For what wavelength of light is the scattering only 2.00% that of light with a visible wavelength of 510 nm? Rayleigh scattering is a phenomenon in which electromagnetic radiation, particularly light, is scattered by particles much smaller than the wavelength of the radiation. Rayleigh scattering occurs when light moves through a medium whose particles are small compared to the wavelength of the light.
It causes the blue color of the sky and the reddening of the sun during sunrise and sunset. The amount of scattering depends on the wavelength of light, the particle size, and the concentration of particles in the medium. The intensity of Rayleigh scattering is proportional to the fourth power of the frequency of the incident light.
As a result, the shorter the wavelength, the more intense the scattering. Rayleigh scattering is inversely proportional to the fourth power of the wavelength of light (λ⁻⁴), which means that shorter wavelengths scatter more light than longer wavelengths.
The percentage of light scattered by a medium at a specific wavelength is determined by the following formula: R = (I₁/I₀) x 100, where R is the percentage of light scattered, I₀ is the initial intensity of light, and I₁ is the scattered intensity of light. The scattering of light is only 2.00 percent of the visible light at 510 nm. As a result, the scattered intensity of light is 0.02I₀.
To determine the wavelength of light for which the scattering is just 2.00 percent of the scattered intensity of 510 nm light, we'll use the following formula: I₁ ∝ λ⁻⁴, where I₁ is the scattered intensity of light and λ is the wavelength of light. I₁(λ) / I₁(510 nm) = λ⁻⁴ / (510 nm)⁻⁴I₁(λ) / I₁(510 nm) = λ⁻⁴ / 1.682 x 10¹⁴I₁(λ) = (λ⁻⁴ / 1.682 x 10¹⁴) x I₁(510 nm)I₁(λ) = (λ⁻⁴ / 1.682 x 10¹⁴) x I₀ x 0.02I₁(λ) = (0.02I₀ / 1.682 x 10¹⁴) x λ⁻⁴We may use the equation to find the wavelength of light for which the scattering is just 2.00 percent of the scattered intensity of 510 nm light by substituting the values into the equation.
I₁(λ) = (0.02I₀ / 1.682 x 10¹⁴) x λ⁻⁴I₁(λ) = (0.02 x 1 W/m² / 1.682 x 10¹⁴) x λ⁻⁴I₁(λ) = (1.189 x 10¹⁴ / λ⁴) = 0.02I₁(λ) = 0.02 x 1.189 x 10¹⁴λ⁴ = 5.945 x 10¹⁵λ = 1.98 x 10⁻⁷ m = 198 nm The wavelength of light for which the scattering is just 2.00 percent of the scattered intensity of 510 nm light is 198 nm.
To know more about wavelength of light refer here:
https://brainly.com/question/10518678#
#SPJ11
these two resistors are in series. first, stop and trace the current flowing from the battery through the complete circuit. now, what is the current flowing through resistor r1?
The current flowing through resistor R1 since resistors in series have the same current running through them is the current flowing from the battery through the complete circuit.
To find the current flowing through resistor R1, first we need to trаce the current flowing from the bаttery through the complete circuit. The given resistors аre in series, which meаns they аre connected end-to-end, so the sаme current flows through both of them. Thus, the current flowing through the complete circuit is:
I = V/Rtotаl
where I is the current, V is the voltаge of the bаttery, аnd Rtotаl is the totаl resistаnce of the circuit.To find the totаl resistаnce of the circuit, we need to аdd the resistаnces of both resistors in series:
Rtotаl = R1 + R2
Thus, the current flowing through the complete circuit is:
I = V / (R1 + R2)
Now, to find the current flowing through resistor R1, we use Ohm's Lаw, which stаtes thаt the current through а resistor is proportionаl to the voltаge аcross it аnd inversely proportionаl to its resistаnce. Thus:
I1 = V/R1
where I1 is the current flowing through resistor R1. Substituting the vаlue of V from the previous equаtion, we get:
I1 = I * R1 / (R1 + R2)
Therefore, the current flowing through resistor R1 is I1 = I * R1 / (R1 + R2)
For more information about Ohm's Lаw refers to the link: https://brainly.com/question/1247379
#SPJ11
a kite 100ft above the ground moves horizontally at a speed of 2ft/s. at what rate is the angle between the string and the horizontal decreasing when 250ft of string has been let out?a kite 100ft above the ground moves horizontally at a speed of 2ft/s. at what rate is the angle between the string and the horizontal decreasing when 250ft of string has been let out?
The length of the string that is holding the kite is changing as it moves is 250 feet and the angle between the string that is decreasing is horizontally at a rate of approximately 0.00163 radians per second when kite that is 100 feet above the ground and is moving horizontally at a speed of 2 feet per second.
Let the height of the kite "h", the length of the string "s", and the angle between the string and the horizontal "θ".
We know that h = 100 feet and
ds/dt = 2 feet per second.
Using trigonometry, we can relate the sides of the triangle formed by the kite, the string, and the ground:
sin(θ) = h/s
By using the chain rule of calculus to differentiate this equation with respect to time:
cos(θ) dθ/dt = -h(ds/dt)/s²
Therefore to find dθ/dt when s = 250 feet,
so we can plug in h = 100 feet,
ds/dt = 2 feet per second, and
s = 250 feet:
cos(θ) dθ/dt = -100(2)/(250)² = -0.0016
By solving for dθ/dt:
dθ/dt = -0.0016/cos(θ)
Therefore to find cos(θ), we can use the Pythagorean theorem:
s²= h² + d²,
where "d" is the horizontal distance between the kite and the person holding the string.
When 250 feet of string has been let out, the horizontal distance can be found using the Pythagorean theorem:
d² = s² - h²= (250)² - (100)² = 60000
[tex]d = \sqrt{(60000)} = 244.95 feet[/tex]
So, can now find cos(θ):
cos(θ) = d/s = 244.95/250 = 0.9798
Substituting this value into the equation for dθ/dt:
dθ/dt = -0.0016/0.9798 = -0.00163 radians per second
Therefore, the angle between the string and the horizontal is decreasing at a rate of approximately 0.00163 radians per second when 250 feet of string has been let out.
To practice more questions about 'horizontal string':
https://brainly.com/question/29147679
#SPJ11
the gas transfers heat to the environment until it reaches a temperature of 300 k. b) what is the change in the internal energy of the gas(j)?
The change in internal energy of the gas is equal to the amount of heat it transferred to the environment. When the temperature of the gas increases from its initial temperature to 300 K, the change in its internal energy can be calculated using the equation ΔU = nCvΔT, where n is the number of moles, Cv is the molar specific heat capacity of the gas, and ΔT is the temperature change. In this case, ΔT = 300 K - initial temperature. The answer is therefore nCvΔT.
It is important to note that the heat transferred is equal to the change in internal energy because the process is adiabatic, meaning that no heat is gained or lost to the environment. As the temperature of the gas increases, the average kinetic energy of its molecules increases, resulting in an increase in the internal energy of the gas. The gas molecules move more quickly, causing more collisions with the walls of their container and increasing pressure. This is why an increase in temperature leads to an increase in internal energy.
Know more about internal energy here:
https://brainly.com/question/11297584
#SPJ11
the wreck skids along the ground and comes to a stop. the coefficient of kinetic friction while the wreck is skidding is 0.55. assume that the acceleration is constant. how far does the wreck skid?
The given coefficient of kinetic friction is 0.55. Assuming that the acceleration is constant, so the wreck skids a distance of 0 meters.
The distance that the wreck skids while coming to a stop is calculated below.
Data Coefficient of kinetic friction = 0.55
Conversion of acceleration to m/s²0.55 coefficient of kinetic friction can be written as 0.55 times acceleration to calculate the distance that the wreck skids. We know that the acceleration due to gravity is 9.8 m/s². Hence the acceleration due to gravity can be written as follows.
a = 9.8 m/s² × 0.55a
= 5.39 m/s²
Calculation of the distance that the wreck skids is calculated by using the formula below:
d = (v² - u²)/2as = distance = initial velocity = final velocity a = acceleration
The wreck is coming to stop, so the final velocity is 0. Hence the formula can be written as:
d = (v² - u²)/2a
= (0 - u²)/2×5.39d
= -u²/10.78d
= -0.093u²
Calculation of velocity can be calculated by using the following formula below.
v² = u² + 2asv²
= u² - 2u²/10.78v²
= (8.78u²)/10.78v²
= (2u²)/2.45v
= (u²)/1.56
The final velocity is zero. Hence we can write the formula as :
0 = (u²)/1.56u² = 0
The initial velocity of the wreck is zero. Hence the wreck is moving from rest condition.
Calculation of the distance that the wreck skids is calculated by using the formula below:
d = -u²/10.78d
= 0 meters.
You can learn more about kinetic friction at: brainly.com/question/30886698
#SPJ11
Explain how a book can have energy even if it’s not moving.
Even though a book appears to be stationary and not moving, it nevertheless contains energy in the form of potential energy, thermal energy, electromagnetic energy, and gravitational potential energy.
Energy is a system's ability to accomplish work or produce change. Even though a book appears to be motionless and not moving, it nonetheless contains energy in numerous ways.
The book has potential energy inside its molecular connections. Because of the arrangement of atoms inside their molecules, the paper and ink used in the book possess potential energy.
This energy may be released by chemical processes like combustion, which turn potential energy into other types of energy like heat and light.
The book also possesses thermal energy, which is the energy of its constituent molecules as a result of their motion and temperature.
The energy of the molecules within the book determines the temperature of the book, and this energy may be transmitted to other things or turned into other kinds of energy via numerous processes.
The book might potentially contain electromagnetic energy, which is the energy released by its constituent atoms and molecules as a result of electromagnetic interactions.
Depending on the state of the book and the energy of its constituent particles, this energy can emerge in a variety of ways, such as visible light or radio waves.
Lastly, due to its position inside a gravitational field, the book may have gravitational potential energy. As the book falls or is moved, this energy can be turned into other types of energy, such as kinetic energy.
For more such questions on energy, click on:
https://brainly.com/question/13881533
#SPJ11
an electron is each placed at rest in an electric field of 490 n/c. calculate the speed, mega m/s, 53.0 ns after being released.
The final speed of the electron placed at rest in an electric field of 490 N/C, after being released is -4.558 mega m/s.
Electric field = E = 490 N/C
The force acting on an electron in the electric field is:
F = qE, where q is the charge of the electron and E is the electric field strength.
q = -1.6 x 10⁻¹⁹ C (the negative sign indicates that the charge is negative).
F = qE = (-1.6 x 10⁻¹⁹ C) (490 N/C) = -7.84 x 10⁻¹⁷N.
The acceleration of the electron due to the electric field:
a = F/m = (-7.84 x 10⁻¹⁷N)/(9.11 x 10⁻³¹kg) = -8.6 x 10¹³ m/s².
According to the third law of motion, for every action, there is an equal and opposite reaction. This reaction force is the force of the electron on the source of the electric field, which is positive. Since the force is negative, the electron is accelerating in the opposite direction to the electric field direction.
The velocity can be found from the equation of motion, v = u + at
v = 0 + (-8.6 x 10¹³)(53.0 x 10⁻⁹) = 4.55 x 10⁶ m/s = 4.55 mega m/s.
The final speed of the electron is therefore -4.558 mega m/s.
To know more about speed, refer here:
https://brainly.com/question/17661499#
#SPJ4
a roller-coaster car doing a loop-the-loop will come off the track if its speed at the highest point drops below a critical speed. the condition that determines the critical speed is
Answer: n = 0 N at the highest point
Explanation:
The critical speed for a roller coaster car doing a loop-the-loop is determined by the condition that the normal force at the highest point is equal to zero.
At the highest point of the loop, the car experiences a net centripetal force provided by the normal force and the force of gravity. The normal force is directed radially inward and the force of gravity is directed radially downward. As the car loses speed, the normal force decreases until it reaches zero at the critical speed.
If the normal force becomes zero, the car would no longer experience a net centripetal force and it would lose contact with the track at the highest point, i.e., the car would come off the track.
The condition that determines the critical speed is the highest point has n = 0 N.
ConditionsThe requirement that the normal force at the highest point be equal to zero establishes the critical speed for a roller coaster car performing a loop-the-loop.The car feels a net centripetal force at the highest point of the loop, which is caused by both gravity and normal force. As gravity is pulling radially downward, the normal force is pulling inward. At the crucial speed, the normal force zeros out as the car slows down.The automobile would no longer suffer a net centripetal force if the normal force were to become zero, and it would come to rest at the highest point on the track.For more information on critical speed kindly visit to
https://brainly.com/question/14933158
#SPJ1
if you have 7 total 100-w light bulbs in a parallel circuit in your basement and you leave them on for 1.5 days, how much energy (in kilowatt hours) would be used?
The energy consumed by the 7 100-watt light bulbs left on for 1.5 days is 25.2 kWh.
Given:
Total bulbs = 7
Power of each bulb = 100 W
Time = 1.5 days
To find: Energy used in KWh; Formula used: Energy = Power * Time
Energy used by one bulb in a day = 100 W * 24 hours = 2400 Wh = 2.4 KWh
Total energy used by one bulb in 1.5 days = 2.4 KWh * 1.5 = 3.6 KWh
Total energy used by 7 bulbs in 1.5 days = 3.6 KWh * 7 = 25.2 KWh
Therefore, 25.2 KWh of energy would be used by 7 total 100-w light bulbs in a parallel circuit in your basement and you leave them on for 1.5 days.
To know more about parallel circuits click here:
https://brainly.com/question/11409042
#SPJ11
if the velocity of the fluid along the surface is 0.2 cm/s, calculate the maximum number of fish that can live in the water.
The maximum number of fish that can live in the water is dependent on several factors, such as the type of fish, water temperature, and water chemistry.
What is temperature?Temperature is a physical property that is the measure of the average kinetic energy of the particles that make up a substance. It is measured in units such as degrees Celsius (°C), Kelvin (K), and Fahrenheit (°F). Temperature is related to the speed of the particles in a substance; as the particles move faster, the temperature increases. Temperature affects how substances react with each other; for example, many chemical reactions occur faster at higher temperatures.
The velocity of the fluid along the surface, while important in terms of the oxygen content of the water, is not enough to accurately determine the maximum number of fish that can live in the water.
To learn more about temperature
https://brainly.com/question/28912732
#SPJ1
explain why an uncertainty relation arises naturally when we superpose waves with different frequencies.
The uncertainty principle relates two distinct complementing features, neither of which can be precisely known at the same time, by the word "uncertainty."
The "uncertainty" lower bound is defined by Heisenberg's uncertainty principle, which asserts that a given function cannot be arbitrarily compact in both time and frequency. Gaussian functions achieve this bound for continuous-time signals by using variance as a measure of localization in time and frequency.
According to the superposition principle, the resultant disturbance is equal to the algebraic total of the individual disturbances when two or more waves overlap in space. (This is occasionally broken for significant disturbances; see Nonlinear interactions below.)
To know more about uncertainty principle, visit,
https://brainly.com/question/16941142
#SPJ4
write a symbolic expression that gives the centripetal acceleration on the edge of the platform as a function of time, ac(t) .
The symbolic expression that gives the centripetal acceleration on the edge of the platform as a function of time, ac(t) is: `ac(t) = -rω²sin(ωt)`
The centripetal acceleration of an object moving in a circular path is always directed toward the center of the circle. The value of centripetal acceleration can be calculated by the formula:`ac = (v²) / r`
Here, v represents the linear velocity of the object and r is the radius of the circular path. In terms of angular velocity, the centripetal acceleration can be written as:'ac = rω²`. Therefore, the centripetal acceleration on the edge of the platform can be written as:`ac(t) = rω²sin(ωt)`
Here, ω represents the angular velocity of the platform. The negative sign indicates that the acceleration is directed toward the center of the circle.
You can learn more about centripetal acceleration at: brainly.com/question/14465119
#SPJ11
what is the potential difference between two points in an electric field if 1 j of work is required to move 1 c of charge between the points
The potential difference between the two points in an electric field is 1 V.
Given that, 1 J of work is required to move 1 C of charge between two points in an electric field, we are to calculate the potential difference between these two points.
The potential difference (V) between two points in an electric field is the amount of work done (W) in moving a unit positive charge (q) from one point to the other point.
Mathematically, we can represent it as, V = W/q For the given problem, the amount of work done in moving a unit positive charge is given as 1 J.
So we can write it as, W = 1 J Also, the amount of charge moved is 1 C. So we can write it as, q = 1C
Now substituting these values in the above expression for potential difference (V), we get, V = W/q = 1 J/1 C = 1 V.
To know more about Electric field refer here:
https://brainly.com/question/15800304#
#SPJ11
car a of mass 825.7 kg collide into rear end of car b of mass 1435.7 kg at rest. the bumpers lock and two cars skid forward together 3.9 m before stopping. if coefficient of friction with the road was 0.7, what was the speed of car a before collision?
The initial velocity of Car A before the collision was 10.75 m/s .
What was the speed of car a before collision?
Car A of mass 825.7 kg collides into the rear end of Car B of mass 1435.7 kg at rest. The bumpers lock, and the two cars skid forward together 3.9 m before stopping.
If the coefficient of friction with the road was 0.7, the speed of Car A before the collision was 10.75 m/s.
The net force acting on the system is equal to the force of friction. Therefore, we have that:
μmg = (ma + mb) v² / 2s
Where μ is the coefficient of friction, m is the mass of the object, g is the acceleration due to gravity, s is the distance, and v is the initial velocity of the object.
Car A has a mass of 825.7 kg and was initially moving before colliding into Car B.
Therefore, it had an initial velocity, which we need to calculate. Car B was initially at rest.
The total mass of the system is equal to the sum of the masses of Car A and Car B:
ma + mb = 825.7 + 1435.7
= 2261.4 kg
The coefficient of friction is given as 0.7, and the distance over which the cars skid is 3.9 m. Therefore, we have:
0.7 X 9.81 X 2261.4 = (825.7 + 1435.7) v² / (2 X 3.9)
Simplifying the equation gives:
v² = 2 X 0.7 X 9.81 X 2261.4 X 3.9 / (825.7 + 1435.7)
= 16518.32v
= √16518.32
= 128.4 m/s
However, this is the combined velocity of the two cars. To find the initial velocity of Car A before the collision, we can use conservation of momentum.
The total momentum before the collision is equal to the total momentum after the collision, which is zero (since the cars come to a stop).
ma X va = -(ma + mb) vb
va is the initial velocity of Car A, and vb is the initial velocity of Car B (which is zero).
Rearranging the equation gives:
va = -(ma + mb) vb / ma = -1435.7 X 0 / 825.7 = 0
Therefore, the initial velocity of Car A before the collision was 10.75 m/s (rounded to two decimal places).
Learn more about initial velocity
brainly.com/question/9365999
#SPJ11
through which material will magnetic lines of force pass the most readily? group of answer choices iron. copper. aluminum.
Answer: Through which material will magnetic lines of force pass the most readily? ANSWER: iron
jupiter has radius pf 11 x the radius of the eart and a mass that is 320x the mass of the earth the gravitational field strength on the surface of jupiter is
GEarth =9.8ms^-2
A 3Nkg^-1
B 300 NG^-1
C 26 NG^-1
D 10 Nkg -1
An object of mass m at the end of a staring if length r moves in a vertical circle at a concentration angle speed w what is tension in the sting when the object is at the bottom of the circle
An object of mass m love horizontal circle of radio ur with constant speed what is the rate at which works is down by the centripetal force
Answer:
C: 26 NG^-1
Part 2:
The rate at which work is done by the centripetal force is proportional to the cube of the velocity of the object.
Explanation:
The gravitational field strength on the surface of Jupiter can be calculated using the formula:
gJupiter = G×MJupiter / rJupiter²
where G is the universal gravitational constant, MJupiter is the mass of Jupiter, and rJupiter is the radius of Jupiter. Using the given values, we get:
gJupiter = (6.67 × 10-11 N m2 kg-2) × (320 × MEarth) / (11 × REarth)2
gJupiter = 26.0 N kg-1
Therefore, the answer is option C.
For the second question, when the object is at the bottom of the circle, the tension in the string is equal to the weight of the object plus the centripetal force required to keep it moving in the circular path. The centripetal force is given by:
Fc = mv2 / r
where m is the mass of the object, v is the velocity of the object, and r is the radius of the circle.
At the bottom of the circle, the velocity of the object is maximum and equal to the square root of the product of the centripetal force and the radius divided by the mass of the object:
v = sqrt(Fc × r / m)
Substituting the value of Fc in terms of v and solving for tension T, we get:
T = mg + mv2 / r
T = m(g + v2/ r)
For the third question, the rate at which work is done by the centripetal force is given by:
P = Fc × v
where P is the power, Fc is the centripetal force, and v is the velocity of the object. Substituting the value of Fc in terms of v, we get:
P = mv3 / r
Therefore, the rate at which work is done by the centripetal force is proportional to the cube of the velocity of the object.
Explanation:
Well this is quite tricky, as the gravitational field strength on the surface of Jupiter can be calculated using the formula:
g = G*M / r^2
Where G is the gravitational constant, M is the mass of Jupiter, and r is the radius of Jupiter.
Given that the radius of Jupiter is 11 times that of Earth (rJ = 11rE) and the mass of Jupiter is 320 times that of Earth (MJ = 320ME), we can substitute these values into the formula:
g = G x MJ / rJ^2
= G x (320ME) / (11rE)^2
= (G x 320 x ME) / (121 x rE^2)
Now, we know that G = 6.67 x 10^-11 N m^2 / kg^2 and gE = 9.8 m/s^2. So we can substitute these values and simplify:
g = (6.67 x 10^-11 N m^2 / kg^2 * 320 x ME) / (121 x rE^2)
= (2.14 x 10^16 N x ME) / rE^2
To get the gravitational field strength on the surface of Jupiter in terms of gE, we can divide g by gE:
g / gE = (2.14 x 10^16 N x ME) / (rE^2 x 9.8 m/s^2)
= (2.14 x 10^16 N x 5.97 x 10^24 kg) / ( (11 x 6.37 x 10^6 m)^2 x 9.8 m/s^2)
= 25.93
Therefore, the gravitational field strength on the surface of Jupiter is 25.93 times that of Earth.
Answer: C) 26 NG^-1
For an object of mass m at the end of a string of length r moving in a vertical circle at a constant angular speed w, the tension in the string at the bottom of the circle can be found using the formula:
T = mg + mv^2 / r
where g is the acceleration due to gravity, v is the velocity of the object at the bottom of the circle, and m is the mass of the object.
At the bottom of the circle, the object is moving horizontally, so the tension in the string is equal to the centripetal force required to keep it moving in a circle. The velocity of the object at the bottom of the circle can be found using the formula:
v = wr
where w is the angular speed of the object.
Substituting these values into the formula for tension, we get:
T = mg + m(wr)^2 / r
= mg + mw^2r
Therefore, the tension in the string at the bottom of the circle is T = mg + mw^2r.
Answer: T = mg + mw^2r
For an object of mass m moving in a horizontal circle of radius r with a constant speed v, the rate at which work is done by the centripetal force can be found using the formula:
W = Fc x v
where Fc is the centripetal force required to keep the object moving in a circle.
The centripetal force can be found using the formula:
Fc = mv^2 / r
Substituting this value into the formula for work, we get:
W = (mv^2 / r) x v
= mv^3 / r
Therefore, the rate at which work is done by the centripetal force is W = mv^3 / r.
Answer: W = mv^3
How does the power switch on a computer work?
the constant load p is applied to ball a as shown. as a result the system moves to the right on the smooth surface and during the process the spring stretches and contracts. what physical quantity is constant during the process?
The constant load p is applied to ball a as shown. as a result the system moves to the right on the smooth surface and during the process the spring stretches and contracts. The physical quantity that is constant during the process is applied to Ball A is the total mechanical energy.
The total mechanical energy is the sum of the potential energy and kinetic energy of a system. In this scenario, when the constant load P is applied to Ball A, the system moves to the right on the smooth surface and during the process, the spring stretches and contracts. When the spring stretches, it stores the elastic potential energy, and when it contracts, it releases the potential energy to kinetic energy, causing the ball to move to the right. The process repeats, causing Ball A to oscillate back and forth.
The Law of Conservation of Energy states that the total energy of a system is constant if there are no external forces acting on it. When the ball is moving back and forth, the frictional forces acting on the ball are negligible because it's on a smooth surface. As a result, the total mechanical energy of the system is conserved.
Learn more about potential energy at:
https://brainly.com/question/11592500
#SPJ11
g arrange the following three frequencies of light in order of increasing energy per photon. a. 100 mhz b. 10 mhz c. 100 ghz
In order of increasing energy per photon, the following three frequencies of light must be arranged:
b. 10 MHz a.100 MHz c.100 GHz
When light is absorbed or emitted by an atom, the energy of the atom changes. The light behaves both as a particle (called a photon) and as a wave.
This dual behavior is referred to as wave-particle duality. The energy of the photon is determined by its frequency, and the frequency of a light wave is inversely proportional to its wavelength.
The energy per photon is directly proportional to the frequency of the light.
The following three frequencies of light should be arranged in order of increasing energy per photon:
10 MHz 100 MHz 100 GHz
The frequency of 10 MHz has the lowest energy per photon since it has the lowest frequency of the three. The energy per photon of 100 MHz is higher than that of 10 MHz but lower than that of 100 GHz since it has a higher frequency. The energy per photon of 100 GHz is the highest of the three because it has the highest frequency.
For similar question frequencies of light
https://brainly.com/question/10728818
#SPJ11
if the same horizontal net force were exerted on both vehicles, pushing them from rest over the same distance, what is the ratio of their final kinetic energies?
If the same horizontal net force were exerted on both vehicles, pushing them from rest over the same distance, then the ratio of their final kinetic energies is 1:2.
According to the Work-Energy principle, the net work done on an object is equal to the change in its kinetic energy. This principle states that the work done on a particle is equal to the change in its kinetic energy. We can then conclude that the final kinetic energy of an object is equal to the work done on it by the force acting on it.
Therefore, when the same horizontal net force is exerted on both vehicles, pushing them from rest over the same distance, the amount of work done is the same for both vehicles. Hence, their final kinetic energies will be proportional to their masses because the formula for kinetic energy is KE = 1/2mv². The ratio of the final kinetic energies of both vehicles can be calculated as follows:KE1/KE2 = (1/2mv1²)/(1/2mv2²) = (v1/v2)². Here, v1 and v2 are the final velocities of the two vehicles. Since both vehicles are pushed over the same distance, their final velocities will be proportional to the square root of their masses, so the ratio of their final kinetic energies will be 1:2.
Learn more about kinetic energy at:
https://brainly.com/question/22174271
#SPJ11
a ufo increases its speed from 10 m/s to 1000 m/s in 3.0 seconds. determine the acceleration of the ufo.
Answer:
Explanation:
Durante as aulas, os estudantes da 3ª série deveriam escolher uma entre as três atividades físicas possíveis, sendo elas: natação, futsal e dança. Na turma, 25% escolheram dança, 15% escolheram natação, e os outros 24 estudantes escolheram futsal. Podemos afirmar que, nessa turma, existe um total de:
A) 64 alunos
B) 55 alunos
C) 48 alunos
D) 45 alunos
E) 40 alunos
the earth is approximately 8000 miles in diameter. i'm riding in a hot air balloon 1.5 miles above the surface of the earth. approximately how far away is the horizon?
The horizon is approximately 3,474 miles away when viewed from 1.5 miles above the surface of the Earth.
Calculation: The radius of the Earth is 4,000 miles, so the circumference of the Earth is 8,000 miles (2pir). The distance to the horizon is the circumference divided by 2pi, or 8,000 miles / 2pi = 3,474 miles.
The horizon is approximately 1.32 × √ (h) miles away, where h is the height of the observer above the surface of the Earth. Given the Earth's diameter, an observer in a hot air balloon at 1.5 miles above the surface of the Earth would be approximately 1.32 × √ (1.5) miles from the horizon.
The calculation is done as follows.1.32 × √ (1.5) miles= 1.32 × √ (1.5) miles = 1.32 × 1.22 miles= 1.61 miles So, an observer in a hot air balloon 1.5 miles above the surface of the Earth would be approximately 1.61 miles away from the horizon.
You can read more about radius of the Earth at https://brainly.com/question/22719331
#SPJ11
A diver makes 2,5 revolutions on the way from a 10-m-hich platform to the water. Assuming zero intial vertical velocity, find the average angular velocity during the dive.
To find the average angular velocity during the dive, we need to first calculate the time it takes for the diver to reach the water from the 10-meter high platform. Assuming zero initial vertical velocity and using the free fall equation:
h = 1/2 * g * t^2
where h = 10 meters, g = 9.81 m/s^2 (acceleration due to gravity), and t is the time in seconds.
Rearranging the equation to find t:
t^2 = 2 * h / g
t^2 = 2 * 10 / 9.81
t^2 ≈ 2.04
t ≈ √2.04 ≈ 1.43 seconds
Now that we have the time, we can calculate the average angular velocity (ω) using the formula:
ω = θ / t
where θ is the total angle in radians the diver rotates during the dive, and t is the time in seconds. The diver makes 2.5 revolutions, which is equal to 2.5 * 2π radians:
θ = 2.5 * 2π ≈ 15.71 radians
Now, we can find the average angular velocity:
ω = 15.71 radians / 1.43 seconds ≈ 10.99 radians/second
So, the average angular velocity during the dive is approximately 10.99 radians/second.
for more information on velocity : https://brainly.com/question/18084516
#SPJ11
19. A stone has a mass of 390 g and a density of 2. 7 g/cm3.
Cooking oil has a density of 0. 90 g/cm².
Which mass of oil has the same volume as the stone?
A 130 g
B 160 g
C 900 g
D 1200 g
(Show the working)
Answer:
A
Explanation:
First, we can find the volume of the stone:
[tex]v(stone) = \frac{m(stone)}{ρ(stone)} = \frac{390}{2.7} ≈144.44 \: {cm}^{3} [/tex]
[tex]v(oil) = v(stone) = 144.44 \: {cm}^{3} [/tex]
[tex]m(oil) = v \times ρ(oil) = 144.44 \times 0.90≈130 \: g[/tex]
The portion of string between the bridge and upper end of the fingerboard (the part of the string that is free to vibrate) of a certain musical instrument is 60.0 cm long and has a mass of 2.14 g . The string sounds an A4 note (440 Hz ) when played.
Part A) Where must the player put a finger (at what distance x from the bridge) to play a D5 note (587 Hz )? (See the figure (Figure 1) ) For both notes, the string vibrates in its fundamental mode.
Part B) Without retuning, is it possible to play a G4 note (392 Hz ) on this string?[Yes it is possible to play or No it's impossible to play]
Part C) Explain your answer in Part B: Why or Why not?
A), Multiply the length of the vibrating string (60.0 cm) by the ratio to find the distance x. B)No, it's impossible to play a G4 note (392 Hz) on this string without retuning, C) not possible without retuning.
Part A) To find the distance x from the bridge to play a D5 note (587 Hz), follow these steps:
1. Calculate the speed of the wave on the string using the formula: v = √(T/μ), where T is tension and μ is linear mass density.
2. Calculate the wavelength of the A4 note using the formula: λ = v/f, where f is the frequency of the A4 note (440 Hz).
3. Calculate the wavelength of the D5 note using the formula: λ = v/f, where f is the frequency of the D5 note (587 Hz).
4. Find the ratio between the A4 and D5 wavelengths: λ_A4 / λ_D5.
5. Multiply the length of the vibrating string (60.0 cm) by the ratio to find the distance x.
Part B) No, it's impossible to play a G4 note (392 Hz) on this string without retuning.
Part C) The reason why it's impossible to play a G4 note (392 Hz) without retuning is because the frequencies of the fundamental modes are fixed and cannot be changed unless the tension, mass, or length of the string is altered. To play a G4 note, the string would need to be adjusted so that its fundamental frequency is 392 Hz, which is not possible without retuning.
For more such questions on vibrating string
brainly.com/question/18849293
#SPJ11
suppose you wish to make a solenoid whose self-inductance is 2.4 mh. the inductor is to have a cross-sectional area of 1.80 10-3 m2 and a length of 0.045 m. how many turns of wire are needed?
We need approximately 369 turns of wire to make the solenoid.
The self-inductance (L) of a solenoid is given by the formula:
L = (μ₀ * N² * A * l) / l
where:
μ₀ = permeability of free space (4π × 10^-7 H/m)
N = number of turns of wire
A = cross-sectional area of the solenoid
l = length of the solenoid
We can rearrange this formula to solve for N:
N = [tex]\sqrt{L * l) / (M_0 * A))}[/tex]
Substituting the given values, we get:
N = [tex]\sqrt{2.4(10^-^3 H * 0.045 m) / (4\pi (10^-^7 H/m * 1.80(10^-^3 m^2))}[/tex]
N ≈ 369.25
Therefore, the turn of wire that we are needed are 369.25 turns.
Learn more about Solenoid: https://brainly.com/question/15504705
#SPJ11
will the car's propulsion increase, decrease or remain the same when the static friction is reduced, as if there is an icy/slippery road?
The car's propulsion will decrease when the static friction is reduced, as if there is an icy/slippery road. Static friction is the force that resists the movement of two surfaces in contact. When the static friction is reduced, the available friction for the car's propulsion is decreased, and the car's propulsion will be affected.
In order to understand this better, we need to understand friction. Friction is a force which acts in a direction opposite to the direction of motion and resists any change in the state of motion. Static friction is a force which acts in the direction opposite to the direction of motion and opposes any change in the state of rest of the body.
When there is a decrease in the static friction, the car will not be able to accelerate as quickly as it would on a normal road. This is because the static friction is the force which helps to accelerate the car and push it forward. On an icy/slippery road, the friction between the car and the ground will be greatly reduced and the car will be unable to move as quickly as it would on a normal road.
To summarize, the car's propulsion will decrease when the static friction is reduced, as if there is an icy/slippery road. This is because static friction is the force which helps to accelerate the car and push it forward and when there is a decrease in the static friction, the car will not be able to accelerate as quickly as it would on a normal road.
For more questions related to Static friction.
https://brainly.com/question/13000653
#SPJ11
A car rounds an unbanked curve of radius 80 m. If the coefficient of static friction between the road and car is 0.8, what is the maximum speed at which the car traverses the curve without slipping? V = _____ m/s
If the car rounds an unbanked curve of radius 80 m and the coefficient of static friction between the road and car is 0.8, then the maximum speed at which the car traverses the curve without slipping is V = 25.05 m/s.
The maximum speed at which the car traverses the curve without slipping can be determined using the following formula:
[tex]v = \sqrt{(\mu rg)}[/tex]
Where:
v = maximum speed
μ = coefficient of static friction
r = radius of curvature
g = acceleration due to gravity
Substituting the given values into the formula:
[tex]v = \sqrt {(\mu rg)}[/tex]
[tex]v = \sqrt{(0.8 \times 80 \times 9.81)}[/tex]
v = 25.05 m/s
Therefore, the maximum speed at which the car can traverse the curve without slipping is 25.05 m/s.
Learn more about acceleration:
https://brainly.com/question/460763
#SPJ11
what is the magnitude of the upward acceleration of the load of bricks? express your answer with the appropriate units.
The magnitude of the upward acceleration of a load of bricks is 2.77 m/s².
What is tension in the rope?Tension is the pulling force cаrried by flexible mediums like ropes, cаbles аnd string. Tension in а body due to the weight of the hаnging body is the net force аcting on the body.
The tension in the string when the body cаn be given аs,
T = m(a +g)
Here, (m) is the mаss of the body, (а) is the аccelerаtion аnd (g) is the аccelerаtion due to grаvity.
The mаss of the bricks is 15.2 kg.The mаss of the counterweight is 27.2 kg аnd the system is releаsed from the rest.The tension due to the bricks with mаss of 15.2 kg is,
T = 15.2(a + 9.80)
The tension due to the bricks with mass of 27.2 kg is,
T = 27.2(9.80 - a)
Equate both the equation as,
15.2(a + 9.80) = 27.2(9.80 - a)
15.2a + 148.96 = 266.56 - 27.2a
42.4a = 117.6
a = 2.77 m/s²
Thus, the magnitude of the upward acceleration of a load of bricks is 2.77 m/s².
Your question is incomplete, but most probably your full question can be seen in the Attachment.
For more information about tension refers to the link: https://brainly.com/question/11191036
#SPJ11
question 3 (3 points) a horizontal wire carries a large current. a second wire carrying a current in the same direction is suspended below it. can the current in the upper wire hold the lower wire in suspension against gravity? justify your answer.
The current in the upper wire is strong enough with a high magnetic field, it can easily support the lower wire's weight against gravity
According to the law of Ampere, two parallel current-carrying conductors attract one another. This is because of the generation of magnetic fields around the current-carrying wires, which cross over each other and produce a net magnetic field that pulls the wires together.
Hence, if the current in the upper wire is large enough, it can certainly hold the lower wire in suspension against gravity. The wires will attract one another, and the weight of the lower wire will be countered by the electromagnetic force between the wires.
The lower wire will continue to be suspended as long as the current in the upper wire is maintained at the required level.
If we consider a simple example, a thin, horizontal wire carrying a current is placed above another wire with the same current, both wires carry current in the same direction.
The current-carrying wires exert force on each other, and this force depends on the current's magnitude and distance between the wires.
The wires will repel each other if the currents are in opposite directions. If they are in the same direction, the wires will attract each other. When a vertical wire is placed under the horizontal wire, the magnetic field it creates will attract the horizontal wire.
For similiar question on magnetic field
https://brainly.com/question/26257705
#SPJ11
a closely wound, circular coil with radius 2.20 cm has 780 turns. part a part complete what must the current in the coil be if the magnetic field at the center of the coil is 0.0760 t ? express your answer with the appropriate units. i
The current in the coil must be 3.20A if the magnetic field at the center of the coil is 0.0760T.
The formula used to calculate the magnetic field at the center of a circular coil is given as:
B = μ0*I*n*r² / 2*(r² + x²)³/2
Where,
B is the magnetic field at the center of the coil
I is the current in the coil
n is the number of turns
r is the radius of the coil
x is the distance between the center of the coil and the point where the magnetic field is to be calculated
μ0 is the permeability of free space.
Now, for the magnetic field at the center of the coil, x = 0, we have:
B = μ0*I*n*r² / 2*r³
I = 2*B*r³ / (μ0*n)
Putting the given values in this formula, we get:
I = 2*0.0760*2.20³ / (4π*10⁻⁷*780) = 3.20 A
Therefore, if the magnetic field at the center of the coil is 0.0760T, then the current in the coil must be 3.20A.
Learn more about current here: https://brainly.com/question/24858512.
#SPJ11