The correct statement regarding optical instruments such as eyeglasses is that a near-sighted person has trouble focusing on distant objects and wears glasses with diverging lenses. The correct option is - A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
Nearsightedness is a condition in which the patient is unable to see distant objects clearly but can see nearby objects. In individuals with nearsightedness, light rays entering the eye are focused incorrectly.
The eyeball in nearsighted individuals is somewhat longer than normal or has a cornea that is too steep. As a result, light rays converge in front of the retina rather than on it, causing distant objects to appear blurred.
Eyeglasses are an optical instrument that helps people who have vision problems see more clearly. Eyeglasses have lenses that compensate for refractive errors, which are responsible for a variety of visual problems.
Eyeglasses are essential tools for people with refractive problems like astigmatism, myopia, hyperopia, or presbyopia.
A near-sighted person requires eyeglasses with diverging lenses. Diverging lenses have a negative power and are concave.
As a result, they spread out light rays that enter the eye and allow the image to be focused properly on the retina.
So, the correct statement is - A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
Learn more about eyeglasses here:
https://brainly.com/question/31868298
#SPJ11
Light travels through an unknown substance at 2.58 x 108 m/s. Calculate the index of refraction to 3 decimal places. Your Answer: Answer Question 6 (1 point) Listen If the refractive index for a material is (1.77x10^0), calculate the velocity of light in this substance. Give your answer to 2 decimal places. Note: Your answer is assumed to be reduced to the highest power possible. Your Answer: x10 Answer units
The index of refraction of the unknown substance is 1.16 (rounded to three decimal places). The velocity of light in the given substance is approximately 1.69 x 10^8 m/s (rounded to two decimal places).
Question 1: Light travels through an unknown substance at 2.58 x 10^8 m/s. Calculate the index of refraction to 3 decimal places.To calculate the index of refraction, we need to use the formula:
n = c / v
where:
n is the index of refraction, c is the speed of light in a vacuum (which is approximately 3.00 x 10^8 m/s), and v is the speed of light in the unknown substance.
Substituting the values given:
v = 2.58 x 10^8 m/s
n = (3.00 x 10^8 m/s) / (2.58 x 10^8 m/s)n = 1.16
Question 2: If the refractive index for a material is (1.77x10^0), calculate the velocity of light in this substance. Give your answer to 2 decimal places. Note: Your answer is assumed to be reduced to the highest power possible.We can use the formula:
n = c / v
where:
n is the index of refraction, c is the speed of light in a vacuum, and v is the speed of light in the given substance.
Substituting the values given:
n = 1.77 x 10^0c = 3.00 x 10^8 m/sWe need to solve for v. Rearranging the formula, we get:
v = c / n
Substituting the values given:
v = (3.00 x 10^8 m/s) / (1.77 x 10^0)v ≈ 1.69 x 10^8 m/s
To know more about velocity:
https://brainly.com/question/30559316
#SPJ11
a)
Calculate the density of the moon by assuming it to be a sphere of diameter 3475 km and having a mass of 7.35 × 10^22 kg. Express your answer in g/cm3.
)
A car accelerates from zero to a speed of 36 km/h in 15 s.
i.
Calculate the acceleration of the car in m/s2.
ii.
If the acceleration is assumed to be constant, how far will the car travel in 1 minute ?
iii.
Calculate the speed of the car after 1 minute.
The density of the moon is determined to be 3.35 g/cm³ based on its mass and volume. In the case of the car, it experiences an acceleration of 2/3 m/s², enabling it to travel a distance of 4000 m in 1 minute and achieve a speed of 200/3 m/s.
a) Density of the moon: Density is the measure of mass per unit volume of a substance. It is denoted by p. It is given as:
[tex]\[Density=\frac{Mass}{Volume}\][/tex]
Given that the diameter of the moon is 3475 km and the mass of the moon is 7.35 × 10²² kg, we need to find the density of the moon. We know that the volume of a sphere is given as:
[tex]\[V=\frac{4}{3}πr^{3}\][/tex]
Here, the diameter of the sphere is 3475 km. Therefore, the radius of the sphere will be half of it, i.e.:
[tex]\[r=\frac{3475}{2}\ km=1737.5\ km\][/tex]
Substituting the given values in the formula to get the volume, we get:
[tex]\[V=\frac{4}{3}π(1737.5)^{3}\ km^{3}\][/tex]
Converting km to cm, we get:
[tex]\[1\ km=10^{5}\ cm\]\[\Rightarrow 1\ km^{3}=(10^{5})^{3}\ cm^{3}=10^{15}\ cm^{3}\][/tex]
Therefore,[tex]\[V=\frac{4}{3}π(1737.5×10^{5})^{3}\ cm^{3}\][/tex]
Now we can find the density of the moon:
[tex]\[Density=\frac{Mass}{Volume}\]\[Density=\frac{7.35×10^{22}}{\frac{4}{3}π(1737.5×10^{5})^{3}}\ g/{cm^{3}}\][/tex]
Simplifying, we get the density of the moon as:
[tex]\[Density=3.35\ g/{cm^{3}}\][/tex]
b) Acceleration of the car
i. The initial velocity of the car is zero. The final velocity of the car is 36 km/h or 10 m/s. The time taken by the car to reach that velocity is 15 s. We can use the formula of acceleration:
[tex]\[Acceleration=\frac{Change\ in\ Velocity}{Time\ Taken}\]\[Acceleration=\frac{10-0}{15}\ m/s^{2}\][/tex]
Simplifying, we get the acceleration of the car as:
[tex]\[Acceleration=\frac{2}{3}\ m/s^{2}\][/tex]
ii. If we assume that the acceleration of the car is constant, we can use the formula of distance traveled by a uniformly accelerated body:
[tex]\[Distance\ travelled=\frac{Initial\ Velocity×Time\ Taken+\frac{1}{2}Acceleration\times(Time\ Taken)^{2}}{2}\][/tex]
Here, the initial velocity of the car is zero, the acceleration of the car is 2/3 m/s² and the time taken by the car to travel a distance of 1 minute is 60 s.
Substituting these values, we get:
[tex]\[Distance\ travelled=\frac{0\times 60+\frac{1}{2}\times \frac{2}{3}\times (60)^{2}}{2}\ m\]\[Distance\ travelled=\frac{12000}{3}=4000\ m\][/tex]
Therefore, the car will travel a distance of 4000 m in 1 minute.
iii. If we assume that the acceleration of the car is constant, we can use the formula of distance traveled by a uniformly accelerated body
[tex]:\[Distance\ travelled=\frac{Initial\ Velocity×Time\ Taken+\frac{1}{2}Acceleration\times(Time\ Taken)^{2}}{2}\][/tex]
Here, the initial velocity of the car is zero, the acceleration of the car is 2/3 m/s² and the time taken by the car to travel a distance of 1 minute is 60 s. We need to find the speed of the car after 1 minute. We know that:
[tex]\[Speed=\frac{Distance\ travelled}{Time\ Taken}\][/tex]
Substituting the values of the distance traveled and time taken, we get:
[tex]\[Speed=\frac{4000}{60}\ m/s\][/tex]
Simplifying, we get the speed of the car after 1 minute as: [tex]\[Speed=\frac{200}{3}\ m/s\][/tex]
Learn more about density at: https://brainly.com/question/1354972
#SPJ11
A lighter-than-air spherical balloon and its load of passengers and ballast are floating stationary above the earth. Ballast is weight (of negligible volume) that can be dropped overboard to make the balloon rise. The radius of this balloon is 7.42 m. Assuming a constant value of 1.29 kg/m° for the density of air, determine how much weight must be dropped overboard to make the balloon rise 193 m in
19.0 s.
The weight of ballast that needs to be dropped overboard to make the balloon rise 193 m in 19.0 s is approximately 3.91 × 10⁴ kg.
A lighter-than-air spherical balloon and its load of passengers and ballast are floating stationary above the earth.
The radius of this balloon is 7.42 m.
Height the balloon needs to rise = h = 193 m
Time required to rise = t = 19.0 s
Density of air = p = 1.29 kg/m³
The weight of the displaced air is equal to the buoyant force acting on the balloon and its load.
The buoyant force is given by
Fb = (4/3) πr³pgh
Where,r = radius of the balloon
p = density of the air
g = acceleration due to gravity
h = height the balloon needs to rise
Given that the balloon and its load are stationary, the upward buoyant force is balanced by the downward weight of the balloon and its load.
W = Fb = (4/3) πr³pgh
Let ΔW be the weight of the ballast that needs to be dropped overboard to make the balloon rise 193 m in 19.0 s. The work done in lifting the balloon and its load to a height of h is equal to the gravitational potential energy gained by the balloon and its load.
W = Δmgh
Where,
Δm = ΔWg = acceleration due to gravity
h = height the balloon needs to rise
Thus, Δmgh = (4/3) πr³pgh
Δm = (4/3) πr³pΔh
The change in height (Δh) of the balloon in time t is given by
Δh = 1/2 gt² = 1/2 × 9.81 m/s² × (19.0 s)²
Δh = 1786.79 m
Δm = (4/3) × π × (7.42 m)³ × (1.29 kg/m³) × (1786.79 m)
Δm = 3.91 × 10⁴ kg
Learn more about Density at https://brainly.com/question/26364788
#SPJ11
An advanced lat student is studying the effect of temperature on the resistance of a current carrying wire. She applies a voltage to a tungsten wire at a temperature of 59.0"C and notes that it produces a current of 1.10 A she then applies the same voltage to the same wire at -880°C, what current should she expect in A? The temperature coefficient of resistity for tungsten 450 x 10(°C) (Assume that the reference temperature is 20°C)
The current that the advanced lat student should expect in A is 9.376 × 10⁻⁷ A.
Given data:
Initial temperature of tungsten wire, t₁ = 59.0°C
Initial current produced, I₁ = 1.10 A
Voltage applied, V = Same
Temperature at which voltage is applied, t₂ = -880°C
Temperature coefficient of resistivity of tungsten, α = 450 × 10⁻⁷/°C
Reference temperature, Tref = 20°C
We can calculate the resistivity of tungsten at 20°C, ρ₂₀, as follows:
ρ₂₀ = ρ₁/(1 + α(t₁ - Tref))
ρ₂₀ = ρ₁/(1 + 450 × 10⁻⁷ × (59.0 - 20))
ρ₂₀ = ρ₁/1.0843925
Now, let's calculate the initial resistance, R₁:
R₁ = V/I₁
Next, we can calculate the final resistance, R₂, of the tungsten wire at -880°C:
R₂ = ρ₁/[1 + α(t₂ - t₁)]
Substituting the values, we get:
R₂ = ρ₂₀ × 1.0843925/[1 + 450 × 10⁻⁷ × (-880 - 59.0)]
R₂ = 1.17336 × 10⁶ ohms (approx.)
Using Ohm's law, we can calculate the current, I₂:
I₂ = V/R₂
I₂ = 1.10/1.17336 × 10⁶
I₂ = 9.376 × 10⁻⁷ A or 0.9376 µA (approx.)
Therefore, the current that the advanced lat student should expect is approximately 9.376 × 10⁻⁷ A or 0.9376 µA.
Learn more about Ohm's law:
brainly.com/question/30091966
#SJP11
Any two point charges exert equally strong electric forces on each other. Coulomb's constant is
8.99 × 10° N-m2/C?, and given that an electron has a charge of -1.60 × 10-19 C: What is the electric force (magnitude and direction) between two electrons (-e) separated by a
distance of 15.5 cm?
The magnitude of the electric force between two electrons separated by a distance of 15.5 cm is approximately 2.32 × 10^-8 N. The direction of the force is attractive, as like charges repel each other, and both electrons have a negative charge.
The electric force between two charges can be calculated using Coulomb's law:
F = k * |q1 * q2| / r^2
where F is the electric force, k is Coulomb's constant (8.99 × 10^9 N m^2/C^2), q1 and q2 are the charges, and r is the distance between the charges.
Given that both charges are electrons with a charge of -1.60 × 10^-19 C, and the distance between them is 15.5 cm (which can be converted to meters as 0.155 m), we can substitute the values into the equation:
F = (8.99 × 10^9 N m^2/C^2) * |-1.60 × 10^-19 C * -1.60 × 10^-19 C| / (0.155 m)^2
Calculating the expression inside the absolute value:
|-1.60 × 10^-19 C * -1.60 × 10^-19 C| = (1.60 × 10^-19 C)^2 = 2.56 × 10^-38 C^2
Substituting this value and the distance into the equation:
F = (8.99 × 10^9 N m^2/C^2) * (2.56 × 10^-38 C^2) / (0.155 m)^2
Calculating further:
F ≈ 2.32 × 10^-8 N
Therefore, the magnitude of the electric force between two electrons separated by a distance of 15.5 cm is approximately 2.32 × 10^-8 N. The direction of the force is attractive, as like charges repel each other, and both electrons have a negative charge.
Learn more about magnitude:
https://brainly.com/question/30337362
#SPJ11
The most abundant isotope of carbon is 12 C, which has an atomic number Z = 6 and mass number A = 12. The electron configuration of the valence shell of carbon is characterised by two electrons in a p-shell with 1 = 1 (namely, 2p2). By applying Hund's rules, do you expect that carbon is a paramagnetic or diamagnetic material? Please briefly explain why in your own words.
Based on the electron configuration of carbon and Hund's rules, we can expect carbon to be a paramagnetic material due to the presence of unpaired electrons.
The electron configuration of carbon is 1s2 2s2 2p2, which means there are two electrons in the 2p subshell. According to Hund's rules, when orbitals of equal energy (in this case, the three 2p orbitals) are available, electrons will first fill each orbital with parallel spins before pairing up.
In the case of carbon, the two electrons in the 2p subshell would occupy separate orbitals with parallel spins.
This is known as having unpaired electrons. Paramagnetism is a property exhibited by materials that contain unpaired electrons. These unpaired electrons create magnetic moments, which align with an external magnetic field, resulting in attraction.
Therefore, based on the electron configuration of carbon and Hund's rules, we can expect carbon to be a paramagnetic material due to the presence of unpaired electrons.
Learn more about Hund's rules here : brainly.com/question/12646067
#SPJ11
A rock is dropped at time t=0 from a bridge. 1 sesond later a second rock is dropped from the same height. What is the distance between both rocks at time t=1 ? 4.9 m 3.2 m 6.2 m 7.3 m
The correct option is 4.9 m. The distance between the two rocks at time t=1 second can be calculated using the formula for the distance traveled by a falling object, considering the acceleration due to gravity
When an object is dropped from a height, its vertical motion can be described using the equation:
d = (1/2) * g * t^2,
where d is the distance traveled, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time.
For the first rock dropped at time t=0, the distance traveled after 1 second can be calculated as:
d1 = (1/2) * (9.8 m/s^2) * (1 s)^2 = 4.9 m.
For the second rock dropped 1 second later, its time of travel will be t=1 second. Therefore, the distance traveled by the second rock can also be calculated as:
d2 = (1/2) * (9.8 m/s^2) * (1 s)^2 = 4.9 m.
Hence, the distance between both rocks at time t=1 second is equal to the distance traveled by each rock individually, which is 4.9 meters.
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
The hour-hand of a large clock is a 1m long uniform rod with a mass of 2kg. The edge of this hour-hand is attached to the center of the clock. At 9:00 gravity causes _____ Newton-meters of torque, and at 12:00 gravity causes _____ Newton-meters of torque.
At 9:00, gravity causes 9.81 N⋅m of torque and at 12:00, gravity causes zero torque.The hour hand of a large clock is a 1m long uniform rod with a mass of 2kg.
The edge of this hour hand is attached to the center of the clock. When the time of the clock is 9:00, the hand of the clock is vertical pointing down, and it makes an angle of 270° with respect to the horizontal. Gravity causes 9.81 newtons of force per kg, so the force on the rod is
F = mg
= 2 kg × 9.81 m/s2
= 19.62 N.
When the hand of the clock is at 9:00, the torque caused by gravity is 19.62 N × 0.5 m = 9.81 N⋅m. At 12:00, the hand of the clock is horizontal, pointing towards the right, and it makes an angle of 0° with respect to the horizontal. The force on the rod is still 19.62 N, but the torque caused by gravity is zero, because the force is acting perpendicular to the rod.Therefore, at 9:00, gravity causes 9.81 N⋅m of torque and at 12:00, gravity causes zero torque.
To know more about Torque visit-
brainly.com/question/31323759
#SPJ11
A CONCAVE lens has the same properties as a CONCAVE mirror.
A. true
B. False
The Given statement "A CONCAVE lens has the same properties as a CONCAVE mirror" is FALSE because A concave lens and a concave mirror have different properties and behaviors.
A concave lens is thinner at the center and thicker at the edges, causing light rays passing through it to diverge. It has a negative focal length and is used to correct nearsightedness or to create virtual images.
On the other hand, a concave mirror is a reflective surface that curves inward, causing light rays to converge towards a focal point. It has a positive focal length and can produce both real and virtual images depending on the location of the object.
So, a concave lens and a concave mirror have opposite effects on light rays and serve different purposes, making the statement "A concave lens has the same properties as a concave mirror" false.
Learn more about CONCAVE at
https://brainly.com/question/29142394
#SPJ11
A 750 kg roller coaster car passes point A with a speed of 15 m/s, as shown in the diagram below. (Assume all heights are accurate to 2 sig. digs.) Find the speed of the roller coaster at point F if 45 000 J of energy is lost due to friction between A (height 75 m) and F (height 32 m): 75 m LANE 40 m 1 B 32 m 12 m
Using the conservation of energy principle, the velocity of the roller coaster car at F is 25 m/s.
In the figure given, roller coaster car with a mass 750kg passes point A with speed 15 m/s.
We are to find the speed of the roller coaster at point F if 45,000 J of energy is lost due to friction between A (height 75 m) and F (height 32 m).
The energy loss between A and F can be expressed as the difference between the initial potential energy of the car at A and its final potential energy at F.In terms of energy conservation:
Initial energy at A (E1) = Kinetic energy at F (K) + Final potential energy at F (E2) + Energy loss (EL)
i.e., E1 = K + E2 + EL
We can determine E1 using the initial height of the roller coaster, the mass of the roller coaster, and the initial speed of the roller coaster. As given the height at A = 75 m.The gravitational potential energy at A
(Ep1) = mgh
Where, m is mass, g is acceleration due to gravity, and h is the height of the roller coaster above some reference point.
The speed of the roller coaster at point F can be found using the relation between kinetic energy and the velocity of the roller coaster at F i.e., K = 0.5mv2 where v is the velocity of the roller coaster at F.
After finding E1 and Ep2, we can calculate the velocity of the roller coaster car at F.
Using the conservation of energy principle, the velocity of the roller coaster car at F is 25 m/s.
To know more about conservation of energy, visit:
https://brainly.com/question/14867641
#SPJ11
A lamp is twice as far in front of a plane mirror as a person is. Light from the lamp reaches the person via two paths. It strikes the mirror at a 38.3° angle of incidence and reflects from it before reaching the person. The total time for the light to travel this path includes the time to travel to the mirror and the time to travel from the mirror to the person. The light also travels directly to the person without reflecting. Find the ratio of the total travel time along the reflected path to the travel time along the direct path.
The ratio of the total travel time along the reflected path to the travel time along the direct path is approximately 1.155.
Let d be the distance between the lamp and the mirror, and let 2d be the distance between the mirror and the person. Let's consider the path of light that reflects off the mirror.
By the law of reflection, the angle of incidence (i) is equal to the angle of reflection (r). Since the angle of incidence is 38.3 degrees (complement of the angle of the mirror), the angle of reflection is also 38.3 degrees.
Therefore, the path of light from the lamp to the mirror and then to the person has a total length of d + d + 2d*cos(38.3) = 3.37d. The path of light that goes directly from the lamp to the person has a length of 3d.
Therefore, the ratio of time taken along the reflected path to that along the direct path is:
t_reflected / t_direct = (3.37d) / (3d) = 1.155
The reason the reflected path takes longer is because the light has to travel further to reach the person. The light travels a distance of d to the mirror, then a distance of 2d*cos(38.3) to the person. The direct path only has a length of 3d.
Learn more about law of reflection here; brainly.com/question/46881
#SPJ11
For a certain choice of origin, the third antinode in a standing wave occurs at x3=4.875m while the 10th antinode occurs at x10=10.125 m. The wavelength, in m, is: 1.5 O None of the listed options 0.75 0.375
The third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m hence the wavelength is 0.75.
Formula used:
wavelength (n) = (xn - x3)/(n - 3)where,n = 10 - 3 = 7xn = 10.125m- 4.875m = 5.25 m
wavelength(n) = (5.25)/(7)wavelength(n) = 0.75m
Therefore, the wavelength, in m, is 0.75.
Given, the third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m.
We have to find the wavelength, in m. The wavelength is the distance between two consecutive crests or two consecutive troughs. In a standing wave, the antinodes are points that vibrate with maximum amplitude, which is half a wavelength away from each other.
The third antinode in a standing wave occurs at x3=4.875m. Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x3 + λ/2. Let us assume that the 10th antinode in a standing wave occurs at x10=10.125m.
Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x10 + λ/2.
Let us consider the distance between the two troughs:
(x10 + λ/2) - (x3 + λ/2) = x10 - x3λ = (x10 - x3) / (10-3)λ = (10.125 - 4.875) / (10-3)λ = 5.25 / 7λ = 0.75m
Therefore, the wavelength, in m, is 0.75.
To know more about antinode visit
brainly.com/question/3838585
#SPJ11
It is said, "The lightning doesn't strike twice." discuss this
statement by first describing how the lightning occurs in terms of
electrostatic forces and approve or disapprove the above statement.
P
The statement "The lightning doesn't strike twice" is not accurate in terms of electrostatic forces.
Lightning is a natural phenomenon that occurs due to the build-up of electrostatic charges in the atmosphere. It is commonly associated with thunderstorms, where there is a significant charge separation between the ground and the clouds. When the electric potential difference becomes large enough, it results in a rapid discharge of electricity known as lightning.
Contrary to the statement, lightning can indeed strike the same location multiple times. This is because the occurrence of lightning is primarily influenced by the distribution of charge in the atmosphere and the presence of conductive pathways. If a particular location has a higher concentration of charge or serves as a better conductive path, it increases the likelihood of lightning strikes.
For example, tall structures such as trees, buildings, or lightning rods can attract lightning due to their height and sharp edges. These objects can provide a more favorable path for the discharge of electricity, increasing the probability of lightning strikes.
In conclusion, the statement "The lightning doesn't strike twice" is incorrect when considering electrostatic forces. Lightning can strike the same location multiple times if the conditions are suitable, such as having a higher concentration of charge or a conductive pathway. However, it is important to note that the probability of lightning striking a specific location multiple times might be relatively low compared to other areas in the vicinity.
To know more about electrostatic forces visit,
https://brainly.com/question/20797960
#SPJ11
A 35-tum circular loop of wire is placed into a magnetic field with initial magnitude 3.7 T. The magnetic field is perpendicular to the surface of the loop. Over a period of 0.55 seconds, the strength of the field is decreased to 1.7 T and as the field decreases a 4.5 V emf is induced in the loop. Calculate the diameter of the loop of wire (Give your answer in meters but don't include the units)
A circular loop of wire with an initial magnetic field of 3.7 T experiences a decrease in field strength to 1.7 T over a period of 0.55 seconds, resulting in an induced emf of 4.5 V.
To determine the diameter of the loop, we can use the formula for the induced emf in a loop of wire.
The induced emf in a loop of wire is given by the equation emf = -N(dB/dt), where N is the number of turns in the loop and dB/dt is the rate of change of the magnetic field strength. In this case, the emf is 4.5 V, and the rate of change of the magnetic field is (3.7 T - 1.7 T) / 0.55 s.
Simplifying the equation, we have 4.5 V = -N((3.7 T - 1.7 T) / 0.55 s). Solving for N, the number of turns in the loop, we find N = -(4.5 V * 0.55 s) / (3.7 T - 1.7 T).
The diameter of the loop can be calculated using the formula diameter = 2 * radius, where the radius is given by the equation radius = sqrt(Area/π) and the area is given by the equation Area = π * (diameter/2)^2. By substituting the calculated value of N into the equation, we can solve for the diameter of the loop in meters.
To know more about induced emf click here: brainly.com/question/30891425
#SPJ11
An uncharged 1.5mf (milli farad) capacitor is connected in
series with a 2kilo ohm resistor A switch and ideal 12 volt emf
source Find the charge on the capacitor 3 seconds after the switch
is closed
The charge on the capacitor 3 seconds after the switch is closed is approximately 4.5 mC (milliCoulombs).
To calculate the charge on the capacitor, we can use the formula Q = Q_max * (1 - e^(-t/RC)), where Q is the charge on the capacitor at a given time, Q_max is the maximum charge the capacitor can hold, t is the time, R is the resistance, and C is the capacitance. Given that the capacitance C is 1.5 mF (milliFarads), the resistance R is 2 kilo ohms (kΩ), and the time t is 3 seconds, we can calculate the charge on the capacitor:
Q = Q_max * (1 - e^(-t/RC))
Since the capacitor is initially uncharged, Q_max is equal to zero. Therefore, the equation simplifies to:
Q = 0 * (1 - e^(-3/(2 * 1.5 * 10^(-3) * 2 * 10^3)))
Simplifying further:
Q = 0 * (1 - e^(-1))
Q = 0 * (1 - 0.3679)
Q = 0
Thus, the charge on the capacitor 3 seconds after the switch is closed is approximately 0 Coulombs.
Therefore, the charge on the capacitor 3 seconds after the switch is closed is approximately 0 mC (milliCoulombs).
To learn more about capacitor , click here : https://brainly.com/question/31627158
#SPJ11
A ball with an initial speed of 5.0 m/s rolls up an incline, sometime later, at a distance of 5.5 m up the incline, it has a speed of 1.5 m/s down the incline. (a) Determine: (i) its acceleration, (ii) its average velocity and (iii) the time taken to acquire this velocity. (b) At some point of the balls journey the velocity had to be zero. Where and when did this occur?
ai) the acceleration of the ball is approximately [tex]-1.73 m/s^2.[/tex] aii) the average velocity is also zero. aii) it takes approximately 2.89 seconds for the ball to acquire the velocity of 1.5 m/s.
How to determine the acceleration of the ball(a) (i) To determine the acceleration of the ball, we can use the equation:
[tex]v^2 = u^2 + 2as,[/tex]
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
Plugging in the given values:
v = 1.5 m/s,
u = 5.0 m/s,
s = 5.5 m,
We can rearrange the equation to solve for the acceleration:
a =[tex](v^2 - u^2) / (2s)[/tex]
Substituting the values:
a =[tex](1.5^2 - 5.0^2) / (2 * 5.5)[/tex]
a = (-19) / 11
a ≈ -1.73 m/s^2
Therefore, the acceleration of the ball is approximately [tex]-1.73 m/s^2.[/tex]
(ii) The average velocity of the ball can be calculated using the formula:
average velocity = total displacement / total time
In this case, the ball moves 5.5 m up the incline. Since it returns to the starting point, the total displacement is zero. Therefore, the average velocity is also zero.
(iii) The time taken to acquire the velocity of 1.5 m/s can be found using the equation:
v = u + at,
where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time taken.
Plugging in the values:
v = 1.5 m/s,
u = 5.0 m/s,
[tex]a = -1.73 m/s^2,[/tex]
We can rearrange the equation to solve for time:
t = (v - u) / a
Substituting the values:
t = (1.5 - 5.0) / (-1.73)
t ≈ 2.89 seconds
Therefore, it takes approximately 2.89 seconds for the ball to acquire the velocity of 1.5 m/s.
(b) The point where the velocity of the ball is zero can be found by analyzing the motion of the ball. Since the ball rolls up the incline and then returns to the starting point, the point where the velocity is zero occurs at the highest point of its motion, which is the point of maximum height on the incline.
Learn more about velocity at https://brainly.com/question/80295
#SPJ4
True or False: 1. Mechanical energy is the difference between kinetic and potential energy. 2. The energy output of a system is equivalent to the work done on the system.
1. "Mechanical energy is the difference between kinetic and potential energy" is true. 2. "The energy output of a system is equivalent to the work done on the system" is false.
1. True. Mechanical energy is indeed the difference between kinetic energy and potential energy. Kinetic energy is the energy associated with an object's motion, given by KE = 1/2 × m × v², where m is the mass of the object and v is its velocity. Potential energy, on the other hand, is the energy associated with an object's position or state, and it can be gravitational potential energy or elastic potential energy. The total mechanical energy (ME) is the difference between the kinetic energy and potential energy, expressed as ME = KE - PE.
2. False. The energy output of a system is not necessarily equivalent to the work done on the system. The energy output refers to the energy transferred or released by the system, which may include various forms such as mechanical work, heat, light, or other types of energy. Work done on the system specifically refers to the energy transferred to the system through mechanical work. Work is defined as the product of force and displacement, W = F × d × cos(theta), where F is the applied force, d is the displacement, and theta is the angle between the force and displacement vectors. While work can contribute to the energy output of a system, other forms of energy transfer, such as heat or radiation, can also be involved. Therefore, the energy output of a system is not always equivalent to the work done on the system.
To learn more about Mechanical energy, Visit:
https://brainly.com/question/30403434
#SPJ11
OUT SHOW HINE Question 14 (1 points) Darcy suffers from farsightedness equally severely in both eyes. The focal length of either of Darey's eyes is 196 mm in its most accommodated state when the eye is focusing on the closest object that it can clearly see) Whatlens strength (aka, len power) of contact lenses should be prescribed to correct the forsightedness in Darcys tryes? When wearing her contact lenses, Darcy's corrected near point should be 25.0cm. (Assume the lens to retina distance of Darcy's eyes is 200 cm, and the contact lenses are placed a neqiqbly small distance from the front of Darcy's eyes) Select the correct answer 0 2.19 D 0 2.450 O 1.920 3.750 O 2.900 od CHECK ANSWER 2of checks used LAST ATTEMPT
The lens power is approximately 24.0 D.
To correct Darcy's farsightedness, we can use the lens formula:
1/f = 1/v - 1/u
Where:
f is the focal length of the lens,
v is the image distance (lens to retina distance),
u is the object distance (closest clear object distance from the eye).
Given that the focal length of Darcy's eyes in their most accommodated state is 196 mm (0.196 m) and the corrected near point is 25.0 cm (0.25 m), we can substitute these values into the lens formula:
1/0.196 = 1/0.25 - 1/u
Simplifying this equation, we find:
u = 0.0416 m
Now, since the contact lenses are placed a negligibly small distance from the front of Darcy's eyes, the object distance (u) is approximately equal to the focal length (f) of the contact lens. Therefore, we need to find the focal length of the contact lens that matches the object distance.
Thus, the lens power or lens strength of the contact lenses needed to correct Darcy's farsightedness is approximately 1/u = 1/0.0416 = 24.0384 D.
Rounding to three significant figures, the lens power is approximately 24.0 D.
for more such questions on power
https://brainly.com/question/1634438
#SPJ8
A beam of light reflects and refracts at point A on the interface between material 1 (n1 = 1.33) and material 2 (n2 = 1.66). The incident beam makes an angle of 40° with the interface. What is the angle of reflection at point A?
The angle of reflection at point A is 40°, which is equal to the angle of incidence.
When a beam of light encounters an interface between two different materials, it undergoes reflection and refraction. The angle of incidence, which is the angle between the incident beam and the normal to the interface, is equal to the angle of reflection, which is the angle between the reflected beam and the normal to the interface.
In this case, the incident beam makes an angle of 40° with the interface, so the angle of reflection at point A is also 40°. When light travels from one medium to another, it changes its direction due to the change in speed caused by the change in refractive index.
The law of reflection states that the angle of incidence is equal to the angle of reflection. This means that the angle at which the light ray strikes the interface is the same as the angle at which it bounces off the interface.
In this scenario, the incident beam of light strikes the interface between material 1 and material 2 at an angle of 40°. According to the law of reflection, the angle of reflection is equal to the angle of incidence, so the light ray will bounce off the interface at the same 40° angle with respect to the normal.
Learn more about reflection
brainly.com/question/30031394
#SPJ11
22 for Li. Use Appendix D. 11. (11) Calculate the binding energy of the last neutron in a ' C nucleus. (Hint: compare the mass of 'C with that of .C + ón; use Appendix D.] 25. (III) In decay of, say, a " nucleus carries away a fract energy available, where A daughter nucleus.
11. The binding energy of the last neutron in a 'C nucleus is 7.47 MeV.
25. The fraction of energy carried away by the alpha particle in the decay of a 'C nucleus is 0.80, or 80%.
11. The binding energy of the last neutron in a 'C nucleus can be calculated using the following formula:
BE = (m_(C-n) - m_C - m_n) * c^2
where:
BE is the binding energy (in MeV)
m_(C-n) is the mass of the 'C-n nucleus (in kg)
m_C is the mass of the 'C nucleus (in kg)
m_n is the mass of the neutron (in kg)
c is the speed of light (in m/s)
The masses of the nuclei and neutrons can be found in Appendix D.
Plugging in the values, we get:
BE = (11.996915 u - 11.992660 u - 1.008665 u) * (931.494 MeV/u)
BE = 7.47 MeV
25. In the decay of a 'C nucleus, the alpha particle carries away about 80% of the energy available. This is because the alpha particle is much lighter than the 'C nucleus, so it has a higher kinetic energy. The daughter nucleus, 'N, is left with about 20% of the energy available. This energy is released as gamma rays.
The fraction of energy carried away by the alpha particle can be calculated using the following formula:
f = (m_(C) - m_(alpha) - m_(N)) * c^2 / m_(C) * c^2
where:
f is the fraction of energy carried away by the alpha particle
m_(C) is the mass of the 'C nucleus (in kg)
m_(alpha) is the mass of the alpha particle (in kg)
m_(N) is the mass of the 'N nucleus (in kg)
c is the speed of light (in m/s)
Plugging in the values, we get:
f = (11.996915 u - 4.002603 u - 14.003074 u) * (931.494 MeV/u) / 11.996915 u * (931.494 MeV/u)
f = 0.80 = 80%
To learn more about kinetic energy: https://brainly.com/question/30107920
#SPJ11
a-e
please
An RLC series circuit has a 2.40 2 resistor, a 120 µH inductor, and a 78.0 µF capacitor. (a) Find the circuit's impedance (in 22) at 120 Hz. 10.2 X 2 (b) Find the circuit's impedance (in ) at 5.00 k
An RLC series circuit is an electrical circuit that consists of a resistor (R), an inductor (L), and a capacitor (C) connected in series.
The answers are:
a) The impedance of the RLC series circuit at 120 Hz is 217.4 Ω.
b) The impedance of the RLC series circuit at 5.00 kHz is 37.9 Ω.
The components are connected one after the other, forming a single loop for the flow of current. The resistor (R) provides resistance to the flow of current, converting electrical energy into heat.
The impedance determines how the circuit responds to different frequencies of alternating current. At certain frequencies, the impedance may be minimal, resulting in resonance, while at other frequencies, the impedance may be high, leading to a reduction in current flow.
RLC series circuits are widely used in electronics and electrical systems for various applications, such as filtering, signal processing, and frequency response analysis.
(a) To find the impedance of the RLC series circuit at 120 Hz, we need to consider the resistive, inductive, and capacitive components.
The impedance (Z) of the circuit can be calculated using the formula:
[tex]Z = \sqrt(R^2 + (XL - XC)^2)[/tex]
where:
R = resistance = 2.40 Ω
XL = inductive reactance = 2πfL, where f is the frequency and L is the inductance
XC = capacitive reactance = 1/(2πfC), where f is the frequency and C is the capacitance
Given:
[tex]L = 120\mu H = 120 * 10^{-6} H[/tex]
[tex]C = 78.0 \mu F = 78.0 * 10^{-6} F[/tex]
f = 120 Hz
Now we can calculate the impedance:
[tex]XL = 2\pi fL = 2\pi (120 Hz)(120 * 10^{-6} H)\\XC = 1/(2\pi fC) = 1/(2\pi (120 Hz)(78.0 * 10^{-6} F))[/tex]
Calculate XL and XC:
XL = 0.0902 Ω
XC = 217.3 Ω
Substitute the values into the impedance formula:
[tex]Z = \sqrt(2.40^2 + (0.0902 - 217.3)^2)[/tex]
Calculate Z:
Z = 217.4 Ω
Therefore, the impedance of the RLC series circuit at 120 Hz is 217.4 Ω.
(b) To find the impedance of the RLC series circuit at 5.00 kHz, we follow the same steps as in part (a), but with a different frequency.
Given:
[tex]f = 5.00 kHz = 5.00 * 10^3 Hz[/tex]
Calculate XL and XC using the new frequency:
[tex]XL = 2\pi fL = 2\pi (5.00 * 10^3 Hz)(120 × 10^{-6} H)\\XC = 1/(2\pi fC) = 1/(2\pi (5.00 * 10^3 Hz)(78.0 * 10^{-6} F))[/tex]
Calculate XL and XC:
XL = 37.7 Ω
XC = 3.40 Ω
Substitute the values into the impedance formula:
[tex]Z = \sqrt(2.40^2 + (37.7 - 3.40)^2[/tex])
Calculate Z:
Z = 37.9 Ω
Therefore, the impedance of the RLC series circuit at 5.00 kHz is 37.9 Ω.
For more details regarding the RLC series circuit, visit:
https://brainly.com/question/31322318
#SPJ4
Hence, the circuit's impedance is (2.40 - j2.64) Ω.
The given values are
Resistance, R = 2.40 Ω
Inductance, L = 120 µH
Capacitance, C = 78.0 µF
Frequency, f = 120 Hz = 0.120 kHz
Impedance formula for an RLC circuit is,
Z = R + j (XL - XC)
Here, XL is the inductive reactance, and XC is the capacitive reactance.
They are given by,
XL = 2πfL
XC = 1/2πfC
(a) At 120 Hz,
XL = 2πfL
= 2 × 3.14 × 120 × 120 × 10⁻⁶
= 90.76 ΩXC
= 1/2πfC
= 1/2 × 3.14 × 120 × 78.0 × 10⁻⁶
= 169.58 Ω
So, the impedance of the circuit is,
Z = R + j (XL - XC)
= 2.40 + j (90.76 - 169.58)
≈ 2.40 - j78.82 Ω
(b) At 5.00 kHz,
XL = 2πfL
= 2 × 3.14 × 5 × 10³ × 120 × 10⁻⁶
= 37.68 ΩXC
= 1/2πfC
= 1/2 × 3.14 × 5 × 10³ × 78.0 × 10⁻⁶
= 40.32 Ω
So, the impedance of the circuit is,
Z = R + j (XL - XC)
= 2.40 + j (37.68 - 40.32)
≈ 2.40 - j2.64 Ω
Learn more about impedance from the given link
https://brainly.com/question/31369031
#SPJ11
"The critical angle of a piece of transparent material in air is
37.3o. What is the critical angle of the same material
when it is immersed in water? (n = 1.33)
A. 41.4o
B. 63.0o
C> 53.7o
D. 48.4o
E. 68.2o"
The critical angle (θc) can be determined using Snell's Law, which states:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Where:
n₁ is the refractive index of the initial medium (air) and is equal to 1.
θ₁ is the angle of incidence in the initial medium.
n₂ is the refractive index of the second medium (water) and is equal to 1.33.
θ₂ is the angle of refraction in the second medium.
We are given θ1 = 37.3° and n₁ = 1 (for air), and we need to find θ₂.
Using Snell's Law:
1 * sin(37.3°) = 1.33 * sin(θ₂)
sin(θ₂) = (1 * sin(37.3°)) / 1.33
θ₂ = arcsin((1 * sin(37.3°)) / 1.33)
Calculating this value gives us:
θ₂ ≈ 41.4°
Therefore, the critical angle of the material when immersed in water is approximately 41.4°.
The correct option is A. 41.4°.
https://brainly.com/question/15009181
#SPJ11
Your friends play a practical joke on you by shutting off the power to your room. It is really dark, so you decide to feel around for a way to make a light. You find a 14.0V battery, wires, and some flashlight bulbs that just happen to be there. The bulbs available are rated for 3.0V and are rated 2.5 Watts at that voltage. The bulb will burn out very quickly if it experiences more than a 3.0V potential drop across it. You also happen to have a circuit kit with a bunch of resistors in there. You want to calculate the resistor you need to add to the circuit so you won't burn out the bulb. You need to calculate this in advance because you only have a few matches in your pocket to light the room to look for the resistor.What value resistor do you need?
Ω
How much power will the resistor dissipate?
W
To avoid burning out the 3.0V flashlight bulb, you need to determine the value of the resistor that will limit the potential drop across the bulb.
Let's assume the resistance of the bulb is RB.
The power (P) of the bulb can be calculated using the formula:
P = V^2 / R, where V is the voltage across the bulb (3.0V) and R is the resistance of the bulb (RB).
Since we know the power of the bulb is 2.5 Watts, we can set up the equation: 2.5 = 3.0^2 / RB.
Simplifying the equation:2.5 = 9 / RB.
Cross-multiplying:2.5 * RB = 9.
Dividing both sides by 2.5: RB = 9 / 2.5.
Calculating the result:
RB ≈ 3.6 Ω.
Therefore, you need a resistor with a value of approximately 3.6 Ω to avoid burning out the flashlight bulb when connected to the 14.0V battery.
To learn more about resistor click here.
brainly.com/question/32412673
#SPJ11
the position of an oscillator is given by x=(2.5m) cos[(48s^-1)] what is the frequency if this motion
The frequency of the given motion is 48 Hz.
The equation given represents simple harmonic motion, where the position of the oscillator varies sinusoidally with time. The amplitude of the motion is given as 2.5 m and the argument of the cosine function represents the angular frequency of the motion, which is
[tex]48 s^-1[/tex]
The frequency of the motion can be calculated by dividing the angular frequency by 2π, since frequency is the number of oscillations per second. Therefore,
f = ω/2π = 48/(2π) = 7.62 Hz.
Hence, the frequency of the given motion is 48 Hz.
To learn more about frequency click brainly.com/question/254161
#SPJ11
A diverging lens has a focal length of -30.0 cm. Locate the images for each of the following object distances. For each case, state whether the image is real or virtual and upright or inverted, and find the magnification. (a) 60.0 cm cm --Location of image-- O real, erect O real, inverted O virtual, erect O virtual, inverted X cm|--Location of image-- cm --Location of image-- magnification (b) 30.0 cm O real, erect O real, inverted O virtual, erect O virtual, inverted magnification (c) 15.0 cm O real, erect O real, inverted O virtual, erect O virtual, inverted magnification
(a) Object distance = 60.0 cm:Image location = 20.0 cm, Virtual, Upright, Magnification = -1/3. (b) Object distance = 30.0 cm. C) The image distance is 15.0 cm.
Image To locate the images formed by a diverging lens and determine their characteristics, we can use the lens formula and the magnification formula. The lens formula is given by: 1/f = 1/dₒ - 1/dᵢ where f is the focal length of the lens, dₒ is the object distance, and dᵢ is the image distance.The magnification formula is given by: magnification = -dᵢ/dₒ where magnification represents the ratio of the image height to the object height.
Let's analyze each case:
(a) Object distance = 60.0 cm ,Using the lens formula: 1/f = 1/dₒ - 1/dᵢ
Substituting the given values: 1/-30.0 = 1/60.0 - 1/dᵢ
Solving for dᵢ: 1/dᵢ = 1/60.0 - 1/-30.0
1/dᵢ = (1 - (-2))/60.0
1/dᵢ = 3/60.0
dᵢ = 20.0 cm
The image distance is 20.0 cm.
The characteristics of the image:- Image is virtual (since the image distance is positive for a diverging lens). Image is upright (since the magnification is positive). Magnification = -dᵢ/dₒ = -20.0/60.0 = -1/3.
(b) Object distance = 30.0 cm,Using the lens formula:1/f = 1/dₒ - 1/dᵢ
Substituting the given values:1/-30.0 = 1/30.0 - 1/dᵢ,
Solving for dᵢ:1/dᵢ = 1/30.0 - 1/-30.0
1/dᵢ = (1 + 1)/30.0
1/dᵢ = 2/30.0
dᵢ = 15.0 cm
The image distance is 15.0 cm. The characteristics of the image: - Image is real (since the image distance is negative for a diverging lens). Image is inverted (since the magnification is negative). Magnification = -dᵢ/dₒ = -15.0/30.0 = -1/2.
(c) Object distance = 15.0 cm,Using the lens formula:1/f = 1/dₒ - 1/dᵢ,Substituting the given values:1/-30.0 = 1/15.0 - 1/dᵢ
Solving for dᵢ:1/dᵢ = 1/15.0 - 1/-30.0
1/dᵢ = (2 - 1)/15.0
1/dᵢ = 1/15.0
dᵢ = 15.0 cm
The image distance is 15.0 cm.
The characteristics of the image:- Image is real (since the image distance is negative for a diverging lens). Image is inverted (since the magnification is negative).Magnification = -dᵢ/dₒ = -15.0/15.0 = -1.
To know more about Magnification formula visit-
brainly.com/question/30402564
#SPJ11
In a Young's double-slit experiment the wavelength of light used is 472 nm (in vacuum), and the separation between the slits is 1.7 × 10-6 m. Determine the angle that locates (a) the dark fringe for which m = 0, (b) the bright fringe for which m = 1, (c) the dark fringe for which m = 1, and (d) the bright fringe for which m = 2.
Young's double-slit experiment is a phenomenon that shows the wave nature of light. It demonstrates the interference pattern formed by two coherent sources of light of the same frequency and phase.
The angle that locates the (a) dark fringe is 0.1385°, (b) bright fringe is 0.272°, (c) dark fringe is 0.4065°, and (d) bright fringe is 0.5446°.
The formula to calculate the angle is; [tex]θ= λ/d[/tex]
(a) To determine the dark fringe for which m=0;
The formula for locating dark fringes is
[tex](m+1/2) λ = d sinθ[/tex]
sinθ = (m+1/2) λ/d
= (0+1/2) (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.1385°
(b) To determine the bright fringe for which m=1;
The formula for locating bright fringes is [tex]mλ = d sinθ[/tex]
[tex]sinθ = mλ/d[/tex]
= 1 x (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.272°
(c) To determine the dark fringe for which m=1;
The formula for locating dark fringes is [tex](m+1/2) λ = d sinθ[/tex]
s[tex]inθ = (m+1/2) λ/d[/tex]
= (1+1/2) (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.4065°
(d) To determine the bright fringe for which m=2;
The formula for locating bright fringes is mλ = d sinθ
[tex]sinθ = mλ/d[/tex]
= 2 x (472 x 10^-9)/1.7 × 10^-6
sinθ = 0.5446°
Thus, the angle that locates the (a) dark fringe is 0.1385°, (b) bright fringe is 0.272°, (c) dark fringe is 0.4065°, and (d) bright fringe is 0.5446°.
To learn more about frequency visit;
https://brainly.com/question/29739263
#SPJ11
A car of mass 1.5x 105 kg is initially travelling at a speed of 25 m/s. The driver then accelerates to a speed of 40m/s over a distance of 0.20 km. Calculate the work done on the car. 3.8x10^5 J 7.3x10^7 7.3x10^5J 7.3x10^3
The work done on the car is 7.3x10⁷ J.
To calculate the work done on the car, we can use the work-energy principle, which states that the work done on an object is equal to the change in its kinetic energy. The kinetic energy of an object is given by the equation KE = (1/2)mv² , where m is the mass of the object and v is its velocity.
Given:
Mass of the car, m = 1.5x10⁵ kg
Initial velocity, u = 25 m/s
Final velocity, v = 40 m/s
Distance traveled, d = 0.20 km = 200 m
First, we need to calculate the change in kinetic energy (ΔKE) using the formula ΔKE = KE_final - KE_initial. Substituting the given values into the formula, we have:
ΔKE = (1/2)m(v² - u² )
Next, we substitute the values and calculate:
ΔKE = (1/2)(1.5x10⁵ kg)((40 m/s)² - (25 m/s)²)
= (1/2)(1.5x10⁵ kg)(1600 m²/s² - 625 m²/s²)
= (1/2)(1.5x10⁵ kg)(975 m²/s²)
= 73125000 J
≈ 7.3x10⁷ J
Therefore, the work done on the car is approximately 7.3x10⁷J.
The work-energy principle is a fundamental concept in physics that relates the work done on an object to its change in kinetic energy. By understanding this principle, we can analyze the energy transformations and transfers in various physical systems. It provides a quantitative measure of the work done on an object and how it affects its motion. Further exploration of the relationship between work, energy, and motion can deepen our understanding of mechanics and its applications in real-world scenarios.
Learn more about work done
brainly.com/question/32263955
#SPJ11
19)Rayleigh's criteria for resolution You are reading one of those incredibly factual articles in the "International Inquirer", and it informs you that supersecret CIA spy cameras aboard super-secret satellites are able to read a letter between Presidents Putin and Trump that is sitting on the President's desk, next to his pool, on his roof top vacation office just outside Moscow. After giving it some thought, you realize that, in order to do this, the super-secret spy camera would have to be able to resolve ink dots that are only 0.50 mm (or 5.00×10−4 m ) apart. The article tells you that the secret spy camera is in a low Earth orbit, 135 miles (or 2.17×105 m ) above the Earth's surface. You are skeptical and decide to do a quick calculation. Assuming the super-secret spy camera is using yellowish-green visible light having a wavelength of 5.55×10−7 m, what would the
The diameter of the lens or aperture of the super-secret spy camera would need to be approximately 2.67 cm in order to resolve ink dots that are 0.50 mm apart.
To determine if the super-secret spy camera can resolve ink dots that are 0.50 mm (5.00 × 10^-4 m) apart, we can use Rayleigh's criterion for resolution:
θ = 1.22 * (λ / D)
where:
θ is the angular resolution (in radians)
λ is the wavelength of light (5.55 × 10^-7 m)
D is the diameter of the lens or aperture of the camera
We can rearrange the equation to solve for D:
D = 1.22 * (λ / θ)
Given that the camera is in a low Earth orbit 135 miles above the Earth's surface (2.17 × 10^5 m), we can calculate the angular resolution:
θ = (0.50 mm / 2.17 × 10^5 m)
Substituting the values into the equation, we have:
D = 1.22 * (5.55 × 10^-7 m / (0.50 mm / 2.17 × 10^5 m))
Simplifying the equation, we find:
D ≈ 2.67 cm
Therefore, the diameter of the lens or aperture of the super-secret spy camera would need to be approximately 2.67 cm in order to resolve ink dots that are 0.50 mm apart.
Learn more diameter here:
https://brainly.com/question/23220731
#SPJ11
A string is fixed at both ends. The mass of the string is 0.0010 kg and the length is 2.55 m. The string is under a tension of 220 N. The string is driven by a variable frequency source to produce standing waves on the string. Find the wavelengths and frequencies of the first four modes of standing waves.
In this standing wave, For the first mode, n = 1, λ = 5.10 m. For the second mode, n = 2, λ = 2.55 m. For the third mode, n = 3, λ = 1.70 m. For the fourth mode, n = 4, λ = 1.28 m.
Standing waves are produced by interference of waves traveling in opposite directions. The standing waves have nodes and antinodes that do not change their position with time. The standing waves produced by the string are due to the reflection of waves from the fixed ends of the string.
The frequency of the standing waves depends on the length of the string, the tension, and the mass per unit length of the string. It is given that the tension of the string is 220 N. The mass of the string is 0.0010 kg and the length is 2.55 m. Using the formula for the velocity of a wave on a string v = sqrt(T/μ) where T is the tension and μ is the mass per unit length. The velocity is given by v = sqrt(220/0.0010) = 1483.24 m/s.
The frequency of the standing wave can be obtained by the formula f = nv/2L where n is the number of nodes in the standing wave, v is the velocity of the wave, and L is the length of the string. For the first mode, n = 1, f = (1 × 1483.24)/(2 × 2.55) = 290.98 Hz.
For the second mode, n = 2, f = (2 × 1483.24)/(2 × 2.55) = 581.96 Hz. For the third mode, n = 3, f = (3 × 1483.24)/(2 × 2.55) = 872.94 Hz.
For the fourth mode, n = 4, f = (4 × 1483.24)/(2 × 2.55) = 1163.92 Hz. The wavelengths of the standing waves can be obtained by the formula λ = 2L/n where n is the number of nodes. For the first mode, n = 1, λ = 2 × 2.55/1 = 5.10 m. For the second mode, n = 2, λ = 2 × 2.55/2 = 2.55 m. For the third mode, n = 3, λ = 2 × 2.55/3 = 1.70 m. For the fourth mode, n = 4, λ = 2 × 2.55/4 = 1.28 m.
Know more about standing wave here:
https://brainly.com/question/14176146
#SPJ11
Two piloted satellites approach one another at a relative speed of 0.210m/s, intending to dock. The first has a mass of 4.70×103kg, and the second a mass of 7.55×103kg. If the two satellites collide elastically rather than dock, what is their final relative velocity?
We can solve these equations simultaneously to find the final velocities v₁f and v₂f. However, without additional information, we cannot determine their exact values.
In an elastic collision, both momentum and kinetic energy are conserved.
Let's denote the initial velocities of the first and second satellite as v₁i and v₂i, respectively, and their final velocities as v₁f and v₂f.
According to the conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision:
[tex]m₁ * v₁i + m₂ * v₂i = m₁ * v₁f + m₂ * v₂f[/tex]₁ * v₁i + m₂ * v₂i = m₁ * v₁f + m₂ * v₂f
where:
m₁ and m₂ are the masses of the first and second satellite, respectively.
According to the conservation of kinetic energy, the total kinetic energy before the collision is equal to the total kinetic energy after the collision:
[tex](1/2) * m₁ * v₁i^2 + (1/2) * m₂ * v₂i^2 = (1/2) * m₁ * v₁f^2 + (1/2) * m₂ * v₂f^2[/tex]
In this case, the initial velocity of the first satellite (v₁i) is 0.210 m/s, and the initial velocity of the second satellite (v₂i) is -0.210 m/s (since they are approaching each other).
Substituting the values into the conservation equations, we can solve for the final velocities:
[tex]m₁ * v₁i + m₂ * v₂i = m₁ * v₁f + m₂ * v₂f[/tex]
[tex](1/2) * m₁ * v₁i^2 + (1/2) * m₂ * v₂i^2 = (1/2) * m₁ * v₁f^2 + (1/2) * m₂ * v₂f^2[/tex]
Substituting the masses:
[tex]m₁ = 4.70 × 10^3 kg[/tex]
[tex]m₂ = 7.55 × 10^3 kg[/tex]
And the initial velocities:
[tex]v₁i = 0.210 m/s[/tex]
We can solve these equations simultaneously to find the final velocities v₁f and v₂f. However, without additional information, we cannot determine their exact values.
Learn more about velocities from the given link
https://brainly.com/question/80295
#SPJ11