Answer:
D and B.
Explanation:
The wavelength must be taken from the same corresponding point. D and B are both at the crests of a wave, with no other crests in between, which means the distance between them is equal to one wavelength.
Find the mass of the second object if the force of gravity between the two objects is 0.128N. The mass of the first object is 1300 kg and the 2 objects are 0.23 m apart.
Considering the Law of Universal Gravitation, the mass of the second object is 78090.19 kg.
The Law of Universal Gravitation is a law that states that bodies, by the simple fact of having mass, experience a force of attraction towards other bodies with mass, called gravitational force.
This law establishes that every particle attracts any other particle with a force directly proportional to the product of the masses of both and inversely proportional to the square of the distance that separates them:
[tex]F=G\frac{m1m2}{r^{2} }[/tex]
where m1 and m2 are their masses; r the distance between them and G a universal constant that is called the constant of gravitation.
In this case, you know:
F= 0.128 NG=6.67× 10⁻¹¹ Nm²/kg²m1= 1300 kgm2= ?r= 0.23 mReplacing:
[tex]0.128 N=6.67x10^{-11}\frac{Nm^{2} }{kg^{2} } \frac{1300 kg m2}{(0.23 m)^{2} }[/tex]
Solving:
[tex]0.128 N=1.639x10^{-6}\frac{N}{kg }x m2[/tex]
m2=0.128 N ÷ 1.639×10⁻⁶ [tex]\frac{N}{kg}[/tex]
m2=78090.19 kg
In summary, the mass of the second object is 78090.19 kg.
Learn more:
https://brainly.com/question/858421?referrer=searchResultshttps://brainly.com/question/2347945?referrer=searchResultsWhen there is a temperature inversion, you would expect to experience Group of answer choices clouds with extensive vertical development above an inversion aloft. good visibility in the lower levels of the atmosphere and poor visibility above an inversion aloft. an increase in temperature as altitude increases.
Temperature inversion leads to an increase in temperature as altitude increases.
The term temperature inversion refers to a situation in which a layer of warm air lies over a layer of cool air. This is also referred to as thermal inversion. This occurs when the air below to loose heat rapidly.
One of the effects of temperature inversion is reduction in visibility. So, thermal inversion leads to an increase in temperature as altitude increases.
Learn more: https://brainly.com/question/8646601
hello could some one please help me wit these
Answer:
1.D 2.A 3.A 4.B 5.C 6.A 7.A 8.A
Explanation:
Answer:
Question one is: kinetic energy
Question two is: tin
Question three is: zinc
Question four is: compression stroke
Question five is: second law of thermodynamics
Question six is: Convection
Question seven is: refrigerater
Explanation:
The next page called use vocabulary
the answers:
Question twenty three is: Heat engine
Question twenty four is: Thermodynamics
Question twenty five is: solar collector
Question twenty six is: specific heat capacity
Question twenty seven is: a conductor
Question twenty eight is: it's total energy increasing
Question thrity is: internal combustion engine
Question thrity one is: Exhaust stroke
Question thrity two is: plastic
Question thrity three: I don't know this one sorry!
Question thrity four is: Temperature
Question thrity five is: Heat
Hope his helps!!! <3
What is the best reason astronomers have come up with to explain why sunspots are cooler and look darker
Answer:
Sunspots are places where the strong magnetic fields in the Sun resist the upward motion of bubbling hot gases from underneath
Explanation:
a
(2) A 800 g block is pushed up an inclined plane (angled at 18°) with a velocity of 11.8 m/s. The first block slides up the
incline a distance of 2.2 m and strikes a second block with a mass of 300 g also moving at 3.4 m/s up the incline.
The two blocks hit and stick together. Determine the following:
(i) The maximum vertical height of the two blocks when they stop.
(ii) The time needed for the blocks to reach the bottom of the incline after the moment of impact.
(u = 0.19)
this is my attachment answer hope it's helpful to you
An object weights 1000N on the earth’s surface. [ g=10N/Kg]
Calculate its mass
Answer: An object weights 1000N on the earth's surface. ... Calculate its mass ... strength is 10 N/kg how many newtons does a 30kg object weigh.
Explanation:
Find the acceleration if the force is 10 N and the mass is 5000 g.
Answer:
If the force is 10N and mass is 5000G, then a=2m/s2
Explanation:
F=10N
m=5000
g=5kg
a=10N/ 5kg
and finally; a= 2m/s2
the temperature of a room is 77°F what would be the temperature in Celsius scale
Formulas change from F to degree C : C = ( F - 32 )/1.8
so we have (77-32)/1.8 = 25 oC
ok done. Thank to me :>
Answer: The answer is C. 298 K
Explanation:
An electric heater is rated 300W 110V. The safety fuse in the circuit can withstand 15 A of current. How many heaters can be safely operated in the circuit
The number of heaters that can safely be operated in the circuit is 5 heaters.
From the question given above, the following data were obtained:
Power of heater = 300 W
Voltage (V) = 110 V
Current (I) = 15 A
Number of heaters = ?Next, we shall determine the power that can be drawn from the circuit. This can be obtained as follow:Voltage (V) = 110 V
Current (I) = 15 A
Power (P)= ?P = IV
P = 15 × 110
P = 1650 WThus, the power that can be drawn from the circuit is 1650 W
Finally, we shall determine the number of heaters that can be operated in the circuit. This can be obtained as follow:Power of heater = 300 W
Power of Circuit = 1650 W
Number of heaters = ?[tex]Number \: of \: heaters \: = \frac{power \: of \: circuit}{power \: of \: heater} \\ \\ = \frac{1650}{300} \\ \\ = 5.5[/tex]
From the calculation made above, the number of heaters that can be operated safely in the circuit is 5 heaters.
Learn more: https://brainly.com/question/14478862
Please help me calculate this question along with the equation
Hi there!
We can use the following:
U (Gravitational Potential Energy) = mgh
m = mass of object (kg)
g = acceleration due to gravity OR gravitational field strength
h = height, or displacement (m)
ΔU = Uf - Ui, so:
Uf = 3 × 1.5 × 10 = 45 J
Ui = 3 × 0 × 10 = 0
ΔU = Uf - Ui = 45 - 0 = 45 J
What is electromagnetic force and how does it work and what it does??
Answer:
Explanation:
The electromagnetic force, also called the Lorentz force, acts between charged particles, like negatively charged electrons and positively charged protons. Opposite charges attract one another, while like charges repel. The greater the charge, the greater the force.
stacie, who has a mass of 45 kg, starts down a slide that is inclined at an angle of 45 degree with the horizontal. If the coefficient of kinetic friction between stacie's shorts and the slide is 0.25, what is her acceleration
The acceleration of the mass sliding along the horizontal surface is 5.2 m/s².
The given parameters;
mass of the crate, m = 45 kgangle, = 45 degreescoefficient of kinetic friction, = 0.25The acceleration of the mass is calculated by determining the net force on the mass as shown below;
[tex]\Sigma F_{net} = ma\\\\Wsin\theta - F_k = ma\\\\mg sin\theta - \mu_k F_n = ma\\\\mg sin\theta - \mu_k mg\ cos\theta = ma\\\\g sin\theta - \mu_k g\ cos\theta = a\\\\g(sin\theta - \mu_k \ cos\theta ) = a\\\\9.8(sin\ 45 \ - \ 0.25\times cos \ 45) = a\\\\9.8(0.53) = a\\\\5.2 \ m/s^2 = a[/tex]
Thus, the acceleration of the mass sliding along the horizontal surface is 5.2 m/s².
Learn more here:https://brainly.com/question/16902584
about how much more energy is released in a 6.5 richter magnitude earthquake than in one with magnitude 5.5?
Answer:
For example, an earthquake of magnitude 5.5 releases about 32 times as much energy as an earthquake measuring 4.5. Another way to look at this is that it takes about 900 magnitude 4.5 earthquakes to equal the energy released in a single 6.5 earthquake.
Explanation:
A piece of wood is floating in a tub of water. a second piece of wood rests on top of the first piece; it does not touch the water. if the second piece of wood is removed from on top of the first piece and placed in the water, what happens to the water level in the tub?
Answer:
The water would rise because of displacement in the water
Explanation:
A vinyl "record" with a diameter of 0.3 m is spinning at a rate of 1 m/s.
a) What would the centripetal acceleration be for a piece of gum (0.005kg) stuck to the outside edge of the record?
b) How much centripetal force will the gum have to overcome to remain "stuck" to the vinyl?
This question involves the concepts of centripetal force and centripetal acceleration.
a) The centripetal acceleration for the piece of gum stuck to the outside edge of the record will be "6.67 m/s²".
b) The gum will have to overcome "0.033 N" centripetal force to remain stuck to the vinyl.
a)
The centripetal acceleration of the gum can be found using the following formula:
[tex]a_c=\frac{v^2}{r}[/tex]
where,
[tex]a_c[/tex] = centripetal acceleration = ?
v = linear speed of record = 1 m/s
r = radius of the record = [tex]\frac{diameter}{2}=\frac{0.3\ m}{2}=0.15\ m[/tex]
Therefore,
[tex]a_c=\frac{(1\ m/s)^2}{0.15\ m}\\\\a_c = 6.67\ m/s^2[/tex]
b)
Now, the centripetal force can be given as follows:
[tex]F_c=ma_c\\F_c=(0.005\ kg)(6.67\ m/s^2)\\F_c=0.033\ N[/tex]
Learn more about centripetal force here:
brainly.com/question/11324711?referrer=searchResults
The attached picture shows the centripetal force.
What substance is a polymer found in nature?
Silk,wool, DNA, cellulose and protein
Un automóvil aumenta su rapidez cuando está en una pista circular. ¿Tieneaceleración centrípeta? ¿Tiene aceleración angular? Explique.
Explanation:
espero que re ayude esta información para tu pregunta
what is the magnitude of the torque that the axle must apply to prevent the disk from rotating?
The required torque at the axle, is given by the difference between the
moments of the applied forces.
The torque required is 19.62 N·m counterclockwise
Reasons:
The given parameters are;
Mass of the disk, m = 5.0 kg
Location of the axle = Half the radius of the disk
Diameter of the disk, D = 40 cm = 0.4 m
Applied mass, 0.1 m from the axle = 15 kg
Applied mass, 0.3 m from the axle = 10 kg
Required:
Magnitude of torque at the axle that prevent the disk from rotating
Solution:
Torque needed = Clockwise moment - Counterclockwise moment
Clockwise moment = (10 kg × 0.3 m + 5 kg × 0.1 m) × 9.81 m/s² = 34.335 N·m
Counterclockwise moment = 15 kg × 0.1 m × 9.81 m/s² = 14.715 N·m
τ + Counterclockwise moment = Clockwise moment
τ + 14.715 N·m = 34.335 N·m
Torque required, τ = 34.335 N·m - 14.715 N·m = 19.62 N·m
Torque required, τ = 19.62 N·m counterclockwise
Learn more here:
https://brainly.com/question/19044661
https://brainly.com/question/19247046
The probable question drawing obtained from a similar question online is attached
Which country is considered to have one of the best ski teams in the world?
Answer:
France
Explanation:
France is the undisputed champion in the world of skiing.
I would like to know if it would be m/s² or just m/s and explain why. thanks
It will be
[tex] {m/s}^{2} [/tex]
I am just explaining with the units only, because you want to know the accurate unit.
[tex] \frac{m/s}{s} \\ = \frac{m}{s} \times \frac{1}{s} \\ = \frac{m}{s \times s} \\ = \frac{m}{ {s}^{2} } \\ = {m/s}^{2} [/tex]
Hope you understood.
Do comment if you have any query.
1kg red-hot iron is put into 1 L of cool water. Explain in detail what will happen to the temperatures of both objects.
The equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.
According to the principle of conservation of energy, the heat lost by the red-hot iron is equal to heat absorbed by the cold water.
[tex]Q_{I} = Q_{w}\\\\m_IC_I(t_I - T) = m_wC_w (T-t_w)[/tex]
where;
T is the equilibrium temperatureFrom the equation given above, we can conclude that the equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.
Learn more here:https://brainly.com/question/14205142
Please help !!!
Will give the brainliest..
Please answer correctly..
Explanation:
hope this is right!!!!!!!!!!!!!
1. a. Electron 1 -1
b. Proton 2000 +1
c. Neutron 2000 0
2. a. An uncharged nucleon is neutron. It is a chargeless subatomic particle.
b. The particle with the least mass is electron. The mass of an electron is so small that it is considered to be negligible while calculating the atomic mass of an element.
c. The particle with the same mass as a neutron is proton. However if we see the absolute mass of neutron and proton then it is seen that neutron has a greater mass than proton.
d. The particle with the same amount of charge as an electron is proton. Note that the amount of charge is only same. Electron is negatively charged while proton is positively charged.
e. A particle that is negatively charge is electron. The relative charge of electron is -1.
Hope you could understand.
If you have any query, feel free to ask.
When riding your bike, you come up to a small child who jumps in front of you. You slam on the brakes, and your bike comes to a sliding stop. Which force greatly increases when you lock the brakes and slide
Answer: friction :)
Explanation:
I took the test and got 100%
What do you mean by 100W power ?
Answer:
The power rating 100W means the bulb consumes electrical energy of 100 Joule per hour. Joule is the SI unit of energy. 1 Watt-hour is equal to 3600 Joules.
Part B
Based on the information in the article, how could plants be used in the future to help counteract some human
emissions?
Answer:
Having more plants performing photosynthesis could help reduce the amount of carbon dioxide in the atmosphere.
Explanation:
sample answer
The plants can be used in the future to help counteract some human
emissions they absorb carbon dioxide from the air and release oxygen.
What is photosynthesis?It is a process carried out by photosynthetic autotrophic organisms, such as plants, algae and some prokaryotes. These organisms capture sunlight, convert it into chemical energy, which will be used to produce organic compounds, based on water and carbon dioxide.
Trees, like other plants, in the process called photosynthesis, absorb carbon dioxide from the air and release oxygen. They also make the air wetter and cooler. In this way, plants contribute to the good quality of the air we breathe.
See more about phtosynthesis at brainly.com/question/1388366
How long does it take a plane, traveling at a constant speed of 200 m/s, to fly once around a circle whose radius is 2750 m
Answer:
2000 and 156300
jade it jawaban nya
Can you achieve Light Speed with a Perpertual Motion Machine containing High Energy?
Answer:
Yes
Explanation:
Perpetual Motion Machine (PMM) which can be applied to produce electricity, may be an alternative solution for the problem the world is facing today. The machine is designed to generate power from repulsive forces of permanent magnet without utilizing external sources.
a person sits on a freely spinning lab stool that has no friction in its axle. when this person extends her arms,
Hi there!
[tex]\boxed{\text{Her angular velocity decreases.}}[/tex]
Recall the conservation of angular momentum:
[tex]L_i = L_f\\\\I_iw_i = I_fw_f[/tex]
When this person extends her arms, her moment of inertia increases.
According to the conservation of angular momentum, if the moment of inertia increases, the angular velocity must DECREASE.
A ball is launched from a slingshot. As the ball travels along its trajectory, what force(s) are acting on it? Select all that apply.
Group of answer choices
Force of air and gravitational force are acting on the ball when launched from the slingshot.
When a ball is launched from a slingshot, during its travel force of air as well as gravitational force are acting on the ball because there is air which moves opposite to the motion of a ball whereas the force of gravity attracts the ball downward.
The force of air slows down the motion of the ball while on the other hand, the force of gravity brings the ball to the ground due to attraction. If these two forces are not present then the ball continues its motion forever so we can conclude that force of air and force of gravity are acting on the ball when launched from the slingshot.
Learn more: https://brainly.com/question/25533186
Any vector can be expressed as the sum of two components, usually
referred to as what?
Two vectors can be added together to determine the result (or resultant). ... computing the vector sum of all the individual forces acting upon that object.
i hope u understand