Answers
Answer:
The individual substances in a mixture can be separated using different methods, depending on the type of mixture. These methods include filtration, evaporation, distillation and chromatography.
Explanation:
Related Questions
Two substances each have a
temperature of 23 degrees Celsius.
After they are combined the
temperature rises to 27 degrees
Celsius. What evidence proves a
chemical reaction occurred?
Answers
Explain why energy sources do not have 100% efficiency. Why do you think some have lower efficiencies?
Answers
Answer:
Energy sources do not have 100% efficiency because the processes of energy conversion to usable forms involves energy losses.
Some have lower efficiencies due to; energy losses in form of heat during conversion, poor technology applied during conversion of energy and lack of desire equipment to use in the energy conversion system.
Explanation:
The desired form of energy for use is derived from conversion of energy from the source using an energy converter into another form which is usable. The efficiency of the energy converter is calculated as;
л = output energy/input energy
The efficiency of energy is limited to the cost of equipment required for conversion from energy source by the energy converter to a form which is usable. Additionally, because energy sources are scarce, the technology to use in energy conversion is a factor affecting energy efficiency in that high efficiency will require advanced technology with better equipment leading higher costs of that energy form. when heat losses are involved during energy conversion, efficiency lowers, thus its better if such losses are used as energy input in another system.
I don't understand how and why some transition metals form more than one ions eg: copper forms two. PLS EXPLAIN. I WILL GIVE YOU BRAINLIEST.PLS EXPLAIN PROPERLY AND IN FULL DETAIL. I AM IN YEAR 9.
THANKYOU
USE COPPER OXIDE IONS AS AN EXAMPLE.
7-8 POINTS
Answers
Answer:because some have more radiation than others causing mutations and there for either decreasing or increasing the amount of ions
copper is a acidic metal in general therefor it will most likely erode faster than any other metal making it hard to determan the number of ions in general the metal will have basicly what I’m trying to say is there is no solid answer as many metals can change there ions for no given reason
Explanation:
which solution has no effect on litmus?
1) acidic
2) basic
3) alkaline
4) neutral
Answers
Hope this help
what are the stages of breast cancer and what happens in each stage?
actually anatomy & physiology
own words pls i need it now
Answers
Answer:
There are 5 stages of breast cancer: stage 0 (zero), which is non-invasive ductal carcinoma in situ (DCIS), and stages I through IV (1 through 4), which are used for invasive breast cancer. The stage provides a common way of describing the cancer, so doctors can work together to plan the best treatments.
Explanation:
How many significant figures are in 20600?
Answers
There are 3 significant figures in 20600.
how did rutherford contribute to atomic theory?
Answers
Explanation:
Rutherford’s laboratory showed that when alpha particles are fired into gas atoms, a few are violently deflected, which implies a dense, positively charged central region containing most of the atomic mass.
Answer dis please I will like and 5 star if correct
Answers
pls help me i have to turn this in in less than 15 min.
Answers
Answer:
Last one
Explanation:
Answer:
Boiling point!
Explanation:
Distilled water is capable of being heated beyond the normal boiling point due to absence of dissolved impurities which provide nucleating points at the normal boiling point.
If you enjoyed my answer, I'd appreicate a Thanks and a rating!
Have a great day!
how does tungsten most common isotope relate to the average atomic mass of the element
Answers
Answer:
It has the most quantitative effect on the average atomic mass of the element.
Explanation:
Tungsten's most common isotope will have the most quantitative effect on the average atomic mass.
The most common isotope of tungsten will represent its most abundant isotope.
The proportion by which each element occurs in nature is the geonormal abundance. The geonormal abundance is used to calculate the average atomic mass.The isotope with the most geonormal abundance will have the highest effect on the average atomic mass of an element.
The atomic weight of iodine is less than the atomic weight of tellurium. However, Mendeleev listed iodine after tellurium in his original periodic table because he suspected the atomic weights for these elements were inaccurate. What was Mendeleev's reason for this suspicion?
Answers
Explanation :
As we know that Mendeleev arranged the elements in horizontal rows and vertical columns of a table in order of their increasing relative atomic weights.
He placed the elements with similar nature in the same group.
According to the question, the atomic weight of iodine is less than the atomic weight of tellurium. So according to this, iodine should be placed before tellurium in Mendeleev's tables. But Mendeleev placed iodine after tellurium in his original periodic table.
However, iodine has similar chemical properties to chlorine and bromine. So, in order to make iodine queue up with chlorine and bromine in his periodic table, Mendeleev exchanged the positions of iodine and tellurium.
As we know that the positions of iodine and tellurium were reversed in Mendeleev's table because iodine has one naturally occurring isotope that is iodine-127 and tellurium isotopes are tellurium-128 and tellurium-130.
Due to high relative abundance of tellurium isotopes gives tellurium the greater relative atomic mass.
Explain what is meant by the natural abundance of isotopes. Can someone help me to answer this plz
Answers
What is a possible reason that ecosystem 2 has fewer species than ecosystem 1?
Answers
it doesn't repopulate as fast because ecosystem 2 could have more trouble reproducing then ecosystem 1.
I NEED HELP QUICK Activity:
Part 1: Write all bold vocabulary and define the words (See attached PDF File below). Make sure to number each.
Part 2: Look at the "Second Read of Investigating Landforms On Venus" worksheet (Slide 14) and highlight text to the questions on the worksheet.
Part 3: Answer the questions on the "Second Read of Investigating Landforms On Venus" worksheet: 1) How were the novae on Venus similar to the landforms in Geyra's computer model? AND 2) How did the results of Gerya's model provide evidence for what formed the novae on Venus? (Slide 16)
Part 4: Write the notes: (Slide 19)
3) Scientists can use models to test their ideas and get evidence about processes in the natural world that are difficult to observe.
Exit Slip: How do models help scientists answer questions?
Answers
If the molar mass of a hydrocarbon is 26.0 g/mol and it’s empirical formula is CH what is the molecular formula
Answers
empirical formula
is the simplest whole number ration that defines constituent atoms in a species. The
molecular formula
is always a multiple of the
empirical formula
.
plss
tell
the
ans
.............
Answers
Answer:
b option will be the answer because in b option the light rays are coming in the eyes and you will be able to see the thing written on the sheet of paper
i hope you got it if yes please mark it as brainliest
How do you know which elements increases or which elements decreases on a Ionisation graph? Like how can you figure out that these elements will increase on the graph and which will decrease?
Answers
Explanation:
There is a trend in the periodic table.
I.E increases up the group and across the period. So you know that metals have less I.E compared to non-metals.
What has the higher first ionization energy? Mg or Cl
Answers
Ionization Trend: First ionization energy will increase left to right across a period and increase bottom to top of a family (column).
If we compare Mg and Cl:
Mg is column 2 (far left) in the periodic table, while Cl is column 17 (far right). Based on the ionization rule explained above, Cl will have the higher first ionization energy.
i need help to pass my class
Answers
Answer:
B
Explanation:
The attraction is stronger when the magnet is closer so moving it away would decrease the strength.
Can someone help me find the 5 digits numbers in here?
Answers
Answer:
20322
Explanation:
So first pumpkin - 2
The second pumpkin - 0
The third pumpkin I’m unsure of
The forth pumpkin - 2
The fifth pumpkin - 2
So 20?22
Just an idea for ya. Hopefully it helps
Characteristics help scientists ______objects.
(A) isolate
(B) identify
(C) theorize
(D) quantify
Answers
Answer:
b
Explanation:
identify objects.
Who wants to do my acellus work? Or know how to get the answers ?
Answers
im just answering questions to get points Explanation:
i dont know what points do
Answer:
Hello I passed my Chemistry exam (Acellus) in the beginning of June:)
Explanation:
Where are each part of the atoms located?
Answers
Answer: With the portion of hydrogen, all atoms have three parts. The parts of an atom are protons, electrons, and neutrons. A proton is accurately charged and is located in the center or nucleus of the atom. Electrons are negatively charged and are located in rings or orbits spinning around the nucleus.
Explanation: I hope this was helpful.
At point A, the beginning of observations, the substance exists in a solid state. Material in this phase has _________________ volume and _________________ shape. With each passing minute, _________________ is added to the substance. This causes the molecules of the substance to _________________ more rapidly which we detect by a ________________ rise in the substance. At point B, the temperature of the substance is __________°C. The solid begins to ________________. At point C, the substance is completely _______________ or in a _______________ state. Material in this phase has _________________ volume and ________________ shape. The energy put to the substance between minutes 5 and 9 was used to convert the substance from a __________________ to a _________________. This heat energy is called the latent heat of fusion. (An interesting fact.)
Between 9 and 13 minutes, the added energy increases the ____________________ of the substance. During the time from point D to point E, the liquid is ____________________. By point E, the substance is completely in the ________________ phase. Material in this phase has __________________ volume and ___________________ shape. The energy put to the substance between minutes 13 and 18 converted the substance from a _______________ to a _______________ state. This heat energy is called the latent heat of vaporization. (An interesting fact.) Beyond point E, the substance is still in the ___________________ phase, but the molecules are moving _____________________ as indicated by the increasing temperature.
Substance
Melting point
Boiling point
Bolognium
20 °C
100 °C
Unobtainium
40 °C
140 °C
Foosium
70 °C
140 °C
Which of these three substances was likely used in this phase change experiment?
Answers
Answer:
At point A, the beginning of observations, the substance exists in a solid state. Material in this phase has _____fixed____________ volume and ______________fixed___ shape. With each passing minute, ______________heat___ is added to the substance. This causes the molecules of the substance to _____collide____________ more rapidly which we detect by a ______temperature__________ rise in the substance. At point B, the temperature of the substance is __________°C. The solid begins to ______melt__________. At point C, the substance is completely ______liquid_________ or in a _______________ state. Material in this phase has _______fixed__________ volume and ______no definite______ shape. The energy put to the substance between minutes 5 and 9 was used to convert the substance from a ________solid__________ to a __________liquid_______. This heat energy is called the latent heat of fusion. (An interesting fact.)
Answer:
At point A, the beginning of observations, the substance exists in a solid state. Material in this phase has _____fixed____________ volume and ______________fixed___ shape. With each passing minute, ______________heat___ is added to the substance. This causes the molecules of the substance to _____collide____________ more rapidly which we detect by a ______temperature__________ rise in the substance. At point B, the temperature of the substance is __________°C. The solid begins to ______melt__________. At point C, the substance is completely ______liquid_________ or in a _______________ state. Material in this phase has _______fixed__________ volume and ______no definite______ shape. The energy put to the substance between minutes 5 and 9 was used to convert the substance from a ________solid__________ to a __________liquid_______. This heat energy is called the latent heat of fusion. (An interesting fact.)
Explanation:
What is the Mechanical advantage of a machine that only changes the direction of the force?
Answers
Answer: 1
Explanation:
The number of times a machine increases a force exerted on it The input force will be the same as the output force.
Which is NOT a source of bias? Pick one.
A. Accurate Records
B. Equipment Choice
C. Funding Source
D. Hypothesis Information
Answers
Answer:
A: Accurate Records
Explanation:
What is the mass in grams, if you have 8.42 x 10^18 atoms of Bromine
Answers
Answer:
84.2 grams
Explanation:
you have to multiply 8.42x10^18 to get the answer above
The number of the atom can be used to estimate the mass and moles of the substance by Avogadro's number. The mass of 8.42 x 10¹⁸ atoms of Bromine is equivalent to 0.0011 grams.
What is the mole concept?The mole concept has been the unit of the amount of estimating the mass of the substances with smaller entities. It uses the SI unit mol to measure the amount of mass. It also has been defined by 6.02214076 × 10²³ (Nₐ, Avogadro's number) elementary entities.
The molar mass of Bromine (Br) is 79.904 u and atoms are 8.42 x 10¹⁸.
Atoms to mass are converted as:
= ( 8.42 x 10¹⁸ atom ÷ 1 ) × ( 1 mole Br ÷ 6.02214076×10²³ ) × (79.904 gm Br ÷ 1 mol Br)
= (8.42 x 10¹⁸ × 79.904 gm) ÷ 6.02214076 × 10²³
= 6.727 × 10²⁰ ÷ 6.02214076 × 10²³
= 1.117 × 10⁻³ grams
Therefore, 0.0011 grams is the mass of bromine.
Learn more about the mole concept, here:
https://brainly.com/question/22540912
#SPJ2
How did Mendeleev decide which elements should be placed in the same group of the periodic table?
Answers
Answer:
He grouped elements with similar chemical and physical properties.
Hope this helps
Which is a characteristic of calcium?
A.It has two neutrons
B.It has two energy shells
C.It has two protons
D.It has two electrons in its outer energy shell
Answers
It has two electrons in its outer energy shell
How many grams of sugar must be dissolved in 150 mL of water to make a solution with a concentration of 0.6 g/mL?
Answers
Answer:
250
Explanation:
all you have to do is divide them its simple division cause its by the volume by the density
Mass can be calculated by using moles which can be further calculated from multiplication of Molarity to volume. The mass of sugar to make this solution is 8.6 kg.
What is molarity?
Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/litre. It measure the concentration of any solute in a solution.
Other concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution
Mathematically,
Molarity= number of moles of solute/volume of solution in litre
Where,
moles= given weight /by molecular weight
= w/ 96.0858
Substituting values in equation 1
0.6=(w/96.0858)/(150 )
w=8.6 kg
Thus the mass of sugar is 8.6 kg.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ2