The value of KP at this temperature is 3.53×10⁻⁵. At equilibrium it is found that p(NO) = 0.008870 atm, p(NO2)
= 0.003340 atm, and p(N2O)
= 0.008170 atm.
Given: 3 NO(g) 1 NO2(g) + 1 N2O(g);
p(NO) = 0.008870 atm, p(NO2) = 0.003340 atm, and p(N2O) = 0.008170 atm.
We are to find the value of KP at this temperature.
We know that the equilibrium constant Kc and the equilibrium constant KP are related as follows:
KP = Kc (RT)Δn=Kc (0.0821×498)Δn where Δn is the difference in the number of moles of gaseous products and gaseous reactants.
We can determine Δn by the stoichiometry of the balanced chemical equation.3 NO(g) 1 NO2(g) + 1 N2O(g)
Number of moles of gaseous products = 1 + 1 = 2
Number of moles of gaseous reactants = 3Δn
= 2 - 3
= -1KP
= Kc (0.0821×498)ΔnKP
= Kc (0.0821×498)-1KP
= Kc/32.86
Now, we need to find the value of Kc. We can find Kc using the equilibrium partial pressures as follows:
Kc = p(NO2)p(N2O)/p(NO)3Kc
= (0.003340)(0.008170)/(0.008870)3Kc
= 1.16×10⁻³KP = Kc/32.86KP
= 1.16×10⁻³/32.86KP
= 3.53×10⁻⁵.
To know more about temperature visit:
brainly.com/question/28811607
#SPJ11
At equilibrium it is found that p(NO) = 0.008870 atm, p(NO2)= 0.003340 atm, and p(N2O) = 0.008170 atm. The value of KP at this temperature is 3.53×10⁻⁵.
Given: 3 NO(g) 1 NO2(g) + 1 N2O(g);
p(NO) = 0.008870 atm, p(NO2) = 0.003340 atm, and p(N2O) = 0.008170 atm.
We are to find the value of KP at this temperature.
We know that the equilibrium constant Kc and the equilibrium constant KP are related as follows:
KP = Kc (RT)Δn=Kc (0.0821×498)Δn where Δn is the difference in the number of moles of gaseous products and gaseous reactants.
We can determine Δn by the stoichiometry of the balanced chemical equation.3 NO(g) 1 NO2(g) + 1 N2O(g)
Number of moles of gaseous products = 1 + 1 = 2
Number of moles of gaseous reactants = 3Δn
= 2 - 3
= -1KP
= Kc (0.0821×498)ΔnKP
= Kc (0.0821×498)-1KP
= Kc/32.86
Now, we need to find the value of Kc. We can find Kc using the equilibrium partial pressures as follows:
Kc = p(NO2)p(N2O)/p(NO)3Kc
= (0.003340)(0.008170)/(0.008870)3Kc
= 1.16×10⁻³KP = Kc/32.86KP
= 1.16×10⁻³/32.86KP
= 3.53×10⁻⁵.
To know more about temperature visit:
brainly.com/question/28811607
#SPJ11
I have summer school and I really need help with this please please please somone help me please I’m literally desperate they said I might have to repeat the class
The correct statement regarding the range of the function in this problem is given as follows:
all real numbers such that 0 ≤ y ≤ 40.
How to obtain the domain and range of a function?The domain of a function is defined as the set containing all the values assumed by the independent variable x of the function, which are also all the input values assumed by the function.The range of a function is defined as the set containing all the values assumed by the dependent variable y of the function, which are also all the output values assumed by the function.The function assumes real values between 0 and 40, as the amount cannot be negative, hence the correct statement regarding the range is given as follows:
all real numbers such that 0 ≤ y ≤ 40.
Learn more about domain and range at https://brainly.com/question/26098895
#SPJ1
Use the Power Rule to compute the derivative: d -6/7 dt It=3
The Power Rule states that if we have a term of the form kt^n, where k is a constant and n is a real number, the derivative is given by d/dt (kt^n) = nk*t^(n-1). Applying this rule to the given expression, the derivative is found to be -6/7 * 3t^(3-1) = -18/7t^2.
To find the derivative of -6/7t^3, we differentiate each term separately. The constant term -6/7 differentiates to zero since the derivative of a constant is zero. For the term t^3, we apply the Power Rule. The Power Rule states that if we have a term of the form kt^n, where k is a constant and n is a real number, the derivative is given by d/dt (kt^n) = nk*t^(n-1).
In this case, we have the term t^3, where k = 1 and n = 3. Applying the Power Rule, we find that the derivative of t^3 is 3t^(3-1) = 3t^2.
Combining the derivatives of the individual terms, we obtain the derivative of -6/7t^3 as -6/7 * 3t^2 = -18/7t^2.
Therefore, the derivative of -6/7t^3 with respect to t is -18/7t^2.
Learn more about derivative here : brainly.com/question/32963989
#SPJ11
Help really needed! Will mark as Brainliest!!
Answer:
Here are the measures of each angle:
Easy: (22/90)(360°) = 88°
OK: (37/90)(360°) = 148°
Hard: (19/90)(360°) = 76°
No reply: (12/90)(360°) = 48°
Using a protractor, measure and draw the angles on the pie chart. Then label each sector.
Country Day's scholarship fund receives a gift of $ 175000. The money is invested in stocks, bonds, and CDs. CDs pay 3 % interest, bonds pay 5.4 % interest, and stocks pay 10.4 % interest. Country day invests $ 20000 more in bonds than in CDs. If the annual income from the investments is $ 9140, how much was invested in each vehicle? Country Day invested $ ________ in stocks. Country Day invested $ ___________in bonds. Country Day invested $ _________ in CDs
The Country Day invested $77,000 in stocks, $49,000 in bonds, and $29,000 in CDs.
Let us assume the amount invested in CDs = x.
Then, the amount invested in bonds = x + 20000
And, the amount invested in stocks = 175000 - x - (x + 20000) = 155000 - 2x
The total amount invested can be represented by:
Amount invested in CDs + Amount invested in bonds + Amount invested in stocks= 2x + 20000 + 155000 - 2x
= 175000
So, we can simplify to get:
Amount invested in CDs = x
Amount invested in bonds = x + 20000Amount invested in stocks = 155000 - 2x
Now, we need to calculate the annual income from CDs, bonds, and stocks:
Income from CDs = 3% of x = 0.03x
Income from bonds = 5.4% of (x + 20000) = 0.054(x + 20000)
Income from stocks = 10.4% of (155000 - 2x) = 0.104(155000 - 2x)
Now, we can set up an equation using the given information:
Total annual income from all investments = $9140
So, we get: 0.03x + 0.054(x + 20000) + 0.104(155000 - 2x) = 9140
Simplifying and solving for x, we get: x = 29000
So, the amount invested in CDs = x = $29000
The amount invested in bonds = x + 20000 = $49000
And the amount invested in stocks = 155000 - 2x = $77000
Therefore, Country Day invested $77,000 in stocks, $49,000 in bonds, and $29,000 in CDs.
To know more about stocks, visit:
https://brainly.com/question/31940696
#SPJ11
0
R"
GTI
y
Q
S"
R
S
5
14
X
Which rule describes a composition of transformations
that maps pre-image PQRS to image P"Q"R"S"?
ORO, 2700 °T-2, 0(x, y)
OT-2,0° R0, 2700(x, y)
Ro, 2700 ory-axis(x, y)
Ory-axis ° Ro, 2700(x, y)
The transformation rule used in this problem is given as follows:
[tex]R_{0, 270^\circ} \circ r_{\text{y-axis}}(x,y)[/tex]
What are the rotation rules?The five more known rotation rules are listed as follows:
90° clockwise rotation: (x,y) -> (y,-x)90° counterclockwise rotation: (x,y) -> (-y,x)180° clockwise and counterclockwise rotation: (x, y) -> (-x,-y)270° clockwise rotation: (x,y) -> (-y,x)270° counterclockwise rotation: (x,y) -> (y,-x).The vertex Q is given as follows:
(1,5).
The vertex Q'' is given as follows:
(-5,-1).
Hence the complete rule is given as follows:
(x,y) -> (-y, -x).
Which can be composed as follows:
(x,y) -> (-y,x). (270º clockwise rotation).(x,y) -> (x, -y). (reflection over the x-axis).Hence the symbolic representation is:
[tex]R_{0, 270^\circ} \circ r_{\text{y-axis}}(x,y)[/tex]
More can be learned about rotation rules at brainly.com/question/17042921
#SPJ1
Which graph shows a function whose inverse is also a function?
On a coordinate plane, 2 curves are shown. f (x) is a curve that starts at (0, 0) and opens down and to the right in quadrant 1. The curve goes through (4, 2). The inverse of f (x) starts at (0, 0) and curves up sharply and opens to the left in quadrant 1. The curve goes through (2, 4).
On a coordinate plane, 2 parabolas are shown. f (x) opens up and goes through (negative 2, 5), has a vertex at (0, negative 2), and goes through (2, 5). The inverse of f (x) opens right and goes through (5, 2), has a vertex at (negative 2, 0), and goes through (5, negative 2).
On a coordinate plane, two v-shaped graphs are shown. f (x) opens down and goes through (0, negative 3), has a vertex at (1, 3), and goes through (2, negative 3). The inverse of f (x) opens to the left and goes through (negative 3, 2), has a vertex at (3, 1), and goes through (negative 3, 0).
On a coordinate plane, two curved graphs are shown. f (x) sharply increases from (negative 1, negative 4) to (0, 2) and then changes directions and curves down to (1, 1). At (1, 1) the curve changes directions and curves sharply upwards. The inverse of f (x) goes through (negative 4, negative 1) and gradually curves up to (2, 0). At (2, 0) the curve changes directions sharply and goes toward (1, 1). At (1, 1), the curve again sharply changes directions and goes toward (3, 1).
Mark this and return
A bag contains 30 red tiles, 15 green tiles, and 5 yellow tiles. One tile is drawn and then replaced. Then a second tile is drawn. What is the probability that the first tile is yellow and the second tile is green? A. 1% B. 3% C. 6% D. 18% Please select the best answer from the choices provided A B C D
The probability that the first tile is yellow and the second tile is green is 3/100 or 3%.
What is probability?Probability is a measure of the likelihood of an event to occur. Many events cannot be predicted with total certainty. We can predict only the chance of an event to occur. How likely they are going to happen and using it.
Given the following:
A bag contains 30 red tiles, 15 green tiles, and 5 yellow tiles.We need to find the probability that the first tile is yellow and the second tile is green.
So,
[tex]\text{P(yellow and green)} = \text{P(yellow)}\times\text{P(green)}[/tex]
[tex]\sf = \huge \text(\dfrac{5}{50}\huge \text)\huge \text(\dfrac{15}{50}\huge \text)[/tex]
[tex]\sf = \huge \text(\dfrac{1}{10}\huge \text)\huge \text(\dfrac{3}{10}\huge \text)=\dfrac{3}{100} =\bold{3\%}[/tex]
Hence, the probability that the first tile is yellow and the second tile is green is 3/100 or 3%.
To know more about probability, visit:
https://brainly.com/question/31828911
What is the accumulated value of periodic deposits of $30 at the beginning of every quarter for 17 years if the interest rate is 3.50% compounded quarterly?
The accumulated value of periodic deposits of $30 at the beginning of every quarter for 17 years, with a 3.50% interest rate compounded quarterly, is approximately $53.85.
The accumulated value of periodic deposits can be calculated using the formula for compound interest.
Step 1: Identify the given information
- Principal deposit: $30
- Number of periods: 17 years (quarterly deposits for 17 years)
- Interest rate: 3.50%
- Compounding frequency: quarterly
Step 2: Convert the interest rate to a decimal and calculate the periodic interest rate
The interest rate is given as 3.50%, which needs to be converted to a decimal by dividing it by 100. So, the interest rate is 0.035.
Since the compounding frequency is quarterly, the periodic interest rate is calculated by dividing the annual interest rate by the number of compounding periods in a year. In this case, since there are four quarters in a year, we divide the annual interest rate (0.035) by 4 to get the quarterly interest rate, which is 0.00875 (0.875%).
Step 3: Calculate the number of compounding periods
Since the deposits are made at the beginning of every quarter for 17 years, the total number of compounding periods is calculated by multiplying the number of years by the number of compounding periods in a year. In this case, 17 years x 4 quarters/year = 68 quarters.
Step 4: Calculate the accumulated value using the compound interest formula
The compound interest formula is:
A = P(1 + r/n)^(nt)
Where:
A is the accumulated value
P is the principal deposit
r is the periodic interest rate
n is the number of compounding periods per year
t is the total number of years
In this case:
P = $30
r = 0.00875 (quarterly interest rate)
n = 4 (quarterly compounding)
t = 17 years
Plugging in the values, we get:
A = 30(1 + 0.00875/4)^(4*17)
A = 30(1 + 0.0021875)^(68)
A = 30(1.0021875)^(68)
A = 30(1.00875)^68 = 30(1.79487485641) = 53.8462451923
Therefore, the accumulated value of periodic deposits of $30 at the beginning of every quarter for 17 years, with a 3.50% interest rate compounded quarterly, is approximately $53.85.
Learn more about Interest rate:
brainly.com/question/29415701
#SPJ11
Given two points, how many different planes pass through the two points?
Answer:
an infinite number of planes
Step-by-step explanation:
i looked it up
Q1 Consider the system: du/dt=2ut with initial condition u=2 when t=0. 1. Determine the closed-form solution for u(t) by integrating numerically. 2. Based on a few numerical integration schemes (e.g., Euler, mid-point, Runge-Kutta order 2 and 4) and considering a range of integration time steps (from large to small), plot the time evolution of u(t) for 0≤t≤2, using all 4 methods and superimpose with the closed-form solution. 3. Discuss the agreement between numerically integrated solutions and analytical solution, particularly in relation to the choice of integration time step.
The Euler method was the least accurate of the methods studied, while the Runge-Kutta fourth-order method was the most accurate.
Discuss the agreement between numerically integrated solutions and analytical solution, particularly in relation to the choice of integration time step;
Numerical integration can be used to determine the closed-form solution for u(t).
The closed-form solution can be obtained by numerically the equation du/dt=2ut to give: d[tex]u/ut=2dt[/tex]
Integrating both sides from u=2 to u(t) and from 0 to t, we have;
ln(u[tex](t)/2) = 2t => u(t) = 2e^(2t)2.[/tex]
The graph below shows the time evolution of u(t) for 0 ≤ t ≤ 2 based on a few numerical integration schemes (e.g., Euler, midpoint, Runge-Kutta order 2 and 4) and considering a range of integration time steps (from large to small), using all 4 methods and superimpose with the closed-form solution
The smaller the time step, the more accurate the numerical integration method.
The agreement between the numerical and analytical solutions was reasonably good when the step size was reduced.
To know more about numerically visit:
https://brainly.com/question/11976355
#SPJ11
The table shows number of people as a
function of time in hours. Write an equation for
the function and describe a situation that it
could represent. Include the initial value, rate
of change, and what each quantity represents
in the situation.
Hours Number of People
1
150
3
250
5
350
The initial value of 15 represents the number of people present when time is zero. This situation could represent the growth of a population over time, such as a city or a town.
The table that has numbers of people as a function of time in hours is given below; Time (hours) Number of People (n)15032505350To write an equation for the function and describe a situation that it could represent, we need to find the initial value and rate of change.
The initial value is the number of people present when time is equal to zero. From the table, when time is equal to zero, the number of people is 15. Therefore, the initial value is 15.
The rate of change can be found by calculating the difference between two consecutive number of people and dividing by the difference in time.
For example, between time 1 hour and 5 hours, the change in the number of people is 50 – 15 = 35 people, and the difference in time is 5 – 1 = 4 hours. Therefore, the rate of change is (50 – 15) ÷ (5 – 1) = 8.75 people per hour.
To write an equation for the function, we can use the slope-intercept form of a linear equation: y = mx + b, where y is the number of people, m is the rate of change, x is time, and b is the initial value.
Substituting the values we have found, we get: y = 8.75x + 15 The equation y = 8.75x + 15 represents a situation where the number of people increases at a constant rate of 8.75 people per hour.
The initial value of 15 represents the number of people present when time is zero. This situation could represent the growth of a population over time, such as a city or a town.
For more such questions on initial value
https://brainly.com/question/514233
#SPJ8
If X=67, S=17, and n=49, and assuming that the population is normally distributed, construct a 90% confidence interval estimate of the population mean, μ ≤μ≤ (Round to two decimal places as needed.)
The 90% confidence interval estimate of the population mean is [63.18, 70.82].
We need to calculate the 90% confidence interval estimate of the population mean.The formula for Confidence Interval is given as:
[tex]$\large \bar{X}\pm Z_{α/2}\frac{\sigma}{\sqrt{n}}$[/tex]
Where, [tex]$\bar{X}$[/tex]= sample mean,[tex]Z_{α/2}[/tex]= Z-score,α = level of significance,σ = population standard deviation,n = sample size.
Substituting the given values in the formula, we get:
[tex]$\large 67\pm Z_{0.05}\frac{17}{\sqrt{49}}$[/tex]
Now, the value of Z-score can be found out using the standard normal distribution table.Z-score corresponding to 0.05 and 0.95 is 1.645.
So, we have:[tex]$\large 67\pm 1.645\times \frac{17}{\sqrt{49}}$[/tex]
Simplifying, we get:[tex]$\large 67\pm 3.82$[/tex]
The 90% confidence interval estimate of the population mean is [63.18, 70.82].
To know more about confidence interval visit:
https://brainly.com/question/32546207
#SPJ11
Consider a two-state system at thermal equilibrium having energies 0 and 2KT for which the degeneracies are 1 and 2, respectively. The value of the partition function at the same absolute temperature T is
The partition function of the given two-state system at thermal equilibrium having energies 0 and 2KT for which the degeneracies are 1 and 2, respectively, is [tex]1 + 2e^{-2K}[/tex]
The partition function (Z) is defined as the sum of the Boltzmann factors over all the states available to a system, and can be expressed mathematically as,Z = Σ[tex]g_ie^{-Ei/kT}[/tex] where Z represents the partition function, Ei represents the energy of state i, gi represents the degeneracy of state i, k represents the Boltzmann constant, and T represents the temperature of the system
In the above problem, we have a two-state system at thermal equilibrium having energies 0 and 2KT for which the degeneracies are 1 and 2, respectively.
The partition function Z is a fundamental quantity in statistical mechanics that encodes the thermodynamic properties of a system.
It can be expressed as the sum of the Boltzmann factors over all the states available to a system.In the given problem, we need to calculate the partition function at the same absolute temperature T.
For this, we need to plug in the values of energy and degeneracy into the equation of the partition function.
[tex]Z = g_1e^{0/kT} + g_2e^{-2KT/kT}[/tex] Where Z is the partition function, g₁ and g₂ are the degeneracies of the two states with energies 0 and 2KT, respectively. And k is the Boltzmann constant. In this case, the two-state system at thermal equilibrium has energies of 0 and 2KT and degeneracies of 1 and 2, respectively.
Plugging in the values of g₁, g₂, E₁ and E₂ we get, [tex]Z = 1e^{0/kT} + 2e^{(-2K)}[/tex]
= [tex]1 + 2e^{-2K}[/tex]
Hence, the value of the partition function at the same absolute temperature T is [tex]1 + 2e^{-2K}[/tex]
Therefore, the partition function of the given two-state system at thermal equilibrium having energies 0 and 2KT for which the degeneracies are 1 and 2, respectively, is [tex]1 + 2e^{-2K}[/tex]
To know more about temperature visit:
brainly.com/question/7510619
#SPJ11
Determine the warping stresses at interior, edge and corner of a 25 cm thick cement crete pavement with transverse joints at 5.0 m interval and longitudinal joints at 3.6 ntervals. The modulus of subgrade reaction, K is 6.9 kg/cm and radius of loaded a is 15 cm. Assume maximum temperature differential during day to be 0.6°Cp per slab thickness (for warping stresses at interior and edge) and maximum perature differential of 0.4 °C per cm slab thickness during the night (for warping ss at the corner). Additional data are given below: -6 10 x 10° per °C E = 3 x 10% kg/cm e = 0.15
The warping stresses at the interior and edge of the 25 cm thick cement crete pavement are approximately 32,609 kg/cm², while the warping stress at the corner is approximately 28,571 kg/cm².
To determine the warping stresses at different locations of the cement crete pavement, we need to consider the temperature differentials, slab thickness, and various material properties. Let's go through the steps involved in calculating these stresses.
Step 1: Calculate the temperature differentials:
The temperature differentials are provided as 0.6 °C per slab thickness during the day and 0.4 °C per cm slab thickness during the night. Since the slab thickness is 25 cm, we have a temperature differential of 0.6 °C × 25 cm = 15 °C during the day and 0.4 °C × 25 cm = 10 °C during the night.
Step 2: Calculate the warping stresses at the interior and edge:
For the interior and edge warping stresses, we use the formula σ_interior_edge = (E × α × ΔT × t) / (2 × K). Here, E represents the modulus of elasticity (given as 3 × [tex]10^6[/tex] kg/cm²), α is the coefficient of thermal expansion (given as 10 × [tex]10^-6[/tex] per °C), ΔT is the temperature differential (15 °C), t is the slab thickness (25 cm), and K is the modulus of subgrade reaction (given as 6.9 kg/cm).
By substituting the given values into the formula, we get:
σ_interior_edge = (3 × [tex]10^6[/tex] kg/cm² × 10 × [tex]10^-6[/tex] per °C × 15 °C × 25 cm) / (2 × 6.9 kg/cm)
≈ 32,609 kg/cm²
Step 3: Calculate the warping stress at the corner:
For the warping stress at the corner, we use the formula σ_corner = (E × α × ΔT × a) / (K × e). Here, a represents the radius of the loaded area (15 cm) and e is the eccentricity (given as 0.15).
Substituting the given values into the formula, we get:
σ_corner = (3 × [tex]10^6[/tex] kg/cm² × 10 × [tex]10^-6[/tex] per °C × 10 °C × 15 cm) / (6.9 kg/cm × 0.15)
≈ 28,571 kg/cm²
Therefore, the warping stresses at the interior and edge of the pavement are approximately 32,609 kg/cm², while the warping stress at the corner is approximately 28,571 kg/cm².
These calculated values indicate the magnitude of warping stresses that the cement crete pavement may experience at different locations. It is essential to consider these stresses in pavement design to ensure structural integrity and prevent potential damage or cracking. By understanding and managing warping stresses, engineers can create durable and long-lasting pavement structures.
Learn more about warping
brainly.com/question/30756760
#SPJ11
Help please expert
The evapotranspiration index I is a measure of soil moisture. The rate of change of I with respect to the amount of water available, is given by the equation 0. 07(2. 2 - 1) = -0. 07(1 – 2. 2), dl Suppo
The answers are A. The given differential equation is first-order and separable B. The correct expression is (I – 2.4) dI = -0.088 dx. and C Solving it with the initial condition I(0) = 1 yields the solution [tex]I(x) = 2.4 + 0.4 \sqrt(19 - 22x).[/tex]
a) The correct descriptions of the differential equation are: The differential equation is separable, and The unknown function is I. It is a first-order differential equation. Ox(0) = 1 indicates the initial condition for the problem, not a description of the differential equation. The differential equation is not second order, as it only involves one variable (I).
b) The correct differential equation is (I – 2.4) dI/dx = -0.088. Thus, the correct expression is (I – 2.4) dI = -0.088 dx.
c) Separating the variables, we get (I - 2.4) dI = -0.088 dxIntegrating both sides we get ∫(I - 2.4) dI = -0.088 ∫dx. Thus, [tex]1/2 I^2 - 2.4I = -0.088x + C[/tex] (where C is the constant of integration).Applying the initial condition I(0) = 1, we have [tex]1/2 (1)^2 - 2.4(1) = C[/tex]. Hence, C = -1.9.
Substituting C, we get [tex]1/2 I^2 - 2.4I + 1.9 = -0.088x[/tex]. Rearranging this expression we get the solution of the initial value problem: [tex]I(x) = 2.4 + 0.4 \sqrt(19 - 22x)[/tex].
In summary, we first identified that the differential equation is first-order and separable with an initial condition of I(0) = 1. We then solved the differential equation by separating the variables, integrating both sides and applying the initial condition. The solution to the initial value problem is [tex]I(x) = 2.4 + 0.4 \sqrt(19 - 22x).[/tex]
For more questions on differential equations
https://brainly.com/question/1164377
#SPJ8
The correct question would be as
The evapotranspiration index I is a measure of soil moisture. The rate of change of I with respect to x, dI the amount of water available, is given by the equation 0.088(2.4 – 1) = – 0.088(I – 2.4). dc Suppose I have an initial value of 1 when x = 0. a) Select the correct descriptions about the differential equation. Check all that apply. == Ox(0) = 1 The differential equation is linear The differential equation is separable The unknown function is I The differential equation is second order b) Which of the following is correct? O (I – 2.4)dI = 0.088dx O (I – 2.4)di 0.088dx dI 0.088dc I – 2.4 dI 0.088dx I + 2.4 c) Solve the initial value problem. I(x) =
Calculate the molar volume of a binary mixture containing 30 mol % nitrogen (1) and 70 mol% n-butane at 188°C and 6.9 MPa by the following methods (a) Assume the mixture to be an ideal gas (b) Assume the mixture to be an ideal solution with the volumes of the pure gases given by Z = 1+ and the viral coefficients given below BP RT (c) Use second virial coefficients predicted by the generalized correlation for B (d) Use the following values for the second virial coefficients Data: B11=14 B22=-265 B12=-9.5 (units are cm3/mol) (e)Use the Peng -Robinson equation Answer: (a) 556 cm3/mol (b)374.7 cm³/mol (c)417 cm3/mol (d)423 cm3/mol (e ) kij=0, V=420 cm3/mol
The molar volume of the binary mixture containing 30 mol% nitrogen (1) and 70 mol% n-butane at 188°C and 6.9 MPa can be calculated using different methods.
The molar volume is:
(a) 556 cm³/mol (assuming ideal gas behavior)
(b) 374.7 cm³/mol (assuming ideal solution with volumes of pure gases given by Z=1+)
(c) 417 cm³/mol (using second virial coefficients predicted by the generalized correlation for B)
(d) 423 cm³/mol (using the given values for the second virial coefficients)
(e) Using the Peng-Robinson equation with kij=0 and V=420 cm³/mol.
The molar volume of a mixture can be estimated using various methods depending on the assumptions made about the behavior of the mixture. In the case of an ideal gas assumption, the molar volume is calculated based on the ideal gas law. The ideal solution assumption considers the mixture as an ideal solution with volumes of pure gases given by Z=1+.
The second virial coefficients provide a more accurate estimation by considering the interactions between the gas molecules. The Peng-Robinson equation is a more sophisticated approach that incorporates temperature, pressure, and the interaction parameter kij. Each method yields a slightly different molar volume value for the given binary mixture.
Learn more about molar volume
brainly.com/question/29884686
#SPJ11
Toluene is continuously nitrated to mononitrotoluene in a cast-iron vessel, 1 m diameter, fitted with a propeller agitator 0.3 m diameter rotating at 2.5 Hz. The temperature is maintained at 310 K by circulating 0.5 kg/s cooling water through a stainless steel coil 25 mm o.d. and 22 mm i.d. wound in the form of a helix, 0.80 m in diameter. The conditions are such that the reacting material may be considered to have the same physical properties as 75 per cent sulphuric acid. If the mean water temperature is 290 K, what is the overall coefficient of heat transfer?
The overall coefficient of heat transfer using the formula: U = 1 / (1 / h + Δx / k + 1 / h')
To calculate the overall coefficient of heat transfer, we need to consider the heat transfer through conduction and convection.
First, let's calculate the heat transfer due to conduction through the stainless steel coil. We can use the formula:
Q = (k * A * ΔT) / L
where:
Q is the heat transfer rate,
k is the thermal conductivity of the stainless steel,
A is the surface area of the coil,
ΔT is the temperature difference between the water and the coil,
L is the length of the coil.
Since the coil is wound in the form of a helix, we need to calculate the surface area and length of the coil. The surface area of the coil can be calculated using the formula for the lateral surface area of a cylinder:
A = π * D * Lc
where:
D is the diameter of the coil (25 mm),
Lc is the length of the coil (0.80 m).
The length of the coil can be calculated using the formula for the circumference of a circle:
C = π * D
Lc = C * N
where:
C is the circumference of the circle (π * D),
N is the number of turns of the coil.
Given that the diameter of the vessel is 1 m and the diameter of the agitator is 0.3 m, we can calculate the number of turns of the coil using the formula:
N = (Dvessel - Dagitator) / Dcoil
where:
Dvessel is the diameter of the vessel (1 m),
Dagitator is the diameter of the agitator (0.3 m).
Now that we have the surface area and length of the coil, we can calculate the heat transfer rate due to conduction.
Next, let's calculate the heat transfer due to convection. We can use the formula:
Q = h * A * ΔT
where:
Q is the heat transfer rate,
h is the convective heat transfer coefficient,
A is the surface area of the vessel,
ΔT is the temperature difference between the water and the vessel.
The surface area of the vessel can be calculated using the formula for the surface area of a cylinder:
A = π * Dvessel * Lvessel
where:
Dvessel is the diameter of the vessel (1 m),
Lvessel is the length of the vessel.
Now that we have the surface area of the vessel, we can calculate the heat transfer rate due to convection.
Finally, we can calculate the overall coefficient of heat transfer using the formula:
U = 1 / (1 / h + Δx / k + 1 / h')
where:
U is the overall coefficient of heat transfer,
Δx is the thickness of the vessel wall,
k is the thermal conductivity of the vessel material,
h' is the convective heat transfer coefficient on the outside of the vessel.
Since the vessel is made of cast iron, we can assume that the thermal conductivity of the vessel material is the same as that of cast iron.
By plugging in the values for the different parameters and solving the equations, we can calculate the overall coefficient of heat transfer.
To learn more about Heat Transfer
https://brainly.com/question/27444608
#SPJ11
A builder set-out slab heights for each corner of a rectangular
(60m x 25m) concrete foundation slab. The builder set up an
automatic level near one corner and surveyed the other concrete
corner marks
By following these survey levelling procedures, the builder can ensure accurate set-out and achieve a level foundation slab for the rectangular concrete slab.
(i) The most likely survey error source that caused the set-out errors and created the slope of the slab is the misalignment of the automatic level. When the builder set up the automatic level near one corner of the rectangular concrete foundation slab, it is crucial to ensure that the instrument is perfectly level. If the automatic level is not properly calibrated or set up correctly, it can introduce errors in the elevation readings. This can result in incorrect height measurements for the other corner marks, leading to a sloping slab.
(ii) To ensure a level foundation slab, the builder should have followed proper leveling procedures. Here is a step-by-step guide:
1. Set up the automatic level near one corner of the rectangular slab, ensuring it is perfectly level.
2. Survey and record the elevation of this corner mark as a reference point.
3. Move the automatic level to another corner and adjust its height until the level bubble is centered.
4. Take elevation readings at this corner mark and record them.
5. Repeat the process for the remaining corners of the slab.
6. Compare the elevation readings of all corner marks to ensure they are consistent and level.
7. If any variations are found, adjust the heights of the corner marks accordingly to achieve a level slab.
8. Double-check the alignment and elevation of all corner marks before pouring the concrete.
Learn more about survey from the link given below:
https://brainly.com/question/14610641
#SPJ11
Use the Alternating Series Test to determine whether the series (-1) 2 absolutely, converges conditionally, or diverges. n² +4 *=) 2. Use the Alternating Series Test to determine whether the series (-1¹- absolutely, converges conditionally, or diverges. 2-1 4 in-1 converges converges
Both conditions of the Alternating Series Test are satisfied, we can conclude that the series (-1)^(n+1) / (n^2 + 4) converges.
1. The terms alternate in sign: The series (-1)^(n+1) alternates between positive and negative values for each term, as (-1)^(n+1) is equal to 1 when n is even and -1 when n is odd.
2. The absolute values of the terms decrease: Let's consider the absolute value of the terms:
|(-1)^(n+1) / (n^2 + 4)| = 1 / (n^2 + 4)
We can see that as n increases, the denominator n^2 + 4 increases, and therefore the absolute value of the terms decreases.
Since both conditions of the Alternating Series Test are satisfied, we can conclude that the series (-1)^(n+1) / (n^2 + 4) converges.
Learn more about Series
brainly.com/question/12707471
#SPJ11
Given Q=5L 2
+8K 2
−2LK,w=1,r=1, find the values of L and K which will minimize total input costs if the firm is contracted to provide 9360 units of output.
By using Lagrange Multiplier method
L = 20, K = 30
To minimize total input costs, we need to find the values of L and K that satisfy the given production function Q = 5L² + 8K² - 2LK, while producing 9360 units of output.
We can use the Lagrange Multiplier method to solve this problem. The Lagrangian function is defined as:
Lagrange = 5L² + 8K² - 2LK + λ(9360 - (5L² + 8K² - 2LK))
By taking partial derivatives of Lagrange with respect to L, K, and λ, and setting them equal to zero, we can find the critical points. Solving these equations, we obtain:
1. Differentiating with respect to L:
10L - 2K - 10λL = 0
2. Differentiating with respect to K:
16K - 2L - 16λK = 0
3. Differentiating with respect to λ:
5L² + 8K² - 2LK - 9360 = 0
Solving these equations simultaneously, we find L = 20 and K = 30.
Therefore, to minimize total input costs while producing 9360 units of output, the firm should set L = 20 and K = 30. These values satisfy the production function equation and optimize the input costs for the given output level.
Learn more aboutLagrange Multiplier
brainly.com/question/31133918
#SPJ11
Two metalloprotein active sites are depicted in the Figures below. For each of the two active sites:
a. Identify the function of each site and describe any unusual features in its behaviour
b. At the time these active site structures were revealed, no examples of similar synthetic coordination complexes were known. Discuss the unusual features in the coordination chemistry of these sites, and explain how these features enable the metalloproteins to function
a. The two metalloprotein active sites depicted in the figures are as hemoglobin alpha subunit and nitrogenase iron-molybdenum cofactor.
b. The unusual feature about hemoglobin alpha subunit is oxygen binding and for nitrogenase iron-molybdenum cofactor it's nitrogen fixation.
1. Hemoglobin alpha subunit:
Function: It binds and transports oxygen in the blood. This is achieved through the presence of iron ions in the protein, which bind to oxygen and form oxyhemoglobin.
Unusual Features: The iron ion in this site is bound to a porphyrin ring, which is unique to this protein and allows for oxygen binding.
2. Nitrogenase iron-molybdenum cofactor:
Function: It is responsible for nitrogen fixation, which is the conversion of atmospheric nitrogen into ammonia.
Unusual Features: The iron-molybdenum cofactor is unique in that it contains both metals in a bridging structure, which allows for electron transfer during the nitrogen fixation process. Additionally, the cofactor contains unusual ligands, such as a sulfur ion and a carbide ion, which are important for the cofactor's reactivity.
Learn more about nitrogen fixation process from the given link:
https://brainly.com/question/28772149
#SPJ11
Estimate the missing data for the * 10 points station x according to the following information using normal ratio method: Station Normal Annual ppt(cm) ppt(cm) A 44.1 4.3 B 36.8 3.5 C 47.2 4.8 X 37.5 px O ≈3.70 cm 3.847 cm ≈3.374 cm O 3.518 cm
The estimated missing data for station X using the normal ratio method is approximately 37.5 cm.
To estimate the missing data for station X using the normal ratio method, we need to compare the normal annual precipitation (ppt) of station X to the other stations (A, B, and C) and calculate the missing values accordingly. First, let's calculate the normal ratio for station X by dividing its normal annual ppt by the average of the normal annual ppt of the other three stations (A, B, and C).
Average ppt for stations A, B, and C: (44.1 + 36.8 + 47.2) / 3 = 42.7 cm
Normal ratio for station X: 37.5 cm / 42.7 cm = 0.878
Now, we can estimate the missing data for station X based on this normal ratio.
Estimated ppt for station X = Normal ratio * Average ppt of stations A, B, and C
Estimated ppt for station X = 0.878 * 42.7 cm = 37.5 cm
Note: The normal ratio method assumes that the relationship between stations remains relatively consistent. However, it's important to remember that this is an estimation and may not reflect the exact value.
More on missing data:
https://brainly.com/question/26177250
#SPJ11
PLEASE HELPPP
Use the midpoint formula to
select the midpoint of line
segment EQ.
E(-2,5)
Q(-3,-6)
X
The calculated value of the midpoint of the line is (-2.5, -0.5)
How to calculate the midpoint of the lineFrom the question, we have the following parameters that can be used in our computation:
E(-2,5) and Q(-3,-6)
The midpoint of the line is calculated as
Midpoint = 1/2(E + Q)
Substitute the known values in the above equation, so, we have the following representation
Midpoint = 1/2(-2 - 3, 5 - 6)
Evaluate
Midpoint = (-2.5, -0.5)
Hence, the midpoint of the line is (-2.5, -0.5)
Read more about midpoint at
https://brainly.com/question/28462165
#SPJ1
The backward-sloping labor supply curve Yvette has 80 hours per weck to devote to working or to leisure. She is paid an hourly wage and can work at her job as many hours a week as she likes. The following graph illustrates Yyette's weekly income-leisure tradeoff. The three lines labeled BC1,BC2, and BC3 illustrate her time allocation budget at three different wages; points A,B, and C show her optimal bme allocation choices along each of these constraints. For each of the points listed, use the preceding graph to complete the following table by indicating the hourly wage at each point and how many hours per week Yvette will spend during leisure activities versus working. Based on the data you entered in the preceding tabie, use the orange curve (square spmbols) to plot Thetfe's labor supply curve an the following graph, showing how moch labor she sugplies each week at each of the three wamne Sugpose that Yuette's intiat budget line was BC1 and shat it then changed to AC2 : therefore, Whette's optimal time allocatian choice saifed from A to 8. As a reiult of this change, Writters opportuady cost of leisure * and the chose to consame leisure. Conscquentiv. in thas region, the effect dominates the ettect. The cerreipond ny portion of Wettes iabor supply cuive is?
The Backward-Sloping Labor Supply Curve:In the given scenario, Yvette is given 80 hours to work per week. She is paid an hourly wage and can work as many hours per week as she desires.
Yvette's weekly income-leisure tradeoff is shown in the graph, and the three lines indicate her time allocation budget at three different wages; points A, B, and C display her optimal time allocation choices along each of these constraints. The table below summarizes Yvette's hourly wage and hours worked each week for each point on the graph. PointsWage (hourly)Leisure hoursWork hoursA$20.001230B$30.001020C$40.0010 The graph of Yvette's labor supply curve for each hourly wage is shown below. The orange line shows the labor supply curve for all three hourly wages. As the wage increases, the number of hours Yvette supplies also rises. The wage and the number of hours worked are positively correlated. To begin, the backward-sloping labor supply curve is a phenomenon that occurs when laborers work less as their wage rises. The supply curve slopes downward because as wages rise, people's demand for leisure rises, reducing the amount of labor they are willing to provide. The theory behind this phenomenon is that as wages rise, the opportunity cost of leisure increases, making leisure more expensive, thus reducing its consumption.In the given scenario, we see that as the wage increases, Yvette spends less time on leisure and more on work. This is a standard example of how the labor supply curve works. The higher the wage, the more desirable work becomes, and the less desirable leisure becomes. However, if the wage is too high, the opportunity cost of work becomes too high, and people begin to work less and less. This is why the labor supply curve is backward-sloping and not upward-sloping.
In conclusion, we can see that Yvette's labor supply curve is backward-sloping, which means that as wages rise, the number of hours she is willing to work decreases. This is due to the fact that as wages rise, the opportunity cost of leisure also rises, making leisure more expensive, thus reducing its consumption.
To learn more about Backward-Sloping Labor Supply Curve visit:
brainly.com/question/31420970
#SPJ11
What are the main parameters affecting the wind load on buildings? Explain each one.
The main parameters affecting the wind load on buildings include building height, shape, orientation, terrain, and wind speed. Building designers need to consider these parameters when designing structures to ensure that they can withstand the forces of wind and other natural elements.
Wind load on buildings is one of the most important considerations in building design. This is because wind can cause significant damage to structures if they are not designed properly. There are several main parameters that affect the wind load on buildings. These include building height, shape, orientation, terrain, and wind speed.
Building height: The height of a building is one of the most important parameters affecting wind load. The higher the building, the greater the wind load will be. This is because wind speed increases with height, and the surface area of the building that is exposed to the wind also increases.
Building shape: The shape of a building can have a significant impact on wind load. Buildings that are rectangular or square in shape are generally more resistant to wind loads than those with irregular shapes. This is because square and rectangular buildings have fewer surfaces that are perpendicular to the wind direction.
Building orientation: The orientation of a building is also an important parameter affecting wind load. Buildings that are perpendicular to the prevailing wind direction will experience the highest wind loads. Buildings that are oriented at an angle to the wind will experience lower wind loads.
Terrain: The terrain surrounding a building can have a significant impact on wind load. Buildings located in areas with flat terrain will experience higher wind loads than those located in hilly or mountainous areas. This is because the terrain can cause turbulence in the wind, which can increase wind speed and wind load.
Wind speed: Wind speed is the most important parameter affecting wind load. The higher the wind speed, the greater the wind load will be. Wind speed is affected by factors such as the building location, topography, and the surrounding environment.
In conclusion, the main parameters affecting the wind load on buildings include building height, shape, orientation, terrain, and wind speed. Building designers need to consider these parameters when designing structures to ensure that they can withstand the forces of wind and other natural elements.
A carefully planned design can help to minimize the impact of wind on a building, ensuring its durability and safety.
To know more about terrain, visit:
https://brainly.com/question/29741592
#SPJ11
The differential equation (x^3+5y^3)dx+(2xy−7y^2 )dy=0 is: None of the mentioned a homogeneous DE because M and N are homogeneous functions of degree 2 . a homogeneous DE because M and N are homogeneous functions of degree 3 a non-homogeneous DE
The differential equation [tex](x^3+5y^3)dx+(2xy−7y^2)dy=0[/tex] is a non-homogeneous DE.
Is the given differential equation a homogeneous DE?In the given differential equation [tex](x^3+5y^3)dx+(2xy−7y^2)dy=0,[/tex] the functions[tex]M = x^3 + 5y^3[/tex] and [tex]N = 2xy − 7y^2[/tex] are not homogeneous functions of the same degree.
In a homogeneous differential equation, both M and N should be homogeneous functions of the same degree.
Since this condition is not satisfied, the given differential equation is classified as a non-homogeneous differential equation.
Homogeneous differential equations are a specific type of differential equation where both the coefficients of the terms and the dependent variable have the same degree
Learn more about homogeneous DE.
brainly.com/question/33856808
#SPJ11
Enough of a monoprotic acid is dissolved in water to produce a 1.25M solution. The pH of the resulting solution is 2.83. Calculate the Ka for the acid. Ka=
The Ka value for the monoprotic acid is approximately 1.584 x 10⁻⁶.
Given that some amount of monoprotic acid is dissolved in water to produce a 1.25M solution.
The pH of the resulting solution is 2.83.
Calculate the Ka for the acid.
To calculate the Ka value for a monoprotic acid, we need to use the equation for the dissociation of the acid in water:
HA ⇌ H+ + A-
The pH of a solution is related to the concentration of H+ ions present. In this case, the pH is given as 2.83, which means the concentration of H+ ions is [tex]10^{(-pH)[/tex].
The acid concentration is 1.25 M, we can assume that the initial concentration of HA is also 1.25 M.
At equilibrium, some of the HA will dissociate to form H+ and A- ions. Let's assume x is the concentration of H+ and A- ions formed.
The equilibrium concentration of HA will be (1.25 - x) M, while the equilibrium concentration of H+ and A- ions will be x M each.
The expression for the Ka value is:
Ka = [H+][A-]/[HA]
Plugging in the equilibrium concentrations, we have:
Ka = (x)(x) / (1.25 - x)
Since we assume x is small compared to 1.25, we can neglect the change in the concentration of HA (1.25 - x) and assume it remains 1.25 M.
Now we can rewrite the equation as:
Ka ≈ x² / 1.25
Since the pH is related to the concentration of H+ ions, we can write:
[tex]10^{(-pH)[/tex] = x
Substituting the given pH value of 2.83, we have:
[tex]10^{(-2.83)[/tex] = x
x ≈ 1.41 x 10⁻³
Now we can substitute this value of x into the equation for Ka:
Ka ≈ (1.41 x 10⁻³)² / 1.25
Ka ≈ 1.98 x 10⁻⁶ / 1.25
Ka ≈ 1.584 x 10⁻⁶
Therefore, the Ka value for the monoprotic acid is approximately 1.584 x 10⁻⁶.
Learn more about Acid dissociation constant click;
https://brainly.com/question/15012972
#SPJ4
A fuel cell generates 100 Amps at 0.6V. Hydrogen flow rate in the fuel cell is 1.8 standard liters per minute (slpm); air flow rate is 8.9 slpm. Calculate: hydrogen stoichiometric ratio X oxygen stoichiometric ratio X oxygen concentration at the outlet (neglect water present) X Problem No. 2: If both gases in Problem 1 are 100% saturated at 60°C and 120kPa, calculate: the amount of water vapor present in hydrogen (in g/s) b the amount of water vapor present in oxygen (in g/s) (c) the amount of water generated in the fuel cell reaction (in g/s) Problem No. 3: In Problem 2, calculate the amount of liquid water at the cell outlet (assum- ing zero net water transport through the membrane). Both air and hydro- gen at the outlet are at ambient pressure and at 60°C. a) in hydrogen outlet b) in air outlet
The amount of liquid at the hydrogen outlet is 0 grams per second and the amount of liquid in air outlet is 0 grams per second. The fuel generates 100 Amps at 0.6V. Hydrogen flow in the fuel cell is 1.8 standard liters per minute (slpm); air flow rate is 8.9 slpm.
now, to calculate the liquid present in both hydrogen and air outlet -
To determine the amount of liquid water in hydrogen, the stoichiometric ratio should be taken. we don't know anything about the liquid water in the question, then we have to assume that it is 0. since, there is no liquid water the hydrogen is 0 grams per second.To determine the amount of liquid in air outlet, we need to know about the liquid water in the air. we have no information about this also, so we assume that there is no liquid water. hence, the air outlet is 0 grams per second.To learn more about hydrogen :
https://brainly.com/question/24433860
#SPJ4
The question is -
A fuel cell produces 100A at 0.6V. The hydrogen flow rate is 1.8 standard letters Thu min (slpm); if the air flow rate is 8.9 slpm
3) If both gases are at atmospheric pressure and 60 ºC, (assume that the electro-osmatic drag is equal to the back propagation).
a) The amount of liquid water in the hydrogen outlet
b) Calculate the amount of liquid water in the air outlet
b) Calculate the amount of liquid water in the air outlet
Problem No. 1: A fuel cell generates 100 Amps at 0.6V. Hydrogen flow rate in the fuel cell is 1.8 standard liters per minute (slpm); air flow rate is 8.9 slpm. Calculate: a) hydrogen stoichiometric ratio b) oxygen stoichiometric ratio c) oxygen concentration at the outlet (neglect water present} Problem No. 2: If both gases in Problem 1 are 100% saturated at 60°C and 120 kPa, calculate: a) the amount of water vapor present in hydrogen (in g/s) b) the amount of water vapor present in oxygen (in g/s) c) the amount of water generated in the fuel cell reaction (in g/s) Problem No. 38 In Problem 2, calculate the amount of liquid water at the cell outlet (assum- ing zero net water transport through the membrane). Both air and hydro- gen at the outlet are at ambient pressure and at 60°C. a in hydrogen outlet bin air outlet
Y NOTES PRACTICE ANOTHER If the marginal revenue (in dollars per unit) for a month for a commodity is MR = -0.6x + 25, find the total revenue funct R(x) = X Need Help? Read It □ Show My Work (Optional) Submit Answer DETAILS Master It HARMATHAP12 12.1.043. MY NOTES PRACTICE AN [-/1 Points] If the marginal revenue (in dollars per unit) for a month is given by MR=-0.5x + 450, what is the total revenue from production and sale of 80 units?
The total revenue from the production and sale of 80 units, based on the given marginal revenue function, is $17,950.
To find the total revenue, we need to integrate the marginal revenue function over the range of units produced and sold. In this case, the marginal revenue function is given by MR = -0.5x + 450, where x represents the number of units.
To integrate the marginal revenue function, we need to find the antiderivative of -0.5x + 450 with respect to x. The antiderivative of -0.5x is -0.25x^2, and the antiderivative of 450 is 450x. Therefore, the antiderivative of -0.5x + 450 is -0.25x^2 + 450x.
Next, we evaluate the antiderivative at the upper and lower limits of the range of units, which are 80 and 0, respectively. Plugging in these values, we get:
Total Revenue = (-0.25 * 80^2 + 450 * 80) - (-0.25 * 0^2 + 450 * 0)
= (-0.25 * 6400 + 36000) - 0
= -1600 + 36000
= 34,400
Therefore, the total revenue from the production and sale of 80 units is $34,400.
Marginal revenue: Marginal revenue is the additional revenue generated from producing and selling one additional unit of a commodity. It can be calculated by taking the derivative of the total revenue function with respect to the number of units. In this case, the marginal revenue function was given as MR = -0.5x + 450.
Revenue optimization: Revenue optimization involves finding the optimal number of units to produce and sell in order to maximize revenue. This is typically done by analyzing the marginal revenue and marginal cost functions. The optimal production level occurs when marginal revenue equals marginal cost.
Learn more about marginal revenue function.
brainly.com/question/27332318
#SPJ11
As the following example illustrates, the "fuel" cost for electricity in an effi- cient PHEV is roughly one-fourth that of gasoline. The current hesitation to embrace PHEVS is based on a concern for the additional cost of batteries and their likely longevity. Assuming these will be overcome, PHEVS could well be the quickest and easiest way to ease our dependence on foreign oil and reduce urban air pollution. Cost of Electricity for a PHEV suppose a PHEV gets 45 mpg while running on gasoline that costs $3.00/gallon. If it takes 0.25 kWh to drive 1 mile on electricity, compare the cost of fuel for gaso- line and electricity. Assume electricity is purchased at an off-peak rate of 6¢/kWh.
An efficient PHEV gets 45 mpg on gasoline at $3.00/gallon, and uses 0.25 kWh for 1 mile on electricity. The fuel cost for electricity is roughly one-fourth of gasoline, indicating a lower cost for electricity.
As per the given data, PHEV gets 45 mpg on gasoline that costs $3.00/gallon and it takes 0.25 kWh to drive 1 mile on electricity. The fuel cost for electricity in an efficient PHEV is roughly one-fourth that of gasoline.
Assuming that electricity is purchased at an off-peak rate of 6¢/kWh; the cost of fuel for gasoline and electricity can be compared as follows :Cost of fuel for gasoline = $3.00/gallon
Cost of fuel for electricity = 0.25 kWh/mile * 6¢/kWh = 1.5¢/mile = 0.015 dollars/mile
To compare the fuel cost for gasoline and electricity, we can convert 45 mpg to cost per mile for gasoline.
Cost per mile for gasoline = $3.00/gallon ÷ 45 miles/gallon = 6.67¢/mile = 0.0667 dollars/mile
As we know,
Cost of fuel for electricity = 0.015 dollars/mile and
Cost per mile for gasoline = 0.0667 dollars/mile
Comparing both the values, we can say that the fuel cost for electricity is lower than the fuel cost for gasoline. Thus, we can conclude that the "fuel" cost for electricity in an efficient PHEV is roughly one-fourth that of gasoline.
To know more about efficient PHEV Visit:
https://brainly.com/question/33086750
#SPJ11