The theoretical yield of water formed from the reaction of 34.3 g of hydrochloric acid and 72.6 g of sodium hydroxide is 16.9 g.
The balanced chemical equation of the reaction can be written as follows:
HCl + NaOH → NaCl + H₂O
The reactants, hydrochloric acid (HCl) and sodium hydroxide (NaOH), are combined in a 1:1 mole ratio. This means that for every mole of HCl, one mole of NaOH is necessary to produce one mole of water and one mole of sodium chloride.
The molar mass of HCl and NaOH is 36.5 g/mol and 40.0 g/mol, respectively. Dividing their mass with their respective molar mass, we will have the number of moles of each reactant.
moles HCl = 34.3 g / 36.5 g/mol = 0.94 mol
moles NaOH = 72.6 g / 40.0 g/mol = 1.815 mol
Therefore, 34.3 g of HCl is equivalent to 0.94 moles, and 72.6 g of NaOH is equivalent to 1.82 moles.
Since these are in a 1:1 mole ratio, this reaction should produce 0.94 moles of water. The molar mass of water is 18.0 g/mol, and thus the theoretical yield of water produced is:
mass = moles x molar mass = 0.94 mol x 18 g/mol = 16.9 g.
Learn more about theoretical yield here: https://brainly.com/question/25996347.
#SPJ11
At this point, you should have some idea of how a strong base behaves in solution once it dissolves. Choose all that apply as they relate to a strong base.
Conjugates of strong bases are ions from group 1 and 2 of the periodic table
A strong base dissociates partially in solution to produce its conjugate
The conjugate of a strong base is basic in solution
Conjugates of strong bases are ions from the transition metals in the periodic table
A strong base dissociates completely in solution to produce its conjugate
The conjugate of a strong base is neutral in pH when in solution
Conjugates of strong bases are ions from groups 1 and 2 of the periodic table. The conjugate of a strong base is basic in solution.
A strong base dissociates completely in solution to produce its conjugate.
A strong base is a substance that completely dissociates in water to produce hydroxide ions (OH⁻). Since it completely dissociates, it does not have any remaining undissociated molecules or ions in the solution. Therefore, the conjugate of a strong base is simply the ion that is left over after the base dissociates, which is always a simple metal cation (from group 1 or 2 of the periodic table) and a hydroxide ion (OH⁻).
For example, sodium hydroxide (NaOH) is a strong base that dissociates completely in water to produce sodium ions (Na⁺) and hydroxide ions (OH⁻). The conjugate of NaOH is simply the sodium ion (Na⁺), which is a simple metal cation from group 1 of the periodic table.
The conjugate of a strong base is basic in solution because it is capable of accepting a proton (H⁺) from a water molecule to reform the original strong base. This is because the conjugate base has a pair of unshared electrons on the hydroxide ion that can accept a proton from water. Therefore, the conjugate base acts as a weak acid in the solution.
To learn more about conjugates please visit
https://brainly.com/question/29753209
#SPJ1
calculate the equilibrium potential of a copper wire immersed in 0.0007 m cuso4 solution. the standard electrode potential for the reaction cu2 2e-
The equilibrium potential of a copper wire immersed in 0.0007 M CuSO₄ is 1.191 V.
To calculate the equilibrium potential of a copper wire immersed in 0.0007 M CuSO₄ solution, we need to use the Nernst equation. The Nernst equation is:
E = E° - (RT/nF) * ln(Q)
Where E is the equilibrium potential (in volts), E° is the standard electrode potential, R is the gas constant (8.314 J K-1 mol-1), T is the temperature (in Kelvin), n is the number of electrons transferred (2 in this case), F is Faraday’s constant (96485 C mol-1), and Q is the reaction quotient.
In this case, E° = 0.34 V, T = 298 K, n = 2, F = 96485 C mol-1, and Q = 0.0007 M CuSO4. Therefore, the equilibrium potential of the copper wire is:
E = 0.34 V - (8.314 J K-1 mol-1 * 298 K / (2 * 96485 C mol-1)) * ln(0.0007 M CuSO4)
E = 0.34 V - (-0.851 V)
E = 1.191 V
Therefore, the equilibrium potential of the copper wire immersed in 0.0007 M CuSO₄ solution at 25°C is 1.191 V.
Complete question:
Calculate the equilibrium potential of a copper wire immersed in 0.0007 M CuSO4 solution. The standard electrode potential for the reaction Cu2+ + 2e- = Cu0 at 25°C is 0.34 V (NHE).
Learn more about equilibrium potential at https://brainly.com/question/28304088
#SPJ11
76.33 grams of NaCl were collected after experiment. How many moles were
produced?
76.33 grams of NaCl were collected after experiment 1.306 mol were
produced.
What is mole formula?Every material has a molecular weight of 6.023 x 10²³. It may be used to quantify the chemical reaction's byproducts. The symbol mol is used to identify the unit. The molecular formula is written out as follows.
Mass of material / mass of one mole equals the number of moles.
We need to know the molar mass of NaCl in order to compute the number of moles of NaCl created.
The atomic weights of sodium (Na) and chlorine together make up the molar mass of sodium chloride (Cl). Na has an atomic mass of 22.99 g/mol, while Cl has an atomic mass of 35.45 g/mol. As a result, NaCl's molar mass is:
Molar mass of NaCl
= (1 x atomic mass of Na) + (1 x atomic mass of Cl)
= (1 × 35.45 g/mol plus 1 x 22.99 g/mol)
= 58.44 g/mol
The mass of gathered NaCl may now be converted into moles using the molar mass:
Mass of NaCl divided by its molar mass yields moles of NaCl.
moles of NaCl = 76.33 g / 58.44 g/mol
moles of NaCl = 1.306 mol
As a result, the experiment generated 1.306 moles of NaCl.
To know more about Moles visit:
https://brainly.com/question/21323029
#SPJ1
Which of the following best describes a star? A star is a celestial body -
composed of rock and metal with a very high density.
that is too big to be an asteroid, but too small to be a planet.
that rotates on an axis and revolves around the Sun composed of gases
that emit light due to nuclear reactions.
The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."
Stars are massive, luminous spheres of plasma held together by their own gravity. They are not composed of rock and metal with a high density, nor are they too big to be an asteroid but too small to be a planet. Stars do rotate on an axis and revolve around a central point, but their defining characteristic is their ability to emit light and heat through the process of nuclear fusion.
What is celestial body?
A celestial body is any object that exists in space, such as a planet, moon, asteroid, comet, star, or galaxy. Celestial bodies are natural objects that are not made by humans, and they are typically studied by astronomers and other scientists who are interested in learning more about the structure, composition, and behavior of the universe. Celestial bodies can be located within our solar system or in distant regions of space, and they can range in size from tiny rocks to massive stars and superclusters of galaxies.
To know more about celestial body, visit:
https://brainly.com/question/28876984
#SPJ1
Complete question is: The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."
calculate the volume of 0.200m naoh (in ml) needed to completely react with 50.00 ml of 0.0500m ch3cooh.
The volume 0.200 M NaOH (in mL) needed to completely react with 50.00 mL of 0.0500 M CH₃COOH is 12.5 mL
How do i determine the volume of NaOH needed?The volume of NaOH needed can be obtained as shown below:
The balanced equation is given as follow:
CH₃COOH + NaOH -> CH₃COONa + H₂O
The mole ratio of the acid, CH₃COOH (nA) = 1The mole ratio of the base, NaOH (nB) = 1Concentration of base, NaOH (Cb) = 0.200 MVolume of acid, CH₃COOH (Va) = 50.00 mL Concentration of acid, CH₃COOH (Ca) = 0.0500 MVolume of base, NaOH (Vb) =?CaVa / CbVb = nA / nB
(0.05 × 50) / (0.2 × Vb) = 1
2.5 / (0.2 × Vb) = 1
Cross multiply
1 × 0.2 × Vb = 2.5
0.2 × Vb = 2.5
Divide both side by 0.2
Vb = 2.5 / 0.2
Vb = 12.5 mL
Thus, the volume of NaOH needed is 12.5 mL
Learn more about volume:
https://brainly.com/question/19053582
#SPJ1
how much heat energy is required to melt 649.2 g of hbr ? the molar heat of fusion of hbr is 2.41 kj/mol
Answer: The amount of heat energy required to melt 649.2 g of HBr is 12.99 kJ, given that the molar heat of fusion of HBr is 2.41 kJ/mol.
Molar heat of fusion is the amount of heat required to melt one mole of a substance. The molar heat of fusion for HBr is 2.41 kJ/mol.
To find the amount of heat energy required to melt 649.2 g of HBr, the following steps should be followed:
Step 1: Determine the number of moles of HBr in 649.2 g of HBr:mass of HBr = 649.2 gMolar mass of HBr = 80.91 g/molNumber of moles of HBr = mass/molar mass= 649.2 g/80.91 g/mol= 8.01 mol
Step 2: Calculate the amount of heat required to melt 1 mol of HBr:Given molar heat of fusion of HBr is 2.41 kJ/molHeat required to melt 1 mol of HBr = 2.41 kJ/mol
Step 3: Calculate the amount of heat required to melt 8.01 mol of HBr:Heat required to melt 8.01 mol of HBr = Heat required to melt 1 mol of HBr × Number of moles of HBrHeat required to melt 8.01 mol of HBr = 2.41 kJ/mol × 8.01 molHeat required to melt 8.01 mol of HBr = 19.301 kJ
Step 4: Convert the heat in kJ to J by multiplying it with 1000: Heat required to melt 8.01 mol of HBr = 19.301 kJ = 19,301J. Finally, we get the result: The amount of heat energy required to melt 649.2 g of HBr is 12.99 kJ.
Learn more about molar heat here:
https://brainly.com/question/29401184#
#SPJ11
once you have extracted caffeine, how will you confirm that it is caffeine? how will you test the purity of your caffeine? select three techniques to characterize your substance and describe what information each technique can provide you.
To recognize and test the purity of caffine , the tests which could be performed are melting point determination, UV-visible spectroscopy, and high-performance liquid chromatography (HPLC).
In order to identify that the given substance is caffeine, you can use several analytical techniques. Here are three techniques to characterize caffeine and their applications:
Melting Point Determination:
It is a physical method which is used in order to determine the purity of a substance. The melting point of caffeine is in the range of 235-238 °C. Hence, by measuring the melting point of the extracted caffeine and comparing it with the expected value of pure caffine, you can confirm that the substance you have extracted is caffeine.
UV-Visible Spectroscopy:
UV-Visible spectroscopy can be used to identify caffeine by analyzing the absorption of UV light by the molecule. Caffeine has a characteristic absorption peak at 273 nm. By measuring the UV spectrum of the extracted caffeine and comparing it to the literature value, you can confirm the presence of caffeine.
High-Performance Liquid Chromatography (HPLC):
It is a widely used technique for the separation, identification, and quantification of substances. By using this technique, you can separate and quantify the different components of the extracted caffeine, including its impurities. By comparing the range of melting point of the caffeine to the peak areas of known standards, you can calculate the purity of your extracted caffeine.
Therefore it can be said that the melting point determination, UV-Visible spectroscopy, and High-Performance Liquid Chromatography are three analytical techniques that can be used to confirm the identity and purity of extracted caffeine.
Learn more about caffine :
https://brainly.com/question/24482629
#SPJ4
what type of inter-molecular force arises from instantaneous dipole moments?
a. hydrogen bonding
b. dipole-dipole bond c. ion-dipole interactions d. ion-induce dipoles e. London Dispersion Forces
The type of intermolecular force that arises from instantaneous dipole moments is e. London Dispersion Forces. These forces occur due to temporary fluctuations in electron distribution, which create temporary dipoles that attract other nearby molecules.
London dispersion forces, also known as van der Waals forces, are the weakest type of intermolecular force. They arise from the fluctuations in the electron density in atoms and molecules.
When electrons are moving, they create temporary dipoles or instantaneous dipoles. These temporary dipoles attract each other and create an attractive force between the molecules, which is the London Dispersion Force. The strength of this force increases with the number of electrons in the molecule.
For more question on intermolecular force click on
https://brainly.com/question/13588164
#SPJ11
find the pka of an acid which has an initial concentration of 1.497 m for the acid and an equilibrium ph of 2.546.
Answer:
From the equilibrium pH, we can find the concentration of H+ ions in solution using the relation:
[H+] = 10^(-pH)
[H+] = 10^(-2.546) = 2.177 × 10^(-3) M
Now we can use the fact that the acid is a weak acid and only partially dissociates to form H+ ions and its conjugate base. Therefore, we can assume that [HA] at equilibrium is equal to the initial concentration of the acid minus the concentration of H+ ions that were produced from the dissociation of the acid.
[HA] at equilibrium = initial concentration of acid - [H+]
[HA] at equilibrium = 1.497 M - 2.177 × 10^(-3) M
[HA] at equilibrium = 1.497 M (since the concentration of H+ ions is negligible compared to the initial concentration of the acid)
Now we can plug in the values we obtained into the Henderson-Hasselbalch equation:
2.546 = pKa + log([A-]/[HA])
2.546 = pKa + log(0/[HA])
2.546 = pKa - log([HA])
log([HA]) = pKa - 2.546
[HA] = 10^(pKa - 2.546)
Since we assumed that the concentration of the conjugate base at equilibrium is negligible, we can assume that [A-] ≈ 0.
Therefore, we have:
pKa = log([HA]/0) + 2.546
pKa = log([HA]) + 2.546
pKa = log(1.497) + 2.546
pKa = 0.174 + 2.546
pKa = 2.72
Therefore, the pKa of the acid is approximately 2.72.
A face-centered cubic unit cell is the repeating unit in which type of crystal packing:__________
A face-centered cubic unit cell is the repeating unit in which type of crystal packing: cubic closest-packed, option B.
Solids can be thought of as having a structure similar to that of a piece of wallpaper in three dimensions. Wallpaper has a recurring pattern that is consistent and runs from edge to edge. Similar repeating patterns may be found in crystals, however in this case, the patterns span three dimensions from one edge of the solid to the other.
By describing the dimensions, form, and content of the most basic repeating unit in the pattern, we may accurately describe a piece of wallpaper. The smallest repeating unit's dimensions, composition, and arrangement on top of one another to form the crystal may be used to characterise a three-dimensional crystal.
Learn more about Unit cell;
https://brainly.com/question/12977980
#SPJ4
Complete question:
A face-centered cubic unit cell is the repeating unit in which type of crystal packing A) hexagonal close-packing B)cubic close-packed C)body centered D)simple E)all of the above
in an equilibrium mixture at 500k, the partial pressure of pcl 5 is 0.860 atm, pcl 3 is 0.350 atm, and cl 2 is 1.22 atm. calculate the equilibrium constant (k p ) for this reaction.
0.493 is the equilibrium constant (k p ) for [tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g) reaction at 500k.
The reaction is given as
[tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g)
At 500 K, the partial pressure of [tex]PCl_5[/tex] is 0.860 atm, [tex]PCl_3[/tex] is 0.350 atm, and [tex]Cl_2[/tex] is 1.22 atm.
To calculate the equilibrium constant ([tex]K_P[/tex]) for this reaction, we need to use the equation
[tex]K_P[/tex] = [[tex]PCl_3[/tex]] [[tex]Cl_2[/tex]] / [[tex]PCl_5[/tex]]
Here, [[tex]PCl_5[/tex]] = 0.860 atm
[[tex]PCl_3[/tex]] = 0.350 atm
[[tex]Cl_2[/tex]] = 1.22 atm
Substituting these values, we get
[tex]K_P[/tex] = (0.350)(1.22) / 0.860
[tex]K_P[/tex] = 0.493
Therefore, the equilibrium constant ([tex]K_P[/tex]) for this reaction at 500 K is 0.493.
Learn more about equilibrium constant: https://brainly.com/question/19340344
#SPJ11
Net ionic equation of evolved gas through lime water
Answer: 15.0667
Explanation:
if 4.36 mol of potassium phosphate react, how many grams of barium phosphate are produced?
If 39.5 g AlCl3 is produced, how many grams of HCl was used in the reaction?
PLEASE HELP DUE IN 20 MINS!!!! ;(
Answer: 64.1 grams of HCl were used in the reaction
what physical process is primarily responsible for the purification achieved during recrystallization?
The physical process that is primarily responsible for the purification achieved during recrystallization is the process of selective solubility.
The process of selective solubility refers to the ability of a substance to selectively dissolve in a particular solvent or a combination of solvents. The substance that is more soluble in a solvent will dissolve in that solvent while the impurities that are less soluble will remain undissolved.
The process of recrystallization is used to purify a solid that contains impurities. In this process, a solid is dissolved in a solvent that is heated to the boiling point. Once the solution is saturated, it is cooled slowly, and crystals are allowed to form. During recrystallization, the impurities are excluded from the growing crystals because of their lower solubility in the solvent, and the crystals that form are pure.
Therefore, the process of selective solubility is primarily responsible for the purification achieved during recrystallization.
Learn more about selective solubility here: https://brainly.com/question/13198024.
#SPJ11
quizler which toxic substance is responsible for the symptoms of flushing syndrome? group of answer choices alcohol dehydrogenase acetaldehyde acetaldehyde dehydrogenase acetate
The toxic substance that is responsible for the symptoms of the flushing syndrome is acetaldehyde.
Flushing syndrome is also known as alcohol flush reaction (AFR). It is a condition that occurs after alcohol consumption. It is a genetic predisposition that results in the body's inability to metabolize and break down acetaldehyde efficiently.
Acetaldehyde is produced when alcohol is metabolized by the liver. Flushing syndrome symptoms include facial flushing, rapid heartbeat, nausea, vomiting, abdominal pain, headache, dizziness, light-headedness, sweating and redness of the skin.
Acetaldehyde is a toxic substance that is responsible for the symptoms of the flushing syndrome. The toxic substance is produced when alcohol is broken down by alcohol dehydrogenase in the liver.
Acetaldehyde is then broken down into acetate by the enzyme acetaldehyde dehydrogenase. However, if acetaldehyde is not metabolized efficiently, it can cause the flushing syndrome.
Thus, the flushing syndrome occurs when there is an accumulation of acetaldehyde in the bloodstream.
Learn more about acetaldehyde: https://brainly.com/question/28945966
#SPJ11
if any of the solutions in this experiment are spilled on skin or clothing, what is the first thing to do?
If any of the solutions in this experiment are spilled on skin or clothing, the first thing to do is to remove any contaminated clothing immediately.
If the skin has been exposed to the solution, it is important to rinse the affected area with water for 15-20 minutes.
After rinsing, the skin should be dried with a clean towel and monitored for any signs of irritation or discoloration.
If any signs of irritation or discoloration occur, seek medical attention immediately. It is also important to report the incident to a teacher or safety officer and discard any contaminated clothing or material.
to know more about contamination refer here
https://brainly.com/question/24324754#
#SPJ11
compare a rigid container such as a glass bottle with a flexible container, such as an air bag. describe how the type of container affects how the preassure of the gas inside the container can vary.
A rigid container like a glass bottle cannot change shape, so pressure changes inside it can cause it to rupture. In contrast, a flexible container like an airbag can change shape and accommodate pressure changes without rupturing.
A rigid container, such as a glass bottle, is not capable of changing its shape when the pressure of the gas inside changes. This means that as the temperature of the gas increases, its pressure will also increase, causing the walls of the container to be subjected to an increased force. If the pressure of the gas inside the container continues to rise, the container may rupture or explode.
On the other hand, a flexible container, such as an airbag, is capable of expanding and contracting as the pressure of the gas inside changes. This is because the walls of the container are made of flexible material, such as nylon or polyester. When the pressure of the gas inside the container increases, the walls of the container will expand to accommodate the extra volume. If the pressure of the gas decreases, the walls of the container will contract, reducing the volume of the container.
To know more about the pressure, visit:
https://brainly.com/question/12497098
#SPJ1
Atmospheric pressure on the peak of Mt. Everest can be as low as 150 mm Hg, which is why climbers
need to bring oxygen tanks for the last part of the climb. If the climbers carry 10.0 liter tanks with an
internal gas pressure of 3.04 x 10¹ mm Hg, what will be the volume of the gas when it is released from the
tanks?
Answer: The volume of gas released from the tank at the peak of Mt. Everest is 37.83 liters.
Explanation: To solve this problem, we can use the general gas law equation:
PV = nRT
where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature (in Kelvin).
We can rearrange this equation to solve for volume:
V = nRT/P
We are given the internal gas pressure of the tank (P) and the volume of the tank (10.0 L). We need to find the volume of gas released from the tank (V). We also know that the temperature and number of moles of gas are constant (assuming no leaks or temperature changes during the climb).
To find the volume of gas released at the peak of Mt. Everest (150 mm Hg), we can use the following steps:
Convert the internal gas pressure of the tank to atm:
3.04 x 10¹ mm Hg x (1 atm / 760 mm Hg) = 0.004 atm
Convert the peak pressure to atm:
150 mm Hg x (1 atm / 760 mm Hg) = 0.197 atm
Plug in the known values to the equation:
V = nRT/P
V = nRT / (0.197 atm)
Solve for V:
V = (nRT) / (0.197 atm)
We can assume that the number of moles of gas, n, and the temperature, T, are constant. R is also a constant (0.08206 L atm / mol K).
So we can simplify the equation to:
V = constant / P
V = k / 0.197
where k is a constant. We can solve for k by using the initial conditions:
10.0 L = k / 0.004
k = 0.04 L atm
Now we can use this value of k to find the volume of gas released at the peak of Mt. Everest:
V = k / 0.197
V = 0.04 L atm / 0.197
V = 0.203 L
But this is the volume of gas at standard conditions (0°C and 1 atm). We need to correct for the temperature and pressure at the peak. To do this, we can use the following equation:
(P1 V1) / (n1 T1) = (P2 V2) / (n2 T2)
where the subscripts 1 and 2 refer to the initial and final states of the gas.
We can assume that n and V are constant, so this equation simplifies to:
P1 / T1 = P2 / T2
We can solve for T2:
T2 = (P2 T1) / P1
T1 is the initial temperature of the gas (room temperature, about 20°C or 293 K). P1 is the initial pressure of the gas (0.004 atm). P2 is the final pressure of the gas (0.197 atm).
T2 = (0.197 atm x 293 K) / 0.004 atm
T2 = 14,502 K
This temperature is obviously not physically realistic, but it shows that the volume of gas is greatly affected by the low pressure and temperature at the peak of Mt. Everest. To correct for this, we can assume that the gas behaves ideally and use the ideal gas law equation:
PV = nRT
We can solve for V:
V = (P2 V1 T1) / (P1 T2)
V = (0.197 atm x 10.0 L x 293 K) / (0.004 atm x 14,502 K)
V = 37.83 L
So the volume of gas released from the tank at the peak of Mt. Everest is about 38 liters.
Hope this helps, and have a great day!
Valdez notices that a wooden door in his house is difficult to open in the summer, but not in the winter. Valdez explains to Tony that the temperature of the door changes throughout the year. Tony says there is no way to measure the temperature of a solid because solids do not have a lot of thermal expansion. Valdez disagrees. Develop an argument supporting or opposing Tony's claim. Support your argument with at least two pieces of evidence.
I would argue against Tony's claim that the temperature of a solid cannot be measured, just because solids do not have a lot of thermal expansion.
What is thermal expansion?Thermal expansion is the tendency of materials to change in size, shape, or volume in response to changes in temperature.
There are several ways to measure the temperature of solids. One common method is to use a thermometer, which can be inserted into the solid to measure its temperature. Another method is to use an infrared thermometer, which measures the temperature of a solid by detecting the amount of infrared radiation it emits.
Second, while it is true that solids have a lower coefficient of thermal expansion than liquids or gases, they still expand and contract with changes in temperature. This is evident in Valdez's example of the wooden door, which becomes difficult to open in the summer when the temperature is higher, and easier to open in the winter when the temperature is lower. This change in the size of the door is due to thermal expansion and contraction of the wood.
To find out more about thermal expansion, visit:
https://brainly.com/question/30242448
#SPJ1
what is the pressure in a 22.0- l cylinder filled with 41.1 g of oxygen gas at a temperature of 331 k ?
The pressure in a 22.0 L cylinder filled with 41.1 g of oxygen gas at a temperature of 331 K is 1.58 atm.
We have,
The volume of the cylinder (V) = 22.0 L
Oxygen gas (O2) = 41.1 g
Temperature (T) = 331 K
We need to find the pressure (P) of oxygen gas in the cylinder.
P = (nRT) / V
Where,
R = 0.0821 L atm K−1mol−1
n = 41.1 g / 32 g/mol (O2 has a molar mass of 32 g/mol)
n = 1.284 mol
P = (1.284 mol × 0.0821 L atm K−1mol−1 × 331 K) / 22.0 L= 123.8 atm
Therefore, the pressure is 1.58 atm.
Thus, we can use the Ideal Gas Law ( PV=nRT) to find the pressure. It relates the pressure, volume, amount of gas, and temperature of a gas:
pv=nRT
To learn more about pressure refer - https://brainly.com/question/30984508
#SPJ11
Which option best describes the outer shell of the atoms inGroup 17 on this illustration of the Periodic Table?O They have 7 protons.OThey have 17 protons.OThey have 7 electrons.OThey have 17 electrons.
The option that best describes the outer shell of the atoms in Group 17 on the illustration of the Periodic Table is "They have 7 electrons."Group 17, also known as the Halogens, is a group of nonmetals that have seven valence electrons. The outermost shell of these atoms contains seven electrons, making them highly reactive. These elements readily
react with metals to form salts.There are seven elements in Group 17: fluorine, chlorine, bromine, iodine, astatine, tennessine, and oganesson. All of these elements have seven valence electrons, which is why they are classified
together in the same group of the periodic table. They all have similar properties, such as high electronegativity, reactivity, and the ability to form ionic compounds. Thus, the statement that "They have 7 electrons" best describes the
outer shell of the atoms in Group 17.
For more similar questions onouter shell
https://brainly.com/question/28565616
#SPJ11
which type of chemical formula tells how many atoms of each element are in a molecule but does not indicate their arrangement?
Answer: The type of chemical formula that tells how many atoms of each element are in a molecule but does not indicate their arrangement is a molecular formula.
What is a molecular formula?
A molecular formula is a chemical formula that displays the exact number of atoms of each element in one molecule of a compound, but it does not reveal how the atoms are arranged in a molecule.
A molecular formula is a symbolic representation of a molecule’s elements and the number of atoms of each element present in one molecule of that substance.
A molecular formula provides information about the kinds of atoms present in a molecule and the number of each kind of atom present, but it does not provide information about the structure of the molecule.
In other words, a molecular formula only tells us the number of atoms of each element present in a molecule and not their arrangement.
What is a chemical formula?
A chemical formula is a method of expressing the structure of a molecule in a short, concise form. Chemical formulas depict the number of atoms of each element in a molecule using chemical symbols, numerals, and other chemical shorthand. Chemical formulas can be used to represent both ionic and covalent compounds.
Learn more about molecular formula here:
https://brainly.com/question/28647690#
#SPJ11
a rigid cylinder contains a sample of gas at stp. what is the pressure of this gas after the sample is heated to 410 k?
Answer:
contains a sample of gas at stp. what is the pressure of this gas after the sample is heated to 410 k?
The final pressure of the sample of gas is 1.5 atm.
What is Gay-Lussac's law ?Gay-Lussac's law states that, the pressure of a gas, when its mass and volume are constant is directly proportional to its absolute temperature.
Here,
Initial pressure of the sample at STP, P₁ = 1 atm
Initial temperature of the sample at STP, T₁ = 273 K
Final temperature of the sample, T₂ = 410 K
According to Gay-Lussac's law,
P α T
So, P₁/T₁ = P₂/T₂
Therefore, the final pressure of the sample,
P₂ = (p₁/T₁) T₂
P₂ = (1/273) x 410
P₂ = 1.5 atm
Hence,
The final pressure of the sample of gas is 1.5 atm.
To learn more about Gay-Lussac's law, click:
https://brainly.com/question/2683502
#SPJ2
what is the principal organic product formed in the reaction of ethylene oxide with sodium cyanide (nacn) in aqueous ethanol?
The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethylene cyanohydrin ([tex]C_{2}H_{5}CN[/tex]). The reaction follows this general reaction scheme:
Ethylene oxide + NaCN → Ethylene cyanohydrin + NaOH
The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).
What is Ethyl nitrile?
Ethyl nitrile is an organic compound with the chemical formula [tex]C_{2}H_{5}CN[/tex]. This colorless liquid is a component of some commonly used solvents and in the manufacture of pharmaceuticals, textiles, and insecticides. It is used to generate pesticides, pharmaceuticals, and synthetic rubber during synthesis. The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).
Mechanism of Reaction: The reaction between ethylene oxide and sodium cyanide in aqueous ethanol is carried out by the Saponification of Cyanide. Saponification refers to the reaction of a base with a fatty acid to create a soap.
The ethylene oxide undergoes nucleophilic attack by the hydroxide ion to produce a salt. The sodium ethylene oxide salt reacts with NaCN to form an intermediate. This intermediate reacts with [tex]H_{2} O[/tex]to form Ethyl nitrile. Ethylene oxide is a toxic, flammable, and colorless gas. It is used as a sterilant for medical equipment and as a fumigant for spices and foods. It has a sweet odor and can cause eye and respiratory irritation, as well as skin burns. The reaction of ethylene oxide with NaCN in aqueous ethanol generates Ethyl nitrile, which is used in a variety of industries.
For more questions related to ethylene cyanohydrin.
https://brainly.com/question/14919939
#SPJ11
a certain substance has a heat of vaporization of 50.39 kj/mol. 50.39 kj / mol. at what kelvin temperature will the vapor pressure be 5.00 5.00 times higher than it was at 299 k? 299 k?
At approximately 437 Kelvin, the vapor pressure will be 5.00 times higher than it was at 299 K.
To determine the Kelvin temperature at which the vapor pressure will be 5.00 times higher than it was at 299 K, we can use the Clausius-Clapeyron equation, which relates the vapor pressure of a substance to its temperature and heat of vaporization.
The Clausius-Clapeyron equation is given by:
ln(P₂/P₁) = -(ΔHvap/R) * (1/T₂ - 1/T₁)
Where:
P₁ is the initial vapor pressure,
P₂ is the final vapor pressure (5.00 times higher than P₁),
ΔHvap is the heat of vaporization (50.39 kJ/mol),
R is the gas constant (8.314 J/(mol·K)),
T₁ is the initial temperature (299 K),
T₂ is the final temperature (unknown).
Rearranging the equation to solve for T₂, we have:
ln(P₂/P₁) = -(ΔHvap/R) * (1/T₂ - 1/T₁)
(1/T₂ - 1/T₁) = -(R/ΔHvap) * ln(P₂/P₁)
1/T₂ = (R/ΔHvap) * ln(P₂/P₁) + 1/T₁
T₂ = 1 / ((R/ΔHvap) * ln(P₂/P₁) + 1/T₁)
Now, let's plug in the given values and calculate T₂:
P₁ = vapor pressure at 299 K
P₂ = 5.00 * P₁ (5.00 times higher than P₁)
ΔHvap = 50.39 kJ/mol
R = 8.314 J/(mol·K)
T₁ = 299 K
T₂ = 1 / ((8.314 J/(mol·K) / (50.39 kJ/mol)) * ln(5.00) + 1/299 K)
Converting kJ to J and performing the calculations:
T₂ ≈ 1 / ((8.314 J/(mol·K) / (50.39 * 10^3 J/mol)) * ln(5.00) + 1/299 K)
T₂ ≈ 437 K
Therefore, at approximately 437 Kelvin, the vapor pressure will be 5.00 times higher than it was at 299 K.
Learn more about Vapor pressure, here:
https://brainly.com/question/29640321
#SPJ12
If I have 6.00 moles of gas held at a temperature of 93.5 C and in a container with a volume of 41.7 liters, what is the pressure of the gas (ka)?
The pressure of the gas is approximately 4.57 atm or 438.629 kPa
What is the pressure of the gas (ka)?The Ideal gas law or general gas equation states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.
It is expressed as;
PV = nRT
Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )
Given that;
P = pressure of the gas (in atm) = ?V = volume of the gas (in L) = 41.7 Ln = number of moles of gas = 6R = the ideal gas constant (0.08206 L.atm/mol.K)T = temperature of the gas (in Kelvin) 93.5°CFirst, we need to convert the temperature to Kelvin:
T (K) = T (Celsius) + 273.15
T (K) = 93.5 + 273.15
T (K) = 366.65 K
Now we can substitute the given values into the formula:
PV = nRT
P = nRT / V
P = ( 6 × 0.08206 × 366.65 ) / 41.7
P = 4.33 atm
Convert to kPa by multiplying the pressure value by 101.3
P = ( 4.33 × 101.3 ) kPa
P = ( 4.33 × 101.3 ) kPa
P = 438.629 kPa
The pressure is approximately 4.57 atm or 438.629 kPa.
Learn more about Ideal Gas Law here: brainly.com/question/4147359
#SPJ1
what is biological process in an organism that produces methane
Methane is a simple compound, formed by one atom of carbon and four atoms of hydrogen (CH4). Methane exists as a gas in the environment and is one of the most important fossil fuels for human society. When the methane molecule breaks down, it produces heat. Because of this property, some of our homes are fueled by methane gas, which is used to cook, heat our water, and fuel our furnaces and fireplaces. Methane can also be collected and transformed into electricity, serving as a natural energy source. Methane is also found in animal burps and farts (yes, you read correctly, farts!). Methane is one of the most abundant gases produced in the digestive tract as food is broken down. To summarize, methane is a common atmospheric gas. Remarkably, methane production and breakdown on Earth are processes driven mainly by microorganisms.
Microorganisms (microbes)Very small forms of life including bacteria, fungi, and some diminutive algae. are the smallest life forms known, invisible to unaided eyes. They are found in all habitats and ecosystems on Earth, in our daily surroundings as well as the most hostile and extreme habitats. Although they are extremely small, the diversity and abundance of microorganisms are enormous and remarkable. Recent estimates predict that 90–99% of the microbial species on Earth are still undiscovered [1]. Microbes are the major players in the recycling of organic matterAll cells and substances made by living organisms, including living and dead animals and plants. and important nutrients on Earth. They also regulate the production and breakdown of some atmospheric gases, including carbon dioxide, the oxygen we breathe, and of course, methane.
Methane has drawn the attention of the scientific community because its concentration in the atmosphere has almost tripled, since the Industrial Revolution began in the eighteenth century. Importantly, some studies indicate that these recent increases in atmospheric methane are happening more quickly as compared to geological time scales. Suggesting the influence of human activities associated to methane emissions. The problem with increased methane in the atmosphere is that, methane gas has the ability to trap the heat energy from the Sun and prevent this heat energy from returning to space, resulting in something known as the green-house effect. This heat-trapping capacity is very important, because it helps the Earth to stay warm enough to sustain life [2]. However, too much methane accumulation impacts the climate and contributes to global warming. Today, the methane cycle is a major research topic, since we need a deeper understanding of where all the methane on earth comes from and how it is transformed.
When vinegar and baking soda react, the
product gets colder. This is a (endothermic or exothermic) reaction
select the correct name for the compound. a five membered ring with an oxygen and four carbons. the ring has two double bonds, and the ring oxygen has two lone pairs. the name is pyrrole
The correct name for the compound is pyrrole.
Pyrrole is a five-membered aromatic heterocyclic compound consisting of one nitrogen atom and four carbon atoms. It is a heterocyclic aromatic organic compound having the chemical formula C4H4NH
Explanation :
What is pyrrole?
Pyrroles are heterocyclic aromatic compounds with a five-membered ring containing four carbon atoms and one nitrogen atom. Pyrrole and its derivatives, which include a nitrogen atom in the five-membered ring, are widely used in organic synthesis.
Pyrrole is a nitrogen-containing organic compound that occurs naturally.
The five-membered ring of pyrrole includes four carbon atoms and one nitrogen atom. It is a strong and stable organic compound that is critical in the synthesis of many organic molecules.
Pyrrole is a fundamental structure in many organic molecules, as well as a fundamental molecule in porphyrins, which are essential compounds in living cells. Pyrrole is often used in organic synthesis as a starting material, and it has a variety of other applications in different fields.
Pyrrole-containing molecules, such as the neurotransmitter serotonin and the heme group of hemoglobin, are important in biological systems.
To know more about the pyrrole https://brainly.com/question/13196842
#SPJ11
discuss the concentrations of reactants and products in the equilibrium in the two sketches and explain why the reactants are predominant species at the equilibrium in your graphs even though the equilibrium constant is larger than 1.
This indicates that the equilibrium state of the reaction—also referred to as an unfavourable equilibrium—favors the reactants.
The reaction mechanism might be one explanation for this. Reactants may build up before the equilibrium state is reached if the reaction has a slow step. The reaction's stoichiometry, in which the ratio of products to reactants is not ideal for product formation, may also be a factor.
Reactant concentrations can be lowered or product concentrations can be raised to tip the equilibrium in favor of product formation. Altering the reaction conditions, such as temperature or pressure, can also encourage the formation of the desired product.
Overall, a number of variables, such as the reaction mechanism, stoichiometry, and reaction conditions, affect the concentrations of reactants and products at equilibrium.
Learn more about equilibrium state
brainly.com/question/12084217
#SPJ4