Balance the following chemical equation. PC2H6+O2⟶CO2+H2O

Answer: 1 mole 

Explanation:

To synthesize a carboxylic acid from ethyne using the reagents provided, follow these steps: Hydroboration-oxidation, Tautomerization, Nucleophilic addition, Oxidation and Oxidative cleavage.

Hydroboration-oxidation- Reagent 1: Diborane (B2H6); Reagent 2: Hydrogen peroxide (H2O2) and sodium hydroxide (NaOH) Ethyne (C2H2) will undergo hydroboration-oxidation using diborane (B2H6) followed by treatment with hydrogen peroxide (H2O2) and sodium hydroxide (NaOH) to form an alkene (vinyl alcohol) with three bonds to hydrogen and one bond to a hydroxyl group.

Tautomerization- The vinyl alcohol formed in step 1 will undergo tautomerization (keto-enol equilibrium) to form an aldehyde with two carbons. Nucleophilic addition- Reagent 3: n-Propyl Grignard reagent (n-PrMgBr) Add the n-Propyl Grignard reagent (n-PrMgBr) to the aldehyde. This will result in a nucleophilic addition reaction, leading to the formation of a tertiary alcohol with a four-carbon chain.

Oxidation- Reagent 4: Chromic acid (H2CrO4), Oxidize the tertiary alcohol to a ketone using chromic acid (H2CrO4). This will form a ketone with a four-carbon chain. Oxidative cleavage- Reagent 5: Ozone (O3), Reagent 6: Zinc (Zn) and water (H2O), Perform an oxidative cleavage of the ketone using ozone (O3) followed by a reductive workup with zinc (Zn) and water (H2O). This will result in the formation of a carboxylic acid bonded to a four-carbon chain.

To know more about carboxylic acid, refer here:

https://brainly.com/question/29035899#

#SPJ11

89.25 mL of 0.100 M NaCl would be required.

Moles of NaCl in the final solution= (150.0 mL) (0.0595 M NaCl) = 8.925 mmol NaCl

We'll have to use the given 0.100 M NaCl and use its concentration to calculate the amount required to make 8.925 mmol NaCl.

The concentration of NaCl in moles per milliliter is as follows:

The concentration of NaCl in moles per mL = 0.100 M NaCl / 1000 mL/L = 0.0001 moles/mL NaCl

The volume of 0.100 M NaCl that contains 8.925 mmol NaCl is calculated as follows:

The volume of 0.100 M NaCl = (8.925 mmol NaCl) / (0.0001 mol/mL) = 89.25 mL

Therefore, 89.25 mL of 0.100 M NaCl is required to make 0.0595 M NaCl solution when diluted to 150.0 mL with water.

To learn more about solutions refer - https://brainly.com/question/29522675

#SPJ11

Answer: 323 degrees Celsius :)

Explanation:

The specific heat capacity of  the metal is 4.98 J/(kg⋅K).  It would take 46.7 J of energy to raise the temperature of 11.0 g of silver by 18.1 °C.

Specific heat capacity is the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius (or one Kelvin). It is a property of the substance and is usually denoted by the symbol c. The unit of specific heat capacity is J/(kg·K) or J/(kg·°C).

1. The specific heat of the metal can be calculated using the formula:

q = mcΔT

In this case, q = 55.0 J, m = 11.0 g = 0.0110 kg, ΔT = (24.1 - 13.0) = 11.1 °C = 11.1 K.

Substituting these values into the formula, we get:

55.0 J = (0.0110 kg) c (11.1 K)

Solving for c, we get:

c = 4.98 J/(kg⋅K)

Therefore, the specific heat of the metal is 4.98 J/(kg⋅K).

2. First, we need to convert the mass of silver from grams to moles:

n = m/M

where n is the number of moles, m is the mass in grams, and M is the molar mass of silver. The molar mass of silver is 107.87 g/mol, so we have:

n = (11.0 g)/(107.87 g/mol) = 0.102 mol

Substituting the values of m and ΔT, we get:

q = (0.102 mol)(25.35 J/mol⋅∘C)(18.1 ∘C) = 46.7 J

Therefore, it would take 46.7 J of energy to raise the temperature of 11.0 g of silver by 18.1 ∘C.

3. The specific heat of silver can be calculated using the formula:

c = C/M

where c is the specific heat, C is the molar heat capacity, and M is the molar mass.

The molar heat capacity of silver is given as 25.35 J/mol⋅∘C, and the molar mass of silver is 107.87 g/mol.

Converting the molar mass to kilograms per mole, we get:

M = 107.87 g/mol = 0.10787 kg/mol

Substituting the values of C and M, we get:

c = (25.35 J/mol⋅∘C)/(0.10787 kg/mol) = 234.9 J/(kg⋅K)

Therefore, the specific heat of silver is 234.9 J/(kg⋅K).

To find out more about specific heat capacity, visit:

https://brainly.com/question/29766819

#SPJ1

Answer : The percent yield for this reaction " al2(co3)3 ----> al2o3  3co2 " is 84.19%.

When a student decomposes 58.498 grams of aluminum carbonate, and collects gas and measures 27.68 grams of carbon dioxide, the percent yield for this reaction is calculated as follows; First, we find the theoretical yield of CO2 generated from the given Al2(CO3)3 based on stoichiometric calculations as given below;  2Al2(CO3)3 → 4Al + 6CO2 + 3O2Now, the molecular mass of Al2(CO3)3 is calculated as follows: 2(27) + 3(12 + 16x3) = 2(27) + 3(60) = 54 + 180 = 234 g/mol

Thus, the theoretical yield of CO2 generated from 58.498 g of Al2(CO3)3 is given by; moles of Al2(CO3)3 = 58.498 g / 234 g/mol = 0.2496 molTherefore, the moles of CO2 generated = 6 x 0.2496/ 2 = 0.7488 mol

The theoretical yield of CO2 generated from 58.498 g of Al2(CO3)3 is 32.91 g. Accordingly, the percent yield is given by; Percent yield = actual yield / theoretical yield x 100%, Where actual yield = 27.68 g and theoretical yield = 32.91 g. Therefore, Percent yield = 27.68 g / 32.91 g x 100% = 84.19%

Answer : The percent yield for this reaction is 84.19%.

Know more about aluminum carbonate here:

https://brainly.com/question/21544759

#SPJ11

8.88 g is the greatest yield of Na2SO4 that may be produced. As a result of using less NaHCO3 than is required to fully react with the H2SO4, the actual number of NaHCO3 used.

The body requires the base chemical bicarbonate to maintain a healthy acid-base balance. Your body's natural pH balance keeps it from becoming overly acidic, which can lead to a variety of health issues. By eliminating extra acid, the kidneys and lungs maintain a normal blood pH.

Metabolic acidosis is indicated by low blood bicarbonate levels. It is an alkali, the antithesis of acid, and it can counteract acid. Our blood's acidity is kept under control by it.

To know more about Bicarbonate visit:

https://brainly.com/question/8560563

#SPJ1

The hydrogen necessary for this process is ultimately derived from the splitting of carbon dioxide molecules. Yes, the hydrogen necessary for the electron transport chain is derived from the splitting of carbon dioxide molecules in a process known as the Calvin Cycle, or the light-dependent reaction.

In this process, carbon dioxide, water, and light energy are used to create high-energy molecules, such as ATP and NADPH, which are then used in the electron transport chain. During the Calvin cycle, carbon dioxide is reduced by NADPH and ATP to produce a three-carbon molecule called glycerate 3-phosphate.

Hydrogen is removed from glycerate 3-phosphate to create a two-carbon compound known as glyceraldehyde 3-phosphate. This compound is then used to create other compounds, such as glucose, which can be used for energy.

Know more about  electron transport chain  here:

https://brainly.com/question/24372542

#SPJ11

Answer : To prepare 3 mL of 0.24 M sucrose solution from a stock solution of 0.6 M sucrose, 1.2 mL of the stock solution and 1.8 mL of water should be used.

The amount of 0.6 Molar sucrose needed to prepare 3 mL of 0.24 Molar sucrose solution, as well as the volume of water required, can be calculated using the M1V1 = M2V2 formula. Where M1 is the molarity of the stock solution, V1 is the volume of the stock solution required, M2 is the desired molarity of the solution to be prepared, and V2 is the volume of the solution to be prepared.

Given that the stock solution of sucrose is 0.6 M, and we need to prepare 3 mL of a 0.24 M solution, we can use the formula:
0.6 M x V1 = 0.24 M x 3 mL Solving for V1:
V1 = (0.24 M x 3 mL)/0.6 M
V1 = 1.2 mL

This means that 1.2 mL of the stock solution of 0.6 M sucrose is required to prepare 3 mL of 0.24 M sucrose solution.
The volume of water required can be calculated by subtracting the volume of the stock solution from the total volume of the solution to be prepared: Volume of water = 3 mL - 1.2 mL and Volume of water = 1.8 mL

Know more about sucrose solution here:

https://brainly.com/question/3850162

#SPJ11

Generally speaking, a good separation will result when the RF value of the desired compound is within the range of 0.2 to 0.8 in a column chromatography experiment.

The RF value is a ratio of the distance a compound has moved on a chromatogram to the distance the solvent front moved.

The distance a compound travels is measured from the starting point to the centre of the spot. The RF value is used to compare substances and can be used to determine whether two or more compounds are identical.  

The RF value can be influenced by various factors including solvent composition, the type of adsorbent used, and the temperature of the chromatography experiment. The solvent composition is the most important factor that affects the RF value.

The polarity of the solvent used is an important factor, as polar solvents are better at dissolving polar compounds, while nonpolar solvents are better at dissolving nonpolar compounds.

The type of adsorbent used in chromatography is also important, as different adsorbents have different polarities and will attract different compounds differently.

The temperature at which the chromatography is performed is also important, as different compounds have different boiling points and may be affected differently by changes in temperature.

To know more about RF value refer here:

https://brainly.com/question/17796724#

#SPJ11

Answer: The concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm is 1.29 x 10^-5M.

What is the Beer-Lambert law?

The Beer-Lambert law relates the intensity of light absorption to the concentration of the absorbing material present in a sample. According to the Beer-Lambert law, the absorbance of light is directly proportional to the concentration of the absorbing material in the sample and the path length of the light through the sample.

What is the formula to calculate concentration?

The formula to calculate concentration is given as;

C = A/εl

Where,C is the concentration of the sample, A is the absorbance of the sample, ε is the molar absorptivity coefficient of the absorbing material, l is the path length of the light through the sample.

Now, putting the given values in the above formula, we get, C = A/εl

Here,

A = 0.29ε = molar absorptivity coefficient of the absorbing materiall = path length of the light through the sample= 1 cm

So, putting the values in the formula we get,

C = 0.29/(8.6 x 10^3 M^-1cm^-1 × 1 cm)C

= 3.37 x 10^-5 M or 1.29 x 10^-5M (approx)

Hence, the concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm is 1.29 x 10^-5M.


Learn more about concentration here:
https://brainly.com/question/10725862#




#SPJ11

A. The reaction is a neutralization reaction.
B. The reaction is a redox reaction.
C. The reaction is a precipitation reaction.

D. The reaction is a neutralization reaction.

The balanced molecular and net ionic equations are below.

A. Sodium Carbonate and Hydrochloric Acid:

The molecular equation is:

Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂

The net ionic equation is:

2H⁺ + CO₃²⁻ → H₂O + CO₂

This reaction is a neutralization reaction, producing salt and water.

B. Silver Nitrate and Copper:

The molecular equation is:

2AgNO₃ + Cu → 2Ag + Cu(NO₃)₂

The net ionic equation is:

2Ag⁺ + Cu → 2Ag + Cu²⁺

This reaction is a redox reaction, in which copper metal is produced from copper ions.

C. Nickel(II) Bromide and Ammonium Sulfide:

The molecular equation is:

NiBr₂ + (NH₄)₂S → NiS + 2NH₄Br.

The net ionic equation is:

Ni²⁺ + 2Br⁻ + 2NH₄⁺ + S²⁻ → NiS + 2NH₄Br.

This reaction is a precipitation reaction, in which a solid salt is formed.

D. Phosphoric Acid and Barium Hydroxide:

The molecular equation is:

2H₃PO₄ + 3Ba(OH)₂ → Ba₃(PO₄)₂ + 6H₂O

The net ionic equation is:

6H⁺ + 3Ba²⁺ + 6OH⁻ → Ba⁺ + 6H₂O.

This reaction is a neutralization reaction, producing salt and water.

To know more about the neutralization reaction, refer here:

https://brainly.com/question/28970253#

#SPJ11

A volume of 2.28 liters of hydrogen fluoride would be produced by this reaction if 1 gram of fluorine was consumed.

The balanced chemical equation for the reaction:

F₂(g) + H₂O(g) → 2HF(g) + O₂(g)

From this equation, we see that 1 mole of fluorine reacts to form 2 moles of hydrogen fluoride.

The given mass of fluorine is not provided in the question. Let's suppose the mass of fluorine is 1 gram.

To convert 1 gram of fluorine to moles, we will use its molar mass. The molar mass of fluorine is 18.998 g/mol.

Hence,1 g F₂ × (1 mol F2/18.998 g F₂) = 0.0526 mol F₂

Since 1 mole of F2 reacts to form 2 moles of HF, the number of moles of HF produced will be:

0.0526 mol F₂ × (2 mol HF/1 mol F₂) = 0.1052 mol HF

We need to assume some values for pressure and temperature. Let's assume that the pressure is 1 atm and the temperature is 273 K.

We will also need to know the volume of water vapor involved in the reaction.

Let's suppose that the volume of water vapor is 1 L.

Using these assumptions, we can calculate the volume of hydrogen fluoride as follows:

PV = nRT

Where P = 1 atm, V is the volume of HF, n = 0.1052 mol, R = 0.0821 L atm/mol K, and T = 273 K.

Substituting these values, we get:

V = (nRT)/P = (0.1052 mol × 0.0821 L atm/mol K × 273 K)/1 atm = 2.28 L

Therefore, 2.28 liters of hydrogen fluoride would be produced by this reaction if 1 gram of fluorine was consumed.

Learn more about molar mass here:

https://brainly.com/question/837939

#SPJ11

Answer: Among CCl4, CH2Cl2 and ethanol, CH2Cl2 is the molecule that is more soluble in ethanol (CH3CH2OH).

Explanation:

Solubility can be defined as the amount of substance that can dissolve in a solvent. The amount of substance that can be dissolved in a solvent depends on various factors such as the polarity of the molecule and the intermolecular forces acting between the solvent and the solute.

Solvents that have the same polarity will dissolve each other. The polar and nonpolar nature of the molecule will help in deciding its solubility in a solvent.

Ethanol is a polar molecule with a hydroxyl group that can form hydrogen bonds with other molecules. Ethanol can dissolve polar or ionic molecules very well and hence, it is used as a solvent for many applications.

On the other hand, CCl4 is a nonpolar molecule and doesn't dissolve in polar solvents like water. In CCl4, the four chlorine atoms are equally distributed around the carbon atom, giving it a tetrahedral shape. The bond dipoles cancel each other out and hence, the molecule doesn't have a net dipole moment.

CH2Cl2 is a polar molecule with a dipole moment due to the difference in electronegativity between the carbon, hydrogen and chlorine atoms. The C-Cl bond is polar and creates a dipole moment that can interact with the polar solvent, ethanol. Hence, CH2Cl2 is more soluble in ethanol than CCl4.

Learn more about solubility here:

https://brainly.com/question/29661360#


#SPJ11

A good extraction solvent will have the following qualities: Low boiling point, High boiling point, High density, Low density, Solubility in water, Solubility in organic solvents, etc.The incorrect quality listed is high boiling; a good extraction solvent should instead have low selectivity.

Extraction is a technique used to separate a desired substance from a mixture. The method involves dissolving one or more compounds present in a sample into a solvent. Extraction can be used to separate a mixture into its individual components, extract a compound from a sample, or remove impurities from a product.The listed qualities of a good extraction solvent are as follows:

Low boiling point

High boiling point

High density

Low density

Solubility in water

Solubility in organic solvents

Ability to separate from the mixture

A good extraction solvent will have all the qualities listed above except one, which is "high boiling point." A good extraction solvent should have a low boiling point to allow easy separation from the mixture. It should also have high solubility in both water and organic solvents, enabling it to dissolve a wide range of compounds.A good extraction solvent should have high density, enabling it to form a clear layer when mixed with the sample. It should also have low density to enable the separation of the solvent and the extracted compound. Finally, a good extraction solvent should have the ability to separate from the mixture after extraction, which means it should not form an azeotrope with the compound to be extracted.

For more such questions on extraction solvent , Visit:

https://brainly.com/question/25418695

#SPJ11

The complete questions is :

A good extraction solvent will have all the listed qualities except one. which quality listed is incorrect?

The most likely range of values for human body density is 0.900 - 1.100 g/cc.(A)

Option (b) 1.09 - 1.105 g/cc is not the most likely range of values for human body density.

Option (c) 0.99 - 1.02 g/cc and option (d) 1.02-1.08 g/cc are also not the most likely range of values for human body density.

Body density is the mass of the human body divided by the volume it occupies. The density of the human body depends on the mass and volume of the body's internal organs, muscle mass, and the amount of adipose tissue present in the body.

The density of the human body typically ranges from 0.900 g/cc to 1.100 g/cc. This range may vary depending on several factors, including age, gender, body composition, and other health factors.

However, the most likely range of values for human body density is 0.900 - 1.100 g/cc.

To know more about adipose tissue click on below link:

https://brainly.com/question/30782617#

#SPJ11

When hydrochloric acid reacts with barium hydroxide, barium chloride and water are produced. The balanced equation for this reaction is: `HCl + Ba(OH)₂ ⟶ BaCl₂ + H₂O `.

This is a neutralization reaction in which an acid and a base react to form salt and water. The acid in this case is hydrochloric acid and the base is barium hydroxide.

Hydrochloric acid (HCl) is a strong acid, which means that it ionizes completely in water. This means that it dissociates into hydrogen ions (H+) and chloride ions (Cl-) when dissolved in water.

The balanced equation for the ionization of hydrochloric acid is: `HCl + H₂O ⟶ H₃O⁺ + Cl⁻ `Barium hydroxide (Ba(OH)₂) is a strong base, which means that it ionizes completely in water.

This means that it dissociates into barium ions (Ba2+) and hydroxide ions (OH-) when dissolved in water. The balanced equation for the ionization of barium hydroxide is:` Ba(OH)₂ ⟶ Ba²⁺ + 2OH⁻`

When hydrochloric acid and barium hydroxide are mixed together, they react to form barium chloride (BaCl₂) and water (H₂O). The balanced equation for this reaction is:` HCl + Ba(OH)₂ ⟶ BaCl₂ + H₂O`

In this reaction, the hydrogen ion (H+) from the hydrochloric acid combines with the hydroxide ion (OH-) from the barium hydroxide to form water.  

The barium ion (Ba2+) from the barium hydroxide combines with the chloride ion (Cl-) from the hydrochloric acid to form barium chloride.

To know more about Hydrochloric acid refer here:

https://brainly.com/question/14006357#

#SPJ11

(a) We would need 19595.6 J of heat to evaporate 8.66 g of water.

(b) The heat of solution is -3.1 J/mol.

To evaporate 8.66 g of water, we need to use the heat of vaporization for water, which is 2260 J/g.

Therefore, the total amount of heat required to evaporate 8.66 g of water is:

2260 J/g x 8.66 g = 19595.6 J

Therefore,

To find the heat of solution in J/mol, we need to use the formula:

ΔH_solution = -q_solution / n

where;

First, we need to calculate the heat released or absorbed during the solution process, which can be found using the formula:

q_solution = m_solution x C_solution x ΔT

We know that 8 mol of the unknown salt were dissolved in 1.25 g of solution, so the mass of the solute is:

m_solute = n x M

We also know that the temperature of the solution decreased from 25.1 ⁰C to 20.4 ⁰C, so ΔT = 4.7 K.

The specific heat capacity of water is 4.184 J/g·K, so we can assume that the specific heat capacity of the solution is also 4.184 J/g·K.

Therefore, the heat released or absorbed during the solution process is:

q_solution = 1.25 g x 4.184 J/g·K x 4.7 K = 24.8 J

Now we can use this value to calculate the heat of solution:

ΔH_solution = -q_solution / n

= -24.8 J / 8 mol

= -3.1 J/mol

Therefore,  Note that the negative sign indicates that the solution process is exothermic, i.e., heat is released during the process.

Learn more about heat of solution here: https://brainly.com/question/29055794

#SPJ1

The molar mass of the albumin can be calculated by dividing the number of moles (1.08 g) by the molarity (0.0216 mol/L), which yields a molar mass of 49.54 g/mol.

The molar mass of the albumin can be calculated using the given data. First, calculate the molarity of the solution. Molarity = Number of moles/Volume of solution = 1.08 g/50 mL = 0.0216 mol/L.

The osmotic pressure of the solution can be calculated using the Van’t Hoff equation,

which states that osmotic pressure is equal to the molarity multiplied by the universal gas constant (R) multiplied by the temperature (T).

Therefore, osmotic pressure = 0.0216 mol/L × 8.3145 L.atm/mol.K × 298 K = 5.85 mmHg.

The molar mass of the albumin, rearrange the osmotic pressure equation to solve for molarity, molarity = osmotic pressure/RT = 5.85 mmHg/(8.3145 L.atm/mol.K × 298 K) = 0.0216 mol/L.

The molar mass of the albumin can be calculated by dividing the number of moles (1.08 g) by the molarity (0.0216 mol/L), which yields a molar mass of 49.54 g/mol.

The molar mass of the albumin can be calculated by first calculating the molarity of the solution, which is equal to the number of moles divided by the volume of the solution.

The osmotic pressure of the solution can then be calculated using the Van't Hoff equation, which states that osmotic pressure is equal to the molarity multiplied by the universal gas constant and the temperature.

The molar mass of the albumin can then be calculated by rearranging the osmotic pressure equation to solve for molarity and then dividing the number of moles by the molarity. This yields a molar mass of 49.54 g/mol.

to know more about albumin refer here:

https://brainly.com/question/18882874#

#SPJ11

As a result, oxygen exerts a pressure of 0.5 atm.

1013.25 mbar is the atmospheric pressure at sea level (under normal atmospheric circumstances). Here, nitrogen (78.08% vol), oxygen (20.95% vol), argon (0.93% vol), and carbon dioxide (0.040% vol) make up the majority of the dry air.

If nitrogen is responsible for 90% of the total pressure, oxygen is responsible for the remaining 10%.

First, let's calculate the pressure that nitrogen exerts:

Pressure of nitrogen = 90% of total pressure

= 0.9 * 5.0 atm

= 4.5 atm

Now, we can find the pressure exerted by oxygen:

Pressure of oxygen = 10% of total pressure

= 0.1 * 5.0 atm

= 0.5 atm.

To know more about pressure visit:-

https://brainly.com/question/18431008

#SPJ1

AlCl₃ is preferred as a catalyst for Friedel-Crafts Alkylations because it is more stable than FeCl₃.

AlCl₃ is also much easier to handle than FeCl₃ and has a higher boiling point. Additionally, it is less likely to cause a side reaction than FeCl₃ and more likely to produce higher yields.

Therefore, AlCl₃ is the more preferred catalyst when performing Friedel-Crafts Alkylations.

AlCl₃ is a strong Lewis acid, meaning that it can easily accept electrons from other species in order to form a coordinate covalent bond. This allows it to act as a catalyst for Friedel-Crafts Alkylations by providing a Lewis acid environment in which the reaction can take place.

AlCl₃ is less reactive than FeCl₃, which means that it is less likely to cause a side reaction. Additionally, AlCl₃ is more stable than FeCl₃ and has a higher boiling point, making it easier to handle. AlCl₃ is also more likely to produce higher yields when performing Friedel-Crafts Alkylations, making it the preferred catalyst in this reaction.

To know more about Friedel-Crafts Alkylations click on below link:

https://brainly.com/question/30884625#

#SPJ11

The two important quantities for [Fe(NCS)2]2- are its charge, which is -2, and its coordination number, which is 4.

Fe(NCS)22- is a coordination complex with a central iron (II) cation that is surrounded by four water molecules and four bidentate NCS– ligands. It is a red-colored complex that is commonly used to evaluate ligand reactivity and to provide an understanding of the mechanisms of substitution reactions. It is formed by the reaction of FeSO4 with NaSCN in water. The formula for Fe(NCS)22- is Fe(H2O)4(NCS)22-.

The crystal field splitting energy is a measure of the energy difference between the lower and upper d-orbitals of an octahedral complex. This energy is determined by the electronic field that is created by the ligands surrounding the central metal ion. The crystal field splitting energy is an important quantity because it affects the optical and magnetic properties of a coordination complex.

Read more about the complex :

https://brainly.com/question/28007375

#SPJ11

The rate of the reaction between chlorocyclopentane and sodium hydroxide will increase when the concentration of chlorocyclopentane is tripled and the concentration of sodium hydroxide remains the same.

This is due to the fact that increasing the concentration of a reactant increases the frequency of collisions between particles of the reactants, resulting in a higher reaction rate.

When a reactant's concentration is increased, the number of molecules or atoms per unit volume also increases. As a result, the frequency of collisions between the reactant particles increases.

The greater the frequency of collisions between the reactant particles, the greater the chance of a successful reaction, thus increasing the reaction rate.

When the concentration of one of the reactants is increased and the concentration of the other reactant remains the same, the reaction rate increases.

To know more about chlorocyclopentane  click on below link:

https://brainly.com/question/14751180#

#SPJ11

7.14 moles of NH₃ are formed in this reaction. This is about the reaction for the generation of ammonia. 2 moles of ammonia are created when 1 mol of nitrogen gas combines with 3 moles of hydrogen.

N₂ + 3H₂ → 2NH₃

In the query, we were instructed that the surplus is the H₂ hence the N₂ is limiting reagent. We identify the moles that have responded as follows:

N2 mass is 101.7 grams.

N2 has a molar mass of 28.0 g/mol.

H2 is excess.

Molar mass of H2 = 2.02 g/mol

NH3 has a molar mass of 17.03 g/mol.

100 g / 28 g/mol = 3.57 moles

Therefore, If 1 mol of nitrogen gas may make 2 moles of ammonia.

3.57 moles of N₂ must produce (2 * 3.57) / 1 = 7.14 moles of NH₃

Learn more about moles here:

https://brainly.com/question/15521314

#SPJ4

There are approximately 7.15 x 10^21 formula units of CaO present in 0.67 grams of CaO.

Calculate the molar mass of CaO, which is the sum of the atomic masses of calcium and oxygen,

Molar mass of CaO = (1 x atomic mass of Ca) + (1 x atomic mass of O)

Molar mass of CaO = 56.08 g/mol

Convert the given mass of CaO to moles using the molar mass,

Moles of CaO = Mass of CaO / Molar mass of CaO

Moles of CaO = 0.0119 mol

Use Avogadro's number to convert moles of CaO to formula units,

Formula units of CaO = Moles of CaO x Avogadro's number

Formula units of CaO = 0.0119 mol x 6.022 x 10^23 formula units/mol

Formula units of CaO = 7.15 x 10^21 formula units

To know more about formula units, here

brainly.com/question/20704685

#SPJ4

The correct answer is option e) combined gas law.


Boyle's Law states that the pressure of a given mass of an ideal gas held at a constant temperature varies inversely with the volume it occupies. This relationship can be expressed mathematically as PV = k, where k is a constant.

Charles's Law states that at constant pressure, the volume of a given mass of an ideal gas is directly proportional to its temperature. This relationship can be expressed mathematically as V/T = k, where k is a constant.

Gay-Lussac's Law states that at constant volume, the pressure of a given mass of an ideal gas is directly proportional to its temperature. This relationship can be expressed mathematically as P/T = k, where k is a constant.


Avogadro's Law states that the volume of a given mass of an ideal gas is directly proportional to the number of moles of the gas present. This relationship can be expressed mathematically as V/n = k, where k is a constant.


Finally, the Combined Gas Law states that the volume, pressure, and temperature of a given mass of an ideal gas are all related. This relationship can be expressed mathematically as PV/T = k, where k is a constant.

According to the law, volume, and pressure are inversely proportional, while directly proportional to temperature.

Therefore, the law which states that the volume and pressure are inversely proportional, while directly proportional to temperature when moles are held constant is the Combined gas law.

To know more about Combined gas law, refer here:

https://brainly.com/question/13154969#

#SPJ11

Answer:

usually faster. The P-wave is a compressional wave, meaning it is a wave of compression and expansion that travels through the material. It is also known as a primary wave, and it is the fastest type of seismic wave. The S-wave, or secondary wave, is a shear wave, which is a wave that causes the material to oscillate perpendicular to the direction of the wave. The S-wave is usually slower than the P-wave.

The chemoorganotroph and a photoautotroph would not be competing with each other for carbon and light.

The chemoorganotroph is a microorganism which derives its energy from organic compounds. It uses organic carbon as its electron donor and chemical energy source. Chemoorganotrophs can be found in a variety of environments, including soil, water, and the human body.

The photoautotroph is a microorganism that is capable of generating its organic food using sunlight and carbon dioxide. It converts carbon dioxide and water into organic compounds that it uses to create energy through photosynthesis.

Competition is an interaction between two or more organisms or populations that use the same limited resources, resulting in a decrease in the availability of these resources. In this context, chemoorganotrophs and photoautotrophs do not compete for carbon and light.

Therefore, the correct options are (a) carbon and (b) light.

Learn more about chemoorganotroph: https://brainly.com/question/29872582

#SPJ11

The percent yield of the reaction is 80.6%. The actual yield is the amount of product actually obtained from the reaction, usually measured in grams or moles

What is Percentage Yield?

Percentage yield is a measure of the efficiency of a chemical reaction, and it represents the proportion of the actual yield of a product obtained from the reaction compared to the theoretical yield .

The stoichiometry of the sodium borohydride reduction of a ketone like camphor is as follows:

2 R₂C=O + NaBH₄ + 3 H₂O → 2 R₂CHOH + NaBO₂ + 4 H₂

From the balanced equation, we can see that 1 mole of sodium borohydride (NaBH₄) reacts with 2 moles of ketone (R₂C=O). Therefore, the theoretical absolute minimum number of molar equivalents of sodium borohydride required for the reduction is 1 equivalent per mole of ketone.

However, in practice, it is often necessary to use an excess of reducing agent to ensure complete reduction of the ketone. In the question, it is stated that the recommended amount is 5.2 molar equivalents based on past experience.

To calculate the percent yield of the reaction, we need to know the amount of product obtained and the theoretical yield of the product. The theoretical yield is the maximum amount of product that can be obtained based on the amount of limiting reagent used. In this case, the limiting reagent is the ketone, and the theoretical yield can be calculated as follows:

moles of ketone used = (mass of ketone used) / (molar mass of ketone)

theoretical yield of product = 2 x moles of ketone used

Once the actual yield of the product is obtained, the percent yield can be calculated using the formula:

For example, if we use 2 grams of camphor (molar mass 152.23 g/mol) and obtain 1.5 grams of the reduced product, the calculations would be:

moles of camphor used = 2 g / 152.23 g/mol = 0.0131 mol

theoretical yield of product = 2 x 0.0131 mol = 0.0262 mol

% yield = (1.5 g / (0.0262 mol x 88.15 g/mol)) x 100% = 80.6%

Therefore, the percent yield of the reaction is 80.6%.

Learn more about Percentage Yield from given link

https://brainly.com/question/2451706

#SPJ1

The metal hydroxide that should be soluble in water among LiOH, CuOH, AgOH, Cu(OH)₂, and TlOH is LiOH.

1. LiOH: Lithium hydroxide (LiOH) is an alkali metal hydroxide, and alkali metal hydroxides are generally soluble in water. So, LiOH is soluble.

2. CuOH: Copper(I) hydroxide (CuOH) is a transition metal hydroxide, which are typically insoluble. Therefore, CuOH is not soluble.

3. AgOH: Silver hydroxide (AgOH) is also a transition metal hydroxide and is insoluble in water.

4. Cu(OH)₂: Copper(II) hydroxide (Cu(OH)₂) is another transition metal hydroxide and is insoluble in water.

5. TlOH: Thallium hydroxide (TlOH) is also a transition metal hydroxide, and like most transition metal hydroxides, it is insoluble in water.

In conclusion, among the given metal hydroxides, LiOH is soluble in water.

To know more about metal hydroxide, refer here:

https://brainly.com/question/14407261#

#SPJ11