Can someone help me?
Which element would have the lowest electronegativity?
an element with a large number of valence electrons and a small atomic radius
an element with a large number of valence electrons and a large atomic radius
an element with a small number of valence electrons and a large atomic radius
an element with a small number of valence electrons and a small atomic radius
Answers
Answer:
an element with a large number of valence electrons and a large atomic radius
Explanation:
Electronegativity means a tedency when an atom attracts bonding electrons in a covalent bond situation.
» If an atom has many valency electrons [ empty orbitals in outermost shell ], it has difficulty in attracting electrons hence electronegativity low.
» If an atom is large, its nuclear attraction force of incoming electrons is low hence low electronegativity.
[tex].[/tex]
The element that would have the lowest electronegativity is an element with a small number of valence electrons and a large atomic radius.
Both electronegativity and atomic radius are periodic trends. Electronegativity increases across the period while atomic radius decreases across a period.
An element that has a small number of valence electrons and a large atomic radius will most likely be a metal hence it will have the lowest electronegativity.
Learn more: https://brainly.com/question/2060520
Related Questions
In comparing groups, the first or the second, which group was more precise or was the precision the same
Answers
Comparing the data obtained online, the first group is more precise
The reason the above selection is correct is as follows;
Question: Parts of the question appear missing from a similar question online and included here;
First Group:
[tex]\begin{array}{|c|c|c|c|c|c|c|} Team \ a &Team \ b&Team \ c&Team \ d&Team \ e&Team \ f&Team \ g\\2.77 \ cm&2.60 \ cm&2.80 \ cm&2.65 \ cm&2.75 \ cm&2.65 \ cm& 2.68 \ cm\end{array}\right][/tex]
Second Group
[tex]\begin{array}{|c|c|c|c|c|c|c|} Team \ a &Team \ b&Team \ c&Team \ d&Team \ e&Team \ f&Team \ g\\2.70 \ cm&2.78 \ cm&2.62 \ cm&2.65 \ cm&2.75 \ cm&2.80 \ cm& 2.60 \ cm\end{array}\right][/tex]
Calculations for the first group:
The average = (2.77 + 2.60 + 2.80 + 2.65 + 2.75 + 2.65 + 2.68)/7 = 2.7
The range = 2.80 - 2.60 = 0.20
The approximate ± range of the average = ±0.2/2 = ±0.1
The precision of the first measurement is 2.7 ± 0.1 cm
Calculations for the second group:
The average = (2.70 + 2.78 + 2.62 + 2.65 + 2.75 + 2.80 + 2.60)/7 = 2.7
The range = 2.80 - 2.60 = 0.20
The approximate ± range from the average = ±0.2/2 = ±0.1
The range of values from the average is approximately ±0.1 cm
The precision of the first measurement is 2.7 ± 0.1 cm
Method to determine precision:
Precision is given by the finding the average deviation and the standard deviation as follows;
[tex]\mathbf{Average \ deviation} = \dfrac{\sum \left | x - \mu \right |}{n}[/tex]
[tex]\mathbf{Standard\ deviation} =\sqrt{\dfrac{\sum \left ( x - \mu \right )^2}{n}}[/tex]
Where;
μ = The mean or average = 2.7
n = The number of items (count) of the data = 7
For the first group, we have;
[tex]\mathbf{\dfrac{\sum \left | x - \mu \right |}{n}} = \dfrac{0.07 + 0.1 + 0.1 + 0.05 + 0.05 + 0.05 + 0.02 }{7} = \mathbf{0.062857}[/tex]
The average deviation of the first group = 0.062857
∑(x - μ)² ≈ 0.0328
[tex]\mathbf{The \ standard\ deviation} =\sqrt{\dfrac{0.0328}{7}} \approx \mathbf{0.068452}[/tex]
For the second group, we have;
[tex]\mathbf{\dfrac{\sum \left | x - \mu \right |}{n}} = \dfrac{0.0+ 0.08 + 0.08 + 0.05 + 0.05 + 0.1 + 0.1 }{7} = \mathbf{0.06571428571}[/tex]
∑(x - μ)² ≈ 0.0378
[tex]\mathbf{The \ standard\ deviation} =\sqrt{\dfrac{0.0378}{7}} \approx \mathbf{0.073485}[/tex]
By using the average deviation, and standard deviation values, the deviation of the second group is more than the first group and therefore the first group is more precise
Learn more about accuracy and precision here:
https://brainly.com/question/11992940
Help!! due tomorrow
.
Answers
Answer:
It's B. The molecules in the system have more kinetic energy than a solid.
What is the relationship between a calorie and a
joule?
Answers
why is chromatography not able to separate components of a solution which have same speed?Give reason.
Answers
Answer:
The dyes which cover more surface area will travel more slowly. Similarly if two substances which have same speeds, they are going to travel together and they won't separate as chromatography separates substances having different rates or speeds for travelling
Chromatography cannot separate components with the same speed due to their identical affinities.
Why does chromatography fail to separate components with similar speeds?In chromatography, separation relies on differences in affinity between the components and the stationary phase. When components have the same speed, it indicates that their interactions with the stationary phase are nearly identical.
As a result, the forces that cause one component to move ahead of the other are not pronounced enough to achieve effective separation. Without distinct interactions, chromatography struggles to discriminate between components leading to poor separation outcomes.
Read more about chromatography
brainly.com/question/28731153
#SPJ3
how could you use this procedure to identify
as unknown type of green ink?
Answers
Answer:
After conducting the experiment it was clear to see that the green ink used was indeed a mixture as it separated from the rubbing alcohol.
has a density of 0.855 g/mL. How many LITERS would have a mass of 1.00 kg?
Answers
Answer:
V = 1.154 L
Explanation:
1. convert 1.00 kg to grams = 1,000 grams
2. use density formula d = m/v to find volume
v = m/d = 1,000 g = 1,154.73 ml
0.866 g/mL
convert to liters, divide by 1000 ml
V = 1.154 L
WHATS THE FREEZING POINT FOR WATER
Answers
Answer:
0 degrees Celcius and 32 degrees fahrenheit
Explanation:
Explain briefly why ammonia and oxygen molecules participate readily in coordinate bonding. Give an example for the formation of an ion by ammonia by this means. Show by means of electronic diagram the formation of a coordinate linkage between phosphorus tri chloride and oxygen?
Answers
Explanation:
When one atom supplies both electrons in forming a two-electron bond, it is known as a dative covalent or coordinate bond. ... In this case, the nitrogen atom has a lone pair of electrons that coordinates to the hydrogen cation, which has zero electrons, forming a covalent bond.
3. Take vinegar, lemon juice, tap water in three separate glass beakers. Put chalk piece,pin, egg shell, leaves in three beakers. Note your observations how test the gas evolved in it.
Answers
Answer:
This process is know as Chromotography
Explanation:
an element consists of 1.40% of an isotope
Answers
Answer:
I think it's lead (pb). Hope this helps.
Answer:
lead
Explanation:
i need help please........
Answers
Answer:
cd
Explanation:
image is formed due to reflected light rays and it is enlarged because image distance/ object distance = height of image/height of object
v>u so image is enlarged
When a gas is dissolved in a liquid, what happens when the pressure increases?
Answers
Answer: B, the gas is being squeezed out of the liquid.
Explanation: The gas does not want to be trapped inside of the liquid, so it is trying to force it’s way out. Therefore creating more pressure in the container or whatever the liquid is being held in.
Answer: more gas dissolves into the liquid
Explanation: just got it wrong thats the right answer
heleep I don't understand
Answers
Answer:
Loading...
Explanation:
Answer:
This is animal shell
Explanation:
Because it shape and size is in circular shape of body so we can find the types
Freezing water cracking limestone
a
Chemical Change
b
Physical Change
Answers
Answer:
Freezing water and cracking limestone are physical changes.
(Physical Science)
Which group of metals includes elements with one valence electron? (1 point)
A. alkaline earth metals
B. rare earth metals
C. alkali metals
D. transition metals
Answers
Answer:
C
Explanation:
alkali metals are the Group I elements, which have 1 electron in their valence shells
Answer:
Alkali metals are the elements which have only one valence electron in their outermost or ultimate shell.
Explanation:
Alkaline Earth metals have 2 valence electron in their outermost shell and readily give up their 2 electron to achieve stability.
Rare Earth Metals have 3 valence electron in their outermost shell and they have high magnetic moments and divert range of magnetic structure.
Alkali Earth metals have 1 valence electron.
Transition metals generally have 2 valence electron .
Learn more on:
https://brainly.com/question/3062525
Which of the following is NOT a pure substance?
а.
b.
C.
d.
Answers
Answer:
lol where is your questions??
The phenomenon where an electric current is produced by shining a light on a metal plate is called the ________ effect. The minimum frequency required to cause to flow is called the ________ frequency. This frequency depends on the identity of the metal used.
Answers
Answer:
Photoelectric, Threshold
Explanation:
Your welcome
how many figures does 40.01 have?
Answers
Answer:
4 the number of figures
Explanation:
answers above
Revision has a atoMic number of 37 and a mass number of 85. HIW many protons, neutrons and electrons does an ion of rubidium with a 1+ charge have
Answers
Answer: 37 protons, 48 neutrons, and 36 electrons.
Explanation: I assume "Revision" is Rubidium. It is atomic number 37, so it has 37 protons. It's atomic mass is 85, so it has an average of (85-37) = 48 neutrons. It has a charge of +1, so one electron of the original 37 has left.
What does PA signify? How does it differ from 4P?
Answers
Answer:the snaswer is combined
Explanation:you have to piutg it’s toggle did dcdhcd
There are three stable forms of neon: neon-20, neon-21, and neon-22. Which statement is true
- the atomic mass of the three isotopes is the same
-the three isotopes are all radioactive
-the three isotopes are equally abundant in nature
-the charge of all isotopes is the same
Answers
Answer:
The charge of all isotopes are the same.
Explanation:
Some isotopes are radioactive.
They have different numbers of neutrons resulting in different atomic mass.
Not all isotopes are equally abundant in nature.
Answer:
Then answer is the charge of all isotopes is the same
Explanation:
A researcher wants to conduct an experiment to see how the amount of breakfast a student eats
affects their performance in school. He makes 2 groups, one group consumes 300 calories in
the morning while the second group does not eat breakfast at all. After 2 weeks he compares
the students test scores and every student takes the same tests. Identify the following:
a. Control Group:
b. Independent Variable:
c. Dependent Variable:
Answers
The control group are the students who eat no breakfast. The independent variable is the consumption of breakfast. The dependent variable is the performance of students in school.
In an experiment, the control group is the group that did not receive the treatment. The treatment in this case is the consumption of breakfast. Hence the group that did not consume breakfast is the control group.
The independent variable is the variable that is being manipulated and its effect evaluated. The manipulated variable here is consumption of food.
The dependent variable is the variable that is being measured. In this case, it is the performance of students at school.
Learn more; https://brainly.com/question/967776
Why is copper sulfate a compound and diamond an element?
Answers
Answer:
Copper(II) sulfate is the chemical compound with the formula CuSO4. This salt exists as a series of compounds that differ in their degree of hydration. The anhydrous form is a pale green or gray-white powder, whereas the pentahydrate (CuSO4·5H2O), the most commonly encountered salt, is bright blue.
Explanation:
Answer:
Copper sulfate is the compound with the formula CuSO4. This salt exists as a series of compounds that differ in their degree of hydration. The anhydrous form is a pale green or gray-white powder, whereas the pentahydrate (CuSO4·5H2O), the most commonly encountered salt, is bright blue.Yes, Diamond is called as an element because it is a crystalline form of a single element i.e., carbon. The structure of Diamond is cubic type, in which one carbon atom is tetrahedrally bonded to four other carbon atoms. This tetrahedral structure is extended in all three directions.Explanation:
I hope U like my answer and my answer helped U....Which of the following
statements is true about the
charges of protons and neutrons?
A. Protons and neutrons have the same charge.
B. Protons have a positive charge and neutrons
have no charge.
C. Protons have a negative charge and neutrons
have a positive charge.
Answers
Answer:
B
Explanation:
Protons have a positive charge while neutrons have no charge because they are neutral.
Answer:
b
Explanation:
b/ce protons have+ charge while neutrons have no charge
Can lead ii carbonate conduct electricity? Explain your answer
Answers
Solid Lead II carbonate can not conduct electricity because it is insoluble in water.
First of all, we must establish the fact that ionic solids conduct electricity in solution because they can be broken up into ions in solution.
In the solid state, they do not conduct electricity because the ions are strongly bound by electrostatic forces.
However, if an ionic substance is insoluble in water, its ions are not available to conduct electricity since ions are the charge carrier in solution. As a result of this, such a substance will not conduct electricity.
Since Lead II carbonate is insoluble in water, its ions are not available hence the substance does not conduct electricity.
Learn more: https://brainly.com/question/14077687
How could you describe the changes that happen when carbon changes form from graphite to diamond?
Answers
The change from graphite to diamond is a chemical change.
A chemical change involves the rearrangement of atoms in a substance. In other words, the "composition" of the substance changes when a chemical change takes place.
This is clearly seen when graphite changes to diamond. The arrangement of carbon atoms changes as reflected by the change in the density of graphite when it is converted to diamond.
Learn more: https://brainly.com/question/6284546
A car start from rest and covers distance of 100m after 10seconds.if the acceleration is 2m/s square, calculate the final velocity..
Answers
Answer:
20 m/s
Explanation:
solution,
initial velocity (u)=0 m/s
Distance covered(s)=100m
Time taken(t)=10 seconds
Acceleration (a)=2m/s²
Now,
By using first equation of motion, we have
v=u+at
=0+2×10
=20 m/s
I hope it helped U
stay safe stay happy
How can you determine the number of shells in an atom of a certain element, based
on the element's position on the periodic table?
Answers
Answer: At some point in your chemistry education, you may have been introduced to the song “The Elements in which Tom Lehrer does a rapid
fire musical rendition of all the elements' names. Like me, you may even have been offered the opportunity to memorize this song for extra credit. If so, it’s possible that you still remember the names of all the elements, which is an impressive feat—not to mention a fun trick to pull out at parties.
Explanation:
on what factors the Modern Periodic Table is different from that of the Mendeleev's periodic table?Write any two reasons.
Answers
Explanation:
The main difference between Mendeleev and Modern period table is that Mendeleev's periodic table orders the elements based on their atomic mass whereas Modern periodic table orders the elements based on their atomic number.
Mendeleev's periodic law states that the physical and chemical properties of the elements are a periodic function of their atomic weights while Modern periodic law states that physical and chemical properties of elements are a periodic function of their numbers.
Which of the following best describes a scientific model?
Question 6 options:
Something used to represent an idea or process
A way to prove a theory is true
A direct experience in nature
A prediction that can be tested
Answers
Explanation:
idea= hypothesis
xperience in nature= read Darwin's theory..
with birds from Galapagos island or rain forest environment., had proven that the shape of a bird's beaks, determined what their diet consisted of In the wild.
captured birds from such countries, has proven, an omnivore or seed eater...through testing plus dissection.