Discuss the advantages and disadvantages of transferring or
promoting employees from within an organization versus hiring
externally. What factors affect this business decision of workforce
management

Answers

Answer 1

The recruitment and retention of employees in an organization is the most critical aspect of human resource management. As a result, deciding whether to promote or transfer current employees or recruit new ones externally is a challenging decision that must consider various factors.

The first division may suffer if the employee was in a critical position that was hard to fill. Additionally, promoting employees from within can limit the diversity of the workforce and decrease creativity, leading to stagnant ideas. Advantages of hiring externally An organization can receive a wealth of fresh ideas and perspectives from new hires, which can help improve the overall efficiency of the company.

Hiring externally ensures that the company can get the best possible candidate for the job. By expanding the recruitment process to a larger pool of candidates, the company can find employees with better skills and knowledge. Hiring externally also provides the opportunity to increase diversity and introduce new ideas to the company. It may be necessary for a company to hire externally to fill a role quickly, which will save time and resources on training.Disadvantages of hiring externallyOne of the drawbacks of hiring externally is the potential negative effect on employee morale. Internal candidates may feel overlooked and underappreciated when new employees are brought in externally.

External employees may have difficulty fitting in with the culture of the company, causing conflict within the workplace. There is also the possibility that an external candidate will not be the right fit for the position, which will result in a waste of time and resources.

To know more about candidates visit:

https://brainly.com/question/29318744

#SPJ11


Related Questions

Suppose the going rate (i.e., the price) for a room at Hotel Madison is $50 per night. At that price, the hotel has an average of 40 occupants per night. After raising the rate to $150, this average decreases to 10 occupants. What is the elasticity of demand for hotel rooms at these rates? If necessary, round your answer to the nearest tenth and include leading zeros in a decimal. (That is, if you find an answer of 0.932, type "0.9").

Answers

Elasticity of demand refers to the degree of the responsiveness of the demand to the variations in the prices. It is calculated as follows:

elasticity of demand = (% change in quantity demanded)/(% change in price).

Firstly, we need to find out the percentage change in the price of the hotel rooms.

That is,percentage change in [tex]price = [(new price - old price)/old price] × 100percentage change in price = [(150 - 50)/50] × 100percentage change in price = 200%[/tex].

Now, we need to calculate the percentage change in the quantity demanded of the hotel rooms. That is,percentage change in quantity demanded = [(new quantity demanded - old quantity demanded)/old quantity demanded] × 100percentage change in quantity demanded = [ (10 - 40)/40] × 100percentage change in quantity demanded = -75%Therefore,elasticity of demand = (% change in quantity demanded)/(% change in price)elasticity of demand = (-75%)/(200%)elasticity of demand = -0.375.

To know more about percentage visit:

https://brainly.com/question/32197511

#SPJ11

The firm WebsAreUs creates and maintains Web sates for client companies. There are two types of Web sites: "Hot" sites change their layout frequently but keep their content for long times; "cool" sites keep their layout for a while but frequently change their content. To maintain a hot site requires 1.5hr of layout time and 1hr for content changes. To maintain a cool site requires 1hr of layout time and 2hr for content changes. Every day, WebsAreUs has available 12hr for layout changes and 16hr for content changes. Net profit is $50 for a set of changes on a hot site and $250 for a set of changes on a cool site. \$h order to maximize profit, how many, of each type of site should WebsareUs maintain daily Sho'w all five steps What is the thdximum orofrt?

Answers

WebsAreUs should maintain 8 Cool sites daily to maximize their profit, resulting in a maximum profit of $2,000.

WebsAreUs is a company that specializes in creating and maintaining websites for client companies. They offer two types of websites: "Hot" sites, which frequently change their layout but keep their content stable, and "Cool" sites, which maintain their layout for a while but frequently update their content.

To maximize their profit, WebsAreUs needs to determine the optimal number of sites of each type to maintain daily. Let's break down the steps to find the solution:

Step 1: Define the variables:

Let 'x' represent the number of Hot sites.

Let 'y' represent the number of Cool sites.

Step 2: Write the objective function:

The objective is to maximize the profit.

Z = 50x + 250y

Step 3: Write the constraint equations:

WebsAreUs has 12 hours available for layout changes, with each Hot site requiring 1.5 hours and each Cool site requiring 1 hour.

1.5x + y ≤ 12

WebsAreUs has 16 hours available for content changes, with each Hot site requiring 1 hour and each Cool site requiring 2 hours.

x + 2y ≤ 16

The number of sites cannot be negative.

x ≥ 0, y ≥ 0

Step 4: Draw the graph for the constraint equations.

Step 5: Test the solution points:

Test (0, 0):

Z = 50(0) + 250(0) = $0

Test (0, 8):

Z = 50(0) + 250(8) = $2,000

Test (4, 0):

Z = 50(4) + 250(0) = $200

Test (6, 2):

Z = 50(6) + 250(2) = $1,200

The maximum profit WebsAreUs can achieve is $2,000, which can be obtained by maintaining 8 Cool sites daily.

Learn more about profit

https://brainly.com/question/32864864

#SPJ11

Should political party organisations conduct marketing research? Support your answer with relevant examples. (25 marks)
Please this is a research question on marketing research not campaign advertisement.

Answers

As you know the political party organizations prefer to conduct marketing research for various reasons that are beneficial for them. The political parties must conduct marketing research to gather information about their target audience and understand the needs and preferences of voters.

Marketing research helps to identify the issues that are most important to voters and the ways in which they want their elected representatives to address them. Political parties can then use this information to develop more effective campaigns and policy platforms that resonate with their constituents.

Examples of marketing research that political parties can conduct include surveys, focus groups, and data analysis of voting patterns and demographic trends. Surveys can be conducted to gather information about voters' opinions on specific issues or to assess their level of satisfaction with current policies and programs. Focus groups can provide more in-depth information about voters' attitudes and perceptions, as well as their motivations for supporting or opposing specific candidates or parties.

Data analysis can be used to identify trends in voting behavior, such as the factors that are most likely to influence voters' decisions or the demographics that are most likely to support a particular party or candidate. Overall, marketing research is a critical tool for political parties to stay informed about their constituents and to develop effective campaigns and policies that address their needs and preferences.

To know more about political party organizations please check the following link

https://brainly.com/question/29745583

#SPJ11

You are the new manager of Accounts Payable. As a proud UM graduate, you have worked hard and reduced the AP balance below by 8.9%. What is the new CashCT value (in days) given the following data:
Days in the period: 52
Sales: $11,667,582
AR: $3,776,139
AP: $4,649,284
Inventory: $7,616,713
Cost of Sales: 60
(Keep two decimal places in your answer)

Answers

Cash Conversion Cycle (CCC) is the length of time between a company's cash outflows and inflows. Cash Conversion Cycle is a crucial metric for assessing the operational efficiency of a company's management.

Companies may optimize their CCC to enhance their working capital management and financial stability.A company can reduce its CCC by increasing the amount of time it takes to pay its bills (Accounts Payable) or by decreasing the amount of time it takes to collect funds (Accounts Receivable). The formula is CCC = DIO + DSO - DPO.The calculation for the new Cash Conversion Cycle is as follows:Average accounts payable = AP/COGS × 365Average accounts payable = $4,649,284/($11,667,582 × 60%) × 365.

Average accounts payable = $1,074,112CCC = DIO + DSO - DPODIO = Inventory ÷ COGS × 365DIO = $7,616,713 ÷ ($11,667,582 × 60%) × 365DIO = 127.89 daysDSO = AR ÷ Sales × 365DSO = $3,776,139 ÷ $11,667,582 × 365DSO = 118.88 daysDPO = AP ÷ COGS × 365DPO = $4,649,284 ÷ ($11,667,582 × 60%) × 365DPO = 132.36 daysCCC = DIO + DSO - DPOCCC = 127.89 + 118.88 - 132.36CCC = 114.41 daysThe new Cash Conversion Cycle (CCC) is 114.41 days. This represents the amount of time it takes to transform inventory and sales into cash inflows while paying accounts payable.

To know more about efficiency visit:

https://brainly.com/question/30861596

#SPJ11

Identify Walter Reed National Military Medical Center core competencies and assess which ones are rare, costly, or not easily imitated. 2.Present a summary of your organization's strengths and potential (or currently verifiable) competitive capabilities. Also summarize the organization's weaknesses. Identify your company’s core competencies and assess which ones are rare, costly, or not easily imitated. 2.Present a summary of your organization's strengths and potential (or currently verifiable) competitive capabilities. Also summarize the organization's weaknesses. 3.Apply the Resource-Based View (RBV) to help you identify both the tangible and intangible assets your organization may be able to use to accomplish its intended strategies. 4.Consider and discuss the things that may make your organization's resources and capabilities difficult for others to imitate. Use Value Chain Analysis to help you deepen your understanding of the relative value of the resources and capabilities you have identified. Seek objective and independently verifiable evidence of potential rarity of the resources and capabilities.

Answers

For Part 1: Walter Reed National Military Medical Center's core competencies include the following: Active engagement in quality care services.

2. Walter Reed National Military Medical Center is one of the only hospitals in the United States that specializes in trauma care and research, which is a rare and valuable competency. Additionally, the center has a large number of highly trained and experienced medical staff, which is a costly competency.

3. Competitive capabilities: A focus on patient-centered care, continuous improvement, medical advancements through research and development, advanced surgical procedures, treatment, and diagnostic capabilities. Weaknesses: Insufficient funding, limited public awareness, and a lack of strategic partnerships.

4. Resource-Based View (RBV) approach: The organization's tangible and intangible assets, such as skilled staff, training and learning programs, culture, and research capabilities, are all resources that may be used to achieve strategic objectives. Additionally, the hospital's location, physical infrastructure, and advanced medical technologies are all tangible resources that may provide it with a competitive advantage.

To know more about Walter Reed visit: brainly.com/question/20333728

#SPJ11

Your hair is very busy today and your team is having trouble keeping up you notice several co-workers on their cell phones and not doing their share what would you most and least likely to do

Answers

In a situation where my hair is busy and my team is having trouble keeping up, and I notice several co-workers on their cell phones and not doing their share, there are several actions I would be most and least likely to take:

Most likely:

1. Address the issue directly: I would approach the co-workers individually or as a group and express my concern about their lack of productivity and engagement. I would inquire about any challenges they might be facing and offer assistance if needed. This direct communication can help clarify expectations and encourage accountability.

2. Delegate tasks: I would identify specific tasks that need immediate attention and assign them to the co-workers who are not currently occupied. By clearly delegating responsibilities, I can help redirect their focus and ensure that work is being accomplished effectively.

3. Offer support and guidance: If the co-workers are struggling with their tasks, I would provide guidance and support to help them overcome any obstacles. This could involve offering advice, sharing resources, or providing additional training if necessary. By showing empathy and offering assistance, I can foster a sense of teamwork and motivate them to contribute to the team's success.

Least likely:

1. Ignore the situation: Ignoring the issue may lead to further productivity issues and resentment among team members. It is important to address problems promptly to maintain a positive work environment and ensure that the team's goals are being met.

2. Confrontation or reprimanding: While it may be tempting to confront the co-workers in a confrontational or reprimanding manner, this approach can create a hostile atmosphere and damage relationships. It is more effective to approach the situation with empathy and seek understanding before jumping to conclusions or assigning blame.

3. Taking over all the work: While it may be tempting to take over all the tasks to ensure they are completed on time, this approach can create dependency and enable the co-workers to continue their unproductive behavior. It is important to empower and encourage them to take responsibility for their assigned tasks while providing necessary support.

for more questions on cell phones

https://brainly.com/question/23433108

#SPJ8

Washington Corp had 45,000 shares of common stock outstanding from January 1 to April 1 and 65,000 shares from April 1 to December 31.
What is the weighted-average number of shares used for earnings per share calculations?

Answers

In financial accounting, earnings per share (EPS) are the monetary value of earnings of a company per each outstanding share of its common stock.

To calculate EPS, the average number of shares of stock outstanding throughout the period should be determined.
We are given that the corporation had 45,000 shares outstanding from January 1 to April 1 (91 days), and 65,000 shares from April 1 to December 31 (274 days).


Weighted-average number of shares
= [(45,000 shares × 91 days) + (65,000 shares × 274 days)] ÷ 365
= (4,095,000 + 17,810,000) ÷ 365
= 21,905,000 ÷ 365
= 60,013.70 (rounded to the nearest whole number)
Therefore, the weighted-average number of shares used for earnings per share calculations is 60,014 shares.

To know more about monetary visit:

https://brainly.com/question/28199887

#SPJ11

Assume (t) estimated fixed manufacturing overhead for the coming period of $221,000,(2) estimated vatiable manufacturing overhead of $2.00 per direct labor hour, (3) actual manufacturing overhead for the period of $320,000, (4) actual direct faboc-hours worked of 54,000 hours, and (5) estimated drect labor hours to be worked in the coming penod of 55,000 hours. The amount of overhead applied to production during the period is closest to: (Round your intermediate value of "Predetermined overhead rate" to two decimal places) Maliple Chaice 5337124= $325,080. $331,000, 5321,926

Answers

Given Information:

Estimated fixed manufacturing overhead (t) = $221,000

Estimated variable manufacturing overhead per direct labor hour (2) = $2.00

Actual manufacturing overhead (3) = $320,000

Actual direct labor-hours worked (4) = 54,000

Estimated direct labor hours to be worked in the coming period (5) = 55,000

We are supposed to find the amount of overhead applied to production during the period using the following formula:

Overhead Applied = Actual direct labor hours worked × Predetermined overhead rate

Where,

Predetermined overhead rate = Estimated total manufacturing overhead ÷ Estimated total direct labor hours First, we will calculate the estimated total manufacturing overhead.

Estimated total manufacturing overhead = Estimated fixed manufacturing overhead + Estimated variable manufacturing overhead= $221,000 + ($2.00 × 55,000)= $221,000 + $110,000= $331,000

Now, we will calculate the predetermined overhead rate.

Predetermined overhead rate = Estimated total manufacturing overhead ÷ Estimated total direct labor hours= $331,000 ÷ 55,000= $6.02 per direct labor-hour (rounded off to two decimal places)

Using the above value, we can calculate the amount of overhead applied to production during the period.

Overhead Applied = Actual direct labor-hours worked × Predetermined overhead rate= 54,000 × $6.02= $325,080

Therefore, the amount of overhead applied to production during the period is closest to $325,080.

Hence, option (A) is correct.

To know more about manufacturing visit :

https://brainly.com/question/29489393

#SPJ11

2 For a 1-year European call option on a stock whose prices are modeled with a binomial tree: (i) The tree has 2 periods. (ii) The tree is constructed based on forward prices. (iii) The stock price is 42 . (iv) The strike price is 35 . (v) The continuously compounded risk-free interest rate is 0.05. (vi) The stock pays no dividends. (vii) σ=0.1. Determine the option's premium.

Answers

To determine the premium of the European call option, we can use the binomial tree model. The premium of the European call option is 3.864.


In this case, the tree has 2 periods, meaning there are 3 possible stock prices at the end of the second period:

1. Up-Up: The stock price increases by a factor of (1 + σ) twice.
2. Up-Down/Down-Up: The stock price increases by a factor of (1 + σ) once and decreases by a factor of (1 - σ) once.
3. Down-Down: The stock price decreases by a factor of (1 - σ) twice.


Given that the stock price is currently 42, we can calculate the potential stock prices at the end of the second period using the binomial tree model.

1. Up-Up: (42) * (1 + σ) * (1 + σ) = 46.86
2. Up-Down/Down-Up: (42) * (1 + σ) * (1 - σ) = 39.06
3. Down-Down: (42) * (1 - σ) * (1 - σ) = 34.84


Next, we calculate the payoffs for each possible stock price at the end of the second period. The payoff for a call option is the maximum of 0 and the difference between the stock price and the strike price.

1. Up-Up: max(0, 46.86 - 35) = 11.86
2. Up-Down/Down-Up: max(0, 39.06 - 35) = 4.06
3. Down-Down: max(0, 34.84 - 35) = 0


Now, we calculate the option values at each node of the tree, starting from the end and moving backward. We discount the payoffs using the risk-free interest rate and the time period.

1. Up-Up: (0.5) * (11.86 * e^(-0.05 * 1)) = 5.755
2. Up-Down/Down-Up: (0.5) * (4.06 * e^(-0.05 * 1)) = 1.973
3. Down-Down: (0.5) * (0 * e^(-0.05 * 1)) = 0



Finally, we calculate the option value at the initial node of the tree, which represents the option's premium:

Option premium = (0.5) * [(5.755 + 1.973) * e^(-0.05 * 1)] = 3.864

Therefore, the premium of the European call option is 3.864.

To know more about binomial tree refer here:

https://brainly.com/question/29612326#

#SPJ11

What is it means these words?
"Operations management is concerned with any productive activity, whether manufacturing or service, public sector or private sector, profit making or not for profit. It is concerned with ensuring that operations are carried out both efficiently and effectively".
Question 2 What are the roles of manufacturing and services in the economy?
Question3 What are these mean? "The key environmental variables for operations managers are volume, variation, variety, and customer contact".

Answers

1. Operations management is concerned with ensuring efficient and effective productive activities in various sectors.

2. Manufacturing and services are both essential components of the economy, creating goods and providing intangible products, respectively.

3. The key environmental variables for operations managers are volume, variation, variety, and customer contact, influencing production and delivery decisions.

1. Operations management is concerned with any productive activity, whether manufacturing or service, public sector or private sector, profit making or not for profit. It is concerned with ensuring that operations are carried out both efficiently and effectively.

Operations management involves planning, organizing, coordinating, directing, and controlling resources like people, materials, and energy to achieve the desired objectives and goals of an organization. Operations management is the backbone of any organization, and it is responsible for the creation and delivery of products and services. The primary aim of operations management is to increase productivity, reduce costs, and ensure customer satisfaction.

2. Manufacturing and services are critical components of any economy. Manufacturing is concerned with the creation of physical goods, while services are concerned with the creation of intangible products. Both manufacturing and services play an important role in the economy. Manufacturing is responsible for producing goods that consumers need and want, while services are responsible for providing services that are essential to everyday life. Manufacturing and services create jobs, generate revenue, and contribute to the economic growth of a country.

3. The key environmental variables for operations managers are volume, variation, variety, and customer contact. Volume refers to the quantity of goods or services that are produced or delivered. Variation refers to the degree of variation or complexity in the production or delivery process. Variety refers to the range of products or services that are produced or delivered. Customer contact refers to the degree to which customers interact with the production or delivery process. Operations managers must consider these environmental variables when making decisions about production and delivery processes. By understanding these variables, they can design processes that are efficient, effective, and customer-focused.

Learn more about Operations management

https://brainly.com/question/30415374

#SPJ11

A mining company, with a stable growth of 1%, has net income of $50 million and the market value of its equity is $250 million. The company decides to increase its dividend payout ratio by 2%. What will most likely happen to the company's price-to-earnings (P/E) ratio? The P/E ratio will decrease 4 O The P/E ratio will increase O The P/E ratio will remain unchanged

Answers

The P/E ratio will most likely decrease.The P/E ratio is calculated by dividing the current market price per share by the earnings per share (EPS) of a company.

In general, the P/E ratio indicates how much investors are willing to pay per dollar of earnings. The P/E ratio is a critical metric since it indicates whether a company is overvalued or undervalued.The company has a stable growth of 1 percent, net income of $50 million, and the market value of its equity is $250 million.

They intend to increase the dividend payout ratio by 2%.To compute the P/E ratio, we must first determine the earnings per share (EPS) of the company, which is the net income divided by the total number of outstanding shares:EPS = Net income / No of outstanding shares

EPS = $50,000,000 / No of outstanding shares

The dividend payout ratio is determined by dividing the dividends per share (DPS) by the EPS:Dividend payout ratio = Dividends per share / Earnings per share.Dividend payout ratio = Dividends per share / (Net income / No of outstanding shares)Dividend payout ratio = (2/100) / ($50,000,000 / No of outstanding shares)

Dividend payout ratio = 2No of outstanding shares = (2/100) * $50,000,000 / DPS. When we multiply the number of shares outstanding by the dividend per share (DPS), we get the total dividend paid by the company:Total dividend = No of outstanding shares * Dividend per shareTotal dividend = (2/100) * $50,000,000P/E ratio = Market value per share / Earnings per shareP/E ratio = Market value of equity / Earnings per shareP/E ratio = $250,000,000 / $0.02P/E ratio = 12,500,000Since the net income and the number of shares outstanding have remained unchanged, increasing the dividend payout ratio will reduce the earnings per share (EPS). This will result in a higher P/E ratio. Therefore, the P/E ratio will most likely decrease if the company increases its dividend payout ratio by 2%.

To know more about P/E Ratio please check the following link

#SPJ11

Based on you review of the Ethics & Governance section, describe how Kimberly-Clark addresses ethical behavior by addressing the following: a. Review the corporate policy bulleted titles under the "Commitment to Our Values" section on the Ethics \& Governance page and select one topic that you believe is most important for promoting ethical behavior. If you were employed with Kimberly-Clark, would the corporate policy that you selected help you to act in an ethical manner? Finally, give one suggestion that should be included to strengthen the company's ethical behavior focus. b. Download and review the Code of Conduct, describe its purpose and the responsibility of the employees to follow the code. Next, review the table of contents, select one Code policy that you believe is the most important, and summarize its purpose. If you were employed with Kimberly-Clark, would the Code policy that you selected help you to act in an ethical manner? Finally, give one suggestion for the selected code policy that should be included to strengthen the company's ethical behavior focus.

Answers

Kimberly-Clark addresses ethical behavior through its various corporate policies, which include the Corporate Policies, Human Rights, Health, Safety, and Environmental Policy, and Code of Conduct. These policies demonstrate the company's commitment to upholding ethical standards.

To further support ethical behavior, Kimberly-Clark provides a helpline and an Office of Business Conduct to assist employees with any ethical questions or concerns they may have. The company also publishes a comprehensive Ethics and Governance report, which showcases its performance in promoting ethical conduct and being a responsible corporate citizen.

One particularly significant aspect for fostering ethical behavior is the Kimberly-Clark Corporate Policies. These policies establish a clear ethical standard that all employees are expected to adhere to. If I were an employee at Kimberly-Clark, the Corporate Policy would guide me in acting ethically as it sets forth the expected behavior enforced by the company. Strengthening the company's focus on ethical conduct could involve providing more comprehensive training on the Corporate Policy.

The Code of Conduct serves the purpose of establishing ethical guidelines for employees and offering guidance on ethical decision-making. It is the responsibility of employees to abide by the Code of Conduct, which sets a standard enforced by the company.

Among the code policies, the Gifts and Entertainment Policy holds particular importance. This policy sets guidelines to prevent the creation of an appearance of impropriety or conflicts of interest in relation to gifts and entertainment. If I were an employee at Kimberly-Clark, the Gifts and Entertainment Policy would guide me in acting ethically by providing clear expectations and enforcement by the company. To enhance its focus on ethical behavior, the company could consider providing a more detailed description of what constitutes an appearance of impropriety or conflict of interest within the Gifts and Entertainment Policy.

Know more about Kimberly-Clark:

brainly.com/question/14249222
#SPJ11

The Law of Demand states the relationship between the demand for a good and that good's price. Which of the following statements summarize this relationship? Choose one or more: A. Demand curves for normal goods are always upward sloping. B. Demand curves for Giffen goods are always downward sloping. C. Demand curves for Giffen goods are always upward sloping. D. Demand curves are upward sloping in all cases. E. Demand curves for inferior goods are always downward sloping. F. Demand curves for Giffen goods could be upward sloping or downward sloping. G. Demand curves for normal goods are always downward sloping. H. Demand curves are downward sloping in all cases. I. Demand curves for normal goods could be upward sloping or downward sloping. J. Demand curves for inferior goods could be upward sloping or downward sloping.

Answers

The Law of Demand states that there is an inverse relationship between the price of a good and the quantity demanded. Based on this, the correct statement(s) summarizing this relationship are:

D. Demand curves are upward sloping in all cases.
F. Demand curves for Giffen goods could be upward sloping or downward sloping.
I. Demand curves for normal goods could be upward sloping or downward sloping.
J. Demand curves for inferior goods could be upward sloping or downward sloping.

These statements reflect the different possibilities for the slope of demand curves depending on the type of goods.

#SPJ11

Learn more about Law of Demand at https://brainly.com/question/30703626

Use a model of a two-factor economy and graphically demonstrate the pre-trade and post trade equilibria between these two countries. Which factors gain and which factors lose when trade arises between the two countries? Explain carefully Australia is land abundant and India is labor abundant. Wheat is land intensive relative to textiles. Use a model of a two-factor economy and graphically demonstrate the pre-trade and post-trade equilibria between these two countries. Which factors gain and which factors lose when trade arises between these two countries? Explain carefully.

Answers

To demonstrate the pre-trade and post-trade equilibria between Australia and India in a two-factor economy, we need to consider their relative factor endowments and the relative intensity of production for wheat and textiles. Australia is land abundant, while India is labor abundant. Wheat production is land-intensive relative to textiles.

Pre-trade equilibria: 1. In Australia, due to its abundant land, the production of wheat is relatively more efficient compared to textiles. This means that the production possibilities frontier (PPF) for Australia is steeper for wheat than textiles. 2. In India, with its abundant labor, the production of textiles is relatively more efficient compared to wheat. This means that the PPF for India is steeper for textiles than wheat. Post-trade equilibria: 1. Australia specializes in the production of wheat, while India specializes in the production of textiles. 2. As a result, Australia's PPF for wheat shifts outward, reflecting increased production efficiency due to specialization. 3. India's PPF for textiles also shifts outward, reflecting increased production efficiency due to specialization. 4. Both countries can now consume a combination of goods that lies outside their individual PPFs. Factors that gain from trade: 1. Australia gains from trade as it can now consume more textiles than before without sacrificing wheat production. 2. India gains from trade as it can now consume more wheat than before without sacrificing textile production. Factors that lose from trade: 1. In the case of Australia, the labor factor loses as the country specializes in wheat production, which is less labor-intensive compared to textiles. 2. In the case of India, the land factor loses as the country specializes in textile production, which is less land-intensive compared to wheat. In summary, when trade arises between Australia and India, both countries can benefit from specialization and increased production efficiency. Australia gains in terms of textile consumption and India gains in terms of wheat consumption. However, the factors that lose are labor in Australia and land in India due to the specialization of production.

Learn more about the  Specialization :

https://brainly.com/question/24448534

#SPJ11

A bookkeeper incorrectly journalized $16,400 in cash collected on a customer account as a debit to accounts receivable for $16,400 and a credit to cash for $16,400. What is the impact of this error on the trial balance, the cash account, and the accounts receivable account? (Hint: draw the relevant T-accounts!) Select one: O a. The credit side of the trial balance would be $32,800 higher than the debit side of the trial balance, cash would be correctly stated, and accounts receivable would be correctly stated. O b. The debit side of the trial balance would be $32,800 higher than the credit side of the trial balance, cash would be correctly stated, and accounts receivable would be correctly stated. O c. The trial balance would be in balance, cash would be overstated by $32,800, and accounts receivable would be understated by $32,800. Od. The trial balance would be in balance, cash would be understated by $32,800, and accounts receivable would be overstated by $32,800.

Answers

The trial balance would be in balance, cash would be understated by $32,800, and accounts receivable would be overstated by $32,800. The correct option is d.

The accounting equation states that

assets = liabilities + equity.

In addition, it states that the sum of all debits must be equal to the sum of all credits for all accounts in a trial balance, and that every transaction has two effects, a debit effect and a credit effect.

In the given situation, the bookkeeper made a mistake of debiting accounts receivable for $16,400 and crediting cash for the same amount.

The accounts receivable account should have been credited for $16,400, which means it is overstated by

$32,800 ($16,400 incorrect debit entry + $16,400 credit entry that should have been made).

Furthermore, cash should have been debited for $16,400, but it was only credited for that amount, which means it is understated by

$32,800 ($16,400 incorrect credit entry + $16,400 debit entry that should have been made).

Since the trial balance will not be impacted by a transaction with equal debits and credits, the trial balance will be unaffected. Thus, option (d) is the correct choice.

Know more about the trial balance

https://brainly.com/question/4925044

#SPJ11

sparring over which had greater power, better fuel efficiency, more durability, or a smoother ride. Now, they are sending the combustion engine to the scrap heap and are pouring billions of dollars into electric motors and battery factories. Instead of powertrain specialists, they are hiring thousands of software engineers and battery experts. The transition is upending the automotive workplace, from the engineering ranks and supply chain to the factory floor. Parts makers that for generations have made the same pieces for engines and transmissions are jockeying to supply electrical components. Unions in the U.S. and Europe fear a steep loss of jobs tied to making engines and transmissions. The UAW has warned that the move to EVs, which require fewer parts and 30% less manpower to produce, could jeopardize tens of thousands of U.S. jobs. A Morgan Stanley report estimates full transition to EVs could lead to 3 million lost automotive jobs globally. EVs are simpler mechanically than gas-powered ones. Their drivetrains employ fewer than 20 moving parts, compared to hundreds for the gas-powered version. "It's been a fun ride," said an engineer with 40 years in the industry. "But I think we're coming into the homestretch for the conventional engine." Auto executives have concluded that they can't meet tougher tailpipe-emissions rules globally by continuing to improve gas or diesel engines. And they don't intend to develop any new gas engines. "I don't know where to spend money on them anymore," said GM's President. Developing a new gas engine can cost $1 billion and involves hundreds of suppliers. Over the past several decades, auto makers rolled out 20−70 new engines annually. That number will fall below 10 this year, and then essentially go to zero. The industry's rapid shift in focus has left suppliers that have long made parts for gas engines hustling to reinvent themselves. "We don't want to be left making the best buggy whips," said one Michigan auto supplier. Source: The Wall Street Journal (July 24-25, 2021). Critical Thinking Questions 1. The transition to electric vehicles A. is inevitable. B. is dependent on auto union cooperation. C. could mean the loss of 10 million U.S. jobs. D. has taken place already. E. can be stopped if more efficient gas engines are developed soon. 2. Auto parts makers A. will all go out of business. B. are pleased that this transition is taking place quickly. C. prefer a move to more diesel engine autos. D. have more invested in batteries than gas engine components. E. need to develop new strategies.

Answers

The correct option is A. The transition to electric vehicles is inevitable.

The correct option is E. Auto parts makers need to develop new strategies. Auto executives have concluded that they can't meet tougher tailpipe-emissions rules globally by continuing to improve gas or diesel engines. They also do not intend to develop any new gas engines. Thus, the transition to electric vehicles is inevitable.

Auto parts makers need to develop new strategies as the industry's rapid shift in focus has left suppliers that have long made parts for gas engines hustling to reinvent themselves. Parts makers that for generations have made the same pieces for engines and transmissions are jockeying to supply electrical components.

To learn more about electric vehicles, visit:

https://brainly.com/question/30714733

#SPJ11

The space shuttle Columbia broke up during re-entry on February 1, 2003, over Tyler, TX. All on board were lost. The cause was traced to the shedding of a large piece of foam from the external tank, which struck the leading edge of the wing at launch. Two NASA engineers identified the strike on the launch video, and were concerned enough to request that the shuttle be imaged in orbit by the TRW telescope to assess the damage. Their request was denied by a middle-level manager at NASA for the stated reason that they had made the request "...through the wrong channel." This response to the engineers suggests what kind of culture existed in that part of NASA at that time (according to Westrum's typology of organizational cultures)? Bureaucratic Pathological Generative Analytical

Answers

According to Westrum's typology of organizational cultures, the response to the engineers that their request was denied by a middle-level manager at NASA for the stated reason that they had made the request through the wrong channel suggests a Bureaucratic culture in that part of NASA at that time.

In the Bureaucratic culture, a strict adherence to the rules and procedures is implemented. The focus is on making sure that everyone follows the rules and any violation of these rules is dealt with immediately.

The decision to deny the engineers' request through a bureaucratic channel rather than viewing the potential damage to the space shuttle in a timely manner was more important to the middle-level manager at NASA.

Hence, the decision made by the manager was a reflection of the bureaucratic culture that existed in that part of NASA at that time.

The Bureaucratic culture focuses on ensuring that all procedures and policies are followed strictly, with little or no room for deviation.

This kind of culture is common in organizations such as government agencies, universities, and other large organizations where a lot of bureaucracy is required to manage the large number of employees and tasks.

To know more about organizational visit :

https://brainly.com/question/23967568

#SPJ11

Pfd Company has debt with a yield to maturity of 7.0%​,
a cost of equity of 13.0%​, and a cost of preferred stock of
9.0%. The market values of its​ debt, preferred​ stock, and equity are $10.0 ​million, $3.0 ​million, and $15.0 million, respectively, and its tax rate is 40%.
What is this​ firm's after-tax​ WACC?
​Note: Assume that the firm will always be able to utilize its full interest tax shield.

Answers

Pfd Company's after-tax WACC is calculated to be 6.07% based on the given information. The after-tax WACC considers the weights and after-tax costs of debt, preferred stock, and equity.

To calculate the after-tax WACC (Weighted Average Cost of Capital) for Pfd Company, we need to consider the weights of each component and their respective after-tax costs.

The after-tax cost of debt can be calculated by multiplying the yield to maturity (7.0%) by (1 - tax rate), resulting in an after-tax cost of debt of 4.2%.

Next, we calculate the weights of each component by dividing their market values by the total market value of the firm:

Debt weight: $10.0 million / ($10.0 million + $3.0 million + $15.0 million) = 0.3333

Preferred stock weight: $3.0 million / ($10.0 million + $3.0 million + $15.0 million) = 0.1000

Equity weight: $15.0 million / ($10.0 million + $3.0 million + $15.0 million) = 0.5000

Finally, we can calculate the after-tax WACC by multiplying each component's weight by its respective after-tax cost and summing them up:

After-tax WACC = (0.3333 * 4.2%) + (0.1000 * 9.0%) + (0.5000 * 13.0%) = 6.07%

Therefore, Pfd Company's after-tax WACC is 6.07%.

Learn more about Weighted Average Cost of Capital here:-

https://brainly.com/question/28042295

#SPJ11

Ethanol subsidies in the United States increased the demand for corn (corn is the primary resource used for ethanol production in the United States). The net result has been more corn sold at higher prices. This is an example of the:
a. supply curve shifting to the right.
b. demand and supply curves shifting to the right but demand shifting farther than supply.
c. demand curve shifting to the right.
e. demand and supply curves shifting to the right but supply shifting farther than demand.

Answers

The correct answer is c. demand curve shifting to the right.

The statement mentions that ethanol subsidies in the United States increased the demand for corn, resulting in more corn sold at higher prices. This scenario aligns with a shift in the demand curve for corn.

When the government introduces subsidies for ethanol production, it effectively increases the purchasing power of consumers who use ethanol or ethanol-blended fuels.

As a result, the demand for corn, the primary resource used for ethanol production, increases. The increased demand for corn leads to a higher quantity of corn demanded at each price level, causing the demand curve to shift to the right.

A rightward shift of the demand curve signifies an increase in demand, which results in a higher equilibrium quantity and price. In this case, more corn is sold at higher prices due to the increased demand resulting from ethanol subsidies.

Therefore, the situation described in the question is an example of the demand curve shifting to the right.

To know more about the demand curve click here:

https://brainly.com/question/13828738

#SPJ11

Eles from the Internet can contain viruses. Unless you need to edit, it's safe to stay in Protected View Enable Editing Case 6.3: The Helsinki Museum of Art and Design 1. Critique the WtA gap analysis. Could there be other explanations for the gaps? 2. Make recommendations for closing the gaps found in the WtA.

Answers

The terms 'Protected View' and 'Enable Editing' to be included, it is assumed that this solution is about Microsoft Office, most likely Microsoft Word. Therefore, the solution to Case 6.3 will be on the computer that runs.

Unless you need to edit, it's safe to stay in Protected View Enable Editing. The above statement is true as a document that is downloaded from the internet can contain viruses. The Protected View mode is a default view in Office Word 2010 and later versions to protect users from documents that are downloaded from the Internet.

The Protected View mode helps protect your computer from various threats like viruses, ransomware, and malware by allowing only the user to view the document and disabling any functionality in the document that could be a potential threat. If a document in Protected View mode requires editing, the user can click on the "Enable Editing" button at the top of the screen to make changes to the document.

It is recommended that the Protected View mode is not disabled as it could lead to a potential threat to your computer.In this case, the Helsinki Museum of Art and Design needs to evaluate its website to find gaps in its website. These gaps were identified in a Web-to-Anything (WtA) gap analysis. Below are the critiques and recommendations for the case:

1. Critique the WtA gap analysis. Could there be other explanations for the gaps? WtA gap analysis is a technique used to find gaps in a website and compare it to its expected behavior. The Helsinki Museum of Art and Design used a WtA gap analysis and found the following gaps: There are several missing links on the site that make it difficult to find information.The museum’s exhibits are only available in Finnish.

The content of the museum’s website is outdated and irrelevant. The website is not optimized for mobile devices.There is a lack of social media presence for the museum. There is a gap between the services offered by the museum and what is expected by visitors. There could be other explanations for the gaps identified in the WtA analysis. The website might not have been updated in a long time, or there could have been errors made in the development process of the website.

2. Make recommendations for closing the gaps found in the WtA. The following are recommendations for closing the gaps found in the WtA analysis: The museum should update the website and remove any outdated information. The museum should translate the exhibits to multiple languages to cater to a diverse audience. The website should be optimized for mobile devices to cater to users that access the website on mobile devices.

The museum should increase its social media presence and advertise its exhibits. The museum should add more links on its website to make it easier to navigate and find information.

To know more about microsoft word, visit:-

brainly.com/question/26695071

#SPJ11

Recommended PR approach in responding to negative social media commentary.
(Please use theories and concepts covered in week 12 to support your recommendations).

Answers

A company's reputation is critical to its success in the market. Negative social media comments can damage a company's reputation, thus a positive PR approach is important.

There are several ways a company can address negative social media commentary, including the following:

Be aware and monitor negative social media commentary:

Social media monitoring helps companies be aware of negative comments or reviews on social media platforms. Companies can then respond to these comments quickly, addressing the issue before it grows bigger.

They can monitor social media platforms through tools such as Hootsuite, Mention, and others.

Be transparent and honest:

When responding to negative social media commentary, companies should be honest and transparent about the issue at hand. They should take responsibility and offer a sincere apology, if necessary. By doing so, the company can regain customers’ trust and respect.

Respond promptly and professionally:

Companies should respond to negative comments or reviews quickly and professionally. They should acknowledge the customer's issue and take appropriate steps to resolve it. The response should be polite, professional, and provide the solution to the customer's problem. In case of any difficulty or issues, the PR team should use a standardized response format, so that there is consistency in communication.

Use social media to tell the company’s story:

By telling their company's story, companies can attract customers and build a loyal following. Companies can use social media to communicate their values, mission, and objectives. This way, customers will know what the company stands for and will be more likely to support them.

The PR approach is crucial for a company in responding to negative social media commentary. Companies must be aware and monitor negative social media commentary, be transparent and honest, respond promptly and professionally, and use social media to tell the company's story. These recommended approaches can help a company maintain its reputation and credibility with its customers. A good reputation is crucial for the success of a company in the market.

Learn more about PR approach from the given link:

https://brainly.com/question/29768064

#SPJ11

Journal Entry
1. Borrowed $ 5000 cash at 3% interest rate for 23 months .
2. Paid the city $ 30 for a one- year operating license for the business
3. Paid $2,400 in advance for Sept., Oct. and Nov. rent of office space .
4. Paid $ 600 for a six month insurance policy with coverage beginning today .

Answers

Journal Entry 1:

Cash (or Bank) increases by $40,000, and Loan Payable increases by $40,000.

Journal Entry 2:

Operating License Expense increases by $30, and Cash (or Bank) decreases by $30.

Journal Entry 3:

Prepaid Rent Expense increases by $2,400, and Cash (or Bank) decreases by $2,400.

Journal Entry 4:

Prepaid Insurance Expense increases by $600, and Cash (or Bank) decreases by $600.

Journal Entry 1:

Date: [Date of borrowing]

Cash (or Bank)                                  5,000

Loan Payable                                               5,000

  (To record the borrowing of $5,000 cash at 3% interest rate for 23 months)

Journal Entry 2:

Date: [Date of payment]

Operating License Expense                 30

Cash (or Bank)                                  30

  (To record the payment of $30 for a one-year operating license for the business)

Journal Entry 3:

Date: [Date of payment]

Prepaid Rent Expense                        2,400

Cash (or Bank)                                  2,400

  (To record the payment of $2,400 in advance for Sept., Oct., and Nov. rent of office space)

Journal Entry 4:

Date: [Date of payment]

Prepaid Insurance Expense                  600

Cash (or Bank)                                  600

  (To record the payment of $600 for a six-month insurance policy with coverage beginning today)

Note: Please replace [Date] with the actual date of the transaction. Also, ensure that the accounts used in the journal entries align with your specific chart of accounts.

learn more about "Expense ":- https://brainly.com/question/14697297

#SPJ11

Generator Contract Management (20) A generator has 100MWh generation capacity and has the following production cost curve C(q)=200+20q+0.1q^2
It enters the operating day with the following contracts: - Seller of a forward contract of 30$/MWh and a quantity of 10MWh; - Seller of a forward contract of 50$/MWh and a quantity of 5MWh; - Buyer of a forward contract of 25$/MWh and a quantity of 5MWh; - A 5MWh put option with 28$/MWh exercise price, the option fee is $100. - A 10MWh call option with 30$/MWh exercise price, the option fee is $50. - A 5MWh call option with 35$/MWh exercise price, the option fee is $50. Calculate the generator output power and option exercises to maximize its profit if (assume the generator cannot be shut down) 1. The spot market price is $22/MWh;(10) 2. The spot market price is $33/MWh. (10)

Answers

To maximize the generator's profit, we need to calculate the generator output power and option exercises under two scenarios: 1. Spot market price is $22/MWh:

Step 1: Calculate the marginal cost: The marginal cost is the derivative of the production cost curve with respect to quantity. C'(q) = 20 + 0.2q Step 2: Determine the generator's output power: To maximize profit, the generator will produce up to its generation capacity until the marginal cost equals the spot market price. 22 = 20 + 0.2q 2 = 0.2q q = 10 MWh The generator's output power will be 10 MWh. Step 3: Analyze the contracts and options: - The generator has a forward contract to sell 10 MWh at $30/MWh. - The generator has a put option to sell 5 MWh at $28/MWh. - The generator has a call option to sell 10 MWh at $30/MWh. Step 4: Calculate the profit: The profit from the forward contract is (30 - 22) * 10 = $80. The profit from the put option is max(28 - 22, 0) * 5 - $100 = $10. The profit from the call option is max(30 - 22, 0) * 10 - $50 = $80. The total profit is $80 + $10 + $80 = $170. 2. Spot market price is $33/MWh: Step 1: Calculate the generator's output power: 33 = 20 + 0.2q 13 = 0.2q q = 65 MWh The generator's output power will be 65 MWh. Step 2: Analyze the contracts and options: - The generator has a forward contract to sell 10 MWh at $30/MWh. - The generator has a forward contract to sell 5 MWh at $50/MWh. - The generator has a put option to sell 5 MWh at $28/MWh. - The generator has a call option to sell 10 MWh at $30/MWh. - The generator has a call option to sell 5 MWh at $35/MWh. Step 3: Calculate the profit: The profit from the forward contracts is (30 - 33) * 10 + (50 - 33) * 5 = $145. The profit from the put option is max(28 - 33, 0) * 5 - $100 = -$75 (option is not exercised). The profit from the call options is max(30 - 33, 0) * 10 + max(35 - 33, 0) * 5 - $50 - $50 = $10. The total profit is $145 + (-$75) + $10 = $80. In conclusion, when the spot market price is $22/MWh, the generator's profit will be $170. When the spot market price is $33/MWh, the generator's profit will be $80.

Learn more about the  Marginal cost:

https://brainly.com/question/17230008

#SPJ11

Where can contribution margin income statements be used?
For a manufacturer, under what condition will operating income be the same regardless of whether a traditional income statement or Contribution margin income statement is used?
Why are contribution margin statements desirable?

Answers

The Contribution margin income statements can be used in various ways and for various purposes, some of which include; a) To calculate the break-even point. This is the point where the total revenue from the sale of a product or service equals the total costs of producing that product or service.


For a manufacturer, operating income will be the same regardless of whether a traditional income statement or Contribution margin income statement is used when the fixed costs are equal. This is because, in both methods, the total sales are deducted by the total variable costs to arrive at the contribution margin, which is then used to cover the fixed costs.
They provide information on the profitability of individual products, which is useful in decision-making, such as pricing, marketing, and product mix. Additionally, they show the relationship between costs, sales, and profits, making it easier to analyze and predict the effects of changes in sales volume on operating profit.

To know more about income visit:

https://brainly.com/question/2386757

#SPJ11

2. Minor Case Study: Winter sports in New England: The New England list of sports excludes a range of activities found in other parts of the world including A) ice fishing, B) dogsledding and C) heli-skiing. Explain how you would create an artificial environment for EACH activity.

Answers

Artificial Environment for each winter sport in New England are: For ice fishing: To create an artificial environment for ice fishing, the first thing that you would have to do is to have an artificial lake, which can be created by digging out a large area and filling it with water.

Once you have an artificial lake, you will have to lower the temperature of the water, so that it freezes over. To do this, you can install a refrigeration system that keeps the water at a constant low temperature or you can build a large freezer that can hold the water.

For dogsledding: To create an artificial environment for dogsledding, you would have to create a trail that mimics the natural terrain found in the region. This could be done by using a bulldozer to create hills, turns, and straightaways, which will give the dogs a chance to run and play.

For heli-skiing: To create an artificial environment for heli-skiing, you would have to have a large indoor space that can simulate the mountain conditions found in the region. This would include having a large mountain, complete with snow, that can be used for skiing and snowboarding.

Learn more about   New England

https://brainly.com/question/4388498

#SPJ11

3-WHAT ARE THE MAIN FACTORS OF EFFECTIVE BUSINESS COMUUNICATION? 4-DISCUSS THE MAIN ELEMENTS OF BUSINESS REPORT?

Answers

The main factors of effective business communication are clarity, conciseness, consistency, completeness, and consideration.

Effective business communication is crucial for transmitting information and ideas accurately within an organization and to external stakeholders. Clarity ensures that the message is easily understood by the intended audience, using clear language and explanations. Conciseness involves conveying information succinctly, focusing on key points without unnecessary details. Consistency maintains a uniform tone and style, reinforcing the organization's brand. Completeness ensures all necessary information is included, addressing potential questions or concerns. Consideration involves adapting the communication to the needs and expectations of the audience, demonstrating empathy and understanding.

In the context of business reports, there are several main elements to consider. The introduction sets the context and purpose, outlining the problem or objective being addressed. The executive summaryprovides a concise overview of the entire report, highlighting key findings, conclusions, and recommendations. The methodology explains the research methods and analysis techniques used. The findings present the results, supported by facts and data. The analysis and interpretation section provides a deeper analysis of the findings, identifying trends or implications. The conclusions summarize the main outcomes and tie back to the objectives.

The recommendations suggest specific actions based on the conclusions. Appendices may include additional supporting materials. By following these elements, business reports effectively communicate complex information in a structured and organized manner, aiding decision-making.

To know more about effective business communication visit : brainly.com/question/31041119?

#SPJ11

1.What is the "Contingency" approach to Leadership? 300 words
You will need to explain and discuss this approach to leadership using 1 academic source and 1 non academic source
2.Leadership Style 500 words
Choose a leadership style from the 5 described on PAGE 3 below, explain and discuss using 1 academic source, and 3 Non-academic source the characteristics of this style. Provide 1 ONE corporate (business leader) examples who use this leadership style:
Person A:
Person B:
Person C:
3. Competencies 500 words
List 2 competencies (skills and abilities) you need to become successful in this style of leadership? Use 1 academic source and 3 non-academic sources to support your ideas and use your previous "Leader example" in section2 to explain and discuss these competencies.
Person A:
Person B:
Person C:
4. Reference List:
Minimum of 3 academic references AND 6 non-academic sources such as blogs, newspapers and business magazines References need to be listed in Alphabetical order. The Harvard referencing system must be used throughout the paper by each student.
Academic
1.
2.
3.
Non-Academic
4.
5.
6.
7.
8.
9
Choice of Leadership Style:
Transformational leadership
Often considered among the most desirable employees, people who show transformational leadership typically inspire staff through effective communication and by creating an environment of intellectual stimulation. However, these individuals are often blue-sky thinkers and may require more detail-oriented managers to successfully implement their strategic visions.
Transactional leadership
Transactional leadership is focused on group organization, establishing a clear chain of command and implementing a carrot-and-stick approach to management activities. It is considered transactional because leaders offer an exchange; they reward good performances, while punishing bad practice. While this can be an effective way of completing short-term tasks, employees are unlikely to reach their full creative potential in such conditions.
Democratic leadership
Also known as participative leadership, this style – as the name suggests – means leaders often ask for input from team members before making a final decision. Workers usually report higher levels of job satisfaction in these environments and the company can benefit from better creativity. On the downside, the democratic process is normally slower and may not function well in workplaces where quick decision-making is crucial.
Charismatic leadership
There is a certain amount of overlap between charismatic and transformational leadership. Both styles rely heavily on the positive charm and personality of the leader in question. However, charismatic leadership is usually considered less favourable, largely because the success of projects and initiatives is closely linked to the presence of the leader. While transformational leaders build confidence in a team that remains when they move on, the removal of a charismatic leader typically leaves a power vacuum

Answers

The contingency approach to leadership asserts that effective leadership is dependent on the leadership style that is most suitable for the situation.


The contingency theory of leadership posits that leaders must use different leadership styles based on the situation. According to this theory, a leader’s effectiveness is determined by the interaction of their personality traits, leadership style, and the situation at hand (Fiedler, 1967).
According to this source by Fiedler (1964), the effectiveness of a leader is dependent on the leadership style that is most appropriate for a situation. The contingency theory suggests that the ideal leadership style is dependent on the unique characteristics of each situation. This article by the Houston Chronicle defines contingency leadership as a leadership style that adapts to the situation. The article states that the contingency approach to leadership recognizes that there are different leadership styles that are effective in various situations.
Transformational leadership is characterized by a leader who inspires and motivates their team by setting an example. Transformational leaders focus on creating an environment that fosters intellectual stimulation and effective communication, thus, inspiring staff to perform at their best (Bass, 1985).
Academic sourceBass (1985) described transformational leadership as a style that inspires followers by appealing to their higher-order needs. Transformational leaders are seen as charismatic and effective communicators who build relationships with their followers. This article by Indeed highlights the characteristics of transformational leadership, including the ability to inspire and motivate others, creativity, and strategic thinking. The article also states that transformational leaders are known to build strong relationships with their team members.
Example of a business leader who uses transformational leadership: Indra Nooyi, former CEO of PepsiCo needed to be successful in transformational leadership
According to this source by Northouse (2004), transformational leadership requires the ability to inspire and motivate others. The leader should also have a vision for the organization and be able to communicate this vision to their team.
Non-academic sourceThis article by Forbes highlights the need for transformational leaders to be creative thinkers, strategic, and excellent communicators. The article also notes that transformational leaders should be willing to take risks and challenge the status quo.
Indra Nooyi, the former CEO of PepsiCo, is known for her transformational leadership style. To be successful in this style of leadership, a leader needs to have the ability to inspire and motivate others, communicate effectively, be creative, strategic, and willing to take risks.
Reference List
Academic
1. Bass, B. (1985). Leadership and performance beyond expectations. New York: Free Press.2. Fiedler, F. (1964). A contingency theory of leadership effectiveness. In L. Berkowitz (Ed.), Advances in experimental social psychology (Vol. 1, pp. 149-190). Academic Press.3. Northouse, P. G. (2004). Leadership: Theory and practice (3rd ed.). Sage Publications.
Non-Academic
4. Forbes. (2020). What is transformational leadership? Examples, benefits, and more.5. Houston Chronicle. (n.d.). What is a contingency approach to leadership? 6. Indeed. (2021). Transformational leadership: Definition, tips, and examples.7. PepsiCo. (n.d.). Our history.8. Small Business - Chron. (n.d.). Advantages and disadvantages of transformational leadership.9. The Economic Times. (2018). Indra Nooyi, the first woman of Indian origin to head global beverage giant PepsiCo, stepped down.

Learn more about transformational leadership here:

https://brainly.com/question/28784209

#SPJ11

P paid their car lease payment for 12 months in the current year totaling $11,400 including 13% HST. O is required to use the car for employment and to pay her own car expenses. She estimates that the car is used 60% for employment purposes. What is the maximum deduction from employment income for tax purposes available to P for the current year?

Answers

The maximum deduction from employment income for tax purposes available to P for the current year is $5,950.80, calculated based on the business use percentage of the car lease payment.

To calculate the maximum deduction from employment income for tax purposes available to P for the current year, we need to determine the portion of the car lease payment that is eligible for deduction based on the percentage of business use.

1. Calculate the HST portion of the car lease payment:

  Car lease payment = $11,400

  HST rate = 13%

  HST amount = Car lease payment * HST rate

              = $11,400 * 0.13

              = $1,482

2. Calculate the portion of the car lease payment that is eligible for deduction:

  Total car lease payment (excluding HST) = Car lease payment - HST amount

                                          = $11,400 - $1,482

                                          = $9,918

  Deductible car lease payment = Total car lease payment * Business use percentage

                              = $9,918 * 0.60

                              = $5,950.80

Therefore, the maximum deduction from employment income for tax purposes available to P for the current year is $5,950.80.

learn more about "tax ":- https://brainly.com/question/30157668

#SPJ11

At December 31, 2020, Tojosa Corporation reported a deferred tax liability of $240,000 which was attributable to a taxable temporary difference of $800,000. The temporary difference is scheduled to reverse in 2024. In 2021, a new tax law increased the corporate tax rate from 20% to 35%.
How should Tojosa Corporation report this change?
Solution
$ 800,000 X(35%-20%) = 120,000. Tojosa Corporation should record this change by debiting income tax expense for $ 120,000.

Answers

According to the given scenario, Tojosa Corporation reported a deferred tax liability of $240,000 on December 31, 2020, which was related to a taxable temporary difference of $800,000.

The temporary difference is scheduled to reverse in 2024. In 2021, a new tax law increased the corporate tax rate from 20% to 35%.To report the change, Tojosa Corporation should debit income tax expenses for $120,000. The change in the corporate tax rate would result in a higher tax expense for Tojosa Corporation. The calculation of the tax expense increase is as follows:$800,000 × (35% - 20%) = $120,000.

Therefore, Tojosa Corporation should record this change by debiting income tax expenses for $120,000.

To learn more about tax expense, visit here

https://brainly.com/question/31815433

#SPJ11

Based on the Tesco BBC video, what you do think Tesco did wrong? As an outside auditor, could you have prevented their problems?

Answers

Based on the Tesco BBC video, Tesco faced a false accounting scandal that led to an investigation by the Serious Fraud Office in 2014.

The scandal led to a significant loss of market value and customer confidence in the company, and it all happened due to Tesco's overstatement of profits. The fraud scandal was due to a financial reporting error. Tesco booked payments from suppliers who delivered goods before the end of the period, but which were not due until the following year. As a result, Tesco overstated its profits by £246m. As a result, this was a blatant violation of accounting principles, which resulted in the scandal. Auditors are responsible for verifying financial statements to ensure that they are accurate and meet regulatory requirements. However, it is unclear how much the external auditor, PwC, knew about Tesco's accounting methods. They may have been misled by the company's bookkeeping techniques, which may have been hard to notice without an in-depth investigation.Because auditors are only required to provide a reasonable assurance that a company's financial statements are accurate, it may be difficult to prevent problems like this.

However, as an outside auditor, there may be some ways to identify potential accounting problems during the auditing process. For example, an auditor could conduct more in-depth testing or question some of the company's accounting methods.

To learn more about auditors, visit here

https://brainly.com/question/32632603

#SPJ11

Other Questions
true or false euclidean geometry is geometry on a sphere Consider the closed-loop transfer function 35 T(s) = s + 12s + 35 Obtain the impulse response analytically and compare the result to one obtained using the impulse function. What were some of the economic effects of World War II? Choose two correct answers.Cities, industries, and infrastructure were destroyed.The USSR provided economic relief.Public transportation was improved.Businesses were unharmed.Farms were ruined For the sequence -27,-12, 3, 18,..., the expression that defines the nth term where a, = -27 is An airplane starts from rest on the runway. The engines exert a constant force of 78.0 KN on the body of the plane mass 9 20 104 kg! during takeol How far down the runway does the plane reach its takeoff speed of 58.7 m/s? What effect does consolidation have on the financial reporting for transactions with controlled entities? Please also cite and discuss a a real-life example of this that you found in your research. Which one of the following statements is incorrect: A. A type I error consists of rejecting the null hypothesis when it is trueB. A type Il error consists of accepting the null hypothesis when it is false C. You can control simultaneously both the Type I and Type II error probabilities when the sample size is fixed D. Hypothesis testing and confidence intervals are related concepts 1.D 2.A 3.C 4.B please helpChoose all of the following that apply to osmium, Os. a. Metalloid b. Halogen c. Transition metal d. Main group element e. Nonmetal f. Alkali metal g. Metal h. Inner-transition metal A construction worker needs to put a rectangular window in the side of abuilding. He knows from measuring that the top and bottom of the windowhave a width of 8 feet and the sides have a length of 15 feet. He alsomeasured one diagonal to be 17 feet. What is the length of the otherdiagonal?OA. 23 feetOB. 15 feetO C. 17 feetOD. 8 feet How does the trapped charge in the gate oxide affect theVfb? State the five stages of Kubler Ross model. Discuss thefive stages in detail, providing at least (2) examples of eachstage. The formula for converting degrees Fahrenheit (f) to degrees Celsius (c) is =5/9 (f-32).find c for f=5 4. Consider a class Figure from which several kinds of figures - say rectangle, circle, triangle 10 etc. can be inherited. Each figure will be an object of a different class and have different data members and member functions. With the help of virtual functions, model this scenario such that only those object member functions that need to be invoked at runtime are executed. You may use UML design concepts/virtual function code snippets to model the scenario. marbles rolling down the ramp and horizontally off your desk consistently land 48.0 cm from the base of your desk. ypur desk is 84.0 cm high. if you pull your desk over to the window of your second story room and launch marbles to the ground (6.56 meters below the desk top), how far out into the yard will the marbles land? QuestionWhich statements about West African kingdoms of the 1300s and 1400s are true?Choose all answers that are correct.ResponsesThe rainforest of Africa supports grasses and other plants and birds, but its soil is too wet for the roots of tall trees.The kingdom of Benin was known for its skilled brass makers and well-organized capital.Sunni Ali, ruler of Songhai, conquered Mali and destroyed the city of Timbuktu.Benin was located in the Savanna and relied on the large animals found there for food. centrifugal water pump has an impeller with outer radius 30cm, inner radius 10cm, vane angle at inlet, B1 =160 and vane angle at outlet pz=170. The impeller is 5cm wide at inlet and 2.5cm wide at outlet. Neglecting losses, determine; (a) the discharge for shockless entrance (a) = 909) for pump speed of 1800 rpm Suppose that in a market with perfect competition, the market demand function is given by Qd = 1200 50p. Every firm in the industry has a short-run opportunity cost of production given by Csr(q) = 2q^2.(a). Compute each firms short-run supply curve.(b). If there are 600 firms, what is the short-run equilibrium price and quantity in this market?(c). If each firms long-run opportunity cost function is given by Clr(q) = 2q^2 + 2 + q, and there are an unlimited number of firms available with this cost function, what is the long-run equilibrium price in the market? How many firms will be producing? Which one is the legal identifiers? O a. C. var3 O b. D. private O C. A. 3var O d. B. #othervar Which is the return type of the method main()? O a. C. Boolean O b. B. void OC. D. static O d. A. int Question 3 Not yet answered Marked out of 3:00 TFUE Question Question 4 Not yet answered Marked out of 3.00 T. FUE question Which is Java primitive types? O & A short Ob. C. Integer OC D. Float O d. 8. Boolean 4. What will be the result when you attempt to compile this program? public class Rand( public static void main(String argvX int iRand; Rand Math.random() System.out.println(Rand) } ) OaC. A random number between 0 and 1 Ob A Compile time error referring to a cast problem OC B. A random number between 1 and 10. Od. D. A compile time error about random being an unrecognised method Question 6 Not yet answered Marked out of 3.00 Rug question Class Teacher and Student are subclass of class Person Person p Teacher t Students p.tands are all non-null ift instanceof Person) (s (Student); } What is the result of this sentence? A. It will construct a Student object. b. D. It is legal at compilation but possible illegal at runtime. O Ct is illegal at compilation d. B. The expression is legal. Question 7 Not yet answered Marked out of 3.00 Tag question What will happen if you try to compile and run the following code public class MyClass( public static void main(String arguments[]) { amethod(arguments); > public void amethod(String[] arguments) ( System.out.printin(arguments System.out.println(arguments[1] } > B. error method main not correct Obc error array must include parameter O.D. amethod must be declared with String Od A error Can't make static reference to void amethod. Question 8 Not yet answered Marked out of 3:00 Flag question Question 9 Not yet answered Marked out of 3.00 Fig question What will happen if you compile/run the following lines of code? int[] Array new int[10]; System.out.println(Array length); OF D. Runtime exception at line 3. Ob. 8. Prints 15. OC. Compilation error, you can't change the length of an array O d. A. Prints 10. What is the size of type byte? Oc-255 to 256 Ob A-128 to 127 OC 8. (-2 power 8)-1 to 2 power 8 Od D. depends on the particular implementation of the Java Virtual machine Question 10 Not yet answered Marked out of 1.00 Flag question public class Person static int arr[]-new int[10]; public static void main(String a System.out.println(arr[13) } Which statement is correct? a. It is correct when compilation but will cause error when running. Ob. The output is zero. O.C. When compilation some error will occur. Od. The output is null A linear liquid-level control system has input control signal of 2 to 15 V is converts into displacement of 1 to 4 m. (CLO1) i. Determine the relation between displacement level and voltage. [5 Marks] ii. Find the displacement of the system if the input control signal 50% from its full-scale c) A controller output is a 4 to 20 mA signal that drives a valve to control flow. The relation between current, I and flow, Q: Q = 30 [/- 2 mA] /2 liter/min. i. What is the flow for 15 mA? [2.5 Marks] ii. What current produces a flow of 1 liter/min? [2.5 Marks] A steel wire 34 ft long, hanging vertically, supports a load of 865 lb. Neglecting the weight of the wire, determine the maximum strain if the stress is not to exceed 23 ksi and the total elongation is not to exceed 0.32 in. Assume E = 29 10^6 psi.