A man stands 10 m in front of a large plane mirror. How far must he walk before he is 5m away from his image? A. 10 cm B. 7.5 m C. 5 m D. 2.5 m

Answers

Answer 1

The man is 10m in front of a large plane mirror and we are to determine the distance he must walk before he is 5m away from his image.

The image formed by a plane mirror is a virtual image of the same size as the object and the distance between the object and its image is twice the distance of the object to the mirror.

The man’s distance to the mirror = 10m

Distance of man’s image to the mirror = 2 x 10 = 20m

Distance between man and his image = 20 - 10 = 10m To be 5m away from his image, he would need to walk half the distance between himself and the mirror.

Thus, he would need to walk a distance of 5m.

Option  C 5 m is correct.

#SPJ11

Learn more about the plane mirrors and  image https://brainly.com/question/1126858


Related Questions

Undisturbed, the air has a pressure of 100 kPa (kiloPascals), otherwise known as atmospheric pressure. Sound waves are pressure waves where the pressure of the medium is slightly higher or lower than usual. They travel at 330 m/s in air. For the following, be sure to label your axes and intervals. A) Make a plot of pressure vs. time at one point in space for two complete cycles of a 400 Hz harmonic sound wave that has a maximum pressure 1 kPa above atomospheric pressure. B) Make a plot of pressure vs. distance at one point in time for this same wave over two cycles. C) On each of your plots in A) & B) use a dashed line (or a different color) to draw how the plot changes if the frequency is doubled to 800 Hz. D) On each of your plots in A) & B) use a dotted line (or a different color) to draw how the plot changes if the 400 Hz sound is made underwater, where the pressure is the same, but sound travels 5 time faster than in air.

Answers

A. The intervals on the x-axis would depend on the desired duration for two complete cycles of the sound wave.

B. The intervals on the x-axis would depend on the desired range of distance for two complete cycles of the sound wave.

C. On both plots A) and B), use a dashed line (or a different color) to represent the changes if the frequency is doubled to 800 Hz.

D. This would involve stretching the waves, resulting in a lower frequency and longer wavelength

A) Plot of pressure vs. time for two complete cycles of a 400 Hz harmonic sound wave:

The x-axis represents time, and the y-axis represents pressure. The pressure values on the y-axis would range from 99 kPa to 101 kPa to account for the maximum pressure 1 kPa above atmospheric pressure.

B) Plot of pressure vs. distance for the same wave over two cycles:

The x-axis represents distance, and the y-axis represents pressure. The pressure values on the y-axis would range from 99 kPa to 101 kPa to account for the maximum pressure 1 kP above atmospheric pressure.

C) This would involve compressing the waves, resulting in a higher frequency and shorter wavelength.

D) On both plots A) and B), use a dotted line (or a different color) to represent the changes if the 400 Hz sound is made underwater, where the pressure is the same but sound travels 5 times faster than in air. This would involve stretching the waves, resulting in a lower frequency and longer wavelength, while maintaining the same pressure levels.

To know more about sound wave, here

brainly.com/question/31851162

#SPJ4

An astronaut whose mass is 105 kg has been working outside his spaceship, using a small, hand-held rocket gun to change his velocity in order to move around. After a while he finds that he has been careless: his gun is empty and he is out of reach of his
spaceship, drifting away from it at 0.7 m/s. The empty gun has a mass of 2.6 kg. How
can he get back to his ship? [A: throw it in the opposite direction with a v = 29 m/s]

Answers

To get back to his spaceship, the astronaut should throw the empty gun in the opposite direction with a velocity of 0.7 m/s.

To get back to his spaceship, the astronaut can use the principle of conservation of momentum. By throwing the empty gun in the opposite direction, he can change his momentum and create a force that propels him towards the spaceship.

Given:

Astronaut's mass (ma) = 105 kgAstronaut's velocity (va) = 0.7 m/sGun's mass (mg) = 2.6 kgGun's velocity (vg) = ?

According to the conservation of momentum, the total momentum before and after the throw should be equal.

Initial momentum = Final momentum

(ma * va) + (mg * 0) = (ma * v'a) + (mg * v'g)

Since the gun is empty and has a velocity of 0 (vg = 0), the equation simplifies to:

ma * va = ma * v'a

The astronaut's mass and velocity remain the same before and after the throw, so we can solve for v'a.

va = v'a

Therefore, the astronaut needs to throw the empty gun with a velocity equal in magnitude but opposite in direction to his current velocity. So, he should throw the gun with a velocity of 0.7 m/s in the opposite direction (v'g = -0.7 m/s).

To calculate the magnitude of the velocity, we can use the equation:

ma * va = ma * v'a

105 kg * 0.7 m/s = 105 kg * v'a

v'a = 0.7 m/s

Therefore, the astronaut should throw the empty gun with a velocity of 0.7 m/s in the opposite direction (v'g = -0.7 m/s) to get back to his spaceship.

To learn more about velocity, Visit:

https://brainly.com/question/25749514

#SPJ11

A two-stage rocket moves in space at a constant velocity of +4010 m/s. The two stages are then separated by a small explosive charge placed between them. Immediately after the explosion the velocity of the 1390 kg upper stage is +5530 m/s. What is the velocity (magnitude and direction) of the 2370-kg lower stage immediately after the explosion?

Answers

The velocity of the 2370-kg lower stage immediately after the explosion is -3190 m/s in the opposite direction.

Initially, the two-stage rocket is moving in space at a constant velocity of +4010 m/s.

When the explosive charge is detonated, the two stages separate.

The upper stage, with a mass of 1390 kg, acquires a new velocity of +5530 m/s.

To find the velocity of the lower stage, we can use the principle of conservation of momentum.

The total momentum before the explosion is equal to the total momentum after the explosion.

The momentum of the upper stage after the explosion is given by the product of its mass and velocity: (1390 kg) * (+5530 m/s) = +7,685,700 kg·m/s.

Since the explosion only affects the separation between the two stages and not their masses, the total momentum before the explosion is the same as the momentum of the entire rocket: (1390 kg + 2370 kg) * (+4010 m/s) = +15,080,600 kg·m/s.

To find the momentum of the lower stage, we subtract the momentum of the upper stage from the total momentum of the rocket after the explosion: +15,080,600 kg·m/s - +7,685,700 kg·m/s = +7,394,900 kg·m/s.

Finally, we divide the momentum of the lower stage by its mass to find its velocity: (7,394,900 kg·m/s) / (2370 kg) = -3190 m/s.

Therefore, the velocity of the 2370-kg lower stage immediately after the explosion is -3190 m/s in the opposite direction.

To learn more about velocity click here:

brainly.com/question/30559316

#SPJ11

3. In a RL circuit, a switch closes at 0.0s. It has a battery with emf E=22V. At t=1.25s, the ammeter=0.2A. If R=40ohm, what is the magnetic energy when t=3.5s. Provide a response in J in the hundredth place. show all work.

Answers

The magnetic energy in the RL circuit when t=3.5s is 2.49 J. Which  Provide a response in J in the hundredth place.

To find the magnetic energy in the RL circuit when t=3.5s, we need to calculate the current flowing through the circuit at that time and then use it to determine the energy stored in the inductor.

Given:

Emf of the battery (E) = 22V

Current at t=1.25s (I) = 0.2A

Resistance (R) = 40Ω

First, we need to find the inductance (L) of the circuit. Since the circuit contains only an inductor, the voltage across the inductor is equal to the emf of the battery. Therefore, we have:

E = L(dI/dt)

Rearranging the equation, we get:

L = E/(dI/dt)

The change in current with respect to time can be calculated as follows:

dI/dt = (I - I₀) / (t - t₀)

Where:

I₀ is the initial current at t₀ = 1.25s

Substituting the given values into the equation, we have:

dI/dt = (0.2A - I₀) / (3.5s - 1.25s)

Now, we can calculate the inductance (L):

L = 22V / [(0.2A - I₀) / (3.5s - 1.25s)]

Next, we need to calculate the energy stored in the inductor. The magnetic energy (W) is given by the equation:

W = (1/2) * L * I²

Substituting the known values, we have:

W = (1/2) * L * I²

Finally, substitute the values of L and I at t = 3.5s into the equation to find the magnetic energy at that time.

To learn more about circuit -

brainly.com/question/31329650

#SPJ11

The gravitational force changes with altitude. Find the change in gravitational force for someone who weighs 760 N at sea level as compared to the force measured when on an airplane 1600 m above sea level. You can ignore Earth's rotation for this problem. Use a negative answer to indicate a decrease in force.
For reference, Earth's mean radius (RE) is 6.37 x 106 m and Earth's mass (ME) is 5.972 x 1024 kg. [Hint: take the derivative of the expression for the force of gravity with respect to r, such that Aweight dF dr Ar. Evaluate the derivative at

Answers

Substituting the given values for Earth's mean radius (RE) and Earth's mass (ME), as well as the weight of the individual[tex](m1 = 760 N / 9.8 m/s^2 = 77.55 kg)[/tex], we can calculate the change in gravitational force.

To find the change in gravitational force experienced by an individual weighing 760 N at sea level compared to the force measured when on an airplane 1600 m above sea level, we can use the equation for gravitational force:

[tex]F = G * (m1 * m2) / r^2[/tex]

Where:

F is the gravitational force,

G is the gravitational constant,

and r is the distance between the centers of the two objects.

Let's denote the force at sea level as [tex]F_1[/tex] and the force at 1600 m above sea level as [tex]F_2[/tex]. The change in gravitational force (ΔF) can be calculated as:

ΔF =[tex]F_2 - F_1[/tex]

First, let's calculate [tex]F_1[/tex] at sea level. The distance between the individual and the center of the Earth ([tex]r_1[/tex]) is the sum of the Earth's radius (RE) and the altitude at sea level ([tex]h_1[/tex] = 0 m).

[tex]r_1 = RE + h_1 = 6.37 * 10^6 m + 0 m = 6.37 * 10^6 m[/tex]

Now we can calculate [tex]F_1[/tex] using the gravitational force equation:

[tex]F_1 = G * (m_1 * m_2) / r_1^2[/tex]

Next, let's calculate [tex]F_2[/tex] at 1600 m above sea level. The distance between the individual and the center of the Earth ([tex]r_2[/tex]) is the sum of the Earth's radius (RE) and the altitude at 1600 m ([tex]h_2[/tex] = 1600 m).

[tex]r_2[/tex] = [tex]RE + h_2 = 6.37 * 10^6 m + 1600 m = 6.37 * 10^6 m + 1.6 * 10^3 m = 6.3716 * 10^6 m[/tex]

Now we can calculate [tex]F_2[/tex] using the gravitational force equation:

[tex]F_2[/tex] = G * ([tex]m_1 * m_2[/tex]) /[tex]r_2^2[/tex]

Finally, we can find the change in gravitational force by subtracting [tex]F_1[/tex] from [tex]F_2[/tex]:

ΔF = [tex]F_2 - F_1[/tex]

To know more about Earth's mean radius, here

brainly.com/question/31408822

#SPJ4

The gravitational force acting on the person has decreased by 0.104 N when they are on an airplane 1600 m above sea level as compared to the force measured at sea level.

Gravitational force is given by F = G (Mm / r²), where G is the universal gravitational constant, M is the mass of the planet, m is the mass of the object, and r is the distance between the center of mass of the planet and the center of mass of the object.Given,At sea level, a person weighs 760N.

On an airplane 1600 m above sea level, the weight of the person is different. We need to calculate this difference and find the change in gravitational force.As we know, the gravitational force changes with altitude. The gravitational force acting on an object decreases as it moves farther away from the earth's center.To find the change in gravitational force, we need to first calculate the gravitational force acting on the person at sea level.

Gravitational force at sea level:F₁ = G × (Mm / R)²...[Equation 1]

Here, M is the mass of the earth, m is the mass of the person, R is the radius of the earth, and G is the gravitational constant. Putting the given values in Equation 1:F₁ = 6.674 × 10⁻¹¹ × (5.972 × 10²⁴ × 760) / (6.371 × 10⁶)²F₁ = 7.437 NNow, let's find the gravitational force acting on the person at 1600m above sea level.

Gravitational force at 1600m above sea level:F₂ = G × (Mm / (R+h))²...[Equation 2]Here, M is the mass of the earth, m is the mass of the person, R is the radius of the earth, h is the height of the airplane, and G is the gravitational constant. Putting the given values in Equation 2:F₂ = 6.674 × 10⁻¹¹ × (5.972 × 10²⁴ × 760) / (6.371 × 10⁶ + 1600)²F₂ = 7.333 NNow, we can find the change in gravitational force.ΔF = F₂ - F₁ΔF = 7.333 - 7.437ΔF = -0.104 NThe change in gravitational force is -0.104 N. A negative answer indicates a decrease in force.

Therefore, the gravitational force acting on the person has decreased by 0.104 N when they are on an airplane 1600 m above sea level as compared to the force measured at sea level.

Know more Gravitational Force

https://brainly.com/question/16613634

#SPJ11

You have 1.60 kg of water at 28.0°C in an insulated container of negligible mass. You add 0.710 kg of ice that is initially at -24.0°C. Assume no heat is lost to the surroundings and the mixture eventually reaches thermal equilibrium. If all of the ice has melted, what is the final temperature (in °C, rounded to 2 decimal places) of the water in the container? Otherwise if some ice remains, what is the mass of ice (in kg,
rounded to 3 decimal places) that remains?

Answers

The final temperature of the water in the container, after all the ice has melted, is approximately 33.39°C.

To find the final temperature or the mass of ice remaining, we need to calculate the heat gained and lost by both the water and the ice.

First, let's calculate the heat gained by the ice to reach its melting point at 0°C:

Q_ice = mass_ice * specific_heat_ice * (0°C - (-24.0°C))

where:

mass_ice = 0.710 kg (mass of ice)

specific_heat_ice = 2.09 kJ/kg°C (specific heat capacity of ice)

Q_ice = 0.710 kg * 2.09 kJ/kg°C * (24.0°C)

Q_ice = 35.1112 kJ

The heat gained by the ice will be equal to the heat lost by the water. Let's calculate the heat lost by the water to reach its final temperature (T_f):

Q_water = mass_water * specific_heat_water * (T_f - 28.0°C)

where:

mass_water = 1.60 kg (mass of water)

specific_heat_water = 4.18 kJ/kg°C (specific heat capacity of water)

Q_water = 1.60 kg * 4.18 kJ/kg°C * (T_f - 28.0°C)

Q_water = 6.688 kJ * (T_f - 28.0°C)

Since the total heat gained by the ice is equal to the total heat lost by the water, we can set up the equation:

35.1112 kJ = 6.688 kJ * (T_f - 28.0°C)

Now we can solve for the final temperature (T_f):

35.1112 kJ = 6.688 kJ * T_f - 6.688 kJ * 28.0°C

35.1112 kJ + 6.688 kJ * 28.0°C = 6.688 kJ * T_f

35.1112 kJ + 187.744 kJ°C = 6.688 kJ * T_f

222.8552 kJ = 6.688 kJ * T_f

T_f = 222.8552 kJ / 6.688 kJ

T_f ≈ 33.39°C

Therefore, the final temperature of the water in the container, when all the ice has melted, is approximately 33.39°C (rounded to 2 decimal places).

To learn more about temperature visit : https://brainly.com/question/27944554

#SPJ11

What is the time difference between an 30 year old on Earth and an 30 year old born and living her entire life in a spaceship and travelling at 0.89c ? Answer from each person's perspective.

Answers

The time difference From Person A's perspective on Earth, both individuals age 30 years. From Person B's perspective on the spaceship, only about 15 years pass.

According to special relativity, time dilation occurs when an object is moving at a significant fraction of the speed of light relative to another object. In this scenario, we have two individuals: a 30-year-old on Earth (let's call them Person A) and a 30-year-old who has spent their entire life on a spaceship traveling at 0.89 times the speed of light (let's call them Person B).

From Person A's perspective on Earth, time would pass normally for them. They would experience time in the same way as it occurs on Earth. So, if Person A remains on Earth, they would age 30 years.

From Person B's perspective on the spaceship, however, things would be different due to time dilation. When an object approaches the speed of light, time appears to slow down for that object relative to a stationary observer. In this case, Person B is traveling at 0.89 times the speed of light.

The time dilation factor, γ (gamma), can be calculated using the formula:

γ = 1 / √(1 - v^2/c^2)

where v is the velocity of the spaceship and c is the speed of light.

In this case, v = 0.89c. Plugging in the values, we get:

γ = 1 / √(1 - (0.89c)^2/c^2)

  ≈ 1.986

This means that, from Person B's perspective, time would appear to pass at approximately half the rate compared to Person A on Earth. So, if Person B spends 30 years on the spaceship, they would perceive only about 15 years passing.

It's important to note that this calculation assumes constant velocity and does not account for other factors like acceleration or deceleration. Additionally, the effects of time dilation become more significant as an object's velocity approaches the speed of light.

To know more about time,

https://brainly.com/question/32664450#

#SPJ11

A parallel-plate capacitor has a charge Q and plates of area A . What force acts on one plate to attract it toward the other plate? Because the electric field between the plates is E=Q / A €₀, you might think the force is F=Q E=Q²/ A €₀ This conclusion is wrong because the field E includes contributions from both plates, and the field created by the positive plate cannot exert any force on the positive plate. Show that the force exerted on each plate is actually F= Q² / 2 A€₀ . Suggestion: Let C = €₀A / x for an arbitrary plate separation x and note that the work done in separating the two charged plates is W = in F d x .

Answers

To show that the force exerted on each plate of a parallel-plate capacitor is F=Q²/2A€₀, we can follow the suggested approach.

Let's start with the equation W = F * dx, where W is the work done, F is the force, and dx is the separation between the plates. The work done in separating the two charged plates can be expressed as W = (1/2)C(V^2), where C is the capacitance and V is the potential difference between the plates. Since C = €₀A / x, we can substitute it into the equation to get W = (1/2)(€₀A / x)(V^2).

The potential difference V can be written as V = Q / (€₀A), where Q is the charge on one of the plates.
Substituting V into the equation, we have W = (1/2)(€₀A / x)((Q / (€₀A))^2).
Simplifying the equation further, W = (1/2)(Q^2 / (€₀A)(x)).
Since W = F * dx, we can equate the two equations to get (1/2)(Q^2 / (€₀A)(x)) = F * dx.
Dividing both sides by dx and rearranging, we obtain F = (1/2)(Q^2 / (€₀A)(x)).
Now, since A and €₀ are constant for a given capacitor, we can simplify the equation to F = Q^2 / (2A€₀x).
Therefore, the force exerted on each plate of a parallel-plate capacitor is F = Q^2 / (2A€₀), as required.

To know more about force visit :

https://brainly.com/question/30507236

#SPJ11

A circular wire of radius 25 cm is oriented such that its plane is parallel to a 0.05 T magnetic field. The wire is rotated in 0.5 s such that its plane is perpendicular to the magnetic field. Determine the voltage generated in the wire.

Answers

The number of turns (N) in the wire loop is needed to calculate the voltage generated in the wire.

To determine the voltage generated in the wire, we can use Faraday's law of electromagnetic induction. According to the law, the induced voltage (emf) in a wire loop is given by the equation:

emf = -N * ΔΦ/Δt

Where:

- emf is the induced voltage (in volts, V).

- N is the number of turns in the wire loop.

- ΔΦ is the change in magnetic flux through the loop (in Weber, Wb).

- Δt is the time interval over which the change occurs (in seconds, s).

In this case, we are given:

- Radius of the circular wire = 25 cm = 0.25 m

- Magnetic field strength = 0.05 T

- Time interval = 0.5 s

- The wire is rotated from a position parallel to the magnetic field to a position perpendicular to it.

To find the change in magnetic flux (ΔΦ), we need to calculate the initial and final flux values and then find the difference between them.

Initial magnetic flux (Φi):

Φi = B * A_initial

Where B is the magnetic field strength and A_initial is the initial area of the wire loop.Since the wire loop is initially parallel to the magnetic field, the initial area (A_initial) is given by the formula for the area of a circle:

A_initial = π * (radius^2)

Final magnetic flux (Φf):

Φf = B * A_final

Where A_final is the final area of the wire loop when it is perpendicular to the magnetic field.The change in magnetic flux (ΔΦ) is then given by: ΔΦ = Φf - Φi

Finally, we can substitute the values into the formula for emf to find the voltage generated.

Let's calculate step by step:

1. Calculate the initial area (A_initial):

A_initial = π * (0.25 m)^2

2. Calculate the initial magnetic flux (Φi):

Φi = 0.05 T * A_initial

3. Calculate the final area (A_final):

A_final = π * (0.25 m)^2

4. Calculate the final magnetic flux (Φf):

Φf = 0.05 T * A_final

5. Calculate the change in magnetic flux (ΔΦ):

ΔΦ = Φf - Φi

6. Calculate the voltage (emf):

emf = -N * ΔΦ/Δt

To know more about voltage, click here:

brainly.com/question/32002804

#SPJ11

A parallel-plate capacitor has plates with area 2.30x10-² m² separated by 2.00 mm of Teflon. ▾ Part A Calculate the charge on the plates when they are charged to a potential difference of 13.0 V. Express your answer in coulombs. LIVE ΑΣΦ ▼ Submit Request Answer Part B E= Use Gauss's law to calculate the electric field inside the Teflon. Express your answer in newtons per coulomb. 195| ΑΣΦ Submit Request Answer Part C BIL B ? ? C N/C Use Gauss's law to calculate the electric field if the voltage source is disconnected and the Teflon is removed. Express your answer in newtons per coulomb.

Answers

A. The charge on the plates of the parallel-plate capacitor, when charged to a potential difference of 13.0 V, is 5.95 x 10⁻⁷ C (coulombs).

B. The electric field inside the Teflon, calculated using Gauss's law, is 6.50 x 10⁶ N/C (newtons per coulomb).

C. When the voltage source is disconnected and the Teflon is removed, the electric field becomes zero since there are no charges or electric field present.

A. To calculate the charge on the plates, we use the formula Q = C · V, where Q is the charge, C is the capacitance, and V is the potential difference. The capacitance of a parallel-plate capacitor is given by C = ε₀ · (A/d), where ε₀ is the permittivity of free space, A is the area of the plates, and d is the distance between the plates. Substituting the given values, we find the charge on the plates to be 5.95 x 10⁻⁷ C.

B. To calculate the electric field inside the Teflon using Gauss's law, we consider a Gaussian surface between the plates. Since Teflon is a dielectric material, it has a relative permittivity εᵣ. Gauss's law states that the electric flux through a closed surface is equal to the charge enclosed divided by the permittivity of the material.

Since the electric field is uniform between the plates, the flux is simply E · A, where E is the electric field and A is the area of the plates. Setting the electric flux equal to Q/ε₀, where Q is the charge on the plates, we can solve for the electric field E. Substituting the given values, we find the electric field inside the Teflon to be 6.50 x 10⁶ N/C.

C. When the voltage source is disconnected and the Teflon is removed, the capacitor is no longer connected to a potential difference, and therefore, no charges are present on the plates. According to Gauss's law, in the absence of any charges, the electric field is zero. Thus, when the Teflon is removed, the electric field becomes zero between the plates.

To know more about parallel-plate capacitor refer here:

https://brainly.com/question/30906246#

#SPJ11

An object is 2m away from a convex mirror in a store, its image is 1 m behind the mirror. What is the focal length of the mirror? O 0.5 O -0.5 2 O-2

Answers

The focal length of the convex mirror in the store can be determined by using the mirror equation. The focal length of the mirror is -0.5m.

In the given scenario, the object is placed 2m away from a convex mirror, and the image is formed 1m behind the mirror. To find the focal length of the mirror, we can use the mirror equation:

1/f = 1/v - 1/u

where f is the focal length, v is the image distance, and u is the object distance.

Given that the image distance (v) is -1m (negative because it is formed behind the mirror) and the object distance (u) is -2m (negative because it is in front of the mirror), we can substitute these values into the mirror equation:

1/f = 1/-1 - 1/-2

Simplifying the equation gives:

1/f = -2/2 - 1/2

1/f = -3/2

f = -2/3

Therefore, the focal length of the convex mirror is approximately -0.5m.

To learn more about convex mirrors click here: brainly.com/question/33230797

#SPJ11

Calculate the energy stored in a 750 F capacitor that has been charged to 12.0V.

Answers

The energy stored in the 750 F capacitor that has been charged to 12.0 V is 54,000 joules.

The energy stored in a capacitor can be calculated using the formula:

E = (1/2) * C * V^2

Where:

E is the energy stored in the capacitor

C is the capacitance of the capacitor

V is the voltage across the capacitor

Capacitance (C) = 750 F

Voltage (V) = 12.0 V

Substituting the values into the formula:

E = (1/2) * 750 F * (12.0 V)^2

Calculating the energy:

E = 0.5 * 750 F * 144 V^2

E = 54,000 J

Learn more about the energy stored in a capacitor at https://brainly.com/question/26258102

#SPJ11

A free electron has a kinetic energy 19.4eV and is incident on a potential energy barrier of U = 34.5eV and width w=0.068mm. What is the probability for the electron to penetrate this barrier (in %)?

Answers

Tunneling of electrons, also known as quantum tunneling, is a phenomenon in quantum mechanics where particles, such as electrons, can penetrate through potential energy barriers that are classically forbidden.

The probability of penetration of an electron through a potential energy barrier can be determined using the expression: T= 16(E/U)(1 - E/U)exp (-2aw) where, a = sqrt (2m (U - E)) / h where T is the probability of penetration, E is the kinetic energy of the electron, U is the height of the potential energy barrier, w is the width of the barrier, m is the mass of the electron, and h is the Planck's constant.

The given values are, E = 19.4 eV, U = 34.5 eV, w = 0.068 mm = 6.8 × 10⁻⁵ cm, mass of the electron, m = 9.11 × 10⁻³¹ kg, and Planck's constant, h = 6.626 × 10⁻³⁴ J s. Substituting the given values, we get: a = sqrt (2 × 9.11 × 10⁻³¹ × (34.5 - 19.4) × 1.602 × 10⁻¹⁹) / 6.626 × 10⁻³⁴a = 8.26 × 10¹⁰ m⁻¹The probability of penetration: T= 16(19.4 / 34.5)(1 - 19.4 / 34.5)exp (-2 × 8.26 × 10¹⁰ × 6.8 × 10⁻⁵)T= 0.0255 or 2.55 %Therefore, the probability for the electron to penetrate this barrier is 2.55 %.

For more problems on tunneling visit:

https://brainly.com/question/32094866

#SPJ11

A 37 kg box sits (is stationary) on an inclined plane that makes
an angle of 14° with the
horizontal. What is the minimum value of the coefficient of static
friction between the box
and the ramp?

Answers

The force of static friction must be equal to or greater than the component of weight along the incline. Therefore, Fs(max) >= mg * sin(θ)..

The weight of the box can be decomposed into two components: the force acting perpendicular to the plane (normal force) and the force acting parallel to the plane (component of weight along the incline). The normal force can be calculated as N = mg * cos(θ), where m is the mass of the box, g is the acceleration due to gravity, and θ is the angle of the inclined plane.

The force of static friction (Fs) acts parallel to the incline in the opposite direction to prevent the box from sliding. The maximum value of static friction can be given by Fs(max) = μs * N, where μs is the coefficient of static friction.

In order for the box to remain stationary, the force of static friction must be equal to or greater than the component of weight along the incline. Therefore, Fs(max) >= mg * sin(θ).

Substituting the values, we have μs * N >= mg * sin(θ).

By substituting N = mg * cos(θ), we have μs * mg * cos(θ) >= mg * sin(θ).

The mass (m) cancels out, resulting in μs * cos(θ) >= sin(θ).

Finally, we can solve for the minimum value of the coefficient of static friction by rearranging the inequality: μs >= tan(θ).

By substituting the given angle of 14°, the minimum value of the coefficient of static friction is μs >= tan(14°).

To learn more about friction , click here: https://brainly.com/question/13000653

#SPJ11

Caesar the Ape is in a tree, some height H above the ground. He sees his friend Will Rodman being chased by another angry Ape. Caesar grabs hold of a vine to swing down, grabs hold of Will Rodman, and swings up into another tree. Will the height Caesar swings up to with Rodman be higher than, the same as, or lower than the height Caesar starts from? Explain your reasoning using conservation laws of energy and/or momentum.

Answers

The height Caesar swings up to with Rodman will be lower than the height Caesar starts from.Conservation of energy and momentum play a significant role in determining the height to which Caesar swings up with Rodman. Energy and momentum are conserved when there is no external force acting on a system.

The law of conservation of energy states that the total energy in a closed system is constant, while the law of conservation of momentum states that the total momentum in a closed system is constant When he grabs hold of Will Rodman, he transfers some of his kinetic energy to him, causing the total kinetic energy of the system to remain constant.

The conservation of momentum states that the total momentum of the system is constant, which means that the combined momentum of Caesar and Will Rodman is the same before and after they swing.The total energy of the system is equal to the sum of the kinetic and potential energy. When Caesar and Will Rodman swing up into the second tree, some of their kinetic energy is converted back into potential energy, and their total energy is constant. As a result, the sum of their potential energy and kinetic energy at any point in the swing is the same as the sum of their potential energy and kinetic energy at any other point in the swing.

To know more about kinetic visit:

https://brainly.com/question/999862

#SPJ11

In the following circuit calculate the total resistance, the total current, current, and voltage of each resistor if the voltage from the power supply is 10 V and R1=100Ω,R2=150Ω,R3=100Ω,R4=50Ω,R5=150Ω,R6=100Ω, R7=100Ω,R8=150Ω,R9=100Ω, and R10=50Ω​

Answers

The total resistance in the given circuit is 100 Ω. The total current flowing through the circuit is 0.1 A. The current and voltage across each resistor can be calculated based on Ohm's law and the principles of series.

To calculate the total resistance, we need to determine the equivalent resistance of the circuit. In this case, we have a combination of series and parallel resistors.

Calculate the equivalent resistance of R1, R2, and R3 in parallel.

1/Rp = 1/R1 + 1/R2 + 1/R3

1/Rp = 1/100 + 1/150 + 1/100

1/Rp = 15/300 + 10/300 + 15/300

1/Rp = 40/300

Rp = 300/40

Rp = 7.5 Ω

Calculate the equivalent resistance of R4, R5, and R6 in parallel.

1/Rp = 1/R4 + 1/R5 + 1/R6

1/Rp = 1/50 + 1/150 + 1/100

1/Rp = 6/300 + 2/300 + 3/300

1/Rp = 11/300

Rp = 300/11

Rp = 27.27 Ω (rounded to two decimal places)

Calculate the equivalent resistance of R7, R8, and R9 in parallel.

1/Rp = 1/R7 + 1/R8 + 1/R9

1/Rp = 1/100 + 1/150 + 1/100

1/Rp = 15/300 + 10/300 + 15/300

1/Rp = 40/300

Rp = 300/40

Rp = 7.5 Ω

Calculate the total resistance (Rt) of the circuit by adding the resistances in series (R10 and the parallel combinations of R1, R2, R3, R4, R5, R6, R7, R8, and R9).

Rt = R10 + (Rp + Rp + Rp)

Rt = 50 + (7.5 + 27.27 + 7.5)

Rt = 100 Ω

The total resistance of the circuit is 100 Ω.

Calculate the total current (It) flowing through the circuit using Ohm's law.

It = V/Rt

It = 10/100

It = 0.1 A

The total current flowing through the circuit is 0.1 A.

Calculate the current flowing through each resistor using the principles of series and parallel resistors.

The current flowing through R1, R2, and R3 (in parallel) is the same as the total current (0.1 A).

The current flowing through R4, R5, and R6 (in parallel) can be calculated using Ohm's law:

V = I * R

V = 0.1 * 27.27

V ≈ 2.73 V

The current flowing through R7, R8, and R9 (in parallel) is the same as the total current (0.1 A).

The current flowing through R10 is the same as the total current (0.1 A).

To learn more about voltage -

brainly.com/question/17441042

#SPJ11

Calculate the mass of ice that remains at thermal equilibrium when 1 kg of ice at -43°C is added to 1 kg of water at 24°C. Please report the mass of ice in kg to 3 decimal places. Hint: the latent h

Answers

The mass of ice remaining at thermal equilibrium is approximately 0.125 kg, assuming no heat loss or gain from the environment.

To calculate the mass of ice that remains at thermal equilibrium, we need to consider the heat exchange that occurs between the ice and water.

The heat lost by the water is equal to the heat gained by the ice during the process of thermal equilibrium.

The heat lost by the water is given by the formula:

Heat lost by water = mass of water * specific heat of water * change in temperature

The specific heat of water is approximately 4.186 kJ/(kg·°C).

The heat gained by the ice is given by the formula:

Heat gained by ice = mass of ice * latent heat of fusion

The latent heat of fusion for ice is 334 kJ/kg.

Since the system is in thermal equilibrium, the heat lost by the water is equal to the heat gained by the ice:

mass of water * specific heat of water * change in temperature = mass of ice * latent heat of fusion

Rearranging the equation, we can solve for the mass of ice:

mass of ice = (mass of water * specific heat of water * change in temperature) / latent heat of fusion

Given:

mass of water = 1 kgchange in temperature = (24°C - 0°C) = 24°C

Plugging in the values:

mass of ice = (1 kg * 4.186 kJ/(kg·°C) * 24°C) / 334 kJ/kg

mass of ice ≈ 0.125 kg (to 3 decimal places)

Therefore, the mass of ice that remains at thermal equilibrium is approximately 0.125 kg.

The complete question should be:

Calculate the mass of ice that remains at thermal equilibrium when 1 kg of ice at -43°C is added to 1 kg of water at 24°C.

Please report the mass of ice in kg to 3 decimal places.

Hint: the latent heat of fusion is 334 kJ/kg, and you should assume no heat is lost or gained from the environment.

To learn more about thermal equilibrium, Visit:

https://brainly.com/question/14556352

#SPJ11

Polonium has more isotopes than any other element, and they are all radioactive. One polonium-206 nucleus contains neutrons (Record your answer in the numerical-response section below.) Your answer:

Answers

The number of protons that can be found in polonium 206 is 122.

Why is polonium radioactive?

You deduct the atomic number from the mass number to get the number of neutrons in an atom. The mass number is a measure of how many protons and neutrons are present in an atom's nucleus.

We the have that;

Mass number = Atomic number + Number of neutrons

Number of neutrons = Mass number - Atomic number

= 206 - 84

= 122

Generally, you provide the mass number for Polonium-206,we can calculate the number of neutrons .

Learn more about polonium:https://brainly.com/question/15100857

#SPJ4

TT 47. A transverse wave on a string is modeled with the wave function y(x, t) = (0.20 cm)sin (2.00 m-1x – 3.00 s-14+ 16). What is the height of the string with respect to the equilibrium position at a position x = 4.00 m and a time t = 10.00 s? =

Answers

The negative sign indicates that the height of the string at the given position and time is below the equilibrium position. Hence, the height is approximately -0.056 cm.

The height of the string with respect to the equilibrium position can be determined using the given wave function. At a position x = 4.00 m and a time t = 10.00 s, the wave function is y(x, t) = (0.20 cm)sin(2.00 m^(-1)x – 3.00 s^(-1)t + 16). By substituting the values of x and t into the wave function and evaluating the sine function, we can find the height of the string at that specific location and time.

The given wave function is y(x, t) = (0.20 cm)sin(2.00 m^(-1)x – 3.00 s^(-1)t + 16), where x represents the position along the string and t represents time. To find the height of the string at a specific position x = 4.00 m and time t = 10.00 s, we substitute these values into the wave function.

y(4.00 m, 10.00 s) = (0.20 cm)sin[2.00 m^(-1)(4.00 m) – 3.00 s^(-1)(10.00 s) + 16]

Simplifying the expression inside the sine function:

= (0.20 cm)sin[8.00 – 30.00 + 16]

= (0.20 cm)sin[-6.00]

Using the sine function, sin(-6.00) ≈ -0.279.

Therefore, y(4.00 m, 10.00 s) = (0.20 cm)(-0.279) ≈ -0.056 cm.

Learn more about equilibrium here:

brainly.com/question/30694482

#SPJ11

A mass is placed on a frictionless, horizontal table. A spring (k=110 N/m), which can be stretched or compressed, is placed on the table. A 3-kg mass is anchored to the wall. The equilibrium position is marked at zero. A student moves the mass out to x=7.0 cm and releases it from rest. The mass oscillates in simple harmonic motion. Find the position, velocity, and acceleration of the mass at time t=3.00 s.

Answers

Position of the mass after t=3.00 s = 0.0638 m ; Velocity of the mass after t=3.00 s= -0.436 m/s ; Acceleration of the mass after t=3.00 s = -2.98 m/s².

Step 1: Calculate the angular frequencyω = √(k/m), where k is the spring constant and m is the mass.ω = √(110/3)

= 6.83 rad/s

Step 2: Determine the amplitude of oscillation

the displacement equation x(t) = A cos(ωt + φ), where A is the amplitude of oscillation, and φ is the phase constant. x(0) = A cos(φ)

At equilibrium position, x(0) = 0, so A cos(φ) = 0, implying that A = 0 as cos(φ) cannot be zero.

Therefore, the mass does not oscillate at the equilibrium position.

Step 3: Calculate the phase constant φ = cos⁻¹(x(0) / A)

At time t = 0, the mass is at x = 7.0 cm,

sox(0) = 7.0 cm

= 0.07 m

Using x(t) = A cos(ωt + φ),0.07 m

= A cos(φ)cos(φ)

= 0.07/Aφ

= cos⁻¹(0.07/A)

For simplicity, assume that the mass is released from x = 7.0 cm at t = 0 and moves towards the equilibrium position x = 0. Since the phase constant is zero at the equilibrium position, the value of the phase constant is 0 for all subsequent instants.

Step 4: Calculate the position of the mass x(t) = A cos(ωt)

The position of the mass at t = 3.00 s is,

x(3.00 s) = A cos(ωt)

= 0.0638 m.

Step 5: Calculate the velocity of the mass v(t) = -Aω sin(ωt)

The velocity of the mass at t = 3.00 s is,

v(3.00 s) = -0.436 m/s.

Step 6: Calculate the acceleration of the mass

a(t) = -Aω2 cos(ωt)

The acceleration of the mass at t = 3.00 s is,

a(3.00 s) = -2.98 m/s²

Position of the mass after t=3.00 s: x(3.00 s)

= 0.0638 m

Velocity of the mass after t=3.00 s: v(3.00 s)

= -0.436 m/s

Acceleration of the mass after t=3.00 s: a(3.00 s)

= -2.98 m/s².

To know more about acceleration, refer

https://brainly.com/question/460763

#SPJ11

What is the magnitude and direction of a magnetic field at
point P 5.0 cm from a long straight wire carrying 4.0 A of
current?

Answers

The magnitude and direction of the magnetic field at point P, which is 5.0 cm away from a long straight wire carrying 4.0 A of current, can be determined using the formula for the magnetic field produced by a current-carrying wire.

The magnitude of the magnetic field can be calculated using the right-hand rule, while the direction can be determined based on the direction of the current and the position of point P.

The magnetic field produced by a long straight wire is given by the formula B = (μ₀ * I) / (2π * r), where B is the magnetic field, μ₀ is the permeability of free space (approximately 4π × 10^(-7) T·m/A), I is the current in the wire, and r is the distance from the wire.

Substituting the given values, we have B = (4π × 10^(-7) T·m/A * 4.0 A) / (2π * 0.05 m). Simplifying the equation, we find B = 4.0 × 10^(-6) T.

To determine the direction of the magnetic field at point P, we can use the right-hand rule. If we point the thumb of our right hand in the direction of the current (from the wire toward the direction of flow), the curled fingers indicate the direction of the magnetic field lines. In this case, if we imagine grasping the wire with our right hand such that our fingers wrap around the wire, the magnetic field lines would be in a counterclockwise direction around the wire when viewed from the point P.

Therefore, the magnitude of the magnetic field at point P is 4.0 × 10^(-6) T, and the direction of the magnetic field is counterclockwise around the wire when viewed from point P.

Learn more about magnetic field here:

brainly.com/question/14848188

#SPJ11

You would like to use Ampere's law to find the Magnetic field a distance
r from a long straight wire. In order to take advantage of the symmetry
of the situation, the integration should be performed over:

Answers

In order to take advantage of the symmetry of the situation, the integration should be performed over a circular loop of radius r centered on the wire. The magnetic field will be tangential to the loop, and its magnitude will be proportional to the current in the wire and inversely proportional to the radius of the loop.

To take advantage of the symmetry of the situation and apply Ampere's law to find the magnetic field at a distance "r" from a long straight wire, you need to choose a closed path for integration that exhibits symmetry. In this case, the most suitable closed path is a circle centered on the wire and with a radius "r".

By choosing a circular path, the magnetic field will have a constant magnitude at every point on the path due to the symmetry of the wire. This allows us to simplify the integration and determine the magnetic field using Ampere's law.

The integration should be performed over the circular path with a radius "r" and centered on the wire.

To learn more about Ampere's law visit: https://brainly.com/question/17070619

#SPJ11

17. A 1.5 kg object moves as a function of time as X(t) = 5 cos [3t+2.5), where x is in meter and t in second. What is the kinetic energy of the object at t=4s? (5) (a) 174 ) (b) 147) (c) 417) (d) 741 18. An aluminum rod is heated from 20°C to 100°C. The final length of the rod is 50 cm. what is the change in length of the rod? [The coefficient of linear expansion of the rod is 24 x 10^/C] (5) (a) 0.01 cm (b) 0.1 cm (c) 0.1 mm (d) 0.02 cm 19. What is the amount of heat required to change 50 g of ice at -20°C to water at 50°C? [Specific heat capacity of ice =0.5 calg, Specfic heat capacity of water = 1 cal/gºC. Latent heat of fusion of ice = 79.6 cal/g] (5) (a) 6089 cal (b) 6980 cal (c) 6890 cal (d) 6098 cal 20. What is the r.m.s. speed of the Nitrogen molecule at 50C? [M = 28 g/mol; NA=6.023 x 10 molecules/mol] (5) (a) 534.6 m/s (b) 536.4 m's (c) 364.5 m/s (d) 465.3 m/s

Answers

The kinetic energy of the object at t = 4s is approximately 133.87 J. The change in length of the rod is 0.096 cm. The amount of heat required to change 50 g of ice at -20°C to water at 50°C is 7480 cal. The rms speed of the Nitrogen molecule at 50°C is approximately 465.3 m/s.

17. To find the kinetic energy of the object at t = 4s, we can differentiate the given position function with respect to time to obtain the velocity function and then calculate the kinetic energy using the formula KE = (1/2)mv^2.

Given: X(t) = 5cos(3t + 2.5), where x is in meters and t is in seconds.

Differentiating X(t) with respect to t:

V(t) = -15sin(3t + 2.5)

At t = 4s:

V(4) = -15sin(3(4) + 2.5)

V(4) ≈ -13.73 m/s (rounded to two decimal places)

Now, we can calculate the kinetic energy:

KE = (1/2)(1.5 kg)(-13.73 m/s)^2

KE ≈ 133.87 J (rounded to two decimal places)

Therefore, the kinetic energy of the object at t = 4s is approximately 133.87 J.

18. The change in length (ΔL) of the rod can be calculated using the formula ΔL = αLΔT, where α is the coefficient of linear expansion, L is the initial length of the rod, and ΔT is the change in temperature.

Given: Coefficient of linear expansion (α) = 24 x 10^-6 /°C, Initial length (L) = 50 cm, Change in temperature (ΔT) = (100°C - 20°C) = 80°C.

ΔL = (24 x 10^-6 /°C)(50 cm)(80°C)

ΔL = 0.096 cm

Therefore, the change in length of the rod is 0.096 cm.

19. To calculate the amount of heat required, we need to consider the phase changes and temperature changes separately.

First, we need to heat the ice from -20°C to its melting point:

Heat = mass × specific heat capacity × temperature change

Heat = 50 g × 0.5 cal/g°C × (0°C - (-20°C))

Heat = 1000 cal

Next, we need to melt the ice at 0°C:

Heat = mass × latent heat of fusion

Heat = 50 g × 79.6 cal/g

Heat = 3980 cal

Finally, we need to heat the water from 0°C to 50°C:

Heat = mass × specific heat capacity × temperature change

Heat = 50 g × 1 cal/g°C × (50°C - 0°C)

Heat = 2500 cal

Total heat required = 1000 cal + 3980 cal + 2500 cal = 7480 cal

Therefore, the amount of heat required to change 50 g of ice at -20°C to water at 50°C is 7480 cal.

20. The root mean square (rms) speed of a molecule can be calculated using the formula vrms = √(3kT/m), where k is the Boltzmann constant, T is the temperature in Kelvin, and m is the molar mass of the gas.

Given: Temperature (T) = 50°C = 323 K, Molar mass (M) = 28 g/mol.

First, convert the molar mass from grams to kilograms:

M = 28 g/mol = 0.028 kg/mol

Now, we can calculate the rms speed:

vrms = √(3kT/m)

vrms = √[(3 × 1.38 × 10^-23 J/K) × 323 K / (0.028 kg/mol)]

vrms ≈ 465.3 m/s (rounded to one decimal place)

Therefore, the rms speed of the Nitrogen molecule at 50°C is approximately 465.3 m/s.

Learn more about kinetic energy: https://brainly.com/question/30337295

#SPJ11

Calculate the force of attraction between an electron and a proton located 2.0 mm apart.

Answers

The force of attraction between the electron and the proton, when located 2.0 mm apart, is approximately -2.304 x 10⁻⁸ N.

According to Coulomb's law, the force of attraction (F) between two charged particles is given by the equation

F = k * (q1 * q2) / r², where

k is the electrostatic constant,

q1 and q2 are the charges of the particles, and

r is the distance between them.

In this case, we have an electron with charge q1 = -1.6 x 10⁻¹⁹ C and a proton with charge q2 = +1.6 x 10⁻¹⁹ C. The distance between them is given as r = 2.0 mm, which is equivalent to 2.0 x 10⁻³ m.

The electrostatic constant, k, has a value of approximately 9.0 x 10⁹ Nm²/C².

Substituting the given values into the equation, we can calculate the force of attraction:

F = (9.0 x 10⁹ Nm²/C²) * ((-1.6 x 10⁻¹⁹ C) * (1.6 x 10⁻¹⁹ C)) / (2.0 x 10⁻³ m)²

Performing the calculations:

F ≈ -2.304 x 10⁻⁸ N

Therefore, the force of attraction between the electron and the proton, when located 2.0 mm apart, is approximately -2.304 x 10⁻⁸ N. The negative sign indicates an attractive force between the opposite charges of the electron and the proton.

To know more about proton , click here-

brainly.com/question/12535409

#SPJ11

A material has an index of refraction n = 1.47, the speed of the light in vacuum is c = 3 X 10^8. Which formula can be used to calculate the speed of the light in this material?

Answers

The speed of light in this material is approximately 2.04 x 10^8 meters per second. The formula that can be used to calculate the speed of light in a material is v = c/n.

The speed of light in vacuum is denoted by c, which has a constant value of approximately 3 x 10^8 meters per second. The index of refraction of a material is represented by n. To calculate the speed of light in the material, we divide the speed of light in vacuum (c) by the index of refraction (n).

Using the given values, we can substitute them into the formula:

v = c/n

= (3 x 10^8) / 1.47

≈ 2.04 x 10^8 meters per second

Therefore, the speed of light in this material is approximately 2.04 x 10^8 meters per second.

To learn more about refraction , click here :  https://brainly.com/question/14760207

#SPJ11

A strong magnet is dropped through a copper tube. Which of the following is most likely to occur? Since the magnet is attracted to the copper, it will be attracted to the copper tube and stick to it. Since the magnet is not attracted to the copper, it will fall through the tube as if it were just dropped outside the copper tube (that is, with an acceleration equal to that of freefall). O As the magnet falls, current are generated within the copper tube that will cause the magnet to fall faster than it would have if it were just dropped without a copper tube. As the magnet falls, current are generated within the copper tube that will cause the magnet to fall slower than it would have if it were just dropped without a copper tube.

Answers

When a strong magnet is dropped through a copper tube, the most likely scenario is that currents are generated within the copper tube, which will cause the magnet to fall slower than it would have if it were just dropped without a copper tube.

This phenomenon is known as electromagnetic induction.

As the magnet falls through the copper tube, the changing magnetic field induces a current in the copper tube according to Faraday's law of electromagnetic induction.

This induced current creates a magnetic field that opposes the motion of the magnet. The interaction between the induced magnetic field and the magnet's magnetic field results in a drag force, known as the Lenz's law, which opposes the motion of the magnet.

Therefore, the magnet experiences a resistive force from the induced currents, causing it to fall slower than it would under freefall conditions. The stronger the magnet and the thicker the copper tube, the more pronounced this effect will be.

Learn more about electromagnetic induction here : brainly.com/question/32444953
#SPJ11

Two convex thin lenses with focal lengths 12 cm and 18.0 cm aro aligned on a common avis, running left to right, the 12-сm lens being on the left. A distance of 360 сm separates the lenses. An object is located at a distance of 15.0 cm to the left of the 12-сm lens. A Make a sketch of the system of lenses as described above B. Where will the final image appear as measured from the 18-cm bens? Give answer in cm, and use appropriate sign conventions Is the final image real or virtual? D. is the famae upright or inverted? E What is the magnification of the final image?

Answers

The magnification is given by: M = v2/v1 = (54 cm)/(60 cm) = 0.9

This means that the image is smaller than the object, by a factor of 0.9.

A. Diagram B. Using the lens formula:

1/f = 1/v - 1/u

For the first lens, with u = -15 cm, f = +12 cm, and v1 is unknown.

Thus,1/12 = 1/v1 + 1/15v1 = 60 cm

For the second lens, with u = 360 cm - 60 cm = +300 cm, f = +18 cm, and v2 is unknown.

Thus,1/18 = 1/v2 - 1/300v2 = 54 cm

Thus, the image is formed at a distance of 54 cm to the right of the second lens, measured from its center, which makes it 54 - 18 = 36 cm to the right of the second lens measured from its right-hand side.

The image is real, as it appears on the opposite side of the lens from the object. It is inverted, since the object is located between the two lenses.

To know more about magnification  visit:-

https://brainly.com/question/2648016

#SPJ11

A 100km long high voltage transmission line that uses an unknown material has a diameter of 3 cm and a potential difference of 220V is maintained across the ends. The average time between collision is 2.7 x 10-14 s and the free-electron density is 8.5 x 1026 /m3. Determine the drift velocity in m/s.

Answers

The drift velocity of electrons in the high voltage transmission line is approximately 4.18 x 10-5 m/s.

1. We can start by calculating the cross-sectional area of the transmission line. The formula for the area of a circle is A = [tex]\pi r^2[/tex], where r is the radius of the line. In this case, the diameter is given as 3 cm, so the radius (r) is 1.5 cm or 0.015 m.

  A = π(0.01[tex]5)^2[/tex]

    = 0.0007065 [tex]m^2[/tex]

2. Next, we need to calculate the current density (J) using the formula J = nev, where n is the free-electron density and e is the charge of an electron.

  Given: n = 8.5 x [tex]10^2^6[/tex] /[tex]m^3[/tex]

          e = 1.6 x [tex]10^{-19[/tex] C (charge of an electron)

  J = (8.5 x [tex]10^2^6[/tex] /[tex]m^3)(1.6 x 10^-19[/tex] C)v

    = 1.36 x [tex]10^7[/tex] v /[tex]m^2[/tex]

3. The current density (J) is also equal to the product of the drift velocity (v) and the charge carrier concentration (nq), where q is the charge of an electron.

  J = nqv

  1.36 x 1[tex]0^7[/tex] v /m^2 = (8.5 x [tex]10^2^6[/tex] /[tex]m^3[/tex])(1.6 x [tex]10^{-19[/tex] C)v

4. We can solve for the drift velocity (v) by rearranging the equation:

  v = (1.36 x [tex]10^7[/tex] v /[tex]m^2[/tex]) / (8.5 x [tex]10^2^6[/tex] /[tex]m^3[/tex])(1.6 x [tex]10^{-19[/tex] C)

    = (1.36 x [tex]10^7[/tex]) / (8.5 x 1.6) m/s

    ≈ 4.18 x [tex]10^{-5[/tex] m/s

Therefore, the drift velocity in the high voltage transmission line is approximately 4.18 x[tex]10^{-5 m/s.[/tex]

For more such questions on velocity, click on:

https://brainly.com/question/29396365

#SPJ8

An entity is in a 2-D infinite well of dimension 0≤x≤a 0 ≤ y ≤ b The wave function of this entity is given by y(x, y) = C sin(kxx) sin(k¸y) (a) Determine the values of kx, ky, and C.

Answers

For an entity in a 2D infinite well, the values of kx and ky are determined by the boundary conditions kx * 0 = 0 and ky = mπ / b, where m is a positive integer and the value of C is determined by normalizing the wave function through the integral ∫∫ |C sin(kx x) sin(ky y)|² dxdy = 1.

In a 2-D infinite well of dimensions 0 ≤ x ≤ a and 0 ≤ y ≤ b, the wave function for the entity is given by:

y(x, y) = C sin(kx x) sin(ky y)

To determine the values of kx, ky, and C, we need to apply the boundary conditions for the wave function.

Boundary condition along the x-direction:

Since the well extends from 0 to a in the x-direction, the wave function should be zero at both x = 0 and x = a. Therefore, we have:

y(0, y) = 0

y(a, y) = 0

Using the given wave function, we can substitute these values and solve for kx.

0 = C sin(kx * 0) sin(ky y)

0 = C sin(kx a) sin(ky y)

Since sin(0) = 0, we get:

kx * 0 = nπ

kx a = mπ

Here, n and m are positive integers representing the number of nodes along the x-direction and y-direction, respectively.

Since kx * 0 = 0, we have n = 0 (the ground state) for the x-direction.

For the y-direction, we have ky = mπ / b.

Normalization condition:

The wave function should also be normalized, which means the integral of the absolute square of the wave function over the entire 2-D well should be equal to 1.

∫∫ |y(x, y)|² dxdy = 1

∫∫ |C sin(kx x) sin(ky y)|² dxdy = 1

Using the properties of sine squared, the integral simplifies to:

C² ∫∫ sin²(kx x) sin²(ky y) dxdy = 1

Integrating over the ranges 0 to a for x and 0 to b for y, we can evaluate the integral.

Once we have the integral, we can set it equal to 1 and solve for C to determine its value.

Thus, the boundary conditions kx * 0 = 0 and ky = mπ / b are used to determine the values of kx and ky and the value of C is determined by normalizing the wave function.

To learn more about wave function :

https://brainly.com/question/30591309

#SPJ11

Rope A has 2 times the length, 3 times the mass, and is under 5 times the tension that rope B is under. If transverse waves travel on both ropes, what is the ratio of the speed of the Wave on rope A to the speed of the wave on rope B ?

Answers

The ratio of the speed of the wave on rope A to the speed of the wave on rope B is 1.29.

According to the given statement, rope A is longer, heavier and under higher tension than rope B. As a result, the speed of waves in rope A will be greater than the speed of waves in rope B.

And the ratio of the speed of the wave on rope A to the speed of the wave on rope B can be determined by using the following formula's ∝ √(Tension/ mass) When everything else is held constant, the speed of a wave on a string is directly proportional to the square root of the tension on the string and inversely proportional to the square root of the linear density of the string.

So, the speed of the waves in rope A, VA can be written as

:vA = k√(TA/MA) ------ equation 1And the speed of waves in rope B, VB can be written as:

vB = k√(TB/MB) ------ equation 2Where k is a constant of proportionality that is constant for both equations.

Dividing equation 1 by equation 2 we get, VA/vB = √(TA/MA) / √(TB/MB)Taking the given information, we have:

Rope A has twice the length of Rope B, i.e., L_A=2L_BRope A has three times the mass of Rope B, i.e., M_A=3M_BRope A is under 5 times the tension of Rope B, i.e., T_A=5T_B

Replacing the values in equation we get, vA/vB = √(TA/MA) / √(TB/MB)= √ (5T_B / 3M_B) / √(T_B / M_B)= √(5/3)= 1.29

Therefore, the ratio of the speed of the wave on rope A to the speed of the wave on rope B is 1.29.

Learn more about mass Here.

https://brainly.com/question/11954533

#SPJ11

Other Questions
Consider two equal point charges separated by a distance d. At what point (other than infinity) would a third test charge experience no net force? Class Example { public static void main(String[] args) { // This is the code editor System. Out. Println(". And this is the terminal"); } } When we need to analyze trends in GDP and the consumer price index, which segment of the general/macro environment are we referring to? O Technological O Sociocultural O Political-Legal O Economic a The provider orders ondansetron 0.15 mg/kg IV stat. The patient weighs 140 pounds. The medication is available in a vial marked 2 mg/mL. Identify how many milliliters the nurse will administer f What cultural artifacts led to archaeologists changing the time frame of the development of agriculture? O cave art O pottery shards O Evidence of campfires O The Hohlenstein-Stadel figurine Exercise 1 Draw one line under the indefinite pronoun subject. Draw two lines under the correct form of the verb.Many of the old pirate ships (has been, have been) lost in that area. Why does the Catholic Church as an institution appear to be a "monolithic" or strictly structured organization? Why is this appearance not always the case? How does that effect Catholic practice in the US? Why are/were Catholics considered a religious minority in America if they are also Christians who believe in the three basic tenets of Christianity? 2). Calculate the time that it will take to reach a conversion = 0.8 in a batch reactor for a A = Product, elementary reaction.Use: specific reaction rate (k) equal to 0.25 min, Ca = 1 M. Use: fx dx 1-X = (In-_x]. Following WWII, the United States entered a more _____ foreign policy by participating in NATO and the United Nations. a. Multilateral b. Quadrilateral c. Isolationist d. Unilateral ---- is the practice of conducting foreign policy primarily on a bilateral basis, without forming entangling alliances with other nationsa.Multilateralism b. Realism c. Unilateralismd. Internationalism Question 8 of 10How can the setting help reveal information about a character?OA. By showing how a character reacts to or interacts with his or hersurroundingsOB. By presenting a more complete picture of the story's locationOC. By encouraging the reader to connect with a characterOD. By introducing a character and setting up the main conflict In a certain season, a baseball player had a total of 234 hits. He hit three fewer triples than home runs, and he also hit two times as many doubles as home runs. Additionally, he hit 41 times as many singles as triples. Find the numbe of singles, doubles, triples, and home runs hit by the player during the season. The playerhit singles. doubles, triples, and home runs. Type the word that best matches the statement below. A) Anorexia B) Bingeing C) Bulimia D) Civil CommitmentE) Competency F) Confidentiality G) Due Process H) latrogenic I) Insanity Defense J) Malingering K) Purging L) Restricting Type M) Secondary Gain N) Splinter Skills O) Theory of Mind Task that autistic savants excel in ____. A steel walkway spans the New York Thruway near Angola NY. The walkway spans a 190 foot 5.06 inch gap. If the walkway was designed for a temperature range of -34.7 C to 36.2 C how much space needs to be allowed for expansion? Report your answer in inches with two decimal places including units. 7. Two forces, F and G, act on a particle. The force F has magnitude 4N and acts in a direction with a bearing of 120 and the force G has magnitude 6N and acts due north. Given that P= 2F + G, find (i) the magnitude of P (ii) the direction of P, giving your answer as a bearing to the nearest degree. (7) Discuss how to determine the right location for a smallbusiness. What factors do you consider most important and why? You are given the following information: Stockholders' equity as reported on the firms balance sheet = $4.5 billion, price/earnings ratio = 19.5, common shares outstanding = 230 million, and market/book ratio = 2.4. The firm's market value of total debt is $8 billion, the firm has cash and equivalents totaling $290 million, and the firm's EBITDA equals $1 billion. What is the price of a share of the company's common stock? Do not round intermediate calculations. Round your answer to the nearest cent.$ ---------What is the firm's EV/EBITDA? Do not round intermediate calculations. Round your answer to two decimal places.--------PLEASE ANSWER ASAP If an auto license plate has four digits followed by four letters. How many differentlicense plates are possible ifa. Digits and letters are not repeated on a plate?b. Repetition of digits and letters are permitted? identify and list twelve industry terminology related to your roleas a pathology collector ParamedicList and briefly describe the five (5) components of an initialresponse where a person is displaying behaviours of concern. A nurse is caring for a client with Grave's disease. The serum thyroid stimulating hormones are very low and thyroxine hormones are elevated, which of the following clinical presentations should the nurse expect to find? a) Palpitation b) Bronze skin c) Periorbital edema d) Hypothermia