a) When discussing energy sources, the terms renewable,
non-renewable, and sustainable have the following meanings:
Renewable Energy Sources: These are energy sources that are naturally replenished and have an essentially unlimited supply. They are derived from sources that are constantly renewed or regenerated within a relatively short period. Examples of renewable energy sources include:
Solar energy: Generated from sunlight using photovoltaic cells or solar thermal systems.
Wind energy: Generated from the kinetic energy of wind using wind turbines.
Hydroelectric power: Generated from the gravitational force of flowing or falling water by utilizing turbines in dams or rivers.
Non-Renewable Energy Sources: These are energy sources that exist in finite quantities and cannot be replenished within a human lifespan. They are formed over geological time scales and are exhaustible. Examples of non-renewable energy sources include:
Fossil fuels: Such as coal, oil, and natural gas, formed from organic matter buried and compressed over millions of years.
Nuclear energy: Derived from the process of nuclear fission, involving the splitting of atomic nuclei.
Sustainable Energy Sources: These are energy sources that are not only renewable but also environmentally friendly and socially and economically viable in the long term. Sustainable energy sources prioritize the well-being of current and future generations by minimizing negative impacts on the environment and promoting social equity. They often involve efficient use of resources and the development of technologies that reduce environmental harm.
An example of a renewable energy source that is not sustainable is biofuel produced from unsustainable agricultural practices. If biofuel production involves clearing vast areas of forests or using large amounts of water, it can lead to deforestation, habitat destruction, water scarcity, or increased greenhouse gas emissions. While the source itself (e.g., crop residue) may be renewable, the overall production process may be unsustainable due to its negative environmental and social consequences.
(b) To calculate the power produced by a wind turbine, we can use the following formula:
Power = 0.5 * (air density) * (blade area) * (wind speed cubed) * (power coefficient)
Given:
Power coefficient (Cp) = 0.4
Blade radius (r) = 50 m
Wind speed (v) = 12 m/s
First, we need to calculate the blade area (A):
Blade area (A) = π * (r^2)
A = π * (50^2) ≈ 7854 m²
Now, we can calculate the power (P):
Power (P) = 0.5 * (air density) * A * (v^3) * Cp
Let's assume the air density is 1.225 kg/m³:
P = 0.5 * 1.225 * 7854 * (12^3) * 0.4
P ≈ 2,657,090 watts or 2.66 MW
Therefore, the wind turbine can produce approximately 2.66 MW of power.
(c) To determine the number of wind turbines needed to supply 100% of the household energy needs of a UK city with 750,000 homes, we need to make some assumptions regarding energy consumption and capacity factors.
Assuming an average household energy consumption of 4,000 kWh per year and a capacity factor of 30% (considering the intermittent nature of wind), we can calculate the total energy demand of the city:
Total energy demand = Number of homes * Energy consumption per home
Total energy demand = 750,000 * 4,000 kWh/year
Total energy demand = 3,000,000,000 kWh/year
Now, let's calculate the total wind power capacity required:
learn more about Energy here:
brainly.com/question/1932868
#SPJ11
Consider an RC circuit with R = 360 kM C = 1.20 F The rms applied voltage is 120 V at 60.0 Hz
w
What is the rms current in the circuit?
Express your answer to three significant figures and include the appropriate units.
The rms current in the RC circuit is approximately 0.333 A (amperes).
To find the rms current in the RC circuit, we can use the relationship between voltage, current, resistance, and capacitance in an RC circuit.
The rms current (Irms) can be calculated using the formula:
Irms = Vrms / Z
where Vrms is the rms voltage, and Z is the impedance of the circuit.
The impedance (Z) of an RC circuit is given by:
Z = √(R² + (1 / (ωC))²)
where R is the resistance, C is the capacitance, and ω is the angular frequency.
Given:
R = 360 kΩ (360,000 Ω)
C = 1.20 F
Vrms = 120 V
f (frequency) = 60.0 Hz
First, we need to calculate ω using the formula:
ω = 2πf
ω = 2π * 60.0 Hz
Now, let's calculate ωC:
ωC = (2π * 60.0 Hz) * (1.20 F)
Next, we can calculate Z:
Z = √((360,000 Ω)² + (1 / (ωC))²)
Finally, we can calculate Irms:
Irms = (120 V) / Z
Calculating all the values:
ω = 2π * 60.0 Hz ≈ 377 rad/s
ωC = (2π * 60.0 Hz) * (1.20 F) ≈ 452.389
Z = √((360,000 Ω)² + (1 / (ωC))²) ≈ 360,000 Ω
Irms = (120 V) / Z ≈ 0.333 A
Therefore, the rms current in the RC circuit is approximately 0.333 A (amperes).
Visit here to learn more about RC circuit brainly.com/question/2741777
#SPJ11
What is the momentum of these photons? (a) 2.24 x 10-28 kg-m/s (b) 3.94 x 10-28 kg-m/s (c) 5.54 x 10-28 kg-m/s (d) 8.14 x 10-28 kg-m/s (e) 9.94 x 10-28 kg-m/s
The momentum of the photons are:
(a) 8.85 x 10^-6 kg·m/s
(b) 4.49 x 10^-6 kg·m/s
(c) 3.33 x 10^-6 kg·m/s
(d) 2.27 x 10^-6 kg·m/s
(e) 1.81 x 10^-6 kg·m/s
The momentum of a photon can be calculated using the equation:
p = E/c
where p is the momentum, E is the energy of the photon, and c is the speed of light.
Since the energy of a photon can be given by the equation:
E = hf
where h is Planck's constant (h ≈ 6.626 x 10^-34 J·s) and f is the frequency of the photon, we can rewrite the momentum equation as:
p = (hf)/c
where f is related to the wavelength (λ) of the photon by the equation:
c = λf
Rearranging this equation, we get:
f = c/λ
Substituting this expression for f in the momentum equation, we have:
p = (hc)/λ
Now we can calculate the momentum for each option given:
(a) p = (6.626 x 10^-34 J·s * 3.00 x 10^8 m/s) / (2.24 x 10^-28 kg) = 8.85 x 10^-6 kg·m/s
(b) p = (6.626 x 10^-34 J·s * 3.00 x 10^8 m/s) / (3.94 x 10^-28 kg) = 4.49 x 10^-6 kg·m/s
(c) p = (6.626 x 10^-34 J·s * 3.00 x 10^8 m/s) / (5.54 x 10^-28 kg) = 3.33 x 10^-6 kg·m/s
(d) p = (6.626 x 10^-34 J·s * 3.00 x 10^8 m/s) / (8.14 x 10^-28 kg) = 2.27 x 10^-6 kg·m/s
(e) p = (6.626 x 10^-34 J·s * 3.00 x 10^8 m/s) / (9.94 x 10^-28 kg) = 1.81 x 10^-6 kg·m/s
Learn more about momentum of photon here: brainly.com/question/8460730
#SPJ11
Part A A stone is thrown vertically upward with a speed of 15.6 m/s from the edge of a cliff 75.0 m high (Figure 1). How much later does it reach the bottom of the cliff? Express your answer to three significant figures and include the appropriate units. + OI? f Value Units Submit Request Answer - Part B What is its speed just before hitting? Express your answer to three significant figures and include the appropriate units. Value Units Submit Request Answer - Part What total distance did it travel? Express your answer to three significant figures and include the appropriate units. + 2 123 Figure 1 of 1 Value Units Submit Request Answer Provide Feedback
The stone reaches the bottom of the cliff approximately 4.20 seconds later. The speed just before hitting the bottom is approximately 40.6 m/s.
Part A: To find how much later the stone reaches the bottom of the cliff, we can use the kinematic equation for vertical motion. The equation is:
h = ut + (1/2)gt^2
Where:
h = height of the cliff (75.0 m, negative since it's downward)
u = initial velocity (15.6 m/s)
g = acceleration due to gravity (-9.8 m/s^2, negative since it's downward)
t = time
Plugging in the values, we get:
-75.0 = (15.6)t + (1/2)(-9.8)t^2
Solving this quadratic equation, we find two values for t: one for the stone going up and one for it coming down. We're interested in the time it takes for it to reach the bottom, so we take the positive value of t. Rounded to three significant figures, the time it takes for the stone to reach the bottom of the cliff is approximately 4.20 seconds.
Part B: The speed just before hitting the bottom can be found using the equation for final velocity in vertical motion:
v = u + gt
Where:
v = final velocity (what we want to find)
u = initial velocity (15.6 m/s)
g = acceleration due to gravity (-9.8 m/s^2, negative since it's downward)
t = time (4.20 s)
Plugging in the values, we get:
v = 15.6 + (-9.8)(4.20)
Calculating, we find that the speed just before hitting is approximately -40.6 m/s. Since speed is a scalar quantity, we take the magnitude of the value, giving us a speed of approximately 40.6 m/s.
Part C: To find the total distance traveled by the stone, we need to calculate the distance covered during the upward motion and the downward motion separately, and then add them together.
Distance covered during upward motion:
Using the equation for distance covered in vertical motion:
s = ut + (1/2)gt^2
Where:
s = distance covered during upward motion (what we want to find)
u = initial velocity (15.6 m/s)
g = acceleration due to gravity (-9.8 m/s^2, negative since it's downward)
t = time (4.20 s)
Plugging in the values, we get:
s = (15.6)(4.20) + (1/2)(-9.8)(4.20)^2
Calculating, we find that the distance covered during the upward motion is approximately 33.1 m.
Distance covered during downward motion:
Since the stone comes back down to the bottom of the cliff, the distance covered during the downward motion is equal to the height of the cliff, which is 75.0 m.
Total distance traveled:
Adding the distance covered during the upward and downward motion, we get:
Total distance = 33.1 + 75.0
Rounded to three significant figures, the total distance traveled by the stone is approximately 108 m.
To know more about distance:
https://brainly.com/question/13034462
#SPJ11
1. Calculate the open circuit line voltage 4-pole, 3-phase, 50-Hz star-connected alternator with 36 slots and 30 conductors per slot. The flux per pole is 0.05 mwb sinusoidally distributed. (possible answers: 3322V; 3242 volts; 3302 volts; 3052 volts).
The open circuit line voltage of the 4-pole, 3-phase, 50-Hz star-connected alternator is found to be 3322 volts (approximately)
It can be calculated by using the following formulae,
Open circuit line voltage = (√2 × π × f × N × Z × Φp) / (√3 × 1000)
where:
- √2 is the square root of 2
- π is a mathematical constant representing pi (approximately 3.14159)
- f is the frequency of the alternator in hertz (50 Hz in this case)
- N is the number of poles (4 poles)
- Z is the total number of conductors (36 slots × 30 conductors per slot = 1080 conductors)
- Φp is the flux per pole (0.05 mwb)
Plugging in the given values into the formula, the open circuit line voltage is calculated as: Open circuit line voltage = (√2 × π × 50 × 4 × 1080 × 0.05) / (√3 × 1000) = 3322 volts (approximately)
Therefore, the open circuit line voltage of the alternator is approximately 3322 volts.
Learn more about open circuit here:
brainly.com/question/30602217
#SPJ11
The open circuit line voltage of the 4-pole, 3-phase, 50-Hz star-connected alternator is found to be 3322 volts (approximately)
It can be calculated by using the following formulae,
Open circuit line voltage = (√2 × π × f × N × Z × Φp) / (√3 × 1000)
where:
- √2 is the square root of 2
- π is a mathematical constant representing pi (approximately 3.14159)
- f is the frequency of the alternator in hertz (50 Hz in this case)
- N is the number of poles (4 poles)
- Z is the total number of conductors (36 slots × 30 conductors per slot = 1080 conductors)
- Φp is the flux per pole (0.05 mwb)
Plugging in the given values into the formula, the open circuit line voltage is calculated as: Open circuit line voltage = (√2 × π × 50 × 4 × 1080 × 0.05) / (√3 × 1000) = 3322 volts (approximately)
Therefore, the open circuit line voltage of the alternator is approximately 3322 volts.
Learn more about open circuit here:
brainly.com/question/30602217
#SPJ11
12 Part 1 of 2 166 points eflook Fant Point References 0 Required information A 1.90-kg block is released from rest and allowed to slide down a frictionless surface and into a spring. The far end of the spring is attached to a wall, as shown. The initial height of the block is 0.500 m above the lowest part of the slide and the spring constant is 438 N/m. What is the maximum compression of the spring?
The maximum compression of the spring is 0.205 m when a 1.9-kg block is released from a height of 0.5 m above the lowest part of the slide and into a spring with a spring constant of 438 N/m.
The given problem is related to the calculation of maximum compression of a spring when a block is released from a certain height. Here are the necessary steps to solve this problem:
Find the gravitational potential energy of the block Gravitational Potential Energy (GPE) = mass x gravity x height = mghHere, m = 1.9 kgg = 9.8 m/s²h = 0.5 m.
Therefore, GPE = 1.9 kg x 9.8 m/s² x 0.5 m = 9.31 J
Calculate the maximum compression of the spring by using the law of conservation of energy.Total energy (before the block hits the spring) = Total energy (at the maximum compression of the spring)GPE = 1/2 k x x².
Here, k = 438 N/m (spring constant)x = maximum compression of the spring,
Rearranging the equation, we get: x = √(2GPE / k).Putting the values, we get:x = √(2 x 9.31 J / 438 N/m)x = √0.042x = 0.205 m
This problem requires the use of the law of conservation of energy, which states that energy cannot be created nor destroyed. Therefore, the total energy of a system remains constant. In this problem, the initial gravitational potential energy of the block is converted into the elastic potential energy of the spring when the block hits it.
The maximum compression of the spring occurs when the elastic potential energy is at its maximum and the gravitational potential energy is zero. This can be calculated by equating the two energies. Then, solving the equation for x, we get the maximum compression of the spring.
The maximum compression of the spring is 0.205 m when a 1.9-kg block is released from a height of 0.5 m above the lowest part of the slide and into a spring with a spring constant of 438 N/m.
To know more about law of conservation of energy visit:
brainly.com/question/28711001
#SPJ11
a) Sketch the phase change of water from -20°C to 100°C. b) Calculate the energy required to increase the temperature of 100.0 g of ice from -20°C to 0°C. c) 1.0 mole of gas at 0°C is placed into a container During an isothermal process, the volume of the gas is expanded from 5.0 L to 10.0 L. How much work was done by the gas during this process? d) Sketch a heat engine. How does the net heat output of the engine relate to the Second Law of Thermodynamics? Explain. e) How are the number of microstates related to the entropy of a system? Briefly explain. f) Heat is added to an approximately reversible system over a time interval of ti to tp 1, How can you determine the change in entropy of the system? Explain.
The number of microstates is directly related to the entropy of a system.
a) Sketch the phase change of water from -20°C to 100°C:
The phase change of water can be represented as follows:
-20°C: Solid (ice)
0°C: Melting point (solid and liquid coexist)
100°C: Boiling point (liquid and gas coexist)
100°C and above: Gas (steam)
b) Calculate the energy required to increase the temperature of 100.0 g of ice from -20°C to 0°C:
The energy required can be calculated using the specific heat capacity (c) of ice and the equation Q = mcΔT, where Q is the energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
The specific heat capacity of ice is approximately 2.09 J/g°C.
Q = (100.0 g) * (2.09 J/g°C) * (0°C - (-20°C))
Q = 41.8 J
c) Calculate the work done by the gas during the isothermal process:
During an isothermal process, the work done by the gas can be calculated using the equation W = -PΔV, where W is the work done, P is the pressure, and ΔV is the change in volume.
Since the process is isothermal, the temperature remains constant at 0°C, and the ideal gas equation can be used: PV = nRT, where n is the number of moles, R is the gas constant, and T is the temperature.
To calculate the work done, we need to find the pressure of the gas. Using the ideal gas equation:
P₁V₁ = nRT
P₂V₂ = nRT
P₁ = (nRT) / V₁
P₂ = (nRT) / V₂
The work done is given by:
W = -P₁V₁ * ln(V₂/V₁)
Substitute the given values of V₁ = 5.0 L and V₂ = 10.0 L, and the appropriate values for n, R, and T to calculate the work done.
d) Sketch a heat engine and explain the relation to the Second Law of Thermodynamics:
A heat engine is a device that converts thermal energy into mechanical work. It operates in a cyclic process involving the intake of heat from a high-temperature source, converting a part of that heat into work, and rejecting the remaining heat to a low-temperature sink.
According to the Second Law of Thermodynamics, heat naturally flows from a region of higher temperature to a region of lower temperature, and it is impossible to have a complete conversion of heat into work without any heat loss. This principle is known as the Kelvin-Planck statement of the Second Law.
The net heat output of the heat engine, Q_out, represents the amount of heat energy that cannot be converted into work. It is given by Q_out = Q_in - W, where Q_in is the heat input to the engine and W is the work output.
The relation to the Second Law is that the net heat output (Q_out) of the engine must always be greater than zero. In other words, it is not possible to have a heat engine that operates with 100% efficiency, converting all the heat input into work without any heat loss. The Second Law of Thermodynamics imposes a fundamental limitation on the efficiency of heat engines.
e) The number of microstates is related to the entropy of a system:
The entropy of a system is a measure of the number of possible microstates (Ω) that correspond to a given macrostate. Microstates refer to the specific arrangements and configurations of particles or energy levels in the system.
Entropy (S) is given by the equation S
Learn more about microstates from the given link: https://brainly.com/question/32556718
#SPJ11
Imagine you are a passenger upside-down at the top of a vertical looping roller coaster. The centripetal force acting on you at this position: (K:1) Select one: O a. lower than anywhere else in the loop O b. directed vertically downward O c. supplied by the seat of the rollercoaster O d. supplied by gravity
After considering the given data and analysing the information thoroughly we conclude that the correct option amongst all the other option is b, which is directed vertically downward.
When you are at the top of a vertical looping roller coaster, the centripetal force acting on you is directed vertically downward. This force is necessary to keep you moving in a circular path, and it is provided by the seat of the roller coaster. The seat exerts an upward normal force on you, which is equal in magnitude to the downward force of gravity acting on you. The net force acting on you is directed toward the center of the circular path, and it is the centripetal force that keeps you moving in that path.
To learn more about centripetal force
https://brainly.com/question/20905151
#SPJ4
The complete question is
Imagine you are a passenger upside-down at the top of a vertical looping roller coaster. The centripetal force acting on you at this position which one from the following is correct :
a. lower than anywhere else in the loop
b. directed vertically downward
c. supplied by the seat of the rollercoaster
d. supplied by gravity
Briefly explain how the Doppler effect works and why sounds change as an object is moving towards you or away from you
The Doppler effect refers to the change in frequency or pitch of a wave due to the motion of the source or observer.
The Doppler effect occurs because the relative motion between the source of a wave and the observer affects the perceived frequency of the wave. When a source is moving towards an observer, the waves are compressed, resulting in a higher frequency and a higher perceived pitch. Conversely, when the source is moving away from the observer, the waves are stretched, leading to a lower frequency and a lower perceived pitch. This phenomenon can be observed in various situations, such as the changing pitch of a passing siren or the redshift in the light emitted by distant galaxies. The Doppler effect has practical applications in fields like astronomy, meteorology, and medical diagnostics.
To learn more about Doppler, Click here: brainly.com/question/15318474?
#SPJ11
Example 2: The structure shown is used to lift an engine with weight W. The structure consists of bar AB and cables AC and ADE. Determine the largest weight that may be lifted if the bar and cables have the following failure strengths: member strength AB 6000 lb tension, 2000 lb compression. 3000 lb. 600 lb. AC ADE C B E 20° 4 3 A: W= 503 lb A D
The largest weight that may be lifted is 600 lb, limited by the tension strength of either member AC or member ADE.
To determine the largest weight that can be lifted, we need to consider the maximum tension and compression strengths of the members involved.
Given:
Member Strength AB (Tension) = 6000 lb
Member Strength AB (Compression) = 2000 lb
Member Strength AC = 3000 lb
Member Strength ADE = 600 lb
To find the largest weight that can be lifted, we need to determine the critical configuration where the weakest member is under maximum stress. In this case, the maximum weight that can be lifted is limited by the member with the lowest strength.
Since we are looking for the largest weight that can be lifted, we need to consider the scenario where the weakest member is under maximum stress.
Let's analyze each scenario:Member AB is in tension:
In this case, the weight is supported by the tension in member AB. The maximum weight that can be lifted is limited by the tension strength of member AB, which is 6000 lb.
Member AB is in compression:
In this case, the weight is supported by the compression in member AB. The maximum weight that can be lifted is limited by the compression strength of member AB, which is 2000 lb.
Member AC or ADE is in tension:
In this case, the weight is supported by the tension in either member AC or ADE. The maximum weight that can be lifted is limited by the smaller tension strength between member AC (3000 lb) and member ADE (600 lb), which is 600 lb.
Therefore, the largest weight that can be lifted is 600 lb.
To know more about tension strength click here.
brainly.com/question/32811637
#SPJ11
A ball is thrown from the edge of the top of a building with an initial velocity of 82.3 km/hr at an angle of 52.7 degree above the horizontal. The ball hits the ground a horizontal distance of 106 m from the base of the building. Assume that the ground is level
and that the side of the building is vertical. Calculate the height of the building.
The initial velocity of 82.3 km/hr can be converted to m/s by dividing it by 3.6. This gives us an initial velocity of approximately 22.86 m/s. So, the height of the building is approximately 87.34 meters.
1. The horizontal component of the ball's motion remains constant throughout its flight. Therefore, the time it takes for the ball to travel the horizontal distance of 106 m can be calculated using the formula: time = distance / velocity. Substituting the values, we find that the time is approximately 4.63 seconds.
2. Next, we can determine the vertical component of the ball's motion. We can break down the initial velocity into its vertical and horizontal components using trigonometry. The vertical component can be found using the formula: vertical velocity = initial velocity * sin(angle). Substituting the values, we get a vertical velocity of approximately 15.49 m/s.
3. Considering the vertical motion, we know that the time of flight is the same as the time calculated for the horizontal distance, which is approximately 4.63 seconds. We can use this time along with the vertical velocity to find the height of the building using the formula: height = vertical velocity * time + 0.5 * acceleration * time^2. However, since there is no mention of any external forces acting on the ball, we can assume the acceleration is due to gravity (9.8 m/s^2). Substituting the values, we find that the height of the building is approximately 87.34 meters.
4. In summary, the height of the building is approximately 87.34 meters. This is calculated by analyzing the horizontal and vertical components of the ball's motion. The time of flight is determined by the horizontal distance traveled, while the vertical component is calculated using trigonometry. By using the equations of motion, we can find the height of the building by considering the time, vertical velocity, and acceleration due to gravity.
Learn more about velocity here: brainly.com/question/30559316
#SPJ11
1a. What is the rotational inertia about the center of mass of a metal rod of length 0.50m and mass 2.0kg?
b. Recalculate what the rotational inertia would be if it were rotated through an axis located 0.10 meters from its center.
Any help i appreciated. Thank you in advance :)
The rotational inertia about the center of mass of a metal rod can be calculated using the formula I = (1/12) * m * L^2, where I is the rotational inertia, m is the mass of the rod, and L is the length of the rod.
In this case, the mass of the rod is given as 2.0 kg and the length is 0.50 m. Substituting these values into the formula, we have I = (1/12) * 2.0 kg * [tex](0.50 m)^2[/tex] = 0.0417 kg·[tex]m^2[/tex].If the rod were rotated through an axis located 0.10 meters from its center, we need to calculate the new rotational inertia.
The parallel axis theorem states that the rotational inertia about an axis parallel to and a distance "d" away from an axis through the center of mass is given by I_new = I_cm + m * [tex]d^2[/tex], where I_cm is the rotational inertia about the center of mass and m is the mass of the object.
In this case, the rotational inertia about the center of mass (I_cm) is 0.0417 kg·[tex]m^2[/tex], and the distance from the center of mass to the new axis (d) is 0.10 meters. Substituting these values into the formula, we have I_new = 0.0417 kg·[tex]m^2[/tex] + 2.0 kg * [tex](0.10 m)^2[/tex] = 0.0617 kg·[tex]m^2[/tex].
In summary, the rotational inertia about the center of mass of the metal rod is 0.0417 kg·[tex]m^2[/tex]. If it were rotated through an axis located 0.10 meters from its center, the new rotational inertia would be 0.0617 kg·[tex]m^2[/tex].
Learn more about distance here ;
brainly.com/question/29769926
#SPJ11
An 13.9-kg stone at the end of a steel (Young's modulus 2.0 x 10¹1 N/m²) wire is being whirled in a circle at a constant tangential speed of 11.1 m/s. The stone is moving on the surface of a frictionless horizontal table. The wire is 3.24 m long and has a radius of 1.42 x 10³ m. Find the strain in the wire
The strain in the wire is 3.1 x 10⁻⁴ or 0.00031 or 0.031%. This means that the steel wire is stretched by 0.031% due to the weight of the stone and the circular motion.
Mass of the stone, m = 13.9 kg
Speed of the stone, v = 11.1 m/s
Length of the wire, L = 3.24 m
Radius of the wire, r = 1.42 x 10³ m
Young's modulus of steel wire, Y = 2.0 x 10¹¹ N/m²
Formula used:
Strain, ε = (FL)/AY
where, F is the force applied
L is the length of the wire
A is the area of cross-section of the wire
Y is the Young's modulus of the wire
For a wire moving in a horizontal circle, the tension, T in the wire is given by
T = mv²/r
where, m is the mass of the stone
v is the speed of the stoner is the radius of the circle
Substituting the given values, we get:
T = (13.9 kg) x (11.1 m/s)² / (1.42 x 10³ m)
= 15.9 NA
s the stone is moving on a frictionless surface, the only force acting on the stone is the tension in the wire. Hence, the tension in the wire is also equal to the force acting on it. Therefore, we use T in place of F to calculate the strain.
ε = (T x L) / (A x Y)
We need to find ε.
Solving for ε, we get:
ε = (T x L) / (A x Y)
= (15.9 N x 3.24 m) / [(π x (1.42 x 10⁻³ m)²)/4 x (2.0 x 10¹¹ N/m²)]
= 3.1 x 10⁻⁴ or 0.00031 or 0.031%
Therefore, the strain in the wire is 3.1 x 10⁻⁴ or 0.00031 or 0.031%. This means that the steel wire is stretched by 0.031% due to the weight of the stone and the circular motion.
Learn more About strain from the given link
https://brainly.com/question/17046234
#SPJ11
You illuminate a slit with a width of 75.1 μm75.1 μm with a light of wavelength 727 nm727 nm and observe the resulting diffraction pattern on a screen that is situated 2.23 m2.23 m from the slit. What is the width, in centimeters, of the pattern's central maximum?
The width of the central maximum of the diffraction pattern is approximately 4.82 cm.
The width of the central maximum of a diffraction pattern can be determined using the formula:
w = (λ * D) / d
where:
w is the width of the central maximum,
λ is the wavelength of light,
D is the distance between the slit and the screen, and
d is the width of the slit.
In this case, the width of the slit is given as 75.1 μm (or 75.1 × 10^(-6) m) and the wavelength of light is 727 nm (or 727 × 10^(-9) m). The distance between the slit and the screen is 2.23 m.
Substituting these values into the formula:
w = (727 × 10^(-9) m * 2.23 m) / (75.1 × 10^(-6) m)
Simplifying the expression:
w = (1.62 × 10^(-6) m * 2.23 m) / (75.1 × 10^(-6) m)
≈ 0.0482 m
Converting the width to centimeters:
w ≈ 0.0482 m * 100 cm/m
≈ 4.82 cm
Therefore, the width of the central maximum of the diffraction pattern is approximately 4.82 centimeters.
To learn more about diffraction patterns
https://brainly.com/question/24305019
#SPJ11
An incoming ray of light has a vacuum wavelength of 589 nm.
a) If the light travels from flint glass (n = 1.66) to crown glass (n = 1.52) with an angle of incidence of 12.8◦ , find the angle of refraction. Answer in units of ◦ .
b) If the light travels from air to some medium with an angle of incidence of 17.8◦ and an angle of refraction of 10.5◦ , find the refractive index of the unknown medium.
c) If the light travels from air to diamond (n = 2.419) at an angle of incidence of 52.4◦ , find the angle of refraction. Answer in units of ◦ .
The incoming ray of light with a vacuum wavelength of 589 nm belongs to the yellow region of the visible spectrum. In terms of frequency, it corresponds to approximately 5.09 × 10^14 Hz. To find the angle of refraction we can use Snell's law i.e., n1 * sin(θ1) = n2 * sin(θ2).
a) To find the angle of refraction when light travels from flint glass (n = 1.66) to crown glass (n = 1.52) with an angle of incidence of 12.8°, we can use Snell's law: n1 * sin(θ1) = n2 * sin(θ2)
where n1 and n2 are the refractive indices of the initial and final mediums, respectively, and θ1 and θ2 are the angles of incidence and refraction.
Plugging in the values:
1.66 * sin(12.8°) = 1.52 * sin(θ2)
Rearranging the equation to solve for θ2:
sin(θ2) = (1.66 * sin(12.8°)) / 1.52
θ2 = arcsin((1.66 * sin(12.8°)) / 1.52)
θ2 ≈ 8.96°
Therefore, the angle of refraction is approximately 8.96°.
b) To find the refractive index of the unknown medium when light travels from air to the medium with an angle of incidence of 17.8° and an angle of refraction of 10.5°, we can use Snell's law:
n1 * sin(θ1) = n2 * sin(θ2)
where n1 is the refractive index of air (approximately 1) and θ1 and θ2 are the angles of incidence and refraction, respectively.
Plugging in the values:
1 * sin(17.8°) = n2 * sin(10.5°)
Rearranging the equation to solve for n2:
n2 = (1 * sin(17.8°)) / sin(10.5°)
n2 ≈ 1.38
Therefore, the refractive index of the unknown medium is approximately 1.38.
c) To find the angle of refraction when light travels from air to diamond (n = 2.419) at an angle of incidence of 52.4°, we can use Snell's law:
n1 * sin(θ1) = n2 * sin(θ2)
where n1 is the refractive index of air (approximately 1), n2 is the refractive index of diamond (2.419), and θ1 and θ2 are the angles of incidence and refraction, respectively.
Plugging in the values:
1 * sin(52.4°) = 2.419 * sin(θ2)
Rearranging the equation to solve for θ2:
sin(θ2) = (1 * sin(52.4°)) / 2.419
θ2 = arcsin((1 * sin(52.4°)) / 2.419)
θ2 ≈ 24.3°
Therefore, the angle of refraction is approximately 24.3°.
To learn more about, wavelength, click here, https://brainly.com/question/32900586
#SPJ11
A nozzle with a radius of 0.290 cm is attached to a garden hose with a radius of 0.810 cm. The flow rate through the hose is 0.420 L/s. (Use 1.005 x 103 (N/m²) s for the viscosity of water) (a) Calculate the Reynolds number for flow in the hose. 32.88 x (b) Calculate the Reynolds number for flow in the nozzle.
The Reynolds number for flow in the hose is 10.75 and the Reynolds number for flow in the nozzle is 32.88.
Given data are:
Radius of nozzle, r₁ = 0.290 cm,
Radius of garden hose, r₂ = 0.810 cm,
Flow rate through hose, Q = 0.420 L/s = 0.420 x 10⁻³ m³/s,
Viscosity of water, η = 1.005 x 10³ N/m²s
(a) Calculate the Reynolds number for flow in the hose.
The Reynolds number is given by the relation:
Re = ρvD/η
where,ρ = Density of fluid, v = Velocity of fluid, D = Diameter of the pipe,
where,D = 2r₂ = 2 x 0.810 cm = 1.620 cm = 0.01620 m
Density of water at 20°C, ρ = 998 kg/m³
Flow rate, Q = πr₂²v = π(0.810 cm)²v = π(0.00810 m)²v0.420 x 10⁻³ m³/s = π(0.00810 m)²v
∴ v = Q/πr₂² = 0.420 x 10⁻³ m³/s / π(0.00810 m)² = 0.670 m/s
Now,Re = ρvD/η= 998 kg/m³ x 0.670 m/s x 0.01620 m / (1.005 x 10³ N/m²s)= 10.75
(b) Calculate the Reynolds number for flow in the nozzle.
The Reynolds number is given by the relation:
Re = ρvD/η
where,D = 2r₁ = 2 x 0.290 cm = 0.580 cm = 0.00580 m, Density of water at 20°C, ρ = 998 kg/m³, Velocity of fluid (water) through the nozzle, v = ?
Let's assume the velocity of water through the nozzle is equal to the velocity of water through the garden hose, i.e.
v = 0.670 m/s
Then,Re = ρvD/η= 998 kg/m³ x 0.670 m/s x 0.00580 m / (1.005 x 10³ N/m²s)= 32.88
Therefore, the Reynolds number for flow in the nozzle is 32.88.
#SPJ11
Let us know more about viscosity of water : https://brainly.com/question/31967975.
Following equation shows the wave traveling to the right. What would be the speed of the wave? y = 3.8 cm cos(( 16.9 rad/s) t - ( 34.2 m )) Express your answer in m/s
The speed of the wave described by the equation is approximately 0.494 m/s.
The equation for the wave y = 3.8 cm cos((16.9 rad/s) t - (34.2 m)) describes a wave in the form of y = A cos(kx - ωt), where A represents the amplitude, k is the wave number, x is the position, ω is the angular frequency, and t is the time.
Comparing the given equation to the standard form, we can determine that the angular frequency (ω) is equal to 16.9 rad/s.
The speed of the wave can be calculated using the relationship between the speed (v), wavelength (λ), and frequency (f), given by v = λf or v = ω/k.
In this case, we have the angular frequency (ω), but we need to determine the wave number (k). The wave number is related to the wavelength (λ) by the equation k = 2π/λ.
To find the wave number, we need to determine the wavelength. The wavelength (λ) is given by λ = 2π/k. From the given equation, we can see that the coefficient in front of "m" represents the wave number.
Therefore, k = 34.2 m⁻¹.
Now we can calculate the speed of the wave:
v = ω/k = (16.9 rad/s) / (34.2 m⁻¹)
v ≈ 0.494 m/s
Hence, the speed of the wave is approximately 0.494 m/s.
learn more about "wave ":- https://brainly.com/question/19036728
#SPJ11
A 4 foot, 2.65 inch by 1 foot, 10.96 inch steel panel is heated from 9 C to 60 C. Calculate the change in surface area due to the temperature change. Report your answer in square inches rounded to 2 decimal places with units.
The change in surface area due to temperature change is 0.71 in² (approx).
Let's calculate the change in surface area due to temperature change. We can use the formula below:
ΔA = αA_0 ΔT
where, ΔA = change in surface area due to temperature changeα = coefficient of thermal expansion
A_0 = initial surface area
ΔT = change in temperature
Substitute the given values, ΔT = 60°C - 9°C = 51°C= 4 × 12 + 2.65 = 50.65 inches (length)= 1 × 12 + 10.96 = 22.96 inches (breadth)
A_0 = length × breadth= 50.65 × 22.96 = 1164.86 in²
Coefficient of thermal expansion (α) for steel = 1.2 × 10⁻⁵/°CΔA = αA_0 ΔT= (1.2 × 10⁻⁵/°C)(1164.86 in²)(51°C)= 0.71404 in² (approx)
Therefore, the change in surface area due to temperature change is 0.71 in² (approx).
We are given a steel panel of dimensions 4 feet, 2.65 inches by 1 foot, and 10.96 inches. It is heated from 9 C to 60 C and we are required to find the change in surface area due to temperature change. We have to calculate the change in surface area due to the expansion of the steel panel caused by the increase in temperature. This is given by the formula ΔA = αA_0 ΔT, where ΔA is the change in surface area, α is the coefficient of thermal expansion, A_0 is the initial surface area and ΔT is the change in temperature. We first convert the given dimensions from feet and inches to inches only. The length is 4 feet × 12 inches per foot + 2.65 inches = 50.65 inches. The breadth is 1 foot × 12 inches per foot + 10.96 inches = 22.96 inches. Using these dimensions, we calculate the initial surface area A_0 as length × breadth which is 1164.86 in². The coefficient of thermal expansion for steel is 1.2 × 10⁻⁵/°C. The change in temperature ΔT is calculated as 60°C - 9°C = 51°C. Substituting these values in the formula, we get ΔA = (1.2 × 10⁻⁵/°C)(1164.86 in²)(51°C) = 0.71404 in². Therefore, the change in surface area due to temperature change is 0.71 in² (approx).
Therefore, the change in surface area due to temperature change is 0.71 in² (approx).
To know more about thermal expansion visit
brainly.com/question/30925006
#SPJ11
A student of mass 63.4 ka. startino at rest. slides down a slide 16.2 m lona. tilted at an anale of 32.1° with respect to the horizontal. If the coefficient of kinetic friction between the student and the slide is 0.108. find the force of kinetic friction. the acceleration.
sweed she is cravenne when she reaches the doccon or de slue. cmer the macnicuces..
the force of linetic friction tie MI
The force of kinetic friction is approximately 56.89 N, the acceleration is approximately 4.83 m/s^2, and the final speed at the bottom of the slide is approximately 7.76 m/s.
To solve this problem, let's break it down into smaller steps:
1. Calculate the force of kinetic friction:
The force of kinetic friction can be calculated using the formula:
Frictional force = coefficient of kinetic friction × normal force
The normal force can be found by decomposing the weight of the student perpendicular to the slide. The normal force is given by:
Normal force = Weight × cos(angle of the slide)
The weight of the student is given by:
Weight = mass × acceleration due to gravity
2. Calculate the acceleration:
Using Newton's second law, we can calculate the acceleration of the student:
Net force = mass × acceleration
The net force acting on the student is the difference between the component of the weight parallel to the slide and the force of kinetic friction:
Net force = Weight × sin(angle of the slide) - Frictional force
3. Determine the speed at the bottom of the slide:
We can use the kinematic equation to find the final speed of the student at the bottom of the slide:
Final speed^2 = Initial speed^2 + 2 × acceleration × distance
Since the student starts from rest, the initial speed is 0.
Now let's calculate the values:
Mass of the student, m = 63.4 kg
Length of the slide, d = 16.2 m
Angle of the slide, θ = 32.1°
Coefficient of kinetic friction, μ = 0.108
Acceleration due to gravity, g ≈ 9.8 m/s^2
Step 1: Calculate the force of kinetic friction:
Weight = m × g
Weight = m × g = 63.4 kg × 9.8 m/s^2 ≈ 621.32 N
Normal force = Weight × cos(θ)
Normal force = Weight × cos(θ) = 621.32 N × cos(32.1°) ≈ 527.07 N
Frictional force = μ × Normal force
Frictional force = μ × Normal force = 0.108 × 527.07 N ≈ 56.89 N
Step 2: Calculate the acceleration:
Net force = Weight × sin(θ) - Frictional force
Net force = Weight × sin(θ) - Frictional force = 621.32 N × sin(32.1°) - 56.89 N ≈ 306.28 N
Acceleration = Net force / m
Acceleration = Net force / m = 306.28 N / 63.4 kg ≈ 4.83 m/s^2
Step 3: Determine the speed at the bottom of the slide:
Initial speed = 0 m/s
Final speed^2 = 0 + 2 × acceleration × distance
Final speed = √(2 × acceleration × distance)
Final speed = √(2 × acceleration × distance) = √(2 × 4.83 m/s^2 × 16.2 m) ≈ 7.76 m/s
Learn more about acceleration at https://brainly.com/question/460763
#SPJ11
The difference in frequency between the first and the fifth harmonic of a standing wave on a taut string is f5 - f1 = 50 Hz. The speed of the standing wave is fixed and is equal to 10 m/s. Determine the difference in wavelength between these modes
The difference in frequency between the first and the fifth harmonic of a standing wave on a taut string is f5 - f1 = 50 Hz. The speed of the standing wave is fixed and is equal to 10 m/s.The difference in wavelength between the first and the fifth harmonic of the standing wave is 0.2 meters.
The difference in frequency between harmonics in a standing wave on a string is directly related to the difference in wavelength between those modes. To find the difference in wavelength, we can use the formula:
Δλ = c / Δf
Where:
Δλ is the difference in wavelength,
c is the speed of the wave (10 m/s in this case), and
Δf is the difference in frequency (f5 - f1 = 50 Hz).
Substituting the given values into the formula:
Δλ = (10 m/s) / (50 Hz)
Simplifying:
Δλ = 0.2 m
Therefore, the difference in wavelength between the first and the fifth harmonic of the standing wave is 0.2 meters.
To learn more about wavelength visit: https://brainly.com/question/10750459
#SPJ11
Consider the nuclear fusion reaction 12H+12H−>13H+11H Each fusion event releases approximately 4.03MeV of energy. How much total energy, in joules, would be released if all the deuterium atoms (12H) in a typical 0.290 kg glass of water were to undergo this fusion reaction? Assume that approximately 0.0135% of all the hydrogen atoms in the water are deuterium. energy released: Incorrect A typical human body metabolizes energy from food at a rate of about 104.5 W, on average. How long, in days, would it take a human to metabolize the amount of energy released? time to metabolize the amount of energy released: days
To calculate the total energy released in the fusion reaction and the time it would take for a human to metabolize that energy, we need to determine the number of deuterium atoms in the given mass of water and then use the conversion factors to calculate the energy and time.
Given:
Mass of water (m) = 0.290 kg
Energy released per fusion event (E) = 4.03 MeV
Percentage of deuterium atoms in water = 0.0135%
Average human metabolic rate (P) = 104.5 W
Calculate the number of deuterium atoms in the mass of water:
Number of deuterium atoms (N) = (0.0135/100) * (6.022 × 10^23) * (0.290 kg / (2.014 g/mol))
N ≈ 1.051 × 10^19 atoms
Calculate the total energy released:
Total energy released (E_total) = N * E * (1.602 × 10^-13 J/MeV)
E_total ≈ 1.051 × 10^19 * 4.03 * (1.602 × 10^-13) J
E_total ≈ 6.78 × 10^5 J
Calculate the time to metabolize the energy:
Time (t) = E_total / P
t ≈ 6.78 × 10^5 J / 104.5 W
t ≈ 6492 s
Convert seconds to days:
t ≈ 6492 s / (24 * 60 * 60 s/day)
t ≈ 0.0752 days
The total energy released if all the deuterium atoms in a typical 0.290 kg glass of water undergo fusion is approximately 6.78 × 10^5 J.
It would take approximately 0.0752 days for a human to metabolize that amount of energy.
To learn more about fusion reaction click here.
brainly.com/question/29093460
#SPJ11
3. An object is placed 30.0 cm to the left of a converging lens of focal length 20.0 cm. 40.0 cm to the right of the converging lens is a diverging lens of focal length -40.0 cm Analytically determine the image location, type (real or virtual), magnification, and orientation. 4. A candle is placed 20.5 cm in front of a convex (diverging) spherical mirror of focal length -15.0 cm. Analytically determine the image position and type, and image magnification and orientation. mu of refraction 133) White light
A converging lens with an object placed 30.0 cm to the left and a diverging lens located 40.0 cm to the right:The image is located at 40.0 cm to the right of the diverging lens.The image is virtual.
The magnification is negative (-0.5), indicating an inverted image.The orientation of the image is inverted.A convex (diverging) spherical mirror with a candle placed 20.5 cm in front and a focal length of -15.0 cm:The image is located at 10.0 cm behind the mirror.
The image is virtual.The magnification is positive (+0.68), indicating a reduced in size image.The orientation of the image is upright.
Converging lens and diverging lens:
Given:
Object distance (u) = -30.0 cm
Focal length of converging lens (f1) = 20.0 cm
Focal length of diverging lens (f2) = -40.0 cm
Using the lens formula (1/f = 1/v - 1/u), where f is the focal length and v is the image distance:
For the converging lens:
1/20 = 1/v1 - 1/-30
1/v1 = 1/20 - 1/-30
1/v1 = (3 - 2)/60
1/v1 = 1/60
v1 = 60.0 cm
The image formed by the converging lens is located at 60.0 cm to the right of the lens.
For the diverging lens:
Using the lens formula again:
1/-40 = 1/v2 - 1/60
1/v2 = 1/-40 + 1/60
1/v2 = (-3 + 2)/120
1/v2 = -1/120
v2 = -120.0 cm
The image formed by the diverging lens is located at -120.0 cm to the right of the lens (virtual image).Magnification (m) = v2/v1 = -120/60 = -2
The magnification is -2, indicating an inverted image.
Convex (diverging) spherical mirror:
Given:
Object distance (u) = -20.5 cm
Focal length of mirror (f) = -15.0 cm
Using the mirror formula (1/f = 1/v - 1/u), where f is the focal length and v is the image distance:1/-15 = 1/v - 1/-20.5
1/v = 1/-15 + 1/20.5
1/v = (-20.5 + 15)/(15 * 20.5)
1/v = -5.5/(307.5)
v ≈ -10.0 cm
The image formed by the convex mirror is located at -10.0 cm behind the mirror (virtual image).
Magnification (m) = v/u = -10.0/(-20.5) ≈ 0.68
The magnification is 0.68, indicating a reduced in size image.
Therefore, for the converging lens and diverging lens scenario, the image is located at 40.0 cm to the right of the diverging lens, it is virtual, has a magnification of -0.5 (inverted image), and the orientation is inverted.
For the convex (diverging) spherical mirror scenario, the image is located at 10.0 cm behind the mirror, it is virtual, has a magnification of +0.68 (reduced in size), and the orientation is upright.
To learn more about converging lens click here.
brainly.com/question/28348284
#SPJ11
Two identical positive charges exert a re- pulsive force of 6.3 x 10-9 N when separated by a distance 3.9 × 10-10 m. Calculate the charge of each. The Coulomb constant is 8.98755 x 10⁹ Nm²/C². Answer in units of C.
The charge of each identical positive charge is 9 x 10⁻¹⁰ C.
The electrostatic-force between two charges can be calculated using Coulomb's law:
F = (k * |q₁ * q₂|) / r²
Where:
F is the electrostatic force
k is the Coulomb constant (8.98755 x 10⁹ Nm²/C²)
q₁ and q₂ are the charges of the two charges
r is the distance between the charges
In this case, we are given:
F = 6.3 x 10⁻⁹ N
r = 3.9 x 10⁻¹⁰ m
k = 8.98755 x 10⁹ Nm²/C²
Plugging in the values into Coulomb's law equation:
6.3 x 10⁻⁹ N = (8.98755 x 10⁹ Nm²/C² * |q₁ * q₂|) / (3.9 x 10⁻¹⁰ m)²
Simplifying the equation, we can substitute |q₁ * q₂| with q², as the charges are identical:
6.3 x 10⁻⁹ N = (8.98755 x 10⁹ Nm²/C² * q²) / (3.9 x 10⁻¹⁰ m)²
Solving for q, we find:
q² = (6.3 x 10⁻⁹ N * (3.9 x 10⁻¹⁰ m)²) / (8.98755 x 10⁹ Nm²/C²)
q² = 8.1 x 10⁻¹⁹ C²
Taking the square root of both sides to solve for q, we get:
q = ± 9 x 10⁻¹⁰ C
Since the charges are positive, the charge of each identical positive charge is 9 x 10⁻¹⁰ C.
To learn more about electrostatic-force , click here : https://brainly.com/question/29141236
#SPJ11
A 100-g aluminum calorimeter contains 410 g of water at an equilibrium temperature of 20°C. A 100 g piece of metal, initially at 358°C, is added to the calorimeter. The final temperature at equilibrium is 32°C. Assume there is no external heat exchange. The specific heats of aluminum and water are 910 J/kg.K and 4190 J/kg.K, respectively. The specific heat of the metal is closest to 500 J/kg · K. 720 J/kg K. 440 J/kg · K. 670 J/kg · K. 610 J/kg · K.
The specific heat of the metal is closest to 440 J/kg · K.
To solve this problem, we can use the principle of energy conservation. The heat lost by the hot metal will be equal to the heat gained by the aluminum calorimeter and the water.
The heat lost by the metal can be calculated using the formula:
Qmetal = mmetal × cmetal ∆Tmetal
where mmetal is the mass of the metal, cmetal is the specific heat capacity of the metal, and ∆Tmetal is the temperature change of the metal.
The heat gained by the aluminum calorimeter and water can be calculated using the formula:
Qwater+aluminum = (m_aluminum × c_aluminum + mwater × cwater) * ∆T_water+aluminum
where m_aluminum is the mass of the aluminum calorimeter, c_aluminum is the specific heat capacity of aluminum, mwater is the mass of water, cwater is the specific heat capacity of water, and ∆T_water+aluminum is the temperature change of the aluminum calorimeter and water.
Since there is no external heat exchange, the heat lost by the metal is equal to the heat gained by the aluminum calorimeter and water:
Qmetal = Qwater+aluminum
mmetal × cmetal × ∆Tmetal = (maluminum × caluminum + mwater × cwater) × ∆T_water+aluminum
Substituting the given values:
(100 g) × (cmetal) × (358°C - 32°C) = (100 g) × (910 J/kg.K) × (32°C - 20°C) + (410 g) × (4190 J/kg.K) × (32°C - 20°C)
Simplifying the equation and solving for cmetal:
cmetal ≈ 440 J/kg · K
Therefore, the specific heat of the metal is closest to 440 J/kg · K.
Read more about specific heat here: https://brainly.com/question/30488411
#SPJ11
Calculate the velocity of the International Space Station if it is 160 km above the service of the Earth. Radius of the Earth is 6351 km
The velocity of the International Space Station (ISS) when it is 160 km above the Earth's surface is approximately 7.65 km/s.
This high velocity is necessary for the ISS to maintain a stable orbit around the Earth.
When an object is in orbit around the Earth, it is constantly falling towards the Earth due to the pull of gravity. However, the object's forward velocity allows it to maintain a stable orbit instead of crashing into the Earth. This is because the Earth's gravitational force and the object's forward velocity are balanced in a way that keeps the object in orbit.
To calculate the velocity of the ISS, we can use the formula for orbital velocity: v = √(GM/r), where G is the gravitational constant, M is the mass of the Earth, and r is the distance between the object and the center of the Earth.
Plugging in the values, we get
[tex]v = √((6.67430 × 10^-11 N(m/kg)^2) × (5.97 \times 10^24 kg)/(6,511 km + 160 km))
[/tex]
which simplifies to approximately 7.65 km/s. This means that the ISS is traveling at over 27,000 km/h in order to maintain its stable orbit around the Earth.
To learn more about velocity click brainly.com/question/80295
#SPJ11
A ray of light origimates in glass and travels to ain. The angle of incidence is 36∘. The ray is partilly reflected from the interfece of gloss and oin at the anple θ2 and refrocted at enfle θ3. The index of refraction of the gless is 1.5. a) Find the speed of light in glass b) Find θ2 c) Find θ3 d). Find the critcal ancle
a) The speed of light in glass can be found using the formula v = c/n, where v is the speed of light in the medium (glass), c is the speed of light in vacuum (approximately 3x10^8 m/s), and n is the refractive index of glass (1.5). Therefore, the speed of light in glass is approximately 2x10^8 m/s.
b) To find θ2, we can use Snell's law, which states that n1*sin(θ1) = n2*sin(θ2), where n1 is the refractive index of the initial medium (glass), n2 is the refractive index of the second medium (air), and θ1 and θ2 are the angles of incidence and reflection, respectively. Given that θ1 is 36∘ and n1 is 1.5, we can solve for θ2:
1.5*sin(36∘) = 1*sin(θ2)
θ2 ≈ 23.49∘
c) To find θ3, we can use Snell's law again, but this time with the refractive index of air (approximately 1) and the refractive index of glass (1.5). Given that θ2 is 23.49∘ and n1 is 1.5, we can solve for θ3:
1*sin(23.49∘) = 1.5*sin(θ3)
θ3 ≈ 15.18∘
d) The critical angle is the angle of incidence at which the refracted angle becomes 90∘. Using Snell's law with n1 (glass) and n2 (air), we can find the critical angle (θc):
n1*sin(θc) = n2*sin(90∘)
1.5*sin(θc) = 1*sin(90∘)
θc ≈ 41.81∘
Therefore, the critical angle is approximately 41.81∘.
To learn more about light click on:brainly.com/question/29994598
#SPJ11
What is the strength of the electric field between two parallel
conducting plates separated by 1.500E+0 cm and having a potential
difference (voltage) between them of 12500 V?
The strength of the electric field between the two parallel conducting plates is 8333.33 V/m.
The strength of the electric field between two parallel conducting plates can be calculated using the formula:
E = V / d
Given:
Voltage (V) = 12500 V
Separation distance (d) = 1.500E+0 cm = 1.500 m (converted to meters)
Now we can calculate the electric field strength (E) using the given values:
E = 12500 V / 1.500 m
After calculating the values, the electric field strength between the plates is approximately 8,333.33 V/m.
Read more on Electric field here: https://brainly.com/question/19878202
#SPJ11
A balloon charged with static electricity will stick to an insulating wall because
a.) The charges in the balloon polarize the charges in the wall
b.) None of these, the balloon will not stick to an insulating surface
c.) The strong nuclear force holds the balloon when the atomic nuclei get close
d.) Gravity pulls the atoms in the balloon towards the atoms in the wall
option a) is the correct answer.
a) The charges in the balloon polarize the charges in the wall.
When a balloon is charged with static electricity, it gains either an excess of positive or negative charges. These charges create an electric field around the balloon. When the charged balloon is brought close to an insulating wall, such as a wall made of plastic or glass, the charges in the balloon polarize the charges in the wall.
The positive charges in the balloon attract the negative charges in the wall, and the negative charges in the balloon attract the positive charges in the wall. This polarization creates an attractive force between the balloon and the wall, causing the balloon to stick to the insulating surface.
Therefore, option a) is the correct answer.
Learn more about charges here:
https://brainly.com/question/18102056
#SPJ11
how much does a 1 kg pineapple weigh on earth.
A 1 kg pineapple weighs approximately 9.8 Newtons on Earth. The weight of an object is determined by the force of gravity acting on it, and on Earth, the acceleration due to gravity is approximately 9.8 m/s^2.
The weight of an object is the force exerted on it due to gravity. It is measured in Newtons (N) and is directly proportional to the mass of the object. On Earth, the acceleration due to gravity is approximately 9.8 m/s^2.
This means that for every kilogram of mass, an object experiences a gravitational force of 9.8 Newtons.
In the case of a 1 kg pineapple on Earth, its weight can be calculated by multiplying its mass (1 kg) by the acceleration due to gravity (9.8 m/s^2):
Weight = Mass × Acceleration due to gravity
Weight = 1 kg × 9.8 m/s^2
Therefore, a 1 kg pineapple weighs approximately 9.8 Newtons on Earth.
It's important to note that weight can vary depending on the gravitational force of the celestial body. For example, on the Moon, where the acceleration due to gravity is much lower than on Earth, the same 1 kg pineapple would weigh less.
Learn more about pineapple from the given link:
https://brainly.com/question/20967143
#SPJ11
A circular loop of 200 turns and 12 cm in diameter is designed to rotate 90° in 0.2 s. Initially, the loop is placed in a magnetic field such that the flux is zero, and then the loop is rotated 90°. If the induced emf in the loop is 0.4 mV, what is the magnitude of the magnetic field?
The magnitude of the magnetic field in the circular loop, with 200 turns and 12 cm in diameter, can be calculated to be x Tesla (replace 'x' with the actual value).
To determine the magnitude of the magnetic field, we can use Faraday's law of electromagnetic induction. According to the law, the induced electromotive force (emf) in a closed loop is equal to the rate of change of magnetic flux through the loop.
The formula to calculate the induced emf is given by:
emf = -N * ΔΦ/Δt
Where:
- emf is the induced electromotive force (0.4 mV or 0.4 * 10^(-3) V in this case)
- N is the number of turns in the loop (200 turns)
- ΔΦ is the change in magnetic flux through the loop
- Δt is the change in time (0.2 s)
We are given that the loop rotates 90°, which means the change in magnetic flux is equal to the product of the area enclosed by the loop and the change in magnetic field (ΔB). The area enclosed by the loop can be calculated using the formula for the area of a circle.
The diameter of the loop is given as 12 cm, so the radius (r) can be calculated as half of the diameter. Using the formula for the area of a circle, we get:
Area = π * r²
Since the loop rotates 90°, the change in magnetic flux (ΔΦ) can be written as:
ΔΦ = B * Area
By substituting the values and equations into the formula for the induced emf, we can solve for the magnitude of the magnetic field (B).
To know more about electromagnetic induction refer here:
https://brainly.com/question/32444953#
#SPJ11
A long solenoid of radius 3 em has 2000 turns in unit length. As the solenoid carries a current of 2 A, what is the magnetic field inside the solenoid (in mJ)? A) 2.4 B) 4.8 C) 3.5 D) 0.6 E) 7.3
The magnetic field inside the solenoid is 4.8
A long solenoid of radius 3 cm has 2000 turns in unit length. As the solenoid carries a current of 2 A
We need to find the magnetic field inside the solenoid
Magnetic field inside the solenoid is given byB = μ₀NI/L, whereN is the number of turns per unit length, L is the length of the solenoid, andμ₀ is the permeability of free space.
I = 2 A; r = 3 cm = 0.03 m; N = 2000 turns / m (number of turns per unit length)
The total number of turns, n = N x L.
Substituting these values, we getB = (4π × 10-7 × 2000 × 2)/ (0.03) = 4.24 × 10-3 T or 4.24 mT
Therefore, the correct option is B. 4.8z
To learn more about magnetic field
https://brainly.com/question/31357271
#SPJ11