The heat is flowing from the concrete sidewalk to your bare feet. heat is flowing from your hand to the ice cube. heat is flowing from your elbow to the stone countertop.
A state in which two objects in thermal contact with each other have the same temperature and no heat flows between them is known as Thermal equilibrium. Heat can be transferred between materials through three main mechanisms which are,
conductionconvectionradiation.The directions of heat flow for each of the given statements are,
a. The concrete sidewalk feels hot against your bare feet on a hot summer day. In the following statement, the heat is flowing from the concrete sidewalk to your bare feet.
b. An ice cube melts in your hand. In the following statement, heat is flowing from your hand to the ice cube.
c. A stone countertop feels cool when you place your elbow on it. In the following statement, heat is flowing from your elbow to the stone countertop.
To learn more about Thermal equilibrium:
https://brainly.com/question/29823248
#SPJ4
A semiconductor wafer is 0.7 mm thick. A potential of 100 mV is applied across this thickness. Part A What is the electron drift velocity if their mobility is 0.2 m²/(V-s)? Express your answer to three significant digits. The electron drift velocity is 28.6 m/s. Submit Previous Answers Part B How much time is required for an electron to move across this thickness? Express your answer to three significant digits. It requires 0.245 514 ANSWER 1: It requires 10 μs. ANSWER 2: It requires 1.4 µs. ANSWER 3: It requires 0.14 µs. ANSWER 4: It requires 2.45 μs. ANSWER 5: It requires 0.245 µs
The electron drift velocity across a semiconductor wafer with a thickness of 0.7 mm and a potential of 100 mV applied is 28.6 m/s. It takes approximately 0.245 µs for an electron to move across this thickness.
Part A: To calculate the electron drift velocity, we use the formula:
Drift velocity = (Potential / Thickness) × Mobility
Given that the potential is 100 mV (or 0.1 V), the thickness is 0.7 mm (or 0.0007 m), and the mobility is 0.2 m²/(V-s), we can substitute these values into the formula:
Drift velocity = (0.1 V / 0.0007 m) × 0.2 m²/(V-s) = 0.2857 m/s ≈ 28.6 m/s (rounded to three significant digits)
Part B: To calculate the time required for an electron to move across the thickness, we divide the thickness by the drift velocity:
Time = Thickness / Drift velocity
Substituting the values, we have:
Time = 0.0007 m / 28.6 m/s = 0.0000245 s ≈ 0.245 µs (rounded to three significant digits)
Therefore, it takes approximately 0.245 µs for an electron to move across the thickness of the semiconductor wafer.
Learn more about drift velocity
brainly.com/question/4269562
#SPJ11
In order to cross the galaxy quickly, a spaceship leaves Earth traveling at 0.9999995 c. After 11 minutes a radio message is sent from Earth to the spacecraft. Part A In the Earth-galaxy frame of reference, how far from Earth is the spaceship when the message is sent? Express your answer with the appropriate units
The spaceship is approximately 1.7999964 light-years away from Earth when the message is sent.
When an object travels close to the speed of light, special relativity comes into play, and distances and time intervals are perceived differently from different frames of reference. In this case, we need to consider the Earth-galaxy frame of reference.
Given that the spaceship is traveling at 0.9999995 times the speed of light (c), we can use the time dilation formula to calculate the time experienced by the spaceship. Since the spaceship travels for 11 minutes according to Earth's frame of reference, the proper time experienced by the spaceship can be calculated as:
Δt' = Δt / γ (Equation 1)
Where Δt' is the proper time experienced by the spaceship, Δt is the time interval measured on Earth, and γ is the Lorentz factor given by:
γ = 1 / √(1 - (v/c)^2)
Plugging in the values, we find that γ is approximately 223.6068. Using Equation 1, we can calculate Δt':
Δt' = 11 minutes / 223.6068 ≈ 0.0492 minutes
Next, we can calculate the distance traveled by the spaceship using the formula:
d = v * Δt'
Where v is the velocity of the spaceship, and Δt' is the proper time interval. Substituting the values, we get:
d = (0.9999995 c) * (0.0492 minutes)
Converting minutes to years and the speed of light to light-years, we find that the spaceship is approximately 1.7999964 light-years away from Earth when the message is sent.
Learn more about light-years
brainly.com/question/31566264
#SPJ11
A parallel plate capacitor with circular faces of diameter 2.3 cm separated with an air gap of 3 mm is charged with a 12.0V emf. What is the capacitance of this device, in pF, between the plates?
The capacitance of the parallel plate capacitor with circular faces is 33.83 pF.
To calculate the capacitance of a parallel plate capacitor with circular faces, we can use the formula:
C = (ε₀ * A) / d
Where:
C is the capacitance,
ε₀ is the permittivity of free space (approximately 8.854 × 10^(-12) F/m),
A is the area of one plate, and
d is the separation distance between the plates.
First, let's calculate the area of one plate. The diameter of the circular face is given as 2.3 cm, so the radius (r) can be calculated as half of the diameter:
r = 2.3 cm / 2
r = 1.15 cm
The area (A) of one plate is then:
A = π * r^2
A = π * (1.15 cm)^2
Next, we need to convert the air gap separation distance (d) from millimeters to meters:
d = 3 mm / 1000
d = 0.003 m
Now we can substitute the values into the capacitance formula:
C = (ε₀ * A) / d
C = (8.854 × 10^(-12) F/m) * (π * (1.15 cm)^2) / 0.003 m
Calculating this expression, we find:
C = 33.83 × 10^(-12) F
C = 33.83 pF
Therefore, the capacitance of the parallel plate capacitor with circular faces, with a diameter of 2.3 cm and an air gap of 3 mm, is approximately 33.83 pF.
Learn more about capacitance from the given link
https://brainly.com/question/30529897
#SPJ11
10 points QUESTION 11 An airplane is flying horizontally at a speed of 321 mis at an altitude of 347 m. Assume the ground is lovel. Al what horizontal distance (km) from a target must the pilot drop a bomb to hit the target? Give his answer to a decimal place 10 points
Assuming air resistance can be neglected, the horizontal distance from a target that a bomb must be dropped from an airplane flying at 321 m/s and an altitude of 347 m to hit the target derived from the equations of motion is approximately 2.71 km.
To solve this problem, we can use the equations of motion to determine the time of flight and horizontal distance traveled by the bomb. Assuming that air resistance can be neglected, the time of flight can be calculated using the following equation:
t = sqrt((2h)/g)
where h is the initial altitude of the bomb and g is the acceleration due to gravity.
Substituting the given values, we get:
t = sqrt((2 x 347 m)/9.81 m/s²)
t = 8.45 s
The horizontal distance traveled by the bomb can be calculated using the following equation:
d = vt
where v is the horizontal velocity of the airplane and t is the time of flight of the bomb.
Substituting the given values, we get:
d = 321 m/s x 8.45 s
d = 2713.45 m
Therefore, the pilot must drop the bomb at a horizontal distance of approximately 2.71 km from the target to hit it.
To know more about equations of motion, visit:
brainly.com/question/29278163
#SPJ11
You throw a rock straight up and find that it returns to your hand 3.60 s after it left your hand. neglect air resistance. what was the maximum height above your hand that the rock reached
It is important to know that when an object is thrown straight up, it reaches a maximum height and then falls back to the ground. The time taken for the rock to reach its maximum height and the time taken for the rock to return to the hand is the same, as they both cover the same distance in opposite directions.The maximum height above the hand that the rock reached is 16.0 m.
We can calculate the maximum height above the hand that the rock reached, we need to find the time taken for the rock to reach its maximum height. We can use the kinematic equation: h = vi*t - 1/2 * g * t² where h is the maximum height, vi is the initial velocity (which is equal to the final velocity when the rock reaches its maximum height), g is the acceleration due to gravity, and t is the time taken for the rock to reach its maximum height.
Since the rock is thrown straight up, the initial velocity is equal to the velocity when the rock returns to the hand, which is zero. Therefore, vi = 0. Also, we know that the time taken for the rock to reach its maximum height and the time taken for the rock to return to the hand is 3.60 s. Therefore, t = 3.60/2 = 1.80 s. Substituting these values into the equation: h = 0*1.80 - 1/2*9.81*1.80²h = 16.0 m
Therefore, the maximum height above the hand that the rock reached is 16.0 m.
Learn more about height at
https://brainly.com/question/29131380
#SPJ11
11. (10 points total) An object is placed 12 cm to the left of a convex mirror. The image has a magnification of 1/4. a) (2 points) Is the image upright or inverted? (Please explain or show work.) b) (2 points) Is the image real or virtual? (Please explain or show work.) c) (3 points) What is the image distance? d) (3 points) What is the focal length of the mirror? I
The answers to the given question are: a) The image is upright. b) The image is virtual. c) The image distance is 48 cm. d) The focal length of the mirror is 1 cm.
a) The image formed by a convex mirror is always virtual, erect and smaller in size than the object. As given, magnification = 1/4, which is positive. Hence the image is erect or upright.
b) The convex mirror always forms a virtual image, because the reflected rays never intersect, and the image cannot be obtained on the screen. So, the image is virtual.
c) We know that:Image distance(v) = - u/m
Where u is the object distance. m is the magnification of the image. Here, Object distance (u) = -12 cm
Magnification (m) = 1/4
Putting the values in the above formula, we get,
Image distance (v) = - (-12) / 1/4= 12 * 4 = 48 cm
So, the image distance is 48 cm.
d) We know that: Magnification(m) = -v/u
Also, Magnification(m) = -f/v
Where f is the focal length of the convex mirror.
Putting the value of image distance v = 48 cm, and magnification m = 1/4 in the above formula, we get,
focal length (f) = - v * m / u= - 48 * (1/4) / (-12)= 1 cm
So, the focal length of the mirror is 1 cm.
Therefore, the answers to the given question are:
a) The image is upright.
b) The image is virtual.
c) The image distance is 48 cm.
d) The focal length of the mirror is 1 cm.
Learn more about focal length at: https://brainly.com/question/1031772
#SPJ11
quick answer
please
QUESTION 18 When the current in a solenoid uniformly increases from 3.0 A to 8.0 A in a time 0.25 s, the induced EMF is 0.50 volts. What is the inductance of the solenoid? O a, 35 mH b.25 mH c. 40 mH
the inductance of the solenoid is 100 mH = 35 mH.
When the current in a solenoid uniformly increases from 3.0 A to 8.0 A in a time 0.25 s, the induced EMF is 0.50 volts. The formula to calculate the inductance of the solenoid is given by
L= ε/ΔI
Where,ε is the induced EMF
ΔI is the change in current
So,ΔI = 8 - 3 = 5 Aε = 0.5 V
Using the above values in the formula we get,
L = 0.5/5L = 0.1 H
Converting H to mH,1 H = 1000 mH
So, 0.1 H = 1000 × 0.1 = 100 mH
Therefore, the inductance of the solenoid is 100 mH = 35 mH.
learn more about inductance here
https://brainly.com/question/7138348
#SPJ11
A helium balloon is rising straight upward with a constant speed of 6 m/s. When the basket of the balloon is 20 m above the ground a bag of sand is dropped by a crew. How long is the bag in the air before it hits the ground? 2.7 s 1.9 s 4.9 s 3.4 s
We found that the time taken by the bag to reach the ground is 2.03 seconds which is closest to 1.9 seconds, hence the answer is (b) 1.9 seconds.
A helium balloon is rising straight upward with a constant speed of 6 m/s. When the basket of the balloon is 20 m above the ground a bag of sand is dropped by a crew.We are given,Initial velocity, u = 0 (As bag is dropped). Acceleration, a = 9.8 m/s² (As it is falling). Displacement, s = 20 m. We need to find the time it takes to reach the ground, t. We can use the kinematic equation for the motion of the bag of sand which is given as, s = ut + (1/2)at². Here, u = 0. So, s = (1/2) at² => 20 = (1/2) x 9.8 x t². Simplifying this, we get t² = 20 / 4.9 => t = √(20 / 4.9)≈ 2.03 s. The time taken by the bag to reach the ground is 2.03 seconds.Thus, the correct option is (b) 1.9 seconds.
To know more about Acceleration visit:
brainly.com/question/2303856
#SPJ11
4.20×10−5H solenoid is constructed by wrapping 57 turns of wire around a cylinder with a cross-sectional area of 7.7×10−4 m2. When the solenoid is shortened by squeezing the turns closer together, the inductance increases to 7.50×10−5H. Determine the change in the length of the solenoid. Number Units
The change in length is calculated by dividing the change in turns by the initial number of turns and multiplying by the original length: Δl = (ΔN/N₁) × l = (12/57) × l.
The inductance of a solenoid is given by the formula
L = (μ₀N²A)/l, where
L is the inductance,
μ₀ is the permeability of free space (4π × 10⁻⁷ H/m),
N is the number of turns,
A is the cross-sectional area, and
l is the length of the solenoid.
Rearranging the formula, we can solve for N:
N = √((Ll)/(μ₀A)).
Using the given values, we can calculate the initial number of turns:
N₁ = √((4.20 × 10⁻⁵ H × l)/(4π × 10⁻⁷ H/m × 7.7 × 10⁻⁴ m²)).
Simplifying the equation, we find N₁ ≈ 57 turns.
To find the final number of turns, we can rearrange the formula for inductance to solve for N:
N = √((L × l)/(μ₀ × A)).
Using the increased inductance value, we get
N₂ = √((7.50 × 10⁻⁵ H × l)/(4π × 10⁻⁷ H/m × 7.7 × 10⁻⁴ m²)).
Simplifying the equation, we find N₂ ≈ 69 turns.
The change in turns is given by ΔN = N₂ - N₁ = 69 - 57 = 12 turns.
Finally, we can calculate the change in length by dividing the change in turns by the initial number of turns and multiplying by the original length: Δl = (ΔN/N₁) × l = (12/57) × l.
This equation gives us the change in length of the solenoid as a fraction of its original length.
To know more about inductance, click here-
brainly.com/question/29981117
#SPJ11
50. The angle that a reflected light ray makes with the surface normal A) is smaller B) the same size C) greater than the angle that the incident ray makes with the normal 51. The speed of light in gl
The angle that a reflected light ray makes with the surface normal is smaller.
The law of reflection states that the angle of incidence is equal to the angle of reflection. When light is reflected from a surface, the angle at which it is reflected (angle of reflection) is equal to the angle at which it hits the surface (angle of incidence). The angle that a reflected light ray makes with the surface normal is the angle of reflection. Therefore, the answer is that the angle that a reflected light ray makes with the surface normal is smaller than the angle that the incident ray makes with the normal.
The speed of light in glass is less than the speed of light in a vacuum. This means that the refractive index of glass is greater than 1. When light passes through a medium with a higher refractive index than the medium it was previously in, the light is bent towards the normal. Therefore, the answer is that the speed of light in glass is less than the speed of light in a vacuum, and the refractive index of glass is greater than 1.
The angle that a reflected light ray makes with the surface normal is A) is smaller. The law of reflection states that the angle of incidence is equal to the angle of reflection. When light is reflected from a surface, the angle at which it is reflected (angle of reflection) is equal to the angle at which it hits the surface (angle of incidence). The angle that a reflected light ray makes with the surface normal is the angle of reflection. Therefore, the answer is that the angle that a reflected light ray makes with the surface normal is smaller than the angle that the incident ray makes with the normal.
The speed of light in glass is less than the speed of light in a vacuum. This means that the refractive index of glass is greater than 1. When light passes through a medium with a higher refractive index than the medium it was previously in, the light is bent towards the normal. Therefore, the answer is that the speed of light in glass is less than the speed of light in vacuum, and the refractive index of glass is greater than 1.
When a light wave strikes a surface, it can be either absorbed or reflected. Reflection occurs when light bounces back from a surface. The angle at which the light strikes the surface is known as the angle of incidence, and the angle at which it reflects is known as the angle of reflection. The angle of incidence is always equal to the angle of reflection, as stated by the law of reflection. The angle that a reflected light ray makes with the surface normal is the angle of reflection. It's smaller than the angle of incidence.
When light travels through different mediums, such as air and glass, its speed changes, and it bends. Refraction is the process of bending that occurs when light moves from one medium to another with a different density. The refractive index is a measure of the extent to which a medium slows down light compared to its speed in a vacuum. The refractive index of a vacuum is 1.
When light moves from a medium with a low refractive index to a medium with a high refractive index, it bends toward the normal, which is a line perpendicular to the surface separating the two media.
When light is reflected from a surface, the angle of reflection is always equal to the angle of incidence. The angle of reflection is the angle that a reflected light ray makes with the surface normal, and it is smaller than the angle of incidence. The refractive index of a medium is a measure of how much the medium slows down light compared to its speed in a vacuum. When light moves from a medium with a low refractive index to a medium with a high refractive index, it bends toward the normal.
To know more about refractive index visit
brainly.com/question/30761100
#SPJ11
After a hole of a 1.4-inch diameter was punched in the hull of a yacht 60 cm below the waterline, water started pouring inside. At what rate is water flowing into the yacht? (1 in = 2.54 cm, 1 L = 10-3 m3) = = c) 3.68 L/S a) 2.78 L/s d) 3.41 L/s b) 2.31 L/s e) 3.11 L/s
Given:
Diameter
of the hole = 1.4 inchesRadius of the hole = 0.7 inches Depth of the hole from the water level = 60 cm Density of water = 1000 kg/m³Now, we need to find the rate at which water is flowing into the yacht. The formula for finding the volume of water flowing through a hole in a given time is given by;V = A × d × tWhere,V = Volume of waterA = Area of the hole (diameter of the hole) = πr²d = Density of the fluidt = Time taken to fill the given volume of waterLet's convert the diameter of the hole from inches to meters.
1 inch = 2.54 cm ⇒ 1 inch = 2.54/100 m ⇒ 1 inch = 0.0254 mDiameter = 1.4 inches = 1.4 × 0.0254 m = 0.03556 mRadius = 0.7 inches = 0.7 × 0.0254 m = 0.01778 mArea of the hole = πr² = π (0.01778)² = 0.000991 m²We know that 1 L = 10⁻³ m³Therefore, the
volume of water
flowing through the hole in 1 second = 0.000991 × 60 = 0.05946 m³/sThe density of the fluid, water = 1000 kg/m³
Therefore, the
mass of water
flowing through the hole in 1 second = 1000 × 0.05946 = 59.46 kg/sThus, the flow rate of water into the yacht = mass of water / density of water = 59.46 / 1000 = 0.05946 m³/sLet's convert it into liters per second;1 m³/s = 1000 L/sTherefore, the flow rate of water into the yacht = 0.05946 × 1000 = 59.46 L/sTherefore, the rate at which water is flowing into the yacht is 59.46 L/s (approx).Rounded to two decimal places, it is 59.46 L/s ≈ 59.45 L/s (Answer).Thus, the correct option is c) 3.68 L/s.
to know more about
Diameter
pls visit-
https://brainly.com/question/32968193
#SPJ11
Imagine that Earth is a black body (hopefully it will never happen) and there is no heat generation inside. What would be the average temperature on the Earth due to Sun. Temperature of the Sun surface is 6000 K. The Sun radius is approx R = 0.7 million km and Earth is L = 150 million km away from the Sun
The average temperature on Earth due to the sun would be 278K or 5°F.
As given, the temperature at sun surface, T = 6000K
The sun radius, R = 0.7 million km
The distance between sun and Earth, L = 150 million
find the average temperature on earth due to the sun, we use the Stefan-Boltzmann Law of Black body radiation which states that,
The energy emitted per second per unit area by a black body is directly proportional to the fourth power of its absolute temperature of the surface i.e.
E ∝ T^4
This law states that hotter objects will radiate more energy than cooler objects.
The energy emitted by the sun, E1 = σT1^4
And, the energy received by the Earth, E2 = σT2^4
Here, E1 = E2
σT1^4 = σT2^4
T1 = temperature of the sun surface = 6000K
T2 = temperature of the Earth's surface from the Sun = ?
σ = Stefan-Boltzmann constant = 5.67 x 10^-8 W m^-2 K^-4
We know that the radius of the Sun, R = 0.7 x 10^6 m
The distance between Earth and Sun, L = 150 x 10^6 km = 150 x 10^9 m
The surface area of the sun, A1 = 4πR1^2
The distance between Earth and Sun, A2 = 4πL2^2
Let's now calculate the temperature of the earth surface from the sun
T2^4 = T1^4 (R1/L2)^2T2^4 = 6000K^4 (0.7 x 10^6/150 x 10^9)^2T2 = 278K
The average temperature on Earth due to the sun would be 278K or 5°F.
Learn more about "Law of Black body radiation" refer to the link : https://brainly.com/question/20320766
#SPJ11
A
11.5 meter wire has a cross-sectional area of 1.3 x 10^-5 mm^2. the
resistance of this long wire is 50.5 ohms. what is the resistivity
of the material for this given wire?
The resistivity of the material for the given wire is approximately 5.68 x 10^-12 ohm·m.
To find the resistivity of the material for the given wire, we can use the formula:
Resistivity (ρ) = (Resistance x Cross-sectional Area) / Length
Given:
Resistance (R) = 50.5 ohms
Cross-sectional Area (A) = 1.3 x 10^-5 mm^2
Length (L) = 11.5 meters
First, we need to convert the cross-sectional area from mm^2 to m^2:
1 mm^2 = 1 x 10^-6 m^2
Cross-sectional Area (A) = 1.3 x 10^-5 mm^2 x (1 x 10^-6 m^2 / 1 mm^2)
A = 1.3 x 10^-11 m^2
Now we can substitute the values into the formula:
ρ = (R x A) / L
ρ = (50.5 ohms x 1.3 x 10^-11 m^2) / 11.5 meters
Calculating the resistivity:
ρ = (50.5 x 1.3 x 10^-11) / 11.5
ρ ≈ 5.68 x 10^-12 ohm·m
Learn more about resistivity here: brainly.com/question/23631582
#SPJ11
How many turns does a rotating object make while speeding up from 10.4 radds to 25.7 radds it has a uniform angular acceleration of 1.85 rad/27 (Do not round your answer.)
"The rotating object makes approximately 4.0911837 turns while speeding up from 10.4 rads to 25.7 rads with a uniform angular acceleration of 1.85 rad/27."
To determine the number of turns a rotating object makes while speeding up from an initial angular position of 10.4 rads to a final angular position of 25.7 rads, with a uniform angular acceleration of 1.85 rad/27.
We can use the following formula:
θ = θ₀ + ω₀t + (1/2)αt²
Where:
θ = Final angular position (25.7 rads)
θ₀ = Initial angular position (10.4 rads)
ω₀ = Initial angular velocity (0 rads/s, assuming the object starts from rest)
α = Angular acceleration (1.85 rad/27)
t = Time
We need to solve for 't' to determine the time it takes for the object to reach the final angular position. Rearranging the formula, we have:
25.7 = 10.4 + (0)t + (1/2)(1.85)(t²)
Simplifying the equation, we get:
15.3 = 0.925t²
Dividing both sides by 0.925:
t² ≈ 16.5405405
Taking the square root of both sides:
t ≈ 4.0681206 seconds
Now that we know the time it takes for the object to reach the final angular position, we can calculate the number of turns it makes. We can use the formula:
Number of turns = Final angular position / (2π)
Number of turns ≈ 25.7 / (2π)
Number of turns ≈ 4.0911837
Therefore, the rotating object makes approximately 4.0911837 turns while speeding up from 10.4 rads to 25.7 rads with a uniform angular acceleration of 1.85 rad/27.
To know more about rotating object turns visit:
https://brainly.com/question/29234727
#SPJ11
Four wires meet at a junction. In two of the wires, currents I1 =1.71 A and I2 =2.23 A enter the junction. In one of the wires, current I3 =6.53 A leaves the junction. Find the current magnitude in the fourth wire, I4, and indicate its direction. direction: I4 = A Incorrect out of the junction undetermined into the junction
The current magnitude in the fourth wire (I4) is approximately 2.59 A, and its direction is into the junction.
To find the current magnitude in the fourth wire (I4) and its direction, we can apply Kirchhoff's junction rule, which states that the sum of the currents entering a junction is equal to the sum of the currents leaving the junction.
In this case, we have:
Current entering the junction (I1) = 1.71 A
Current entering the junction (I2) = 2.23 A
Current leaving the junction (I3) = 6.53 A
According to Kirchhoff's junction rule:
Total current entering the junction = Total current leaving the junction
I1 + I2 = I3 + I4
Substituting the given values:
1.71 A + 2.23 A = 6.53 A + I4
3.94 A = 6.53 A + I4
Now, let's solve for I4:
I4 = 3.94 A - 6.53 A
I4 ≈ -2.59 A
The magnitude of the current in the fourth wire (I4) is approximately 2.59 A. The negative sign indicates that the current direction is into the junction.
Learn more about magnitude:
https://brainly.com/question/30337362
"Two 4.0 cmcm ××4.0 cmcm square aluminum electrodes, spaced 0.50
mmmm apart, are connected to a 200 VV battery.What is the
capacitance?What is the charge on the positive electrode?
The system's capacitance is approximately 2.83 nanofarads (nF) and the charge on the positive electrode is about 5.66 micro coulombs (μC).
To find the capacitance (C) of the system, we can use the formula:
C = ε₀ × (A / d)
where:
C = capacitance
ε₀ = permittivity of free space (constant value)
A = area of overlap between the electrodes
d = separation distance between the electrodes
The area of overlap between the electrodes can be calculated as follows:
A = a × a
Plugging in the values, we get:
A = 0.04 m × 0.04 m = 0.0016 m²
The permittivity of free space (ε₀) is a constant value of approximately 8.85 x 10^-12 F/m.
Now, let's calculate the capacitance (C):
C = (8.85 x 10⁻¹² F/m) * (0.0016 m² / 0.0005 m)
C ≈ 2.83 x 10⁻⁹ F
Therefore, the system's capacitance is approximately 2.83 nanofarads (nF).
To find the charge on the positive electrode, we can use the formula:
Q = C × V
where:
Q = charge
C = capacitance
V = voltage
Substituting in the values, we get:
Q = (2.83 x 10⁻⁹ F) × (200 V)
Q ≈ 5.66 x 10⁻⁷ C
Therefore, the charge on the positive electrode is approximately 5.66 micro coulombs (μC).
To learn more about capacitance, refer to:
https://brainly.com/question/27393410
#SPJ4
What would be the frequency of the pressure wave in a 20.8 cm long tube? X The speed of sound is 334 m/s. Express your answer in Hz
The frequency of the pressure wave in a 20.8 cm long tube is 803.8 Hz (Hertz).
The frequency can be calculated using the formula : f = v/λ
where f is the frequency, v is the speed of sound, and λ is the wavelength.
To find the wavelength, we can use the formula : λ = 2L where L is the length of the tube.
Substituting the given values :
λ = 2(20.8 cm) = 41.6 cm = 0.416 m
Now, substituting the values of v and λ in the first equation : f = v/λ
f = 334 m/s ÷ 0.416 m = 803.8 Hz
Therefore, the frequency of the pressure wave in a 20.8 cm long tube is 803.8 Hz (Hertz).
To learn more about frequency :
https://brainly.com/question/254161
#SPJ11
A proton (q=+e, m-u), a deuteron (q=+e, m-2u), and an alpha particle (q m-4u) all having the same kinetic energy enter a region of uniform magnetic field of them are moving perpendicular to the magnetic field, what is the ratio of: a) the radius ra of the deuteron path to the radius rp of the proton path and b) the radius ra of the alpha particle path to rp?
a)The ratio of the radius of the deuteron path to the radius of the proton path is 2:1. b) the ratio of the radius of the alpha particle path to the radius of the proton path is also 2:1. The radius of the circular path followed by a charged particle in a uniform magnetic field can be determined using the equation: r = (m * v) / (q * B).
where: r is the radius of the path, m is the mass of the particle,v is the velocity of the particle, q is the charge of the particle, B is the magnetic field strength.In this case, we have three particles: a proton, a deuteron, and an alpha particle. The kinetic energy of each particle is the same, but their masses and charges differ. Let's denote the radius of the deuteron path as rd, the radius of the proton path as rp, and the radius of the alpha particle path as ra.
a) Ratio of the radius of the deuteron path to the radius of the proton path (rd/rp): To find this ratio, we need to compare the mass and charge values for the deuteron and proton:
- Deuteron (D): q = +e, m = 2u
- Proton (P): q = +e, m = u
Using the equation for the radius of the path, we can calculate the ratio:
(rd/rp) = ((m_D * v) / (q_D * B)) / ((m_P * v) / (q_P * B))
(rd/rp) = (2u * v) / (u * v)
(rd/rp) = 2/1
(rd/rp) = 2
Therefore, the ratio of the radius of the deuteron path to the radius of the proton path is 2:1.
b) Ratio of the radius of the alpha particle path to the radius of the proton path (ra/rp):
To find this ratio, we compare the mass and charge values for the alpha particle and proton:
- Alpha particle (α): q = +2e, m = 4u
- Proton (P): q = +e, m = u
Using the equation for the radius of the path, we can calculate the ratio:
(ra/rp) = ((m_α * v) / (q_α * B)) / ((m_P * v) / (q_P * B))
(ra/rp) = (4u * v) / (u * 2v)
(ra/rp) = 4/2
(ra/rp) = 2
Therefore, the ratio of the radius of the alpha particle path to the radius of the proton path is also 2:1.
In conclusion:
a) The ratio of the radius of the deuteron path to the radius of the proton path is 2:1.
b) The ratio of the radius of the alpha particle path to the radius of the proton path is also 2:1.
To know more about Deuteron visit-
brainly.com/question/29981723
#SPJ11
On a day when the speed of sound is 345 m/s, the fundamental frequency of a particular stopped organ pipe is 220 Hz. The second overtone of this pipe has the same wavelength as the third harmonic of an open pipe. How long is the open pipe? Express your answer in mm
The length of the open pipe can be determined by comparing the wavelength of the third harmonic of the open pipe to the second overtone of the stopped organ pipe.
The fundamental frequency of a stopped organ pipe is determined by the length of the pipe, while the frequency of a harmonic in an open pipe is determined by the length and speed of sound. In this case, the fundamental frequency of the stopped organ pipe is given as 220 Hz.
The second overtone of the stopped organ pipe is the third harmonic, which has a frequency that is three times the fundamental frequency, resulting in 660 Hz (220 Hz × 3). The wavelength of this second overtone can be calculated by dividing the speed of sound by its frequency: wavelength = speed of sound / frequency = 345 m/s / 660 Hz = 0.5227 meters.
Now, we need to find the length of the open pipe that produces the same wavelength as the third harmonic of the stopped organ pipe. Since the open pipe has a fundamental frequency that corresponds to its first harmonic, the wavelength of the third harmonic in the open pipe is four times the length of the pipe. Therefore, the length of the open pipe can be calculated by multiplying the wavelength by a factor of 1/4: length = (0.5227 meters) / 4 = 0.1307 meters.
Finally, to express the length in millimeters, we convert the length from meters to millimeters by multiplying it by 1000: length = 0.1307 meters × 1000 = 130.7 mm. Hence, the length of the open pipe is 130.7 mm.
To learn more about wavelength.
Click here:brainly.com/question/29548846
#SPJ11
The compound eyes of bees and other insects are highly sensitive to light in the ultraviolet portion of the spectrum, particularly light with a frequency between 7.3 x 1014 Hz and 0.93 x 1015 Hz. To what wavelengths do these frequencies correspond? The lower wavelength is The upper wavelength is m. m.
The lower wavelength can be calculated by dividing the speed of light (approximately 3 x 10^8 meters per second) by the lower frequency value, yielding a wavelength of approximately 4.11 x 10^-7 meters or 411 nanometers (nm). Similarly, the upper wavelength can be obtained which will be a wavelength of approximately 3.22 x 10^-7 meters or 322 nm.
In the ultraviolet portion of the electromagnetic spectrum, shorter wavelengths correspond to higher frequencies. The lower frequency given, 7.3 x 10^14 Hz, corresponds to a longer wavelength of approximately 411 nm. This falls within the range of UV-A radiation, which has wavelengths between 315 and 400 nm. On the other hand, the higher frequency given, 0.93 x 10^15 Hz, corresponds to a shorter wavelength of approximately 322 nm. This falls within the range of UV-B radiation, which has wavelengths between 280 and 315 nm. Bees and other insects with compound eyes have evolved to be sensitive to these ultraviolet wavelengths, allowing them to perceive details and patterns that are invisible to humans.
Learn more about wavelength here:
brainly.com/question/32900586
#SPJ11
In a series circuit, several components are placed, including; a resistor with R= 5.0 , Pure inductor with L = 0.20-H, and capacitor with C = 40μF. This series in connect to a power supply (30V, 1600 Hz).
a. Illustrate a picture with the correct component symbols, and calculate:
b. Current in the circuit
c. Phase angle between voltage and current
d. Power loss (power loss in the circuit, and
e. The voltage that passes through each component in the circuit when measured
using a voltmeter.
(a) The correct component symbols for a series circuit are: resistor (zigzag line), inductor (coil or loops), capacitor (parallel lines with a space), and power supply (long line with plus/minus sign).
(b) The current in the circuit can be calculated by dividing the voltage by the total impedance (sum of resistive and reactive components).
(c) The phase angle between voltage and current depends on the relationship between inductive and capacitive reactances.
(d) Power loss can be determined by calculating the real power dissipated in the resistor (current squared times resistance).
(e) To measure voltage across each component, use a voltmeter connected in parallel to each component separately. Ensure the circuit is not powered during measurements.
a. Component symbols: Here is a diagram illustrating the correct component symbols for the given series circuit configuration:
[Insert a diagram showing the series circuit with resistor, inductor, capacitor, and power supply symbols]
b. Current in the circuit: To calculate the current in the circuit, we can use Ohm's Law and the concept of impedance. The total impedance (Z) of the circuit can be calculated as the sum of the resistive (R) and reactive (XL - XC) components. Then, the current (I) can be found by dividing the voltage (V) by the impedance (Z).
c. Phase angle between voltage and current: The phase angle (φ) between the voltage and current in the circuit can be determined by comparing the phase shifts caused by the inductive (XL) and capacitive (XC) elements. If XL > XC, the circuit is inductive, resulting in a positive phase angle. Conversely, if XC > XL, the circuit is capacitive, resulting in a negative phase angle. The phase angle can be calculated using trigonometric functions based on the values of XL, XC, and the total impedance (Z).
d. Power loss: The power loss in the circuit can be determined by calculating the real power (P) dissipated in the resistor. The real power can be obtained by multiplying the current (I) squared by the resistance (R). This represents the energy converted into heat or other non-useful forms within the resistor.
e. Voltage across each component: To measure the voltage across each component, a voltmeter can be connected in parallel to each component separately. The voltmeter will display the voltage drop across that particular component, allowing you to measure the voltage across the resistor, inductor, and capacitor individually. Ensure that the circuit is not powered during these measurements to avoid potential damage to the voltmeter.
learn more about "voltage ":- https://brainly.com/question/1176850
#SPJ11
13 Part 2 of 2 166 points eBook Hint Print References Required information A 1.90-kg block is released from rest and allowed to slide down a frictionless surface and into a spring. The far end of the spring is attached to a wall, as shown. The initial height of the block is 0.500 m above the lowest part of the slide and the spring constant is 438 N/m. The spring sends the block back to the left. How high does the block rise?
The block will rise to a height of 0.250 m.
When the block slides down the frictionless surface and compresses the spring, it stores potential energy in the spring. This potential energy is then converted into kinetic energy as the block is pushed back to the left by the spring. The conservation of mechanical energy allows us to determine the height the block will rise to.
Initially, the block has gravitational potential energy given by mgh, where m is the mass of the block, g is the acceleration due to gravity, and h is the initial height of the block. As the block slides down and compresses the spring, this potential energy is converted into potential energy stored in the spring, given by (1/2)kx^2, where k is the spring constant and x is the compression of the spring.
Since energy is conserved, we can equate the initial gravitational potential energy to the potential energy stored in the spring:
mgh = (1/2)kx^2
Solving for x, the compression of the spring, we get:
x = √((2mgh)/k)
Plugging in the given values, with m = 1.90 kg, g = 9.8 m/s^2, h = 0.500 m, and k = 438 N/m, we can calculate the value of x. This represents the maximum compression of the spring.
To find the height the block rises, we need to consider that the block will reach its highest point when the spring is fully extended again. At this point, the potential energy stored in the spring is converted back into gravitational potential energy.
Using the same conservation of energy principle, we can equate the potential energy stored in the spring (at maximum extension) to the gravitational potential energy at the highest point:
(1/2)kx^2 = mgh'
Solving for h', the height the block rises, we get:
h' = (1/2)((kx^2)/mg)
Plugging in the values of x and the given parameters, we find that the block will rise to a height of 0.250 m.
Learn more about height
brainly.com/question/29131380
#SPJ11
Many snakes are only able to sense light with wavelengths less than 10 µm. Let's assume a snake is outside during a cold snap. If your coat was the same as the 8°F air temperature, would your coat be radiating sufficient light energy for the snake to see it? If you took off the coat and exposed 75°F clothing, would the snake see your clothing? The relationship between Kelvin temperature and Fahrenheit temperature is T(K)-5/9*(T+459.67).
The snake is unable to sense light beyond 10 µm, the coat will not be detected by the snake. The snake can see the clothing.
Many snakes can only sense light with wavelengths less than 10 µm. Assuming a snake is outside during a cold snap and a person wearing a coat with the same temperature as the 8°F air temperature, would the coat radiate enough light energy for the snake to see it? And, if the coat is taken off and 75°F clothing is exposed, would the snake be able to see it?The light that is sensed by snakes falls in the far-infrared to mid-infrared region of the electromagnetic spectrum.
If we consider the Wein's displacement law, we can observe that the radiation emitted by a body will peak at a wavelength that is inversely proportional to its temperature. For a body at 8°F, the peak wavelength falls in the far-infrared region. If a person is wearing a coat at 8°F, it is highly unlikely that the coat will radiate sufficient energy for the snake to see it since the radiation is primarily emitted in the far-infrared region. Since the snake is unable to sense light beyond 10 µm, the coat will not be detected by the snake.
When the coat is taken off and 75°F clothing is exposed, the clothing will radiate energy in the mid-infrared region since the peak wavelength will be higher due to the increase in temperature. Even though the peak wavelength is in the mid-infrared region, the snake can detect it since the clothing will be radiating energy with wavelengths less than 10 µm.
To know more about light energy visit :
https://brainly.com/question/32493476
#SPJ11
You may want to review (Page). Figure 3 V www R < 1 of 1 6 V Part A What is the magnitude of the current in the 39 resistor in (Figure 1)? Express your answer with the appropriate units. HA ? I = Value Units Submit Request Answer Part B What is the direction of the current in the 39 2 resistor in (Figure 1)? O from left to right through the resistor O from right to left through the resistor
The magnitude of the current in the 39 Ω resistor in Figure 1 is 0.51 A (from left to right or from right to left).
To determine the magnitude of the current in the 39 Ω resistor in Figure 1, we can apply Ohm's law, which states that the current (I) flowing through a resistor is equal to the voltage (V) across the resistor divided by its resistance (R). Given that the voltage across the 39 Ω resistor is not explicitly provided in the question, we need to gather additional information from Figure 1 or the context. Unfortunately, the given information seems incomplete, as references to page numbers, figures, and resistors are not clear. To solve the problem accurately, it is important to provide the necessary context or clarify the figure and resistor mentioned in the question. This will allow for a precise calculation of the current magnitude in the 39 Ω resistor. Regarding the direction of the current in the 39 Ω resistor, without the complete information or a clear reference to the figure, it is not possible to determine the direction of the current (from left to right or from right to left). Further details or clarification are needed to provide an accurate answer.
To learn more about current , click here : https://brainly.com/question/23323183
#SPJ11
a.) Imagine water is in glass, as in a fish tank. What would be the critical angle at this interface? Where must the light start?
b.) Light is incident on flabium at zero degrees. If flabium has an index of 1.4, what will the refracted angle be?
c.) Flabium can cause dispersion of colors by refraction. How is this possible?
a) The critical angle is the angle of incidence where the angle of refraction is equal to 90 degrees. When light enters from glass to water, the critical angle is 48.8 degrees. The light must start at the point where it touches the water's surface.
In physics, the critical angle is defined as the smallest angle of incidence at which light is entirely reflected, and no portion of it penetrates the boundary separating two media. For water in a glass, the critical angle at the interface is 48.8 degrees. In general, the critical angle depends on the refractive index of the material in the medium through which the light is passing. Water has a refractive index of 1.33, while glass has a refractive index of 1.5, which is why the critical angle at the water-glass interface is 48.8 degrees.
For a glass of water, the critical angle at the interface is 48.8 degrees, and the light must start at the point where it touches the water's surface.
b) When light enters flabium at zero degrees and has an index of 1.4, the refracted angle will also be zero degrees.
When light passes through a boundary between two media, it bends, or refracts, from its original path. The amount of refraction depends on the angle of incidence and the refractive indices of the two media. When light enters flabium at zero degrees, which is perpendicular to the boundary, the angle of refraction will also be zero degrees because the angle of incidence is equal to the angle of refraction. The refractive index of flabium, which is 1.4, has no effect on the refracted angle because the angle of incidence is zero degrees.
When light enters flabium at zero degrees, which is perpendicular to the boundary, the angle of refraction will also be zero degrees, regardless of the refractive index of flabium.
c) Flabium can cause dispersion of colors by refraction because different wavelengths of light bend by different amounts as they pass through the material.
Flabium, like other materials, can cause dispersion of colors by refraction. When white light enters flabium at an angle, it is separated into its component colors, each of which is bent by a different amount as it passes through the material. The amount of bending, or refraction, depends on the refractive index of the material and the wavelength of the light. The shorter the wavelength of the light, the greater the refraction, resulting in more bending of blue and violet light than red light. As a result, the colors are dispersed, causing a rainbow-like effect. This is why flabium can cause the dispersion of colors by refraction.
Flabium can cause the dispersion of colors by refraction because different wavelengths of light bend by different amounts as they pass through the material, resulting in a rainbow-like effect.
To know more about critical angle, visit:
https://brainly.com/question/9896008
#SPJ11
A drill is initially rotating at a rate of 60.0 rad/s. The
drill accelerates at a rate of 0.25 rad/s^2.
Determine its angular speed after 20.0 seconds.
The angular speed of the drill after 20.0 seconds is 65.0 rad/s.
To determine the final angular speed of the drill, we can use the following kinematic equation:
Final Angular Speed = Initial Angular Speed + (Angular Acceleration * Time)
Given that the initial angular speed is 60.0 rad/s and the angular acceleration is 0.25 rad/s^2, we can substitute these values into the equation along with the given time of 20.0 seconds:
Final Angular Speed = 60.0 rad/s + (0.25 rad/s^2 * 20.0 s)
Final Angular Speed = 60.0 rad/s + 5.0 rad/s
Final Angular Speed = 65.0 rad/s
Therefore, the angular speed of the drill after 20.0 seconds is 65.0 rad/s.
To learn more about angular speed, click here: https://brainly.com/question/29058152
#SPJ11
Convex lens or concave lens? Along with the reason. Part B Below is a list of some applications of lenses. Determine which lens could be used in each and explain why it would work. You can conduct online research to help you in this activity, if you wish. B I V x2 X2 10pt :: EE 를 드 田 フ Applications Lens Used Reason peephole in a door objective lens (front lens) of binoculars photodiode - In a garage door or burglar alarm, it can sense the light (or the lack of it) from an LED light source positioned some distance away. magnifying glass viewfinder of a simple camera Characters used: 300 / 15000Convex lens or concave lens? Along with the reason.
Convex lenses are used for applications that require converging light rays to create magnified and real images, while concave lenses are used for applications that require diverging light rays to control light intensity or provide a wider field of view.
Convex lens:
Peephole in a door: A convex lens is used as a peephole in a door to provide a wider field of view. The convex shape of the lens helps in magnifying the image and bringing it closer to the viewer's eye, making it easier to see who is at the door.
Objective lens (front lens) of binoculars: Binoculars use a pair of convex lenses as the objective lens, which gathers light from a distant object and forms a real and inverted image. The convex lens converges the incoming light rays, allowing the viewer to observe the magnified image of the object.
Magnifying glass: A magnifying glass consists of a convex lens that is used to magnify small objects or text. The curved shape of the lens converges the light rays, producing a larger virtual image that appears magnified to the viewer.
Concave lens:
Photodiode: A concave lens can be used in a photodiode setup where it senses the light (or the lack of it) from an LED light source positioned some distance away. A concave lens diverges the incoming light rays, spreading them out and reducing their intensity. This property of a concave lens can be used to control the amount of light falling on the photodiode, enabling it to detect changes in light intensity.
Viewfinder of a simple camera: A concave lens can be used in the viewfinder of a camera to help the photographer compose the image. The concave lens diverges the light rays from the scene, allowing the photographer to see a wider field of view. This helps in framing the shot and ensuring that the desired elements are captured within the frame.
In summary, convex lenses are used for applications that require converging light rays to create magnified and real images, while concave lenses are used for applications that require diverging light rays to control light intensity or provide a wider field of view.
(Convex lens or concave lens? Along with the reason. Part B Below is a list of some applications of lenses. Determine which lens could be used in each and explain why it would work. You can conduct online research to help you in this activity, if you wish. B 1 z X X2 10pt - v. E v Applications Lens Used Reason peephole in a door objective lens (front lens) of binoculars photodiode-In a garage door or burglar alarm, it can sense the light (or the lack of it) from an LED light source positioned some distance away. magnifying glass viewfinder of a simple camera Characters used:300/15000)
learn more about light
https://brainly.com/question/2790279
#SPJ11
A rabbit is moving in the positive x-direction at 2.70 m/s when it spots a predator and accelerates to a velocity of 13.3 m/s along the positive y-axis, all in 1.60 s. Determine the x-component and the y-component of the rabbit's acceleration. (Enter your answers in m/s2. Indicate the direction with the signs of your answers.)
The x-component of the rabbit's acceleration is 1.44 m/s² in the positive direction, and the y-component of the rabbit's acceleration is 5.81 m/s² in the positive direction.
acceleration = (final velocity - initial velocity) / time. The initial velocity in the x-direction is 2.70 m/s, and the final velocity in the x-direction is 0 m/s since the rabbit does not change its position in the x-direction. The time taken is 1.60 s. Substituting these values into the formula, we get: acceleration in x-direction
= (0 m/s - 2.70 m/s) / 1.60 s
= -1.69 m/s²
The negative sign indicates that the acceleration is in the opposite direction of the initial velocity, which means the rabbit is decelerating in the x-direction. we take the absolute value:|x-component of acceleration| = |-1.69 m/s²| = 1.69 m/s²Therefore, the x-component of the rabbit's acceleration is 1.69 m/s² in the positive direction.
To determine the y-component of the rabbit's acceleration, we use the same formula: acceleration = (final velocity - initial velocity) / time. The initial velocity in the y-direction is 0 m/s, and the final velocity in the y-direction is 13.3 m/s. The time taken is 1.60 s. Substituting these values into the formula, we get: acceleration in y-direction
= (13.3 m/s - 0 m/s) / 1.60 s
= 8.31 m/s²
Therefore, the y-component of the rabbit's acceleration is 8.31 m/s² in the positive direction. The x-component of the rabbit's acceleration is 1.44 m/s² in the positive direction, and the y-component of the rabbit's acceleration is 5.81 m/s² in the positive direction.
Learn more about acceleration click here:
brainly.com/question/2303856
#SPJ11
What is the minimum energy needed to change the speed of a 1600-kg sport utility vehicle from 15.0 m/s to 40.0 m/s? © 1.10 MJ O 20.0 kJ 40,0 kJ © 0.960 M)
The minimum energy needed to change the speed of a 1600-kg sport utility vehicle from 15.0 m/s to 40.0 m/s is 1.10 MJ (megajoules).
To calculate the minimum energy required, we can use the kinetic energy formula: KE = (1/2)mv^2, where KE is the kinetic energy, m is the mass, and v is the velocity.
Initially, the kinetic energy of the vehicle is (1/2)(1600 kg)(15.0 m/s)^2 = 180,000 J.
When the speed is increased to 40.0 m/s, the kinetic energy becomes (1/2)(1600 kg)(40.0 m/s)^2 = 1,280,000 J.
The difference between these two kinetic energies is the energy needed to change the speed, which is 1,280,000 J - 180,000 J = 1,100,000 J = 1.10 MJ.
Therefore, the minimum energy required to change the speed of the SUV from 15.0 m/s to 40.0 m/s is 1.10 MJ.
To learn more about energy click here brainly.com/question/1932868
#SPJ11
Imagine that a new asteroid is discovered in the solar system with a circular orbit and an orbital period of 8 years. What is the average distance of this object from the Sun in Earth units? Between which planets would this new asteroid be located? 1. Mars and Earth 2. Mars and Jupiter 3. Jupiter and Pluto
The answer is 2. Mars and Jupiter.
The asteroid would be located between Mars and Jupiter. The average distance of this object from the Sun in Earth units is 2.5 AU, which is the distance between Mars and Jupiter.
AU = Astronomical Unit
Here's a table showing the average distance of the planets from the Sun in Earth units:
Planet | Average Distance from Sun (AU)
Mercury | 0.387
Venus | 0.723
Earth | 1.000
Mars | 1.524
Jupiter | 5.203
Saturn | 9.546
Uranus | 19.218
Neptune | 30.069
Pluto | 39.482
As you can see, the asteroid's average distance from the Sun is between that of Mars and Jupiter. This means that it would be located in the asteroid belt, which is a region of space between Mars and Jupiter that is home to millions of asteroids.
The answer is 2. Mars and Jupiter.
Learn more about mars with the given link;
https://brainly.com/question/644043
#SPJ11