Answers
Answer:
i cannot see the picture
Explanation:
Related Questions
What could be the effects of polluting the water in a small mountain stream?
(A) the pollutants could hurt the fish living in the stream
(B) the pollutants could hurt the vegetation growing along the stream
(C)the pollutants could hurt the organisms living in the lake that the stream feeds into
(D)all of the above
Answers
Answer:
Explanation:
The pollutants can cause algae to grow quickly. These 'blooms' of algae may produce toxins that harm other life in the river. When the algae die and decay, this uses up much of the oxygen in the stream. Without enough oxygen in the water, invertebrates and fish will suffocate .
Answer:
D, all of the above.
Explanation:
Pollutants have many bad effects on living beings around. All of stated in the answer options makes sense.
Match these
Hypothesis
Independent Variable
Conclusion
Amount of water
if a plant receives more water it will grow more
100mL of water yielded the highest mass and height of plants
Answers
The conclusion is the result of the experiment, which supports the hypothesis by stating that 100mL of water yielded the highest mass and height of plants.
Hypothesis: If a plant receives more water, it will grow more.
Independent Variable: Amount of water.
Conclusion: 100mL of water yielded the highest mass and height of plants.
In this experiment, Hypothesis states the relationship between the independent variable and the dependent variable. The independent variable is the amount of water, and the dependent variable is the growth of the plants.
The conclusion is the result of the experiment, which supports the hypothesis by stating that 100mL of water yielded the highest mass and height of plants.
To know more about water yield, visit:
https://brainly.com/question/16359786
#SPJ1
The temperature of an object increases by 38.1 °C when it absorbs 3647 J of heat. Calculate the heat capacity of the object.
Answers
The heat capacity of an object is defined as the amount of heat required to raise its temperature by 1 degree Celsius (or 1 Kelvin). It is denoted by the symbol "C" and has units of J/°C (Joules per degree Celsius) or J/K (Joules per Kelvin).
We can use the formula for heat capacity to calculate its value for the object:
[tex]C = \dfrac{Q}{\Delta T}[/tex]where:
Q is the amount of heat absorbed by the object andΔT is the change in temperature of the object.Substituting the given values, we get:
[tex]C = \dfrac{3647 \: J }{ 38.1\: ^{\circ}C}[/tex]Note that the units of temperature must match (either Celsius or Kelvin) in order for the calculation to be correct. Since the given change in temperature is in Celsius, we can use Celsius for the units of heat capacity as well.
Dividing, we get:
[tex]C = 95.8 \: J/^{\circ}C[/tex]Therefore, the heat capacity of the object is 95.8 J/°C. This means that it requires 95.8 Joules of heat to raise the temperature of the object by 1 degree Celsius (or Kelvin).
[tex]\rule{200pt}{5pt}[/tex]
The acid should be handled with great care why?
Answers
Acids have a strong tendency to corrode. Acid splashing on our flesh can result in severe burns and skin irritation. Therefore, when managing acids, we should exercise caution.
Should one manage strong acids with caution?Although acids and bases are frequently used in a wide range of industrial applications, it's essential to keep in mind that they are hazardous waste and should be handled carefully.
How should laboratory chemicals be handled?When working with concentrated acids or acid solutions, put on chemical splash goggles, chemical-resistant mittens, and a chemical-resistant apron. In a fume cover, work with concentrated acids. In accordance with your requirements, purchase diluted acid solutions. It is safer and simpler to manage, store, and use diluted solutions.
To know more about Acids visit:-
https://brainly.com/question/14072179
#SPJ9
Convert 675000 to scientific notation
Answers
Answer:
To convert 675000 to scientific notation, we need to express it in the form a × 10^n, where a is a number between 1 and 10 (but not 10 itself), and n is an integer.
Starting with 675000, we can divide by 10 repeatedly until we get a number between 1 and 10.
675000 ÷ 10 = 67500 (one division by 10)
67500 ÷ 10 = 6750 (two divisions by 10)
6750 ÷ 10 = 675 (three divisions by 10)
Now we have a number between 1 and 10 (namely, 6.75), and we know that we divided by 10 three times, so the exponent is -3.
Therefore, we can express 675000 in scientific notation as:
6.75 × 10^5
(Note that we could also express it as 6.75 × 10^2 × 10^3, but this is not in standard scientific notation, which requires the coefficient to be between 1 and 10.)
What is the volume on 13.44g of O2 gas at STP?
Answers
given grams x 1 mol O2 / molar mass of element x conversion / 1.00 mol O2
42 grams of nitrogen gas react with
13 grams of hydrogen gas. What is the
limiting reactant and how many grams of
ammonia will be produced?
N2 + 3H22NH3
A) H2; 74 grams NH3 produced
B) H2; 4.3 grams NH3 produced
C) N2; 3.0 grams NH3 produced
D) N2; 51 grams NH3 produced
Answers
Answer:
d
Explanation:
Nitrogen is the limiting reactant.
42 g N2x (1mole N2/28 g N2) X (2 moles NH3/ 1mole N2) X (17 grams NH3/1mole NH3) = 51 g
13 g H2 x (1 mole H2/2 g H2) X (2 moles NH3/3moles H2) X (17 g NH3/1mole NH3) =73.66g
since 51 is smaller than 73.66 and it started with N2 that is why N2 is the limiting reactant)
Instead of using an indicator, what other methods would you suggest using in the titration? And which method would provide the most accurate measurement?
Answers
A different approach is to use a pH meter to keep track of the solution's pH while the titrant is introduced. As the titrant is added, the solution's pH changes; the endpoint can be identified when this happens.
Because it gives a more accurate measurement of the endpoint, this method is more accurate than utilizing an indicator.
TitrationA conductivity meter can also be used to gauge the solution's conductivity as the titrant is applied. As the titrant is added, the solution's conductivity varies, and the endpoint can be identified when this change ends.
Although it is less popular, this approach is also more accurate than utilizing an indication.
Overall, the pH meter approach is probably going to give the most accurate reading because it can spot even the smallest pH changes and gives a more exact reading of the endpoint.
However, the particular experiment and the available resources will determine the method to use.
learn more about titration here
https://brainly.com/question/13307013
#SPJ1
Does electronegativity increase or decrease when you go across a period on the
periodic table? Does it increase or decrease when you move down a group on the
periodic table?
Answers
Answer:
Explanation:
The element with the highest electronegativity is Flourine. Its value is 4. Thus it increases across a period.
Its trend is it increases from left to right and up the groups. So it will decrease going down the group.
What is another example, in real life, where we can prove that gases exist even though we can not see them? Explain why you believe this is a good example.
Answers
Well, us human being rely on [tex]o_{2}[/tex] (oxygen). We human beings breathe this in every day because we need it to survive. This is a good example because it explains how humans don't see [tex]o_{2}[/tex] but use it every day.
According to one acid-base theory, a molecule acts as an acid
when the molecule
(1) accepts an H+
(2) accepts an OH-
(3) donates an H+
(4) donates an OH-
Answers
The Brnsted-Lowry acid-base hypothesis states that when a molecule gives a proton (H+ ion) to another molecule, it behaves as an acid. As a result, the right response is (3) donates an H+.
According to one acid base theory, what is an acid?The Arrhenius theory states that acid is a chemical that causes water to create hydrogen ions. Base is a chemical that causes water to form hydroxide ions.
What underlies acid-base titration's basic premise?A neutralisation reaction takes place during the acid-base titration. Here, the concentration of a particular base or acid is ascertained by neutralisation against an acid or base of known concentration. This kind of titration begins with a drop of an indicator, which changes colour to show the endpoint.
To know more about hydrogen ions visit:-
https://brainly.com/question/7641960
#SPJ1
Part 1: How many oxygen atoms are in one mole of the formula Al2(CO3)3?
Part 2: How many moles of carbon are in 3.5 moles of calcium carbonate?
Answers
There are therefore a total of 14 atoms: 2 Al, 3 C, & 9 O. In other words, 3.5 moles of calcium carbonate will contain 3.5 moles if carbon because each mole of calcium carbonate has one mole of carbon.
How is carbon in CaCO3 calculated?Hence, 40.078 divided by 100.086 everything multiplied by 100% represents the mass percentage for calcium in calcium carbonate. This yields a value of almost 40%. Carbon's mass percentage is calculated by taking 12.011 and dividing it by 100.086, then multiplying that result by 100% to get a number of roughly 12 percent.
How many oxygen atoms make up Al2O3?The subscripts (2 and 3) in this formula indicate how so many atoms will make up one unit of the molecule. There are two aluminium atoms and three oxygen atoms, respectively, denoted by the numbers 2 and 3.
To know more about carbonate visit:
https://brainly.com/question/22530423
#SPJ1
How many significant figures are in 6.07×10^14
Answers
Answer:3
Explanation: counting from left to right there is 3 sig figs.
A percent composition analysis yields 52.1% carbon, 13.2% hydrogen, and 34.7% oxygen. What is the empirical formula for the compound?
Answers
O:C:H ratio is 34.8/16/52.2/12/13/0/1 = 2.17/4.35/13/0 = 1:2/6. Hence, C2H6O is the empirical formula (option D).
What purposes does hydrogen serve?Fuel cells may produce heat and energy from hydrogen. Although transportation and utilities are expanding businesses, fertilizer manufacturing and petroleum refining still use hydrogen most frequently today.
Can hydrogen be burned as fuel?According to the 1992 Energy Policy Act, hydrogen qualifies as an alternative fuel. The ability of hydrogen to power fuel cell technology in zero-emission vehicles, the potential for home consumption, and the high efficiency and quick filling time of fuel cells all contribute to the interest in hydrogen as such an alternative transportation fuel.
To know more about Hydrogen visit:
https://brainly.com/question/28937951
#SPJ1
550.0 mL of air is at 20.0 °C. What is the volume at 60.0 °C?
Answers
At 60.0 °C, the air has a volume of 1650.0 mL.
At constant pressure, the volume of a gas is directly proportional to its temperature.This means that when the temperature increases, the volume of the gas also increases.
At 20.0 °C, the volume of the air is 550.0 mL.
Using the formula [tex]V2 = V1 *\frac{ T2}{T1}[/tex], where the initial volume and temperature are V1 and T1, respectively, and the end volume and temperature are V2 and T2, respectively.
we can calculate the volume of the air at 60.0 °C.
[tex]V2 = 550.0 mL * (\frac{60.0 \°C}{20.0 \°C})[/tex]
V2 = 1650.0 mL
Therefore, the volume of the air at 60.0 °C is 1650.0 mL.
learn more about volume refer:brainly.com/question/24189159
#SPJ1
In the reaction NH3(g) + O2(g) → NO(g) + H₂O(g) How many grams of H₂0 are generated when 1.54 moles of NH3 react?
Answers
Answer: 2.31 mole H2O
Explanation: blance the equation first
4 NH3 + 5O2 --> 4 NO + 6 H20
1.54 moles NH3 x ( 6 mole H20/ 4 moles NH3) X (18 g H20/1mole H20)
2.31 mole H20
calculate the mole fraction of HCl in a 9.8% (by mass) aqueous solution. the density of the solution is 1.03 g/mL
Answers
The mole fraction of HCl in the given solution is 0.051.
What is the mole fraction of the HCL?To calculate the mole fraction of HCl in the given solution, we need to first find the mass of HCl and water present in the solution.
Let's assume we have 100 g of the solution, so 9.8 g of it is HCl, and 90.2 g is water.
Next, we need to find the moles of HCl present in the solution.
To do this, we divide the mass of HCl by its molar mass.
The molar mass of HCl is 36.46 g/mol (1.01 g/mol for hydrogen + 35.45 g/mol for chlorine).
moles of HCl = 9.8 g / 36.46 g/mol = 0.269 mol
The moles of water can be calculated using its molar mass which is 18.015 g/mol.
moles of water = 90.2 g / 18.015 g/mol = 5.005 mol
The total number of moles in the solution is the sum of the moles of HCl and water.
total moles = 0.269 mol + 5.005 mol = 5.274 mol
The mole fraction of HCl can now be calculated by dividing the moles of HCl by the total number of moles.
mole fraction of HCl = 0.269 mol / 5.274 mol = 0.051
Learn more about mole fraction here: https://brainly.com/question/14783710
#SPJ1
The Kp for the reaction A (g) ⇌ 2 B (g) is 0.0110. What is Kp for the reaction 2 B (g) ⇌ A (g)?
Answers
What is the percent of O in
Ca(С2H302)2?
(Ca = 40.08 g/mol, C = 12.01 g/mol,
H= 1.01 g/mol, O = 16.00 g/mol)
Answers
40.5%
Explanation:
Ca×1 = 40
C×4 = 48
H×6 = 6
O×4 = 64
64÷158×100% = 40.5%
Draw and label a picture of an ozone (O3) molecule (Hint start with an O2 then attach the third O). What type of bond is used to attach the 3rd oxygen atom to the ozone molecule? Explain in words how this bond forms.
Answers
The ozone molecule is composed of three atoms of the oxygen.
What is the structure of the ozone molecule?The ozone molecule (O3) is a triatomic molecule, meaning that it consists of three atoms. It is composed of three oxygen atoms, which are held together by covalent bonds.
The structure of the ozone molecule can be described as a bent or V-shaped molecule, with the three oxygen atoms arranged in a triangular fashion. The central oxygen atom is bonded to two other oxygen atoms, which are located above and below it, with bond angles of approximately 117 degrees.
Learn more about Ozone:https://brainly.com/question/14330630
#SPJ1
To goal of the hypothesis is to make an educated guess on what will happen when comparing the viscosity of the paint, honey, and dish soap from most to less viscous (all liquids). What do you think will happen and why. Please provide at least 2 paragraphs that paraphrased background information and research.
Answers
A liquid's viscosity is a measurement of its flow resistance. A liquid's resistance to flow increases with its viscosity. Due to its high density and high molecular weight, honey is regarded as an extremely viscous liquid. Honey has a high viscosity since it is mostly composed of glucose and fructose.
Conversely, paint and dish soap is less viscous because they are not as heavy or dense as honey. The mixture of pigments, solvents, and additives used to make paint gives it a variety of viscosities. Due to its low molecular weight and the presence of surfactants, dish soap often has a low-viscosity liquid.
On the basis of this data, it can be predicted that dish soap will have the lowest viscosity, followed by paint, and then honey. This is true because paint and dish soap have lower molecular weights and are lighter and less dense than honey, which is a viscous, dense liquid with a high molecular weight.
Temperature and pressure have an impact on a liquid's viscosity as well, so it is important to regulate these variables when testing this idea experimentally to assure accuracy. As different brands and formulas might differ in their composition and viscosity, it is also crucial to keep in mind that the type and quality of the paint and dish soap under test may have an impact on the findings of the viscosity test.
learn more about viscosity here
https://brainly.com/question/2568610
#SPJ1
. An IV solution contains 0.0175% of Drug Z, how much of this IV solution should we infuse, if the patient needs 100 mg of Drug Z?
If this solution is infusing at 50 ml/hr, how long will it take take to complete the infusion? Hint: 1mg = 0.001g or ml.
Answers
The infusion will be finished in 114.286 hours.
We need to infuse 100 mg of Drug Z. Since the IV solution contains 0.0175% of Drug Z, we can calculate the amount of IV solution needed for the infusion.
To do this, we need to use the following formula:
Amount of IV solution = [tex]\frac{(Amount of Drug Z * 100) }{ Concentration of Drug Z}[/tex]
Amount of IV solution = [tex]\frac{(100 mg * 100) }{0.0175 \% }[/tex]
Amount of IV solution = 5,714.286 ml
To calculate how long it will take to complete the infusion, we need to use the following formula:
Time to complete infusion =[tex]\frac{Amount of IV solution }{ Rate of infusion }[/tex]
Time to complete infusion =[tex]\frac{ 5,714.286 ml }{ 50 ml/hr }[/tex]
Time to complete infusion = 114.286 hr
Therefore, it will take 114.286 hours to complete the infusion.
learn more about infusion Refer:brainly.com/question/28790508
#SPJ1
how many hydrogen atoms are in 2 moles of h2o?
Answers
Answer:
1 mole = 6.022×10^23 atoms. 1 water molecule = 2 Hydrogen atoms + 1 oxygen atom. So, 1 mole H2O = 1.2044×10^24 hydrogen atoms. Therefore 2 mole H2O will have 2.4088×10^24 hydrogen atoms.
Explanation:
What is the IUPAC name for the compound shown?
Answers
The IUPAC name of the compound is 3-Ethyl-2,2-dimethylhexane.
IUPAC namingIUPAC naming is a systematic method of naming chemical compounds according to a set of rules established by the International Union of Pure and Applied Chemistry. It ensures that each compound has a unique and unambiguous name based on its molecular structure.
From the image:
The longest chain has 6 carbonThe compound is an alkane, thus, the principal chain is a hexaneThere are 2 methyls (CH3) on the second carbonThere is 1 ethyl (C2H5) on the third carbon.Thus, the IUPAC name of the compound is 3-Ethyl-2,2-dimethylhexane.
More on IUPAC naming can be found here: https://brainly.com/question/30086566
#SPJ1
A 50.0-mL sample of 0.200 M sodium hydroxide is titrated with 0.200 M nitric acid. Calculate the pH of the solution, after you add a total of 56.2 mL of 0.200 M HNO3
Answers
Answer:
In this case, the acid is 0.200 M HNO3 and the base is 0.200 M nitric acid. To calculate the pH of a 50.0-mL solution, add 58.3 mL of 0.200 M HNO3. The final pH of the solution will be 8.33. To calculate the pH of a 35.0 mL solution, add 36.7 mL of 0.198 M HNO
Which of these is not a sign of a chemical reaction?
1. The material dissolves
2. Heat is released
3. A gas is given off
Answers
A chemical reaction is known by;
2. Heat is released
3. A gas is given off
How do you know a chemical reaction?A change in color may indicate that a chemical reaction has occurred. For example, when iron is exposed to air and moisture, it rusts and turns from silver to reddish-brown.
If a gas is produced during a reaction, it can indicate that a chemical reaction has occurred. For example, when baking soda is mixed with vinegar, carbon dioxide gas is produced, which causes bubbles to form.
Learn more about chemical reaction:https://brainly.com/question/29039149
#SPJ1
The pressure of a gas will ? when the volume is decreased and will ? when the absolute temperature is decreased.
Answers
Answer:
Explanation:
Pressure and volume are indirectly related.
Pressure and temperature are directly related.
so first ? is increase
2nd ? is decrease
What must the atoms of products equal in a chemical equation?
O atoms in molecules
O electrons in atoms
O protons in atoms
O atoms of reactants
20pts
Answers
Answer:
D
Explanation:
What do the dark areas in the large cells
represent? Explain your reasoning.
Answers
Answer:I think your talking about the chromatin
Explanation: There dark
When a protonated epoxide is attacked by water, the nucleophile attacks from the ___________ in an __________ process.
Answers
When a protonated epoxide is attacked by water, the nucleophile attacks from the "top" or "front" of the epoxide ring in an "S_N2" substitution nucleophilic bimolecular process.
What is protonated epoxide ?
A protonated epoxide is a molecule that contains an epoxide ring (a three-membered ring consisting of two carbon atoms and one oxygen atom) that has been protonated, or had a hydrogen ion (H+) added to it.
The protonation of an epoxide ring can occur in the presence of an acidic medium, such as a strong acid like sulfuric acid (H2SO4) or hydrochloric acid (HCl).
In acidic conditions, the lone pair of electrons on the oxygen atom of the epoxide ring can interact with the positively charged hydrogen ion, resulting in the formation of a protonated epoxide.
Learn more about protonated epoxide here : brainly.com/question/21329956
#SPJ1