A sound wave is incident on a pool of fresh water (25 °C). The sound enters the water perpendicularly and
travels a distance of 0.45 m before striking a 0.15-m-thick copper block lying on the bottom. The sound passes
through the block, reflects from the bottom surface of the block, and returns to the top of the water along the
same path. How much time elapses between when the sound enters and when it leaves the water?

It is important to note that the dot product and cross product of any two non-zero vectors cannot both be zero therefore  A×B and A·B cannot both be zero.

In vector space, a non-zero vector. V is a vector that differs from the zero vector in V. If u is a non-zero vector in V and an is a scalar, i.e. an element of the field over which V is defined, then au=0 is only possible if a=0.

The product of any two non-zero vectors is non-zero in this vector context. It is referred to as Hamilton's Quaternions. Over the real numbers, quaternions form a four-dimensional vector space, and their multiplication is a combination of dot product and cross product.

Learn more on non-zero vectors here: https://brainly.com/question/24254277

#SPJ1

The coefficient of static friction between the crate and the floor is calculated to be 0.275.

The frictional force when an object moves on the horizontal surface is given as,

Ff = μ N

where, N is the normal force

μ is the coefficient of static or kinematic friction

If no forces other then the weight and the normal are acting upon the y-direction, then the weight and the normal force are equal in magnitude.

N = W = m g

Given that,

Mass of the crate = 26 kg

Frictional force Ff = 70 N

Weight of the crate = 26 × 9.8 = 254.8 N

The normal force is 254.8 N.

The coefficient of static friction μ = Ff /N = 70/254.8 = 0.275

Thus, the coefficient of static friction between the crate and the floor is 0.275.

To know more about friction:

https://brainly.com/question/20162979

#SPJ4

Answer:

Explanation:

period is 2pi / B which is 2pi/8 which is 1/4 pi

amplitude is a which is 10

Answer:

I think the correct answer is the skier at the top.

Explanation:

cause potential energy is equal to mgh.

here mass and gravitational acceleration is same for all 3, but the top fellow has more height

The area of the piston that holds the ride is 8333,33 [tex]cm^{2}[/tex]

For hydraulic press system pressure in = pressure out

P = Pressure

F = Force

A = Area

The formula P = [tex]\frac{F}{A}[/tex]

We know F1 = 72 N, A1 = 30 [tex]cm^{2}[/tex]

                F2 = 20000 N

The area of the piston that holds the ride = A2

P 1 = P2

[tex]\frac{F1}{A1}[/tex]  = [tex]\frac{F2}{A2}[/tex]

[tex]\frac{72 N}{30 cm^{2} }[/tex]   =  [tex]\frac{20000 N}{A2}[/tex]

A2 = 20000 N : ( [tex]\frac{72 N}{30 cm^{2} }[/tex] )

A2 = ( 20000 N x 30 cm2 ) : 72 N

     = 8333,33 cm2

More about hydraulic press at

https://brainly.com/question/15709279

#SPJ4

Answer:

(a) X- axis represent (1/P) inverse of pressure

(b) Y-axis represent (V) volume

Explanation:

Boyle's Law States that at constant temperature, the volume of a fixed mass of gas is inversly proportional to its pressure. It can be expressed mathematically as

V α 1/P

VPα1

removing the proportionality sign and introducing a constant

VP = k

V₁P₁ = V₂P₂

Where V₁ and V₂ are initial and final volume respectively, P₁ and P₂ are initial and final pressure respectively.

If the graph for Boyle's law is straight line through the origin,

(a) X-axis represent (1/P) inverse of pressure

(b) Y- axis represent (V) volume.

The force of gravity between these pairs of objects: a 1-kg mass and a 2-kg mass that are 1 m apart is 13.[tex]10^{-11}[/tex]34N.

For  2 m apart 6.67[tex]10^{-11}[/tex]N.

For 2-kg mass that are 2 m apart; and two 2-kg masses that are 1 m apart is 26.68N.

The resultant (vector sum) of two forces is the force of gravity on Earth: (a) the gravitational pull according to Newton's universal law of gravitation; and (b) the centrifugal force, which is the outcome of choosing an earthbound, rotating frame of reference.

Force between two object is calculated f=Gmm/r^2.

G=6,67*10^-7

To know more about force of gravity visit:-

https://brainly.com/question/13634821

#SPJ1

The tension in the string can be found by using the equation for centripetal force. which is equal to 150.

This equation states that the centripetal force (Fc) is equal to the mass of the object (m) multiplied by the square of the velocity (v) and divided by the radius (r). Therefore,

Fc = m x v²/r.

In this case, the centripetal force is equal to the tension in the string, so the tension in the string (T) can be found by rearranging the centripetal force equation to

T = m x v²/r.

Substituting in the given values for mass (m) and radius (r) gives

T = 0.304 kg x (2.83 m/s)²/0.44 m

T= 150N

Therefore the tension of the string is 150N

Learn more about tension:

https://brainly.com/question/24994188

#SPJ4

A body's mass is the total amount of its material. Gravitational pull on a body is represented by weight.

The relationship between mass and weight Mass is a measure of inertia, whereas weight is a measure of force.

Both of these names are frequently used in the same sentence. Calculating how much matter a body contains requires knowing its mass.

Weight is a unit of measurement for the force that gravity's acceleration has on a mass.

Weight is a measurement of how the force of gravity works upon a mass, whereas mass is a measure of the amount of matter in a material.

In order to determine how much matter a body contains, we need to use its mass.

To learn more about mass and weight refer to:

brainly.com/question/1966951

#SPJ4

Answer:

1) Given acceleration due to gravity as 10N/kg

N/kg is the same as m/s². From W=mg

making g subject ... you have g = W/m

where m is in kg and W is in N

hence we have N/kg

So g=10ms-²

Gravitational Potential Energy=mgh

At height 4m

PE=6 x 10 x 4

=240J.

At height 6m

PE=6 x 10 x 6

=360J.

2) KE=1/2mv²

=1/2 x 6 x 5² =75J

When the speed is doubled... it becomes 2x

so V = 2x5=10ms-¹

KE=1/2 x 6 x 10² =300J.

3) KE=1/2mv²

KE is given as 100J

mass=0.5kg

Making V the subject

you have v² =2KE/m

v²=2 x 100/0.5

v²=400

taking square root

v=20ms-¹.

Have a great day✌

This electricity is then directed from the electric generator to electric outlets in homes

A power source that creates electricity through the use of giant magnets that are rotated to create a flow of electrons is called a generator. Generators use the principle of electromagnetic induction to convert mechanical energy (rotational energy of the magnets) into electrical energy.The electricity generated by the generator is then directed through electrical transmission lines to a substation, where it is transformed to a higher voltage level for long-distance transmission. Then it is distributed to homes and businesses through power lines and transformers.

Learn more about mechanical energy here:

https://brainly.com/question/28928306

#SPJ4

Answer:

एकच

Explanation:

डॉ बाळगू गमच दाखल सकाळी एकदिवसीय

Explanation:

the wave model of electromagnet

The least tension will be experienced by T3

The weight of a moving object causes tension, which is the force applied along the length of a string, rope, or cable. The force that maintains an object moving in a circular direction when it is in a vertical circular motion is called tension. Perpendicular to the circle's radius, the tension in the string is pointed in the direction of the circle's centre.

Due to the centripetal force required to maintain the object moving in a circular motion, the tension in the string varies as the object moves in a vertical circle, with the highest tension occurring at the top of the circle and the least tension occurring at the bottom. In the given case, T3 will experience the least tension during vertical circular motion, assuming that the speed of the ball remains constant. This is because T3 is the point on the string that is closest to the circle's centre, and thus is subject to the least amount of tension as the ball moves in a vertical circle.

Read more about tension on:

https://brainly.com/question/24994188

#SPJ4

The gravitational force of attraction between them is 3.56 * 10⁻⁴ N

F = G*M1M2/d²,

where G = 6.67 * 10⁻¹¹ Nm²Kg⁻²,

M1 = 8000Kg and M2 = 1500 Kg,

F =  6.67 * 10⁻¹¹ * 8000 * 1500 / (1.5)² F = 3.56 * 10⁻⁴ N

The gravitational force of attraction between them is 3.56 * 10⁻⁴ N.

The universal gravitational law of Newton. According to this law, every body in the universe is attracted to every other body with a force that is inversely proportional to the square of the distance between them and proportional to the product of their masses.

Therefore, The gravitational force of attraction between them is 3.56 * 10⁻⁴ N.

To learn more about Gravitational force, refer to the link:

https://brainly.com/question/12528243

#SPJ1

It is true that on looking vertically down into the water the black line appears to be closer that it really is.

A material's refractive index, which is quantified, indicates how much a light path is bent or refracted when it penetrates that material.

The critical angle for total internal reflection and the amount of light that is reflected when it reaches the contact are both determined by the index of refraction.

Due to the refraction of light rays as they pass through water and into the air, an item seen in the water typically appears to be deeper than it actually is.

Since the angle subtended by the object is greater, it "appears" larger because the light's refraction away from the normal changes the angle at which the light appears at the eye.

Thus, the given scenario is true.

For more details regarding refractive index, visit:

https://brainly.com/question/23750645

#SPJ1

Answer: 1.74

Explanation: “How do you calculate the mechanical advantage of a block and tackle pulley?To calculate the mechanical advantage, we can either divide the weight of the object being lifted by the force required to lift it or we can divide the amount of rope we have to pull by the distance the object moves."If we use the rope method the mech advantage is  33.0/16.5 = 2   now if we use the forces   MA = 225/129 =1.74 <==== this is not equal to '2' as we first found due to energy being lost to friction/deformation of rope etc.              SO I would say the truemechanical advantage = 1.74  Efficiency =  1.74/2 = 87%

Torque is produced by multiplying the length of a lever arm by the force acting perpendicular to the lever arm. There are two conceivable orientations for the scalar quantity torque: clockwise and anticlockwise.

A torque is created when a force is applied perpendicular to a lever arm. The lever arm or moment arm is the length that extends perpendicularly from the pivot point, or the centre of rotation, to the point at which the force is applied. A torque is always defined with reference to a pivot point.

A torque multiplier multiplies the torque applied to the bolt with each gearing level. For instance, a 5:1 torque multiplier will result in an output.For example, a torque multiplier with a 5:1 ratio will result in an output at the shaft that is five times the torque, but the speed will only be one fifth of the original since no energy can be created.

For more such question on torque and force.

https://brainly.com/question/17512177

#SPJ4

The minimum-size copper equipment grounding conductor required for the circuit is 1/0 kcmil.

Learn more about conductors here:

https://brainly.com/question/492289

#SPJ4

[tex] \huge{ \texttt{ANSWERS}}[/tex]

MAGNETIZATION

Answer:

because potential energy is the kinetic energy something COULD have. Like when a rollercoaster is about to go over a bump, before it goes down it has potential energy, then when it goes it accelerates and creates kinetic energy. That rock be zero cause it has no potential

Explanation:

The ideal mechanical advantage is 5.

Here, we have value larger radius , R = 20 cm and smaller radius = 4 cm

So, as per the problem, mechanical advantage will be 20/4 = 5.

A wheel and axle must be permanently joined in order to be considered a simple machine, and the wheel must by definition have a bigger radius than the axle. A point on the wheel moves a distance of 2 R whereas a point on the axle moves a distance of 2 r when you turn the wheel through a full revolution, which likewise causes the axle to turn through a full revolution.

The force you apply F R times the distance the point moves equals the effort W required to move a point on the wheel through one full revolution. Work is energy, and since energy must be conserved, a point on the axle must be subjected to a larger force F r because it moves a shorter distance.

The mathematical relationship is:

W = Fr (subscript) ×2πr/θ =F r(subscript) ×2πR/θ

Where ​θ​ is the angle that the wheel is turned.

And therefore:

Fr(r in subscript) / FR(R in subscript) = R/r

Learn more about mechanical advantage here :

brainly.com/question/16617083

#SPJ4

Explanation:

Distance is 250m

Time is 50sec

Formular

Speed= distance/time

Speed=250/50

Speed is 5m/s

If correct mark as brainliest

Answer:

[tex]\boxed {\boxed {\sf 5 \ m/s}}[/tex]

Explanation:

Speed is the rate an object moves. It is found by dividing the distance by the time.

[tex]s=\frac{d}{t}[/tex]

Kenny and Chris walked a distance of 250 meters in 50 seconds. So:

Substitute the values into the formula.

[tex]s=\frac{250 \ m}{ 50 \ s}[/tex]

Divide.

[tex]s= 5 \ m/s[/tex]

Kenny and Chris had an average speed of 5 meters per second.

When feelings of anxiety and worry become excessive, out of control, and interfere with daily life, they can develop into pathological diseases called anxiety disorders. So the correct option is (c).

Anxiety disorders are characterized by feelings of apprehension and fear, which are normal human emotions. However, when these feelings become excessive, uncontrollable, and affect daily life, they can be considered a pathological disorder. Anxiety disorders can affect a person's ability to perform daily activities, such as work or school, and can also cause physical symptoms such as insomnia, muscle tension, and fatigue. These disorders can be recurrent, but they need to be excessive, uncontrollable, and affect daily life in order to be considered pathological.

To know more about anxiety disorders please refer: https://brainly.com/question/14756327

#SPJ4

just ask safari

Explanation:

So because acceleration of freely falling objects is constant, if a 5 kilogram object starts free falling at rest, its acceleration at 3 seconds is g=9.8 m/s2 or 32.2 ft/s2.

As the gravitational pull of an object changes as it is moved further away from Earth or placed on another planet, so does the object's weight. Regardless of whether an object is on Planet, in deep space, or on the Moon, its mass will always be the same.

For  the gravitational force the formula is P.E. = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 m / s2 at the surface of the earth) and h is the height in meters. Notice that gravitational potential energy has the same units as kinetic energy, kg m2 / s2.

TO know more about acceleration  visit :

https://brainly.com/question/12550364

#SPJ4

The friction force required to keep the car from sliding is 9000N.

mass of car, m = 1000 kg

speed , v = 30 m/s

diameter , d = 0.2 km

r = 100 m

for the car to keep from sliding frictional force is required, ff = m*v^2/r

ff = 1000 * 30^2 /100

ff = 9000 N

the friction force required is 9000 N

Simply put, an unbanked curve (or turn) is a curve that is flat on the ground (parallel to the horizontal). A force of friction applies to the car as it drives along one of these curves, keeping it rotating in a circular course.

to know more about friction force here:

brainly.com/question/30280752

#SPJ4

Answer:

Explanation:

option 1 - A and B move with the same speed INCORRECT because the lines have different slopes

option 2 - B moves with non-uniform speed  INCORRECT because the line for B is straight

option 3 - A completes his journey early INCORRECT because A ends his journey at about 11:45 after going about 42 km. B finishes his journey at about 11:35.

option 4 - B overtakes A at 11:10 a.m.  CORRECT.  They meet at the 30 km mark at 11:10, which is where the lines intersect.

The new velocity of the object after the event is 7.99m/s.

We are given that,

Mass = m = 50kg

Initial velocity = v = 11.2m/s

Energy = E = 1539j

The kinetic energy of object can be calculated as,

K= (1/2)mv²

K = (50×125.44)/2

K = 3136J

Consequently, since both the initial kinetic energy and the total amount of energy transferred are known. The article's resulting energy is easily discernible.

Final energy = initial kinetic energy - the ending energy

Final energy  = 3136-1539= 1597 joules

Therefore, using the equation for kinetic energy derivation, the speed of the object can now be determined.

K.E = 1/2MV²

1597 = 50/2V²

3194 = 50V²

V = 7.99m/s

Therefore , the new velocity of the object after the event would be 7.99m/s.

To know more about velocity

https://brainly.com/question/24926862

#SPJ4

According to the given statement The ships average acceleration is 2790 km/hr².

Rate of change in both speed and direction of motion over time. A point or object going straight forward is accelerated when it accelerates or decelerates. Even though the speed is constant, motion on a circle accelerates because of direction is always shifting

We know that from newton's equation,

v² + u² = 2as

S = ut + 0.5 at²

Where, v = final speed

           u = initial speed

           a = acceleration

           S = distance covered

            t = time taken

Given, u = 0

So the equations becomes:

v² = 2as

S = 0.5 at²

Using these equations we get:

v² = 2a(0.5)at²

v² = a²t²

v = at

v/t = a

Given,  v = 93 km/hr

          t = 2 min = 2/60 hr

Putting these values in above equation we get, a = 2790 km/hr²

So, the ships average acceleration is 2790 km/hr²

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ1