At this point, you should have some idea of how a strong base behaves in solution once it dissolves. Choose all that apply as they relate to a strong base.
Conjugates of strong bases are ions from group 1 and 2 of the periodic table
A strong base dissociates partially in solution to produce its conjugate
The conjugate of a strong base is basic in solution
Conjugates of strong bases are ions from the transition metals in the periodic table
A strong base dissociates completely in solution to produce its conjugate
The conjugate of a strong base is neutral in pH when in solution

Answer: The empirical formula for a 100-g sample containing 87.42 g of nitrogen and 12.58 g of hydrogen is NH₃.

The empirical formula of a chemical compound refers to the simplest positive integer ratio of the atoms present in the compound. In general, the molecular formula and the empirical formula may be different. However, the empirical formula is always a part of the molecular formula.

A molecule's empirical formula can be used to calculate its molecular formula when the molecule's molar mass is known.

How to calculate the empirical formula?

Step 1: Calculate the number of moles of each element.

Step 2: The number of moles of each element is divided by the smallest number of moles to obtain the mole ratio.

Step 3: Multiply the mole ratio obtained in step 2 by a whole number to get the simplest whole number ratio. The calculation of the empirical formula of a compound with known composition involves the determination of the relative numbers of atoms of each element in the compound. It is computed using the following formula:

Empirical formula = molecular formula / greatest common factor

Learn more about empirical formula here:

https://brainly.com/question/14044066#


#SPJ11

The concentration of ammonium ions in the resulting mixture is 0.104 M.

The number of moles of NaCl that is added to the solution. Convert the volume of NaCl solution into liters:158 mL × (1 L/1000 mL) = 0.158 L

Calculate the number of moles of NaCl using the formula: moles = concentration × volumeMoles of NaCl = 0.148 mol/L × 0.158 L = 0.0234 moles

Repeat the above process for ammonium nitrate. 228 mL × (1 L/1000 mL) = 0.228 L0.369 mol/L × 0.228 L = 0.0841 moles of ammonium nitrate

The number of moles of ammonium ions that is produced by 0.0841 moles of ammonium nitrate.NH4NO3(s) → NH4+(aq) + NO3-(aq)Mole ratio between NH4NO3 and NH4+ = 1:1

Therefore, moles of NH4+ = moles of NH4NO3 = 0.0841 molesStep 4: Determine the final volume of the solution.Vfinal = VNaCl + VNH4NO3Vfinal = 0.158 L + 0.228 L = 0.386 L

The concentration of ammonium ions using the formula: moles/volumeConcentration of ammonium ions = 0.0841 moles/0.386 L = 0.2179 moles/L

Concentration of ammonium ions in the resulting mixture = 0.2179 mol/L = 0.104 M. Therefore, the concentration of ammonium ions in the resulting mixture is 0.104 M.

to know more about ammonium refer here:

https://brainly.com/question/10834028#

#SPJ11

This ratio shows that to prepare a buffer with a pH of 4.42 using formic acid, you require the ratio of [sodium formates]/[formic acid] to be 49.23:1.

Explanation:

To prepare a buffer with a pH of 4.42 using formic acid, you need to determine the ratio of [sodium formate]/[formic acid].

A buffer solution is a solution that can resist changes in pH, even when subjected to acid or base. The buffer solution comprises a weak acid or a weak base with its conjugate base or acid, respectively.

Suppose you want to prepare a buffer with a pH of 4.42 using formic acid, with a Ka of 1.8x10^-4. Find the ratio of [sodium format]/[formic acid]. Here, we can use the Henderson-Hasselbalch equation, which is:

pH = pKa + log ([A-] / [HA])

Here, [A-] represents the conjugate base concentration, and

[HA] represents the weak acid concentration.

Rearranging the above equation gives:

log([A-]/[HA]) = pH - pKa putting values gives:

log([A-]/[HA]) = 4.42 - (-log 1.8x10^-4) lo([A-]/[HA]) = 4.42 + 3.74log([A-]/[HA]) = 8.16log([A-]/[HA]) = 1.74                                                                        

Now, taking antilog of both sides: [A-]/[HA] = 10^1.74[A-]/[HA] = 49.23:1

This ratio shows that to prepare a buffer with a pH of 4.42 using formic acid, you require the ratio of [sodium formate]/ [formic acid] to be 49.23:1.

To know more about Formic acid, refer here:

https://brainly.com/question/28169167#

#SPJ11

The salts that form a basic aqueous solution at 298 K are NaF, LiOH, and MgS. The pH of a solution can be classified as acidic, basic, or neutral.

In chemistry, the ion Na+ would stand for a solution of table salt, also known as sodium chloride (NaCl), in water (aq). The prefix aqua gives rise to the adjective aqueous, which may be defined as relating to, being like, or being dissolved in water.
In chemistry, water is considered to be a ubiquitous solvent since it is both a good solvent and one that is naturally plentiful.

Acids have a pH of less than 7, bases have a pH greater than 7, and a pH of 7 is considered neutral.

Therefore, aqueous solutions with a pH less than 7 are acidic, while those with a pH greater than 7 are basic.

An acidic aqueous solution has an excess of hydrogen ions (H+), while a basic aqueous solution has an excess of hydroxide ions (OH).

At 298 K, the salts that form a basic aqueous solution are NaF, LiOH, and MgS.

The reaction of NaF is: F(aq) + H2O(l)  HF(aq) + OH(aq). LiOH reacts to produce:

LiOH(s) → Li⁺(aq) + OH⁻(aq)

MgS reacts to produce:

MgS(s) + H₂O(l) → Mg(OH)₂(aq) + H₂S(aq)

Therefore, the correct answer is:NaF, LiOH and MgS

To know more about the aqueous solution https://brainly.com/question/2159485

#SPJ11

The mass of water that forms from the reaction of 2.30 L of hydrogen gas and 1.86 L of oxygen gas at 700 torrs and 11.1°C is: 7.56g.

Hydrogen and oxygen react to form water. The balanced equation for the reaction is: 2H₂ + O₂  → 2H₂ O

The molar volume of an ideal gas at standard conditions (0°C and 1 atm) is 22.4 L.

PV = nRT is the formula for finding the number of moles (n) of a gas. PV = nRT can be rearranged to n = PV/RT.

The following equation can be used to calculate the mass of a substance: mass = moles × molar mass

The molar mass of water is 18.01528 g/mol.

Step 1: Convert the given volumes of hydrogen gas and oxygen gas to moles.

n(H₂) = (700 torr × 2.30 L)/(760 torr/L) × (284.3 K/284.3 K) = 0.210 moles of H₂n

(O₂) = (700 torr × 1.86 L)/(760 torr/L) × (284.3 K/284.3 K) = 0.129 moles of O₂

Step 2: Use the balanced chemical equation to determine the mole ratio between hydrogen and water.

2H₂ + O₂ → 2H₂On(H₂O)

= 2 × n(H₂) = 0.420 moles of H₂O

Step 3: Use the molar mass of water to calculate the mass of water.

mass(H₂ O) = n(H₂ O) × molar mass(H₂ O)

mass(H₂ O) = 0.420 moles × 18.01528 g/mol = 7.56 g

Since we are given volumes in the problem, we must convert them to moles before proceeding with the calculation of the mass of water. Then, we use the balanced equation to determine the mole ratio between hydrogen and water, and finally, use the molar mass of water to calculate the mass of water that forms. The mass of water that forms are 7.56 g.

To know more about hydrogen refer here:

https://brainly.com/question/28937951#

#SPJ11

Mixtures of NaHCO₃ have a variety of applications. Two common uses are as a leavening agent in baking and as an electrolyte in certain sports drinks.

NaHCO₃ also serves as an electrolyte in some sports drinks, which helps to replace minerals lost in sweat during exercise. The electrolyte also helps to regulate fluid balance and muscle contraction.

According to the procedure determination of NaHCO₃, two applications for mixtures of NaHCO₃ are given below: Applications of mixtures of NaHCO₃: Baking soda or NaHCO₃ is a compound that is widely used in the food industry. It is primarily used in the following ways: As a raising agent. As a component of various dry mixtures.

As a treatment for pH-related issues in food items. Acid reflux can be relieved by mixing baking soda and water. Baking soda helps to neutralize the stomach's acidic content, preventing it from causing harm. The following is an example of how to use baking soda for acid reflux: Ingredients: A glass of water A tablespoon of baking soda

Instructions: Add a tablespoon of baking soda to a glass of water.

Read more about the electrolyte here:

https://brainly.in/question/1159049

#SPJ11

The general form of the solubility product constant (Ksp) expression is: Ksp = [A]^m[B]^n. By simply substituting the ion concentrations of the solution into the Ksp expression we can solve the Qsp.

The solubility quotient (Qsp) is similar to Ksp but represents the ion product in a solution, regardless of whether the solution is at equilibrium or not. If Qsp < Ksp, the solution is unsaturated and more solute can dissolve. If Qsp = Ksp, the solution is at equilibrium and the solution is saturated. If Qsp > Ksp, the solution is supersaturated and the excess solute will precipitate out of solution. To calculate Qsp, simply substitute the ion concentrations of the solution into the Ksp expression and solve for Qsp.

To know more about solubility quotient, here

brainly.com/question/28170449

#SPJ4

We need 10 ml of 1 M MgSO₄ to react with 100 ml of 0.1 M Na₂CO₃ and use up both reactants without either being left over.

The scientists produced 3.2 moles (1.93 x 10²⁴ molecules) of NaCl from the reaction of 2Na + Cl₂ ---> 2NaCl by adding 3.2 moles of Cl2 to Na.

Stoichiometry is a branch of chemistry that deals with the quantitative relationships between the reactants and products in a chemical reaction. It involves using the balanced chemical equation to determine the ratio of the amounts of reactants and products involved in a chemical reaction.

1. According to the balanced chemical equation:

MgSO₄ + Na₂CO₃ -> MgCO₃ + Na₂SO₄

The stoichiometric ratio of MgSO₄ to Na₂CO₃ is 1:1. This means that for every 1 mole of MgSO₄, 1 mole of  Na₂CO₃ is required for complete reaction.

Given that we have 100 ml of 0.1 M Na₂CO₃ solution, we can calculate the number of moles of Na₂CO₃:

0.1 M = 0.1 moles/L

0.1 moles/L * 0.1 L = 0.01 moles of Na₂CO₃

To use up all the Na₂CO₃, we need 0.01 moles of MgSO4. We can use the formula conc * volume = moles to calculate the volume of 1 M MgSO4 required:

1 M = 1 mole/L

1 mole/L * 0.01 moles = 0.01 L or 10 ml

2. According to the balanced chemical equation, 2 moles of Na react with 1 mole of Cl₂ to produce 2 moles of NaCl. Therefore, we can find the number of moles of NaCl produced by calculating the limiting reactant, which is the reactant that gets consumed completely and determines the amount of product that can be formed.

The molar ratio of Na to Cl2 in the reaction is 2:1. This means that 1.6 moles of Na was used (since 3.2 moles of Cl2 was added) and that will be the limiting reactant.

Therefore, the number of moles of NaCl produced will be twice the number of moles of Na used. So,

Number of moles of NaCl produced = 2 x 1.6 = 3.2 moles

Since 1 mole of any substance contains Avogadro's number (6.022 x 10²³) of molecules, we can find the number of molecules of NaCl produced by multiplying the number of moles by Avogadro's number:

Number of molecules of NaCl produced = 3.2 x 6.022 x 10²³ = 1.93 x 10²⁴ molecules.

To know more about limiting reactant, visit:

https://brainly.com/question/14225536

#SPJ1

The molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution is 8.72 M.

Molarity is a way to measure the concentration of a solution. It is defined as the number of moles of a substance in a liter of solution. The formula for calculating molarity is:

Molarity = moles of solute / liters of solution

The molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solutionroxide (OH-) in the solution. The molar mass of hydroxide is 17.01 g/mol, so:

moles of OH- = mass of OH- / molar mass of OH-
moles of OH- = 15.6 g / 17.01 g/mol
moles of OH- = 0.916 moles

2. The volume of solution:  

L = ml / 1000
L = 105.0 ml / 1000
L = 0.105 L

3. The molarity of the solution :

Molarity = moles of solute / liters of solution
Molarity = 0.916 moles / 0.105 L
Molarity = 8.72 M

Therefore, the molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution is 8.72 M.

to know more about molarity refer here:

https://brainly.com/question/8732513#

#SPJ11

the molality of solutes in the aqueous solution is 0.182 molal.

⇒m = (molality) = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)

We have to calculate the molality of solutes in the solution by using the freezing-point depression constant and freezing-point depression of the aqueous solution.

Now, Substituting the given values, we get,

⇒ m = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)

⇒ m = 0.34 / (1.86 × w2)

⇒ m = 0.182 molal

Therefore, the molality of solutes in the solution is 0.182 molal.

Learn more about molality: https://brainly.com/question/1370684

#SPJ11

Liquids and gases have some key differences, such as their density, the strength of their forces of attraction, and their viscosity.

Liquids and gases are both physical states of matter and are similar in many ways according to the Kinetic Molecular Theory.

Both states of matter consist of particles that are in constant motion, and this motion is caused by the energy of these particles.

The particles in both liquids and gases have enough energy to move around freely and have very weak forces of attraction between them.

This means that they are both very fluid, and they can take the shape of their containers.

Despite these similarities, liquids and gases also differ in some important ways.

Gas particles have much more kinetic energy than liquid particles, which allows them to move faster and farther apart, making them less dense than liquids.

In addition, the forces of attraction between gas particles are weaker than those between liquid particles, so gas particles are more easily separated and spread out in their environment.

Finally, the viscosity of liquids is greater than the viscosity of gases, so liquids are more resistant to flow.

In conclusion, liquids and gases have many similarities in terms of the Kinetic Molecular Theory. However, they also have some key differences, such as their density, the strength of their forces of attraction, and their viscosity.

to know more about liquid refer here:

https://brainly.com/question/9716973#

#SPJ11

There are approximately 2.60 x 10^24 atoms in 4.31 moles of carbon.

Moles are a unit of measurement used in chemistry to express the amount of a substance. One mole of a substance contains Avogadro's number of particles, which is approximately 6.022 x 10^23 particles. The particles can be atoms, molecules, ions, or any other entity, depending on the substance. To determine the number of atoms in 4.31 moles of carbon, we need to use Avogadro's number, which is defined as 6.022 x 10^23 atoms per mole.

Determine the total number of atoms in 4.31 moles of carbon,

Number of atoms = moles of carbon x Avogadro's number

Number of atoms = 4.31 mol x 6.022 x 10^23 atoms/mol

Number of atoms = 2.60 x 10^24 atoms

To know more about carbon, here

brainly.com/question/17529323

#SPJ4

Answer: The molar concentration of the original perchloric acid is 0.1407 M.

The molar concentration of the original perchloric acid can be calculated using the following equation:
Molarity (M) = moles of solute (n) / volume of solution (V).

In this case, the moles of solute can be found by subtracting the volume of the base (0.43 mL) from the volume of the acid (55.00 mL) giving 54.57 mL of perchloric acid. We can then calculate the moles of solute by multiplying the volume of the acid by its molarity, which is 0.2000 M. Therefore, n = 54.57 mL x 0.2000 M = 10.914 mol.

We can now calculate the molarity of the perchloric acid using the equation M = n/V. V is the total volume of the solution, which is the volume of the acid (55.00 mL) plus the volume of the base (22.67 mL) giving 77.67 mL. Therefore, M = 10.914 mol/ 77.67 mL = 0.1407 M.

In conclusion, the molar concentration of the original perchloric acid is 0.1407 M.


Learn more about molar concentration here:

https://brainly.com/question/15532279#


#SPJ11

The molar concentration of arsenic acid (H₃AsO₄) in an unknown solution is 0.1152 M.

To calculate this, we use the equation:

[H₃AsO₄] = (V₂ × C₂)/V₁

Where V₁ is the volume of the unknown solution (25.00 ml) and V₂ is the volume of KOH (35.21 ml). C₂ is the molar concentration of the KOH (0.1894 M).


By substituting the values into the equation, we get:


[H₃AsO₄] = (35.21 × 0.1894) / 25.00

[H₃AsO₄] = 0.1152 M

Therefore, the molar concentration of arsenic acid (H₃AsO₄) in the unknown solution is 0.1152 M.

To find the molar concentration of the arsenic acid (H₃AsO₄) in an unknown solution, we use the equation [H₃AsO₄] = (V₂ × C₂)/V₁.

In this equation, V₁ is the volume of the unknown solution, V₂ is the volume of KOH, and C₂ is the molar concentration of the KOH. By substituting the values, we get the molar concentration of arsenic acid (H₃AsO₄) in the unknown solution as 0.1152 M.

To know more about arsenic acid click on below link:

https://brainly.com/question/14451856#

#SPJ11

The calculated equilibrium concentration of NH3 is 0.0185 M.

To calculate the equilibrium concentration of NH3 in a mixture of 0.060 M N2 and 0.040 M H2 at a temperature where Kc = 3.5 x 10^-³, we can use the following equilibrium equation:

N2(g) + 3H2(g) ⇌ 2NH3(g)

The balanced equation tells us that for every mole of N2 that reacts, two moles of NH3 will be produced. Similarly, for every three moles of H2 that reacts, two moles of NH3 will be produced. Let's assume that at equilibrium, x moles of NH3 are formed. Then, the equilibrium concentrations of N2, H2, and NH3 will be given as follows:

[NH3] = x M[N2] = (0.060 - x) M[H2] = (0.040 - 3x) M

Now, we can use the equilibrium constant expression (Kc) to solve for x:

Kc = [NH3]2 / [N2][H2]3.5 x 10^-3 = x2 / [(0.060 - x)(0.040 - 3x)3]

On solving the above equation, we get:x = 0.0185 M

Therefore, the equilibrium concentration of NH3 is 0.0185 M.

More on equilibrium concentration: https://brainly.com/question/18366526

#SPJ11

In this type of experiment regardless of starting material, it is unlikely to be a product of the synthesis because it requires a Diels-Alder reaction.

Diels-Alder reaction is not typically observed in these experiments. The Diels-Alder reaction requires the presence of a dienophile and a diene, and the starting material does not contain these molecules. Therefore, it is not possible for the (z,z)-1,4-diphenyl-1,3-butadiene to be a product of the reaction.

A Diels-Alder reaction is a cycloaddition reaction, which requires the participation of two compounds: a dienophile and a diene. A dienophile is a compound that has two double bonds that are ortho, meta, or para to each other, while a diene is a compound that has two double bonds that are conjugated. The starting material in this experiment does not contain a dienophile or a diene, so the Diels-Alder reaction cannot occur.

Therefore, the (z,z)-1,4-diphenyl-1,3-butadiene is not a likely product of the synthesis in this type of experiment regardless of starting material. The presence of the necessary reactants for a Diels-Alder reaction is required for the formation of this product, and the starting material does not contain these molecules.

To know more about the Diels-Alder reaction refer here:

https://brainly.com/question/30751490#

#SPJ11

To dilute a 67.0 ml aliquot of a 0.600 m stock solution to 0.100 m, 402.0 ml of water must be added.

To dilute a 67.0 ml aliquot of a 0.600 m stock solution to 0.100 m, the amount of water to be added can be calculated using the formula: M1V1 = M2V2.

M1 = 0.600 m, V1 = 67.0 ml, M2 = 0.100 m, V2 = Unknown

V2 = (M1V1) / M2

V2 = (0.600 x 67.0) / 0.100

V2 = 402.0

When a stock solution is diluted, it is mixed with a solvent such as water. The amount of solvent (in this case, water) to be added can be calculated using the above formula.

The initial volume (V1) and the concentration (M1) of the stock solution are known, while the final concentration (M2) and the final volume (V2) are unknown.

The formula can be used to calculate the amount of solvent to be added in order to reach the desired concentration.

The initial volume of the stock solution was 67.0 ml, and the initial concentration was 0.600 m. The desired concentration was 0.100 m.

When the formula was used, it was found that 402.0 ml of water must be added in order to reach the desired concentration.

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

Equilibrium points can occur in a wide variety of systems, such as gravitational systems, electric systems, and fluid dynamics systems. The specific conditions required for an equilibrium point to exist will depend on the specific system being considered.

An equilibrium point is a point in a system where the net force acting on an object is zero, and thus the object remains stationary. In the context of particles, an equilibrium point may refer to the point in space where the net force on a particle is zero.

Whether there is a point to the left of the particles where an electron will be in equilibrium depends on the specific system under consideration. For example, in a system with a charged particle and a nearby charged object.

there may be points where the electric field from the charged object and the electric field from the charged particle balance each other, resulting in an equilibrium point where an electron would be stationary.

To know more about equilibrium:

https://brainly.com/question/28899790

#SPJ4

The phrase "survival of the fittest," popularised in Charles Darwin's fifth edition of On the Origin of Species (published in 1869), argued that animals most adapted to their environment have the best chances of surviving.

The environment and its conditions are continually changing, and the fittest individuals must generate even more fit offspring in order to ensure their survival. Here is when evolution comes into play.

An evolutionary mechanism is natural selection. Environment-adapted organisms have a higher chance of surviving and dispersing the genes that contributed to their success.

To know more about Charles Darwin's visit:-

brainly.com/question/13428382

#SPJ9

The ionic charges of cadmium and sulfide in CdS are 2+ and 2- respectively.

An ionic bond is an attraction between two oppositely charged ions. They're commonly made up of metals and nonmetals. The metal gives electrons to the nonmetal in an ionic bond, resulting in a complete outer shell for the nonmetal and a full valence shell for the metal. The result is a tightly bound, crystalline structure. The electrostatic interaction between the ions holds the compound together.

Cadmium (Cd) is a metallic element, and sulfide (S) is a nonmetallic element. CdS is an ionic compound that is created when cadmium cations ([tex]Cd^{2+}[/tex]) and sulfide anions ([tex]S^{2-}[/tex]) combine to form a crystalline lattice structure. The ionic charge of cadmium is 2+, while the ionic charge of sulfide is 2-. Hence, the ionic charges of cadmium and sulfide in CdS are 2+ and 2- respectively.

To know more about ionic bond:

https://brainly.com/question/8286090

#SPJ11

The alcohol that would produce 2,3-dimethylbut-2-ene through dehydration is 2,3-dimethylbutan-2-ol.

Dehydration of an alcohol involves the removal of a molecule of water from the alcohol, resulting in the formation of an alkene. In this case, we are looking for an alcohol that, upon dehydration, will produce 2,3-dimethylbut-2-ene.

The structure of 2,3-dimethylbut-2-ene suggests that it has a branched structure with two methyl groups on the second carbon. This means that the alcohol we need must have this same structure before dehydration.

The alcohol that fits this description is 2,3-dimethylbutan-2-ol. Upon dehydration, this alcohol would lose a molecule of water from the hydroxyl group on the second carbon, resulting in the formation of 2,3-dimethylbut-2-ene. Therefore, the correct answer is 2,3-dimethylbutan-2-ol.

To learn more about methyl groups, refer below:

https://brainly.com/question/13408577

#SPJ11

The partial pressure of gas B in the mixture is 2.49 atm.

To find the partial pressure of gas B in the mixture, we need to use the equation for Dalton's law of partial pressures, which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of each individual gas.

Mathematically, the equation is:

Total pressure = Partial pressure of gas A + Partial pressure of gas B + ... + Partial pressure of gas N

Where N is the total number of gases in the mixture.

We can rearrange this equation to solve for the partial pressure of gas B:

Partial pressure of gas B = Total pressure - Partial pressure of gas A

Substituting the values given in the question, we get:

Partial pressure of gas B = 4.85 atm - 2.36 atm = 2.49 atm

Therefore, the partial pressure of gas B in the mixture is 2.49 atm.

To know more about pressure click here:

brainly.com/question/15175692

#SPJ4

Formic acid (HCOOH), the weak organic acid present in red ants that is responsible again for sting in their bite, with a pH of 2.87 in a 1.35 M solution.

The ph is a useful tool for illustrating how basic or acidic a solution is. By using the inverse logarithm of a hydronium content, or pH = -log[H3O+], we may determine the pH of the solution.

Formic acid has a dissociation constant constant of 1.8 10 4. Formic acid (HCOOH) has a concentration of 0.050 M. [HCOOH] = 0.050 - x, where x is the amount of H+ that separates from HCOOH (formic acid). A 0.050 M strong acid solution has a pH of 2.52.

To know more about organic visit:

https://brainly.com/question/15603370

#SPJ1

[tex]NH_{3}[/tex] has a molar mass of 17 g/mol, so 4.03 moles of [tex]NH_{3}[/tex] would contain 68.51 grams of the compound. Therefore, a cleaning agent containing 4.03 moles of [tex]NH_{3}[/tex] would contain 68.51 grams of the compound.

The given compound is ammonia [tex]NH_{3}[/tex]. [tex]NH_{3}[/tex] is present in a lot of cleaning agents in homes, which makes it an extremely useful compound. It can help to remove stains and dirt from a variety of surfaces. We need to calculate the mass of the ammonia present in the cleaning agent. Here, we have been given that the amount of [tex]NH_{3}[/tex] in the cleaning agent is 4.03 mol.

We can use the molar mass of [tex]NH_{3}[/tex] to convert this into its mass. Molar mass of [tex]NH_{3}[/tex] = 17 g/mol

Formula: Mass (m) = Number of moles (n) x Molar mass (M)

Substituting the values: Mass (m) = 4.03 mol x 17 g/mol = 68.51 g.

Therefore, the mass of [tex]NH_{3}[/tex]in the cleaning agent is 68.51 grams.

For more questions related to molar mass.

https://brainly.com/question/22997914

#SPJ11

Answer: 19.969 moles

Explanation: A mole is a very important unit of measurement that chemists use. A mole of something means you have 602,214,076,000,000,000,000,000 of that thing, like how having a dozen eggs means you have twelve eggs. Chemists have to measure using moles for very small things like atoms, molecules, or other particles.

The fetal death that occurs after the fetus has reached a certain growth that is too large to resorb into the uterus is known as fetus papyraceous.

The fetus is compressed and flattened due to the pressure of the adjacent growing fetus or maternal tissue. The fetus is partially or completely desiccated and flattened, leaving only a parchment-like, thin, and papery skin layer covering the soft tissues.

Fetus papyraceous refers to a dead fetus that has become mummified and flattened into a parchment-like membrane because of compression by an adjacent living fetus or maternal tissue after the death of the other fetus. It is a rare form of fetal death that occurs in multifetal gestations.

To learn more about fetal development refer: https://brainly.com/question/23323442

#SPJ11

The equilibrium equation for the dissolution of potassium chloride (KCl) in water can be represented as:

KCl(s) ⇌ K+(aq) + Cl-(aq)

What is Equilibrium?

In chemistry, equilibrium refers to the state of a chemical reaction where the concentrations of reactants and products no longer change with time. At this stage, the forward and reverse reactions occur at the same rate, resulting in no net change in the concentrations of reactants and products. It is denoted by a double arrow (⇌) between the reactants and products in a chemical equation. The equilibrium point is reached when the rate of the forward reaction equals the rate of the reverse reaction. The equilibrium constant, Keq, is a quantitative measure of the equilibrium concentration of reactants and products.

In this equation, KCl is the solid salt, and the arrow indicates the reversible reaction between the solid and its constituent ions in the aqueous solution. The dissociation of KCl in water results in the formation of potassium ions (K+) and chloride ions (Cl-) in the solution. When the rate of the forward reaction is equal to the rate of the reverse reaction, the solution is said to be in a state of dynamic equilibrium. In a saturated solution of KCl, the concentration of the dissolved ions is at its maximum value at equilibrium, and the undissolved solid salt is in equilibrium with its dissolved ions.

Learn more about  Equilibrium from given link

https://brainly.com/question/517289

#SPJ1

The given amount of acetaminophen in a solution is 0.083 g in 150 ml of buffer solution. To calculate the molar concentration of acetaminophen in the given solution, we need to first find the number of moles of acetaminophen present in the given solution.

SGiven,Mass of acetaminophen (m) = 0.083 gVolume of solution (V) = 150 mL = 0.15 LTo find,Molarity of acetaminophen (M) = ?First, calculate the number of moles of acetaminophen present in the given solution using the formula, moles = mass / molar mass of acetaminophenMolar mass of acetaminophen = 151 g/molNumber of moles of acetaminophen present = 0.083 g / 151 g/mol = 0.00055 mol

Now, calculate the molar concentration of acetaminophen in the given solution using the formula,molarity = moles / volumeMolarity of acetaminophen = 0.00055 mol / 0.15 L= 0.00367 MTherefore, the molar concentration of acetaminophen in the given solution is 0.00367 M.

To know more about moles click on below link :

https://brainly.com/question/20486415#

#SPJ11

Answer:

Na (s) + Cl2 (g) → NaCl (s)

Explanation:

A reaction of sodium with chlorine to produce sodium chloride is an example of a combination reaction. 2 Na + Cl 2 → 2 NaCl.

The empirical formula of aspirin is C₂H₂O.

Based on the mass percent composition given in the student question, we can find the empirical formula of aspirin. First, assume a 100g sample. This means there are 60g of C, 4.48g of H, and 35.52g of O. Next, convert these masses to moles by dividing by the atomic mass of each element:

C: 60g / 12.01g/mol ≈ 5 moles
H: 4.48g / 1.01g/mol ≈ 4.44 moles
O: 35.52g / 16g/mol ≈ 2.22 moles

Now, divide each mole value by the smallest mole value to find the mole ratio:

C: 5 / 2.22 ≈ 2.25 ≈ 2
H: 4.44 / 2.22 ≈ 2
O: 2.22 / 2.22 ≈ 1

Therefore, the empirical formula of aspirin is C₂H₂O.

Know more about  aspirin    here:

https://brainly.com/question/30764511

#SPJ11