how many moles of oh- are in 55.85 ml of 0.350 m naoh? do not include units and place answers in 3 sig figs. be sure to include any zeros before the decimal and do not put answer in scientific notation.

The most common end product of the chemical weathering of feldspar is clay minerals.

Chemical weathering refers to the decomposition of rocks or minerals due to chemical reactions, water, or atmospheric gases.

The surface area of rocks or minerals is increased as they become more weathered, making them more susceptible to erosion. Clay minerals are the most common end product of the chemical weathering of feldspar.

This is because feldspar minerals are extremely reactive to acidic solutions in the environment, and they can easily become hydrolyzed.

Hydrolysis of feldspar:During hydrolysis, feldspar reacts with water to form clay minerals, silica, and soluble salts.

The hydrolysis reaction:KAlSi3O8 + 2H2O → Al2Si2O5(OH)4 + 4SiO2 + K+ + 2H+ + 2OH-Albite,

which is a type of feldspar, reacts with water to create kaolinite clay minerals, which is the most common end product of the reaction.

This reaction results in an increase in volume, which causes the rock to crack and disintegrate.

The reaction also produces silica, potassium, and aluminum ions, which can be transported by water to other locations.

Chemical weathering of feldspar has a significant impact on soil formation and the availability of nutrients in the environment.

The most common end product of the chemical weathering of feldspar is clay minerals, which plays a vital role in soil structure and plant growth.

to know more about weathering refer here:

https://brainly.com/question/14426457#

#SPJ11

The main reasons that gases deviate from ideal behavior are due to two factors: intermolecular forces and the volume of gas particles.

1. Intermolecular forces: In an ideal gas, it is assumed that there are no attractive or repulsive forces between the gas particles. However, in real gases, intermolecular forces do exist. These forces can cause gas particles to attract or repel each other, resulting in deviations from ideal behavior.

2. Volume of gas particles: Ideal gas laws assume that gas particles have no volume, meaning they are considered point masses. In reality, gas particles have a finite volume, which becomes significant at high pressures and low temperatures. This can also lead to deviations from ideal gas behavior.

In summary, gases deviate from ideal behavior mainly due to the presence of intermolecular forces and the volume of gas particles.

To learn more about ideal gases refer: https://brainly.com/question/29116231

#SPJ11

In order to prepare benzoic acid, the reactants that could be used are Na/NH2 and Reactant A Reactant B O3. In a chemical equation, a chemical reaction is described using chemical formulas and symbols.

Benzoic acid is a white crystalline powder that is somewhat soluble in water. It has a mild, sweet odor and a sour, astringent flavor. It is an organic acid that occurs naturally in several plants and animals' tissues. Benzoic acid is a colorless crystalline solid that is an important precursor for the synthesis of many other organic compounds.

Benzoic acid can be prepared by reacting a Grignard reagent with carbon dioxide, reducing the resulting carboxylic acid, or from toluene using the Perkin reaction. The reactants that could be used to prepare benzoic acid are: Na/NH2Reactant A Reactant B O3. The chemical equation for the preparation of benzoic acid from Na/NH2 is:

C6H5NO2 + 3H2 => C6H5COOH + 2NH3

The chemical equation for the preparation of benzoic acid from Reactant A Reactant B O3 is:

C6H5CH3 + 2O3 => C6H5COOH + H2O + O2

More on benzoic acid: https://brainly.com/question/31109708

#SPJ11

The polarity of a molecule is determined by both the type of bonds and the shape of the molecule. Polar bonds result in a molecule being polar, while non-polar bonds result in a molecule being non-polar. The shape of the molecule can also affect the polarity of the molecule. Molecules that are symmetrical are non-polar, while those that are asymmetrical are polar.

Polar bonds occur when two atoms share electrons unequally, leading to a permanent dipole moment. These molecules are said to be polar. On the other hand, non-polar molecules occur when the atoms involved in the bond share electrons equally, resulting in a non-polar molecule.

The shape of the molecule also plays a role in determining the polarity of the molecule. If the shape of the molecule is symmetrical, with an equal distribution of electrons, then it is considered non-polar.  

Know more about dipole moment here:

https://brainly.com/question/14140953

#SPJ11

The maximum amount of NaNO₃ that can be produced during the experiment is 9 moles

First, we shall obtain the limiting reactant. Details below:

Al(NO₃)₃ + 3NaCl -> 3NaNO₃ + AlCl₃

From the balanced equation above,

1 mole of Al(NO₃)₃ reacted with 3 moles of NaCl

Therefore,

4 moles of Al(NO₃)₃ will react with = 4 × 3 = 12 moles of NaCl

Thus, we can see that a higher amount of NaCl is needed to react with 4 moles of Al(NO₃)₃. Therefore, NaCl is the limiting reactant.

Finally, we can determine the maximum amount of NaNO₃ produced. Details below:

From the balanced equation above,

3 moles of NaCl reacted to produce 3 mole of NaNO₃

Therefore,

9 moles of NaCl will also react to produce 9 moles of NaNO₃

Thus, the maximum amount of NaNO₃ produced is 9 moles

Learn more about mole produced:

https://brainly.com/question/13375719

#SPJ1

Answer:

The mass of 1 mole of substance is 40 g

Molar Mass is defined as the mass in grams of one mole of a substance. The units of molar mass are grams per mole (g/mol).

This can be found by dividing the mass present by the number of moles. Mathematically, the units: grams ÷ moles = g/mol.

Hence, Molar mass (M) = mass (m) ÷ moles (n).

Therefore, M = m/n = 4/0.1 = 40 g/mol

Answer: To prepare 1.15 L of 0.100 M Nitric Acid from a 70.3% by mass concentrated solution with a density of 1.41 g/ml, you must use 2.765 g of the concentrated solution.

In order to prepare 1.15 L of 0.100 M Nitric Acid from a 70.3% by mass concentrated solution with a density of 1.41 g/ml, you need to first calculate the moles of Nitric Acid present in the 1.15 L of the solution. To do this, multiply the density of the solution (1.41 g/ml) by the volume of the solution (1.15 L) to obtain the mass of the solution (1.615 g). Then, divide the mass of the solution (1.615 g) by the molar mass of Nitric Acid (63.01 g/mol) to obtain the number of moles present in the solution (0.02547 moles).

Next, you must determine the volume of the concentrated solution required to obtain 0.100 M of Nitric Acid in 1.15 L of the solution. To do this, divide the number of moles of Nitric Acid required in the solution (0.100 moles) by the number of moles of Nitric Acid present in the 1.15 L solution (0.02547 moles) to obtain the volume of the concentrated solution needed (3.933 L).

Finally, you can calculate the amount of the concentrated solution required to make the desired 1.15 L of 0.100 M Nitric Acid solution. To do this, multiply the volume of the concentrated solution required (3.933 L) by the mass percentage of the concentrated solution (70.3%) to obtain the mass of the concentrated solution needed (2.765 g).

Know more about Nitric Acid here:

https://brainly.com/question/29769012

#SPJ11

1. The concentration of the hydronium ion, [H₃O⁺] is 3.02×10⁻¹⁰ M

2. The concentration of the hydroxide ion, [OH⁻] is 3.31×10⁻⁵ M

The concentration of the hydronium ion, [H₃O⁺], can be obtained as follow:

pH of a solution is given by the following formula:

pH = -Log [H₃O⁺]

Inputting the various parameters, we have

9.52 = -Log [H₃O⁺]

Multiply through by -1

-9.52 = Log [H₃O⁺]

Take the anti-log of -9.52

[H₃O⁺] = Anti-log -9.52

[H₃O⁺] = 3.02×10⁻¹⁰ M

The value of the the hydroxide ion, [OH⁻], can be obtained as follow:

[H₃O⁺] × [OH⁻] = 10¯¹⁴

3.02×10⁻¹⁰ × [OH⁻] = 10¯¹⁴

Divide both side by 3.02×10⁻¹⁰

[OH⁻] = 10¯¹⁴ / 3.02×10⁻¹⁰

[OH⁻] = 3.31×10⁻⁵ M

Learn more about hydroxide ion concentration, [OH⁻]:

https://brainly.com/question/19800885

#SPJ1

The enthalpy change when 100. g of ice at 0.0°C is heated to liquid water at 50.0°C is equal to 333J/g x 100g = 33300 J.

This is because the heat of fusion of water is 333J/g and it takes 33300J of energy to melt 100g of ice at 0.0°C.

The process of melting the ice can be broken down into two steps. First, the ice needs to be heated from 0.0°C to its melting point (0.0°C).

This requires energy to overcome the intermolecular forces that are keeping the ice solid, but no heat is absorbed or released. Second, the ice needs to be heated from its melting point to 50.0°C.

This is when the heat of fusion is released and 333J of energy is absorbed for every gram of ice melted. Therefore, 333J/g x 100g = 33300J of energy must be supplied to the system for the ice to melt and reach 50.0°C.

To know more about heat of fusion click on below link:

https://brainly.com/question/14053504#

#SPJ11

One of the major reasons that physical properties do not differ much from one gaseous substance to another is that gases have weak intermolecular forces between their particles.

The physical properties of a substance are those characteristics that can be measured or observed without causing any change in the substance's identity or composition.

The physical properties of gases include their volume, mass, pressure, temperature, and density.

Boyle's law, Charles's law, and Avogadro's law are three important gas laws that help to describe the physical behavior of gases.

Boyle's law describes the relationship between volume and pressure at a constant temperature.

Charles's law describes the relationship between volume and temperature at a constant pressure.

Avogadro's law describes the relationship between volume and the number of particles at a constant temperature and pressure.

Gases can expand or contract based on the conditions under which they are being held. Gases are highly compressible, and they fill any container that they are placed in.

Because gases have weak intermolecular forces, they can move about freely and do not have a fixed shape.

To know more about intermolecular forces, refer here:

https://brainly.com/question/9007693#

#SPJ11

The percent recovery of acetanilide recrystallization is: 75.5%,

the physical appearance of the purified acetanilide was: white, fine-grained crystals

and the melting point range of the purified acetanilide was: 114.6-116.9 °C

Explanation:

The percent recovery of acetanilide recrystallization is as follows: Initial weight of acetanilide = 2.245 g

Weight of filter paper = 0.343 g

Weight of filter paper + purified acetanilide = 2.633 g

Weight of purified acetanilide = (2.633 - 0.343) g = 2.290 g

Percent recovery = (Weight of purified acetanilide / Initial weight of acetanilide) × 100= (2.290 / 3.032) × 100 = 75.5%

Since the percent recovery is greater than 60%, we can say that the acetanilide recrystallization was successful at purifying the acetanilide.

The physical appearance of the purified acetanilide was white, fine-grained crystals, and the melting point range of the purified acetanilide was 114.6-116.9 °C. Both the physical appearance and melting point range confirm that the acetanilide was purified through the recrystallization process.

To know more about recrystallization refer here:

https://brainly.com/question/15703840#

#SPJ11

Hydration occurs when minerals are dissolved in water. This means that minerals absorb water and expand. Hence, the correct answer is dissolved into water.

Hydration is the procedure of blending an element with water. It's a chemical reaction that takes place between a chemical compound and water molecules, which helps to break down and dissolve the substance being hydrated.

The hydration process in chemistry entails taking a substance and breaking it down into its component parts. This occurs when a compound or molecule takes in water, which results in the separation of the bonds between the atoms or ions.

The newly-formed ions interact with the water molecules, resulting in a new, hydrated compound.

Hydration can also occur naturally in the body. This is why it is essential to drink enough water throughout the day to remain hydrated. Therefore the correct answer is dissolved into water.

Learn more about the Hydration process here:

brainly.com/question/30464975

#SPJ11

The final NaCl concentration when 279 ml of a 0.840 m NaCl solution is mixed with 442 ml of a 0.220 m NaCl solution is 0.46 m NaCl.

To calculate this, the formula for mixing two solutions of different concentrations is:
C₁V₁ + C₂V₂ = CfVf,

where C₁ and C₂ are the concentrations of each solution, V₁ and V₂ are the volumes of each solution, and Cf and Vf are the final concentration and volume, respectively.

Using the formula, we can calculate the final NaCl concentration to be 0.476 m by solving for Cf.

Cf = (C₁V₁ + C₂V₂) / Vf

Cf = ((0.840 m × 279 ml) + (0.220 m × 442 ml)) / (279 ml + 442 ml)

Cf = 0.476 m NaCl.

Learn more about concentration here: https://brainly.com/question/29457847.

#SPJ11

Answer:

The reaction between butanoic acid and ethanol produces ethyl butyrate and water, and the balanced chemical equation is:

Butanoic acid + Ethanol → Ethyl butyrate + Water

The molar mass of butanoic acid is 88.1 g/mol, and the molar mass of ethanol is 46.1 g/mol. The molar mass of ethyl butyrate is 116.2 g/mol.

To determine the amount of ethyl butyrate produced, we need to use stoichiometry and the given mass of butanoic acid to find the number of moles of butanoic acid, and then use the mole ratio to find the number of moles (and mass) of ethyl butyrate produced.

Calculate the number of moles of butanoic acid:

moles of butanoic acid = mass/molar mass = 7.00 g / 88.1 g/mol = 0.0795 mol

Use the mole ratio to find the number of moles of ethyl butyrate produced:

From the balanced equation, we see that 1 mole of butanoic acid reacts with 1 mole of ethanol to produce 1 mole of ethyl butyrate.

So, the number of moles of ethyl butyrate produced = 0.0795 mol (since we assume a 100% yield)

Calculate the mass of ethyl butyrate produced:

mass of ethyl butyrate = moles x molar mass = 0.0795 mol x 116.2 g/mol = 9.23 g

Therefore, 9.23 grams of ethyl butyrate would be synthesized if 7.00 grams of butanoic acid were reacted with excess ethanol, assuming a complete 100% yield.

The diborane solution is added drop-wise to a vial cooled in an ice bath over a period of 5 minutes to control the exothermic reaction that occurs between diborane and methanol.

Diborane (B2H6) is a colorless gas that burns in air and is toxic, it is a boron hydride and is a good reducing agent due to its tendency to release hydrogen gas. Diborane reacts vigorously with water and alcohols and is, therefore, used as a reagent in organic chemistry for hydroboration reactions.

An ice bath is a type of temperature-controlled bath used in science and engineering experiments, it is used to keep a reaction mixture cool while it is being stirred or shaken. An ice bath is prepared by adding ice to a container, such as a bucket or a beaker, and adding water to cover the ice. The reaction mixture is then placed in a smaller container, such as a vial, and placed inside the ice bath. The reaction mixture is cooled by the ice bath and is protected from overheating.

Diborane reacts vigorously with methanol, which is a common solvent used in organic chemistry. The reaction is exothermic and can produce a large amount of heat. To prevent the reaction from overheating and causing a fire or explosion, diborane solution is added drop-wise to a vial cooled in an ice bath over a period of 5 minutes. The slow addition of diborane solution and the use of an ice bath help to control the reaction and prevent it from becoming too hot.

Learn more about diborane at:

https://brainly.com/question/27841774

#SPJ11

Answer: The molarity of the solution formed by dissolving 10.0g of Ca(NO3)2 in 250 mL of aqueous solution is

0.244 M.

The molarity of the solution formed by dissolving 10.0g of Ca(NO3)2 in 250 mL of aqueous solution can be calculated using the following equation: Molarity (M) = (moles of solute / liters of solution).

In this case, we have 10.0 g of Ca(NO3)2, so we first need to convert it to moles. To do this, we multiply the grams of Ca(NO3)2 by its molar mass, which is 164.08 g/mol: 10.0 g × (1 mol/164.08 g) = 0.061 mol.

We also have 250 mL of aqueous solution, which is equivalent to 0.25 L. Plugging these values into the equation above gives us: M = (0.061 mol/0.25 L) = 0.244 M.

Therefore, the molarity of the solution formed by dissolving 10.0g of Ca(NO3)2 in 250 mL of aqueous solution is 0.244 M.

Learn more about molarity here:

https://brainly.com/question/26416088?referrer=searchResults

#SPJ11

The processes that occur are:

Methanol (CH3OH) Dissolution: CH3OH + H2O → CH3OH2+ + OH−

Hydrogen Chloride (HCl) Dissolution: HCl + H2O → H3O+ + Cl−

Sodium Hydroxide (NaOH) Dissolution: NaOH + H2O → Na+ + OH−

Methanol (CH3OH), hydrogen chloride (HCl) and sodium hydroxide (NaOH) all dissolve in water. When these compounds dissolve in water, different processes occur.

When methanol dissolves in water, it forms an ionic bond, where the positive hydrogen atoms of the methanol molecule interact with the negative oxygen atoms of the water molecule.

This process is known as hydrogen bonding, and is represented in the following equation: CH3OH + H2O → CH3OH2+ + OH−.

When hydrogen chloride dissolves in water, it undergoes hydrolysis, where the HCl molecule separates into a hydrogen ion (H+) and chloride ion (Cl-). This is represented in the following equation: HCl + H2O → H3O+ + Cl−.

Lastly, when sodium hydroxide dissolves in water, it forms an ionic bond, where the NaOH molecule separates into a sodium ion (Na+) and hydroxide ion (OH-).

This is represented in the following equation: NaOH + H2O → Na+ + OH−.

In summary, methanol undergoes hydrogen bonding, hydrogen chloride undergoes hydrolysis, and sodium hydroxide forms an ionic bond when dissolved in water.

The chemical equations and sketches for each process are included below:

Methanol (CH3OH) Dissolution: CH3OH + H2O → CH3OH2+ + OH−

Hydrogen Chloride (HCl) Dissolution: HCl + H2O → H3O+ + Cl−

Sodium Hydroxide (NaOH) Dissolution: NaOH + H2O → Na+ + OH−

to know more about methanol refer here

https://brainly.com/question/3006705#

#SPJ11

The volume of the soft drink that is 10.5% sucrose by mass is 718.86 mL.

To find the volume of a soft drink that contains 78.5 g of sucrose (C₁₂H₂O₁₁) with 10.5% sucrose by mass, we can start by calculating the total mass of the solution. This can be calculated using the following equation:

total mass = 78.5 g / 0.105 = 747.619 g

The 10.5% sucrose by mass means that for every 100 g of the soft drink, 10.5 g is sucrose.

As the density of the solution is 1.04 g/mL, the volume of the solution is calculated by dividing the mass of solution by the density of the solution.

V = 747.619 g / 1.04 g/mL = 718.86 mL

Therefore, the volume of the soft drink is 718.86 mL.

It is important to note that the calculation used in this example assumes that the sucrose (C₁₂H₂O₁₁) is the only solute in the solution. If there are other solutes present in the solution, then the calculation needs to be adjusted accordingly.

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

The temperature of the sample in degrees Celsius is 257.5 °C.

The temperature of the sample can be calculated using the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.

In this case, P = 2.17 atm, V = 68.83 L, n = 3.43 mol, and R = 0.08206 L atm mol-1 K-1.

Rearranging the equation will give us the equation for the temperature, T.

T = PV/nR

Pugging in the values, we get:

T = (2.17 atm)(68.83 L) / (3.43 mol)(0.08206 L atm/mol K)

T = 530.65 K

Converting Kelvin to degree Celcius, we have:

T = 530.65 - 273.15 = 257.5 °C

Learn more about ideal gas law here: https://brainly.com/question/27870704.

#SPJ11

169.0 g of [tex]AuCl _{3}[/tex] can liberate 118.4 g of [tex]Cl_{2}[/tex] gas upon decomposition. The molar mass of [tex]AuCl _{3}[/tex] is 303.33 g/mol, which means that 1 mole of [tex]AuCl _{3}[/tex]contains 3 moles of chlorine (3 atoms of chlorine).

To determine the moles of [tex]AuCl _{3}[/tex]in 169.0 g, we divide the mass by the molar mass:

169.0 g / 303.33 g/mol = 0.557 moles of [tex]AuCl _{3}[/tex]

Since each mole of [tex]AuCl _{3}[/tex] produces 3 moles of chlorine, the total moles of chlorine that can be liberated from the decomposition of 0.557 moles of [tex]AuCl _{3}[/tex]is:

0.557 moles x 3 = 1.671 moles of [tex]Cl_{2}[/tex]

Finally, we use the molar mass of chlorine ([tex]Cl_{2}[/tex]), which is 70.90 g/mol, to convert the moles of [tex]Cl_{2}[/tex]to grams:

1.671 moles x 70.90 g/mol = 118.4 g of [tex]Cl_{2}[/tex]

Therefore, 169.0 g of [tex]AuCl _{3}[/tex]can liberate 118.4 g of [tex]Cl_{2}[/tex]gas upon decomposition.

Learn more about molar mass

https://brainly.com/question/22997914

#SPJ4

The statement that describes how a chain reaction results from the nuclear fission of uranium-235 is:  It produces neutrons that strike other nuclei and cause more fission.

Option C.

When a neutron strikes the nucleus of a uranium-235 atom, the nucleus splits into two smaller nuclei and releases two or three neutrons.

These neutrons can then go on to strike other uranium-235 nuclei, causing them to undergo fission and releasing more neutrons. This process continues in a chain reaction, producing a large amount of energy in the form of heat.

However, in order to sustain the chain reaction, there must be enough uranium-235 present and the neutrons must be slowed down to increase the probability of their striking other nuclei.

Learn more about chain reaction here: https://brainly.com/question/6572079

#SPJ1

When adding the measurements 42. 1014 g + 190. 5 g, we get  7 significant figures. Those 7 significant figures are 2, 3, 2, 6, 0, 1 and 4.

Significant figures can be defined as the number of digits in a value which is often a measurement which contribute to the degree of accuracy of the value. We can start counting all the significant figures by starting the first non-zero digit. Significant figures of a number in positional notation are defined as digits in the number that are reliable and necessary to indicate the quantity of something. All zeros that occur between any two non zero digits are significant figures. Significant figures are known as the digits of a number which are meaningful in the terms of accuracy or in the term of precision. That involves any non-zero digits. When we are adding the measurements 42. 1014 g + 190. 5 g, the predicted 7 significant figures as it appears between the two non zero digits.

To learn more about Significant figures

https://brainly.com/question/24630099

#SPJ4

The complete question is,

When adding the measurements 42. 1014 g + 190. 5 g, the answer has ----------Significant figures.

The coulombs of electricity used will be 9,650 C.

To calculate the coulombs of electricity used in this experiment, you must first determine the number of moles of SnSO4 that were reacted.

5.51 g of metallic tin produced indicates that 0.100 moles of SnSO4 were reacted.

Now, coulombs of electricity can be determined using the equation Q = I x t, where I is the current, and t is the time.

Using the information provided, we can determine that the coulombs of electricity used in this experiment is equal to (I x t) = (steady current x time until 5.51 g of metallic tin was produced).

The coulombs of electricity used in this experiment can also be determined by considering the Faraday’s constant, which states that the amount of electricity needed to completely react one mole of a substance is equal to 96,500 coulombs.

Since the reaction involves 0.100 moles of SnSO4, the amount of electricity used is equal to 0.100 moles x 96,500 coulombs, which is equal to 9,650 coulombs.

To summarize, the amount of coulombs of electricity used in this experiment is 9,650 coulombs, and this can be determined using the equation Q = I x t, or by considering the Faraday’s constant. This amount of coulombs of electricity was used until 5.51 g of metallic tin was produced.

To know more about electricity, refer here:

https://brainly.com/question/2552395#

#SPJ11

To prepare 1.25 L of 4% (by mass) glucose solution, the amount of glucose (C6H12O6) needed is approximately 50 grams.

Glucose is a monosaccharide with the molecular formula C6H12O6. It is also known as dextrose, grape sugar, or blood sugar. Glucose is produced by photosynthesis in green plants and is the main source of energy for the cells of the human body. Glucose is a carbohydrate with a chemical structure similar to other sugars.

A 4% (by mass) glucose solution is a solution that contains 4 grams of glucose in 100 ml of water. It is also known as a 4% weight/volume (w/v) solution. This solution is often used in medical settings to treat hypoglycemia, or low blood sugar levels.

To calculate the amount of glucose (C6H12O6) needed to prepare a 4% (by mass) glucose solution:

Step 1: Convert the volume of the solution to milliliters.1.25 L x 1000 mL/L = 1250 mL

Step 2: Calculate the mass of glucose needed to make a 4% (by mass) solution.4 g glucose/100 mL solution x 1250 mL solution = 50 g glucose

Therefore, approximately 50 grams of glucose (C6H12O6) would be needed to prepare 1.25 L of a 4% (by mass) glucose solution.

To know more about glucose refer here:

https://brainly.com/question/2396657#

#SPJ11

LiNHCH3 and an ester are combined to create a SNAc mechanism, the LUMO in this process is Option C- C-O σ* bond.

SNAc (substitution nucleophilic acyl-oxygen cleavage) is a chemical reaction mechanism used to substitute an acyl group for a nucleophile on an ester or a similar carbonyl compound. The mechanism is initiated by the formation of a covalent intermediate, followed by a nucleophilic attack by the nucleophile.

LiNHCH3 is a nucleophile that can participate in a SNAc reaction. When mixed with an ester, the LUMO (lowest unoccupied molecular orbital) of the ester is required for the reaction to occur. A LUMO can either be a π* bond or a σ* bond. The C-O σ* bond in the ester is the LUMO in this SNAc reaction, according to the question. therefore, the answer is C. C-O σ* bond.

Learn more about chemical reaction here:

https://brainly.com/question/29762834

#SPJ11

Answer:

c.no is a correct answer

The maximum wavelength of light required to ionize a single potassium atom is 283.6 nm.

What is Wavelength?

Wavelength is the distance between two consecutive points in a wave that are in phase with each other. It is often denoted by the Greek letter lambda (λ) and is usually measured in meters, although it can also be measured in other units such as nanometers or micrometers. Wavelength is a fundamental characteristic of waves and is related to other wave properties such as frequency and wave speed.

To calculate the maximum wavelength of light required to ionize a single potassium atom, we can use the formula:

λ = hc/E

where λ is the maximum wavelength, h is Planck's constant , c is the speed of light , and E is the first ionization energy of potassium in joules.

First, we need to convert the first ionization energy of K from kJ/mol to joules per atom:

419 kJ/mol / (6.022 x[tex]10^{23}[/tex] atoms/mol) = 6.973 x [tex]10^{-19}[/tex] J/atom

Now we can plug in the values and solve for λ:

λ = (6.626 x[tex]10^{34}[/tex]J s) x (2.998 x [tex]10^{8}[/tex] m/s) / (6.973 x [tex]10^{-19}[/tex] J/atom)

λ = 283.6 nm

Learn more about Wavelength  from the given link

https://brainly.com/question/10750459

#SPJ1

The flow of energy during a chemical reaction involves the absorption of energy to break initial bonds, followed by the release of energy during bond formation. The net energy change, or enthalpy change, determines whether the reaction is exothermic or endothermic.

When bonds are broken and formed in a chemical reaction, energy is involved in this process. The flow of energy that takes place when bonds are broken and formed in a chemical reaction is called energy transfer. The transfer of energy takes place from one molecule to another molecule.

Hence, the term transfer of energy is used to describe the flow of energy that takes place in this process.

According to the law of conservation of energy, energy cannot be created nor destroyed, but it can be transformed from one form to another. Therefore, when a bond is broken, energy is absorbed or gained by the molecule, and when a bond is formed, energy is released or lost by the molecule.

Thus, in a chemical reaction, when a bond is broken, energy is absorbed by the molecule, and when a bond is formed, energy is released by the molecule. The energy released during a chemical reaction is called exothermic, and the energy absorbed during a chemical reaction is called endothermic.

To learn more about energy change refer: https://brainly.com/question/26176140

#SPJ11

The correct answer for the type of equilibrium that is more likely to omit substances from the equilibrium constant expression is option a) heterogeneous equilibria.

Heterogeneous equilibria are equilibria in which reactants and products exist in two or more phases, such as gas and liquid, or liquid and solid. The equilibrium constant for these types of equilibria does not include any of the substances in the other phase.

For example, if a reaction is occurring in a liquid solution, but some of the reactants and products are gases, then the equilibrium constant will only include the substances that are in the liquid phase.

In contrast, homogeneous equilibria involve all reactants and products in the same phase, such as a gas or a liquid. As a result, the equilibrium constant expression will include all of the substances.

Therefore, heterogeneous equilibria are more likely to omit substances from the equilibrium constant expression.

To know more about heterogeneous equilibria, refer here:

https://brainly.com/question/29313546#

#SPJ11

In the "Reactions" section of your Pre-lab notebook, you should have two reaction schemes involving the alkene. The correct answer is option d.

The Pre-lab notebook is a collection of worksheets and pre-lab assignments that students must finish before lab. This may include preparing solutions, making graphs, filling out data tables, or writing lab reports.A pre-lab notebook is a place where students may record and evaluate their work before and during a laboratory session. It is a document that is kept by the student and used to help them comprehend the material that is presented to them.

The Pre-lab notebook is divided into three sections: the Procedures section, the Data section, and the Reactions section. An alkene is a hydrocarbon that contains a carbon-carbon double bond. Alkenes are typically unsaturated and highly reactive. Alkenes are used in a variety of industries, including the production of plastics, synthetic rubbers, and fibers. Alkenes are also used as solvents in many applications.

They are known for their ability to react with a variety of other compounds. This will ensure you cover a range of possible reactions and provide a comprehensive understanding of the alkene's behavior in different situations.

To know more about alkene, refer here:

https://brainly.com/question/31033378#

#SPJ11