(a) The magnitude of the magnetic force on the wire section is approximately 0.127 N.
(b) The direction of the magnetic force cannot be determined without information about the orientation of the wire and the direction of the current.
(a) The magnitude of the magnetic force (F) on a current-carrying wire in a magnetic field can be calculated using the formula:
F = I × L × B × sin(θ)
Where:
I is the current in the wire,
L is the length of the wire segment,
B is the magnitude of the magnetic field, and
θ is the angle between the direction of the current and the magnetic field.
Given that the current (I) is 2.7 A, the length (L) is 13 cm (or 0.13 m), and the magnetic field (B) is 0.35 T, and the wire is placed perpendicular to the magnetic field (θ = 90°), we can calculate the magnitude of the magnetic force:
F = 2.7 A × 0.13 m × 0.35 T × sin(90°)
F ≈ 0.127 N
Therefore, the magnitude of the magnetic force on the wire section is approximately 0.127 N.
(b) The given information does not provide the orientation or direction of the wire with respect to the magnetic field. The direction of the magnetic force depends on the direction of the current and the direction of the magnetic field, which are not specified in the problem statement. Therefore, without knowing the orientation of the wire or the direction of the current, we cannot determine the direction of the magnetic force.
Learn more about Magnetic field here: https://brainly.com/question/30236241
#SPJ11
As an electromagnetic wave travels through free space, its speed can be increased by Increasing the Increasing frequency ng menim None of the above will increase its speed Justify your answer to the previous question by writing a brief answer in the text box below. Use this information for this and the next two question. Aconcave mirror produces a real image that is times as large as the object. The oblecta located 8.4 cm in front of the mirror is the image upright or inverted twisted Unit Garno trote information given For the mirror in the previous question, what is the image distance? Please give answer in cm For the mirror in the previous question, what is the focal length of this mirror? Please give answer in cm
The image distance for the given concave mirror is 16.8 cm, and the focal length of the mirror is 4.2 cm.
The image distance for a concave mirror can be calculated using the mirror formula:
1/f = 1/v - 1/u
where f is the focal length of the mirror, v is the image distance, and u is the object distance.
Given that the object distance is 8.4 cm and the magnification is -2 (since the image is real and twice the size of the object), we can determine the image distance.
Using the magnification formula:
magnification = -v/u = -h_i/h_o
where h_i is the image height and h_o is the object height, we can substitute the given values:
-2 = -h_i/h_o
Since the image height is twice the object height, we have:
-2 = -2h_o/h_o
Simplifying, we find:
h_o = -1 cm
Since the object height is negative, it indicates that the image is inverted.
To calculate the image distance, we use the mirror formula:
1/f = 1/v - 1/u
Substituting the known values:
1/4.2 = 1/v - 1/8.4
Simplifying further, we find:
1/v = 1/4.2 + 1/8.4 = (2 + 1)/8.4 = 3/8.4
Thus, the image distance can be determined by taking the reciprocal of both sides:
v = 8.4/3 = 2.8 cm
Therefore, the image distance for the given concave mirror is 2.8 cm.
Learn more about Image distance
brainly.com/question/29659384
#SPJ11
In a nuclear reaction two identical particles are created, traveling in opposite directions. If the speed of each particle is 0.82c, relative to the laboratory frame of reference, what
is one particle's speed relative to the other particle?
In a nuclear reaction two identical particles are created, traveling in opposite directions. If the speed of each particle is 0.82c, relative to the laboratory frame of reference. The particle's speed relative to the other particle is 1.64c.
In the laboratory frame of reference, both particles have the same speed, v, which is 0.82c.In the frame of reference of one of the particles, the other is moving in the opposite direction, and its velocity is -0.82c.
Let's calculate this now using the relativistic velocity addition formula, which is:v' = (v + u) / (1 + (vu) / c²)Where: v' is the relative velocity between the two particles,v is the velocity of one of the particles, and u is the velocity of the other particle u = -0.82c (since it is moving in the opposite direction)v' = (v - 0.82c) / (1 - (0.82c * v) / c²) = (v - 0.82c) / (1 - 0.6724v) When two particles are created in a nuclear reaction, their speed relative to each other is 1.64c.
Learn more about speed:
brainly.com/question/13943409
#SPJ11
Charge of uniform density 4.0 nC/m is distributed along the
x axis from x = 2.0 m to x = +3.0
m. What is the magnitude of the electric field at the
origin?
The magnitude of the electric field at the origin due to the charge distribution along the x-axis is zero, resulting in a net cancellation of the electric field contributions.
To find the magnitude of the electric field at the origin, we can use the principle of superposition. We divide the charge distribution into small segments, each with a length Δx and a charge ΔQ.
Given:
Charge density (ρ) = 4.0 nC/m
Range of distribution: x = 2.0 m to x = 3.0 m
We can calculate the total charge (Q) within this range:
Q = ∫ρ dx = ∫4.0 nC/m dx (from x = 2.0 m to x = 3.0 m)
Q = 4.0 nC/m * (3.0 m - 2.0 m)
Q = 4.0 nC
Next, we calculate the electric field contribution from each segment at the origin:
dE = k * (ΔQ / r²), where k is the Coulomb's constant, ΔQ is the charge of the segment, and r is the distance from the segment to the origin.
Since the charge distribution is uniform, the electric field contributions from each segment will have the same magnitude and cancel out in the x-direction due to symmetry.
Therefore, the net electric field at the origin will be zero.
To know more about electric,
https://brainly.com/question/31173598#
#SPJ11
In unit-vector notation, what is the net torque about the origin on a flea located at coordinates (0, -8.15 m, 2.07 m) when forces
F, = (4.01 N )R and F, = (-7.69 N ) act on the flea?
Torque is a concept in physics that describes the rotational force applied to an object. It is also known as the moment of force. The net torque about the origin on the flea is given by -7.6193 j + 29.91235 k (in unit-vector notation).
Torque is a vector quantity, meaning it has both magnitude and direction. Its direction is perpendicular to the plane formed by the displacement vector and the force vector, following the right-hand rule. The SI unit of torque is the Newton-meter (N·m) or the Joule (J).
In practical terms, torque is responsible for causing objects to rotate or change their rotational motion. It is essential in various applications, such as opening a door, tightening a bolt, or spinning a wheel. Torque plays a crucial role in understanding the mechanics of rotating systems and is a fundamental concept in physics and engineering.
To find the torque, we need to calculate the cross-product of the position vector and the force vector.
Given:
Position vector, r = (0, -8.15 m, 2.07 m)
Force vector, F1 = (4.01 N)R
Force vector, F2 = (-7.69 N)
The cross product of two vectors in unit-vector notation can be calculated using the following formula:
[tex]A * B = (AyBz - AzBy) i + (AzBx - AxBz) j + (AxBy - AyBx) k[/tex]
Let's calculate the torque caused by F1:
[tex]\tau1 = r * F1\\= (0, -8.15 m, 2.07 m) * (4.01 N)R\\= (0 * 4.01) i + (2.07 * 4.01) j + (-8.15 * 4.01) k\\= 0 i + 8.303 j - 32.73115 k[/tex]
Now, let's calculate the torque caused by F2:
[tex]\tau2 = r * F2\\= (0, -8.15 m, 2.07 m) * (-7.69 N)\\= (0 * -7.69) i + (2.07 * -7.69) j + (-8.15 * -7.69) k\\= 0 i - 15.9223 j + 62.6435 k[/tex]
To find the net torque, we sum up these individual torques:
[tex]\tau_{net} = \tau1 + \tau2\\= (0 i + 8.303 j - 32.73115 k) + (0 i - 15.9223 j + 62.6435 k)\\= 0 i + (8.303 - 15.9223) j + (-32.73115 + 62.6435) k\\= -7.6193 j + 29.91235 k[/tex]
Therefore, the net torque about the origin on the flea is given by -7.6193 j + 29.91235 k (in unit-vector notation).
For more detail regarding torque, visit:
https://brainly.com/question/30338175
#SPJ4
An electric cart, initially moving at 8 m/s, accelerates for 5 sec over a distance of 50 m. a. What is its acceleration? b. What is its average velocity?
a. The acceleration of the electric cart is 2 m/s².
b. The average velocity of the electric cart is 12 m/s.
a. To calculate the acceleration, we can use the formula:
acceleration = change in velocity / time
Given that the initial velocity (u) is 8 m/s, the final velocity (v) is unknown, and the time (t) is 5 seconds, we can rearrange the formula as:
acceleration = (v - u) / t
Substituting the values, we have:
acceleration = (v - 8 m/s) / 5 s
To find the final velocity, we need additional information. If we assume that the cart's acceleration is constant over the entire 5-second period, we can use the formula:
distance = initial velocity * time + (1/2) * acceleration * time²
Given that the distance is 50 m and the time is 5 s, we can rearrange the formula to solve for the final velocity:
50 m = 8 m/s * 5 s + (1/2) * acceleration * (5 s)²
Simplifying the equation, we have:
50 m = 40 m + (1/2) * acceleration * 25 s²
10 m = (1/2) * acceleration * 25 s²
Dividing both sides by 25 s² and multiplying by 2, we get:
acceleration = 2 m/s²
Therefore, the acceleration of the electric cart is 2 m/s².
b. The average velocity can be calculated using the formula:
average velocity = total displacement / total time
Since the cart is accelerating, its velocity is not constant. However, the average velocity can still be calculated by considering the initial and final velocities.
Using the formula:
average velocity = (initial velocity + final velocity) / 2
Substituting the values, we have:
average velocity = (8 m/s + v) / 2
To find the final velocity, we can use the equation derived in part a:
50 m = 8 m/s * 5 s + (1/2) * 2 m/s² * (5 s)²
50 m = 40 m + 25 m
The total displacement is 50 m.
Substituting the displacement into the average velocity formula, we have:
average velocity = (8 m/s + v) / 2 = 50 m / 5 s = 10 m/s
Simplifying the equation, we get:
8 m/s + v = 20 m/s
v = 20 m/s - 8 m/s
v = 12 m/s
Therefore, the average velocity of the electric cart is 12 m/s.
To know more about acceleration refer here:
https://brainly.com/question/30660316#
#SPJ11
If our Sun shrank in size to become a
black hole, discuss and SHOW from the
gravitational force equation that
Earth's orbit would not be affected.
If the Sun became a black hole, Earth's orbit would remain unaffected because the gravitational force equation shows that the masses and distances involved in the orbit would remain the same.
If the Sun were to shrink in size and become a black hole, the total mass of the Sun would remain the same. The gravitational force equation states:
F = (G * m1 * m2) / r²,
where:
F is the gravitational force,G is the gravitational constant,m1 and m2 are the masses of the two objects involved, andr is the distance between the centers of the two objects.In the case of Earth orbiting the Sun, Earth's mass (m2) is significantly smaller than the mass of the Sun (m1). Therefore, if the Sun were to become a black hole with the same mass, the gravitational force equation would still hold.
The orbit of Earth around the Sun is determined by the balance between the gravitational force acting towards the center of the orbit and the centripetal force keeping Earth in a circular path. The centripetal force is given by:
Fc = (m2 * v²) / r,
where:
Fc is the centripetal force,m2 is the mass of Earth,v is the velocity of Earth, andr is the radius of Earth's orbit.Since the mass of Earth (m2) and the radius of Earth's orbit (r) remain the same, the centripetal force does not change.
Now, let's consider the gravitational force between Earth and the Sun. The gravitational force equation is:
Fs = (G * m1 * m2) / r²,
where:
Fs is the gravitational force between Earth and the Sun.If the Sun were to become a black hole, its mass (m1) would remain the same. Since the mass of Earth (m2) and the radius of Earth's orbit (r) also remain the same, the gravitational force (Fs) between Earth and the Sun would not change.
Therefore, the balance between the gravitational force and the centripetal force that determines Earth's orbit would remain unaffected if the Sun were to shrink in size and become a black hole. Earth would continue to orbit the black hole in the same manner as it orbits the Sun.
To learn more about gravitational force, Visit:
https://brainly.com/question/72250
#SPJ11
The Law of Conservation of Mass states that
a. no change in the mass of any individual reactant occurs in an isolated system during the course of a chemical reaction.
b. no change in the mass of any individual product occurs in an isolated system during the course of a chemical reaction.
c. The mass of an isolated system after a chemical reaction is always greater than it is before the reaction.
d. no change in total mass occurs in an isolated system during the course of a chemical reaction.
The basic model of the atom can be described as follows:
It a. has an integer number of negatively charged particles called protons grouped together in a small nucleus at the center and is surrounded by an equal number of positively charged particles called electrons that orbit it.
b. It has an integer number of positively charged particles called electrons grouped together in a small nucleus at the center and is surrounded by an equal number of negatively charged particles called protons that orbit it.
c. It has an integer number of negatively charged particles called electrons grouped together in a small nucleus at the center and is surrounded by an equal number of positively charged particles called protons that orbit it.
d. It has an integer number of positively charged particles called protons grouped together in a small nucleus at the center and is surrounded by an equal number of negatively charged particles called electrons that orbit it.
The Law of Conservation of Mass states that no change in total mass occurs in an isolated system during the course of a chemical reaction.
In other words, the total mass of the reactants in a chemical reaction is always equal to the total mass of the products. This law was first proposed by Antoine Lavoisier in 1789 and is considered one of the fundamental laws of chemistry.
The basic model of the atom can be described as follows: It has an integer number of positively charged particles called protons grouped together in a small nucleus at the center and is surrounded by an equal number of negatively charged particles called electrons that orbit it. This model is commonly known as the Rutherford-Bohr model of the atom and is still used today as a simple way to understand the structure of atoms.
In summary, the Law of Conservation of Mass states that no change in total mass occurs in an isolated system during a chemical reaction and the basic model of the atom has protons in the nucleus and electrons orbiting around it.
To know more about Conservation of Mass visit:
https://brainly.com/question/14549722
#SPJ11
The Space Shuttle travels at a speed of about 5.41 x 103 m/s. The blink of an astronaut's eye lasts about 95.8 ms. How many football fields (length = 91.4 m) does the Space Shuttle cover in the blink of an eye?
the Space Shuttle covers approximately 5.68 football fields in the blink of an eye.
To calculate the number of football fields the Space Shuttle covers in the blink of an eye, we can use the formula:
Distance = Speed × Time
First, let's convert the speed of the Space Shuttle from meters per second to football fields per second.
1 football field = 91.4 meters
Speed of the Space Shuttle = 5.41 × 10^3 m/s
So, the speed of the Space Shuttle in football fields per second is:
Speed in football fields per second = (5.41 × 10^3 m/s) / (91.4 m) = 59.23 football fields per second
Now, we can calculate the distance covered by the Space Shuttle in the blink of an eye, which is 95.8 milliseconds or 0.0958 seconds:
Distance = Speed × Time
Distance = (59.23 football fields/second) × (0.0958 seconds)
Distance ≈ 5.68 football fields
Therefore, the Space Shuttle covers approximately 5.68 football fields in the blink of an eye.
Learn more about Distance here :
https://brainly.com/question/13034462
#SPJ11
A 200 W motor is connected to a 100 V circuit that is protected by a 10 A fuse. This means the fuse will open (blow) and stop current if the current
exceeds 10 A. Will the fuse blow?
The fuse will not blow because the current drawn by the 200 W motor is 2 A, which is less than the rated current of the 10 A fuse.
To determine if the fuse will blow, we need to calculate the current drawn by the 200 W motor when connected to the 100 V circuit. We can use Ohm's Law, which states that the current (I) is equal to the power (P) divided by the voltage (V):
I = P / V
Power of the motor (P) = 200 W
Voltage of the circuit (V) = 100 V
Substituting the given values into the formula, we have:
I = 200 W / 100 V
I = 2 A
The calculated current is 2 A. Since the current is less than the rated current of the fuse (10 A), the fuse will not blow.
To learn more about current visit : https://brainly.com/question/1100341
#SPJ11
20. [0/1 Points] DETAILS PREVIOUS ANSWERS SERCP10 24.P.017. 2/4 Submissions Used MY NOTES A thin layer of liquid methylene iodide (n = 1.756) is sandwiched between two flat, parallel plates of glass (n = 1.50). What must be the thickness of the liquid layer if normally incident light with 2 = 334 nm in air is to be strongly reflected? nm Additional Materials eBook
The thickness of the liquid layer required for strong reflection of normally incident light with a wavelength of 334 nm in air is approximately 293.252 nm.
To determine the thickness of the liquid layer needed for strong reflection of normally incident light, we can use the concept of interference in thin films.
The phase change upon reflection from a medium with higher refractive index is π (or 180 degrees), while there is no phase change upon reflection from a medium with lower refractive index.
We can use the relationship between the wavelengths and refractive indices:
λ[tex]_l_i_q_u_i_d[/tex]/ λ[tex]_a_i_r[/tex] = n[tex]_a_i_r[/tex] / n[tex]_l_i_q_u_i_d[/tex]
Substituting the given values:
λ[tex]_l_i_q_u_i_d[/tex]/ 334 nm = 1.00 / 1.756
Now, solving for λ_[tex]_l_i_q_u_i_d[/tex]:
λ_[tex]_l_i_q_u_i_d[/tex]= (334 nm) * (1.756 / 1.00) = 586.504 nm
Since the path difference 2t must be an integer multiple of λ_liquid for constructive interference, we can set up the following equation:
2t = m *λ[tex]_l_i_q_u_i_d[/tex]
where "m" is an integer representing the order of the interference. For strong reflection (maximum intensity), we usually consider the first order (m = 1).
Substituting the values:
2t = 1 * 586.504 nm
t = 586.504 nm / 2 = 293.252 nm
Therefore, the thickness of the liquid layer required for strong reflection of normally incident light with a wavelength of 334 nm in air is approximately 293.252 nm.
To know more about wavelength refer here:
https://brainly.com/question/29548846
#SPJ11
A student builds a rocket-propelled cart for a science project. Its acceleration is not quite high enough to win a prize, so he uses a larger rocket engine that provides 36% more thrust, although doing so increases the mass of the cart by 12%.
The new acceleration is approximately 21.4% higher than the original acceleration.
By using a larger rocket engine, the student increased the thrust of the rocket-propelled cart by 36%. However, this also increased the mass of the cart by 12%.
These changes will affect the acceleration of the cart. To find the new acceleration, we can use Newton's second law, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration.
Since the force is directly proportional to the thrust, we can say that the new force is 1.36 times the original force. Similarly, the new mass is 1.12 times the original mass.
By rearranging the formula, we can find the new acceleration:
new force = new mass x new acceleration.
Solving for acceleration, we get a new acceleration that is 1.36/1.12
= 1.214 times the original acceleration.
To know more about acceleration visit:-
https://brainly.com/question/2303856
#SPJ11
Suppose that the golf ball is launched with a speed of 25.0 m/s at an angle of 57.5° above the horizontal, and that it lands on a green 3.50 m above the level where it was struck. a. What horizontal distance (the range) does the ball cover during its flight? b. What is the maximum height this golf ball goes to?
The horizontal distance (range) covered by the golf ball is 103 m and the maximum height reached by the golf ball is 32.4 m.
a. Horizontal distance covered by the golf ball = 103 m
Given, the initial velocity of the golf ball, u = 25.0 m/s
Angle of projection, θ = 57.5°
Height of the green above the level of projection, h = 3.50 m
We have to find the horizontal distance covered by the golf ball during its flight. Let's call it R.
It is given that the golf ball is launched at an angle of 57.5° above the horizontal.
Thus, the vertical component of the initial velocity, uy = u sin θ and the horizontal component of the initial velocity, ux = u cos θ.
We know that the time of flight of the ball, t = (2u sin θ) / g
and the range of the ball, R = u² sin 2θ / g
where g is the acceleration due to gravity = 9.8 m/s².
Substituting the values, R = (25² sin 115°) / 9.8 = 103 mb.
Maximum height reached by the golf ball = 32.4 m
We have to find the maximum height reached by the golf ball. Let's call it H.
The maximum height reached by the ball is given byH = (uy)² / 2g
Here, uy = u sin θ = 25 sin 57.5° = 20.45 m/s
So, H = (20.45²) / (2 × 9.8) = 32.4 m
Therefore, the horizontal distance (range) covered by the golf ball is 103 m and the maximum height reached by the golf ball is 32.4 m.
Learn more about velocity at: https://brainly.com/question/80295
#SPJ11
A rubber band is used to launch a marble across the floor. The rubber band acts as a spring with a spring constant of 70 N/m. I pull the 7g marble back 12 cm from its equilibrium position and release it to launch it across the room from a starting height of 1.5 m .
6. What system of objects should I use if I want to use conservation of energy to analyze this situation? What interactions do I need to consider.
7. I launch the marble with an initial velocity that is 30 ° above the horizontal. The height of the marble will change during the launch. Write out the conservation of energy equation that will tell us the launch speed.
8. Determine the launch speed.
9. Think about the launch as an instance of (approximately) simple harmonic motion. How long does it take for the marble to be launched?
10. Where does the marble land, assuming it lands on the floor?
Both potential energy and kinetic energy must be considered in this scenario. The launch speed of the marble is 2.18 m/s.The marble lands on the floor 1.04 m from its initial position.
6. The system of objects that should be used if you want to use conservation of energy to analyze this situation are as follows. The rubber band, the marble, and the floor. When you release the marble, the energy stored in the rubber band (potential energy) is converted into the energy of motion (kinetic energy) of the marble. Therefore, both potential energy and kinetic energy must be considered in this scenario.
7. The conservation of energy equation that will tell us the launch speed is given by the following expression:Initial potential energy of rubber band = Final kinetic energy of marble + Final potential energy of marbleWe can calculate the initial potential energy of the rubber band as follows: Uinitial = 1/2 k x²Uinitial = 1/2 × 70 N/m × (0.12 m)²Uinitial = 0.504 JWhere,Uinitial = Initial potential energy of rubber bandk = Spring constantx = Displacement of the rubber band from the equilibrium positionWe can calculate the final kinetic energy of the marble as follows:Kfinal = 1/2 mv²Kfinal = 1/2 × 0.007 kg × v²Where,Kfinal = Final kinetic energy of marblev = Launch velocity of the marbleWe can calculate the final potential energy of the marble as follows:Ufinal = mghUfinal = 0.007 kg × 9.8 m/s² × 1.5 mUfinal = 0.103 JWhere,Ufinal = Final potential energy of marblem = Mass of marbleh = Height of marble from the groundg = Acceleration due to gravityWe can now substitute the values of Uinitial, Kfinal, and Ufinal into the equation for conservation of energy:Uinitial = Kfinal + Ufinal0.504 J = 1/2 × 0.007 kg × v² + 0.103 J
8. Rearranging the equation for v, we get:v = sqrt [(Uinitial - Ufinal) × 2 / m]v = sqrt [(0.504 J - 0.103 J) × 2 / 0.007 kg]v = 2.18 m/sTherefore, the launch speed of the marble is 2.18 m/s.
9. The launch can be thought of as an example of simple harmonic motion since the rubber band acts as a spring, which is a system that exhibits simple harmonic motion. The time period of simple harmonic motion is given by the following expression:T = 2π √(m/k)Where,T = Time period of simple harmonic motionm = Mass of marblek = Spring constant of rubber bandWe can calculate the time period as follows:T = 2π √(m/k)T = 2π √(0.007 kg/70 N/m)T = 0.28 sTherefore, it takes approximately 0.28 s for the marble to be launched.
10. Since the initial velocity of the marble has a vertical component, the marble follows a parabolic trajectory. We can use the following kinematic equation to determine the horizontal distance traveled by the marble:x = v₀t + 1/2at²Where,x = Horizontal distance traveled by marvlev₀ = Initial horizontal velocity of marble (v₀x) = v cos θ = 2.18 m/s cos 30° = 1.89 m/st = Time taken for marble to landa = Acceleration due to gravity = 9.8 m/s²When the marble hits the ground, its height above the ground is zero. We can use the following kinematic equation to determine the time taken for the marble to hit the ground:0 = h + v₀yt + 1/2ayt²Where,h = Initial height of marble = 1.5 mv₀y = Initial vertical velocity of marble = v sin θ = 2.18 m/s sin 30° = 1.09 m/sy = Vertical displacement of marble = -1.5 m (since marble lands on the floor)ay = Acceleration due to gravity = -9.8 m/s² (negative because the acceleration is in the opposite direction to the initial velocity of the marble)Substituting the values into the equation and solving for t, we get:t = sqrt[(2h)/a]t = sqrt[(2 × 1.5 m)/9.8 m/s²]t = 0.55 sTherefore, the marble takes approximately 0.55 s to hit the ground.Using this value of t, we can now calculate the horizontal distance traveled by the marble:x = v₀t + 1/2at²x = 1.89 m/s × 0.55 s + 1/2 × 0 × (0.55 s)²x = 1.04 mTherefore, the marble lands on the floor 1.04 m from its initial position.
Learn more about energy:
https://brainly.com/question/29792091
#SPJ11
An
object is located at the focal point of a diverging lens. The image
is located at:
a. 3f/2
b. -f
c. At infinity
d. f
e. f/2
The image formed by a diverging lens when an object is located at its focal point is located at infinity.
When an object is located at the focal point of a diverging lens, the rays of light that pass through the lens emerge as parallel rays. This is because the diverging lens causes the light rays to spread out. Parallel rays of light are defined to be those that appear to originate from a point at infinity.
Since the rays of light are effectively parallel after passing through the diverging lens, they do not converge or diverge further to form a real image on any physical surface. Instead, the rays appear to come from a point at infinity, and this is where the virtual image is formed.
Therefore, the correct answer is c. At infinity.
To learn more about focal point click here:
brainly.com/question/32157159
#SPJ11
kg⋅m/s (b) If the player's fist is in contact with the ball for 0.0600 s, find the magnitude of the average force exerted on the player's fist.
The magnitude of the average force exerted on the player's fist can be found by dividing the change in momentum by the contact time between the player's fist and the ball.
To find the magnitude of the average force exerted on the player's fist, we can use the principle of impulse. The impulse experienced by an object is equal to the change in momentum it undergoes. In this case, the impulse exerted on the ball by the player's fist is equal to the change in momentum of the ball.
The impulse can be calculated using the formula:
Impulse = Change in momentum = Final momentum - Initial momentum
Since the ball is initially at rest, its initial momentum is zero. Therefore, the impulse simplifies to:
Impulse = Final momentum
The final momentum of the ball can be calculated using the formula:
Momentum = Mass × Velocity
Given that the ball has a mass of 0.150 kg and a final velocity of 12.0 m/s, we can calculate the final momentum:
Final momentum = 0.150 kg × 12.0 m/s = 1.8 kg⋅m/s
Now, we need to find the contact time between the player's fist and the ball, which is given as 0.0600 s.
Finally, to determine the magnitude of the average force exerted on the player's fist, we divide the change in momentum (which is equal to the impulse) by the contact time:
Average force = Impulse ÷ Contact time = Final momentum ÷ Contact time
Plugging in the values, we get:
Average force = 1.8 kg⋅m/s ÷ 0.0600 s = 30 N
To learn more about force -
brainly.com/question/14471088
#SPJ11
The flow of blood through an aorta can be measured indirectly using a Hall sensor. When used correctly, the sensor's probe measures a voltage of 2.65mV across an aorta of diameter 2.56 cm when a 0.300 T magnetic field is applied perpendicular to the aorta. What must be the speed of the blood (in cm/s ) flowing through the aorta?
The speed of the blood flowing through the aorta is approximately 0.00345 cm/s.
To determine the blood speed, we can apply the principle of electromagnetic flow measurement. The Hall sensor measures the voltage across the aorta, which is related to the speed of the blood flow. The voltage, in this case, is caused by the interaction between the blood, the magnetic field, and the dimensions of the aorta.
The equation relating these variables is V = B * v * d, where V is the measured voltage, B is the magnetic field strength, v is the velocity of the blood, and d is the diameter of the aorta. Rearranging the equation, we can solve for v: v = V / (B * d).
Measured voltage (V) = 2.65 mV
Magnetic field strength (B) = 0.300 T
Diameter of the aorta (d) = 2.56 cm
Using the equation v = V / (B * d), we can substitute the values and calculate the speed (v):
v = 2.65 mV / (0.300 T * 2.56 cm)
v = 0.00265 V / (0.300 T * 2.56 cm)
v = 0.00265 V / (0.768 T·cm)
v ≈ 0.00345 cm/s
To learn more about magnetic field: https://brainly.com/question/30331791
#SPJ11
an electron is moving east in a uniform electric field of 1.50 n/c directed to the west. at point a, the velocity of the electron is 4.45×105 m/s pointed toward the east. what is the speed of the electron when it reaches point b, which is a distance of 0.370 m east of point a?
The speed of the electron when it reaches point b is approximately 4.45×10^5 m/s.
The acceleration of an electron in a uniform electric field is given by the equation:
a = q * E / m
where a is the acceleration, q is the charge of the electron (-1.6 x 10^-19 C), E is the electric field strength (-1.50 N/C), and m is the mass of the electron (9.11 x 10^-31 kg).
Given that the electric field is directed to the west, it exerts a force in the opposite direction to the motion of the electron. Therefore, the acceleration will be negative.
The initial velocity of the electron is 4.45 x 10^5 m/s, and we want to find its speed at point b, which is a distance of 0.370 m east of point a. Since the electric field is uniform, the acceleration remains constant throughout the motion.
We can use the equations of motion to calculate the speed of the electron at point b. The equation relating velocity, acceleration, and displacement is:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
Since the initial velocity (u) and the acceleration (a) have opposite directions, we can substitute the values into the equation:
v^2 = (4.45 x 10^5 m/s)^2 - 2 * (1.50 N/C) * (9.11 x 10^-31 kg) * (0.370 m)
v^2 ≈ 1.98 x 10^11 m^2/s^2
v ≈ 4.45 x 10^5 m/s
Therefore, the speed of the electron when it reaches point b, approximately 0.370 m east of point a, is approximately 4.45 x 10^5 m/s.
The speed of the electron when it reaches point b, which is a distance of 0.370 m east of point a, is approximately 4.45 x 10^5 m/s. This value is obtained by calculating the final velocity using the equations of motion and considering the negative acceleration due to the uniform electric field acting in the opposite direction of the electron's motion.
To know more about electron, visit;
https://brainly.com/question/860094
#SPJ11
As has focal length 44 cm Part A Find the height of the image produced when a 22 cas high obard is placed at stance +10 cm Express your answer in centimeters
The height of the image is 58.74 cm.
Given data:
Focal length = 44 cm
Height of object = 22 cm
Object distance (u) = -10 cm
Image distance (v) =?
Formula: Using the lens formula `1/f = 1/v - 1/u`,
Find the image distance (v).
Using the magnification formula m = -v/u`,
Find the magnification (m).
Using the magnification formula m = h₂/h₁`,
Find the height of the image (h₂).
As per the formula, `
1/f = 1/v - 1/u`
1/44 = 1/v - 1/(-10)
1/v =1/44 + 1/10
v = 26.7 cm.
The image distance (v) is 26.7 cm.
As per the formula, `m = -v/u`
m = -26.7/-10
m = 2.67.
The magnification is 2.67.
As per the formula, `m = h₂/h₁`
2.67 = h₂/22
h₂ = 58.74 cm.
Therefore The height of the image is 58.74 cm.
Learn more about height and Focal length https://brainly.com/question/28039799
#SPJ11
What is the pressure drop (in N/2) due to the Bernoulli effect as water goes into a 3.5 cm diameter
nozzle from a 8.9 cm diameter fire hose while carrying a flow of 35 L/s?
The pressure drop due to the Bernoulli effect as water goes into the nozzle is approximately 569969.28 N/m^2 or 569969.28 Pa.
To find the pressure drop (ΔP) due to the Bernoulli effect as water goes into the nozzle,
We need to calculate the velocities (v1 and v2) and substitute them into the pressure drop formula.
Given:
Diameter of the fire hose (D1) = 8.9 cm = 0.089 m
Diameter of the nozzle (D2) = 3.5 cm = 0.035 m
Flow rate (Q) = 35 L/s = 0.035 m^3/s
Density of water (ρ) = 1000 kg/m^3
Calculating the cross-sectional areas:
A1 = (π/4) * D1^2
A2 = (π/4) * D2^2
Calculating the velocities:
v1 = Q / A1
v2 = Q / A2
Substituting the values into the equations:
A1 = (π/4) * (0.089 m)^2 ≈ 0.00622 m^2
A2 = (π/4) * (0.035 m)^2 ≈ 0.000962 m^2
v1 = 0.035 m^3/s / 0.00622 m^2 ≈ 5.632 m/s
v2 = 0.035 m^3/s / 0.000962 m^2 ≈ 36.35 m/s
Using the pressure drop formula:
ΔP = (1/2) * ρ * (v2^2 - v1^2)
ΔP = (1/2) * 1000 kg/m^3 * ((36.35 m/s)^2 - (5.632 m/s)^2)
ΔP ≈ 569969.28 N/m^2 ≈ 569969.28 Pa
Therefore, the pressure drop due to the Bernoulli effect as water goes into the nozzle is approximately 569969.28 N/m^2 or 569969.28 Pa.
Learn more about Bernoulli’s principle from the given link :
https://brainly.com/question/13344039
#SPJ11
The first order, irreversible reaction A → B takes place in a catalyst at 450 K and total pressure of 2 atm. Partial pressure of A at 2 mm away from the catalyst surface is 0.7 atm. The reaction occurs in the surface of catalyst and the product B diffuses back. Diffusivity coefficient at given condition is 7 x 10 m/s. Calculate the flux and Caz If k, = 0.00216 m/s.
The flux of the reaction is 0.0144 mol/(m²·s) and the concentration of A at the catalyst surface (Caz) is 0.7 atm.
The flux of a reaction is determined by the rate at which reactants are consumed or products are formed per unit area per unit time. In this case, the flux is given by the equation:
Flux = k * Caz
Where k is the rate constant of the reaction and Caz is the concentration of A at the catalyst surface. Given that k = 0.00216 m/s, we can calculate the flux using the provided value of Caz.
Flux = (0.00216 m/s) * (0.7 atm)
= 0.001512 mol/(m²·s)
= 0.0144 mol/(m²·s) (rounded to four significant figures)
Therefore, the flux of the reaction is 0.0144 mol/(m²·s).
Learn more about flux
brainly.com/question/15655691
#SPJ11
Pulsed lasers used for science and medicine produce very brief bursts of electromagnetic energy. Part A
If the laser light wavelength is 1062 nm (Neodymium-YAG laser), and the pulse lasts for 50 picoseconds, how many wavelengths are found within the laser pulse? Express your answer using two significant figures. N =
wavelengths Submit Request Answer Part B How brief would the pulse need to be to fit only one wavelength? T =
The answer is the number of wavelengths found within the laser pulse is approximately 0.05. We can calculate the number of wavelengths in a laser pulse using the formula: Number of wavelengths = (duration of pulse)/(wavelength)
A) Here, the duration of pulse = 50 picoseconds = 50 x 10^-12 seconds
The wavelength = 1062 nm = 1062 x 10^-9 meters
Number of wavelengths = (50 x 10^-12)/(1062 x 10^-9) = 0.047 or 0.05 (rounded to two significant figures)
Therefore, the number of wavelengths found within the laser pulse is approximately 0.05.
B) To calculate how brief the pulse needs to be to fit only one wavelength, we can rearrange the above formula as:
Duration of pulse = (number of wavelengths) x (wavelength)
Here, we want only one wavelength in the pulse. Therefore,
Number of wavelengths = 1
Wavelength = 1062 nm = 1062 x 10^-9 meters
Duration of pulse = (1) x (1062 x 10^-9) = 1.062 x 10^-9 seconds
Learn more about wavelengths: https://brainly.com/question/10750459
#SPJ11
A certain circuit breaker trips when the rms current becomes 14 A. Randomized Variables 1=14A What is the corresponding peak current in A? 10-
The corresponding peak current in amperes is 19.8 A.
A circuit breaker is a device that automatically breaks an electrical circuit when the current flow exceeds a certain level.
The rms current is the effective value of an AC current that results in the same power as the equivalent DC current, expressed in amperes (A).
The equation to calculate the peak current value in a circuit is given as;
Peak current (I) = RMS current (Irms) x √2
Here, the randomized variable 1 = 14 A.
So, the peak current can be found as follows;
Peak current (I) = Irms × √2I
= 14 A × √2I
≈ 19.8 A
Therefore, the corresponding peak current in amperes is 19.8 A.
To know more about current visit:
https://brainly.com/question/29427458
#SPJ11
The noise level coming from a pig pen with 131 pigs is 60.7 dB. Assuming each of the remaining pigs squeal at their original level after 78 of their compan- ions have been removed, what is the decibel level of the remaining pigs?
The decibel level of the remaining pigs in the pen, after 78 pigs have been removed, can be calculated as approximately 20 * log10(Total noise level of remaining pigs).
To determine the decibel level of the remaining pigs, we need to consider the fact that the decibel scale is logarithmic and additive for sources with the same characteristics.
Given that the noise level coming from a pig pen with 131 pigs is 60.7 dB, we can assume that each pig contributes equally to the overall noise level. Therefore, the noise level from each pig can be calculated as:
Noise level per pig = Total noise level / Number of pigs
= 60.7 dB / 131
Now, we need to consider the scenario where 78 pigs have been removed from the pen. Since each remaining pig squeals at their original level, the total noise level of the remaining pigs can be calculated as:
Total noise level of remaining pigs = Noise level per pig * Number of remaining pigs
= (60.7 dB / 131) * (131 - 78)
Simplifying the expression:
Total noise level of remaining pigs = (60.7 dB / 131) * 53
Finally, we have the total noise level of the remaining pigs. However, since the decibel scale is logarithmic and additive, we cannot simply multiply the noise level by the number of pigs to obtain the decibel level. Instead, we need to use the logarithmic property of the decibel scale.
The decibel level is calculated using the formula:
Decibel level = 10 * log10(power ratio)
Since the power ratio is proportional to the square of the sound pressure, we can express the formula as:
Decibel level = 20 * log10(sound pressure ratio)
Applying this formula to find the decibel level of the remaining pigs:
Decibel level of remaining pigs = 20 * log10(Total noise level of remaining pigs / Reference noise level)
The reference noise level is a standard value typically set at the threshold of human hearing, which is approximately 10^(-12) W/m^2. However, since we are working with decibel levels relative to the initial noise level, we can assume that the reference noise level cancels out in the calculation.
Hence, we can directly calculate the decibel level of the remaining pigs as:
Decibel level of remaining pigs = 20 * log10(Total noise level of remaining pigs)
Substituting the calculated value of the total noise level of the remaining pigs, we can evaluate the expression to find the decibel level.
Learn more about logarithmic from the given link:
https://brainly.com/question/30226560
#SPJ11
Match each description of property of a substance with the most appropriate of the three common states of matter. If the property may apply to more than one state of matter, match it to the choice that lists all states of matter that are appropriate. Some choices may go unused. Hint a ✓ Atoms and molecules in it are significantly attracted to neighboring atoms and molecules. can carry a sound wave takes on the shape of the container retains its own shape and size takes on the size of the container g f a f fis included as "fluids" a. solids b. solids and gases c. liquids d. gases e. solids and liquids f. liquids and gases g. solids, liquids, and gases
Atoms and molecules in it are significantly attracted to neighboring atoms and molecules. - a. solids ,Can carry a sound wave - c. liquids ,Takes on the shape of the container - f. liquids and gases ,Retains its own shape and size - a. solids, Takes on the size of the container - g. solids, liquids, and gases,The property of being a fluid is included as "fluids" - f. liquids and gases
Matching the descriptions with the appropriate states of matter:
Atoms and molecules in it are significantly attracted to neighboring atoms and molecules: a. solids
Can carry a sound wave: c. liquids
Takes on the shape of the container: f. liquids and gases
Retains its own shape and size: a. solids
Takes on the size of the container: g. solids, liquids, and gases
The property of being a fluid is included as "fluids": f. liquids and gases
The descriptions of properties of substances are matched with the most appropriate states of matter as follows:
Solids are characterized by significant attraction between atoms and molecules, retaining their own shape and size.
Liquids can carry a sound wave, take on the shape of the container, and are included in the category of fluids.
Gases take on the size of the container and are also included in the category of fluids.
Solids are characterized by significant attractions between atoms and molecules, and they retain their own shape and size. Liquids can carry sound waves, take on the size of the container, and are included in the category of fluids. Gases take on the shape of the container. Both solids and liquids can take on the size of the container.
To know more about sound wave, visit:
https://brainly.com/question/1173066
#SPJ11
Show work when possible! thank you! :)
1. What equation will you use to calculate the acceleration of gravity in your experiment?
2. A ball is dropped from a height of 3.68 m and takes 0.866173 s to reach the floor. Calculate the
free fall acceleration.
3. Two metal balls are dropped from the same height. One ball is two times larger and heavier
than the other ball. How do you expect the free fall acceleration of the larger ball compares to
the acceleration of the smaller one?
1. To calculate the acceleration of gravity in the experiment, the equation used is:
g = 2h / t²
2. The free fall acceleration can be calculated as 8.76 m/s².
3. The free fall acceleration of the larger ball is expected to be the same as the acceleration of the smaller ball.
1. The equation used to calculate the acceleration of gravity in the experiment is derived from the kinematic equation for motion under constant acceleration: h = 0.5gt², where h is the height, g is the acceleration of gravity, and t is the time taken to fall.
By rearranging the equation, we can solve for g: g = 2h / t².
2. - Height (h) = 3.68 m
- Time taken (t) = 0.866173 s
Substituting these values into the equation: g = 2 * 3.68 / (0.866173)².
Simplifying the expression: g = 8.76 m/s².
Therefore, the free fall acceleration is calculated as 8.76 m/s².
3. The acceleration of an object in free fall is solely determined by the gravitational field strength and is independent of the object's mass. Therefore, the larger ball, being two times larger and heavier than the smaller ball, will experience the same acceleration due to gravity.
This principle is known as the equivalence principle, which states that the inertial mass and gravitational mass of an object are equivalent. Consequently, both balls will have the same free fall acceleration, regardless of their size or weight.
To know more about acceleration refer here:
https://brainly.com/question/30660316#
#SPJ11
Question 17 Which of the four forces act on an aircraft? O a Lift, gravity, thrust and drag O b. Lift, thrust, weight & drag Oc Weight, gravity, thrust and drag Od Lift weight gravity and drag
The four forces act on an aircraft is "Lift, gravity, thrust, and drag"Four forces act on an aircraft (option a).
These forces are:
Thrust Drag Lift: Lift is the force that is created by the wings of the aircraft that helps the airplane move upward into the sky. The speed of the airplane through the air determines how much lift the wings create.
Gravity: Gravity is the force that pulls the airplane towards the center of the earth. It is a constant force that is always acting on the airplane. The weight of the airplane is determined by the force of gravity.
Thrust: Thrust is the force that is created by the engines of the airplane. It helps the airplane move forward through the air. The amount of thrust that is needed is dependent on the weight of the airplane.Drag: Drag is the force that is created by the air resistance to the movement of the airplane through the air. The amount of drag that is created is dependent on the speed of the airplane and the shape of the airplane. The correct option is a.
To know more about forces:
https://brainly.com/question/30507236
#SPJ11
7. Which of the following diagram indicate(s) the correct direction of an electric field, E, magnetic field, B, and the propagation, c, of an electromagnetic wave? C. A. B AE C B. B E AB E
Based on the given options, the diagram that indicates the correct direction of an electric field (E), magnetic field (B), and the propagation (c) of an electromagnetic wave is option B.
In option B, the electric field (E) is represented by the vertical lines, the magnetic field (B) is represented by the horizontal lines, and the propagation of the electromagnetic wave (c) is indicated by the arrow pointing to the right. This configuration is consistent with the right-hand rule for electromagnetic waves, where the electric and magnetic fields are perpendicular to each other and both perpendicular to the direction of wave propagation.
Therefore, option B is the correct diagram that represents the direction of an electric field, magnetic field, and the propagation of an electromagnetic wave.
Learn more about electromagnetic waves https://brainly.com/question/13874687
#SPJ11
Platinum is deposited on n-type silicon substrate forming a Schottky diode. The metal workfunction, m = 5.65 V, the electron affinity, x = 4.01 V, N, = 3 x 1016 cm-3, Nc = 2.86 x 1019 cm-3 and T = 300 K. Calculate, x (a) the barrier height, Bn, (b) the built in potential, Vbi, (c) the depletion width, W.
To calculate the barrier height (Bn), built-in potential (Vbi), and depletion width (W) of the Schottky diode formed by platinum (Pt) on an n-type silicon substrate, we can use the following equations:
(a) Barrier height (Bn):
Bn = φm - χ - Vt * ln(Na / ni)
(b) Built-in potential (Vbi):
Vbi = Bn / q
(c) Depletion width (W):
W = sqrt((2 * εr * ε0 * (Vbi - V) / (q * Na)))
ni = sqrt(Nc * Nv) * exp(-Eg / (2 * k * T))
Nv = Effective density of states in the valence band
Eg = Bandgap energy of silicon
For silicon, Nv = 2.86 x 10^19 cm^-3 (assuming effective density of states is the same as acceptor concentration, Nc) and Eg = 1.12 eV.
Nc = 2.86 x 10^19 cm^-3
Eg = 1.12 eV
k = 8.617333262145 x 10^-5 eV/K
T = 300 K
ni = sqrt(Nc * Nv) * exp(-Eg / (2 * k * T))
= sqrt((2.86 x 10^19 cm^-3) * (2.86 x 10^19 cm^-3)) * exp(-1.12 eV / (2 * 8.617333262145 x 10^-5 eV/K * 300 K))
(a) Barrier height (Bn):
Bn = φm - χ - Vt * ln(Na / ni)
= 5.65 V - 4.01 V - ((k * T) / q) * ln(Na / ni)
(b) Built-in potential (Vbi):
Vbi = Bn / q
(c) Depletion width (W):
W = sqrt((2 * εr * ε0 * (Vbi - V) / (q * Na)))
Learn more about built-in potential here : brainly.com/question/29385861
#SPJ11
Describe that the gravitational potential energy is
measured from a reference
level and can be positive or negative, to denote the orientation
from the
reference level.
Gravitational potential energy is a form of energy associated with an object's position in a gravitational field. It represents the potential of an object to do work due to its position relative to a reference level.
The reference level is an arbitrary point chosen for convenience, typically set at a certain height or location where the gravitational potential energy is defined as zero.
When measuring Gravitational potential energy, the choice of the reference level determines the sign convention. Positive or negative values are used to denote the orientation of the object with respect to the reference level.
If an object is positioned above the reference level, its gravitational potential energy is positive. This means that it has the potential to release energy as it falls towards the reference level, converting gravitational potential energy into other forms such as kinetic energy.
Conversely, if an object is positioned below the reference level, its gravitational potential energy is negative. In this case, work would need to be done on the object to lift it from its position to the reference level, thus increasing its gravitational potential energy.
The specific choice of reference level and sign convention may vary depending on the context and the problem being analyzed. However, it is important to establish a consistent reference level and sign convention to ensure accurate calculations and meaningful comparisons of gravitational potential energy in different situations.
Learn more about kinetic energy from the given link
https://brainly.com/question/8101588
#SPJ11
Gravitational potential energy, represented by the formula PE = m*g*h, depends on an object's mass, gravity, and height from a reference level. Its value can be positive (if the object is above the reference level) or negative (if it's below).
Explanation:Gravitational potential energy is the energy of an object or body due to the height difference from a reference level. This energy is represented by the equation PE = m*g*h, where PE stands for the potential energy, m is mass of the object, g is the gravitational constant, and h is the height from the reference level.
The value of gravitational potential energy can be positive or negative depending on the orientation from the reference level. A positive value typically represents that the object is above the reference level, while a negative value indicates it is below the reference level.
Learn more about Gravitational potential energy here:https://brainly.com/question/23134321
#SPJ2
Consider transmission of light (extinction coefficient = 1.96e-04 /m) through 0.5 km of air containing 0.5 µm fog droplets. The percentage transmission is:
The percentage transmission of light through 0.5 km of air containing 0.5 µm fog droplets is approximately 90.48%.
To calculate the percentage transmission of light through the given medium, we need to consider the extinction coefficient and the distance traveled by the light.
The extinction coefficient represents the rate at which light is absorbed or scattered per unit distance. In this case, the extinction coefficient is 1.96e-04 /m.
The distance traveled by the light through the medium is given as 0.5 km, which is equal to 500 meters.
To calculate the percentage transmission, we need to determine the amount of light that is transmitted through the medium compared to the initial amount of light.
The percentage transmission can be calculated using the formula:
Percentage Transmission = (Transmitted Light Intensity / Incident Light Intensity) * 100
The amount of transmitted light intensity can be calculated using the exponential decay formula:
Transmitted Light Intensity = Incident Light Intensity * e^(-extinction coefficient * distance)
Substituting the given values into the formula:
Transmitted Light Intensity = Incident Light Intensity * e^(-1.96e-04 /m * 500 m)
Now, we need to determine the incident light intensity. Since no specific value is provided, we'll assume it to be 100% or 1.
Transmitted Light Intensity = 1 * e^(-1.96e-04 /m * 500 m)
Calculating this value:
Transmitted Light Intensity ≈ 0.9048
Finally, we can calculate the percentage transmission:
Percentage Transmission = (0.9048 / 1) * 100 ≈ 90.48%
Therefore, the percentage transmission of light through 0.5 km of air containing 0.5 µm fog droplets is approximately 90.48%.
Visit here to learn more about extinction coefficient brainly.com/question/32634704
#SPJ11