The average acceleration of the intercontinental ballistic missile is approximately 108.33 m/s².
The student question is asking for the average acceleration of an intercontinental ballistic missile that goes from rest to a suborbital speed of 6.50 km/s in 60.0 s.
To calculate the average acceleration, we can use the formula:
Acceleration (a) = (Final Velocity (v) - Initial Velocity (u)) / Time (t)
Given the information, the missile starts from rest, so the initial velocity (u) is 0. The final velocity (v) is given as 6.50 km/s, and the time (t) is given as 60.0 s. We need to convert the final velocity from km/s to m/s for consistency.
1 km = 1,000 m
So, 6.50 km/s = 6,500 m/s
Now, we can plug the values into the formula:
a = (6,500 m/s - 0 m/s) / 60.0 s
a = 6,500 m/s / 60.0 s
a ≈ 108.33 m/s²
To learn more about : intercontinental
https://brainly.com/question/23822725
#SPJ11
compare that speed with the sun's orbital speed around our galaxy. based on your comparison, do you think the galaxy's gravity would be strong enough to retain the supernova debris if there were no interstellar medium to slow it down? compare that speed with the sun's orbital speed around our galaxy. based on your comparison, do you think the galaxy's gravity would be strong enough to retain the supernova debris if there were no interstellar medium to slow it down? supernova debris moves about 5000 times faster than the sun. the gravity of galaxy alone would not retain the supernova debris. supernova debris moves about 100 times faster than the sun. the gravity of galaxy alone would not retain the supernova debris. supernova debris moves about 100 times faster than the sun. the gravity of galaxy would not retain the supernova debris even if debris are slowed by the interstellar medium. supernova debris moves about 5000 times faster than the sun. the gravity of galaxy would not retain the supernova debris even if debris are slowed by the interstellar medium.
Supernova debris moves about 100 times faster than the Sun's orbital speed around our galaxy. Based on this comparison, the galaxy's gravity alone would not be strong enough to retain the supernova debris, even if the interstellar medium were to slow it down.
A supernova is a powerful and luminous explosion that occurs when a star dies. It releases an enormous amount of energy into space, sending a shock wave of gas and dust out into the surrounding space. The shock wave disperses the star's elements into space, including heavier elements that were produced during the supernova, such as gold and platinum. Supernova debris moves at a speed of about 5000 times faster than the sun's orbital speed around the galaxy. Therefore, if there were no interstellar medium to slow it down, the supernova debris would continue to move at that high speed and would not be retained by the gravity of the galaxy alone. This is because the speed at which the supernova debris is moving is much greater than the escape velocity of the galaxy, which is the minimum speed required for an object to break free from the gravitational pull of the galaxy.
Learn more about interstellar here:
https://brainly.com/question/29642617
#SPJ11
What is the rotational inertia of the following body about the indicated rotation axis? (The masses of the connect ing rods are negligible.)
The solution would involve identifying the relevant masses and distances, squaring the distances, multiplying by the masses, and summing them up to obtain the total rotational inertia.
When solving a physics problem, the first step is to clearly identify the given information, what is being asked, and any relevant equations or principles that apply. This problem provides a diagram of a rotating body and asks for its rotational inertia about a specific axis.
The problem also specifies that the masses of the connecting rods can be ignored. Rotational inertia, also known as moment of inertia, is a property of a rotating object that depends on its mass distribution and the axis of rotation. It can be calculated using the equation I = ∑mr², where I is the rotational inertia, ∑m is the sum of the masses, and r is the distance from the axis of rotation to each mass element squared.
Given the information in the problem and applying the relevant equation, the rotational inertia of the body about the indicated rotation axis can be calculated. To find the total rotational inertia, the answer would entail determining the pertinent masses and distances, squaring the distances, multiplying by the masses, and adding the results together.
To learn more about : rotational
https://brainly.com/question/25803184
#SPJ11
the specific gravity of ice is 0.917, whereas that of seawater is 1.025. what percent of an iceberg is above the surface of the water?
The specific gravity of ice is 0.917, whereas that of seawater is 1.025. Approximately 89.51% of an iceberg is above the surface of the water.
To find out what percent of an iceberg is above the surface of the water, we need to use Archimedes' principle, which states that the buoyant force on an object submerged in a fluid is equal to the weight of the fluid displaced by the object.
This means that an iceberg will float in water because it displaces an amount of water that weighs more than the iceberg itself.
The percentage of an iceberg above the surface of the water can be found using the following equation:
Percent above water = (Volume of iceberg above water / Total volume of iceberg) x 100
To find the volume of an iceberg above the water, we can use the following equation:
Volume of iceberg above water = Volume of iceberg x (Density of ice / Density of seawater)
So,Percent above water = [(Volume of iceberg x (Density of ice / Density of seawater)) / Total volume of iceberg] x 100
Percent above water = [(1 x (0.917 / 1.025)) / 1] x 100
Percent above water = 89.51%
Therefore, approximately 89.51% of an iceberg is above the surface of the water.
For more such questions on specific gravity, click on:
https://brainly.com/question/29816648
#SPJ11
a rock of mass m is thrown horizontally off a building from a height h, as shown above. the speed of the rock as it leaves the thrower's hand at the edge of the building is vo question what is the kinetic energy of the rock just before it hits the ground?
The kinetic energy of the rock simply earlier than it hits the ground is [tex]\frac{1}{2}mv^2[/tex]
Kinetic energy is a fundamental concept that describes the strength possessed by an object due to its movement. Its miles are defined because the energy that a body possesses as a result of its motion, which relies upon its mass and velocity. The method for kinetic energy is KE = 1/2mv², in which m is the mass of the object and v is its speed.
Kinetic energy is a scalar quantity and is measured in joules (J) in the SI system. Kinetic energy plays an essential role in many areas of physics, such as mechanics, thermodynamics, and relativity. It is an important concept in understanding the behavior of moving objects and how they interact with their environment. In summary, kinetic energy is the energy possessed by a moving object and is dependent on its mass and velocity.
To know more about Kinetic energy visit here:
brainly.com/question/26472013
#SPJ4
compared to terrestrial planets, jovian planets are group of answer choices larger and denser smaller and denser larger and less dense smaller and less dense
Jovian planets are a group of answer choices that are larger and less dense compared to Terrestrial planets. The term "jovian" was coined after the planet Jupiter, which is the largest planet in the Solar System.
These planets are made up mostly of hydrogen, helium, and other gases, and have a gaseous, liquid, or icy outer layer that surrounds a dense, rocky core.The four jovian planets in the Solar System are Jupiter, Saturn, Uranus, and Neptune.
They are also known as gas giants or outer planets. Compared to terrestrial planets, they are larger and have a lower density due to their composition of gases and lack of a solid surface.
They also have a greater mass and gravity, which allows them to retain large atmospheres and maintain many moons and rings.Jovian planets are also characterized by their longer orbital periods, slower rotations, and lower temperatures.
They are located farther from the Sun than terrestrial planets and have a lower surface temperature due to their distance from the Sun and their composition. They are important to study because they can provide insights into the formation and evolution of our Solar System and other planetary systems.
To Learn More About Terrestrial
https://brainly.com/question/1248545
#SPJ11
estimate the thickness of the earth's atmosphere. from your chemistry class, you know that the most common speed of a nitrogen molecule is 670 m/s. the molecules' velocity is pointed along random directions, but some molecules head straight up; i.e. directly away from the earth's center. consider the thickness of the atmosphere as the highest point that such a nitrogen molecule can fly to, if it goes straight up. what is the altitude?
The estimated thickness of the Earth's atmosphere, the altitude at which a nitrogen molecule would stop traveling straight up, is approximately 22.4 km.
The maximum altitude that a molecule can reach is determined by the balance between the molecule's kinetic energy, which is proportional to the square of its velocity, and the potential energy due to gravity, which is proportional to the distance from the center of the Earth.
Using the equation for potential energy :
[tex]mgh = 1/2mv^2\\h = v^2/2g\\h = (670 m/s)^2 / (2 * 9.81 m/s^2) = 22.4 km[/tex]
Therefore, the estimated thickness of the Earth's atmosphere, defined as the altitude at which a nitrogen molecule would stop traveling straight, is approximately 22.4 km.
To know more about potential energy, here
brainly.com/question/24284560
#SPJ4
if a dung beetle can roll (without slipping) a ball of dung whose radius is 2.5 cm at a linear speed if 3.5 m/s, through what angle does the ball roll as the ball moves a distance of 15 cm?
If a dung beetle can roll (without slipping) a ball of dung whose radius is 2.5 cm at a linear speed if 3.5 m/s, the angle through which the ball rolls as the ball moves a distance of 15 cm is approximately 343.8 degrees.
Assuming that the ball of dung rolls without slipping, the distance traveled by any point on the circumference of the ball is given by the circumference of the circle it traces. The circumference of the ball can be calculated as follows:
C = 2πr
C = 2π(2.5 cm)
C = 15.7 cm
The distance traveled by the ball is given as 15 cm. Therefore, the number of revolutions made by the ball can be calculated as follows:
Number of revolutions = Distance traveled by ball / Circumference of ball Number of revolutions
Number of revolutions = 15 cm / 15.7 cm
Number of revolutions = 0.955
Since the ball completes less than one full revolution, the angle through which it rolls can be calculated as follows:
Angle = Number of revolutions x 360 degrees
Angle = 0.955 x 360 degrees
Angle = 343.8 degrees (rounded to one decimal place)
Therefore, the ball of dung rolls through an angle of approximately 343.8 degrees as it moves a distance of 15 cm.
For more such questions on linear speed, click on:
https://brainly.com/question/20709784
#SPJ11
describe briefly what types of observations you will make in activity 1-1 and 1-2 to examine the interactions of magnetic poles with various objects and with each other
As we observe the Activity 1-1 we can make observations while interactions of magnetic poles with various objects using magnets.
If objects like aluminum foil or coins or paper clips can be test by a magnet and can see if they are attracted to or repelled by the magnet.
We can also observe the strength of magnetic force. To do this we will make changes in distance between the magnet and the object
If we are considering Activity 1-2 there also we can make observations while interactions of magnetic poles with various objects
We can brought the two magnets together and observe if they attract or repel each other. We can make observations.
We will observe the interaction between magnets with the distance between them.
We will observe the behavior of magnetic poles also- with opposite poles and with like poles. Similarities and differences in their interactions.
Learn more about magnetic poles:
https://brainly.com/question/29869469
#SPJ4
while closer to the sun, venus may appear to be closer to jupiter because of where it is around the sun and the position of the camera. if you were viewing a distant system of planets around another star, what clues could you use to tell where they are in space?\
While closer to the sun, Venus may appear to be closer to Jupiter because of where it is around the sun and the position of the camera. Orbital period, Transit method, Radial velocity method, Direct imaging and Astrometry.
In order to determine the positions of planets in a distant star system, you could use the following clues:
1. Orbital period: By observing the time it takes for a planet to complete one orbit around its star, you can estimate its distance from the star. Planets closer to the star have shorter orbital periods than those farther away.
2. Transit method: When a planet passes in front of its star, it causes a slight dip in the star's brightness. By measuring this change in brightness, you can estimate the size of the planet and its distance from the star.
3. Radial velocity method: As a planet orbits its star, it causes the star to wobble slightly due to the planet's gravitational pull. This wobble can be detected as a shift in the star's spectrum, allowing you to determine the planet's mass and distance from the star.
4. Direct imaging: If the planets are far enough away from their star and have sufficient contrast, they may be directly imaged using high-resolution telescopes. This would provide information about their positions relative to the star.
5. Astrometry: By precisely measuring a star's position in the sky over time, you can detect the slight wobble caused by the presence of planets. This method can help determine the positions and masses of the planets in the system.
For more such questions on sun
brainly.com/question/13563746
#SPJ11
A clown figurine is located 10.0 cm in front of a thin lens that has a focal length of 14.0 cm. Where would the image appear?
An optical system's focal length, which is the inverse of a system's optical power, indicates how strongly a system converges and diverges light. A system with a good focal length is said to converge light.
A focal length is defined.The focal length of the a mirror (or lenses) is the separation between its pole and focal point. It can also be measured as the distance between its optical centre and pole. A point where a parallel light ray is "focused" after reflection inside the mirror is known as the central focus (F) of a mirror.
What does focal length vs. focal distance mean?In photography, focal length—which is a completely different characteristic of a lens—is mentioned much more frequently than focal distance. While not entirely dependent on it, focal length and focal distance are connected. This is what? The focal distance measures how far the object you are focused is from the camera sensor.
To know more about power visit:
https://brainly.com/question/31260332
#SPJ1
Answer: 5.25cm,virtual
Explanation:
a wave packet describes a particle having momentum show that the group velocity is and the phase velocity is how can the phase velocity physically be greater than c?
Wave packet: particle momentum. Group velocity and phase velocity. Phase velocity > c possible. Relativity allows apparent faster-than-light motion.
In wave-molecule duality, a molecule can be depicted by a wave parcel, which is a blend of many rushes of various frequencies and amplitudes that movement together in space. The gathering speed, which decides how the pinnacle of the wave parcel travels through space, is given by the subsidiary of the wave bundle's scattering connection as for energy. The stage speed, which decides how the period of the singular waves inside the bundle travels through space, is given by the proportion of the wave's recurrence to its wave number.
The stage speed can be more prominent than the speed of light, yet this doesn't abuse the laws of relativity since it doesn't convey data quicker than light. All things being equal, it mirrors the way that the wave parcel is comprised of various frequencies that movement at various paces.
To learn more about wave packet, refer:
https://brainly.com/question/28902442
#SPJ4
a steady current flows through an inductor. if the current is doubled while the inductance remains constant, the amount of energy stored in the inductor group of answer choices increases by a factor of 4. increases by a factor that depends on the geometry of the inductor. none of the above. increases by a factor of 2. increases by a factor of
The energy stored in the inductor is doubled when the current is doubled. The amount of energy stored in the inductor increases by a factor of 4. Here option A is the correct answer.
The amount of energy stored in an inductor is given by the formula: E = 0.5 × L × I^2, where L is the inductance and I is the current flowing through the inductor.
If the current through an inductor is doubled while the inductance remains constant, then the energy stored in the inductor will increase by a factor of 4. This can be seen by substituting 2I for I in the formula:
E' = 0.5 × L × (2I)^2
= 0.5 × L × 4I^2
= 2 × (0.5 × L × I^2)
= 2E
When the current through an inductor is doubled while the inductance remains constant, the amount of energy stored in the inductor increases by a factor of 4. This is because the energy stored in an inductor is directly proportional to the square of the current flowing through it, as expressed by the formula E = 0.5 × L × I^2, where E is the energy stored, L is the inductance, and I is the current.
To learn more about inductor
https://brainly.com/question/15872437
#SPJ4
Complete question:
A steady current flows through an inductor. if the current is doubled while the inductance remains constant, the amount of energy stored in the inductor group of answer choices
A - increases by a factor of 4.
B - increases by a factor that depends on the geometry of the inductor.
C - increases by a factor of 2.
D - none of the above.
galaxy evolution is a very active area of research. look for information on current or future observatories that investigates galaxy evolution (such as the james webb space telescope). how big are the telescopes? at what wavelengths do they look? when are they built? why are they suited for studying galaxy evolution?
Galaxy evolution is a very active area of research, and there are several current and future observatories that investigate galaxy evolution, such as the James Webb Space Telescope (JWST).
These telescopes are quite large, with the JWST being the largest telescope ever built. It has a primary mirror that is 6.5 meters in diameter and is composed of 18 hexagonal mirror segments. The JWST will observe the universe at infrared wavelengths, between 0.6 and 28 micrometers.
The JWST is set to launch in 2021, and it will be the most advanced space telescope ever built. Its large size and infrared capabilities make it ideally suited for studying galaxy evolution. By observing galaxies in the infrared, the JWST will be able to see through the dust that often obscures the visible light emitted by galaxies.
The James Webb Space Telescope is a large telescope that will observe the universe at infrared wavelengths, and it is ideally suited for studying galaxy evolution. Its large size and infrared capabilities will allow astronomers to study the early stages of galaxy formation and evolution, which is a key area of research in astronomy.
To Learn More About Galaxy
https://brainly.com/question/29694849
#SPJ11
how many 23- w lightbulbs can be connected in parallel across a potential difference of 75 v before the total current in the circuit exceeds 2.9 a ?
We can 9 bulbs of 23 W is parallel across a potential difference of 75 v before the total current in the circuit exceeds 2.9 Ampere.
The current generated by single bulb will be calculated by the formula -
Current = power/potential difference
Keep the values
Current = 23/75
Current = 0.3 Amperes.
Now, the number of bulbs will be calculated as -
Number of bulbs = total current/current per bulb
Number of bulbs = 2.9/0.3
Performing division
Number of bulbs = 9.6
The number of bulbs can not be fraction, hence, required number is 9.
Learn more about current -
https://brainly.com/question/1100341
#SPJ4
On this day, the Sun is at its highest point in the sky. This day marks the first day of summer. It also is known as the longest day because it has the most hours of daylight of any day during the year.
*
Autumnal Equinox
Summer Solstice
Vernal Equinox
Winter Solstice
the general momentum equation for elastic and inelastic collisions should be used to determine if the collision is elastic or inelastic. the general momentum equation for elastic and inelastic collisions should be used to determine if the collision is elastic or inelastic. true false
false. The general momentum equation may be used to evaluate both elastic and inelastic collisions, but it cannot tell whether a collision is elastic or inelastic on its own.
The quantity of kinetic energy preserved during the impact determines the definition of elastic and inelastic collisions. Kinetic energy is conserved in an elastic collision, which means that the total kinetic energy before and after the impact stays constant. Some kinetic energy is lost in an inelastic collision, and the total kinetic energy after the collision is less than the total kinetic energy before the contact. To evaluate whether a collision is elastic or inelastic, one must examine the amount of kinetic energy preserved during the collision, in addition to applying the general momentum equation.
learn more about collisions here:
https://brainly.com/question/13138178
#SPJ4
5. Protons and anti-protons interact via the process:
p+p2n+2π* + n°
a) Write this interaction at the quark level and hence show that there is no change in quark flavour.
b) Show that baryon number is conserved.
c) What evidence is there that this is controlled by the strong interaction?
a) The interaction between a proton and an antiproton can be written at the quark level as: uud + uud → udd + udd + uubar + uubar.
b) the total baryon number before and after the interaction is the same:
B_before = 1 (proton) + 1 (neutron) = 2
B_after = 1 (neutron) + 1 (neutron) + 1 (Λ0) = 3
c) This interaction is controlled by the strong interaction, which is one of the four fundamental forces of nature.
What is an interaction ?
a) The interaction between a proton and an antiproton can be written at the quark level as:
uud + uud → udd + udd + uubar + uubar.
where u, d, and ubar denote the up quark, down quark, and anti-up quark, respectively. This interaction does not involve any quark flavor change since the number of each type of quark (up, down, and anti-up) is conserved.
What is baryon?
b) Baryon number (B) is defined as the total number of baryons minus the total number of antibaryons. In this interaction, we start with two baryons (a proton and a neutron) and end with three baryons (two neutrons and a Λ0 particle) and no antibaryons. Therefore, the change in baryon number is:
ΔB = (number of baryons) - (number of antibaryons) = 2 - 0 = 2
Since ΔB is non-zero, we might think that baryon number is not conserved. However, it is important to note that the Λ0 particle is a baryon with a baryon number of +1, which cancels out the baryon number of the two neutrons (-1 each). Therefore, the total baryon number before and after the interaction is the same:
B_before = 1 (proton) + 1 (neutron) = 2
B_after = 1 (neutron) + 1 (neutron) + 1 (Λ0) = 3
Therefore, baryon number is conserved in this interaction.
c) This interaction is controlled by the strong interaction, which is one of the four fundamental forces of nature. The strong interaction is responsible for binding quarks together to form hadrons, such as protons, neutrons, and Λ0 particles. The exchange of gluons, which are the carrier particles of the strong force, between quarks is what allows them to interact and bind together. The fact that this interaction involves the production of multiple hadrons and conservation of baryon number is consistent with it being a strong interaction. Additionally, experiments have shown that the strong force is responsible for binding protons and neutrons together in the nucleus of an atom.
To know more about baryon, visit:
https://brainly.com/question/13981494
#SPJ1
a wire is drawn through a die, stretching it to six times its original length. by what factor does its resistance increase?
When a wire is pulled through a die and stretched six times its initial length, the cross-sectional area reduces according to the length increase. According to Ohm's law,
this change in cross-sectional area influences the wire's resistance, which is directly proportional to its length and inversely proportional to its cross-sectional area. The wire's resistance grows by a factor of 36, which is equal to the square of the stretching factor (6 x 6 = 36). This is due to the wire's length increasing by a factor of six while its cross-sectional area decreasing by a factor of six times six. As a result, the resistance of the wire after stretching it to six times its original length will be 36 times its original resistance, assuming all other factors (such as the resistivity of the material) remain constant.
learn more about wire here:
https://brainly.com/question/12984460
#SPJ4
two long, straight wires are parallel and 5 cm apart. one carries a current of 2.0 a, the other a current of 5.0 a. if the two currents flow in the same directions, what is the magnitude and direction of the force per unit length of one wire on the other? group of answer choices
The magnitude of the force a unit length of one wire on the other is 2.0 × 10⁻⁵ N/m.
The direction of the force can be found using the right-hand rule: if you point your right thumb in the direction of the current in one wire, and your fingers in the direction of the current in the other wire, the direction of the force is perpendicular to both, pointing towards the other wire.
Thus, the force a unit length is given by:
F =[tex]\mu_o * I_1 * I_2 * L / (2 * \pi * d)[/tex]
= (4π × 10⁻⁷ N/A²) * (2.0 A) * (5.0 A) * (1 m) / (2 * π * 0.05 m)
= 2.0 × 10⁻⁵ N/m
Newton's laws of motion, which indicate that unless acted upon by a net external force, an object will stay at rest or in uniform motion along a straight line, describe force. According to the second rule of motion, an object's acceleration is inversely proportional to its mass and directly proportional to the net force exerted on it. This law is expressed mathematically as F = ma, where F is the net force, m is the mass of the object, and a is its acceleration.
Forces can be contact forces, such as friction and tension, or non-contact forces, such as gravity and electromagnetic forces. Understanding forces is important in many fields, including physics, engineering, and mechanics, and is necessary for designing structures, machines, and vehicles that can withstand and utilize them.
To learn more about Force visit here:
brainly.com/question/26115859
#SPJ4
One summer afternoon, Kim heard on the news that the humidity in Ocala, Florida was 80%. How would the air feel when Kim goes outside?
Group of answer choices
cold and dry
warm and wet
cold and wet
warm and dry
the circuit in the drawing contains five identical resistors. the 45-v battery delivers 58 w of power to the circuit. what is the resistance r of each resistor?
The resistance R of each resistor is approximately 6.976 Ω.
To find the resistance R of each resistor in the circuit, first, we need to determine the total resistance in the circuit and the current flowing through it.
We can use the formula for power: P = V * I, where P is power, V is voltage, and I is current. Rearranging for I, we get:
I = P / V
I = 58 W / 45 V
I = 1.29 A
Now, we can use Ohm's Law, V = I * R, to find the total resistance in the circuit:
R_total = V / I
R_total = 45 V / 1.29 A
R_total = 34.88 Ω
Since there are five identical resistors in the circuit, we can find the resistance of each resistor by dividing the total resistance by 5:
R = R_total / 5
R = 34.88 Ω / 5
R = 6.976 Ω
Therefore, the resistance R of each resistor is approximately 6.976 Ω.
Know more about resistance here:
https://brainly.com/question/17563681
#SPJ11
did you use the technique that allows you to rapidly advance the read-out of the observed optical rotation? what is the technique?
The technique that allows one to quickly advance the read-out of the observed optical rotation is known as Fourier transform infrared (FTIR) spectroscopy.
It is a technique that uses infrared light to observe the absorption, emission, and reflection of light in a sample. In FTIR spectroscopy, a beam of infrared light is passed through a sample, and the amount of light absorbed or reflected is measured. This information is then Fourier transformed to obtain a spectrum that is characteristic of the sample. The FTIR spectrum can be used to identify the molecular structure of the sample.
It is an essential technique in the fields of chemistry, biology, and materials science. It has applications in the analysis of polymers, proteins, and other biomolecules. FTIR spectroscopy is also used in the characterization of pharmaceuticals, cosmetics, and food products. It is a valuable tool for understanding the molecular structure of materials and for developing new materials with specific properties.
To learn more about Spectroscopy :
https://brainly.com/question/28457917
#SPJ11
a rocket ship at rest in space gives a short blast of its engine, firing 65 kg of exhaust gas out the back end with an average velocity of 450 m/s. what is the magnitude of the change in momentum of the rocket during this blast?
The magnitude of the change in momentum of the rocket during this blast is 29250 N-s. A rocket ship at rest in space gives a short blast of its engine, firing 65 kg of exhaust gas out the back end with an average velocity of 450 m/s.
During a short blast of its engine, the rocket ship fires 65 kg of exhaust gas out of the back end at an average velocity of 450 m/s. The change in momentum of the rocket during the blast can be calculated using the law of conservation of momentum, which states that the total momentum of an isolated system remains constant if no external forces act upon it.
A rocket's initial momentum is zero since it is at rest. Therefore, the change in momentum of the rocket is equal to the momentum of the exhaust gas exiting the back end of the rocket.
The magnitude of the change in momentum of the rocket during this blast can be calculated as follows: Change in momentum of the rocket = Momentum of exhaust gas= (mass of exhaust gas) x (velocity of exhaust gas)= 65 kg x 450 m/s= 29250 N-s.
Therefore, the magnitude of the change in momentum of the rocket during this blast is 29250 N-s.
To know more about momentum, refer here:
https://brainly.com/question/30487676#
#SPJ11
two objects are initially the same height above the ground. simultaneously, one is released from rest and the other is shot fof horizontally with a n initial speed of 2.5 m/s. the two objects collide after falling 20m. how far apart were the object initially?
We may use the equations of motion to calculate the initial distance between the two objects in this issue. Let's call the starting height of the objects "h." Because the first item is at rest, its initial vertical velocity is 0.
When the second item is launched horizontally at a speed of 2.5 m/s, its initial vertical velocity is also 0. When the items crash after falling 20 meters, we may apply the following equation of motion: h = 1/2gt^2 where g denotes gravity's acceleration and t the time it takes for the objects to collide. The horizontal velocity of the second item may be used to calculate the time t: distance = time x speed 20m = 2.5m/s x t t = 8 seconds Now we can use the equation of motion again to find h: h = 1/2gt^2 = 1/2 x 9.81 m/s^2 x (8 s)^2 = 313.92 m Therefore, the initial distance between the objects was 313.92 meters.
learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
a torroidal solenoid has inner and outer radii of 6.06 cm and 16.6 cm and carries a current of 20.3 a. calculate the number of wire turns required to produce a 13.5 mt magnetic field inside the coil a distance of 10.5 cm from its center
We would need approximately 45,420 wire turns to produce a 13.5 mT magnetic field inside the toroidal solenoid at a distance of 10.5 cm from its center.
The magnetic field inside a toroidal solenoid is given by:
B = (μ0 * N * I) / (2 * π * r)
where B is the magnetic field, μ0 is the permeability of free space, N is the number of wire turns, I is the current, and r is the radial distance from the center of the toroid. In this case, we want to find N, so we can rearrange the equation to solve for it:
N = (2 * π * r * B) / (μ0 * I)
Plugging in the given values, we get:
N = (2 * π * 0.105 m * 13.5 T) / (4 * π * 10^-7 T·m/A * 20.3 A)
N ≈ 45,420 turns
To know more about solenoid, here
brainly.com/question/18511912
#SPJ4
at what part of an elliptical orbit does an earth satellite have the greatest speed? the least speed?
An elliptical orbit is an oval-shaped path that a satellite takes around its primary body, such as the Earth. The speed of a satellite in its orbit varies depending on its distance from the primary body, which changes throughout the elliptical orbit.
According to Kepler's laws of planetary motion, a satellite moves fastest when it is closest to the primary body, and slowest when it is farthest away. Therefore, an Earth satellite has the greatest speed at the point in its orbit called perigee, which is the point where it is closest to the Earth. At perigee, the satellite experiences the strongest gravitational pull from the Earth, which accelerates it and increases its speed.
Conversely, the satellite has the least speed at the point called apogee, which is the farthest point in its orbit from the Earth. At apogee, the satellite experiences the weakest gravitational pull from the Earth, which decelerates it and decreases its speed.
It's important to note that the speed of a satellite in orbit is also affected by other factors, such as the presence of other gravitational bodies and atmospheric drag. However, the varying distance from the primary body is the primary factor affecting the speed of a satellite in an elliptical orbit around the Earth.
To learn more about elliptical orbit
https://brainly.com/question/18283031
#SPJ4
Jenny wants to change her graduation photograph into a black-and-white image. Which tool will Jenny use?
Answer: Jenny can use many apps and Software to change her graduation photo into black and white with many tools the best tool is desaturation.
Explanation:
so theres your answer
a nucleus at rest spontaneously disintegrates into 3 equal masses. if one mass flies east and a second north, what is the direction of the third piece? take all the 3 masses to have equal speeds.
A nucleus at rest spontaneously disintegrates into 3 equal masses. if one mass flies east and a second north, the direction of the third piece will be in the southwest direction.
When a nucleus at rest spontaneously disintegrates into three equal masses with equal speeds, the total momentum before and after the disintegration must be conserved.
Since the initial momentum was zero, the final momentum must also be zero. If one mass flies east and another flies north, the third mass must fly in a direction that cancels out the momentum of the other two masses.
In this case, the third mass must fly in the southwest direction, forming a 45-degree angle with both the east and north directions. This will ensure that the total momentum remains conserved at zero.
For more such questions on nucleus, click on:
https://brainly.com/question/29282968
#SPJ11
how much work is done when John did when lifting a 20kg mass to a height of 2m?
Answer:
To calculate the work done by John when lifting a 20kg mass to a height of 2m, we can use the formula: work = force x distance x cos(theta) where force is the weight of the mass (20kg x 9.81 m/s^2 = 196.2 N), distance is the height the mass is lifted (2m), and cos(theta) is the angle between the force and the displacement (cos(0) = 1, since the force and displacement are in the same direction). Substituting these values into the formula, we get: work = 196.2 N x 2m x 1 work = 392.4 J Therefore, John did 392.4 joules of work when lifting the 20kg mass to a height of 2m.
a 0.37-kg mass attached to a spring undergoes simple harmonic motion with a period of 0.55 s . part a what is the spring constant of the spring?
Answer:
Explanation:
The spring constant k of the spring is 48.277 N/m.
Simple harmonic motion or SHM is the motion in which the motion is oscillatory which means that the motion is to and fro along a reference point ie, the mean position. The magnitude of the restoring force is proportional to the displacement of the body from mean position. To calculate the spring constant k, we use the formula of time period :- T=2π√(m/k). Putting the values as per the given data, we substitute T=0.55, m=0.37kg, the value of spring constant we get is k=48.277 N/m.
To learn more about Simple Harmonic Motion visit:
https://brainly.com/question/20885248
The spring constant of the spring is 4.90 N/m.
To find the spring constant (k), we can use the formula for the period of simple harmonic motion: T = 2π√(m/k), where T is the period, m is the mass, and k is the spring constant. In this case, T = 0.55 s and m = 0.37 kg. Rearranging the formula to solve for k, we get k = (4π²m) / T².
1. Substitute the given values into the formula: k = (4π²(0.37 kg)) / (0.55 s)²
2. Calculate the square of the period: (0.55 s)² = 0.3025 s²
3. Multiply the mass by 4π²: 4π²(0.37 kg) = 5.8074 kg
4. Divide the result from step 3 by the result from step 2: 5.8074 kg / 0.3025 s² = 4.90 N/m
Hence, the spring constant of the spring is 4.90 N/m.
To know more about spring constant click on below link:
https://brainly.com/question/20388857#
#SPJ11