Based on our understanding of our own solar system, what would be most surprising to observe in an extra-solar system of planets?

Tom will strike the floor at a distance of 1.28 m from the edge of the table.

Tom the cat is chasing Jerry the mouse across a table surface that is 1.5 m high. Jerry steps out of the way at the last second, and Tom slides off the edge of the table at a speed of 5 m/s. The position of Tom at different times can be analyzed by applying the kinematic equations. Tom is in free fall and his motion is governed by the equations of motion under gravity. Therefore, his initial velocity is zero, and acceleration due to gravity is -9.8 m/s². Let’s use the second equation of motion to calculate the time required for Tom to hit the ground.
v = u + at Where, v = final velocity = 0 m/s, u = initial velocity = 5 m/s, a = acceleration = -9.8 m/s², t = time taken
Solving for t, we get
0 = 5 + (-9.8)t
t = 0.51 s
Therefore, it takes 0.51 s for Tom to hit the ground. The distance traveled by Tom before hitting the ground can be calculated using the third equation of motion.

s = ut + ½ at² Where, s = distance traveled, u = initial velocity = 5 m/s, a = acceleration = -9.8 m/s², t = time taken = 0.51 s
Solving for s, we get
s = 5 × 0.51 + ½ (-9.8) × (0.51)²
s = 1.28 m
Therefore, Tom will strike the floor at a distance of 1.28 m from the edge of the table. The motion of Tom is an example of projectile motion because he is in free fall and there is no horizontal acceleration acting on him. Projectile motion is a type of motion where an object is thrown near the earth’s surface and moves along a curved path under the action of gravity.

For more such questions on Projectile motion.

https://brainly.com/question/11049671#

#SPJ11

The equation of motion of the center of mass is given by x = v²/(2g).

The center of mass of an object is a point at which the object can be considered to be a particle with its entire mass concentrated at that point.

When an object moves through space, its center of mass also moves. In this question, we are asked to find the equation of motion of the center of mass of the baton when it is thrown vertically upward by a drum major.

The baton has a mass of m and that it is thrown vertically upward with an initial speed of v. The acceleration due to gravity is g.

We can find the maximum height that the baton reaches using the equation:v² = u² + 2gs

where v is the final velocity, u is the initial velocity, g is the acceleration due to gravity, and s is the maximum height that the baton reaches.

Since the baton is thrown vertically upward, the initial velocity is v0 = v and the final velocity is zero. So we have:v² = 2gsor:s = v²/(2g).

We can assume that the center of mass moves in a straight line from its initial position to its maximum height and then back down to its original position.

We can find the time taken for the baton to reach its maximum height using the equation:s = ut + (1/2)at²

where u is the initial velocity, a is the acceleration, and t is the time taken. In this case, u = v, a = -g (since the baton is moving upwards), and s = v²/(2g). So we have:v²/(2g) = vt - (1/2)gt²

Solving for t, we get:t = v/gNow we can write the equation of motion of the center of mass of the baton using the equation:x = ut + (1/2)at².

where x is the position of the center of mass, u is the initial velocity (zero), a is the acceleration due to gravity (g), and t is the time taken. So we have:x = (1/2)gt²

x = (1/2)(v/g)² = v²/(2g)The center of mass of the baton moves up to a maximum height of v²/(2g) and then comes back down to its original position.

Hence, The equation of motion of the center of mass is given by x = v²/(2g).

to know more about center of mass refer here:

https://brainly.com/question/28996108#

#SPJ11

The period of a wave is the time it takes for one complete cycle of the wave to occur. In this case, the wave generator produces one wave every 0.50 seconds. Therefore, the period of the wave is also 0.50 seconds.

Periodic waves are waves that repeat in a regular and predictable pattern over time. The period of a periodic wave is the time it takes for one complete cycle of the wave to occur. It is represented by the symbol "T" and is measured in seconds.

The period of a wave can be determined by measuring the time it takes for two consecutive corresponding points on the wave to pass a given point.

Learn more about waves, here:

https://brainly.com/question/14176146

#SPJ12

If a 21.00-kg child slide from a height of 3.40 m above the bottom of the slide and her speed at the bottom is 2.30 m/s, the amount of energy lost due to friction is 644.18 J.

The potentiаl energy of аn object depends on the locаtion of the object from the bottom reference floor аnd the mаss of the object. The аmount of energy contаins by the object аt аny height is known аs the potentiаl energy of thаt object.

We are given:

The energy of the child at the upper end of the slide is,

[tex]E_{u}[/tex] = mgh

Substitute the values in the above equation

[tex]E_{u}[/tex] = 21 kg × 9.8 m/s2 × 3.40 m

= 699.72 J

The energy at the bottom of the slide is,

[tex]E_{b}[/tex] = [tex]\frac{1}{2}(mv^{2})[/tex]

Substitute the values in the above equation.

[tex]E_{b}[/tex] = [tex]\frac{1}{2}(21.2.30^{2})[/tex]

[tex]E_{b}[/tex] = 55.54 J

The energy lost due to friction is,

[tex]E_{f}[/tex] = [tex]E_{u}[/tex] - [tex]E_{b}[/tex]

Substitute the values in the above equation

[tex]E_{f}[/tex] = 699.72 - 55.54

[tex]E_{f}[/tex] = 644.18 J

Thus, the energy lost due to friction is 644.18 J.

For more information about potentiаl energy refers to the link: https://brainly.com/question/14904642

#SPJ11

The ratio of m1 and m2 is 2.81.

The ratio of m1 and m2 can be calculated using Newton's second law of motion, which states that the force F applied to an object is equal to its mass multiplied by its acceleration: F = m * a.

For the two objects given in the question, we have F = m1 * 7.36 m/s2 and F = m2 * 2.62 m/s2.

Therefore, the ratio of m1 and m2 can be found by dividing the first equation by the second: m1/m2 = (m1 * 7.36 m/s2) / (m2 * 2.62 m/s2). Solving for m1/m2, we get m1/m2 = 2.81.

The ratio of m1 and m2 is equal to 2.81, which can be calculated using Newton's second law of motion. According to the equation, the force F applied to an object is equal to its mass multiplied by its acceleration.

For the two objects in the question, we found the ratio of m1 and m2 to be 2.81.

to know more about ratio refer here:

https://brainly.com/question/13419413#

#SPJ11

The tension in each cable must be equal to the mass of the cargo multiplied by the acceleration due to gravity, and divided by the number of cables.

In order to determine the tension in each cable required to support the cargo in static equilibrium, we can use Newton's Second Law of Motion.

This law states that the sum of the forces acting on an object must be equal to the object's mass multiplied by its acceleration.
The tension in each cable (T) must be equal to the weight of the cargo (W) divided by the number of cables (n).

So the equation would be:  

T = W/n.
To find the value of T, we can use the formula

W = mg

where m is the mass of the cargo and g is the acceleration due to gravity.

Plugging this into the equation for T, we have:

T = mg/n.

for such more question on tension

https://brainly.com/question/24994188

#SPJ11

The chemical energy of the rechargeable battery is reduced by 27 joules when a 3.0 A current is set up in the circuit for 3.0 minutes.

This can be calculated by multiplying the battery's emf, 9.0 V, with the amount of current, 3.0 A, and the time it was set up, 3.0 minutes, to get the amount of electrical energy in joules (J):

E = I x V x t
 = 3.0 A x 9.0 V x 3.0 min
 = 81 J

The chemical energy of the battery can be calculated by subtracting the electrical energy from the total energy of the battery, which is 108 J. Thus, the chemical energy of the battery is reduced by 27 J when the current is set up in the circuit:

E(chemical) = E(total) - E(electrical)
                  = 108 J - 81 J
                  = 27 J

In conclusion, the chemical energy of the battery is reduced by 27 joules when a 3.0 A current is set up in the circuit for 3.0 minutes.

For more such questions on Battery.

https://brainly.com/question/24341906#

#SPJ11

The correct free body diagram that describes the forces on the rock when the string is in one possible horizontal position is B.

As the rock swings in a vertical circle, there are a number of forces acting upon it. These forces are gravity, tension and centrifugal force. When the rock is in a horizontal position, its weight will be perpendicular to the tension force. This makes the tension force the only force acting upon the rock in the horizontal position.

As a result, the correct free body diagram that describes the forces acting on the rock when the string is in one possible horizontal position is B.

Learn more about rock swings at https://brainly.com/question/30065997

#SPJ11

The idealised ammeter and the 3 ohm resistor are connected in series, and they both get the same current. As a result, 2.13 A is likewise the idealized ammeter's reading.

An perfect ammeter's internal resistance is zero, whereas an ideal voltmeter's internal resistance is infinite.

The following formula can be used to get the parallel resistors' equivalent resistance:

1/Req = 1/12 + 1/9

1/Req = 3/36 + 4/36

1/Req = 7/36

Req = 36/7 ≈ 5.14 ohms

Now that the circuit has the equivalent resistance, we can redisplay it:

The circuit's overall current is determined by:

I = V / (Rint + Req)

I = 18 / (3.26 + 5.14)

I ≈ 2.13 A.

To know more about resistor visit:-

https://brainly.com/question/24297401

#SPJ1

When capacitors are connected in series, they have the same charge.

A capacitor is an electrical component that stores energy in an electrical field. Capacitance, measured in farads, is a measure of the capacitor's ability to store charge, and it is determined by the surface area of the conductive plates, the separation between them, and the dielectric constant of the material between them.

When capacitors are connected in series, the charge on each capacitor is the same, since charge conservation demands that the same amount of charge flows into each capacitor.

A common application of series capacitors is to produce a capacitor with a larger voltage rating than any of the individual capacitors. When a voltage V is applied across a set of N identical capacitors connected in series, the voltage across each capacitor is V/N.

The total energy stored in the capacitors is the sum of the energy stored in each capacitor separately: U₍total₎ = 1/2 C₍eq₎ V²

where: C₍eq₎ is the equivalent capacitance of the N capacitors connected in series.

Since the charge on each capacitor is the same, the equivalent capacitance of capacitors in series is given by: 1/C₍eq₎ = 1/C1 + 1/C2 + ... + 1/CN.

To know more about capacitors, refer here:

https://brainly.com/question/17176550#

#SPJ11

Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.

Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.

Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents.  Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.

To learn more about Sportsmanship visit here:

brainly.com/question/9234010

#SPJ4

Answer: Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.

Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.

Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents.  Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.

Explanation: NOT MINE!

CREDITS : contexto1028

Jack does -1967.4 J of work on the boat.

There are four steps to get the final value:

First, we can use the work-energy principle

This states that the net work done on an object is equal to its change in kinetic energy.

We can also use Newton's second law, which relates the net force on an object to its acceleration:

F = ma

where F is the net force acting on the boat,

m is its mass, and

a is its acceleration.

To calculate the net force, we need to add up the individual forces exerted by Jack and Jill:

F= Fjack+ Fjill

where Fjack is the force exerted by Jack, and Fjill is the force exerted by Jill.

The net force can be calculated as:

F = <-440, 0, 220> + <150, 0, 300>

  = <-290, 0, 520> N

Second, The boat's acceleration can be calculated using Newton's second law:

F= ma

a = F / m

a = <-290, 0, 520>  / 3200

a = <-0.0906, 0, 0.1625> m/s^2

Third, The boat's final velocity can be calculated using its initial velocity, its acceleration, and the displacement:

vf^2 = vi^2 + 2ad

where vi is the initial velocity,

a is the acceleration,

d is the displacement, and

vf is the final velocity.

The displacement can be calculated as:

d = |<6, 0, 1>  - <2, 0, 3>

  = |<4, 0, -2>

  = sqrt(4^2 + 0^2 + (-2)^2)

  = 4.47 m

Plugging in the values, we get:

vf^2 = (1.6 )^2 + 2 * (-0.0906 ) * 4.47

= 1.89

= 1.37 m/s

Therefore, the final speed of the boat is 1.37 m/s.

Fourth, To calculate the work done by Jack, we can use the formula:

W = F * d

where F is the force exerted by Jack, and

d is the displacement of the boat.

Plugging in the values:

W = <-440, 0, 220>  * 4.47

W = -1967.4 J

Therefore, Jack does -1967.4 J of work on the boat.

For more reference to work done please refer to:

https://brainly.com/question/13662169

The magnitude of the force on the ball is 8.1e-5 N.

The force on a charged particle moving in a magnetic field is given by the formula:

F = q(v x B)

F = |-3e-6| x |9| x |3| = 8.1e-5 N

Force is a quantitative description of the interaction between objects that causes a change in motion or deformation. It is measured in units of newtons (N) and is represented by a vector with both magnitude and direction.

There are four fundamental forces in nature: gravitational, electromagnetic, strong nuclear, and weak nuclear forces. Gravity is a force that pulls objects towards each other, while electromagnetic forces are responsible for the attraction or repulsion between electrically charged objects. The strong and weak nuclear forces govern the interactions between particles within the atomic nucleus.

To learn more about Force visit here:

brainly.com/question/13191643

#SPJ4

A good relationship must possess the attributes of communication and trust. Without trust, there can be no intimacy, and without communication, there can be no understanding.

This is a true expression of the truth. In order to build a solid and lasting connection between two individuals, communication and trust are essential elements of a good relationship.

Absolutely! Relationships that lack open and honest communication, as well as trust, are likely to be unstable and can lead to misunderstandings, conflicts, and even a breakdown of the relationship over time. Building a strong foundation of trust and communication can help ensure that a relationship can withstand challenges and grow stronger over time.

learn more about good relationship here:

https://brainly.com/question/30155313

#SPJ4

The resistance of the tungsten filament in an 85-watt, 120-volt incandescent light bulb at its operating temperature of about 2800 K is approximately 1.20 Ω.

R = [tex]\frac{V^2}{P}[/tex]

[tex]I = \frac{P}{V} = \frac{85 W}{ 120 V} = 0.708 A[/tex]

The resistivity of tungsten at 20°C is about 5.6 x [tex]10^{-8}[/tex] Ωm.

The cross-sectional area of the tungsten filament can be calculated using the formula:

A = (pi x d²) / 4

where d is the diameter of the filament. Let's assume the diameter of the filament is 0.1 mm (or 1 x [tex]10^{-4}[/tex] m).

A = (pi x (1 x [tex]10^{-4}[/tex])²) / 4 = 7.85 x [tex]10^{-9} m^2[/tex]

R = (rho x L) / A

R = (5.6 x [tex]10^{-8}[/tex] Ωm x 3 x [tex]10^{-2}[/tex] m) / 7.85 x [tex]10^{-9} m^2[/tex] = 0.215 Ω

Now we can calculate the resistance of the tungsten filament at its operating temperature of 2800 K using the formula:

R' = R x (1 + alpha x deltaT)

R' = 0.215 Ω x (1 + 4.5 x [tex]10^{-3} k^{-1}[/tex]x 2507 K) = 1.20 Ω

Resistance arises due to the interactions between charged particles (such as electrons) and the atoms and molecules that make up the material. These interactions cause the charged particles to collide with other particles, and as a result, lose some of their energy, which hinders their flow through the material.

The amount of resistance depends on several factors, including the type of material, its dimensions, and its temperature. Materials that are good conductors of electricity, such as metals, have low resistance, while insulators have high resistance.

Resistance plays an important role in many electrical applications, including the design of electrical circuits and the operation of electronic devices. It can be controlled and manipulated through the use of various components, such as resistors, which are used to regulate the flow of current in a circuit.

To learn more about Resistance visit here:  

brainly.com/question/30799966

#SPJ4

Among the given objects, Jupiter has the smallest radius.

The radius is the distance from the center of a circle or sphere to any point on its perimeter or surface, respectively. We can determine the size of the sphere or circle by calculating its radius.

For the given objects, we can compare their radii to determine which one is the smallest.

The objects are as follows:

a 1.2msun white dwarfa

0.6msun white dwarfw Jupiter

We can compare the radius of these objects as follows:

a 1.2msun white dwarf has a radius of 5,400 kilometers.

a 0.6msun white dwarf has a radius of 3,200 kilometers.

Jupiter has a radius of 69,911 kilometers.

From the above comparison, we can see that Jupiter has the smallest radius.

To know more about Jupiter, refer here:

https://brainly.com/question/10906567#

#SPJ11

The number of turns is 0.305 which means it is not possible to construct a 25.0- cm solenoid of 160mH inductor.

The inductance of a solenoid depends on several factors such as the number of turns of wire, the length of the coil, and the radius of the coil. The equation to calculate the inductance of a solenoid is given as:

L=μοN²A/l

where L is the inductance, μο is the permeability of free space, N is the number of turns, A is the cross-sectional area, and l is the length of the solenoid.

To find the number of turns required to make a 160-mH inductor out of a 25.0-cm-long air-filled solenoid with a diameter of 6.5 cm, we can use the following steps.

First, we need to find the cross-sectional area of the solenoid, A. Since the solenoid is cylindrical, we can use the formula for the area of a circle, A=πr², where r is the radius of the solenoid divided by 2.

A=π(6.5/2)²

A=33.18 cm²

Next, we need to convert the length of the solenoid from centimeters to meters, l.

l=25.0 cm×(1 m/100 cm)l=0.25 m

Now we can substitute the values we found into the equation for inductance and solve for the number of turns, N.

L=μοN²A/l

160×10⁻³ H=(4π×10⁷ H/m×N²×33.18×10⁻⁴m²) / 0.25

0.0959=N²

N=√(0.0959)

N=0.306 turns

As we can see from the calculation above, the number of turns required to make a 160-mH inductor out of a 25.0-cm-long air-filled solenoid with a diameter of 6.5 cm is 0.306 turns. However, this answer does not make sense because it is not possible to have a fractional number of turns.

Therefore, we must conclude that the solenoid is not practical for use as an inductor, and we should use a different type of coil or adjust the parameters of the solenoid to make it practical for use as an inductor.

To know more about the solenoid, refer here:

https://brainly.com/question/15504705#

#SPJ4

When a compressed spring is pushing a block across a rough horizontal table, a free-body diagram shows four force vectors. They are named weight, normal force, the force of friction, and the force of the spring.

What are the four force vectors?

Weight: It is the gravitational force of attraction that the earth exerts on an object. Its direction is always down.

Normal force: It is the force exerted by the surface of the object on which the other object rests. Its direction is always perpendicular to the surface.

The force of friction: It is the force that opposes the motion of the object on the surface due to the microscopic interaction between the surfaces of the two objects. Its direction is always opposite to the direction of the object's motion.

The force of the spring: It is the force exerted by the spring on the object, and its direction is always in the opposite direction of the spring's compression.

To know more about force vectors:

https://brainly.com/question/13492374?referrer=searchResults

#SPJ11

The beat frequency for two tuning forks producing sounds of wavelength  3.4 meters and 3.3 meters is 3 Hz.

Beat frequency is the difference between the frequencies of the two tuning forks:

beat frequency = |[tex]frequency_{1} - frequency_{2}[/tex]|

We know that wavelength = speed of sound / frequency,

so we can rearrange the formula to get:

frequency = speed of sound / wavelength

Using a speed of sound of approximately 343 m/s (at room temperature), we get:

[tex]frequency_{1}[/tex]= 343 / 3.4 = 100.88 Hz

[tex]frequency_{2}[/tex]= 343 / 3.3 = 103.94 Hz

Taking the difference and rounding to the nearest Hz, we get:

|100.88 - 103.94| ≈ 3 Hz

Therefore, the approximate beat frequency produced is 3 Hz.

To Practice more questions about 'beat frequency':

https://brainly.in/question/54417215

#SPJ11

The net force on a 30.0 nc charge located at the origin by two other charges is the vector sum of the forces exerted by the two other charges. The force exerted by the first charge, -50.0 nC located at (-5.0 m, 2.0 m), is given by:

F1 = (k*q1*q2)/r2, where

Therefore,

F1 = (8.99 x 109 N m2/C2)*(-50.0 nc)*(30.0 nc)/(5.3852) = 2.38 x 10-2 N

Similarly, the force exerted by the second charge, 40.0 nc located at (3.0 m, 1.0 m), is given by:

F2 = (k*q1*q2)/r2, where

Therefore,

F2 = (8.99 x 109 N m2/C2)*(40.0 nc)*(30.0 nc)/(3.1622) = 4.58 x 10-2 N

The net force is the vector sum of F1 and F2 and can be calculated as follows:

F net = F1 + F2 = 2.38 x 10-2 N + 4.58 x 10-2 N = 7.00 x 10-2 N

Therefore, the net force on a 30.0 nc charge located at the origin by two other charges is 7.00 x 10-2 N.

To know more about Force refer here:

https://brainly.com/question/13191643#

#SPJ11

Two forces act on a monkey hanging stationary by a vertical vine: gravity and the tension of the vine. Gravity is the greater force in this situation because it is a constant force that acts downwards.

The two forces that act on a monkey hanging stationary by a vertical vine are tension and gravity. The tension force acts along the vine and pulls the monkey upwards, while the gravity force acts downwards towards the center of the Earth.
If the monkey is stationary, then the two forces are equal in magnitude and opposite in direction. This is because the tension force is balancing the gravity force, resulting in no net force acting on the monkey.

Therefore, if neither of the forces are greater than the other as they are equal in magnitude and opposite in direction.What is tension force?The force exerted by a string, rope, chain, or similar object on another object that it is connected to is referred to as tension. The tension is always directed along the length of the string and away from the object's surface that the string is attached to. When an object is suspended from a rope, the tension force on the rope is equal to the weight of the object (due to gravity), and this tension force is transmitted through the rope to any other objects that the rope is attached to.

For more details about gravity, click on the below link:

https://brainly.com/question/13634821

#SPJ11

Answer:

A

Explanation:

It is based on the theory of J. J. Thomson

Light is radiant energy in the form of a wave of electromagnetic energy.

Light is a form of electromagnetic radiation that is visible to the human eye. It is made up of a stream of energy particles, called photons, that travel in a wave-like pattern. It has various properties, including intensity, color, and direction, which can be used to explain its behavior. It can be described as having both a particle-like nature and a wave-like nature. The particle-like nature of light is exhibited in the way it travels in packets of energy, known as photons. The wave-like nature of light is demonstrated by the way it can be bent, diffracted, and refracted.
The intensity of light is determined by the amount of energy that a photon has. The color of light is determined by the wavelength of the light, with different colors having different wavelengths. Direction is also an important property of light, as it determines how light will be bent when it passes through an obstacle or is reflected off of a surface.
Light plays a critical role in the lives of humans and other organisms. It is used in vision, to help organisms understand the world around them. Light also has numerous applications in science and technology, such as in communications, photography, and solar energy.
In conclusion, light is a form of electromagnetic radiation composed of photons that travel in a wave-like pattern. It has various properties, including intensity, color, and direction, that are used to explain its behavior. Light is important for vision and has various uses in science and technology.

For more such questions on Light.

https://brainly.com/question/13777321#

#SPJ11

In parallel circuits, when all resistors are of equal value, the total resistance is equal to the value of one individual resistor  C. divided by the number of resistors.

The electrical circuits come in two primary forms - series and parallel. A parallel circuit is defined as a circuit in which the resistors are arranged in a way that they have the same potential difference or voltage across them. This implies that every component of the circuit gets the same amount of voltage. The basic principle of a parallel circuit is that every resistor gets the same amount of voltage.

When the voltage of the circuit is calculated, each component of the circuit has the same voltage. The voltage rating of each component is identical in a parallel circuit. According to Ohm's law, the resistance in a parallel circuit is inversely proportional to the current. The more the number of resistors in the circuit, the smaller the resistance of the circuit.

This means that the total resistance of a parallel circuit is always less than the resistance of the smallest resistor in the circuit. Therefore, when all the resistors are of equal value, the total resistance is equal to the value of one individual resistor divided by the number of resistors. In other words, R(total) = R(1) / n, where n is the number of resistors. Therefore the correct option is C

Know more about  Ohm's law here:

https://brainly.com/question/796939

#SPJ11

On the surface of Jupiter, you would have the largest acceleration as it has the largest gravity, where a body with mass 50kg and force 100 N would experience an acceleration equal to 2 m/s². in general.

We are given that,

Force, F = 100N

Mass, m = 50 kg

According to Newton's second law of motion, force is gievn as the product of mass and acceleration, thus:

Acceleration, a = F/m

= 100/50

=2 m/s².

Thus, in general, an object with mass 50 kg and force applied as 100 N would have an acceleration equivalent to 2m/s².

On Earth, the gravitational force of the planet causes falling objects to accelerate by 9.8 m/s2, or 1 g. The best approach to explain the gravitational force on other planets is to express it as a percent of Earth's g-force.

As the largest planet, Jupiter should have the strongest gravitational pull, and this is really the case. Thus, an object would face the largest acceleration due to gravity on the planet Jupiter.

To know more about acceleration, refer:

https://brainly.com/question/25256383

#SPJ4

Different wavelengths of the electromagnetic spectrum can be used to gain information about distances and properties of components in the universe through various astronomical observations and measurements.

What is Electromagnetic Spectrum?

The electromagnetic spectrum is a range of all the types of electromagnetic radiation, which includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. It encompasses all the wavelengths and frequencies of electromagnetic radiation.

For example, visible light, which is a small portion of the electromagnetic spectrum, is used to observe the visible features of celestial bodies such as stars, planets, and galaxies. By analyzing the brightness, color, and spectrum of visible light emitted or reflected by these objects, astronomers can learn about their temperature, composition, and motion.

Infrared radiation, which has longer wavelengths than visible light, can penetrate through the interstellar dust and gas that block visible light. This allows astronomers to study the hidden regions of the universe, such as the centers of galaxies and the early universe, and detect cold objects like protestors and dust clouds.

Learn more about  Electromagnetic Spectrum from given link

https://brainly.com/question/2261239

#SPJ1

Steam, Heat Exchange, Natural Gas, Throttle The steam is extracted between the high and low pressure turbines at a pressure to be determined, which is then isobarically heat exchanged with the process hot water, exiting the heat exchanger as a saturated liquid. This liquid is then throttled to the condenser pressure and mixed with the fluid exiting the low-pressure turbine.

To calculate the power output of the system, the energy and mass balances for the process must be established. These balances can be used to calculate the mass flow rate of the natural gas, the mass flow rate of the steam, the heat input and the power output. In addition, the properties of the natural gas can be used to calculate the enthalpy of the inlet gas, the enthalpy of the steam, and the enthalpy of the inlet air.

The energy balance equation states that the total energy entering the system is equal to the total energy leaving the system. The mass balance equation states that the total mass entering the system is equal to the total mass leaving the system. From these two equations, the enthalpy of the steam and the mass flow rate of the natural gas can be calculated.

The heat input to the system is equal to the total enthalpy of the steam plus the enthalpy of the natural gas. The power output of the system is equal to the heat input multiplied by the efficiency of the generator. This can be used to calculate the power output of the system.

For more similar questions on energy systems,

brainly.com/question/2003548

#SPJ11

The vertical speed of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating depends on both the wave speed and the amplitude of the transverse wave.

The transverse wave and wave speed for vertical speed of a segment also depends on factors like:

        where 'A' is the amplitude of the transverse wave,

        'ω' is the angular frequency of the wave,

         't' is the time, and

        'cos' is the cosine function.

        where 'T' is the tension in the string and

         'u' is the mass per unit length of the string.

So while the wave speed does not directly determine the vertical speed of a segment of the string, it does affect the angular frequency of the wave (which is related to the wave speed) and thus indirectly affects the vertical speed of a segment of the string through the amplitude of the wave.

To learn more about the 'transverse wave':

https://brainly.com/question/2270715

#SPJ11

The observed wavelength of the photon is 572.11 nanometers.

The formula for the Doppler effect for a moving source is:

f' = f(1 - v/c)

λ' = λ(1 - v/c)

where λ is the wavelength of the emitted photon, and λ' is the observed wavelength.

Substituting the given values, we have:

λ' = 571.43 nm (1 - 486 km/s / 299792.458 km/s)

λ' = 572.11 nm

Wavelength is a fundamental concept in physics that refers to the distance between two adjacent peaks or troughs in a wave. It is usually denoted by the symbol lambda (λ) and is measured in meters (m) or other units of length.

Wavelength is a characteristic property of all types of waves, including electromagnetic waves such as light and radio waves, as well as mechanical waves like sound waves. In general, waves with shorter wavelengths have higher frequencies and carry more energy, while waves with longer wavelengths have lower frequencies and carry less energy. The concept of wavelength is important in many areas of physics, including optics, acoustics, and quantum mechanics. It plays a critical role in the study of wave-particle duality, diffraction, interference, and resonance phenomena.

To learn more about Wavelength visit here:

brainly.com/question/4112024

#SPJ4

The choices below correctly lists things in order from largest to smallest, is D) universe, local group, milky way, solar system.

The universe is the largest structure in existence, followed by the local group of galaxies (which contains our Milky Way), followed by the milky way itself, and finally the solar system which is the smallest structure.

In terms of scale, the universe is far larger than any other structure, containing billions of galaxies and stars within it. The local group is a cluster of galaxies containing around 54 galaxies, of which our milky way is one. The milky way is itself a large collection of stars and planets, including our solar system which contains the planets and moons of our own solar system. So, in summary, the correct ordering from largest to smallest is Universe, Local Group, Milky Way, Solar System.

Learn more about solar system at:

https://brainly.com/question/3453959

#SPJ11