A mass is tied to a string and swung in a horizontal circle w a constant angular speed. Speed is doubled. What happens to the tension in the string?

The magnetic flux through the loop is 0.125 Wb when oriented perpendicular to the magnetic field, 0.0625 Wb when oriented 60.0° from the magnetic field, and 0 Wb when oriented parallel to the magnetic field.

To calculate the magnetic flux through the loop, we can use the formula:
Magnetic flux (Φ) = B × A × cosθ
where B is the magnetic field magnitude, A is the area of the square loop, and θ is the angle between the magnetic field and the loop's normal vector.
a. Perpendicular to the magnetic field (θ = 0°)
In this case, cosθ = cos(0°) = 1.
Area (A) = (side length)² = (0.250 m)² = 0.0625 m²
Φ = B × A × cosθ = 2.00 T × 0.0625 m² × 1 = 0.125 Wb
b. 60.0° from the magnetic field (θ = 60°)
In this case, cosθ = cos(60°) = 0.5.
Φ = B × A × cosθ = 2.00 T × 0.0625 m² × 0.5 = 0.0625 Wb
c. Parallel to the magnetic field (θ = 90°)
In this case, cosθ = cos(90°) = 0.
Φ = B × A × cosθ = 2.00 T × 0.0625 m² × 0 = 0 Wb

For more such questions on magnetic field

brainly.com/question/26257705

#SPJ11

The transit technique used to identify planets involves looking for small dips in a star's brightness as a planet crosses in front of it. This causes a slight decrease in the amount of light received by the Earth from that star, which is then detected by astronomers.

Transit method is a technique that uses the detection of planetary transits to identify exoplanets. By detecting dips in the brightness of a star, caused by a planet crossing in front of it, this method allows for the detection of planets orbiting other stars beyond our own solar system.

To find exoplanets, astronomers look for periodic dips in the brightness of stars that are caused by a planet passing in front of them. The amount of light that a planet blocks depends on its size, so larger planets create deeper dips in the star's brightness.

The timing and duration of the dips also provide information about the planet's orbit, size, and composition.

Transiting planets are therefore more likely to be detected if they have a large radius compared to their host stars, or if their orbital periods are short.

The transit method is also more effective when the host star is relatively small and bright, as this makes the planet's transit easier to detect.

To know more about transit technique, refer here:

https://brainly.com/question/12484173#

#SPJ11

At the point when an atom gains/loses an electron, the atom becomes charged and is called an ion.

Acquiring an electron brings about a negative charge, so the atom is an anion.

Losing an electron brings about a positive charge, so an atom particle is a cation.

An atom is a nonpartisan molecule that contains an equivalent number of protons and electrons. A particle is an atom that has lost or acquired at least one electron and has a positive or negative charge subsequently. In this way, the principal contrast between an atom and a particle is that an atom has an impartial charge while a particle has a positive or negative charge.

A few instances of ions include:

Chloride anions (Cl - )

Sulfate anions (SO 42-)

Nitrate anions (NO 3-)

Calcium cation (Ca 2+)

Manganese (II) cation (Mn 2+)

Hypochlorite anion (ClO - )

Ammonium cation (NH 4+)

Ferric cation (Fe 3+)

to know more about the electron click here:

https://brainly.com/question/28337734

#SPJ4

The force between the asteroid and the spacecraft will be 40 N when the spacecraft moves to a position three times as far from the center of the asteroid.

The gravitational force between two objects of masses m1 and m2 separated by a distance r is given by the formula:

F = G(m₁m₂) / r²

where G is the gravitational constant.

In this problem, the asteroid exerts a gravitational force of 360 N on the spacecraft when they are at a certain distance r from each other. When the spacecraft moves to a position three times as far from the center of the asteroid, its distance from the asteroid will be 3r. To calculate the new force between them, we can use the same formula and plug in the new distance:

F' = G(m1m2) / (3r)^2

F' = G(m1m2) / 9r^2

Since the masses of the asteroid and spacecraft are constant, we can divide the second equation by the first to find the ratio of the new force to the original force:

F' / F = (G(m₁m₂) / r²) / 9r²) / (G(m₁m₂) / r²)

F' / F = (1 / 9)

F' = (1 / 9) * F

F' = (1 / 9) * 360 N

F' = 40 N

Therefore, the force will be 40 N.

Learn more about The Force: https://brainly.com/question/30526425

#SPJ11

A diffraction grating that has 130 lines per centimeter for 580 nm light, if the screens are 1.50 m apart, then the distance between the edges is 30.6 mm

The formula for the distance between fringes for a diffraction grating is given:

d sinθ = mλ,

where d is the spacing between the grating lines, θ is the angle between the incident beam and the diffracted beam, m is the order of the diffraction maximum, and λ is the wavelength of light.

It can also be expressed as

Δy = mλD/d,

where Δy is the distance between adjacent fringes on the screen, D is the distance from the grating to the screen, and d is the spacing between the grating lines.

Given data:

Spacing between grating lines, d = 1/130 cm = 0.00769 cm

The wavelength of light, λ = 580 nm = 580 × 10⁻⁹ m

Distance from grating to the screen, D = 1.50 m

The formula to calculate the distance between fringes produced by a diffraction grating is given:

Δy = mλD/d

Now, substituting the given values in the above formula we get,

Δy = (1)(580 × 10⁻⁹ m)(1.50 m)/(0.00769 × 10⁻⁴ m)

Δy = 0.0306 m = 30.6 mm

Therefore, the distance between fringes produced by a diffraction grating having 130 lines per centimeter for 580 nm light, if the screen is 1.50 m away is 30.6 mm.

Learn more about diffraction grating at https://brainly.com/question/13104464

#SPJ11

Nuclear reactor incidents have been studied in hundreds to determine the stochastic effects on the workers and exposed population.

The stochastic effect refers to radiation-induced effects that may occur in tissues or cells and that are subject to probabilistic relationships between exposure and reaction. The probability of developing cancer increases as a result of exposure to radiation. The greater the exposure dose, the greater the likelihood of developing cancer.The stochastic effect can occur even at low radiation doses.

This is opposed to deterministic effects, which only occur when a particular radiation dose threshold is surpassed. Stochastic effects are also referred to as random or probabilistic effects. They can happen in any tissue or organ in the body, including reproductive cells, which can lead to heritable genetic mutations. The probability of developing cancer increases as the radiation dose rises.

Know more about Nuclear reactor    here:

https://brainly.com/question/14400638

#SPJ11

Answer:

The answer to your problem is, the spring constant K should be 6 N/m.

Explanation:

When the force F should be applied at the spring so it generated the stretching distance

i.e.

F = k.x

F means the force

K means the constant

x means the stretching distance

Here the weight should be 96 N, the stretching distance is 16 km

Now the spring constant should be:

K = f/x

= 96/16

= 6 N/m

Thus the answer to your problem is, the spring constant K should be 6 N/m.

The resistance of a wire is quantified by r. The wire is stretched to double its length, but the material maintains the same density.

When a wire's length is doubled, its resistance is doubled as well. When a wire's thickness is doubled, its resistance is decreased to one-half of its previous value. The formula for wire resistance is given by the following equation:

R = ρL / A

Since the wire's density is constant, the resistance is proportional to the wire's length and inverse to the cross-sectional area. As a result, doubling the wire's length would double its resistance.

So the new resistance in r would be twice the previous resistance, which is R.

Mathematically,

[tex]R_2[/tex] = 2R where R is the previous resistance of the wire.

Learn more about resistance at:

brainly.com/question/29038879

#SPJ11

The force exerted by the boy on the man is also 100 N, according to Newton's Third Law of Motion.

Newton's Third Law of Motion is a fundamental principle in physics that describes the relationship between forces acting on objects. It states that for every action, there is an equal and opposite reaction.

This means that when an object exerts a force on another object, the second object exerts an equal and opposite force back on the first object.

In this scenario, the man exerts a force of 100 N on the boy in the forward direction. As a result, the boy exerts an equal and opposite force of 100 N on the man in the backward direction.

This principle applies to all objects in motion and is essential for understanding the dynamics of physical systems.

Therefore, the force exerted by the boy on the man is also 100 N.

To know more about Newton's Third Law of Motion click here:

https://brainly.com/question/974124

#SPJ11

The balloon is being pushed backward by air pressure. When a car begins to move, air pressure builds up in front of the car, pushing air backwards and creating a wind that affects the balloon inside. As the car accelerates, the wind increases, and the balloon is pushed backwards relative to the car. This phenomenon is known as the 'Venturi Effect'.

When a car moves, it creates a pressure difference in front of and behind the car. This difference in pressure creates a force that moves air around the car. In the case of the balloon, the force of the wind created by the car is pushing the balloon backwards. This is the same effect you feel when a fan is turned on, but in reverse.

The Venturi Effect is a phenomenon in fluid dynamics which explains the decrease in pressure when the velocity of the fluid increases. In the case of the balloon, this decrease in pressure created by the wind of the car causes it to move backwards. This is because air is being pushed away from the balloon and the surrounding area, creating a low-pressure environment.

In summary, the balloon is being pushed backwards by air pressure as the car moves forward. This is known as the Venturi Effect, and it is caused by the decrease in pressure caused by the wind of the car.

For more similar questions on" balloon"

brainly.com/question/30457768

#SPJ11

The probability that the passenger will get on the first train that arrives is the same as the probability that they will arrive at the station between 7 and 8 a.m., which is 1/2.

The uniform distribution is a type of probability distribution where all outcomes are equally likely. In this case, the passenger arrives at the station at a time that is uniformly distributed between 7 and 8 a.m. Therefore, the probability that the passenger will get on the first train that arrives is the same as the probability that they will arrive at the station between 7 and 8 a.m., which is 1/2.
In other words, the probability that the passenger will go to destination A is 1/2. This is because the probability that they will arrive between 7 and 8 a.m. and get on the first train that arrives is the same as the probability that they will arrive between 7 and 8 a.m., which is 1/2.

Therefore, the proportion of time the passenger goes to destination A is 1/2. This is because the probability of them getting on the first train that arrives is the same as the probability of them arriving between 7 and 8 a.m., which is 1/2.

For more such questions on Probability distribution.

https://brainly.com/question/14210034#

#SPJ11

The amount of charge flowing through the third light bulb over the course of 9.80 minutes is 6.069C.

Since we know the relation between current and charge and also current is same in case of series connection and here three bulb connected in series.

I = q / t

given:

I = ?
q = 2.06 C

t = 2.59 minutes = 155.4 sec

I = 2.06 / 155.4 A

We have to find charge flow in 7.63 minutes

q = I x t

q = 2.06 / 155.4 x 7.63 x 60

q = 6.069C

In the field of physics, charge refers to a fundamental property of matter that describes the amount of electrical force that an object possesses. Charge is quantized, meaning that it comes in discrete units, and it can be either positive or negative. Objects that have the same type of charge (either positive or negative) repel each other, while objects with opposite charges attract each other. This is the basis for the behavior of electrical circuits, as well as the functioning of electronic devices.

Charge is also conserved, meaning that it cannot be created or destroyed, only transferred from one object to another. This is why electrical devices are designed to use energy efficiently, as any charge lost due to resistance in the circuit will be converted into heat and cannot be recovered.

To learn more about Charge visit here:

brainly.com/question/3412043

#SPJ4

Answer:

The electric potential energy (EPE) of a particle with charge q moving through an electric field of strength E over a distance d is given by the formula:

EPE = qEd

In this problem, we are given:

EPE = 5.2 x 10^-18 J

E = 80 N/C

d = 12 m

Substituting these values into the formula, we get:

5.2 x 10^-18 J = q(80 N/C)(12 m)

q = 5.2 x 10^-18 J / (80 N/C)(12 m)

q = 6.875 x 10^-21 C

Therefore, the particle charge is 6.875 x 10^-21 Coulombs.

Explanation:

BRAINLIEST PLEASE!

The words on the pages of a textbook and the wave of a hand your friend makes when she sees you on the street are both examples of physical phenomena.

The words on the pages of a textbook and the wave of a hand your friend makes when she sees you on the street are both examples of physical phenomena. Physical phenomena are observable events or occurrences that can be described using the scientific method. These phenomena can be observed using our senses, such as sight, touch, sound, taste, and smell, or measured using instruments, such as thermometers, scales, or cameras. For example, the wave of a hand is a physical phenomenon because it is an observable event that can be seen and measured. Similarly, the words on the pages of a textbook are physical phenomena because they are observable and can be seen and read.

For more questions related to physical phenomena.

https://brainly.com/question/30827263

#SPJ11

The height of the image is approximately 1.066 cm, and since it is negative, it means that the image is inverted and smaller than the object.

Using the thin lens equation:

1/f = 1/d_o + 1/d_i

where f is the focal length of the lens, d_o is the object distance, and d_i is the image distance.

Plugging in the given values, we get:

1/4 = 1/16 + 1/d_i

Solving for d_i, we get:

d_i = 3.2 cm

Using the magnification equation:

m = -d_i/d_o

where m is the magnification of the image.

Plugging in the given values, we get:

m = -3.2/16 = -0.2

Since the magnification is negative, the image is inverted.

Finally, using the equation:

m = h_i/h_o

where h_i is the height of the image, and h_o is the height of the object.

Plugging in the given values and solving for h_i, we get:

h_i = m * h_o = (-0.2) * 5.33 cm = -1.066 cm

Therefore, the height of the image is approximately 1.066 cm, and since it is negative, it means that the image is inverted and smaller than the object.

What is magnification of lens?

The magnification of a lens is a measure of how much larger or smaller an image appears relative to the object that is being viewed through the lens. It is the ratio of the height of the image formed by the lens to the height of the object.

To know more about lens, visit:

https://brainly.com/question/29834071

#SPJ1

If the balls have a head-on, inelastic collision and the 2.0-kg ball recoils with a speed of 3.2 m/s, the kinetic energy lost in the collision is 364.6 J.

Using conservation of momentum, we can find the final velocity:

m1 * v1 + m2 * v2 = (m1 + m2) * vf

Solving for vf, we get:

vf = (m1 * v1 + m2 * v2) / (m1 + m2)

= (2.0 kg * 14 m/s + 6.3 kg * 4.0 m/s) / (2.0 kg + 6.3 kg)

= 6.0 m/s

The final total kinetic energy of the system is:

KEf = (1/2) * (m1 + m2) * vf^2

= (1/2) * 8.3 kg * (6.0 m/s)^2

= 112.2 J

The kinetic energy lost in the collision is the difference between the initial and final kinetic energies:

KE lost = KEi - KEf

= 476.8 J - 112.2 J

= 364.6 J

An inelastic collision is a type of collision between two or more objects in which the total kinetic energy of the system is not conserved. In an inelastic collision, some or all of the kinetic energy of the colliding objects is converted into other forms of energy such as heat, sound, or deformation of the objects.

In an inelastic collision, the colliding objects stick together after the collision and move with a common velocity. This is in contrast to an elastic collision, in which the colliding objects bounce off each other and the total kinetic energy of the system is conserved. Inelastic collisions can occur in many different situations, such as in car crashes, when two objects collide and stick together, or when a ball hits a wall and loses some of its kinetic energy due to deformation.

To learn more about Inelastic collision visit here:

brainly.com/question/15742157

#SPJ4

Complete Question: -

Two balls with masses of 2.0 kg and 6.3 kg travel toward each other at speeds of 14 m/s and 4.0 m/s, respectively. If the balls have a head-on, inelastic collision and the 2.0-kg ball recoils with a speed of 3.2 m/s, how much kinetic energy is lost in the collision?

When a ball is thrown at an upward angle, the vertical and horizontal components of velocity change in different ways. The vertical component of velocity decreases to a certain point before increasing again due to gravity. However, the horizontal component of velocity remains constant throughout the motion of the ball.

When a ball is tossed at an upward angle, the velocity has two components; vertical and horizontal components. The horizontal component is unaffected since there is no force acting on it.

The vertical component is influenced by the gravitational force acting on the ball. As the ball goes up, the vertical component of velocity decreases to zero. The maximum point is reached when the ball's velocity is zero. At this point, the ball stops going up and starts going down. As the ball falls, the vertical component of velocity increases in the opposite direction to the gravitational force acting on it.

Therefore, the vertical component of velocity changes as the ball is tossed at an upward angle. It increases, then decreases to zero at the top of its trajectory, and then increases again as the ball falls back to the ground. The horizontal component of velocity is constant throughout the motion of the ball because there is no force acting on it.

Hence, when a ball is tossed at an upward angle, the vertical and horizontal components of velocity change in different ways.

To know more about the components of velocity, refer here:

https://brainly.com/question/14431896#

#SPJ11

When a parcel of air rises without any external forces ,the temperature decreases so it expands because there's less pressure higher up in the atmosphere.

The temperature decreases because

To learn more about the parcel of air:

https://brainly.com/question/30580488.

#SPJ11

Unusual circumstances caused Kepler to become a lawyer in his 40s'. Johannes Kepler was forced to switch professions due to a lack of funds. Johannes Kepler was unable to pay his bills by working as a mathematician and scientist alone.

As a result, in his forties, Kepler began studying law to make ends meet. Kepler was assigned to be an adviser to the Emperor Ferdinand's chancellor due to his success in the scientific field, and it was there that he learned the importance of the law.

Kepler became a professor of mathematics at the University of Graz in Austria in 1594, and he held this position for eleven years before being expelled for theological reasons.

He later moved to Prague, where he was appointed the mathematician to Rudolf II, the Holy Roman Emperor, and remained in that position until Rudolf's death in 1612.2.

Meaning of expand:

Expand means to make or become larger or more extensive. It also means to write out or present in more detail. It also means to spread out, stretch out, or unfold.

To learn more about Kepler:

https://brainly.com/question/1608361#
#SPJ11

Option C, It would take 50 m³ of Mars' atmosphere to collect the same mass of air as one m³ on Earth. To calculate the volume of Mars' atmosphere required to collect a mass of 1kg, we need to use the density of the Martian atmosphere and the mass of the air on Earth.

The density of air at moderate altitude on Earth is given as 1 kg/m3. This means that 1 cubic meter of air on Earth has a mass of 1 kg. To convert this to grams per cubic centimeter, we can divide by 1000, which gives 0.001 g/cm3.

The mass of air in one m³ on Earth is 1 kg, while the density of the atmosphere near Mars' surface is 0.02 kg/m³. Therefore, to collect 1 kg of Mars' atmosphere, we need:

1 kg / 0.02 kg/m³ = 50 m³

So, it would take 50 m³ of Mars' atmosphere to collect the same mass of air as one m³ on Earth.

Complete question -

The density of air at moderate altitude on earth is 1 kg/m3 (this can be converted to 0.001 g/cm3). the density of the atmosphere near mars' surface is 0.02 kg/m3. how many m3 of mars atmosphere would it take to collect a mass of 1kg, the same mass as in one m3 on earth?

A. 1

B. 10

C. 50

D. 100

To know more about the density of air

brainly.com/question/30075980

#SPJ4

The relative permittivity of a dielectric medium is a measure of the electric field created within it when exposed to an electromagnetic wave. The relative permittivity is calculated by comparing the electric field in the dielectric medium to the electric field in a vacuum.

In a dielectric medium, the electric field is weakened due to the presence of molecules that absorb some of the energy from the electromagnetic wave. The greater the number of molecules, the higher the relative permittivity of the dielectric medium. The lower the relative permittivity of a dielectric medium, the faster the speed of the electromagnetic wave traveling through it.

In conclusion, the relative permittivity of the dielectric medium in which the electromagnetic wave is traveling can be used to measure the electric field within it. The greater the number of molecules present in the dielectric medium, the higher the relative permittivity and the slower the speed of the electromagnetic wave.

To know more about relative permittivity refer here:

https://brainly.com/question/29288724#

#SPJ11

The two charges would be 219.1 meters apart.

The force between two charges is given by Coulomb's Law:

F = k * (q1 * q2) / r^2

where F is the force, k is the Coulomb constant (9.0 x 10^9 N*m^2/C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between the charges.

In this case, we have two charges with a magnitude of +2.0 C each and a force of 8.5 x 10^8 N between them. Substituting these values into Coulomb's Law, we get:

8.5 x 10^8 N = (9.0 x 10^9 N*m^2/C^2) * [(2.0 C)^2 / r^2]

Simplifying this expression, we get:

r^2 = [(2.0 C)^2 * (9.0 x 10^9 N*m^2/C^2)] / (8.5 x 10^8 N)

r^2 = 4.8 x 10^4 m^2

Taking the square root of both sides, we get:

r = 219.1 meters

Therefore, the two charges are 219.1 meters apart.

More on the distance between two charges can be found here: https://brainly.com/question/30654342

#SPJ1

The laws of physics that can be used to explain the behaviors of the carts in this interactive, whether or not the collision was elastic or inelastic, are the laws of conservation of momentum and conservation of energy.

The law of conservation of momentum states that the total momentum of the objects before the collision is equal to the total momentum of the objects after the collision.

The law of conservation of energy states that the total energy of the system remains constant, regardless of the type of collision that takes place.

If the collision is elastic, then the total kinetic energy of the objects before and after the collision is equal. If the collision is inelastic, then the total kinetic energy of the objects after the collision is less than before the collision.

This law applies to both elastic and inelastic collisions. Conservation of energy also applies to both elastic and inelastic collisions. In elastic collisions, the kinetic energy is conserved.

Learn more about the Laws of conservation of momentum here:

https://brainly.com/question/7538238

#SPJ11

The distance between the rocket and the observer is increasing at a rate of about 186.6 m/s.

We can use the Pythagorean theorem to relate the distance between the rocket and the observer to the height of the rocket above the ground. Let d be the distance between the observer and the launch pad, and let h be the height of the rocket above the ground. Then,

d^2 = h^2 + 3^2 (1)

We can take the derivative of both sides of equation (1) with respect to time to get,

2d (dd/dt) = 2h (dh/dt) (2)

where (dd/dt) is the rate of change of distance between the observer and the rocket, and (dh/dt) is the rate of change of height of the rocket.

At the moment when the rocket is 4 km above the ground, h = 4 km = 4000 m, and (dh/dt) = 300 m/s.

Substituting these values into equation (2) and solving for (dd/dt),

dd/dt = (h/d) x (dh/dt) = (4000 m / √(4000^2 + 3000^2) m) x (300 m/s)

≈ 186.6 m/s

To know more about speed, here

brainly.com/question/29281805

#SPJ4

On the screen, 200 cm behind the slits, the fringe spacing will be 8 mm.

Due to its dependence on L, the spacings between various fringes get smaller as the distance between the slits gets more. The space between various fringes grows as the light's wavelength rises because this is a wavelength-dependent property.

The equation: gives the screen's fringe spacing in a double-slit experiment.

dsin(theta) = mlambda

The fringe spacing will therefore double if the screen distance is increased from 100 cm to 200 cm.

The new fringe spacing will be as follows:

2 * 4 mm = 8 mm

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ1

To meet all your household energy requirements from solar energy with a 14% efficiency, you will need a solar collector area of approximately 28.57 square meters.

To determine the area of solar collector required to meet your household energy requirements, we can use the following formula:

Collector area = Power requirement / (Solar irradiance x Efficiency)

Where,

Power requirement = 4.0 kW

Efficiency = 14% = 0.14 (as given)

Solar irradiance = average solar irradiance on a surface perpendicular to the sun's rays is approximately 1000 W/m² (at sea level on a clear day)

Plugging in the values, we get:

Collector area = 4.0 kW / (1000 W/m² x 0.14)

Collector area = 28.57 m²

Solar energy refers to the radiant light and heat that is emitted by the sun and captured using various technologies such as solar panels and solar thermal collectors. This energy can then be converted into electricity or used directly for heating and cooling purposes.

Solar energy is a renewable and abundant source of energy, and it is a clean alternative to traditional fossil fuels that release harmful emissions into the environment. It also provides energy independence and reduces dependence on foreign oil.

Solar energy has many applications, ranging from powering homes and businesses to providing electricity for remote areas without access to traditional power grids. It is also used in the transportation sector, with solar-powered vehicles and charging stations becoming increasingly popular.

To learn more about Solar energy visit here:

brainly.com/question/404452

#SPJ4

The inductance of a coil, if the coil produces an emf of 2.50 V when the current in it changes from -29.0 mA to 33.0 mA in 14.0 ms, is 0.146 H.

Inductance of a coil The amount of electromotive force generated across a conductor when there is a change in the current flowing through it is defined as self-inductance.

The unit of inductance is the Henry (H), with the symbol L. The voltage induced in the coil is determined by the current passing through it, as well as the coil's inductance. Faraday's law of electromagnetic induction establishes a link between the two entities.

The principle of electromagnetic induction is defined by Faraday's law, which states that the emf (electromotive force) produced by a change in magnetic flux linkage with time is proportional to the negative of the rate of change of magnetic flux linkage.

When there is a change in magnetic flux passing through a coil, this law predicts that an electromotive force is generated in it.

The acronym emf stands for electromotive force, and it represents the quantity of energy that drives current flow in a circuit. The unit of emf is the volt (V).

The amount of electromotive force generated across a conductor when there is a change in the current flowing through it is defined as self-inductance.

The unit of inductance is the henry (H), with the symbol L.

The inductance of a coil is given by the formula: L = E/(di/dt)

Where L is the inductance of a coil E is the voltage induced in the coil di/dt is the rate of change of current passing through the coil.

Thus, the inductance of a coil, if the coil produces an emf of 2.50 V when the current in it changes from -29.0 mA to 33.0 mA in 14.0 ms, is 0.146 H.

To know more about  inductance of a coil refer here:

https://brainly.com/question/31388862#

#SPJ11

A wooden block has a volume of 12.5 litres and a mass of 5.0 kg. 5.0 litres of water must be displaced if the wooden block is to float.

The density of wood is less than the density of water. As a result, to float on water, an object made of wood must displace an amount of water greater than its weight.

The formula for calculating the density of an object is:

density = mass/volume

Rearranging this equation gives: v

olume = mass/density

From the information given in the question, the mass of the wooden block is 5.0 kg, and the volume is 12.5 liters.

Density is the mass divided by the volume:

density = mass/volume = 5.0 kg / 12.5 L = 0.4 kg/L

To float on water, the density of the wooden block must be less than the density of water, which is 1 kg/L.

Applying the formula above, we can solve for the volume of water displaced by the wooden block, which is equal to the volume of the block:

volume = mass/density = 5.0 kg / 1 kg/L = 5.0 L

Thus, 5.0 liters of water must be displaced if the wooden block is to float.

To know more about volume refer here:

https://brainly.com/question/14325102#

#SPJ11

The inertia of the new cylinder is  0.0566 kgm². Other answers provided are correct.

The moment of inertia of the new cylinder can be calculated using the formula:

I = (M × d²) / (4 × Δθ)

Where:

M = mass of the cylinder

d = distance moved by the mass

Δθ = change in angular displacement (in radians)

Substituting the given values:

I = (1.25 × 0.448²) / (4 × 0.47)

I = 0.0566 kgm²

Therefore, the moment of inertia of the new cylinder is 0.0566 kgm².

Find out more on moment of inertia here: https://brainly.com/question/3406242

#SPJ1

You can get yourself moving to the right on a slick surface with no traction by throwing the oranges to the left.

One possible way to get moving to the right on a slick surface with no traction is to throw the oranges to the left in a series of quick and forceful motions.

According to Newton's third law of motion, every action has an equal and opposite reaction. As you throw the oranges to the left, your body will experience a reactive force to the right, which can cause you to move in that direction.

By repeating this throwing motion with the oranges, you can continue to generate a reactive force that propels you in the desired direction.

More on Newton's third law can be found here: https://brainly.com/question/29768600

#SPJ1