Formula
RnF3+

(2) Lewis dot structure​

The vapor pressure at 49.5 °C is:

DP = 48.8 kJ/mol / 8.314 J/mol*K * (1/451.0 K - 1/322.65 K) * 49.5

DP = 0.24 torr (approx)

The vapor pressure of benzaldehyde at 49.5°C is approximately 0.24 torr.

The heat of vaporization (ΔHvap) and the normal boiling point (Tb) can be used to determine the vapor pressure of a liquid at a given temperature using the Clausius-Clapeyron equation. The Clausius-Clapeyron equation states that the change in vapor pressure (DP) with temperature (DT) is directly proportional to the heat of vaporization (ΔHvap) and inversely proportional to the absolute temperature (T) in kelvin.

DP/DT = ΔHvap / R * (1/T)

where R is the gas constant.

We can use this equation to solve for the vapor pressure of benzaldehyde at 49.5°C.

First, convert 49.5°C to kelvin:

T = 49.5°C + 273.15 = 322.65 K

Next, we need to use the Clausius-Clapeyron equation to solve for vapor pressure at a temperature T and the normal boiling point Tb:

DP/DT = ΔHvap / R * (1/T) = ΔHvap / R * (1/Tb - 1/T)

DP = ΔHvap / R * (1/Tb - 1/T) * DT

The vapor pressure at 49.5 °C is:

DP = 48.8 kJ/mol / 8.314 J/mol*K * (1/451.0 K - 1/322.65 K) * 49.5

DP = 0.24 torr (approx)

The vapor pressure of benzaldehyde at 49.5°C is approximately 0.24 torr.

Learn more about vapor pressure in brainly.com/question/11864750

#SPJ1

The vapor pressure of the benzaldehyde is  196 torr.

We know that the vapor pressure would have to do with the ease that we can use to convert the substance that is in question from liquid to gas. When we have two substances that are at different temperatures than we have;

ln(P2/P1) = -ΔH/R(1/T1 - 1/T2)

P2 = final pressure

P1 = initial pressure

R = gas constant

T1 = initial temperature

T2 = final temperature

Thus;

ln(P2/1) = -48.8* 10^3/8.314(1/451 - 1/322.5)

lnP2 = -5869.6(0.0022 - 0.0031)

lnP2 = 5.28

P2 =e^5.28

P2 = 196 torr

Learn more about vaporization:https://brainly.com/question/14480429

#SPJ1

Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons. Despite often being less than a tenth of an atom's size, the nucleus makes up more than 99.9% of the atom's mass.

The term "atomic structure" describes the structure of an atom, which has a nucleus (centre) that contains both protons (positively charged) and neutrons (neutral). The centre of the nucleus is circled by the negatively charged electrons.

Positively charged protons, negatively charged electrons, and neutral neutrons make up the three types of subatomic particles that make up an atom. Nearly equal in mass, protons and neutrons are found in the dense nucleus of the atom.

Thus, Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons.

To learn more about an atom, follow the link;

https://brainly.com/question/29695801

#SPJ1

Answer:

oxygen-16 is a stable isotope of oxygen, having 8 neutrons and 8 protons in its nucleus. It has a mass of 15. u

Based on the information provided, I would recommend the Sunburst Variety of corn as the best choice for growing in the drought conditions of the desert environment.

Sunburst Variety of corn has been specifically developed to be drought-tolerant, meaning that it can survive and produce a good yield even with minimal rainfall.

Therefore, I would recommend the Sunburst variety of corn as the best choice for growing in the desert environment due to its drought-tolerance, deep root system, heat tolerance, high yield, and good quality grain.

Learn more about corn from

https://brainly.com/question/397421

#SPJ1

The nonmetals in the Groups 16 and 17 gain electrons making them an anion.

The nonmetals of group 16 are made up of Oxygen, Sulfur, and Selenium whereas group 17, also called the halogen group is made up of Fluorine, Chlorine, etc.

The further right we go in the periodic table, the atomic size decreases. Due to the increase in the number of protons, the electrons are more tightly bound and the atom shows strong attraction to electrons.  

The gain of additional electrons helps in the completion of octets for the atoms further making their configuration stable, and more alike to that of the noble gases.

To learn more about electron gain click here:

brainly.com/question/14351799

#SPJ1

Answer:

3.3atm is the new pressure of the container

Explanation:

In the car, the temperature of the container increases from 25°C  =298K to 55°C = 328K. To solve this question we must use the Boyle's law that state that the pressure of a gas is directly proportional to its absolute temperature under constant volume. The equation is:

P1T2 = P2T1

Where P is pressure and T absolute temperature of 1, initial state of the gas and 2, final state.

Replacing:

P1 = 3atm

T2 = 328K

P2 = ?

T1 = 298K

3atm*328K = P2*298K

P2 = 3.3atm is the new pressure of the container

Answer:

3.3 atm

Explanation:

First we convert 25 °C and 55 °C to K:

We can solve this problem by using Gay Lussac's law, which states that at constant volume:

Where in this case:

We input the data:

And solve for P₂:

The new volume of the system can be found to be 4.9 L.

We have to know that we do use the Boyle's law when we are trying to get the association that we know that does exist when we are looking at the volume and the pressure of the gas and the both can be shown to be inversely proportional.

We then have that;

Initial pressure(P1) =  765 mmHg

Initial volume (V1) = 5 L

Final pressure (P2)= 780 mmHg

Final volume (V2) = ?

Then;

P1V1 = P2V2

V2 = 765 * 5/780

V2 = 4.9 L

As such, we can see from the calculation that the new volume that we would obtain is 4.9 L

Learn more about Boyle's law:https://brainly.com/question/1437490

#SPJ1

Answer:

Property of an element by virtue of which it exists in two or more forms which differ only in their physical properties is known as allotropy. Allotropes are the different physical forms in which the element can exist. Allotropes are different physical forms of the same element.

Also-

Allotropes are different forms of the same element in the molecular level. Isotopes are different forms of atoms of the same chemical element. The key difference between allotropes and isotopes is that allotropes are considered at the molecular level, whereas isotopes are considered at the atomic leve

Explanation:

~Hope this helps~

Answer: what is the answer

Explanation:

I need it nowwww

Answer:

Hello your question is incomplete attached below is the complete question

answer : attached below

Explanation:

The design is attached below

The reagents are : H₂SO₄, H₂O,  HBr,  NaOCH₂CH₃

For the scheme = 1.NaOH,H2O   2. H₃O+3,   heat,  SOCl₂,  Et3N

Answer:

umm use a calculator ok bye

Answer:

The answer is lithium bromide because it is the combination of a metal (lithium) and a nonmetal (bromine). The indicator that this is the correct name, rather than lithium bromate, is that the compound is composed of only two elements and does not contain oxygen. Yes, this is why NaNO3 is Sodium Nitrate; it is composed of three different elements (sodium, nitrogen, and oxygen).

Explanation:

Answer:

The last one.

Explanation:

The other ones add more force or give the same but the last one reduces it.

Answer: not 100% sure.

Explanation:

The flame test used for to identify an unknown sample by its emission spectrum

To learn more about flame test refers to:

brainly.com/question/26873482

#SPJ1

Answer: to identify an unknown sample by its emission spectrum

Explanation:

Answer:

4.76×10¯⁵ cm

Explanation:

We'll begin by converting 476 nm to m. This can be obtained as follow:

1 nm = 1×10¯⁹ m

Therefore,

476 nm = 476 nm × 1×10¯⁹ m / 1 nm

476 nm = 4.76×10¯⁷ m

Finally, we shall convert 4.76×10¯⁷ m to cm. This can be obtained as follow:

1 m = 100 cm

Therefore,

4.76×10¯⁷ m = 4.76×10¯⁷ m × 100 cm / 1 m

4.76×10¯⁷ m = 4.76×10¯⁵ cm

Thus,

476 nm = 4.76×10¯⁵ cm

Answer:

Nitrogen dioxide does not rekindle a glowing splinter becuase it is a not a very good oxidant. However, it will support the combustion of burning substances that are able to decompose it into nitrogen and oxygen gas.

NO₂ (g) ----> N₂ (g) + O₂

The oxygen then produced will go ahead to rekindle the glowing splinter.

Explanation:

Nitrogen dioxide isa reddish brown gas that is given when trioxiponitrate (v) salts, for example Lead (ii) trioxonitrate (v) of heavy metals are heated.

It is an mild oxidizing agent due to the presence of oxygen in the molecule of the compound.

It does not support combustion and does not burning air because of the inertnesss of the nitrogen atom. However, it will support the combustion of burning substances that are able to decompose it into nitrogen and oxygen gas.

For example, phosphorus is a very combustible material due to its low ignition temperature of 35°C. It catches fire spontaneously in air. Nitrogen dioxide is decomposed by burning phosphorus to nitrogen and oxygen. The oxygen produced supports further combustion of the burning phosphorus.

NO₂ (g) ----> N₂ (g) + O₂

Answer:

3.4

373.4

.45.=2

46.=3 .6.2=4

Answer:

110k because 2 x 110 =220

A synthetic ingredient is a substance that has been synthesized in a lab using different chemical procedures. Its goal is to mimic a natural chemical to duplicate its structure and, consequently, its fragrance.

In most cases, it refers to a naturally occurring substance, like hyaluronic acid, which was formerly extracted from animals and has now been molecularly copied in a laboratory to provide the same results. Not everything that is manufactured or chemical is inherently harmful to you. Although not all synthetic cosmetic components are the same, some have been proven to be toxic, accumulate in the body over time, and have been associated with cancer as well as irritations of the skin and mucous membranes.

To know more about synthetic ingridient, check out:

https://brainly.com/question/29774084

#SPJ1

My exploration in one specific element as well as the sharing of the historical context and modern day application will be focused in the element Carbon. The essay is written below

Carbon was discovered by the ancient Egyptians, and it gets its name from the Latin word "carbo," which means "charcoal."

Carbon is a nonmetal that is located in Group 14 of the periodic table. It has a unique ability to form a wide variety of chemical compounds, which is one of the reasons it is so important in modern chemistry. Carbon has four valence electrons, which allows it to form stable chemical bonds with other elements.

Carbon is a chemical element that is found in all living things. It is a key component of proteins, DNA, and other essential biomolecules. Carbon can exist in several different forms, including graphite, diamond, and various forms of carbon-based compounds called organic molecules.

Carbon has many important implications for society. It is used as a fuel to produce energy, and it is also a key ingredient in the production of steel and other metals. Carbon is also an essential component of many plastics and other synthetic materials. However, carbon can also have negative impacts on the environment, as the burning of fossil fuels releases carbon dioxide into the atmosphere, contributing to climate change.

Carbon has many practical applications, including its use as a fuel, a structural material, and a chemical feedstock. However, carbon can also be hazardous in certain situations. For example, inhaling carbon monoxide can be deadly, and carbon dust can be explosive. Carbon is commonly encountered in many different forms, including coal, oil, and natural gas.

Personally, I think that carbon is a very interesting element with a wide range of important applications. It is fascinating to consider the role that carbon plays in the biology of living organisms, as well as its practical uses in industry and technology.

Some questions for my classmates might include: What are some other interesting properties of carbon that you have learned about? Can you think of any examples of how carbon is used in your everyday life? Do you think that the benefits of carbon outweigh the potential drawbacks?

One peer-reviewed resource that I found informative is "The Many Forms of Carbon," an article published in the journal Chemical & Engineering News. (Citation: "The Many Forms of Carbon." Chemical & Engineering News, vol. 95, no. 39, 2017, pp. 38-54.)

Learn more about Carbon from

https://brainly.com/question/20994647
#SPJ1

Bi-phosphate detergents

Hypochlorous

Complete question is;

Which statements regarding the Henderson-Hasselbalch equation are true?

1. If the pH of the solution is known as is the pKa for the acid, the ratio of conjugate base to acid can be determined.

2. At pH = pKa for an acid, [conjugate base] = [acid] in solution.

3. At pH > pKa for an acid, the acid will be mostly ionized.

4. At pH < pKa for an acid, the acid will be mostly ionized.

A. All of the listed statements are true. B. 1, 2, and 3 are true.

C. 2, 3, and 4 are true.

D. 1, 2, and 4 are true.

Answer:

B. 1, 2, and 3 are true.

Explanation:

The formula for the Henderson-Hasselbalch equation is:

pH = pka + log₁₀([A^(-)]/[HA])

Where;

PH is acidity of solution

ka is acid dissociation constant

A^(-) is concentration of conjugate base

HA is concentration of Acid

- For statement 1; If the pH of the solution is known as is the pKa for the acid, the ratio of conjugate base to acid can be determined;

pH = pka + log₁₀([A^(-)]/[HA])

pH - pka = log₁₀([A^(-)]/[HA])

10^(pH - pka) = ([A^(-)]/[HA])

Since we can find the ratio as seen, then the statement is true

- For statement 2: At pH = pKa for an acid, [conjugate base] = [acid] in solution;

We will substitute pH for pKa;

pH = pH + log₁₀([A^(-)]/[HA])

This give;

0 = log₁₀([A^(-)]/[HA])

10^(0) = [A^(-)]/[HA]

1 = [A^(-)]/[HA]

Thus; [A^(-)] = [HA]

Thus, the statement is true

- For statement 3: At pH > pKa for an acid, the acid will be mostly ionized;

This means that;

pH - pKa is greater than 0 and thus;

10^(pH - pKa) is greater than 1.

Thus;

[A^(-)]/[HA] > 1

[A^(-)] > [HA]

So more acid is ionized than base.

So the statement is true.

- For statement 4: At pH < pKa for an acid, the acid will be mostly ionized;

This means that;

pH - pKa is less than 0 and thus;

10^(pH - pKa) is less than 1.

Thus;

[A^(-)]/[HA] < 1

[A^(-)] < [HA]

So we have more base ionized than acid. So statement is false

Answer:

wow okay um so first you go home, get in bed, never open that computer again

Explanation:

Answer:

A. By the circumference of the epicenter

Explanation:

If the Earth's lithospheric plates begin to move slowly, stresses emanate in the crust, most at times close to the plate boundaries. These stresses (compression, tension strain, and shear) accumulate in the crust until they surpass the rock's strength or the pressure around an internal fault. And there's a sudden slippage of rock around a fault.

The planet shakes and the rocks lurch to their new position in a matter of seconds as the stress energy is released. Seismic waves move away from the broken portion of the fault, just like ripples from a pebble landing on calm water.

Seismologists may estimate when the slippage started on a fault, the area of the slipping fault, the sum of slippage or fault throw (i.e. just how much the crust moved), and the length of time it takes for the slippage to happen by measuring the circumference of the epicenter which is the mapped area where the earthquake is taken place.

Answer: C) All of the rabbits in a forest, as well as their predators and food plants

Explanation:

The community refers to all living things in a certain area including plants and animals. If the given area is a forest therefore, the rabbit being a living thing, as well as its predators and the plants that it relies on will be considered the community.

This is not unlike a human community where everyone in a given area is considered to be part of the community.

Answer:

C

Explanation:

I got this question on an edusmart.

Answer:

-1396 kJ

Explanation:

Let's consider the following balanced equation.

4 NH₃(g) + 7 O₂(g) ⇒ 4 NO₂(g) + 6 H₂O(l)

We can calculate the standard change in enthalpy for the reaction (ΔHr) using the following expression.

ΔHr = ∑ np × ΔHf(p) - ∑ nr × ΔHf(r)

where,

ΔHr = 4 mol × ΔHf(NO₂(g)) + 6 mol × ΔHf(H₂O(l)) - 4 mol × ΔHf(NH₃(g)) - 7 mol × ΔHf(O₂(g))

ΔHr = 4 mol × (34 kJ/mol) + 6 mol × (-286 kJ7mol) - 4 mol × (-46 kJ/mol) - 7 mol × (0 kJ/mol) = -1396 kJ