a certain substance has a heat of vaporization of 50.39 kj/mol. 50.39 kj / mol. at what kelvin temperature will the vapor pressure be 5.00 5.00 times higher than it was at 299 k? 299 k?

Answer: Liquids are anisotropic because their properties are independent of the axis of testing. This statement is FALSE.

Anisotropy is the property of being directionally dependent, implying various qualities in various directions. In contrast to isotropy, which implies properties that are the same regardless of the direction of measurement. As a result, liquids are isotropic, indicating that their qualities do not differ based on the testing axis.

A material is anisotropic if its mechanical or physical properties differ depending on the direction of measurement. Solids, for example, can be anisotropic. When evaluating solids, it's frequently necessary to be aware of this property, which can have an impact on the data gathered during testing.

Therefore, liquids are not anisotropic because their properties are not dependent on the axis of testing. The correct statement is "Liquids are isotropic because their properties do not depend on the axis of testing."


Learn more about Anisotropy here:

https://brainly.com/question/28379789#



#SPJ11

Hydrogen gas and oxygen gas are produced at the cathode and anode, respectively when a solution of Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes.

When a solution of Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes, the following reaction takes place:

2H₂O(l) + 2e- ⟶  H₂(g) + 2OH⁻(aq)

Na₂SO4 (solute) dissociates into ions, i.e., Na+ and SO₄²⁻ in the solution.

When the current is passed through this solution, the positively charged sodium ions migrate towards the negative electrode, i.e., the cathode, whereas the negatively charged sulfate ions migrate towards the positive electrode, i.e., the anode.

At the cathode, the hydrogen ion accepts electrons from the cathode and reduces to hydrogen gas. At the anode, the sulfate ion releases electrons to the anode and oxidizes to form oxygen gas.

The following are the balanced equations for these reactions:

2H⁺(aq) + 2e⁻ ⟶ H₂(g)

SO₄²⁻(aq) ⟶ O₂(g) + 4e⁻

Phenolphthalein is a pH indicator, and its color changes from colorless to pink as the pH increases above 8.2. When Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes, the solution initially turns pink at the anode because OH⁻ ions are produced in excess, which increases the pH beyond 8.2.

However, at the cathode, the concentration of OH⁻ ions decreases as they react with the H+ ions to form water molecules. As a result, the solution around the cathode becomes acidic, and the pink color of phenolphthalein fades away.

Therefore, when a solution of Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes, hydrogen gas, and oxygen gas are produced at the cathode and anode, respectively. The pink color of phenolphthalein fades away at the cathode due to the decrease in OH- concentration.

To know more about Hydrogen, refer here:

https://brainly.com/question/29765115#

#SPJ11

75 mL of 0.50 M H₂SO₄ solution will be required to completely neutralize 3.0 grams of NaOH.

The balanced chemical equation for the reaction between sulfuric acid (H₂SO₄) and sodium hydroxide (NaOH) will be:

H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O

From the equation, we can see that 1 mole of sulfuric acid reacts with 2 moles of sodium hydroxide.

First, we need to calculate the number of moles of NaOH present in 3.0 grams:

moles of NaOH = mass/molar mass

moles of NaOH = 3.0 g / 40.00 g/mol (molar mass of NaOH)

moles of NaOH = 0.075 mol

Since 1 mole of H₂SO₄ reacts with 2 moles of NaOH, the number of moles of H₂SO₄ required to neutralize 0.075 moles of NaOH is:

moles of H₂SO₄ = 0.075 mol / 2 = 0.0375 mol

Now, we can use the definition of molarity to calculate the volume of 0.50 M H₂SO₄ required to provide 0.0375 moles of H₂SO₄:

Molarity = moles of solute/volume of solution (in liters)

Volume of solution = moles of solute/Molarity

Volume of solution = 0.0375 mol / 0.50 mol/L

Volume of solution = 0.075 L or 75 mL

To know more about Volume here

https://brainly.com/question/1578538

#SPJ4

The answer is approximately 52.01 g. Moles are important in chemistry because they allow chemists to convert between the mass, volume, and number of entities of a substance.

What is Mole?

In chemistry, mole is a unit used to measure the amount of a substance. One mole of a substance contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in exactly 12 grams of carbon-12. This number is known as Avogadro's number, which is approximately 6.02 x 10^23 entities.

The given expression is:

1.2 N2 (2 mol NaN3 / 3 N2) x (65.011g / 1 mol. NaN3)

First, we can simplify the ratio of moles of NaN3 to moles of N2:

2 mol NaN3 / 3 mol N2

This can be simplified further by dividing both numbers by the greatest common factor, which is 1:

2/3 mol NaN3 / 1 mol N2

Now we can substitute this value into the expression:

1.2 N2 x (2/3 mol NaN3 / 1 mol N2) x (65.011g / 1 mol. NaN3)

Next, we can cancel out the units of mol N2 and mol NaN3, leaving us with:

1.2 x 2/3 x 65.011g

Multiplying these values together, we get:

52.00968 g

Therefore, the answer is approximately 52.01 g.

Learn more about Mole from given link

https://brainly.com/question/26150306

#SPJ1

When a lab technician adds 0.20 mol of NaF to 1.00 L of 0.35 M cadmium nitrate, Cd(NO3)2, the correct statement is that B) The solubility of cadmium fluoride is increased by the presence of additional fluoride ions.

The solubility of salts is influenced by the presence of anions.

The solubility of salts is increased by the presence of anions in some cases. Anions reduce the solubility of salts in other cases. Cadmium nitrate (Cd(NO3)2) has a Ksp of 6.44 × 10−3, which must be compared to the ion product (IP) for Cd(NO3)2 in solution to decide whether precipitation will occur. Cd(NO3)2 is a soluble salt that ionizes according to the following equation:

Cd(NO3)2 → Cd2+ + 2 NO3−.

According to the solubility product rule, the IP for Cd(NO3)2 is determined as IP = [Cd2+][NO3−]^2. Because cadmium fluoride (CdF2) is less soluble than cadmium nitrate, it must be compared to the IP for CdF2 in solution to decide whether precipitation will occur. The ion product (IP) for CdF2 in solution can be calculated using the stoichiometry of the equilibrium between Cd2+ and F− ions: Cd2+(aq) + 2F−(aq) → CdF2(s).

Thus, IP = [Cd2+][F−]^2. As a result, the addition of fluoride ions to the Cd(NO3)2 solution in the form of NaF increases the solubility of cadmium fluoride because the concentration of F− ions is increased. As a result, option B is correct.

Learn more about solubility at

https://brainly.com/question/28170449

#SPJ11

The lysosome is the organelle that is formed when an endosome, containing hydrolytic enzymes necessary for the digestion of the materials, reaches a low pH of approximately 4.5.

Lysosomes are sac-like vesicles with single membranes that enclose hydrolytic enzymes that can break down biomolecules. Lysosomal enzymes work best in acidic environments and thus the pH of the lysosome is around 4.5, which is slightly acidic. The formation of lysosomes begins with the formation of endosomes.

Endosomes form through the process of endocytosis. In endocytosis, the cell membrane invaginates and surrounds a portion of the extracellular fluid, thereby forming a small vesicle, called a primary endosome. Primary endosomes mature into late endosomes by fusing with other primary endosomes or with other vesicles.

Late endosomes then mature into lysosomes by undergoing changes in the structure of their membranes that facilitate the mixing of hydrolytic enzymes with the material to be digested. In summary, lysosomes are organelles that contain hydrolytic enzymes that can break down biomolecules.

They form when endosomes reach a low pH of approximately 4.5. The formation of lysosomes begins with the formation of endosomes that mature into late endosomes and then into lysosomes. The pH of lysosomes is acidic, around 4.5.

To know more about lysosome, refer here:

https://brainly.com/question/14033260#

#SPJ11

Answer:

h2-+2945-5456vjemrnfn

The given statement "As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases" is A. true  because When a central atom is attached to more oxygen atoms, its oxidation state decreases. According to the rules of oxidation states, oxygen always has an oxidation state of -2 in almost all its compounds.

Therefore, if we know the oxidation state of oxygen in a compound, we can easily find the oxidation state of the central atom. In compounds that have a central atom and multiple oxygen atoms attached to it, the oxidation state of the central atom is equal to the sum of the oxidation states of all the attached oxygen atoms. For instance, in sulfuric acid (H2SO4), the oxidation state of sulfur is +6, while the oxidation state of each oxygen atom is -2. So, if we have more than one oxygen atom, the sum of their oxidation numbers will be greater than -2, which in turn causes the oxidation state of the central atom to decrease as compared to its original value. Therefore, the statement  As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases Therefore the correct option is A.

The complete question is :

As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases.

a True

b False

Know more about oxidation state   here:

https://brainly.com/question/25551544

#SPJ11

The stream having pH 4.5 is acidic in nature.  The reason behind this is likely due to the presence of organic acids.

pH is defined as the hydrogen ion concentration of a solution. If the pH of a solution is below 7 it is considered to be acidic, if it is 7 then it is neutral and pH above 7 is considered to be basic in nature.

Water in streams contains many organic acids, acidic sulphates and nitrates which have a low buffering capacity. Acidic streams occur mostly in  the hilly areas and this acidic water is highly corrosive in nature.

To know more about pH here

https://brainly.com/question/30691408

#SPJ4

The concentration of caffeine in the solution is 55.55 mm. To calculate this, we need to use the formula for molarity: molarity = (moles of solute) / (liters of solution). In this case, we have 25.0 grams of caffeine (C8H10N4O2), which is equal to 0.015 moles (using the molar mass of caffeine). We also have a total solution volume of 0.450 liters. Plugging this into the equation above gives us molarity = (0.015 moles of solute) / (0.450 liters of solution), which simplifies to 55.55 mm.

In terms of explanation, molarity is a unit of concentration that measures the number of moles of a given solute present in one liter of solution. The equation for molarity is simple and straightforward: molarity = (moles of solute) / (liters of solution). In order to calculate the molarity of the given solution, we first need to calculate the number of moles of caffeine in the solution, which is done by multiplying the mass of caffeine (25.0 grams) by the molar mass of caffeine (194.19 g/mol).

Then, we plug this number and the volume of the solution (0.450 liters) into the molarity equation to get the concentration of caffeine in the solution.

Overall, the concentration of caffeine in the solution is 55.55 mm.

To know more about caffeine refer here:

https://brainly.com/question/9255669#

#SPJ11

In air, green light has a wavelength of 530 nm and impacted on emerald with a coefficient of refraction of 1.59.

The duration of a periodic wave is the distance over which the wave's form repeats in physics.  It is the distance between two successive matching places of the same phase on the wave, such as two neighbouring crests, troughs, or zero crossings, and it is a feature of both moving and standing waves, as well as other spatial wave patterns.

The spatial frequency is the opposite of the spectrum. The Greek symbol lambda () is frequently used to represent wavelength. In the case of a sinusoidal wave travelling at a constant speed, wavelength is inversely proportionate to frequency: waves with higher frequencies have shorter wavelengths, and waves with lower frequencies have longer wavelengths.

Learn more about   wavelength

https://brainly.com/question/13533093

#SPJ1

The parents of the mystery hamster are most likely Test Two parents (Ff x Ff), as they have the possibility of producing both short fur and long fur offspring, which matches the observed phenotype of the mystery hamster.

What is Genotype?

The genotype of an organism can be represented using letters to denote the alleles inherited from each parent. For example, in humans, the gene for eye color has two alleles: brown (B) and blue (b). A person with brown eyes would have a BB or Bb genotype, while a person with blue eyes would have a bb genotype.

Test variable (independent variable): Genotype of parents

Outcome variable (dependent variable): Phenotype of offspring (fur length)

Data:

Test One

Parent 1: FF

Parent 2: Ff

Phenotype ratio:

3 : 0

short fur : long fur

Test Two

Parent 1: Ff

Parent 2: Ff

Phenotype ratio:

3 : 1

short fur : long fur

Test Three

Parent 1: ff

Parent 2: ff

Phenotype ratio:

0 : 4

short fur : long fur

From the lab results, we can conclude that the genotype for short fur length is dominant over the genotype for long fur length. The genotype for long fur length is recessive.

If you have a hamster with short fur, the possible genotypes could be FF or Ff.

If you have a hamster with long fur, the genotype could only be ff.

The data supports the hypothesis that the genotype for short fur is dominant and the genotype for long fur is recessive.

Learn more about Genotype from the given link

https://brainly.com/question/22117

#SPJ1

During glycolysis and the citric acid cycle, electrons are passed from organic molecules to a molecule of NAD⁺ and FAD⁺ that results in the formation of ATP.

ATP (Adenosine triphosphate) is an organic molecule that is considered a main source of energy for many metabolic processes and is synthesized during cellular respiration by breaking down organic molecules.ATP synthase plays a significant role in the production of ATP.

ATP synthase is an enzyme located on the inner membrane of the mitochondria that helps to make ATP. It produces ATP by using the energy stored in a proton gradient formed by the electron transport chain. The energy released by this gradient drives the conversion of ADP (adenosine diphosphate) to ATP.

In glycolysis, glucose is converted into pyruvate by a series of chemical reactions. This process involves the use of ATP, which is synthesized from ADP and inorganic phosphate. During the conversion of glucose into pyruvate, electrons are passed from organic molecules to NAD+ (nicotinamide adenine dinucleotide) to form NADH. NADH then delivers these electrons to the electron transport chain, which ultimately leads to the production of ATP.

In the citric acid cycle, pyruvate is converted into acetyl-CoA, which then enters the citric acid cycle. During this cycle, electrons are passed from organic molecules to NAD+ and FAD (flavin adenine dinucleotide) to form NADH and FADH₂. These molecules then deliver these electrons to the electron transport chain, which ultimately leads to the production of ATP.

Overall, the transfer of electrons from organic molecules to molecules such as NAD+ and FAD in glycolysis and the citric acid cycle ultimately leads to the formation of ATP.

To know more about NAD⁺, refer here:

https://brainly.com/question/4221953#

#SPJ11

A cholesterol sample is prepared using acetyl CoA molecules in which both the methyl group and the carboxyl functional group of the acetyl are radiolabeled with 14c. In the cholesterol product, the 14C label would appear in the acetate component.

Cholesterol is a waxy substance that your liver produces and is found in animal-based foods. Cholesterol is crucial for the functioning of your body. It helps your body produce hormones, vitamin D, and bile acids, which aid in the digestion of fat. However, having too much of it in your blood raises your risk of heart disease and stroke. 14C is a radiolabeled carbon isotope. Isotopes are variants of the same element that have a different number of neutrons. Carbon-14 (14C) is an isotope of carbon that has 6 protons and 8 neutrons in its nucleus. In the cholesterol product, the 14C label would appear in the acetate component.

Learn more about cholesterol  at https://brainly.com/question/841110

#SPJ11

CH4 is an example of a covalent molecule.

Covalent molecules are formed when atoms share electrons between them to form a bond. In CH4, or methane, there is a single carbon atom that shares four electrons with four hydrogen atoms, resulting in a tetrahedral shape. Covalent molecules typically have low melting and boiling points, do not conduct electricity, and tend to have lower solubility in water compared to ionic compounds.

In contrast, ionic compounds, such as NaCl, CuSO4, and LiF, are formed from the transfer of electrons from one atom to another, resulting in the formation of positively and negatively charged ions. Ionic compounds typically have high melting and boiling points, are good conductors of electricity when dissolved in water, and have higher solubility in water compared to covalent molecules.

To know more about covalent click here:

brainly.com/question/30261436

#SPJ4

The pH of the buffer prepared using 0.750 moles of HCN and 0.250 moles of NaCN dissolved into 2.00l of the solution is 9.31.

a) To determine the pH of the buffer, we need to first calculate the concentration of the acid and its conjugate base.

HCN is a weak acid and NACN is its conjugate base. The equation for the dissociation of HCN is:

HCN + H2O ⇌ H3O+ + CN-

The equilibrium constant for this reaction is Ka = [H3O+][CN-]/[HCN].

The concentration of HCN is 0.750 moles/2.00 L = 0.375 M

The concentration of CN- is 0.250 moles/2.00 L = 0.125 M

Therefore, Ka = (x)(x)/(0.375-x)

where x is the concentration of H3O+ and is assumed to be very small compared to 0.375.

Solving for x, we get x = 4.9 x 10^-10 M

Therefore, the pH of the buffer is pH = -log[H3O+]

pH = -log(4.9 x 10^-10)

pH = 9.31

b) The buffer has a higher capacity for additions of acid because it is made up of a weak acid and its conjugate base. The weak acid can neutralize added base, and the conjugate base can absorb added H3O+.

c) The pH will change by 1 pH unit when the amount of NaOH added is equal to the amount of HCN present in the buffer.

The moles of HCN in the buffer is 0.750 moles.

The reaction between NaOH and HCN is:

NaOH + HCN → NaCN + H2O

For every mole of HCN, we need one mole of NaOH to neutralize it.

Therefore, the amount of NaOH needed to change the pH by 1 unit is 0.750 moles.

Learn more about buffers at: https://brainly.com/question/13076037

#SPJ1

The pressure of the 28.2 moles of gas at a temperature of 61.8°C is 991 kPa.

Ideal gas law states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.

It is expressed as;

PV = nRT

Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )

Given that:

Number of moles n = 28.2

Temperature T = 61.8°C

Volume V = 79.2 L

Pressure P = ?

First, let's convert the temperature from Celsius to Kelvin:

T = 61.8 + 273.15

T = 334.95 K

Now we can plug in the values and solve for P:

P = nRT/V

P = ((28.2 mol) × (0.08206 Latm/molK) × (334.95 K) ) / 79.2 L

P = 9.7866atm

Convert atm to kPa ( multiply the pressure value by 101.3 )

P = 991 kPa

Therefore, the pressure of the gas is 991 kPa.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

Answer:

The pressure of the gas is 991.6 kPa (to the nearest tenth).

Explanation:

To find the total pressure of the gas in kPa, we can use the ideal gas law.

[tex]\boxed{\sf PV=nRT}[/tex]

where:

Convert the temperature from Celsius to kelvin by adding 273.15:

[tex]\implies \sf 61.8^{\circ}C=61.8+273.15=334.95\;K[/tex]

Therefore, the values are:

Substitute the values into the formula and solve for P:

[tex]\implies \sf P \cdot 79.2=28.2 \cdot 8.314472 \cdot 334.95[/tex]

[tex]\implies \sf P=\dfrac{28.2 \cdot 8.314472 \cdot 334.95}{79.2}[/tex]

[tex]\implies \sf P=991.60471...[/tex]

[tex]\implies \sf P=991.6\;kPa\;(nearest\;tenth)[/tex]

Therefore, the pressure of the gas is 991.6 kPa (to the nearest tenth).

One molecule of this substance has the molecular formula CH₂ClO, which is methoxychloro. to ascertain how many oxygen atoms there are in 2 molecules of methoxychloro.

To create dioxygen, or oxygen, two oxygen atoms must make a covalent double bond with one another. Typically, oxygen exists as a molecule. It has the name dioxygen.

With an electrical configuration of (2, 6) and an atomic number of 8, oxygen lacks two more electrons to complete an octet. By exchanging two pairs of electrons with another oxygen atom, the oxygen atom becomes stable. A diatomic oxygen molecule is one that contains two oxygen atoms.

To know more about oxygen atoms visit:-

brainly.com/question/14387251

#SPJ1

The examples of the major non-silicate minerals include the following :carbonates, halides, Oxides and sulfides.

The general characteristics of non-silicate minerals include the following:

Learn more about minerals here:

https://brainly.com/question/27737827

#SPJ1

 The combined gas law equation to get the new temperature when the gas volume decreases from 800 ml to 400 ml: P1 * V1 / T1 equals P2 * V2 / T2.

800 ml is the initial volume (V1). The original temperature is converted to Kelvin using the formula T1 (in Kelvin) = T1 (in Celsius) + 273.15 T1 = 115°C + 273.15 = 388.15 K

T2 = (V2 * T1) / V1,

T2 = (400 ml * 388.15 K) / 800 ml

T2 = 194.075 K

As a result, the new temperature is roughly 194.075 K when the gas volume is reduced to 400 ml.

Thus, The combined gas law equation to get the new temperature when the gas volume decreases from 800 ml to 400 ml: P1 * V1 / T1 equals P2 * V2 / T2.

Learn more about Gas law, refer to the link:

https://brainly.com/question/30458409

#SPJ12

The retention order for a polar stationary phase/nonpolar mobile phase is as follows: Nonpolar compounds will be eluted first, followed by polar compounds. This is due to the higher affinity of the nonpolar compounds for the stationary phase.

To predict the retention order for the given combinations of mobile and stationary phases for the polar stationary phase/nonpolar mobile phase, we need to understand what a retention factor is. In this case, the polarity of the stationary and mobile phases is the key to understanding the retention order.

Analyzing the polar stationary phase/nonpolar mobile phase, The retention factor, k, is defined as the ratio of the concentration of a compound in the stationary phase to its concentration in the mobile phase. It is the retention time of the compound divided by the elution time of the mobile phase.

A polar stationary phase interacts more strongly with polar compounds, while a nonpolar mobile phase interacts more strongly with nonpolar compounds. The retention order depends on the nature of the solutes and the nature of the mobile and stationary phases.

In general, nonpolar solutes have a greater retention factor in nonpolar mobile phases and polar solutes have a greater retention factor in polar mobile phases. So, for a polar stationary phase/nonpolar mobile phase, nonpolar compounds will elute first, followed by polar compounds.

Hence, the retention order for the given combinations of mobile and stationary phases is Nonpolar compounds > Polar compounds.

To know more about nonpolar compounds, refer here:

https://brainly.com/question/19458442

#SPJ11

The total number of chain bonds in an average molecule is 4.

To calculate the repeat unit molecular weight, you need to add the atomic weights of all the atoms in the molecule and multiply the sum by the number of repeat units in the molecule.

How to calculate the repeat unit molecular weight?

Step 1: Determine the molecular formula of the polymer unit.

Step 2: Find the atomic weights of all the atoms present in the repeat unit.

Step 3: Add up the atomic weights of all the atoms in the molecule.

Step 4: Multiply the sum by the number of repeat units in the molecule.

Here's an example:

Polymer unit: CH2CHCl

Atomic weights: C = 12.01 g/mol, H = 1.008 g/mol, Cl = 35.45 g/mol

Molecular weight = (12.01 x 2) + 1.008 + 35.45

= 60.49 g/mol

Repeat unit = (CH2CHCl)n

Repeat unit molecular weight = 60.49 x n, where n is the number of repeat units in the molecule.

Learn more about molecular weight here:

https://brainly.com/question/27988184#



#SPJ11

The mass of the resulting strontium fluoride precipitate is 42.40 grams if a 175.0 ml solution of 2.594 m strontium nitrate is mixed with 215.0 ml of a 3.162 m sodium fluoride solution.

Volume of 2.594 M strontium nitrate = 175.0 mL = 0.175 L

Volume of  3.162 M sodium fluoride = 215.0 mL = 0.215 L

The Molar mass of SrF2 is 125.62 g/mole

Step 2: The balanced equation:

Sr(NO3)2(aq.) + 2NaF(aq.) → SrF2(s) + 2NaNO3(aq.)

From the balanced equation we know that, SrF2 will precipitate, NaNO3 will dissociate in 2Na+ + 2NO3-

The moles Sr(NO3)2 = molarity * volume

Moles Sr(NO3)2 is,

                     =  3.162 M * 0.175 L

                     = 0.553 moles

We have to calculate moles Na F.

moles Na F is,

              = 3.162 M * 0.215 L

              = 0.679 moles

We get that for 1 mole of Sr(NO3)2 we need 2 moles of Na F to produce 1 mole of SrF2 and 2 moles of NaNO3. here Na F is the limiting reactant.

There will Sr(NO3)2 is in excess react 0.553/2 = 0.276 moles which will precipitate.

There will remain 0.553 - 0.276 = 0.277 moles that will not precipitate.

Now we have to calculate moles of SrF2 produced. For 1 mole of Sr(NO3)2 we need 2 moles of Na F to produce 1 mole of SrF2 and 2 moles of NaNO3.

For 0.679 moles of Na F consumed, we produced 0.679/2 = 0.3375 moles of SrF2

Now we have to calculate mass of SrF2 produced

Mass SrF2 = moles SrF2 * molar mass SrF2

Mass SrF2 = 0.3375 moles * 125.62 g/mole

Mass SrF2 = 42.40 grams

The mass of the resulting strontium fluoride precipitate is 42.40 grams.

To learn more about Mass

https://brainly.com/question/1838164

#SPJ4

The mass of Na2CrO4 required to precipitate all the silver ions from 72.3 mL of 0.134 M solution of AgNO3 is 0.786 g.

To calculate the mass of Na2CrO4 required to precipitate all the silver ions from a 72.3 mL of 0.134 M solution of AgNO3, we need to use the balanced equation for the reaction between AgNO3 and Na2CrO4:

2AgNO3 + Na2CrO4 → Ag2CrO4 + 2NaNO3

From the balanced equation, we see that 2 moles of AgNO3 reacts with 1 mole of Na2CrO4 to form 1 mole of Ag2CrO4. Therefore, the number of moles of AgNO3 in the given solution is:

0.134 M x 0.0723 L = 0.00970 moles

This means that we need half that amount of Na2CrO4 to precipitate all the silver ions, which is:

0.00485 moles

The molar mass of Na2CrO4 is 161.97 g/mol, so the mass of Na2CrO4 required is:

0.00485 moles x 161.97 g/mol = 0.786 g

Therefore, the mass of Na2CrO4 required to precipitate all the silver ions from 72.3 mL of 0.134 M solution of AgNO3 is 0.786 g.

For more questions like Silver ions click the link below:

https://brainly.com/question/30544640

#SPJ11

Universal waste is a category of hazardous waste that includes certain widely generated electronic devices, batteries, lamps, and other devices that contain hazardous materials.

The handling, storage, transportation, and disposal of universal waste is subject to regulations by the United States Environmental Protection Agency (EPA) under the Universal Waste Rule.

One of the requirements of the Universal Waste Rule is that records of universal waste shipments must be retained for a minimum of three years. This applies to any person who generates, collects, transports, or receives universal waste. The records must include the following information:

Retention of these records helps to ensure compliance with the regulations and enables tracking of the movement and disposition of universal waste. The records must be made available for inspection by authorized EPA officials upon request.

Learn more about  Universal waste

https://brainly.com/question/14441506

#SPJ4

Evaporation is a different term for it. As particles move more quickly than liquid molecules, a liquid needs energy to transform into a gas.

vaporisation is the process by which a substance is transformed from its liquid or solid state into its gaseous (vapour) state. Boiling is the term for the vaporisation process when conditions permit the creation of gas bubbles within a liquid. Sublimation is the process of directly converting a solid into a vapour.

The ratio of the time needed to evaporate a testing solvent to the time needed to evaporate a reference solvent under the same circumstances is the evaporation rate. The findings can be shown as either a percentage of the total amount evaporated within a given time frame, the amount of time needed to evaporate, or a relative rate.

To know more about energy visit:

https://brainly.com/question/8630757

#SPJ1

The statement that is correct about activation energy is that it is low for reactions that take place rapidly.

Activation energy refers to the least amount of energy needed for a reaction to take place. It is the amount of energy required to form an activated complex that breaks the bonds of reactants to form products.The significance of activation energy is that it provides information about the speed of chemical reactions. Reactions with high activation energy are slow, whereas those with low activation energy are rapid. The activation energy also determines the effectiveness of catalysts, which are substances that lower the activation energy of a reaction, allowing it to proceed more rapidly.

The Arrhenius equation is a mathematical equation that shows the dependence of reaction rate on temperature. The equation is expressed as:

[tex]k=Ae^{{\frac {-E_{a}}{RT}}}[/tex]

Where: k is the rate constant of the reaction, A is the frequency factor (a constant that depends on the reaction), Ea is the activation energy of the reaction, R is the gas constant, T is the temperature.

For more such questions on activation energy , Visit:

https://brainly.com/question/26724488

#SPJ11

1. The heat of reaction for the given chemical equation is -522.1 kJ/mole.

2. The heat of reaction for the given chemical equation is -3327.1 kJ/mole.

3. The heat of reaction for the given chemical equation is -1161.5 kJ/mole.

1. N₂H₄(1) + O₂(g) →N₂(g) + 2 H₂O(1)

The balanced chemical equation for the reaction is:

N₂H₄(1) + O₂(g) → N₂(g) + 2 H₂O(1)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [0 - 2(-285.9 kJ/mole) + 50.6 kJ/mole] - [1(0) + 1(-50.6 kJ/mole)]

ΔH°rxn = -572.7 kJ/mole + 50.6 kJ/mole

ΔH°rxn = -522.1 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -522.1 kJ/mole.

2. C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)

The balanced chemical equation for the reaction is:

C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [3(-393.5 kJ/mole) + 3(-285.9 kJ/mole)] - [1(-249.5 kJ/mole) + 4(0)]

ΔH°rxn = -3576.6 kJ/mole + 249.5 kJ/mole

ΔH°rxn = -3327.1 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -3327.1 kJ/mole.

3. CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)

The balanced chemical equation for the reaction is:

CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [1(-393.5 kJ/mole) + 2(-296.8 kJ/mole)] - [1(177.4 kJ/mole) + 1(0)]

ΔH°rxn = -984.1 kJ/mole - 177.4 kJ/mole

ΔH°rxn = -1161.5 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -1161.5 kJ/mole.

learn more about heat of reaction: https://brainly.com/question/11631046

#SPJ1

The molecular formula of the chemical substance is C4H8.

The empirical formula of a chemical substance, CH2, and its molar mass of 56.108 g/mol can be used to calculate the molecular formula of the substance.

In order to do this, we need to divide the molar mass by the empirical formula mass. The empirical formula mass for CH2 is 12.011 g/mol, so the calculation is: 56.108 g/mol / 12.011 g/mol = 4.67.

4.67, is the ratio of the molecular mass to the empirical formula mass.

This means that the molecular formula of the chemical substance is C4H8, which has a molecular mass of 4 x 12.011 g/mol = 48.044 g/mol, and is the closest molecular mass to the given molar mass of 56.108 g/mol.

Therefore, the molecular formula of the chemical substance is C4H8.

to know more about molecular formula refer here:

https://brainly.com/question/14425592#

#SPJ11