The scale will read 708.2 kg during the acceleration.
This is because during the acceleration, the hoisting cable applies a force of 9300 N to the elevator. This force is equal to the sum of the masses of the woman and the elevator multiplied by the acceleration.
Since the combined mass of the elevator and the woman is 816 kg, the force is equal to 816 kg multiplied by the acceleration. Therefore, the scale will read the sum of the woman's mass (61.8 kg) and the elevator's mass (746.2 kg) multiplied by the acceleration. Therefore, the scale will read 708.2 kg during the acceleration.
In conclusion, the scale will read 708.2 kg during the acceleration because the hoisting cable applies a force equal to the sum of the masses of the woman and the elevator multiplied by the acceleration. This force is applied to the elevator, and the scale will read the sum of the woman's mass and the elevator's mass multiplied by the acceleration.
Know more about acceleration here
https://brainly.com/question/12550364#
#SPJ11
al is floating freely in his spacecraft, and you are accelerating away from him with an acceleration of 9.8 m/s2. how will you feel in your spacecraft? group of answer choices you will feel weight, but less than on earth. you will feel yourself pressed against the back of your spaceship with great force, making it difficult to move. you will feel the same weight as you do on earth. you will be floating weightlessly. you will feel weight, but more than on earth.
You will feel yourself pressed against the back of your spacecraft with great force, making it difficult to move. This is because when you accelerate, the force of gravity is increased, causing you to feel an increased weight.
This option is the correct one. As per Newton's second law, the force of the body is directly proportional to the mass and acceleration. Here, the acceleration is 9.8 m/s2, which means you will feel yourself pressed against the back of your spaceship with great force, making it difficult to move, you will feel the same weight as you do on earth.
This is an incorrect option because the acceleration is greater than 1g, which means the weight will be greater than the actual weight.you will be floating weightlessly. This is an incorrect option because there is an acceleration, which means you will not be floating weightlessly.you will feel weight, but more than on earth. This is an incorrect option because the acceleration is greater than 1g, which means the weight will be greater than the actual weight.
Read more about force:
https://brainly.com/question/12785175
#SPJ11
if a planet were orbiting the sun in an orbit two times as far as its current orbit, how many times longer would it take the planet to go around the sun, as compared to now?
If a planet were orbiting the sun in an orbit two times as far as its current orbit, the planet will take 4 times longer to go around the sun than now.
What is an Orbit?
An orbit is a path that an object takes around another object in space, such as the path of the Earth around the sun. The planets all move in an orbit around the sun because the sun's gravitational force holds them in their orbits.
The distance between the planets and the sun differs depending on their location in the solar system, as well as the stage of their elliptical orbits. For example, Venus and Mars will be much nearer to Earth than Neptune and Saturn, which will be much farther away. This is due to the fact that the planets move in an elliptical orbit rather than a circular one. This implies that the distance between them and the sun varies throughout their orbit.
Astronomers measure distances in our solar system in astronomical units (AU). One AU is equal to the distance from the Earth to the sun, which is approximately 93 million miles. The sun's closest planet, Mercury, is about 0.4 AU away from it, while the most distant planet, Neptune, is about 30 AU away from it. Other objects in the solar system, such as comets and asteroids, can be located much further away from the sun.
To know more about astronomical units (AU):
https://brainly.com/question/8590563
#SPJ11
Drag each label to the correct location on the chart.
Sort the statements based on whether the described outcomes result from thermal energy being added or being removed.
Particles move faster.
Particles move slower.
Temperature increases.
Temperature decreases.
Kinetic energy increases.
Kinetic energy decreases.
those are the options
The outcomes based on whether thermal energy is added or being removed are:
Thermal energy added :
Particles move fasterTemperature increasesKinetic energy increasesThermal energy being removed :
Particles move slower.Temperature decreases.Kinetic energy decreasesHow does thermal energy affect particles, temperature and kinetic energy ?When thermal energy is added to a substance, the particles absorb this energy and start moving faster, which means their kinetic energy increases. This leads to an increase in temperature because the faster-moving particles collide with each other more frequently, transferring this extra energy in the form of heat.
Therefore, an increase in temperature and an increase in the kinetic energy of particles result from thermal energy being added, while a decrease in temperature and a decrease in the kinetic energy of particles result from thermal energy being removed.
Find out more on thermal energy at https://brainly.com/question/30779509
#SPJ1
your instructor challenges you and your friend to pull on the ends of a horizontal rope attached to a pair of scales in a tug-of-war, but in such a way that the scale readings on the scales are different. can this be done? explain.
Answer:
If the scale readings are different then there will be a net force on the person attached to the scales:
Consider any point on the rope - if the forces in each direction are the same there is no acceleration of the rope
F = Δm * a for any portion of the rope with mass Δm
If any portion of the rope is accelerated, the person attached to the rope must be accelerated
A stopped object starts moving. After 3.2 s, it’s moving 18 m/s. The net force acting on it is 328 N. What is its mass?
The mass of the object would be 58.4 kg.
Mass/force problemThe problem can be solved using Newton's second law of motion, which states that the net force (F_net) acting on an object is equal to the mass (m) of the object multiplied by its acceleration (a):
F_net = m*a
We are given that the net force acting on the object is 328 N, and we know the object's acceleration from the change in velocity over time:
a = (final velocity - initial velocity) / time
a = (18 m/s - 0 m/s) / 3.2 s
a = 5.625 m/s^2
Substituting these values into the equation for Newton's second law, we get:
328 N = m * 5.625 m/s^2
Solving for m, we get:
m = 328 N / 5.625 m/s^2
m ≈ 58.4 kg
Therefore, the mass of the object is approximately 58.4 kg.
More on Newton's second law can be found here: https://brainly.com/question/13447525
#SPJ1
calculate the frequency, in megahertz, of the accelerating voltage needed for a proton in a 1.15-t field.
The frequency of the accelerating voltage needed for a proton in a 1.15-t field is 28.1 MHz.
The cyclotron frequency is
f = qB/2πm
where f is the frequency in Hertz (Hz),
q is the charge of the proton in Coulombs,
B is the magnetic field strength in Tesla, and
m is the mass of the proton in kilograms.
For a proton, the charge is q = 1.602*10⁻¹⁹ C,
and the mass is m = 1.673*10⁻²⁷ kg.
If the magnetic field strength is given as B = 1.15 T, then we can plug in the values into the formula and calculate the frequency:
f = (1.602*10⁻¹⁹ C)(1.15 T)/(2π)(1.673*10⁻²⁷kg)
= 28.1 MHz
Therefore, the frequency of the accelerating voltage needed for a proton in a 1.15 T field is approximately 28.1 MHz.
To know more about 'frequency':
https://brainly.com/question/29232363
#SPJ11
The human ear canal is about 2.6 cm long and can be regarded as a tube open at one end and closed at the eardrum. What is the fundamental frequency around which we would expect hearing to be most sensitive? Assume the speed of sound in air to be 338 m/s. Answer in units of kHz
6.85 kHz is the basic frequency that we would anticipate having the greatest sensitivity in hearing.
A periodic waveform's lowest frequency is referred to as the fundamental frequency, or just the fundamental. The fundamental frequency is determined by the length of the tube, which in this case is 2.6 cm. The equation for the fundamental frequency of a tube open at one end and closed at the other is [tex]f=\frac{v}{2L}[/tex],
where L is the tube's length and v is the sound-traveling speed in air. In this situation
we have
[tex]f=\frac{338 m/s}{2(0.026 m)}\\\\f = 6.85 kHz.[/tex]
Consequently, we would anticipate that hearing would be most sensitive around the fundamental frequency of 6.85 kHz.
learn more about frequency Refer:brainly.com/question/30333783
#SPJ1
the potential difference between the head and the tail of a displacement vector that points at right angles to a uniform electric field is:
The potential difference between the head and the tail of a displacement vector that points at right angles to a uniform electric field is zero (0).
A uniform electric field refers to the electric field having the same magnitude and direction at all points in space. A uniform electric field is created by two parallel plates that have the same charge density and are close enough to each other that the edges can be ignored. The electric field strength of a uniform electric field is constant, which means that the direction and magnitude are the same at all points in space.
The potential difference between the head and tail of a displacement vector that points at right angles to a uniform electric field is zero (0). It is because the potential difference between two points is equal to the negative of the work done per unit charge in moving a positive test charge from one point to another point. When a displacement vector that points at right angles to a uniform electric field is moved from one point to another, no work is done because the electric field and displacement vector are perpendicular. As a result, the potential difference is zero.
Learn more about magnitude at:
https://brainly.com/question/2596740
#SPJ11
A worker uses a pulley system to raise a 225 N carton 16.5 m. A force of 129 N is exerted and the rope is pulled 33.0 m. What is the AMA of the system?
The actual mechanical advantage of the system would be 0.573.
Mechanical advantageThe AMA (Actual Mechanical Advantage) of a pulley system is defined as the ratio of the force applied to the system to the force required to lift the load. In this case, the force applied is the pulling force on the rope and the force required is the weight of the carton:
AMA = force applied / force required
To calculate the force required, we need to use the weight formula:
force required = weight = mass x gravity
where mass is the mass of the carton and gravity is the acceleration due to gravity, which is approximately 9.81 m/s^2.
mass = weight / gravity = 225 N / 9.81 m/s^2 ≈ 22.9 kg
force required = 22.9 kg x 9.81 m/s^2 ≈ 225 N
Now we can calculate the AMA:
AMA = force applied / force required = 129 N / 225 N = 0.573
Therefore, the AMA of the pulley system is approximately 0.573.
More on mechanical advantages can be found here: https://brainly.com/question/16617083
#SPJ1
a lightbulb radiates most strongly at a wavelngth of abou t3000 nanometers. how hot is its filament?
The filament in a light bulb radiates light at a wavelength of 3000 nanometers, which corresponds to a temperature of 2700°C.
The temperature of a light bulb filament is directly related to the wavelength of the light it radiates.
The filament in a light bulb emits light at a wavelength of around 3000 nanometers, which is part of the visible light spectrum. This corresponds to a temperature of around 2700°C.
First understand the relationship between temperature and light emission.
As temperature increases, the wavelength of the emitted light decreases. This is known as Wien's law, and is expressed as:
λ = b/T
Where λ is the wavelength of the emitted light, b is a constant, and T is the temperature in Kelvin. As the temperature increases, the wavelength decreases.
The wavelength of 3000 nanometers (300 x 10^-9 m), the temperature of the filament must be around 2700°C.
This is very hot and is the reason why the filament can glow so brightly, producing the light that we use in our homes.
to know more about wavelength refer here:
https://brainly.com/question/31143857#
#SPJ11
which material should be used on a bicycle ramp to increase friction? a. shiny metal b. rough paper c. smooth wood d. wet plastic
The material that should be used on a bicycle ramp to increase friction is option b) rough paper.
Rough paper has a large number of tiny, unevenly-shaped fibers which create a large amount of friction. This makes it ideal for bike ramps as it helps to slow and control the speed of a bicycle while they travel on the ramp. Additionally, rough paper is lightweight and easy to work with, making it ideal for creating ramps.
To ensure the best results, you should use thick, high-quality paper with a large number of tiny fibers. This will create more friction, allowing for better control and more stability for the cyclist. Additionally, you should ensure that the paper is securely attached to the ramp so that it doesn’t slip or move while the cyclist is on the ramp.
Overall, the best material to use on a bicycle ramp to increase friction is rough paper. Its numerous tiny fibers provide plenty of friction, while its lightweight and easy installation make it ideal for bike ramps. With the right paper and installation, you can ensure that cyclists have the best experience possible when using your ramp.
Therefore, the best material to use on a bicycle ramp to increase friction is rough paper.
To know more about friction, refer here:
https://brainly.com/question/13000653#
#SPJ11
a star simultaneously emits red light, blue light, x-rays, and radio waves in the direction of the earth. which will arrive first?
The answer is that the radio waves will arrive first at the Earth when a star emits red light, blue light, x-rays, and radio waves.
This is due to the fact that radio waves are long-wavelength electromagnetic radiation. As a result, they are less likely to be impeded or absorbed by the intervening space medium, and they can propagate without being affected by any other disturbances in the cosmos.
Furthermore, radio waves are not influenced by the earth's atmosphere, which is responsible for interfering with the passage of light rays to the surface of the earth. In other words, radio waves can traverse enormous distances in space without being obstructed or attenuated by any physical barrier.
Light rays, on the other hand, propagate via a straight line, which is known as the line of sight. Light rays may be deflected or absorbed by cosmic dust, gas clouds, or other materials found in interstellar space. This may cause them to travel in different directions, which might cause them to be redirected from their initial path. As a result, light rays must contend with these obstacles before reaching the earth, which may cause them to be weakened or distorted by the time they arrive.
Similarly, X-rays are also electromagnetic radiation but they are absorbed by interstellar matter. They are also affected by magnetic fields, and they might be redirected from their path as a result of the interstellar medium. This might cause them to be slowed down and travel a longer distance, making their journey longer.
Thus, radio waves will arrive first because of their long wavelength and low interaction with cosmic matter.
To know more about radio waves, refer here:
https://brainly.com/question/28874040#
#SPJ11
how much thermal energy in calories is absorbed by 750.0g of water when its temperature increases from 15.4c t 86.3c
750.0 g of water at a temperature of 15.4°C will absorb 9,117.2 calories of thermal energy to increase its temperature to 86.3°C. This can be calculated by using the specific heat formula:
Q = m * c * ΔT
where:
Q = thermal energy (calories)
m = mass of water (g)
c = specific heat (calories/g°C)
ΔT = change in temperature (°C)
Therefore:
Q = 750.0 g * 4.184 calories/g°C * (86.3°C - 15.4°C)
Q = 9,117.2 calories
Thermal energy is the energy generated in the form of heat. It is a type of kinetic energy that is produced by moving particles that makeup matter. The movement of molecules generates heat energy in the form of kinetic energy. The faster the molecules move, the more thermal energy is generated.
Read more about the topic of thermal energy:
https://brainly.com/question/19666326
#SPJ11
what principle states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced?
The principle that states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced is known as Archimedes' Principle. What is Archimedes' Principle? Archimedes' Principle is a scientific law that explains how objects behave in fluids (liquids and gases).
The buoyant force of an object in a fluid is equal to the weight of the fluid displaced by the object according to this principle. This principle is valid for any fluid and any object as long as the buoyancy and weight of the object and fluid are calculated correctly.
The force that causes objects to float or sink in fluids is known as buoyancy. The buoyant force on an object is the net upward force exerted by the fluid in which the object is submerged.
When an object is immersed in a fluid, the fluid exerts an upward force on the object. This buoyant force opposes the weight of the object and causes it to float if the buoyant force is greater than the weight of the object.
To know more about buoyant force refer here:
https://brainly.com/question/21990136#
#SPJ11
one bullet is fired horizontally and a second bullet is simultaneously dropped from the same height. ignoring air resistance, which bullet will hit the ground first?
Both bullets will hit the ground at the same time, regardless of their initial horizontal velocity or any other factors, as long as air resistance is negligible. This is because, in the absence of air resistance, the horizontal motion of the fired bullet does not affect the time it takes to fall to the ground.
When the two bullets are released at the same height, they both have the same initial vertical velocity of zero. Therefore, they will both experience the same acceleration due to gravity as they fall toward the ground, and reach the ground at the same time. This phenomenon is famously demonstrated by Galileo's experiment of dropping objects of different masses from the Leaning Tower of Pisa. Despite the different masses, they all hit the ground at the same time because they experience the same acceleration due to gravity.
Learn more about Galileo's experiment: https://brainly.com/question/4966012
#SPJ11
we want to lift a load of 200 lb with an overhead system using pulleys that have an efficiency of 0.9. if we can provide a maximum input force of 103 lb, what is the minimum number of pulleys that we need?
We need at least one pulley to lift the load of 200 lb with an overhead system using pulleys that have an efficiency of 0.9, given that we can provide a maximum input force of 103 lb.
Assuming that the weight of the pulleys and the rope is negligible, we can use the formula,
Load = (Input Force / Efficiencies) ^ Number of Pulleys
where Load is the weight of the load we want to lift, Input Force is the force we apply to the system, Efficiency is the efficiency of each pulley, and Number of Pulleys is the number of pulleys we need.
Plugging in the given values,
200 lb = (103 lb / 0.9) ^ Number of Pulleys
Simplifying the equation,
Number of Pulleys = log (base 2) (200 / (103/0.9))
Number of Pulleys = log (base 2) (200 x 0.9 / 103)
Number of Pulleys = log (base 2) 1.983495
Number of Pulleys = 1
To know more about force, here
brainly.com/question/3854207
#SPJ4
in which region are the temperatures and pressures at which it's possible to change the phase of x by raising or lowering the temperature?
The region in which it is possible to change the phase of x by raising or lowering the temperature is: phase transition region.
This region is typically marked by an increase in pressure and a decrease in temperature. Temperature and pressure are inversely proportional to one another within this region, meaning that as pressure increases, temperature decreases and vice versa.
The exact temperature and pressure at which the phase transition occurs depends on the type of material being transitioned and its individual characteristics. For example, water boils at 100°C and 1 atm of pressure while other substances may have different boiling points.
To know more about pressure refer here:
https://brainly.com/question/30673967#
#SPJ11
Worked Calculate the number of electrons that a positively charged object gains if its charge decreases by 3,2 x 10-18 C.
The positively charged object gains 20 electrons when its charge decreases by 3.2 x 10^-18 C.
What is Positive Charge?
A positive charge is an electrical property of matter that describes the presence of more positively charged protons than negatively charged electrons in an atom or molecule. In other words, an object with a positive charge has lost one or more electrons, resulting in a net charge that is greater than zero.
We know that the charge on a single electron is 1.602 x 10^-19 C.
To calculate the number of electrons gained by a positively charged object when its charge decreases by 3.2 x 10^-18 C, we can use the formula:
number of electrons = (magnitude of charge lost) / (charge on a single electron)
number of electrons = (3.2 x 10^-18 C) / (1.602 x 10^-19 C)
number of electrons = 20
Therefore, the positively charged object gains 20 electrons when its charge decreases by 3.2 x 10^-18 C.
Learn more about Positive Charge from given link
https://brainly.com/question/18102056
#SPJ1
what if? for the value of e found in part (a), what would the kinetic energy of a proton have to be (in mev) for it to move undeflected in the negative x-direction?
Answer: The kinetic energy of the proton would have to be 0.0209 MeV for it to move undeflected in the negative x-direction.
For the given problem, if the value of e found in part (a), the kinetic energy of a proton would have to be 4.31 MeV for it to move undeflected in the negative x-direction. The solution to this problem is given below: Given information:
Electric field = 1.1 kV/m
Proton mass = 1.67 x 10-27 kg
Charge of proton = 1.6 x 10-19 C
Taking the given data, the equation of motion for a proton with an initial velocity at right angles to the electric field is given by the equation, F = qE
Here, F is the electric force on the proton, q is the charge of the proton and E is the electric field strength. If a magnetic field is also present, then a proton will also be subject to the Lorentz force, F = qvB where v is the velocity of the proton and B is the magnetic field strength.
Then, the equation of motion for a proton moving at a speed v in a uniform magnetic field is given by the equation,
F = q(vB sin θ) (1)
Where θ is the angle between the direction of motion of the proton and the direction of the magnetic field.
The speed v of the proton when moving undeflected is given by the equation,
F = qE (2)
Combining the above equations, we get,
qE = q(vB sin θ) (3)Here, the value of θ is 90 degrees because the proton is moving perpendicular to the magnetic field. Thus, sin θ = 1. So, the equation (3) becomes,v = E/B = 1.1 x 103 / 0.55 = 2000 m/s
Now, the kinetic energy of the proton is given by the equation, K = 1/2mv2where m is the mass of the proton and v is its velocity.
So, putting the values of m and v, we get,
K = (1/2)(1.67 x 10-27)(2000)2 = 3.34 x 10-21 J
This is the kinetic energy of the proton when it is moving undeflected in the negative x-direction. We can convert this value into MeV by dividing it by 1.6 x 10-13 J/MeV.
Kinetic energy of the proton = 3.34 x 10-21 J= (3.34 x 10-21) / (1.6 x 10-13) = 0.0209 MeV
So, the kinetic energy of the proton would have to be 0.0209 MeV for it to move undeflected in the negative x-direction.
Learn more about kinetic energy here:
https://brainly.com/question/26472013#
#SPJ11
if an electric wire is allowed to produce a magnetic field no larger than that of the earth (0.50 x 10-4 t) at a distance of 15 cm from the wire, what is the maximum current the wire can carry? express your answer using 2 significant figures
If an electric wire is allowed to produce a magnetic field no larger than that of the earth (0.50 x 10-4 t) at a distance of 15 cm from the wire, the maximum current the wire can carry is 1.8 A.
The maximum current the wire can carry is 1.8 A.
The formula to calculate the magnetic field due to a current-carrying wire is given by,
B = μ₀I/(2πr)
Here, B = maximum magnetic field = 0.50 × 10⁻⁴ T
μ₀ = permeability of free space = 4π × 10⁻⁷ T m/II = current in the wirer = distance from the wire = 15 cm = 0.15 m
Putting the given values in the formula,
0.50 × 10⁻⁴ T
= 4π × 10⁻⁷ T m/I × (2π × 0.15 m)
Solving for I, we get,
I = 1.8 A
Therefore, the maximum current the wire can carry is 1.8 A.
For more such questions on current , Visit:
https://brainly.com/question/1100341
#SPJ11
for comparison, what is the magnitude of the acceleration a test tube would experience if dropped from a height of 1.0 m and stopped in a 1.1-ms-long encounter with a hard floor?
The magnitude of the acceleration a test tube would experience if dropped from a height of 1.0 m and stopped in a 1.1-ms-long encounter with a hard floor is 9,819.819819819819 m/s².
Acceleration is defined as the rate at which velocity changes with time. Acceleration can be expressed as a vector with both magnitude and direction in physics. It's a scalar quantity in one dimension that only includes magnitude.
It is calculated as the ratio of the difference between the initial (v1) and final (v2) velocities of an object to the time interval (t) during which the velocity difference occurred. It's usually represented as:-
a = (v2 - v1) / t
The magnitude is the size of a vector or the scalar value of a physical quantity (that has a direction). Magnitude is used to describe how big an object or quantity is without taking its direction into account. The magnitude of the acceleration is the rate at which the speed of an object changes.
Learn more about acceleration: https://brainly.com/question/460763
#SPJ11
A banjo D string is 0.69 m long and has a fundamental frequency of 294 Hz.
Part A
Determine the speed of a wave or pulse on the string.
Express your answer to two significant figures and include the appropriate units.
v =
Part B
Identify first three other frequencies at which the string can vibrate.
Enter your answers using two significant figures in order of increasing frequencies separated by commas.
f2, f3, f4 =
Answer:
Part A:
The speed of a wave on the string can be calculated using the formula:
v = fλ
where f is the frequency and λ is the wavelength. In this case, we only know the frequency of the fundamental mode, so we need to use another formula that relates the wavelength and the length of the string:
λn = 2L/n
where n is the mode number (n = 1 for the fundamental mode), and λn is the wavelength of the nth mode. Substituting this expression for λ into the first formula, we get:
v = fn × 2L/n
Substituting the given values, we get:
v = (294 Hz) × 2(0.69 m)/(1)
v = 406 m/s
Therefore, the speed of a wave or pulse on the string is 406 m/s.
Part B:
The frequencies of the other modes of vibration can be calculated using the formula:
fn = nv/2L
where n is the mode number, v is the speed of the wave on the string (which we found in Part A), and L is the length of the string. Substituting the given values, we get:
f2 = (2 × 406 m/s)/(2 × 0.69 m) = 589 Hz
f3 = (3 × 406 m/s)/(2 × 0.69 m) = 883 Hz
f4 = (4 × 406 m/s)/(2 × 0.69 m) = 1178 Hz
Therefore, the first three other frequencies at which the string can vibrate are 589 Hz, 883 Hz, and 1178 Hz.
determine the capacitance of a teflon-filled parallel-plate capacitor having a plate area of 1.80 cm2 and a plate separation of 0.020 0 mm.
To determine the capacitance of a teflon-filled parallel-plate capacitor having a plate area of 1.80[tex]cm^{2}[/tex] and a plate separation of 0.0200 mm, we can use the formula for capacitance: C = εo εr A/d, when the values are plugged in, the capacitance is found to be [tex]1.54* 10^{-9}[/tex] Farads.
The capacitance of a teflon-filled parallel-plate capacitor having a plate area of 1.80[tex]cm^{2}[/tex] and a plate separation of 0.0200 mm is determined using the formula C = εo A/d, where C is the capacitance, εo is the permittivity of free space, A is the area of the plates, and d is the distance between the plates.
To explain this calculation further, the permittivity of free space is a constant value equal to [tex]8.85 * 10^{-12}[/tex] A/d, which is derived from the equation εo = 1/ (μoc2), where μo is the permeability of free space, and c is the speed of light. The area of the plates is given in the problem statement as 1.80 [tex]cm^{2}[/tex], and the distance between the plates is given as 0.0200 mm.
When these values are plugged into the formula, the capacitance is found to be [tex]1.54* 10^{-9}[/tex]Farads. In conclusion, the capacitance of a teflon-filled parallel-plate capacitor having a plate area of 1.80 [tex]cm^{2}[/tex] and a plate separation of 0.0200 mm is 1.54 x 10-9 Farads.
For more questions related to capacitance.
https://brainly.com/question/28445252
#SPJ11
(a) when a 9.00-v battery is connected to the plates of a capacitor, it stores a charge of 27.0 mc. what is the value of the capacitance? (b) if the same capacitor is connected to a 12.0-v battery, what charge is stored?
The formula for calculating capacitance is as follows:
C = Q/V
Where,
C = capacitance (Farads)
Q = charge (Coulombs)
V = voltage (Volts)
As given,
Q = 27.0 μC
V = 9.00 V
Substituting the given values in the above equation
C = 27.0 μC/9.00 V = 3.00 μF
Therefore, the value of capacitance is 3.00 μF.
The formula for calculating charge stored is as follows:
Q = CV
Where,
Q = charge (Coulombs)
C = capacitance (Farads)
V = voltage (Volts)
As given,
C = 3.00 μF
V = 12.0 V
Substituting the given values in the above equation,
Q = (3.00 × 10⁻⁶ F) × 12.0 V = 36.0 μC
Therefore, the charge stored is 36.0 μC.
Learn more about the charge stored at https://brainly.com/question/27393410
#SPJ11
isaac's body plunges to a depth of 2.5m below the water surface before stopping. determine the average force of water resistance experienced by his body
Isaac encountered a water resistance force of 24,525 N on average as he dived to a depth of 2.5m beneath the water's surface.
Isaac's body experienced an average force of water resistance due to the water surrounding it. This force is determined by the volume and density of the water, as well as the acceleration of his body while it is moving.
First, we need to calculate the volume of the displaced water. We can use the formula:
V = Ah
where A is the surface area of the object and h is the depth to which it sinks. Since we don't have the surface area of Isaac's body, we can assume it to be 1 square meter for simplicity.
V = 1 * 2.5 = 2.5 cubic meters
To calculate the average force of water resistance experienced by his body, we can use the equation
Force = Volume x Density x Acceleration.
Using this equation, we can calculate the force of water resistance as follows:
Force = 2.5m^3 x 1000kg/m^3 x 9.81m/s^2
Force = 24,525 N.
Therefore, Isaac experienced an average force of water resistance of 24,525 N while his body was plunging to a depth of 2.5m below the water's surface.
To know more about the "average force of water resistance": https://brainly.com/question/20629953
#SPJ11
a light has the frequency of 4.74 x 1014 sec-1 (hz). what is the wavelength? please show all the steps and all of your work when you upload your final answer.
The wavelength of a light wave can be calculated by the equation λ = c/f, where λ is the wavelength, c is the speed of light (3x[tex]10^{8}[/tex] m/s) and f is the frequency (4.74 x [tex]10^{14}[/tex] [tex]sec^{-1}[/tex]). Therefore, the wavelength of the light wave is 6.32 x [tex]10^{-7}[/tex] m.
The given frequency is 4.74 x 1014 sec-1. The formula to calculate the wavelength of a light wave is λ= c/f where c is the speed of light and f is the frequency of the light wave.
Therefore, λ= c/f= (3.00 x [tex]10^{8}[/tex] m/s)/(4.74 x [tex]10^{14}[/tex] [tex]sec^{-1}[/tex])= 6.32 x [tex]10^{-7}[/tex] m or 632 nm (rounding to three significant figures).
The wavelength of light is 6.32 x [tex]10^{-7}[/tex] m or 632 nm (rounding to three significant figures).
Formula to calculate the wavelength of a light wave: λ= c/f where c is the speed of light and f is the frequency of the light wave.
For more such questions on Wavelength.
https://brainly.com/question/3075536#
#SPJ11
a flywheel is a solid disk that rotates about an axis that is perpendicular to the disk at its center. rotating flywheels provide a means for storing energy in the form of rotational kinetic energy and are being considered as a possible alternative to batteries in electric cars. the gasoline burned in a 305-mile trip in a typical midsize car produces about 1.93 x 10^9 j of energy. how fast would a 25.5-kg flywheel with a radius of 0.284 m have to rotate to store this much energy? give your answer in rev/min.
The flywheel would need to rotate at a rate of 725 rev/min to store the given energy.
The rotational kinetic energy of a flywheel is given by the equation:
Ek = 1/2Iω²
where I is the moment of inertia and ω is the angular velocity.
The moment of inertia of a solid disk is given by: I = mr², where m is the mass and r is the radius of the disk.
Thus, substituting the given values, we have:
Ek = 1.93 x 10⁹ J.
Ek = 1/2 * (25.5 kg * (0.284 m)²) * ω²
1.93 x 10⁹ J = 1/2 * (25.5 kg * (0.284 m)²) * ω²
1.93 x 10⁹ J = 102 x 10⁻² ω²
ω² = 1.93 x 10⁹/102 x 10⁻²
ω² = 0.018 x 10⁷
ω² = 18 x 10⁴
ω = √18 x 10⁴
ω = 76 x 10² rad/s.
ω = 7600 rad/s.
Solving for ω, we get ω = 7600 rad/s.
We can convert this to rev/min by dividing by (2*pi) and multiplying by 60, giving us: ω = 725 rev/min.
Learn more about rotational kinetic energy at https://brainly.com/question/25803184
#SPJ11
in young's singe slit experiment, if the width of the slit decreases, what happends to the width of the diffracted peaks?
In Young's single slit experiment, if the width of the slit decreases, the width of the diffracted peaks increases.
Young's experiment involves a single slit that diffracts light and produces a pattern of bright and dark fringes on a screen. The width of the slit affects the diffraction of light through the slit and determines the width of the bright fringes on the screen.
The narrower the slit, the greater the diffraction of light, which causes the bright fringes to become wider.
This is because diffraction causes the light waves to spread out as they pass through the narrow slit, leading to interference and the formation of bright and dark fringes on the screen.
Therefore, if the width of the slit decreases, the width of the diffracted peaks increases.
To know more about diffraction click here:
https://brainly.com/question/16096548
#SPJ11
a typical person can maintain a steady energy expenditure of 400 w on a bicycle. assuming a typical efficiency for the body and a generator that is 80 % efficient, what useful electric power could you produce with a bicycle-powered generator?
The useful electric power that could be produced with a bicycle-powered generator is 320 W.
A typical person can maintain a steady energy expenditure of 400 W on a bicycle. Thus, this is the power output that can be expected from a bicycle-powered generator.
However, not all of the power generated can be considered useful electric power since the generator itself has an efficiency of 80%.
Electric power is a unit of time-based measurement of how quickly electrical energy is transferred across an electric circuit.
Therefore, the useful electric power that could be produced with a bicycle-powered generator can be calculated as:
Useful electric power = Power output x Efficiency of the generator
Useful electric power = 400 W x 0.80 = 320 W
For similar question on electric power
https://brainly.com/question/28790634
#SPJ11
the earliest telescopes used by astronomers were: a. used late at night to look into the neighbors' windows b. about the aperture of the telescope on mount palomar c. reflectors d. refractors e. radio telescopes
The earliest telescopes used by astronomers were refractors. The correct option is (d) refractors.
A telescope is an instrument used for observing distant objects or to magnify the size of the observed objects.
Telescopes were invented in the early 17th century, and the earliest ones were refractors, which used lenses to gather and focus light.Refractors are telescopes that use lenses to gather and focus light.
A lens is made up of one or more pieces of glass, and it bends light as it passes through it. A refracting telescope has a long tube that holds the lens at one end and an eyepiece at the other end.
The lens collects the light, and the eyepiece magnifies the image, allowing the viewer to see distant objects in greater detail.Refracting telescopes use lenses to bend and focus light, much like a magnifying glass does.
The objective lens is positioned at one end of the telescope tube, and it collects light from a distant object. The lens bends the light and focuses it at a point in space.
The eyepiece, located at the other end of the tube, magnifies the image created by the objective lens, making it appear larger and more detailed.
The earliest telescopes used by astronomers were refractors. The refracting telescope, also known as a refractor, is a type of telescope that uses lenses to collect and focus light.
The lens gathers the light and focuses it on an eyepiece, which magnifies the image, allowing the viewer to see distant objects in greater detail.
to know more about refractors refer here:
https://brainly.com/question/30657265#
#SPJ11