Annealing is a process by which steel is reheated and then cooled to make it less brittle. Consider the reheat stage for a 100-mm-thick steel plate which is initially at a uniform temperature of Ti = 200 degree C and is to be heated to a minimum temperature of 550 degree C. Heating is effected in a gas-fired furnace, where products of combustion at T infinity = 800 degree C maintain a convection coefficient of h = 250 W/m2 K on both surfaces of the plate How long should the plate be left in the furnace?

Complete question is;

Annealing is a process by which steel is reheated and then cooled to make it less brittle. Consider the reheat stage for a 100 mm thick plate (ρ = 7830 kg/m3, Cp = 550 J/kg K, k = 48 W/m K). The plate initially is at 200 °C and is to be heated to a minimum temperature of 550 °C. Heating is effected in a gas-fired furnace where the products of combustion at T∞ = 800 °C maintain a convection heat transfer coefficient of h = 250 W/m.K on both surfaces of the plate. How long should the plate be left in the furnace?

Answer:

860 seconds

Explanation:

We are given;

Initial Temperature; Ti = 200 °C

Minimum Temperature; T_i = 550 °C

T∞ = 800 °C

convection coefficient; h = 250 W/m².K

ρ = 7830 kg/m³

Cp = 550 J/kg K

k = 48 W/m K

Plate thickness = 100mm

Thus,L = 100/2 = 50mm = 0.05 m

Let's find the biot number from the formula;

Bi = hL/K

Bi = (250 × 0.05)/48

Bi = 0.2604

Now, lowest temperature in the slab is given as;

θ_o = (T_o - T∞)/(T_i - T∞)

θ_o = (550 - 800)/(200 - 800)

θ_o = 0.4167

Now, from online tables calculation, we can find the root of the biot number.

Thus, root of the biot number Bi = 0.2604 is;

ζ1 = 0.488 rad

Also, C1 is gotten as 1.0396

Now,formula for thermal diffusivity is;

α = k/ρc

α = 48/(7830 × 550)

α = 1.115 × 10^(-5) m²/s

Also, from online tables, f(ζ1) = 0.401

Thus, we can find the time the plate should the plate be left in the furnace from;

-(ζ1)²(αt/L²) = In 0.401

-(ζ1)²(αt/L²) = -0.9138

t = (-0.9138 × 0.05²)/-(0.488² × 1.115 × 10^(-5))

t ≈ 860 s

In this exercise we want to calculate the time, in seconds, of the time left on the plate in the furnace, like this:

860 seconds

Organizing the information given in the statement we find that:

Using the formula given below, we will have how to calculate the number of biot, like this:

[tex]B = hL/K\\B = (250 * 0.05)/48\\B = 0.2604[/tex]

calculating the angle that corresponds to the temperature difference as:

[tex]\theta_o = (T_o - T)/(T_i - T)\\\theta_o = (550 - 800)/(200 - 800)\\\theta_o = 0.4167[/tex]

Using the formula below, we will have:

[tex]\alpha = k/\rho c\\\alpha = 48/(7830 * 550)\\\alpha = 1.115 * 10^{-5}[/tex]

Combining all the information from the previous calculations, we have that the time will be calculated as:

[tex]-(\phi)^2(\alpha t/L^2) = In 0.401\\-(\phi )^2(\apha t/^2) = -0.9138\\t = (-0.9138 * 0.05^2)/-(0.488^2 * 1.115 * 10^{-5})\\t = 860 s[/tex]

See more about time at brainly.com/question/2570752

2
A spring balance pulls with 5 N on a beam of 0.5 m.
What is the torque at the end of the beam?

Consider a 1.5-m-high and 2.4-m-wide glass window whose thickness is 6 mm and thermal conductivity is k = 0.78 W/m⋅K. Determine the steady rate of heat transfer through this glass window and the temperature of its inner surface for a day during which the room is maintained at 24°C while the temperature of the outdoors is −5°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1 = 10 W/m2⋅K and h2 = 25 W/m2⋅K, respectively, and disregard any heat transfer by radiation.

Which of the following best describes empathy?

the understanding of the feelings and beliefs of others
the lack of pride or boastfulness
the courage to speak up with one’s ideas
the possession of honesty and high morals

Think about a good game story that made you feel a mix of positive and negative emotions. What was the story, what emotions did you feel, and how did it make you feel them? Why did those emotions draw you into the story?

3.94 x 105) + (2.04 x 105)