configuration management is concerned with what? select the best answer. a. hardware changes b. software changes c. documentation changes d. acquiring signoff for any changes e. configuration policy changes 1. a, b, c, d, e 2. a, b, c 3. a, b 4. d, e 5. a, b, d

The commands that can be used to save and undo table changes are "commit and rollback".Answer: c. commit and rollback

To perform transactions in the database, the SQL provides the following four important commands:commit: If a transaction is successful, the commit command is used to save the changes. rollback: In the case of an error or as per the user’s need, the rollback command is used to undo the changes made in the table. The entire transaction is rolled back when the rollback command is executed. save: It stores the data or transaction from the session in the database memory temporarily. The save command does not store it permanently. The save command saves the specified data points at the moment, but not in the memory. commit and rollback are the two primary commands that are used to save and undo table changes. In addition, the save command is used to store data in memory temporarily, and the undo command is not a SQL command.

learn more about commit and rollback here:

https://brainly.com/question/29853510

#SPJ11

This process of fragmentation allows packets to be Transmitted across a network despite the limitations of the maximum transfer unit.

When a packet of 4000 bytes with an IP header of 20 bytes and 3980 bytes of data is transmitted through a link with a maximum transfer unit (MTU) of 1500 bytes, it will need to be fragmented into multiple packets. The maximum size of each fragment will be 1480 bytes (1500 - 20 bytes of IP header).

To determine the number of fragments, we first need to calculate the total number of bytes that need to be transmitted (including the IP header). This would be 4020 bytes (4000 + 20 bytes of IP header). Next, we divide this number by the MTU size of 1500 bytes to get the number of fragments required. This comes out to be 3 fragments.

The first fragment will have the length field set to 1500, the identifier field will be set to x, the flag field will be set to 1 (indicating that this is the first fragment), and the offset field will be set to 0.

The second fragment will have the length field set to 1500, the identifier field will be set to x, the flag field will be set to 1 (indicating that this is the second fragment), and the offset field will be set to 1480 (since the first fragment has already taken up the first 1480 bytes of the original packet).

The third fragment will have the length field set to 1040, the identifier field will be set to x, the flag field will be set to 0 (indicating that this is the last fragment), and the offset field will be set to 2960 (since the first two fragments have already taken up the first 2960 bytes of the original packet).

Overall, this process of fragmentation allows packets to be transmitted across a network despite the limitations of the maximum transfer unit. Each fragment is still able to carry all the necessary information and can be reassembled at the destination to form the original packet.

To Learn More About Transmitted

https://brainly.com/question/30244668

SPJ11

The statement that is true about the insertion of a new node in an AVL tree is: avltreeinsert updates heights on all ancestors before inserting the node.

The statement that is true about the insertion of a new node in an AVL tree is avltreeinsert updates heights on all ancestors before inserting the node. What is an AVL  tree . An AVL tree is a self-balancing binary search tree in which each node has a balance factor of either -1, 0, or 1. Balance factors are the difference between the heights of the left and right subtrees. If a node's balance factor is outside of the range [-1, 0, 1], the tree is unbalanced, and rotations are performed to restore the balance during operations such as insertion, deletion, and search. When inserting a new node in an AVL tree, the heights of all ancestors before inserting the node are updated. This is done to check whether the balance factor of any ancestor is outside the range [-1, 0, 1] and if so, rotations are performed to restore the balance of the tree. Therefore, the statement that is true about the insertion of a new node in an AVL tree is avltreeinsert updates heights on all ancestors before inserting the node.

learn more about Ancestors here :

https://brainly.com/question/18696813

#SPJ11

After selecting the column header arrow for the column with the heading "marks", Shelley can follow these steps to see the names of students who scored exactly 60 marks:

Click on the "Filter" option in the dropdown menu that appears after selecting the column header arrow.

In the filter options, choose the option for "Equals" or "is equal to" (the wording may vary depending on the software/application being used).

Enter "60" in the text box that appears next to the "Equals" option.

Click "OK" or "Apply" to apply the filter.

This should filter the table to show only the rows where the marks column contains the value "60", which will allow Shelley to see the names of the students who scored exactly 60 marks.

Read more about database here:

https://brainly.com/question/518894

#SPJ1

The result of applying softmax when the output of the neural network is (0.4,2.0,0.001,0.32)% is (0.091,0.731,0.001,0.176).

Softmax function is a very useful activation function that helps in producing probability distribution over multiple classes. In general, it is used in the last layer of neural networks as it converts the output of the previous layer into a probability distribution.

The softmax function is represented as:

f(z) = ez/∑jez

Where j is the index of classes, z is the input of the softmax function, and f(z) is the output of the softmax function. It returns a probability distribution among the output classes. Hence, the result of applying softmax when the output of the neural network is (0.4,2.0,0.001,0.32)% is (0.091,0.731,0.001,0.176).

You can learn more about neural networks at: brainly.com/question/14632443

#SPJ11

Using the provided statistics, the statement that is true is that the average bandwidth per internet connection in Burundi decreased from 11.24 kb/s in 2015 to 6.91 kb/s in 2016. This means that the average speed at which data is transmitted over the internet in Burundi decreased over the course of a year.

The decrease in average bandwidth per internet connection could be attributed to a number of factors, including a decrease in internet infrastructure investment or the increase in the number of internet users without a corresponding increase in infrastructure. This decrease in bandwidth could have significant impacts on internet users in Burundi, including slower internet speeds, longer download times, and difficulty streaming videos or other multimedia.

For such more question on bandwidth

https://brainly.com/question/12908568

#SPJ11

The type of password attack that is used on weak passwords and compares a hashed value of the passwords to the system password file to find a match is known as a dictionary attack.

A dictionary attack is a type of password attack in which an attacker uses a precompiled list of words, often drawn from a dictionary, and compares each word's hashed value to the password hash in the system password file to find a match. This type of attack is effective on weak passwords that can be easily guessed by an attacker.

It is important to use strong passwords that are difficult to guess in order to prevent successful dictionary attacks. Additionally, system administrators can implement measures such as salting and hashing to make it more difficult for attackers to obtain a user's password.

You can learn more about password attacks at: brainly.com/question/30739304

#SPJ11

Prototyping is a useful tool to help spot potential flaws and identify areas for improvement, reducing the likelihood of design errors. Prototyping helps in a more detailed and better analysis of data, facilitating better decision-making. Prototyping is used as an effective communication tool between the team and clients.

Advantages of Prototyping: Here are the advantages of prototyping: Prototyping enables a preview of the product or process. It allows businesses to have an idea of how their product or service will look before they invest in it completely.

Disadvantages of Prototyping: Here are the disadvantages of prototyping: The process of prototyping can be expensive in both time and money. It can also delay the final product from being completed. Poor communication between the development team and the client can cause errors to go unnoticed, rendering the prototype irrelevant. There is a chance that prototyping may not be useful when building larger systems. This is due to the complexity of the system and the number of components involved.

Testing: Once the prototype has been built, it is tested by the team and/or the users to identify any flaws or bugs. Feedback is then provided for improvement. Improving: Based on the feedback, the team can identify areas for improvement and work on them until they come up with the final product.

Circumstances under which prototyping might be useful: Prototyping is useful under these circumstances: Prototyping is useful when creating a new product or process. It allows the team to get a clear idea of what they are building and how it will look. Prototyping is useful when designing user interfaces. It enables designers to create a working interface, allowing users to provide feedback and identify areas for improvement.
The advantages of prototyping include the ability to identify design flaws early, gather user feedback, and improve communication among team members. Disadvantages of prototyping include the potential for wasted resources, insufficient analysis, and misleading results.

The steps in prototyping are:
1. Define objectives: Determine the purpose and goals of the prototype.
2. Create a design: Sketch or model the prototype based on the objectives.
3. Build the prototype: Construct the prototype using appropriate materials and tools.
4. Evaluate and refine: Test the prototype, gather feedback, and make improvements as necessary.
5. Finalize the design: Complete the design based on the evaluation results and prepare for implementation.

Two circumstances under which prototyping might be useful are:
1. When developing a new product or system, it helps identify potential issues and gather user feedback before committing to full-scale production.
2. When making changes to an existing product or system, it allows testing of new features or modifications without disrupting the current implementation.

Learn more about Prototype:

https://brainly.com/question/28187820

#SPJ11

Project management that is differences between the two versions of the JWD Consulting case study are the project management methodologies used: a more prescriptive approach and an agile approach.

A prescriptive approach focuses on detailed planning, documentation, and strict control over the project, while the agile approach emphasizes collaboration, flexibility, and iterative progress.

You should use a more prescriptive approach when the project requirements are clear, stable, and well-defined. On the other hand, an agile approach is more suitable when the project requirements are uncertain or prone to change, and there is a need for frequent communication and adaptation.

It is likely that users of the JWD Consulting Intranet site would prefer several incremental releases of the software rather than one big release. This approach allows users to receive updates and improvements more frequently and enables developers to gather feedback and make changes based on user needs more effectively.

Some pros of the prescriptive approach include better control over the project, a clear project roadmap, and thorough documentation. However, it can be less flexible and responsive to changes, and it may lead to increased project risks and delayed results.

On the other hand, some pros of the agile approach include flexibility, faster delivery of incremental features, and better adaptability to changing requirements. However, it may lack detailed documentation and can be challenging to manage if the team is not experienced with the agile methodology.

Learn more about Project management: https://brainly.com/question/17313957

#SPJ11

To connect separate networks together in your company, an appropriate network device would be a router. A router is designed to forward data packets between different networks, providing a connection between them.

Step-by-step explanation:
1. Identify the networks you want to connect.
2. Determine the number of ports needed on the router, based on the number of networks you wish to connect.
3. Purchase a suitable router with the required number of ports.
4. Configure the router with the necessary settings, such as IP addresses and routing protocols, to enable communication between the separate networks.
5. Connect the router to the different networks using appropriate cables.
6. Test the connection and make any necessary adjustments to ensure smooth communication between the networks.

You can learn more about routers at: brainly.com/question/29869351

#SPJ11

Answer:

import java.io.File;

import java.io.FileNotFoundException;

import java.util.*;

class Main {

 public static void main(String[] args) {

 try {

  Scanner scanner = new Scanner(new File("scores.txt"));

     int nrAthletes = scanner.nextInt();

     ArrayList<String> athletes = new ArrayList<String>();

     int winnerIndex = 0;

     Double highestAverage = 0.0;

  for(int i=0; i<nrAthletes; i++) {

       // Get the name of the athlete as the first item

       String athleteName = scanner.next();

       athletes.add(athleteName);

       // Start collecting scores

       ArrayList<Double> scores = new ArrayList<Double>();        

       while(scanner.hasNextDouble()) {

         scores.add(scanner.nextDouble());

       }

       // Remove lowest and highest

       scores.remove(Collections.min(scores));

       scores.remove(Collections.max(scores));

       // Calculate average

       double sum = 0.0;

       for(double score: scores) {

         sum += score;

       }

       Double averageScore = sum / scores.size();

       // Keep track of winner

       if (averageScore >= highestAverage) {

         highestAverage = averageScore;

         winnerIndex = i;

       }

       // Output to screen

      System.out.printf("%s %.2f\n", athleteName, averageScore );

  }

     // Output winner

     System.out.printf("Winner: %s\n", athletes.get(winnerIndex) );

  scanner.close();

 } catch (FileNotFoundException e) {

  e.printStackTrace();

 }

 }

}

Explanation:

Of course this code lacks error handling, but it shows an approach using the scanner object and array lists.

The resources that are loaded using the hypertext transfer protocol are web page and map graphics.

It contains a variety of information, such as text, images, videos, and links, that are displayed on a computer or mobile device using a web browser. HTML, CSS, and JavaScript are commonly used to create web pages.What are map graphics Map graphics are visual representations of geographic data, such as maps, charts, graphs, and diagrams. They are often used to help users understand complex data or information by presenting it in a more understandable and engaging format. Map graphics are commonly used in websites, mobile applications, and other digital products to provide location-based information and services.What is the hypertext transfer protocol?The hypertext transfer protocol (HTTP) is a protocol that is used to transfer data over the internet. It is the foundation of data communication on the World Wide Web and is responsible for fetching web pages, images, and other resources from web servers to user devices. HTTP is the underlying protocol used by browsers to communicate with web servers and is responsible for delivering web pages and other resources to users.

Learn more about web page here:

https://brainly.com/question/8307503

#SPJ11

Answer:

umm probably white or any light color

Explanation:

cuz if you put similar colors whether color or the darkness it will be hard to read cuz its similar. ofc if you do a dark color for text you can use a much lighter shade of that color

Based on the given code snippet, if the user enters 1, 2, 0, 0, 1 as the input, the output will be:

size is : 2

size is : 3

size is : 3

size is : 3

size is : 4

This is because the input values are passed through a loop, and the values that are non-zero are added to the s list. The len(s) value is printed at each iteration of the loop, which represents the size of the list s.

For the given input, the non-zero values are 1 and 2, so the size of s is 2 after the first iteration. In the second iteration, the non-zero value is 1, so the size of s becomes 3. In the third, fourth, and fifth iterations, the non-zero values are 0, 0, and 1 respectively, so the size of s remains at 3, and then becomes 4.

Learn more about the size of s: https://brainly.com/question/29839182

#SPJ11

The order by clause that was used is "ORDER BY servicecost DESC". This is because the rows in a select result are in order by servicecost with the highest servicecost listed first.An ORDER BY clause is an SQL statement that allows the result set to be ordered.

An ORDER BY clause allows the rows of a SELECT statement's result set to be sorted in ascending or descending order. To sort the result set, the ORDER BY clause is used, and it is usually the last item in the SQL statement. The following are the guidelines for using ORDER BY:To sort the rows in ascending order, use the ASC keyword.To sort the rows in descending order, use the DESC keyword.If neither ASC nor DESC is specified, the order is ascending by default.To sort by more than one column, specify each column in the ORDER BY clause and separate them with commas.The following is an example:SELECT column_name FROM table_name ORDER BY column_name ASC/DESC;Thus, in the given problem, the order by clause that was used is "ORDER BY servicecost DESC". This is because the rows in a select result are in order by servicecost with the highest servicecost listed first.

learn more about  keyword  here:

https://brainly.com/question/16559884

#SPJ11

The statement that is true is that passing all test cases ensures a program is bug-free.A testbench is a module that generates stimuli for a Design Under Test.

(DUT) and evaluates the outputs from that DUT. It essentially verifies if the DUT satisfies the design specification, i.e., it checks if the DUT behaves as anticipated by the designer. This is accomplished by generating stimulus signals for the DUT and verifying that the response signals from the DUT match the desired outputs.This is usually accomplished by generating a series of test inputs for the design and evaluating the outputs to see whether or not they match the expected results. During this procedure, the testbench outputs the data to the console to provide feedback on what is happening.The statement that is true is that passing all test cases ensures a program is bug-free. Since it guarantees that the code meets the requirements and has been thoroughly tested for all use cases, this is a crucial measure for any software or coding projects. In addition, testing may identify problems before they become more costly and difficult to address.

Learn more about  testbench  here:

https://brainly.com/question/15052157

#SPJ11

Answer:

Analytical engine most often refers to a computing machine engineered by Charles Babbage in the early 1800s. 

The function that is not a part of a DBMS (Database Management System) is "provide links between different files that are used together."

A DBMS primarily focuses on allowing the storage, updating, and retrieval of data in the database, as well as coordinating multiuser database access.A DBMS, or database management system, is a software system that is used to allow the storage, updating, and retrieval of data in the database. It is also used to coordinate multi-user database access. However, providing links between different files that are used together is not a function of a DBMS.

Learn more about DBMS: https://brainly.com/question/19089364

#SPJ11

A data analyst can sort and filter the data to return the last five cars at the top by taking Filter out sales outside of Milwaukee, Filter out sales not in 2019 and Sort by date in descending order. So, options A, B and D are correct.

To return the last five car models sold in Milwaukee in 2019, the data analyst can use the following sorting and filtering techniques:

Here's a step-by-step approach for achieving this in SQL:

-- Step 1: Filter out sales outside of Milwaukee

SELECT *

FROM car_sales

WHERE location = 'Milwaukee';

-- Step 2: Filter out sales not in 2019

SELECT *

FROM car_sales

WHERE location = 'Milwaukee' AND YEAR(date) = 2019;

-- Step 3: Sort by date in descending order and limit to last five rows

SELECT *

FROM car_sales

WHERE location = 'Milwaukee' AND YEAR(date) = 2019

ORDER BY date DESC

LIMIT 5;

Learn more about data analyst here:

brainly.com/question/30132968

#SPJ11

The actual question is:

A data analyst reviews a database of Wisconsin car sales to find the last five car models sold in Milwaukee in 2019. How can they sort and filter the data to return the last five cars at the top? Select all that apply.

A) Filter out sales outside of Milwaukee

B) Filter out sales not in 2019

C) Sort by date in ascending order

D) Sort by date in descending order

The  thing that an administrator  should do to satisfy this requirement are:

To satisfy this requirement, an administrator can create an automated solution using Salesforce's Case Assignment Rules and sharing rules.

By following these steps, the administrator can create an automated solution that will ensure all new cases related to the new product are assigned to a specific queue and that the two lead engineers have read/write access to those cases. This will allow the engineers to stay up to date on all cases related to the new product and to collaborate effectively to resolve any issues that arise.

Learn more about administrator  here:https://brainly.com/question/30206212

#SPJ1

To undo the staging files and revert the working directory changes in a Git repository, follow these steps:

1. Unstage the file: Use the command `git reset HEAD project1.txt`. This will remove the file from the staging area.

2. Discard working directory changes: Use the command `git checkout -- project1.txt`. This will revert the changes made to the file in the working directory.

\When undoing staging files and undoing the working directory changes in Git, the command you should use is “git reset HEAD ” or “git reset --mixed HEAD ”. This answer explains in detail how to undo changes to the staging files and working directory files in Git.What is Git?Git is a free, open-source version control system that allows developers to keep track of their source code’s changes over time. Git is primarily used by software developers to manage their source code, but it can also be used for other types of files.What is staging in Git?Staging is a process in Git that involves adding files to the staging area so that Git can track and manage them. Once a file has been added to the staging area, it is ready to be committed to the repository.How to undo staging files and undo working directory changes in Git?To undo changes to the staging files and working directory files in Git, you can use the following commands:1. To undo changes to a single file in the staging area, use the following command: git reset HEAD Example: git reset HEAD file.txt2. To undo changes to all files in the staging area, use the following command: git resetExample: git reset3. To undo changes to a single file in the working directory, use the following command: git checkout -- Example: git checkout -- file.txt4. To undo changes to all files in the working directory, use the following command: git checkout -- .Example: git checkout -- .The “--mixed” option is used to undo changes to the staging area and working directory at the same time. For example, the following command will undo changes to a file in the staging area and working directory: git reset --mixed HEAD Example: git reset --mixed HEAD file.txtNote: This will not undo changes to files that have not been added to the staging area.

Learn more about Git version control system here: brainly.com/question/29642975

#SPJ11

Answer:

The code you provided is the beginning of a Java program that prompts the user to enter a string and then converts that string to both lowercase and uppercase using methods that are not yet defined. Here is the modified code with the missing methods implemented:

Explanation:

import java.util.Scanner;

public class ChangeCase {

   public static void main(String args[]) {

       Scanner s = new Scanner(System.in);

       String sample;

       String result;

       System.out.println("Enter a string or 'done' when you want to quit.");

       sample = s.nextLine();

       while(sample.compareTo("done") != 0) {

           // Call toLowerCase() method here and print the result.

           result = sample.toLowerCase();

           System.out.println("Lowercase: " + result);

           // Call toUpperCase() method here and print the result.

           result = sample.toUpperCase();

           System.out.println("Uppercase: " + result);

           System.out.println("Enter a string or 'done' when you want to quit.");

           sample = s.nextLine();

       }

       System.exit(0);

   }

}

The coloring of the graph in context (c) from the CMU Cloud Computing course likely provides a visual representation of the relationships between full edge vertices. The consistency in this graph coloring helps students understand the connections and structure within the graph more easily.

When answering questions on the platform Brainly, you should always be factually accurate, professional, and friendly. Additionally, you should be concise and avoid providing extraneous amounts of detail. You should not ignore any typos or irrelevant parts of the question as they may be important for understanding the context of the question and providing a complete answer. Finally, it is important to use the terms provided in the question to ensure that your answer is relevant and directly addresses the question being asked. For example, in response to the student question "what kind of consistency is provided by this coloring of the graph (c) cmu cloud computing course full edge vertex," your answer should directly address the type of consistency provided by the coloring of the graph in question (c) and should reference the terms "cmu cloud computing course," "full edge," and "vertex."

Learn more about cmu cloud computing here: brainly.com/question/31329644

#SPJ11

Answer: Yes

Explanation: because it uses less energy and creates less waste, 3D printers can reduce the cost of production as well.

(gimme a thanks if you dont mind)

An operating system uses available storage space on a startup drive for storing programs and virtual memory. Therefore, the correct options are a and b.

What is an operating system?An operating system is software that manages computer hardware and provides basic services for computer programs. An operating system (OS) serves as a link between applications and the hardware of a computer. Without an operating system, a computer is unable to operate. It is also responsible for memory management, security, and file and disk management.What is virtual memory?A computer can use virtual memory to simulate additional memory. The operating system allocates a part of the storage space on the hard drive to be utilized as an additional RAM memory. When the actual memory runs low, the operating system swaps the data from RAM to virtual memory, thus freeing up space. This technique is known as virtual memory, and it assists the computer in running larger applications or running many applications at once.

Learn more about operating system here:

https://brainly.com/question/31141315

#SPJ11

The southbound API that matches the description of being a Cisco proprietary API is OnePK.

In Cisco networking, there are several southbound APIs available. One of them is the Cisco proprietary API, which is specifically developed by Cisco for their networking devices. This API enables network administrators to interact with Cisco devices and control their behavior programmatically.

The Cisco proprietary API, also known as OnePK (One Platform Kit), provides a standardized interface for communication between the network controller and the network devices. It allows developers to access and manipulate various network functionalities, such as configuring network devices, retrieving network statistics, and managing network resources.

With the Cisco proprietary API, network administrators can automate network management tasks, streamline network operations, and integrate Cisco devices into their network infrastructure more efficiently.

Learn more about cisco networking here:

https://brainly.com/question/32538867

#SPJ14

Answer: I believe the answer would be A. List

Explanation: An array is a way to represent multiplication and division using rows and columns. Rows represent the number of groups. Columns represent the number in each group or the size of each group.

The 212 kb process will be placed in the 500 kb partition using the first-fit algorithm, while the 417 kb process will be placed in the 600 kb partition, the 112 kb process in the 200 kb partition, and the 426 kb process in the remaining 300 kb partition.

The first-fit algorithm places processes in the first available partition that is large enough to accommodate the process. Starting with the first partition, the 212 kb process would be placed in the 300 kb partition, leaving 88 kb of unused space. The 417 kb process would be placed in the 600 kb partition, leaving 183 kb of unused space. The 112 kb process would be placed in the 100 kb partition, leaving 12 kb of unused space. Finally, the 426 kb process would be placed in the 500 kb partition, leaving 74 kb of unused space. Therefore, the 212 kb process would be placed in the 300 kb partition using the first-fit algorithm.

learn more about the first-fit algorithm here:

https://brainly.com/question/29850197

#SPJ4

The combination of channels that a computer technician wants to purchase a cable modem capable of combining multiple channels to increase traffic flow from two 20 MHz channels to a single 40 MHz channel is called channel bonding.

Channel bonding refers to combining two or more independent channels to create a larger data pipe for increased data rates. When cable modems use this method, it's known as "channel bonding." Channel bonding is used to increase the efficiency of data transfer, particularly in high-bandwidth applications, by combining several channels into a single link.The following are the advantages of channel bonding:Increased bandwidth: Since two or more channels are combined into a single data path, channel bonding effectively doubles or triples the bandwidth rate. As a result, you may receive data more quickly and smoothly on your device.Smoother data transfer: Channel bonding also improves the data transfer experience because data flows more smoothly through the merged channels.Improved reliability: Channel bonding enhances signal quality and consistency, which can help to prevent buffering, lagging, and dropped connections during use.

Learn more about channels here:

https://brainly.com/question/30369845

#SPJ11

When the user highlights the red circled cell in the body of the pivot table and then the blue circled cell in the totals row of the pivot table, the user will see the same formula in the Function Bar.Pivot Tables are Excel tools that enable you to summarize and analyze spreadsheet data, extracting the significance from it.

Pivot Tables are used to create summaries, analyses, and comparisons of spreadsheet data in a useful format. Pivot Tables are an excellent feature for working with large amounts of data.The Function BarA function bar is a toolbar that appears above the cells in an Excel spreadsheet. The function bar is an area that shows the results of the calculation when a cell is selected. The formula bar and the Function Bar are two distinct components of Excel's user interface.In conclusion, when the user highlights the red circled cell in the body of the pivot table and then the blue circled cell in the totals row of the pivot table, the user will see the same formula in the Function Bar.

Learn more about pivot table   here:

https://brainly.com/question/30543245

#SPJ11

The Hex Editor shows the ASCII contents of the file1 between the vertical bars or pipes. A hex editor, also known as a binary file editor or byte editor, is a type of computer program that allows for manipulation of binary data.

It is mainly used by computer professionals, hackers, and software developers to inspect, search, and modify binary files such as executables, libraries, system files, game files, and other types of data files.

Hexadecimal numbers are used in hex editors, where each byte is represented as two hexadecimal digits (0–9 and A–F). ASCII, or the American Standard Code for Information Interchange, is a character encoding standard used for electronic communication. Each character is represented by a unique 7-bit binary code.

Ascii contents of file1 represented between vertical bars or pipes are shown below:|H|e|l|l|o| |W|o|r|l|d|!|In this example, each character of the ASCII text is represented by its corresponding hexadecimal code.
Learn more about here hex editor

https://brainly.com/question/23083787

#SPJ11