The statement that best explains what is shown in their data is option D. The beautyberry increases its chances of reproduction because its berries do not all become ripe at the same time.
What is the beautyberry about?The data shows that the number of ripe berries and unripe berries varies from month to month, with the most ripe berries in April and the least in December.
This indicates that the beautyberry does not have all of its berries ripen at the same time, which increases the chances of some of them being eaten and spread by animals. This would help increase the chances of the beautyberry reproducing and spreading to new locations.
Therefore, It does not seem from the data provided that it relies on wind to spread its seeds or that it relies on one type of animal to eat the berries, or it uses asexual reproduction to make new plants.
Learn more about beautyberry from
https://brainly.com/question/26027910
#SPJ1
In the basketball experiment, what does
the different materials represent?
Control variable?
dependent variable?
independent variable?
As the earth rotates on its axis, the constellations and stars in them appear to
The Ksp of SrSO4 is 3. 2 x 10^-7. What is the equilibrium concentration of a sulfate ion in a 1. 0 Dash L solution of strontium sulfate which 0. 10 mol of Sr(CH3CO2)2 has been added?
The equilibrium concentration of a sulfate ion is 32× 10⁻⁶M can be added in a 1. 0 Dash L solution of strontium sulfate which is 0. 10 mol of Sr(CH3CO₂)₂.
Solubility is defined as the maximum amount of a solute that can be dissolved in a known quantity of the solvent at a certain temperature is its solubility.
The solubility of SrSO₄ is:
SrSO₄(s) → Sr²⁺(aq) + SO₄²⁻(aq)
Where Ksp is defined as:
Ksp = 3.2x10⁻⁷ = [Sr²⁺] [SO₄²⁻]
The concentration of Sr is:
0.10mol / 1L = 0.10M = [Sr²⁺]
Replacing in Ksp:
3.2x10⁻⁷ = [0.10M] [SO₄²⁻]
[SO₄²⁻] = 3.2x10⁻⁶M
To know more about solubility here
https://brainly.com/question/28170449
#SPJ4
Name the sub atomic particles in part Z of a boron atom.Give the relative charges of these sub atomic
Answer:
proton 5+
electron 5-
neutron 0, neutral
Explanation:
Boron is the fifth element on the periodic table, meaning it's atomic# is 5. that is the # of protons. Protons have a positive chargé. The # of electrons in a neutrally charged atom is the same as the # of protons, because they're negatively charged. so if there are 5 protons, there are 5 electrons +5 + -5 = 0 chargé. The third subatomic particle is a neutron. It has a charge of 0, neutral, thus its name. You know there are 6 neutrons in a Boron atom because the atomic mass is 11. electrons have basically no weight, so 11 - 5 protons = 6 neutrons.
The subatomic particles in part Z of the boron atom are neutrons and protons. neutrons have a charge of zero while protons have a charge of +1. Note that Z represents the core of the boron atom.
The atom is composed of three fundamental subatomic particles which are;
ElectronsProtonsNeutronsProtons and neutrons are found at the core of the atom. This core is the center of the atom. The protons and neutrons are found inside the nucleus or core of the atom and are collectively called nucleons. Electrons move round the orbits of the atom.
Protons are positively charged, electrons are negatively charged while neutrons have no charge.
Part Z is the nucleus or core of the atom and contains neutrons and protons.
Learn more: https://brainly.com/question/23453530
Help would be greatly appreciated
How many moles of Zn(NO3)2 form from 7.0 mol AgNO3?
The correct answer is 7.0 moles of AgNO3 will form 7.0 moles of Zn(NO3)2,
What is mole ratio?Mole ratio is the ratio between the number of moles of two substances that are involved in a chemical reaction. It is an important concept in stoichiometry, which is the study of the relationship between the amounts of reactants and products in a chemical reaction. Mole ratio is often expressed as a fraction, in which the numerator is the number of moles of one substance, and the denominator is the number of moles of the other substance.
Since the reaction is a 1:1 mole ratio of reactant to product:
AgNO3 → Zn(NO3)2
7.0 mol AgNO3 → 7.0 mol Zn(NO3)2
To learn more about mole ratio
https://brainly.com/question/19099163
#SPJ1
Two spherical objects have masses of 8,000 kg and 5.0 kg. Their centers are separated by a distance of 1.5 m. Find the gravitational attraction between them.
The gravitational force of attraction between the two objects would be 1.1858 x [tex]10^{-6[/tex] Newton.
Gravitational forceThe gravitational force of attraction between two objects of mass m1 and m2 is proportional to the product of the masses of the two objects and inversely proportional to the square of the distance between the two objects.
This is mathematically expressed as follows:
Gravitational force (F) = [tex]Gm_1m_2/d^2[/tex]
Where G is the universal gravitational constant and d is the distance separating the two masses.
In this case:
m1 = 8,000 kg
m2 = 5.0 kg
G = 6.67 x [tex]10^{-11[/tex] N m2 / kg2
d = 1.5 m
F = 6.67 x [tex]10^{-11[/tex] x 8,000 x 0.5/1.5 x 1.5
= 26680 x [tex]10^{-11[/tex]/2.25
= 11857.77 x [tex]10^{-11[/tex]
= 1.1858 x [tex]10^{-6[/tex] Newton
In other words, two spherical objects of masses 8,000 kg and 5.0 kg separated by a distance of 1.5 would have a gravitational force of attraction of 1.1858 x [tex]10^{-6[/tex] Newton between them.
More on the gravitational force of attraction can be found here: https://brainly.com/question/10405569
#SPJ1
What is the purpose of photosynthesis?
make glucose
make light
release carbon dioxide
none of the above
Answer:
make glucose
Explanation:
During photosynthesis, plants trap light energy with their leaves. Plants use the energy of the sun to change water and carbon dioxide into a sugar called glucose. Glucose is used by plants for energy and to make other substances like cellulose and starch
Pls Help!
No links Please!
I also want an explanation
I will give brainliest
Answer:
uhhhhh not sure i cant see it
Explanation:
Write a balanced net ionic equation for a redox reaction that results in the formation of potassium chloride. (Assume that potassium chloride is not a starting material, and assume the reaction takes place in aqueous solution.)
2K + [tex]Cl_{2}[/tex] = 2KCl is the balanced net ionic equation for a redox reaction that results in the formation of potassium chloride.
Chlorine gas, Cl 2, will cause potassium metal, K, to burn, forming potassium chloride, KCl, an ionic molecule. This synthesis reaction is described by the following balanced chemical equation.
2K + [tex]Cl_{2}[/tex] = 2KCl
Consider this reaction to be a redox reaction as an alternative mental image. Here, chlorine gas is oxidizing potassium metal to produce potassium cations. Chlorine gas is converted into chloride anions during the process. The subsequent reaction between the potassium actions and the chloride anions will result in potassium chloride.
Learn more about Redox Reaction
brainly.com/question/13293425
#SPJ4
The solid xy decomposes into gaseous x and y: xy(s) m x(g) + y(g) kp = 4. 1 (at 0 °c) if the reaction is carried out in a 22. 4 l container, which initial amounts of x and y will result in the formation of solid xy?
The initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.
What is initial amount?The initial amount is the starting point for any financial transaction.
In order to calculate the initial amounts of x and y that will result in the formation of solid xy, the following equation must be used:
nx = ny * (4.1/kp)
where nx and ny are the moles of x and y, respectively, and kp is the equilibrium constant of the reaction.
Given the information provided, we can calculate the moles of x and y:
nx = ny * (4.1/4.1) = ny
ny = (22.4 L * 1 mol/22.4 L) = 1 mol
Therefore, nx = 1 mol and ny = 1 mol.
This means that if the reaction is carried out in a 22.4 L container, the initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.
To learn more about initial amount
https://brainly.com/question/26988374
#SPJ4
Mr. Peter's apartment is on the 4th floor of his apartment building. He just purchased a new piano, and the only way to move it into his apartment is with a crane. A crane suspends the 150 kilogram piano 35 meters in the air, What is the piano's potential energy?
Answer:
im here for the points
Explanation:
HAHA
If the half-life of an isotope is 50 years, calculate the percent of original radioactive atoms that remain radioactive after 200 years.
A
none
B
50%
C
12.5%
D
6.25%
Answer:
A. none
Explanation:
after 200 years, it would be 100 years gone
50+50=100
Where is hydroelectric energy used?
Hydroelectric energy is a renewable form of energy used to generate electricity.
This energy is created by harnessing the power of moving water, typically from rivers and streams, to spin turbines and generate electricity.
Hydroelectric power plants are used to generate electricity for homes, businesses, and cities all over the world.
By utilizing the natural power of water, hydroelectric energy is a clean, safe, and reliable source of energy that helps reduce global carbon emissions. It is also a cost-effective energy source, making it a popular choice for many energy providers.
Hydroelectric energy is one of the most widely used sources of electricity in the world, with many countries heavily relying on it for their energy needs.
To learn more about hydroelectric, click here:
https://brainly.com/question/2321474
#SPJ4
The table below describes geological events.
Event Boundary where they occur
Convergent Divergent Transform
A Yes Yes No
B Yes Yes Yes
Which statement is most likely correct? (1 point)
a
Event A represents earthquakes and Event B represents volcanic eruptions.
b
Event A represents volcanic eruption and Event B represents earthquakes.
c
Event A represents formation of ocean basins and Event B represents earthquakes.
d
Event A represents earthquakes and Event B represents formation of ocean basins.
Based on this table which describes geological events, a statement that is most likely correct include the following: B. Event A represents volcanic eruption and Event B represents earthquakes.
What is a divergent boundary?Generally speaking, a divergent boundary is characterized by plates that are moving apart from one another, as well as basaltic volcanism and seafloor spreading. Also, a typical example of a divergent is the Mid-Atlantic Ridge.
In this context, we can reasonably infer and logically deduce that Event A is a geological event which most likely represents volcanic eruption because it occurred at both convergent and divergent boundary.
Furthermore, a convergent boundary simply refers to a region where lithosphere or crust is sinking into the mantle. Also, an example of a convergent is a region where subduction zones or collisions occur such as the west coast of South America.
In conclusion, a transform boundary simply refers to a boundary that is normally devoid of volcanism, but allows for the occurrence of earthquakes.
Read more on earthquakes here: brainly.com/question/248561
#SPJ1
At 161 K, SiH4 boils but SiO2 remains as a solid. Using principles of interparticle forces, explain the difference in boiling points.
The boiling point of a substance is determined by the strength of the interparticle forces between molecules.
What is boiling point?Boiling point is the temperature at which a liquid changes state from liquid to gas, also known as its vaporization point. The boiling point of water at sea level is 100°C (212°F).
In the case of SiH4, the boiling point is higher than that of SiO2 due to the stronger nature of the intermolecular forces. This is because SiH4 is held together by stronger hydrogen bonds, resulting in more energy needed to break apart the molecules. On the other hand, SiO2 is held together by weaker dipole-dipole interactions and London dispersion forces, meaning it requires less energy to break apart the molecules and thus has a lower boiling point.
To learn more about boiling point
https://brainly.com/question/14008526
#SPJ4
An oxide of chromium crystallizes with the following unit cell (chromium = gray; oxygen = red)(Figure 1) .
What is the formula of the oxide?
An oxide of chromium crystallizes with the following unit cell (chromium = gray; oxygen = red)(Figure 1) --CrO3
In order to determine the formula of the oxide, we need to determine the ratio of chromium to oxygen atoms in the unit cell. From the provided unit cell, we can see that there is one chromium atom (gray) in the center of the unit cell, and four oxygen atoms (red) surrounding it. This gives us a ratio of 1:4 chromium to oxygen, which simplifies to a ratio of 1:4 or 1/5. Therefore, the formula of the oxide is CrO4.An oxide is a chemical compound that contains at least one oxygen atom and one other element. Oxides can be either inorganic or organic, depending on the element that is combined with oxygen. Inorganic oxides are compounds composed of a metal and oxygen. They can be further classified as acidic, basic or neutral depending on the oxidation state of the metal atom. Examples of inorganic oxides include water (H2O), carbon dioxide (CO2), sulfur dioxide (SO2), and nitrogen dioxide (NO2)
To learn more about oxide here:
https://brainly.com/question/9496279
#SPJ4
A mixture of three gases has a total pressure of 365 mmHg. Gas A contributes a pressure of 53 mmHg and gas B contributes a pressure 185 mmHg. What is the partial pressure of gas C?
If you give explanation and answer, I will give you brainliest answer. :)
In the last minute rush to assemble the demonstration, your teacher spills the lead chloride all over their sandwich and is left with 57.2 grams in the bottle. How much potassium iodide should be weighed out to convert all of the lead chloride to product?
A container contains a mixture of hydrogen, oxygen, fluorine, chlorine and nitrogen gases. The pressure of hydrogen is 85.42kPa. The pressure of oxygen is 3.2kPa. The pressure of fluorine is 22.65kPa. The pressure of chlorine is 55.4kPa. The pressure of nitrogen is 65.3kPa. What is the total pressure of the container
Answer: The total pressure of the container is 231.97 kPa.
Explanation:
Given: [tex]P_{H_{2}} = 85.42 kPa[/tex], [tex]P_{O_{2}} = 3.2 kpa[/tex]
[tex]P_{F_{2}} = 22.65 kPa[/tex], [tex]P_{Cl_{2}} = 65.3 kPa[/tex]
Total pressure is the sum of pressure of each component of the gas present in a vessel or container.
Hence, total pressure of the container is calculated as follows.
[tex]P_{total} = P_{H_{2}} + P_{O_{2}} + P_{F_{2}} + P_{Cl_{2}} + P_{N_{2}}\\= 85.42 kPa + 3.2 kPa + 22.65 kPa + 55.4 kPa + 65.3 kPa\\= 231.97 kPa[/tex]
Thus, we can conclude that the total pressure of the container is 231.97 kPa.
Propane gas (C3H8) is ignited. Type of reaction ________ ignition ___________________ Balanced chemical equation:
Propane gas (C3H8) is ignited. Type of reaction combustion ignition.
[tex]C_3H_8(g)+5O_2(g) < = > 3CO_2(g)+4H_2O(l)[/tex] Balanced chemical equation.
A balanced chemical reaction is what?A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and the change are both equal.
Propene is an alkene because why?The parent chain is the longest chain of carbon atoms that contains the double bond. Its name has the same stem as an alkane with the same number of carbon atoms, but it is designated as an alkene by adding the suffix -ene. Propene is the resultant chemical, CH2=CHCH3.
What does a balanced chemical equation entail?In accordance with the Law of Conservation of Mass, mass cannot be generated or destroyed in a chemical reaction. A balanced chemical equation has an equal number of atoms of each element on the left and right sides of the reaction.
To know more about chemical reaction visit:
https://brainly.com/question/11231920
#SPJ4
Match each item with the correct statement below.
Column A
1. Fluorine, bromine, or iodine
2. An element found in Group 1 of the periodic table
3. Sodium or cesium:
4. An element found in Group 17:
5. Magnesium or barium:
6. An element found in Group 2:
An element found in Group 2
Column B
a. Alkali metal
b. Alkaline earth metal
c. Halogen
Answer:
Explanation:
Flourine, bromine or iodine --> HalogenAn element found in group 1 of the periodic table --> Alkali metalSodium or cesium --> Alkali metalAn element found in group 17 --> HalogenMagnesium or Barium --> Alkaline earth metalAn elment found in group 2 --> Alkaline earth metalIn a given reaction, the rate may be expressed as either rate What must be true about X or Y if the reaction is proceeding in the forward direction
In a given reaction, the rate may be expressed as either the rate of formation of a product (X) or the rate of consumption of a reactant (Y). If the reaction is proceeding in the forward direction, the rate of formation of the product (X) will be positive and the rate of consumption of the reactant (Y) will be negative.
This means that X is being produced at a faster rate than it is being consumed and Y is being consumed at a faster rate than it is being produced.
Alternatively, if the reaction proceeds in the opposite direction, the rate of formation of products (X) is negative and the rate of consumption of reactants (Y) is positive. This means that X is consumed faster than it is produced, and Y is produced faster than it is consumed.
Learn more about the rate of reaction here: https://brainly.com/question/24795637
#SPJ4
The isotope of iodine with mass number 128 undergoes beta decay with a half-life of 25.00 minutes. The balanced nuclear reaction for this process is:
Beta decay occurs with a half-life of 25 minutes for the iodine isotope with mass number 128. For this procedure, 3→Te + iB is the balanced nuclear reaction.
Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei) and position in the periodic table (and, therefore, belong to the same chemical element). However, isotopes have different nucleon numbers (mass numbers) because they have varying numbers of neutrons in their nuclei. All isotopes of a given element have nearly identical chemical properties, but they differ in terms of atomic mass and physical characteristics.
The word "isotope" is derived from the Greek words isos, which means "equal," and topos, which means "place," meaning "the same location." The name refers to the fact that different isotopes of the same element occupy the same spot on the periodic table.
Learn more about isotope here:
https://brainly.com/question/12955625
#SPJ4
Given the equation below, What is the reducing agent?
NOTE: Only enter the element symbol. For instance: K, or Cr, or
O, or H.
K2Cr2O3 + H2O + S --> SO2 + KOH + Cr2O3
Answer:
Reducing agent - S
Explanation:
The equation for the reaction is given as;
K2Cr2O3 + H2O + S --> SO2 + KOH + Cr2O3
The balanced equation is given as:
2K2Cr2O7 + 2H2O + 3S → 3SO2 + 4KOH + 2Cr2O3
The reducing agent can be obtained by comparing the oxidation number of the elements. Increase in oxidation number signifies a reducing agent
K:
Reactant - 1
Product - 1
Cr
Reactant - +2
Product - +3
O
Reactant - -2
Product - -2
H
Reactant - +1
Product - +1
S
Reactant - O
Product - +4
S has an increase in oxidation number hence it is the reducing agent.
Although Cr has an increase in oxidation number, it occurs as a compound.
3. Nicotine, the addictive drug in cigarettes, contains 74.0% carbon, 8.6% hydrogen,
and 17.3% nitrogen. What mass of each element can be recovered from a 55.0-
gram sample of nicotine?
Answer:
the mass of each element can be recovered from is 162.23 grams
Explanation:
the mass really depends on the volume. If there is 74.0% carbon, 8.6% hydrogen and 17.3% nitrogen then you first cross out the 0 and 3 which leaves you with 17% and 74%. Then all you have to do is multiply 17% and 74% and then divided it by 8.6%.
The various drugs such as the nicotine as additive drug is a pack of cigarette consist of about 75 of the carbon, 8.6% of hydrogen and about 17.3% of mitogen.
The M of each elements that can recovered which is 162.23 gM really depends on the volume, then you 1st cross out the 0 and 3 which leaves you with 17% and 74%. Then we have to do is multiply 17% and the 74% and divided it by the 8.6%.Learn more about the addictive drug.
brainly.com/question/2210950.
How is Petroleum extracted? How do humans use it? What are the benefits?
Which of these statements is true about the two graphed parallelograms?
Answer:
They are similar, because one can be obtained by dilating the other about the origin with a scale factor of 1/2.
Explanation:
The dilation of a shape is similar to the original shape; this is because the corresponding side lengths are proportional.A scale factor is how many times larger or smaller the image will be relative to the preimage. In other words, multiply the x and y-coordinates by the scale factor to get the coordinate points of the image.The image is dilated by 1/2.
Take a look.
The coordinate labels of the preimage include: A, B, C, and D.
The coordinate labels of the image include: A', B', C', and D'.
Coordinates of point A: (2, 8)
Coordinates of point A': (1, 4)
**The preimage's x and y-coordinates multiplied by 1/2 will give you the x and y-coordinates of the image.**
What are the 4 parts of an element box?
The element box contains name and symbol of the element, number of protons and electrons, atomic mass, and electron configuration.
Each key incorporates an detail's name, precise symbol, atomic weight and atomic variety. Oxygen, for example, has an atomic variety of 8, an atomic weight of 15.996 and a completely unique symbol, O. Each container represents an detail and incorporates its atomic size, symbol, common atomic mass, and (sometimes) name. The factors are organized in seven horizontal rows, referred to as intervals or series, and 18 vertical columns, referred to as groups. The container containing every detail's records is called the detail key. The table is split into 4 more or less square regions referred to as blocks. The rows of the desk are referred to as intervals, and the columns are referred to as groups. Elements from the equal institution of the periodic table display comparable chemical characteristics.
To learn more about periodic table check the link below:
brainly.com/question/15987580
#SPJ4
How do you find the number of grams in 1.204 moles of [tex]NH3[/tex]?
Answer:
[tex]\boxed {\boxed {\sf 20.51 \ g \ NH_3}}[/tex]
Explanation:
If we want to convert from moles to grams, we must use the molar mass. This values tells us the mass of 1 mole of a substance. They can be found on the Periodic Table; they are equivalent to the atomic masses, but the units are grams per mole (g/mol) instead of atomic mass units (amu).
1. Molar MassWe have the compound ammonia or NH₃. Look up the molar masses for the individual elements.
Nitrogen (N): 14.007 g/mol Hydrogen (H): 1.008 g/molCheck for subscripts. There is a subscript of 3 after hydrogen. This means there are 3 atoms of hydrogen in 1 molecule of ammonia. We should multiply hydrogen's molar mass by 3.
H₃= 1.008 * 3=3.024 g/molAdd nitrogen's molar mass.
NH₃: 14.007 + 3.024=17.031 g/mol2. Convert Moles to GramsNow, use the molar mass as a ratio.
[tex]\frac {17.031 \ g \ NH_3}{1 \ mol \ NH_3}[/tex]
Since we are trying to find the mass of 1.204 moles, we multiply by that value.
[tex]1.204 \ mol \ NH_3 *\frac {17.031 \ g \ NH_3}{1 \ mol \ NH_3}[/tex]
The units of "moles of ammonia" cancel.
[tex]1.204 *\frac {17.031 \ g \ NH_3}{1}[/tex]
The denominator of 1 can be ignored.
[tex]1.204 * 17.031 \ g \ NH_3[/tex]
[tex]20.505324 \ g \ NH_3[/tex]
3. RoundThe original measurement of moles has 4 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place.
20.505324The 5 in the thousandth place tells us to round to 0 to a 1 in the hundredth place.
[tex]20.51 \ g \ NH_3[/tex]
1.204 moles of ammonia is equal to 20.51 grams of ammonia.
What mass of mgo is produced from 2.00 moles of mg ? Mg +02 mgo