he tapes the edge with special tape.how much tape will each coaster required

The probability of drawing exactly four red balls when drawing six balls from three urns, each with 6 red balls, 3 brown balls, and 8 purple balls is 0.3147 or 31.47%.

The probability of drawing exactly four red balls when drawing six balls from three urns, each with 6 red balls, 3 brown balls, and 8 purple balls is calculated using the following equation:

P(4 red balls) = (6C4) × (3C2) × (8C0)/(17C6)

Where C denotes the combination and the denominator represents the total possible outcomes.

In this case, the numerator consists of three parts, the first being the combination of four red balls from the first urn (6C4) where 6 represents the total number of red balls, and 4 represents the number of red balls chosen. The second part is the combination of two brown balls from the second urn (3C2) where 3 is the total number of brown balls, and 2 is the number of brown balls chosen. The last part is the combination of zero purple balls from the third urn (8C0) where 8 is the total number of purple balls and 0 is the number of purple balls chosen.

Finally, the denominator represents the total number of possible outcomes when drawing 6 balls from 17 balls (17C6) where 17 is the total number of balls, and 6 is the total number of balls drawn.

The probability of drawing four red balls is 0.3147 or 31.47%.

Therefore, the probability of drawing exactly four red balls when drawing six balls from three urns, each with 6 red balls, 3 brown balls, and 8 purple balls is 0.3147 or 31.47%.

See more about probability at: https://brainly.com/question/14633532

#SPJ11

12

Yes, it is possible to calculate the length of the altitude to the other side of the triangle. To do so, use the Pythagorean Theorem, which states that in a right triangle, the square of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides.

In this triangle, the hypotenuse is the side of length 13 and the other two sides are the side of length 5 and the altitude to it. So, the equation to use is:

132 = 52 + altitude2

Solving for altitude gives:

altitude2 = 132 - 52

altitude2 = 169 - 25

altitude2 = 144

altitude = √144 = 12

Therefore, the length of the altitude to the side of the triangle with length 13 is 12.

Learn more about Pythagorean Theorem.

brainly.com/question/14930619

#SPJ11

From the given information provided, the value of the expression (-14⁰)⁻²

is 1 that is option d.

We need to follow the order of operations, which is to evaluate any exponents first, before performing any other operations.

Exponent rules are mathematical rules that describe how to simplify expressions that involve exponents.

(-14⁰)⁻² can be simplified as follows:

(-14⁰)⁻² = (-1)⁰ × 14⁰ × (-1)⁻² [Using the rule ([tex]a^m[/tex])ⁿ = [tex]a^(m*n)[/tex]]

(-14⁰)⁻² = 1 × 1 × 1/(-1)⁻² [Using the rule a⁰ = 1]

(-14⁰)⁻² = 1 × 1 × 1/1

(-14⁰)⁻² = 1

Therefore, the value of (-14⁰)⁻² is 1. Answer: d) 1

Learn more about exponent here: brainly.com/question/11975096

#SPJ4

Answer:

x = 26.

Step-by-step explanation:

Given: 2x + 3x + 50 = 180

First, write it down:

2x + 3x + 50 = 180

Then, collect like terms:

2x + 3x = 180 - 50

Then calculate:

5x = 130  (Divide both sides by 5)

x = 26

The expression 3x³y² - 9xz⁴ + 8y²z have no GCF greatest common factor but the terms 3x³y² and 8y²z have GCF equal to y².

The GCF defines the highest common factor present in between given two or more numbers or algebraic expressions.

we shall determine the GCF greatest common factor for the algebraic expression 3x³y² and 8y²z as follows:

3x³y² = y² × 3x³

8y²z = y² × 8z

both terms 3x³y² and 8y²z have y² common to them, so we can write;

3x³y² + 8y²z = y² × 3x³ + y² × 8z

3x³y² + 8y²z = y²(3x³ + 8z)

In conclusion, the expression 3x³y² - 9xz⁴ + 8y²z have no GCF greatest common factor but the terms 3x³y² and 8y²z have GCF equal to y².

Know more about GCF here:https://brainly.com/question/21504246

#SPJ1

13.0% of kci by a mass of a solution of 2 moles of kci dissolved in 1 litres of pure water

To find the percent of KCI in a solution of 2 moles of KCI dissolved in 1 liter of pure water (H2O), we first need to calculate the molar mass of KCI.

Molar mass of KCI = atomic mass of K + atomic mass of Cl = 39 + 35.5 = 74.5 g/mol

Next, we need to calculate the mass of KCI in the solution using the formula:

mass = moles x molar mass

mass of KCI

= 2 moles x 74.5 g/mol

= 149 g

Finally, we can calculate the percent of KCI in the solution using the formula:

percent of KCI = (mass of KCI / total mass of solution) x 100%

The total mass of the solution is equal to the mass of KCI plus the mass of water, which is:

total mass of solution

= 149 g + 1000 g

= 1149 g

So, the percent of KCI in the solution is:

percent of KCI

= (149 g / 1149 g) x 100%

= 12.96%

Rounding to one decimal place, the percent of KCI in the solution is approximately 13.0%.

To learn more about percent click here

brainly.com/question/1987628

#SPJ1

The difference between cardinality and join type is that cardinality describes the relationship between two data tables, while join type is the specific method used to combine the two tables.

Cardinality defines the maximum number of records that can exist in one table for a relationship with another table. Cardinality can be either one-to-one, one-to-many, or many-to-many.

A one-to-many cardinality relationship is when one record in one table can be related to multiple records in another table. For example, a customer can have multiple orders. In this situation, a one-to-one join type is often used because it is the most efficient way to retrieve the related data. This is because one-to-one join type only requires that one record be searched, while a one-to-many join type would require that multiple records be searched in order to find the related records. Additionally, a one-to-one join type ensures that no duplicate records will be returned in the result.

In summary, cardinality describes the relationship between two tables while join type is the specific method used to combine the two tables. A one-to-many cardinality relationship is when one record in one table can be related to multiple records in another table. To efficiently retrieve the related data, a one-to-one join type is often used. This is because it only requires that one record be searched and it ensures that no duplicate records will be returned in the result.

To know more about cardinality refer here:

https://brainly.com/question/29093097

#SPJ11

Answer:

5

Step-by-step explanation:

To find the slope, we will use this equation.

[tex]\frac{y_{2} - y_{1} }{x_{2} - x_{1} } = m[/tex]

m = slope

When we plug in the values of y2, y1, x2, and x1, we get this:

[tex]\frac{2-7}{2-3} = m[/tex]

when we simplify:

[tex]\frac{-5}{-1}[/tex]

-5 / -1 = 5 / 1 = 5

The slope is 5.

Answer:

Send a proper picture, the fifth point is not visible.

A right circular cylinder can be generated by rotating a rectangle of perimeter p about one of its sides. The dimensions of the rectangle that will generate the cylinder of max volume are l = p/6 and w = p/2 - l = 2p/3.

Explanation: Let l and w be the dimensions of the rectangle of perimeter p.

That is, the rectangle's perimeter is given by p = 2l + 2w or p/2 = l + w. Therefore, the width w = p/2 - l. The area of the rectangle is given by lw. When the rectangle is rotated around the side of length w, it generates a cylinder of height l and radius w.

The volume of the cylinder is given by V = πr²h = πw²l. Substituting w = p/2 - l, we obtain V = π(p/2 - l)²l = π(p/2)²l - 2π(p/2)l² + πl³.

The volume function can be obtained by differentiating V with respect to l, setting the derivative equal to 0, and solving for l. The derivative of V with respect to l is given by dV/dl = π(p/2)² - 4π(p/2)l + 3πl².

Setting dV/dl = 0 and solving for l, we obtain l = p/6.The dimensions of the rectangle that will generate the cylinder of max volume are l = p/6 and w = p/2 - l = 2p/3.

To know more about max volume: https://brainly.com/question/28950621

#SPJ11

In the given triangle, using angle bisectοr theοrem, the value οf the variable is 8.

A triangle is a pοlygοn with three edges and three vertices. It belοngs tο the basic geοmetric shapes. A triangle with the parts A, B, and C is referred tο as triangle ABC. Any three pοints that are nοt cοllinear in Euclidean geοmetry result in a separate triangle and a distinct plane.

The angle bisectοr theοrem in mathematics is cοncerned with the prοpοrtiοns οf the twο segments that a line that bisects the οppοsite angle divides a triangle's side intο. It cοmpares their prοpοrtiοnal lengths tο the prοpοrtiοnal lengths οf the triangle's οther twο sides.

In the given triangle, using angle bisectοr Theοrem,

36/28 = q/(16-q)

On sοlving, we get

q = 9

To know more about angle bisectors, visit

brainly.com/question/12896755

#SPJ1

Considering the two secant theorem, the measure of the far arc x is given as follows:

x = 104º.

The two secant theorem states that if two secant lines intersect outside a circle, then the measure of the angle of intersection of the two secant lines is obtained as the difference between the measure of the far arc and the measure of the near arc, divided by two.

Hence the equation to obtain the measure of the angle of intersection is given as follows:

y = (far arc - near arc)/2.

The parameters for this problem are given as follows:

Hence the measure of the far arc x is obtained as follows:

(x - 44)/2 = 30

x - 44 = 60

x = 44 + 60

x = 104º.

More can be learned about the two-secant theorem at https://brainly.com/question/26340897

#SPJ1

Answer: C. 12 inches

Step-by-step explanation: Let's use the formula for the volume of a cylinder, which is:

V = πr^2h

where V is the volume, r is the radius, and h is the height.

We ar given that the length of the radius is twice the height, which can be written as:

r = 2h

We are also given the volume of the cylinder, which is 864 cubic inches. Substituting the given values, we get:

864 = π(2h)^2h

Simplifying and solving for h:

864 =4πh^3

h^3 = 864/(4π)

h = 6

Now that we know the height of the cylinder is 6 inches, we can find the radius using the equation r = 2h:

r = 2(6) = 12 inches

Therefore, the length of the radius of the cylinder is 12 inches, which is option C.

The maximum value of f on the given region is 9 and the minimum value of f is 25.

In plainer terms, a function creates an output in response to an input. As an illustration, the formula f(x) = x2 takes the input value x, squares it, and outputs the square of x. The set of all potential output values is referred to as the range, while the set of input values that can be employed with a specific function is referred to as the domain.

In order to simulate real-world processes and make predictions, functions are frequently employed in mathematics, physics, engineering, and many other disciplines. They can be represented by mathematical equations, tables, or graphs, and can take on a variety of shapes, such as linear, quadratic, exponential, trigonometric, and many more.

We need to find the extreme values of the function f(x,y) subject to the constraint x² + y² <= 16. We can use the method of Lagrange multipliers to solve this problem.

Let g(x,y) = x² + y² - 16, then the Lagrangian function is given by:

L(x,y,λ) = f(x,y) - λg(x,y)

= 2x² + 3y² - 4x - 7 - λ(x² + y² - 16)

Taking partial derivatives of L(x,y,λ) with respect to x, y and λ, and equating them to zero, we get:

∂L/∂x = 4x - 4λx = 0

∂L/∂y = 6y - 4λy = 0

∂L/∂λ = x² + y² - 16 = 0

Solving these equations, we get two critical points:

(2/λ, 0, λ) and (-2/λ, 0, λ)

To find the extreme values of f, we need to evaluate f at these critical points and at the boundary of the region x² + y² = 16.

At the critical points, we have:

f(2/λ, 0) = -7 - 16λ/3

f(-2/λ, 0) = -7 - 16λ/3

At the boundary, we have:

f(x,y) = 2x² + 3y² - 4x - 7

= 2x² + 3(16 - x²) - 4x - 7 (substituting y² = 16 - x²)

= -x² - 4x + 41

To find the extreme values, we need to compare the values of f at these points:

f(2/λ, 0) = f(-2/λ, 0) = -7 - 16λ/3

f(x,y) = -x² - 4x + 41

Now, we need to find the maximum and minimum values of f on the given region. Since the coefficient of x² is negative, the maximum value of f occurs at the boundary of the region, where x = ±4. Therefore, the maximum value of f is:

f(4,0) = -4² - 4(4) + 41 = 9

To find the minimum value of f, we need to compare the values of f at the critical points and the boundary. Since the coefficient of x² is negative, we can see that f(2/λ, 0) and f(-2/λ, 0) approach -∞ as λ → 0. Therefore, the minimum value of f occurs at the boundary of the region, where x = ±4. Therefore, the minimum value of f is:

f(-4,0) = -(-4)² - 4(-4) + 41 = 25

Hence, the maximum value of f on the given region is 9 and the minimum value of f is 25.

To know more about coefficient visit:

https://brainly.com/question/12914312

#SPJ1

The transformation that would not result in a congruent figure when performed on triangle RST is A. A dilation by a scale factor of 2 with respect to point R.

The equation that has the same solution as the system of equations is C. 4x + 9y = 10

4x + 6y = 24.

Transformations that change the shape or size of a figure can change its congruency.  A dilation is a transformation that changes the size of a figure so this would mean that RST dilated would not result in a congruent figure.

When the system of equations, 4x + 9y = 10, 2x + 3y = 12 is solved, we find that x = 13 and y = - 14/ 3.

Options A,B, and D cannot have the same value because the numbers are the same and so they should have different values., Only option C can be the same and when the values are slotted in, this is proven.

Option C, 4x + 9y = 10 , 4x + 6y = 24 is therefore correct.

Find out more on equations at https://brainly.com/question/25869125

#SPJ1

In the bridge, when the south has 13 points and 3 clubs and bids 1 club, the north responding with 3 clubs means that the North has a strong hand with six or more clubs.

In the game of bridge, bidding is a method of indicating the strength of a player's hand, which is the number of tricks that they believe they can win if they become the declarer. Every player has to declare their abilities based on the bid of the previous player when it is their turn to bid.

The bidding starts with the dealer and proceeds in a clockwise direction. The players can either make a bid or pass. The following are the four basic bids in Bridge:

When South has 13 points and 3 clubs, he makes a 1 Club bid. This bid can be interpreted as follows:

South has a strong hand with five or more clubs and 13 to 21 high card points. When South bids 1 Club, he implies that he has a balanced hand, which means that he has four cards in each suit, or an unbalanced hand, which means that he has a long suit, a singleton, or a void in some other suit.

When North responds with 3 Clubs, it means that he has a strong hand with six or more clubs. North has understood that South has five or more clubs and therefore responds with the number of clubs that he has in his hand to show that he is strong enough to support South's suit. Thus, North is trying to force South to become the declarer in clubs.

You can learn more about South and North at: brainly.com/question/14584157

#SPJ11

Answer:

8;-2

Step-by-step explanation:

8 is the x axis and -2 is the y axis

Answer:

Step-by-step explanation:

The car was travelling with the speed of 183.5 mph when the brakes were applied.

The pace at which an object travels a certain distance can be described using the speed formula. The distance that a body travels in a certain amount of time is a common way to measure speed. M/s is the SI unit of speed. We will learn more about the speed formula and its uses in this section.

Let's continue and investigate the speed formula in this part in more detail. Speed can be expressed in a variety of ways, including m/s, km/hr, miles/hr, etc. [LT-1] is the dimensional formula for speed. A body's speed may be defined as how quickly it is going. The equation for a given body's speed may be written as,

Speed = Distance ÷ Time

We have the equation,

[tex]s=\frac{\sqrt{d} }{0.04}[/tex]

we have the value of d as 54

putting the value pf d in the equation we get,

[tex]s=\frac{\sqrt{54} }{0.04}[/tex]

s = 7.34/0.04

s = 183.5 mph

So the car was travelling with the speed of 183.5 mph when the brakes were applied.

Learn more about Car speed problems:

https://brainly.com/question/13325695

#SPJ4

Complete question:

The speed that a vehicle was traveling, s, in miles per hour, when the brakes were first applied, can be estimated using the formula

[tex]s=\frac{\sqrt{d} }{0.04}[/tex] where d is the length of the vehicle's skid marks, in feet.

if skid marks on dry concrete are 54 feet long, how fast was the car traveling when the brakes were applied?

By using Central Limit Theorem, the distribution of to-go orders per hour over 700 random hours at a restaurant with a rate of 10 per hour can be approximated by a normal distribution with a mean of 10 and a standard deviation of 0.119.

The distribution of the average number of to-go orders per hour over 700 random hours can be approximated by the Central Limit Theorem (CLT). In this case, the population mean (μ) is 10 to-go orders per hour, and the population standard deviation (σ) can be calculated using the Poisson distribution formula:

σ = sqrt(μ) = sqrt(10) ≈ 3.162

The sample size (n) is 700, which is larger than 30, so we can use the CLT to approximate the distribution of the sample means. The mean of the sample means is equal to the population mean, which is 10 to-go orders per hour. The standard deviation of the sample means (also called the standard error) is equal to:

SE = σ / sqrt(n) = 3.162 / sqrt(700) ≈ 0.119

Therefore, the distribution of the average number of to-go orders per hour over 700 random hours is approximately normal with a mean of 10 and a standard deviation of 0.119

To know more about Central Limit Theorem:

https://brainly.com/question/898534

#SPJ4

Answer:

15 degrees,45 degrees, 120 degrees respectively

Step-by-step explanation: TO begin with total=1+3+8=12

1:3:8=12

1/12*180=15

3/12*180=45

8/12*180=120

Answer:

A

Step-by-step explanation:

Answer:

For problem a: 0,4 0,5 0,6

For Problem B: 1,0 2,0 3,0

Step-by-step explanation:

Graph each equation on a graph Figure out either solid or dotted line. Then depending on <=,<,>,>= is whre you shade on your graph. The spot where both lines meet when shaded is your solution area and you pick any spot on that. You can check your answer by plugging in ordered pairs for your X,Y values in the system.

Answer:

20- gon

Step-by-step explanation:

the sum of the interior angles of a polygon is

sum = 180° (n - 2) ← n is the number of sides

given the sum of the interior angles is  3240° , then

180° (n - 2) = 3240 ( divide both sides by 180° )

n - 2 = 18 ( add 2 to both sides )

n = 20

then the polygon is a 20- gon

(a) Since I cannot draw boxplots in text, I recommend using a boxplot tool, such as a graphing calculator, Excel, or an online boxplot generator. Input the data for each brand and create side-by-side boxplots, labeling them "N" for the name brand and "S" for the store brand.

(b) To determine if there is a difference in the number of chips per cookie between the two brands, compare the median values, the range, and the interquartile range of each brand's boxplot. If these values differ significantly, then there is a difference in the number of chips per cookie between the two brands.

(c) To determine which brand has a more consistent number of chips per cookie, compare the interquartile ranges (IQR) of each brand's boxplot. The brand with the smaller IQR has a more consistent number of chips per cookie, as the IQR measures the spread of the middle 50% of the data.

for such more questions on interquartile range

https://brainly.com/question/4102829

#SPJ11

Answer:

Step-by-step explanation:

If there are ten families and exactly two of them are childless, then there are 10 - 2 = 8 families with children.

The total number of children in these families is 8 x 2 = 16.

Therefore, the average number of children in the families with children is:

16 / 8 = 2

So the average number of children in the families with children is 2.0 (to the nearest tenth).

The average number of children in the families with children is 2.2.

To calculate this, first we need to determine the total number of children in the ten families. Since each family has an average of 2 children, this means that the total number of children in the ten families is 10 x 2 = 20.

Since two of these families are childless, this means that the total number of children in the remaining 8 families is 20 – 0 = 20.

Now, we need to determine the average number of children in the 8 families with children. To do this, we divide the total number of children (20) by the number of families with children (8):

20/8 = 2.5

Finally, we express the answer to the nearest tenth, which is 2.2.

In conclusion, the average number of children in the families with children is 2.2.

See more about average at: https://brainly.com/question/29446052

#SPJ11

For N and K to be independent, the joint probability mass function should factorize into the product of the marginal probability mass functions:

P(N=n,K=k) = P(N=n) * P(K=k)If this condition is not satisfied, then N and K are dependent.

The distribution of K given that N=2 can be calculated using the conditional probability formula:

P(K=k|N=2) = P(K=k and N=2) / P(N=2)

Let X be the outcome of the coin flip. Then the joint probability mass function of N and K can be expressed as:

P(N=n,K=k) = P(X=0) for n=0 and k=0

P(N=n,K=k) = P(X=1) for n=1 and k=0, 1

P(N=n,K=k) = P(X=2) for n=2 and k=0, 1, 2

P(N=n,K=k) = P(X=3) for n=3 and k=0, 1, 2

The marginal probability mass function of N can be obtained by summing over all possible values of K:

P(N=n) = P(N=n,K=0) + P(N=n,K=1) + P(N=n,K=2)

The marginal probability mass function of K can be obtained by summing over all possible values of N:

P(K=k) = P(N=0,K=k) + P(N=1,K=k) + P(N=2,K=k) + P(N=3,K=k)

The conditional probability mass function of N given that K=2 can be calculated using Bayes' theorem:

P(N=n|K=2) = P(K=2|N=n) * P(N=n) / P(K=2)

For N and K to be independent, the joint probability mass function should factorize into the product of the marginal probability mass functions:

P(N=n,K=k) = P(N=n) * P(K=k)

If this condition is not satisfied, then N and K are dependent.

To learn more about joint probability, refer below:

https://brainly.com/question/29582649

#SPJ11

Answer:

0.95P - 1.05P

Step-by-step explanation:

Calculate the error

5% of 1.0 Pound

5/100 x 1.0 = 5/100

1/20 = 0.05

The error is + or - 0.05

If you add 0.05 to 1.0Pound, you get 1.05P

If you Subract 0.05 to 1.0Poumd, you get 0.95Pound

The weight will be between 0.95Pound and 1.05 Pound

To simplify the quotient √50/√10, we need to factor out the largest perfect square that divides each radicand. In this case, we can factor out 25 from both 50 and 10 to get:

√50/√10 = √(252) / √(252) = √25 * √2 / √25 * √2 = √2

Therefore, the simplified form of the quotient is √2. Among the given choices, options B and E are equivalent to √2, as √15/√3 can be simplified as √(35)/√3 = √5 * √3 / √3 * √3 = √5/√3, and √3 is the same as √(31) and there is no √2 term in the denominator to combine with it. Hence, the options B and E are equivalent to the quotient √50/√10.

The new box would need approximately 8 ounces of paint and would hold 120 cups of sugar.

To find out how much paint the new box would need and how much sugar it would hold, follow these steps:
1. The original box holds 15 cups of sugar, and it takes 2 ounces of paint to cover it completely. When you double the dimensions of the box, areas are scaled by [tex]k^2[/tex] (k is the scale factor), and volumes are scaled by[tex]k^3.[/tex]
2. Since you double the dimensions, the scale factor k is 2.
3. The surface area of the box will be scaled by [tex]k^2, which is 2^2 = 4.[/tex]So, the new box will need 4 times the amount of paint that the original box needed. Since the original box needed 2 ounces of paint, the new box will need 2 × 4 = 8 ounces of paint.
4. The volume of the box will be scaled by [tex]k^3, which is 2^3 = 8[/tex]. So, the new box will hold 8 times the amount of sugar that the original box held. Since the original box held 15 cups of sugar, the new box will hold 15 × 8 = 120 cups of sugar.
In conclusion, the new box would need approximately 8 ounces of paint and would hold 120 cups of sugar.

for such more question on sugar

https://brainly.com/question/25936585

#SPJ11