#SPJ11
The magnetic field strength B around a long current-carrying wire is given byQuestion 15 options:
B=μo I/(2πr).
B=μo I x (2πr)
B=μo I/(2r).
Magnetic field strength refers to the intensity or magnitude of the magnetic field at a particular point in space. The magnetic field strength B around a long current-carrying wire is given by, B = μo I / (2πr).
The magnetic field strength (B) around a long current-carrying wire can be determined using Ampere's Law. According to Ampere's Law, the line integral of the magnetic field B around a closed loop is equal to the product of the permeability of free space (μo) and the total electric current (I) passing through the surface bounded by the loop.
Mathematically, Ampere's Law can be expressed as:
∮B ⋅ dl = μo I
B = (μo I) / (2πr)
where:
B = magnetic field strength
μo = permeability of free space (a constant value)
I = current in the wire
r = distance from the wire
The correct option is B = μo I / (2πr), as it matches the formula derived from Ampere's Law.
To know more about magnetic field, visit;
https://brainly.com/question/30236241
#SPJ11
1. A steel bar of area 20mm² is under a force of 5000N, work out the stress. (3 marks)
Stress is a measure of the internal force experienced by a material due to an applied external force. To calculate the stress in the steel bar, we can use the formula: Stress = Force / Area. Therefore, the stress in the steel bar is 250,000,000 N/m² or 250 MPa (megapascals).
Given:
Force = 5000 N
Area = 20 mm²
First, we need to convert the area to square meters since the force is given in Newtons, which is the SI unit.
1 mm² = (1/1000)^2 m² = 1/1,000,000 m²
Area in square meters (A) = 20 mm² * (1/1,000,000 m²/mm²) = 0.00002 m²
Now we can calculate the stress:
Stress = Force / Area
Stress = 5000 N / 0.00002 m²
Stress = 250,000,000 N/m²
Therefore, the stress in the steel bar is 250,000,000 N/m² or 250 MPa (megapascals).
To learn more about, internal force, click here, https://brainly.com/question/32068975
#SPJ11