The final pressure is 6312.935 Pa.
The final pressure of the gas can be calculated using the Ideal Gas Law, PV = nRT.
In this situation, the volume of the gas is doubled and the temperature is increased from 30 degrees Celsius to 80 degrees Celsius, while the number of moles of gas and the ideal gas constant remains constant.
Therefore, the pressure of the gas will decrease as the volume doubles and the temperature increases. The final pressure can be calculated by multiplying the initial pressure by the ratio of the initial volume to the final volume and the ratio of the final temperature to the initial temperature.
Final pressure = (Initial pressure) x (Initial volume / Final volume) x (Final temperature / Initial temperature)
The initial pressure is 67cm mercury. 1cm mercury = 133.322 Pa so 67cm mercury = 67*133.322 =8933.294 Pa.
The final temperature is 80-degree celsius = 80+273 = 353K
The final pressure =8933.294 x (1/2) x (353/303) = 6312.935 Pa
Learn more about Ideal Gas Law here:
https://brainly.com/question/27870704
#SPJ4
PLEASE HELP SOON!
What kind of reaction occurs in an electrolytic cell? What characterizes its voltage?
I know a redox reaction occurs in electrolytic cells, but am confused about the second part, please help!
In an electrolytic cell, an oxidation-reduction reaction occurs. This type of reaction involves the transfer of electrons from one species to another.
The voltage of an electrolytic cell is typically greater than the voltage of a galvanic cell and is determined by the reactants and the reaction conditions.
In an electrolytic cell, a chemical reaction is driven by an external electrical current. This current causes electrons to flow between two electrodes, typically a cathode and an anode. At the cathode, electrons are gained, leading to a reduction reaction, while at the anode, electrons are lost, leading to an oxidation reaction.
The voltage of an electrolytic cell is typically greater than the voltage of a galvanic cell, and is determined by the reactants and the reaction conditions. The voltage must be high enough to provide the energy needed to drive the reaction, and can be adjusted by changing the current. The reaction rate of an electrolytic cell can also be controlled by varying the current.
Learn more about electrolytic cell:
https://brainly.com/question/21722989
#SPJ4
A student increases the temperature of 300 cm balloon from 30 cm to 60 cm what will the new volume be of the balloon be(remeber to be careful with the units. )
After solving the equation: The new volume of the balloon will be 600 cm3.
What is volume?Volume is a measure of the three-dimensional space occupied by a substance or object. In chemistry, volume is most commonly measured in liters (L). It is used to measure the amount of a substance that is present. For instance, when performing a reaction, the volume of the reactants is measured to determine the molar amounts of the reactants.
This is because the volume of a balloon is directly proportional to its temperature. So when a balloon is heated, the volume increases. In this case, the balloon's temperature was increased by 30 cm, so the volume was increased by 300 cm3 (30 cm x 10 cm3, since the volume of a balloon is proportional to its temperature to the power of 3). Thus, the new volume is 600 cm3 (300 cm3 + 300 cm3).
To learn more about volume
https://brainly.com/question/28717703
#SPJ4
Why did the scientists only add earthworms to half of the pipes?
...
An annelid can regenerate to some extent after being split in half, and in some species, you may even get two worms. However, the common earthworm only regenerates from the tail end; Every time, the head end dies.
Can worms withstand being divided in half?The Washington Post reports that many earthworms can lose several segments from their head end and grow back, and that almost all worms can regrow their tails if they are amputated. However, for some worms, the likelihood of fully regenerating decreases with the number of segments removed.
What substance does the earthworm secrete to stabilize the tunnel walls?Coelomic fluid, which is secreted by many earthworms, makes it easier for them to move through the soil. This fluid forms a cement-like substance that lines the burrows of some burrowing species to prevent the walls from falling down.
To learn more about earthworm here:
https://brainly.com/question/28690031
#SPJ1
Which of the following answer choices would BEST describe Marco Polo's reaction when he saw the Chinese using coal
The majority of Europeans at the time had never heard of coal, which Marco Polo described as "black stones...which burn like logs."
Initially, charcoal was utilized in the production process, which caused extensive deforestation in northern China. However, coal had fully replaced charcoal by the end of the 11th century.
They do indeed have an abundance of firewood. However, due to the massive population and the large number of bathhouses and baths that are continually being heated, it would be impossible to supply enough firewood, as everyone takes a bath at least three times each week, and in the winter, if they can, every day. Since every man of rank and means has a bathroom of his own at home, the abundance and low cost of these stones result in significant wood savings.
To learn about coal click here
https://brainly.com/question/12981477
#SPJ4
what is the mistake in the set up above?
Answer:
Explanation:
d
Convert 4.97 x 10' grams of ammonia (NH3) to moles of ammonia.
Answer: There are [tex]0.292 \times 10^{-4} mol[/tex] are present in [tex]4.97 \times 10^{-4} g[/tex] of ammonia.
Explanation:
Given: Mass of ammonia = [tex]4.97 \times 10^{-4} g[/tex]
As number of moles is the mass of substance divided by its molar mass.
Hence, moles of ammonia (molar mass = 17 g/mol) are calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{4.97 \times 10^{-4} g}{17 g/mol}\\= 0.292 \times 10^{-4} mol[/tex]
Thus, we can conclude that there are [tex]0.292 \times 10^{-4} mol[/tex] are present in [tex]4.97 \times 10^{-4} g[/tex] of ammonia.
11th maths,physics, biology, chemistry, English,
Answer:
???
Explanation:
The fluid-filled interior compartment of the thylakoid network is referred to as the:
A. cytoplasm.
B. intermembrane space.
C. lumen.
D. grana.
E. stroma.
The fluid-filled interior compartment of the thylakoid network is referred to as the: Lumen
The thylakoid lumen is an aqueous phase that is continuously enclosed by the thylakoid membrane. It is essential for photophosphorylation during photosynthetic activity. Protons are hyped across the thylakoids into the lumen during the light-dependent reaction, making it acidic down to pH 4. The lumen in the chloroplast is referred to as the stroma. The stroma is the whitish fluid that surrounds the grana (thylakoids stacks) within the chloroplast. A lumen is the chloroplast membrane that surrounds space. Light energy is captured by photosystems found in thylakoid membranes. The thylakoid membrane contains enzymes required for photosynthesis's light-dependent reactions. Hydrogen ions are pumped into the thylakoid space, or lumen, during these reactions.The thylakoid space has an acidic pH due to the high concentration of hydrogen ions.
Learn more about chloroplast here:
https://brainly.com/question/11136550
#SPJ4
A container is filled with a gas. The container has a wall controlled by a moveable piston. The
temperature within the container is held constant. The gas in the container has a pressure of 1.85
atmospheres and fills a volume of 4.64 liters. What will be the new volume of the gas if the pressure is
changed to 2.34 atmospheres?
Answer:
The new volume will be 3.67 L.
Explanation:
As the volume increases, the gas particles (atoms or molecules) take longer to reach the walls of the container and therefore collide with them fewer times per unit of time. This means that the pressure will be lower because it represents the frequency of collisions of the gas against the walls. In this way pressure and volume are related, determining Boyle's law which says:
"The volume occupied by a certain gaseous mass at constant temperature is inversely proportional to pressure"
Boyle's law is expressed mathematically as:
P*V=k
Now it is possible to assume that you have a certain volume of gas V1 that is at a pressure P1 at the beginning of the experiment. If you vary the volume of gas to a new value V2, then the pressure will change to P2, and it will be fulfilled:
P1 * V1 = P2 * V2
In this case:
P1= 1.85 atmV1= 4.64 LP2= 2.34 atmV2= ?Replacing:
1.85 atm* 4.64 L= 2.34 atm* V2
Solving:
[tex]V2= \frac{1.85 atm* 4.64 L}{2.34 atm}[/tex]
V2= 3.67 L
The new volume will be 3.67 L.
Consider the following reaction: CS2(g) + 4H2(g) CH4(g) + 2H2S(g). The equilibrium constant K is about 0.31 at 900.°C. What is Kp at this temperature? A) 2.9 103 B) 3.2 10–3 C) 3.3 10–5 D) 3.0 101 E) 1.1 10–3
The Kp of the reaction as it has been shown is 2.9 × 10^3 Option A
What is the Kp?We know that the equilibrium constant is the constant that has to do with the ease with which the reactants that are in the system can be converted into the products. In this case we have been given the reaction equation as it has been shown in the question.
Let us all now bear in mind that the reaction ghat we have here is a gas phase reaction and since the reaction is a gas phase reaction the equilibrium constanta that has been given as K can also be written in terms of the partial pressures of the gasses that are present in the system and this ius the bed rock of the answer that we woulod give above. The Kp can now be written as a scientific notation as shown above.
Then;
kp = Kc/(RT)^∆n
Kp = equilibrium constant using pressure
Kc = equilibrium constant using concentration
R = gas constant
T = temperature
n= difference in number of moles
Kp = 0.31/(0.082 × 1173)^-2
Kp = 2.9 × 10^3
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ1
Suppose you run this reaction in a solvent that dissolves elemental mercury and elemental oxygen. What is the equilibrium-constant expression in terms of molarities for the reaction, using (solv) to indicate solvation.
At 55 °C, the equilibrium constant for this reaction is 6.68. A pharmaceutical chemist prepares 15.0 L of an initial 0.275 M acetic acid and 3.85 M ethanol solution.
Create an equation that can be solved for x by plugging the equilibrium concentrations (expressed in terms of x) into the formula for the equilibrium constant. (d) The equation from subpart (c) is cubic (it bears the formula ax3 + bx2 + cx + d = 0). In general, it is impossible to solve cubic equations in closed form. Indicate the direction (toward product or toward reactants) in which the mixture must change if it is not at equilibrium. The concentrations of SO 2 Cl 2 and SO 2 are 0.108 M and 0.052 M, respectively, in a mixture of the three gases that has reached equilibrium.
To learn more about equilibrium constant please click on below link
https://brainly.com/question/10038290
#SPJ4
Transpiration is when a plant releases water vapor through its stomata, which are pours in its leaves and stems. What other process in the water cycle is this most similar to? explain your reasoning.
In addition to respiration, a process known as guttation involves the loss of liquid water from a plant's healthy leaf or stem, mostly through water stomata.
What is the transpiration process?The physiological loss of water . water of water vapor, mostly from the stomata of leaves, but also by evaporation first from surfaces of leaf tissue, flowers, and stems, is known as transpiration.
Why is transpiration necessary to plants?Additionally, by providing evaporative cooling, vegetation transpiration makes a major contribution to the energy balance of the leaf. Additionally, transpiration speeds up the movement of nutrients and water from roots to the shoots. Transpiration occurs when water vapor leaves a plant through the stomata.
To know more about Transpiration visit:
https://brainly.com/question/13891305
#SPJ1
The basic unit of electric current is the:
ohm.
ampere.
* conductivity.
volt.
Answer is ampere
Answer:
It's B
Explanation:
Edge2021
Pyroclastic material is classified primarily by the size of the particles. What is the basis for classifying lava?
please help !
Answer:
Crustal appearance provides the basis for classifying lava flows on land into three major categories, pahoehoe, aa and blocky.
Explanation:
Crustal appearance provides the basis for classifying lava flows on land into three major categories, pahoehoe, aa and blocky.
Is lava a pyroclastic material?Lava creeps slowly and burns everything in its path but pyroclastic flows destroys nearly everything by land and air, its speed is usually greater than 80 km per hour, but it can reach 400 km per hour.
Pyroclastic flows contain a high-density mix of hot lava blocks, pumice, ash and volcanic gas. They move at very high speed down volcanic slopes, typically following valleys.
Learn more about pyroclastic material here:
https://brainly.com/question/16582896
#SPJ2
An ice cube with a volume of 45. 0ml and a density of 0. 9000g/cm3 floats in a liquid with a density of 1. 36g/ml. What volume of the cube is submerged in the liquid
The volume of the cube that is submerged in the liquid would be 36.0 ml.
What is submerged?Submerged refers to something that is completely covered or surrounded by a liquid, usually water. Submerged objects are often completely or partially underwater, and can refer to anything from a submerged shipwreck to a submerged rock formation. Submerged objects can also refer to objects that are partially or totally surrounded by the water or liquid, such as a submerged tree or submerged vegetation. Submerging can also refer to objects that are pushed underwater or forced down due to pressure, such as a submarine. Submerging can also refer to a process in which an object is submerged and then brought back up, such as in underwater welding or archaeological excavations.
To learn more about submerged
https://brainly.com/question/15109453
#SPJ4
A gas has a pressure of 1.74 atm when the temperature is 237K. The gas is then
heated until the temperature measures 312K. What will be the new pressure? *
2.29 atm
1.32 atm
O 128662.56 atm
Answer:
[tex]\boxed {\boxed {\sf 1.99 \ atm}}[/tex]
Explanation:
We are finding the pressure with a change in temperature, so we should use Gay Lussac's Law. This states that the pressure is directly proportional to the temperature. The formula is:
[tex]\frac{P_1}{T_1}=\frac{P_2}{T_2}[/tex]
The original pressure is 1.74 atmospheres and a temperature of 273 Kelvins. When the gas is heated the new temperature is 312 Kelvins, but the new pressure is unknown. Substitute all the known values into the formula.
[tex]\frac {1.74 \ atm}{273 \ K}=\frac {P_2}{312 \ K}[/tex]
Since we are solving for the new pressure, we need to isolate the variable P₂. It is being divided by 312 Kelvin and the inverse of division is multiplication. Multiply both sides by 312 K.
[tex]312 \ K *\frac {1.74 \ atm}{273 \ K}=\frac {P_2}{312 \ K}* 312 \ K[/tex]
[tex]312 \ K *\frac {1.74 \ atm}{273 \ K}= P_2[/tex]
The units of Kelvin (K) will cancel.
[tex]312 \ *\frac {1.74 \ atm}{273 }= P_2[/tex]
[tex]1.98857143 \ atm= P_2[/tex]
The original measurements have 3 significant figures, so our answer must have the same. For the number we found, that is the hundredth place.
The 8 in the thousandth place tells us to round 8 in the hundredth place up to a 9.
[tex]1.99 \ atm \approx P_2[/tex]
The new pressure is approximately 1.99 atmospheres.
The molar mass of bismuth (\ce{Bi}BiB, i) is \pu{208. 98 g/mol}208. 98 g/mol208, point, 98, space, g, slash, m, o, l. Calculate the mass in grams of a sample of \ce{Bi}BiB, i containing \pu{7. 35x10^23}7. 35×10 23 7, point, 35, times, 10, start superscript, 23, end superscript atoms
The mass in grams of a sample of Bi with 7.35 1023 atoms should be 255 grams.
What does molar mass in chemistry refer to?A substance's mass is measured in grams per mole, or molar mass. The molar mass of a substance can be determined, as demonstrated in this video, by adding the molar masses of the substance's constituent atoms. The substance's molar mass can then be used to determine the number of moles in the substance and converted to mass.
The molar mass of Bi is 208.98 g/mol.
1 mole Bi = 208.98 g/mol = 6.023×10²³ no of atoms
So, the mass in grams should be
mass = ( 208.98 g/mol ×7.35 × 10²³) ÷ (6.023×10²³)
mass = 255 grams.
To know more about molar mass visit:
https://brainly.com/question/18481666
#SPJ4
A student generates a plot of ln(k) vs ln[OH-].
The result yields a straight line with the equation: y = 1.18x + -3.80
According to this data, what is the order of the reaction in OH-, to the nearest whole number?
The order of the reaction is First Order with respect to the hydroxide ion (OH-) can be determined by examining the slope of the line generated in the plot of ln(k) vs ln[OH-]. In this case,
the slope of the line is 1.18, which indicates that the reaction is first-order with respect to OH-. The order of a chemical reaction refers to the power to which the concentration order of a reactant is raised in the rate equation. The rate of a reaction is typically described by the rate equation, which is a mathematical expression that relates the rate of the reaction to the concentrations of the reactants. The order of a reaction is determined experimentally by measuring the rate of the reaction at different concentrations of the reactants and fitting the data to a rate equation.
Learn more about the order of the reaction here:
https://brainly.com/question/8139015
#SPJ4
How many of the carbons in the following compound are chiral center(s)? A) 0 B) 1 C) 2 D) 3 E) 4 or more
Answer:
3 (e
Explanation:
The information below pives PH values of solutions , w,XYZ
Solution
Pl values
2
6.5
W
Y
z
14
4.5
(a) Which solution is likely to be:
(i) Calcium hydroxide?
(1) Rain water?
Answer:
The calcium hydroxide solution will likely have the pH of 14 (very basic) while rain water will likely have a pH if 6.5 (slightly acidic).
Why don't we draw a double bond between the Be and Cl atoms in the Lewis structure for BeCl2? a. That would give each Cl a positive formal charge and the Be a negative formal charge b. There aren't enough electrons in the molecule to do so. c. That would result in an expanded octet for beryllium.
d. That would result in an expanded octet for chlorine.
Lone electron pairs are absent from the Be atom. A negative formal charge would be placed on the Be atom as a result of the double bonds existing between it and the Cl atom.
Why is it necessary to go over the formal charges that each atom has in the Lewis diagram?When compared to an isolated neutral atom, the number of electrons that are attached to an atom in a molecule determines its formal charge.
Why is the octet rule broken by becl2?The octet rule is broken by B e C l 2, as the boron should be in a valence state that enables it to attach to three chlorines. However, in this molecule, the boron is joined by six electrons.
To know more about Lewis structure visit:-
https://brainly.com/question/20300458
#SPJ1
5. Calculate the heat energy required, in joules, to melt 5.00 x 10² grams of ice at 0.0°C.
Here is the Conclusion 240. Heat energy affects a substance’s intermolecular forces as the substance changes between states.
How to get the State changes?Heat energy increases during the following state changes
Solid - (melting)
Liquid -gas (evaporation)
Solid- gas (sublimation)
Heat energy decreases during the following state changes
Gas- liquid (condensation)
Liquid → solid (freezing)
Gas –solid (deposition)
An intermolecular force (IMF) (or secondary force) is the force that mediates the interaction of molecules, including electromagnetic forces of attraction or repulsion that act between atoms and other types of nearby particles, such as atoms or ions.
To learn more about intermolecular to refer:
https://brainly.com/question/9328418
#SPJ1
The heat energy required, in joules, to melt 5.00 x 10² grams of ice at 0.0°C. 2016.6 J.
How does heat energy become created?When the temperature rises, molecules and atoms move faster and collide, creating heat generated (also known as heat energy). Thermal energy is the heat that results from heated substance's temperatures.
Calculation :The following phrase may be used to determine the change in heat energy in a process like melting.
S = H * m / T
where:
S = entropy [kJ]
H = fusion heat = 3.36*10¹ [J/kg]
m = mass = 0.02 [kg]
T = temperature in kelvin = 273 [K]
S = 0.02 * 5.00 * 10² / (273 + 0)
S = 2016.6 J
To know more about Heat energy visit:
https://brainly.com/question/25384702
#SPJ1
The complete question is -
Calculate the heat energy of 5.00 * 10² g of ice when it melts at 0.0°C. The heat of fusion of ice is 3.36 x 10'J/kg.
A solution contains 90 mL of methanol, 18 mL of propanol, and 2 mL of diethyl ether. Which is the solvent in this solution?
methanol
propanol
diethyl ether
water
Answer:
Methanol is the solvent in this solution.
Explanation:
Mixtures are the union of two or more pure substances, which can be classified as heterogeneous when the components of the mixture can be observed and homogeneous when the components cannot be observed (they are not distinguished).
When the mixtures are homogeneous, it can be said that they are chemical solutions.
In a solution you can distinguish solutes and solvent. A solute is a substance that dissolves in another with which it forms a solution. The solute is normally a solid, but it can also be a liquid or a gas. It is found in a lower proportion than the solvent in a solution.
It is called a "solvent", the element that dissolves in the other. That is, the solvent is the substance that dissolves a solute, forming a homogeneous solution. This is normally a liquid, but it can also be a solid or a gas. It is found in greater proportion than the solute in a solution.
In this case, since methanol is the component that has the greatest volume, it means that it is found in a greater proportion. So methanol is the solvent in this solution.
Answer:
Its (A) methanol
Explanation:
got 100% on test on edg2021
A beaker was filled with a mixture of 40 liters of water and a liquid chemical in the ratio of 3 : 5, respectively. If 2 percent of the initial quantity of water and 5 percent of the initial quantity of liquid chemical evaporated each day during a 10-day period, what percent of the original amount of mixture evaporated during this period
30% of the original amount of mixture evaporated during the 10-day period.
In order to determine the percentage of the original amount of mixture that evaporated during the 10-day period, we need to first determine how much water and how much liquid chemical were present in the beaker initially.
Given that the ratio of water to liquid chemical is 3:5, we can assume that the total number of parts is 8 (3+5).
So, the original amount of water is 3 parts / 8 parts = 0.375
And the original amount of liquid chemical is 5 parts / 8 parts = 0.625
We can then use this information to determine how much of each substance evaporated each day:
2% of 40 L of water = 0.02 x 40 L = 0.8 L
5% of 40 L of liquid chemical = 0.05 x 40 L = 2 L
We can then add up the total amount of each substance that evaporated over the 10 days to find the total amount that evaporated from the beaker:
0.8 L of water evaporated/day x 10 days = 8 L
2 L of liquid chemical evaporated/day x 10 days = 20 L
Finally, we can add up the total amount of each substance that evaporated and divide by the total amount of the original mixture to find the percentage of the original amount that evaporated:
(8 L + 20 L) / (40 L + 40 L) = 0.3 or 30%
So 30% of the original amount of mixture evaporated during the 10-day period.
Learn similar problems here: https://brainly.com/question/14919501
#SPJ4
Nitric acid has the formula HNO3. If there are 3. 55x10^23 atoms of O in the sample, how many moles of nitric acid are there?
Nitric acid has the formula HNO₃. If there are 3. 55x10²³ atoms of O in the sample, the number of moles of nitric acid is 0.589moles.
Define mole.How many moles of a substance are present in a reaction is determined by comparing its mass to the mass of one mole. One mole, or Avogadro's number, is equal to the sample mass divided by the molar mass, or 6.023×10²³ moles. You can calculate the total number of atoms or molecules in a sample by dividing the number of moles by the Avogadro constant. The equation is: Number of Molecules=Atoms or Molecules /6.022×10²³.
1 mole oxygen atom contains 6.02×10²³ atoms
how many moles of oxygen contains 3.55x 10²³atoms
Moles of nitric acid = 3.55x 10²³atoms/6.02 ×10²³atoms
Moles of nitric acid = 0.589moles.
To know more about moles visit:
https://brainly.com/question/15894854
#SPJ4
The photo shows a plant that needs rich soil and lots of
sunlight to grow.
Which type of ecosystem is most likely to have a large number of these
plants?
O A. Grassland
B. Taiga
C. Deciduous forest
D. Desert
Answer:
A grassland
Explanation:
Based on the information provided, the ecosystem that is most likely to have a large number of plants that need rich soil and lots of sunlight to grow is a grassland, which is in option A.
What are the types of plants?The plant in the photo requires rich soil and lots of sunlight to grow. Therefore, the ecosystem that is most likely to have a large number of these plants is the one that meets these requirements. A grassland is an ecosystem that receives a lot of sunlight and has nutrient-rich soil, which makes it a potential habitat for such plants. A taiga, on the other hand, is characterized by cold temperatures and acidic soil, which may not support the growth of plants that need rich soil and sunlight.
Hence, based on the information provided, the ecosystem that is most likely to have a large number of plants that need rich soil and lots of sunlight to grow is a grassland, which is in option A.
Learn more about the plants here.
https://brainly.com/question/28102788
#SPJ2
Use the following information to answer the next question
The oil that Syncrude mines from the Athabasca Tar Sands contains large amounts
of undesirable sulfur. To remove most of the sulfur, Syncrude uses a chemical
process known as the Claus process, which results in a low-sulfur "sweet crude oil.
Two steps involved in Claus process are shown below.
Step! H2S(g) + 02(9) - S02(g) + H2O(g) AH = - 518 kJ
Step || SO2(g) + 2 H2S(g) - 3 S(I) + 2 H2O(g) AH = -93 kJ
Syncrude solidifies and stores approximately 1.36 Gg of sulfur per day.
and the enthalpy for the
11. The net equation for the Claus process is
net reaction is -
kJ.
The statement above is best completed by the answers in row:
Row
i
ii
2 H2S(g) + O2(g) - 2 S(0) + 2 H2O(g)
611 kJ
3 H2S(g) + O2(9) – 3 S(0) + 3 H2O(9)
611 kJ
2 H2S(9) + O2(g) - 2 S(I) + 2 H2O(9)
425 kJ
3 H2S(g) + 302(9) - 3 S() + 3 H20(9)
425 kJ
Answer:
Tho oil that Syncrude mines from the Athabasca Tar Sands contains large amounts of undesirable sulfur. To remove most of the sulfur, Syncrude uses a chemcial process known as the Claus process, which results in a low-sulfur “sweet” crude oil.
Explanation:i found this online hope it helps
PLEASE HELP FASTTT! pls put real answer :)
Automotive airbags inflate when sodium azide, NaN3, rapidly decomposes to its component elements via this reaction.
2NaN3 → 2Na + 3N2
***How many grams of sodium azide are required to form 5. 00 g of nitrogen gas?***
The molar mass of sodium azide is 64. 99 g/mol
The molar mass of nitrogen gas is 28. 00 g/mol
Show all steps in the solution of this question, including proper units, for full credit
3.88 grams of sodium azide are required to form 5.00 g of nitrogen gas.
In order to determine how many grams of sodium azide are required to form 5.00 g of nitrogen gas, we can use the balanced equation for the reaction:
2NaN3 (s) → 2Na (s) + 3N2 (g)
We can start by converting the given amount of nitrogen gas to moles:
5.00 g N2 x (1 mol N2 / 28.00 g N2) = 0.1786 mol N2
We know that the reaction produces 3 moles of N2 for every 2 moles of NaN3 that are used, so we can use the following ratio to find the number of moles of NaN3 required:
0.1786 mol N2 / 3 mol N2 = 0.0596 mol NaN3
Finally, we can convert moles of NaN3 back to grams using the molar mass of NaN3:
0.0596 mol NaN3 x (64.99 g NaN3 / 1 mol NaN3) = 3.88 g NaN3
So, 3.88 grams of sodium azide are required to form 5.00 g of nitrogen gas.
Learn more about Balanced Equations here: https://brainly.com/question/12192253
#SPJ4
Benzene is a liquid with molecular formula C6H6
Ethene is a gas with molecular formula C2H4
Which statement is correct?
A 1 mole of benzene and 1 mole of ethene contain the same number of atoms.
B 1 mole of benzene and 1 mole of ethene both have a volume of 24 dm³ at room temperature and pressure.
C Both benzene and ethene have the same empirical formula.
D The number of carbon atoms in 0.5 moles of ethene is equal to the Avogadro constant.
And why is it that way?
Answer:
Benzene is a hydrocarbon with molecular formula of C6 H12 including 3πbond which are rotating
benzene is also a aromatic but ethene is not a aromatic
Explanation:
Answer: No, one mole of benzene (C6H6) and one mole of ethene (C2H4) will have the same number of molecules (6.02x10^23 benzene molecules and 6.02x10^23 molecules of ethene). However, one molecule of benzene consists of 12 atoms, while one molecule of ethene consists of 6 atoms.
What is Ghez’s favorite star? Do you have a favorite star? Why or why not?
Andrea Ghez's favorite star is known as SO-2 and it is her favorite star because this star goes around the universe in a short period. I do not have a favorite star because I do not know a lot about stars.
Who is Andrea Ghez?Andrea Ghez is female astrophysicst who was born in the United States known for being one of the few women in the world who have gotten the Nobel Prize in Physics. During her life, Andrea has studied the center of the universe, black holes and the stars. Moreover, she was known for giving a TED talk in whiich she explained about stars and black holes.
What is Andrea's favorite start?In the TED talk given by Andrea Ghez she mentions her favorite star is the SO-2 as "it goes around in only 15 years".
What is my favorite star?I do not have a favorite star because I do not know a lot about stars, although I believe studying them is very interesting.
Note: This question is incomplete; here is the missin information:
TED Talk- Andrea Ghez
"Now, most astronomers have a favorite star, and mine today is a star that's labeled up there, SO-2. Absolutely my favorite star in the world. And that's because it goes around in only 15 years. And to give you a sense of how short that is, the sun takes 200 million years to go around the center of the galaxy"
Learn more about stars in: https://brainly.com/question/7379319
#SPJ1