Answer: Therefore, 70.7 mL of 9.89 M nitric acid solution should be used to prepare 3.50 L of 0.200 M HNO3.
Explanation:
To prepare 3.50 L of 0.200 M HNO3, we need to calculate the amount of HNO3 required and then determine the volume of 9.89 M nitric acid solution needed to prepare this amount of HNO3.
The amount of HNO3 required can be calculated using the formula:
amount of HNO3 (in moles) = volume of solution (in liters) x concentration of HNO3 (in moles per liter)
Substituting the given values:
amount of HNO3 = 3.50 L x 0.200 mol/L = 0.700 mol
Now, we can use the amount of HNO3 and the concentration of the nitric acid solution to calculate the volume of the nitric acid solution needed:
volume of nitric acid solution = amount of HNO3 (in moles) / concentration of nitric acid solution (in moles per liter)
Substituting the given values:
volume of nitric acid solution = 0.700 mol / 9.89 mol/L = 0.0707 L
Finally, we can convert the volume to milliliters:
volume of nitric acid solution = 0.0707 L x 1000 mL/L = 70.7 mL
Therefore, 70.7 mL of 9.89 M nitric acid solution should be used to prepare 3.50 L of 0.200 M HNO3.
Regenerate response
A bottle of nail polish remover containing ethyl acetate was spilled in an unventilated room measuring 9.00 m × 6.00 m × 3.00 m. After some time had passed, it was determined that 8.701 g of ethyl acetate had evaporated. Calculate the concentration of ethyl acetate in milligrams per cubic meter.
Answer:
53.69 mg/m³
Explanation:
To calculate the concentration of ethyl acetate in milligrams per cubic meter, we need to know the total volume of the room and the amount of ethyl acetate that evaporated in grams.
The total volume of the room is:
V = l x w x h
V = 9.00 m x 6.00 m x 3.00 m
V = 162.00 cubic meters
To convert the amount of ethyl acetate evaporated from grams to milligrams, we multiply by 1000:
amount of ethyl acetate = 8.701 g = 8,701 mg
Now we can calculate the concentration of ethyl acetate in milligrams per cubic meter:
concentration = amount of ethyl acetate / volume of room
concentration = 8,701 mg / 162.00 cubic meters
concentration = 53.69 mg/m³
Therefore, the concentration of ethyl acetate in the unventilated room is 53.69 mg/m³.
Give the mechanism for the reaction:
The reaction of 2-Bromo-2-Ethyl-3-Methylbutane with methanol is an example of a nucleophilic substitution reaction.
What is the mechanism of the reaction?In this reaction, the methanol molecule acts as a nucleophile and attacks the carbon atom of the bromoalkane, resulting in the displacement of the leaving group (bromine) and the formation of a new carbon-oxygen (C-O) bond.
The reaction mechanism can be described as follows:
Protonation: In the first step, the methanol molecule acts as a base and abstracts a proton from the sulfuric acid catalyst to form the methoxide ion (CH3O-).
Nucleophilic attack: The methoxide ion then attacks the carbon atom of the bromoalkane, which is electrophilic due to the electron-withdrawing effect of the bromine atom. The attack results in the formation of a transition state in which the carbon-bromine bond is weakened and the carbon-oxygen bond is forming.
Elimination: The transition state then collapses to form the product, methylethylmethylcarbinol, with the simultaneous loss of the bromide ion. This step is known as the elimination step and occurs as the newly formed C-O bond is more stable than the weakened C-Br bond.
Learn more about reaction mechanism:https://brainly.com/question/26690612
#SPJ1
The volume of a gas is 200 mL at 350.0 kPa pressure. What will the volume be when the pressure is reduced to 125.0 kPa, assuming the temperature remains constant.
The volume of the gas will be 560 mL when the pressure is reduced to 125.0 kPa, assuming the temperature remains constant.
What will be the volume of the gas when the pressure is reduced to 125.0 kPa?Boyle's law simply states that "the volume of any given quantity of gas is inversely proportional to its pressure as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Where P₁ is Initial Pressure, V₁ is Initial volume, P₂ is Final Pressure and V₂ is Final volume.
Substituting the given values, we get:
P₁ = 350.0 kPa (initial pressure)
V₁ = 200 mL (initial volume)
P₂ = 125.0 kPa (final pressure)
V₂ = ?
Solving for V₂, we get:
V₂ = ( P₁ × V₁ ) / P₂
V₂ = (350.0 kPa × 200 mL) / 125.0 kPa
V₂ = 560 mL
Therefore, the final volume of the gas is 560 mL.
Learn more about Boyle's law here: brainly.com/question/1437490
#SPJ1
uestion 8 Calculate the percentage by mass of hydrogen in PtCl2(NH3)2 A. 1.558 B. 1.008 c.0.672 D. 0.034 E.2.016
The percentage by mass of hydrogen can be calculated from the problem as 2.016
How do you calculate the mass percent of an atom in a compound?To calculate the mass percent of an atom in a compound, you first need to determine the molar mass of the compound and the molar mass of the atom of interest.
Determine the molar mass of the compound by adding up the atomic masses of all the atoms in the compound.
Determine the number of moles of the atom of interest in one mole of the compound. This is done by dividing the atomic mass of the atom by the molar mass of the compound.
We know that the relative molecular mas of the compound is; 300 g/mol
Then;
Percent by mass of hydrogen is; 6/300 * 100/1
= 2.016%
Learn more about percent by mass:https://brainly.com/question/5394922
#SPJ1
Alexander, who weighs 180 lb , decides to climb Mt. Krumpett, which is 5620 m
high. For his food supply, he decides to take nutrition bars. The label on the bars states that each 100-g bar contains 10 g of fat, 40 g of protein, and 50 g of carbohydrates. One gram of fat contains 9 Calories, whereas each gram of protein and carbohydrates contains 4 Calories.
To determine how much food to bring, Alexander will need to take into account the energy required to climb the mountain. Gravitational potential energy is the energy stored in an object that is raised to a height. The gravitational potential energy is related to an object's mass m, the height h to which it is raised, and the acceleration due to gravity, g. The relationship is given by E=m⋅g⋅h
The value of g near Earth's surface is 9.81m/s2.
Alexander wants to know exactly how many bars to pack in his backpack for the journey. To provide a margin of safety, he assumes that he will need as much energy for the return trip as for the uphill climb. How many bars should Alexander pack?
Answer: Brainlest Please!
Explanation:
To determine how many bars Alexander should pack, we first need to calculate the energy required for the uphill climb and the return trip. We can use the formula for gravitational potential energy to calculate this:
Energy required = m * g * h
where m is the mass of Alexander and his backpack, g is the acceleration due to gravity, and h is the height of the mountain.
First, we need to convert Alexander's weight from pounds to kilograms:
180 lb * (1 kg / 2.205 lb) = 81.65 kg
Assuming Alexander's backpack weighs 10 kg, his total mass is:
m = 81.65 kg + 10 kg = 91.65 kg
Next, we need to convert the height of the mountain from meters to joules:
5620 m * 91.65 kg * 9.81 m/s^2 = 5,029,669 J
Since Alexander assumes he will need as much energy for the return trip, the total energy required is:
2 * 5,029,669 J = 10,059,338 J
Now, we can calculate the number of bars required to provide this amount of energy.
Each bar weighs 100 g, and contains 10 g of fat, 40 g of protein, and 50 g of carbohydrates.
First, we need to calculate the total energy per bar:
10 g of fat * 9 Cal/g + 40 g of protein * 4 Cal/g + 50 g of carbohydrates * 4 Cal/g = 410 Cal
Next, we can calculate the number of bars required:
10,059,338 J * (1 Cal / 4.184 J) * (1 bar / 410 Cal) = 605 bars
Therefore, Alexander should pack approximately 605 nutrition bars for his trip up and down Mt. Krumpett.
!!(100 points)!! Identify the number of electrons each of the following atoms needs to gain or lose to have a stable outer electron configuration: Sodium(Na), Sulfur(S), Strontium(Sr)
Answer: See below
Explanation:
Sodium (Na) - 1 electron on outer shell so would need to lose 1 electron for a full outer shell - making it a 1+ ion
Surfur (S) - 6 electrons on outer shell so would need to gain 2 electrons for a full outer shell - making it a 2- ion
Strontium (Sr) - 2 electrons on outer shell so would need to lose 2 electrons for a full outer shell - making it a 2+ ion
Sheila spilled tea on her notes and is now unable to read some words.
What is the correct title for this section of Sheila's notes?
Volume
Density
Weight
Mass
Based οn the wοrds prοvided, a pοssible title fοr this sectiοn οf Sheila's nοtes cοuld be Mass.
What are Prοperties οf Matter in chemistry?In chemistry, prοperties οf matter refer tο the characteristics οr attributes that can be used tο describe and identify a substance. These prοperties can be divided intο twο categοries: physical prοperties and chemical prοperties.
Physical attributes are thοse that can be examined οr measured withοut changing the substance's makeup. Mass, vοlume, density, cοlοr, melting pοint, bοiling temperature, and sοlubility are examples οf physical qualities.
Chemical prοperties, οn the οther hand, describe hοw a substance interacts with οther substances tο prοduce new substances.
Understanding the prοperties οf matter is impοrtant in chemistry because it allοws scientists tο identify and classify different substances based οn their unique characteristics. This knοwledge can alsο be used tο predict hοw substances will behave under different cοnditiοns and tο design new materials with specific prοperties fοr variοus applicatiοns.
To learn more about Density, visit:
https://brainly.com/question/26364788
#SPJ1
Complete question:
Sheila spilled tea on her notes and is now unable to read some words.
What is the correct title for this section of Sheila’s notes?
Volume Density Weight MassConservation of Mass In chemical reactions, mass is neither gained nor lost. The total mass of all the reactants equals the total mass of all the products. Atoms are just rearranged into different compounds. Using this idea, solve the following problems. 1. 2KCIO3 2KCI+ 30₂ If 500 g of KCIO, decomposes and produces 303 g of KCI, how many grams of O₂ are produced? 2. N₂ + 3H₂ 2NH3 How many grams of H₂ are needed to react with 100 g of N₂ to produce 121 g of NH₂? 3. 4Fe +30₂ 2Fe₂O3 How many grams of oxygen are needed to react with 350 g of iron to produce 500 g of Fe₂O3? 4. CH₂ + 20₂2 CO₂ + 2H₂O 16 g of CH₂ react with 64 g of O₂, producing 44 g of CO₂ How many grams of water are produced? 5. CaCO3 Cao + CO, How much CO, is produced from the decomposition of 200 g of CaCO, if 112 g of CaO are produced?
Answer:
1. The balanced equation is 2KCIO3 → 2KCI + 3O2. According to the law of conservation of mass, the mass of the reactants must equal the mass of the products. Therefore, the mass of oxygen produced is:
Mass of oxygen = Mass of KCIO3 - Mass of KCI
Mass of oxygen = 500 g - 303 g
Mass of oxygen = 197 g
Therefore, 197 g of O2 are produced.
2. The balanced equation is N2 + 3H2 → 2NH3. We need to find out how much H2 is needed to react with 100 g of N2 to produce 121 g of NH3. First, we need to calculate the number of moles of N2 and NH3:
Moles of N2 = Mass of N2 / Molar mass of N2
Moles of N2 = 100 g / 28 g/mol
Moles of N2 = 3.57 mol
Moles of NH3 = Mass of NH3 / Molar mass of NH3
Moles of NH3 = 121 g / 17 g/mol
Moles of NH3 = 7.12 mol
According to the balanced equation, 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3. Therefore, the number of moles of H2 needed is:
Moles of H2 = Moles of N2 x (3/1)
Moles of H2 = 3.57 mol x 3
Moles of H2 = 10.71 mol
Finally, we can calculate the mass of H2 needed:
Mass of H2 = Moles of H2 x Molar mass of H2
Mass of H2 = 10.71 mol x 2 g/mol
Mass of H2 = 21.42 g
Therefore, 21.42 g of H2 are needed.
3. The balanced equation is 4Fe + 3O2 → 2Fe2O3. We need to find out how much oxygen is needed to react with 350 g of Fe to produce 500 g of Fe2O3. First, we need to calculate the number of moles of Fe and Fe2O3:
Moles of Fe = Mass of Fe / Molar mass of Fe
Moles of Fe = 350 g / 55.85 g/mol
Moles of Fe = 6.26 mol
Moles of Fe2O3 = Mass of Fe2O3 / Molar mass of Fe2O3
Moles of Fe2O3 = 500 g / 159.69 g/mol
Moles of Fe2O3 = 3.13 mol
According to the balanced equation, 4 moles of Fe react with 3 moles of O2 to produce 2 moles of Fe2O3. Therefore, the number of moles of O2 needed is:
Moles of O2 = Moles of Fe x (3/4)
Moles of O2 = 6.26 mol x (3/4)
Moles of O2 = 4.69 mol
Finally, we can calculate the mass of O2 needed:
Mass of O2 = Moles of O2 x Molar mass of O2
Mass of O2 = 4.69 mol x 32 g/mol
Mass of O2 = 150.08 g
Therefore, 150.08 g of O2 are needed.
4. The balanced equation is CH2 + 2O2 → CO2 + 2H2O. We know that 16 g of CH2 reacts with 64 g of O2 to produce 44 g of CO2. We need to find out how much water is produced. First, we need to calculate the number of moles of CH2 and CO2:
Moles of CH2 = Mass of CH2 / Molar mass of CH2
Moles of CH2 = 16 g / 14 g/mol
Moles of CH2 = 1.14 mol
Moles of CO2 = Mass of CO2 / Molar mass of CO2
Moles of CO2 = 44 g / 44 g/mol
Moles of CO2 = 1 mol
According to the balanced equation, 1 mole of CH2 reacts with 2 moles of O2 to produce 2 moles of H2O. Therefore, the number of moles of H2O produced is:
Moles of H2O = Moles of CH2 x (2/1)
Moles of H2O = 1.14 mol x 2
Moles of H2O = 2.28 mol
Finally, we can calculate the mass of H2O produced:
Mass of H2O = Moles of H2O x Molar mass of H2O
Mass of H2O = 2.28 mol x 18 g/mol
Mass of H2O = 41.04 g
Therefore, 41.04 g of H2O are produced.
5. The balanced equation is CaCO3 → CaO + CO2. We need to find out how much CO2 is produced from the decomposition of 200 g of CaCO3 if 112 g of CaO are produced. First, we need to calculate the number of moles of CaCO3 and CaO:
Moles of CaCO3 = Mass of CaCO3 / Molar mass of CaCO3
Moles of CaCO3 = 200 g / 100.09 g/mol
Moles of CaCO3 = 1.999 mol
Moles of CaO = Mass of CaO / Molar mass of CaO
Moles of CaO = 112 g / 56.08 g/mol
Moles of CaO = 1.999 mol
According to the balanced equation, 1 mole of CaCO3 produces 1 mole of CaO and 1 mole of CO2. Therefore, the number of moles of CO2 produced is:
Moles of CO2 = Moles of CaCO3 x (1/1)
Moles of CO2 = 1.999 mol
Finally, we can calculate the mass of CO2 produced:
Mass of CO2 = Moles of CO2 x Molar mass of CO2
Mass of CO2 = 1.999 mol x 44 g/mol
Mass of CO2 = 87.96 g
Therefore, 87.96 g of CO2 are produced.
NEEDD HELP URGENTLY, NOBODY ELSE IS HELPING FFS
2.0 mol of Ca(OH)2 are mixed with 2.0 mol of HCl according to the following equation:
Ca(OH)2+2HCl=CaCl2+2H2O
a. Which chemical is in excess and which is limiting reactant?
b. What is the excess in grams?
c.Theoretically,how many moles of H20 will be produced?
Answer:
Explanation:
Limiting is HCl and excess is Ca(OH)2
excess is 296 grams Ca(OH)2
2 moles H2O will be formed
The picture shows a model of the internal structure of Earth.
Which evidence best supports the different characteristics of each layer in this model?
evaluations of seismic data
direct observations of the layers
explanations of the rock cycle
samples of rocks from the layers
Answer:evaluations of seismic data
Explanation:
determine the mass-to-mass ratio concentration of 5 g salt in 100 g water. Show the steps of calculation.
Considering the definition of mass-to-mass ratio concentration, the mass-to-mass ratio concentration of 5 g salt in 100 g water is 0.05%.
Definition of mass-to-mass ratio concentrationThe percentage by mass or mass-to-mass ratio concentration indicates the amount of mass of solute present in 100 grams of solution.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage:
mass-to-mass ratio concentration= (mass of solute÷ mass of solution)×100%
Mass-to-mass ratio concentration in this caseIn this case, you know:
mass of solute= 5 gmass of water= 100 gReplacing in the definition of mass-to-mass ratio concentration:
mass-to-mass ratio concentration= (5 g÷ 100 g)×100%
Solving:
percent by mass= 0.05 %
Finally, the mass-to-mass ratio concentration is 0.05%.
Learn more about mass-to-mass ratio concentration:
brainly.com/question/19168984
#SPJ1
Which orbital diagram represents lithium
(atomic number = 3)?
Answer:
A.
Explanation:
Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box.
Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box. Thus, option A is correct.
An atom in the neutral state has the same number of protons and electrons. Since protons carry the positive charge and electrons carry negative charge of equal magnitude as that of protons, so, in neutral state the overall charge on the atom is zero.
Atomic number of Lithium is 3. Under neutral state it has 3 protons and 3 electrons. So, its overall electric charge is 0.
If an atom of Lithium loses one of its outermost electron, it is left with 2 electrons and 3 protons. Since, number of protons is 1 more than the number of electrons, the electrical charge on Lithium atom would be positive and the magnitude of charge will be equal to the number of electrons lost, which is 1 in this case.
Learn more about Lithium on:
https://brainly.com/question/32300971
#SPJ6
A hot air balloon has a volume of 3100 m to the third at 91 degrees Celsius what is the volume if the air cools to 86 degrees Celsius
answer: 3057.44 m^3
Explanation:
This is Charles Law which is V1/T1=V2/T2 and temp must be in kelvin
So v2=V1 x T2/T1
v2= 3100 X 359.15 / 364.15 = 3057.44 m^3
t1= 91 +273.15 = 364.15
t2=86+273.15 =359.15
PC15 (s) + H₂O(1)
POCl3 (1) + 2HCl(aq)
When 58.15 g of phosphorus pentachloride reacts with water, what mass
of hydrogen chloride will be produced?
Round your answer to the hundredths place. If needed, enter scientific
notation with the "e". For example, 1.44x107 would be entered as 1.44e7.
When 58.15 g of PCl5 reacts with water, 20.36 g mass of HCl will be produced. Rounded to the hundredths place, the answer is 20.36 g HCl.
What is the mass?
To solve this problem, we need to use the balanced chemical equation and stoichiometry. The balanced chemical equation is:
PCl5 (s) + H2O (l) → POCl3 (l) + 2HCl (aq)
From the equation, we can see that 1 mole of PCl5 reacts with 1 mole of H2O to produce 1 mole of POCl3 and 2 moles of HCl. We can use this information to calculate the moles of HCl produced from the given mass of PCl5.
First, we need to convert the mass of PCl5 to moles:
58.15 g PCl5 x (1 mol PCl5/208.24 g PCl5) = 0.2793 mol PCl5
Next, we can use the mole ratio from the balanced equation to calculate the moles of HCl produced:
0.2793 mol PCl5 x (2 mol HCl/1 mol PCl5) = 0.5586 mol HCl
Finally, we can convert the moles of HCl to grams using its molar mass:
0.5586 mol HCl x (36.46 g HCl/1 mol HCl) = 20.36 g HCl
Therefore, when 58.15 g of PCl5 reacts with water, 20.36 g of HCl will be produced. Rounded to the hundredths place, the answer is 20.36 g HCl.
To know more about mass, visit:
https://brainly.com/question/19694949
#SPJ1
Complete question is: When 58.15 g of phosphorus pentachloride reacts with water, 20.36 g mass of hydrogen chloride will be produced.
what is the answers to this someone pls help
Answer:
The nuclide formed by the β decay of 26Al is 26Mg.
Mark my answer as brainliest! this was a difficult one
At 19 degrees Celsius a gas exerts 1.92 of pressure at what temperature(in Celsius) will it exert a pressure of 0.45 atm
Answer: -204.48 celsius
Explanation:
Gay lussac law P1/T1 = P2/T2
T2 = T1P2/P1
I AM ASSUMING THAT 1.92 IS IN ATMS
Temperature must be in Kelvin
t2= 292.15 x 0.45/1.92 =68.47 K
68.47-273.15 = -204.48 celsius it is a negative number
If I have 4 moles of a gas pressure of 5.6 atm and a volume of 12 liters what is the temperature
Answer: 204.63 K
Explanation:
Ideal gas law
Pv=nRT
T=PV/nR
T= 5.6 X 12/(4 x0.0821)= 204.63 K
R= ideal gas constant = 0.0821
What is the percent of Ca in
Ca(C2H3O2)2?
(Ca = 40.08 g/mol, C = 12.01 g/mol,
H= 1.01 g/mol, O = 16.00 g/mol)
[?] % Ca
Answer:
25.3%
Explanation:
Since
Ca has just 1 mole
Ca ×1 = 40.08
C has 4 moles
C×4 = 48.04
H has 6 moles
H×6 = 6.06
O has 4 moles
O×4 = 64
64+6.06+48.04+40.08=158 (approx.)
40.08÷158 ×100% = 25.3%
Circle the larger one of each pair or grouping below:
Cr²+ or Cr3
Ge, Br, Ca, or Ga
(1) The larger ion is Cr³+
(2) The larger ion is Ca.
What is the size of the ions?In the first pair, we are comparing the cations Cr²⁺ and Cr³⁺. Cations are positively charged ions that form when an atom loses one or more electrons. The charge on a cation tells you how many electrons it has lost. In this case, Cr²⁺ has lost 2 electrons, while Cr³⁺ has lost 3 electrons.
When comparing the sizes of ions, we need to consider the ionic radius. The ionic radius is the distance between the nucleus of an ion and its outermost electron shell.
As we move from left to right across the periodic table, the number of protons in the nucleus increases, which pulls the electrons closer to the nucleus and makes the atoms smaller. As we move down a column in the periodic table, the number of electron shells increases, which makes the atoms larger.
Learn more about size of ions here: https://brainly.com/question/14511468
#SPJ1
an ideal gas has a volume of 3.0 L is the number of moles of gas in the temperature of doubled while the pressure remains constant. What is the new volume?
Answer:
At a temperature of 300K, a gas has a volume of 3.0 L. If we double the temperature to 600K, the volume will increase to 6.0 L. However, the pressure will remain the same at 1 atm. Therefore, the new volume is 6.0 L x 1 atm = 6.0 L
superstition can only be used to explain rogue waves in what types of water
Answer: calm water.
Explanation:
A balloon held at 273 K has an initial volume of 2.0 L at 1.0 atm of pressure. If the pressure is increased to 3.5 atm, what is the new volume of the balloon?
Answer: 5.5 atm
Explanation:
50 points
Problem 1. What masses of 15% and 20% solutions are needed to prepare 200 g of 17% solution?
Problem 2. What masses of 18% and 5% solutions are needed to prepare 300 g of 7% solution?
Problem 3. 200 g of 15% and 350 g of 20% solutions were mixed. Calculate mass percentage of final solution.
Problem 4. 300 g of 15% solution and 35 g of solute were mixed. Calculate mass percentage of final solution.
Problem 5. 400 g of 25% solution and 150 g of water were mixed. Calculate mass percentage of final solution.
80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.
What is Mass Percentage?
Mass percentage is the percentage of the mass of the solute in a solution to the total mass of the solution. It is calculated by dividing the mass of the solute by the total mass of the solution and multiplying by 100%. The mass percentage is often used in chemistry to express the concentration of a solution.
Let x be the mass of the 15% solution needed and y be the mass of the 20% solution needed to prepare 200 g of 17% solution. Then we have the system of equations:
x + y = 200 (total mass of the solution)
0.15x + 0.20y = 0.17(200) (total amount of solute in the solution)
Solving for x and y, we get:
x = 80 g of 15% solution
y = 120 g of 20% solution
Therefore, 80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.
Learn more about Mass Percentage from given link
https://brainly.com/question/26150306
#SPJ1
Ammonium carbamate, NH4OCONH2, decomposes to produce ammonia and carbon dioxide. At 23.00 °C the value Kp for this reaction is 4.01×10-3 .
The Kp, for the decomposition reaction of ammonium carbamate, NH4OCONH2, is given as 4.01×10^-3 at 23.00 °C.The balanced chemical equation for the reaction is:
NH4OCONH2 (g) ⇌ NH3 (g) + CO2 (g)
The value of Kp indicates the ratio of the product of the partial pressures of the products to the product of the partial pressures of the reactants, with each pressure raised to a power equal to its stoichiometric coefficient in the balanced chemical equation. Mathematically, the expression for Kp is:
Kp = (P(NH3) * P(CO2)) / (P(NH4OCONH2))
where P is the partial pressure of each gas.
At equilibrium, the partial pressures of NH3, CO2, and NH4OCONH2 will be related by the Kp value. If the partial pressures of the products are known, the partial pressure of the reactant can be calculated using the Kp value. Conversely, if the partial pressure of the reactant is known, the partial pressures of the products can be calculated using the Kp value.
It is important to note that the value of Kp is temperature-dependent, and as such, the equilibrium composition of the reaction mixture will change with changes in temperature.
To know more about the decomposition, visit:
https://brainly.com/question/8009068
#SPJ1
Which of the following are the products and reactants of a chemical reaction most likely to have in common?
1. Atoms
2. Molecules
3. Chemical properties
Answer:
1. Atoms
Explanation:
The products and reactants of a chemical reaction are usually related in terms of their atoms and molecules. During a chemical reaction, atoms are rearranged to form new molecules, and these new molecules are the products of the reaction. However, the atoms themselves are not created or destroyed in the process.
For example, if we consider the combustion of methane (CH4) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), the reactants (methane and oxygen) and the products (carbon dioxide and water) are all made up of the same types of atoms (carbon, hydrogen, and oxygen), but they are rearranged in different ways. The chemical properties of the reactants and products may differ, but they are still related in terms of their atomic and molecular composition.
It's difficult though to say which is more likely between atoms and molecules because they are both essential components of chemical reactions. In a chemical reaction, atoms combine to form molecules or break apart from molecules to form new molecules. Therefore, both atoms and molecules are important in a chemical reaction.
However, if we had to choose one that is more likely to be common between the reactants and products, it would probably be atoms. This is because in most chemical reactions, the atoms involved in the reactants are rearranged to form the products. The chemical reaction simply involves the rearrangement of the atoms, but the atoms themselves are not created or destroyed
On the other hand, molecules may change significantly during a chemical reaction, as they are made up of specific arrangements of atoms. The chemical properties of the reactants and products may also differ because of changes in the molecular structure. Therefore, while molecules are still an essential part of chemical reactions, it is more likely that atoms will be common between the reactants and products.
help please need by tomorrow
A metal object with mass of 20.9 g is heated to 97.0 ∘C and then transferred to an insulated container containing 86.0 g of water at 20.5 ∘C. The water temperature rises and the temperature of the metal object falls until they both reach the same final temperature of 24.1 ∘C.
What is the specific heat of this metal object? Assume that all the heat lost by the metal object is absorbed by the water.
Answer:
To find the specific heat of the metal object, we can use the equation:
q = mcΔT
where q is the amount of heat transferred, m is the mass of the object, c is the specific heat capacity, and ΔT is the change in temperature.
We know that the metal object loses heat while the water gains heat, and the total amount of heat lost by the metal object is equal to the total amount of heat gained by the water:
qmetal = qwater
Using the equation above for each of these, we get:
mcΔT = mwatercwaterΔTwater
where cwater is the specific heat capacity of water and mwater is the mass of water.
Substituting in the given values, we get:
(20.9 g)(c)(97.0 °C - 24.1 °C) = (86.0 g)(4.184 J/g·°C)(24.1 °C - 20.5 °C)
Simplifying and solving for c, we get:
c = [(86.0 g)(4.184 J/g·°C)(24.1 °C - 20.5 °C)] / [(20.9 g)(97.0 °C - 24.1 °C)]
c = 0.385 J/g·°C
Therefore, the specific heat of the metal object is 0.385 J/g·°C.
glucose molecule starch molecule protein molecule carbon dioxide molecule water molecule amino acid molecule 1. In the space below, list the molecules in order from smallest to largest. oxygen molecule
Answer:
oxygen molecule, water molecule, glucose molecule, amino acid molecule, carbon dioxide molecule, protein molecule, starch molecule.
Explanation:
What happens to the solubility of gases in water as pressure increases?
Question 9 options:
solubility increases so less solute dissolves
solubility decreases so more solute dissolves
solubility increases so more solute dissolves
solubility decreases so less solute dissolves
Answer: Solubility increases so more solute dissolves
Explanation:
The solubility is a measure of the concentration of the dissolved gas particles in the liquid and is a function of the gas pressure. As you increase the pressure of a gas, the collision frequency increases and thus the solubility goes up, as you decrease the pressure, the solubility goes down.
which statement describes density? Check all that apply
Density is a chemical property of an object.
The density of an object is constant.
Density is a derived unit of measure.
Density is the sum of the mass and volume of an object.
The density of an object determines whether it will sink or float.
Answer:
The density of an object is constant.
Density is a derived unit of measure.
The density of an object determines whether it will sink or float.
Functional groups rosuvastatin
It is a synthetic statin, an dihydroxy monocarboxylic acids, a pyrimidine, a sulfonamide, and a monofluorobenzene. It shares a functional connection with hept-6-enoic acid.
What is rosuvastatin consist of?20 mg of rosuvastatin are contained in each film-coated tablet (as rosuvastatin calcium). Each 20 mg tablet also includes 0.025 milligrammes Sunset yellow FCF, 0.029 mg Allura red AC, and 91.755 mg lactose monohydrate.
What constitutes cholesterol's main functional group?Yet, because cholesterol has a steroid nucleus, it will behave differently. Aldehyde, ketone, ether, and amide groups don't exist in cholesterol. It only possesses one hydroxyl group, which, like carbohydrates, contains the functional group alcohol.
To know more about dihydroxy visit:
https://brainly.com/question/29137002
#SPJ1