identify the false statement about mixtures. please choose the correct answer from the following choices, and then select the submit answer button. answer choices a compound is not considered to be a mixture. a mixture must contain 2 or more pure substances. a mixture can contain compounds and/or elements. a mixture can be separated into its constituent components only by chemical means.

The volume 16.76 L of sulphur tetrafluoride gas were collected.

The ideal gas law is used to calculate the volume of sulfur tetrafluoride collected. The ideal gas law states that PV = nRT, n is the number of gas molecules, P is the pressure in atmospheres, V is the volume of the gas in litres, R is the universal gas constant, and T is the temperature in Kelvin.

Using the information given in the problem, we can calculate the volume of sulfur tetrafluoride gas that is collected. First, convert the temperature from Celsius to Kelvin by adding 273.15. This means that the temperature in Kelvin is 254.15. Next, we can solve for V, the volume of gas collected, by rearranging the ideal gas law equation:[tex]V = \frac{nRT}{P}[/tex].

[tex]n=785.mmol,\\R=0.0821L.atm/K.mol\\T=254.14K\\\\P=1atm[/tex]

Substituting in the values, we get:

[tex]V =\frac{ (785. mmol)(0.0821 L.atm/K.mol)(254.15 K)}{(1 atm) }\\\\V= 16.76 L[/tex]

Therefore, the volume of sulfur tetrafluoride gas collected is 16.76 L.

learn more about sulfur tetrafluoride Refer:brainly.com/question/27590943

#SPJ1

The convection current pictured is associated with the sea breeze phenomenon, so the type of wind that is part of this convection current is D Sea Breeze.

Sea breeze is a local wind that is created by the temperature difference between the land and sea surfaces. During the day, the land surface heats up faster than the sea surface. This causes the air above the land to rise, creating a low-pressure area. Meanwhile, the air above the sea remains cooler and denser, creating a high-pressure area. The pressure difference between the land and sea causes air to flow from the sea to the land, resulting in the sea breeze.

In the picture, we can see that the arrows indicate air moving from the sea towards the land. This corresponds to the direction of the sea breeze flow. Therefore, the type of wind that is part of this convection current is D  Sea Breeze.

Learn more about Sea Breeze here

https://brainly.com/question/13015619

#SPJ1

Answer: It's B Land Breeze I swear

Explanation: I took the test

The pKa value of the unknown weak acid is approximately 5.5.

The titration curve shows the relationship between the volume of HCl added and the pH of the solution. At the beginning of the titration, the pH is relatively high and changes slowly with the addition of HCl. This indicates that the solution contains a weak acid, since strong acids would have a low pH and add rapidly with small amounts of HCl. As more HCl is added, the pH decreases more rapidly, indicating that the solution is becoming more acidic.

The equivalence point occurs at a volume of approximately 25 mL, where the pH is 4.3. This indicates that the solution is now composed primarily of the conjugate acid of the weak acid, since the pH is less than 7. The pKa value of the weak acid can be determined by finding the point on the titration curve where pH=pKa. In this case, the pKa value is approximately 5.5.

To know more about weak acid, here

brainly.com/question/15173067

#SPJ4

--The complete question is, A 0.250 g sample of an unknown weak acid, represented as HA, is dissolved in water and titrated with 0.1 M HCl. The pH of the solution is monitored throughout the titration, and the data is used to create the following titration curve. What is the pKa value of the unknown weak acid?--

The description of each volcano is

Volcanoes erupt with a highly destructive mixture of ash, lava, hot, dangerous gases, and rock. Explosions from volcanoes have claimed lives.

Volcanic eruptions can bring about additional health risks like wildfires, floods, mudslides, power disruptions, and contaminated drinking water.

The tectonic plate borders are home to 60% of all active volcanoes. The majority of volcanoes are situated along the Pacific Ocean's "Ring of Fire," which is a band of volcanic activity.

Some volcanoes, such as those that make up the Hawaiian Islands, develop at locations known as "hot spots" inside of plates.

learn more about volcanoes here

https://brainly.com/question/25121802

#SPJ1

Answer:

Which statement illustrates the difference between a chemical reaction and a nuclear reaction?

Explanation:

Which statement illustrates the difference between a chemical reaction and a nuclear reaction?

The new HCL concentration is 1.11. Mathematically, concentration is calculated by dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution (or, less commonly, the solvent).

(2.50) * (0.400) = (M₂) * (0.900)

(2.50 * 0.400) / 0.900 = M₂

(2.50 * 4) / 9 = M₂

1.11 = M₂

Both hydrogen chloride gas and aqueous hydrochloric acid are referred to as HCl. The reaction between hydrogen and chlorine produces the colourless gas known as hydrogen chloride. When it comes into contact with ambient humidity, it emits white vapours of hydrochloric acid. Hydrochloric acid is a potent mineral acid that has a wide range of industrial applications. Gastric acid naturally contains hydrochloric acid. In technology and industry, hydrochloric acid and hydrogen chloride gas are crucial.

Learn more about HCL here: brainly.com/question/3637432

#SPJ4

The equilibrium constant Kb for the reaction is 4.59 x 10^-10.

The equilibrium constant expression for the reaction between aniline and water is

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

where [C6H5NH2] is the concentration of aniline, [OH-] is the concentration of hydroxide ions, and [C6H5NH3+] is the concentration of anilinium

The pOH of the solution can be calculated from the pH:

pH + pOH = 14

pOH = 14 - 8.82 = 5.1

The concentration of hydroxide ions can be calculated from the pOH:

pOH = -log[OH-]

[OH-] = 10^-5.18 = 6.91 x 10^-6 M

The concentration of aniline can be calculated from the molarity and volume of the solution:

n = C x V = 0.10 mol/L x 0.025 L = 2.5 x 10^-3 mol

[C6H5NH2] = n / V = 2.5 x 10^-3 mol / 0.025 L = 0.1 M

The concentration of anilinium ions can be calculated from the concentration of aniline and the concentration of hydroxide ions using the equilibrium constant expression:

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

[C6H5NH3+] = [C6H5NH2][OH-] / Kb = (0.1 M)(6.91 x 10^-6 M) / Kb

Now we can use the equation for the ionization constant of water (Kw = [H+][OH-] = 1.0 x 10^-14) to find the concentration of H+ ions:

Kw = [H+][OH-] = (1.0 x 10^-14) M^2 = ([C6H5NH3+])([OH-]) = (0.1 M)(6.91 x 10^-6 M)

[H+] = sqrt(Kw / [OH-]) = sqrt(1.0 x 10^-14 / 6.91 x 10^-6) = 1.51 x 10^-5 M

pH = -log[H+] = -log(1.51 x 10^-5) = 4.82

The equilibrium constant Kb can be calculated from the expression:

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

Kb = (0.1 M)(6.91 x 10^-6 M) / (1.51 x 10^-5 M) = 4.59 x 10^-10

To learn more about Equilibrium :

https://brainly.com/question/19340344

#SPJ11

The mass percent of naclo3 in the original sample is 15.1%.

Based on how much oxygen gas is generated when a sample of the compound is heated, the problem asks us to estimate the mass percent of NaClO3 in an impure sample. The quantity of O2 produced and the concentration of NaClO3 in the sample must first be related using a balanced chemical equation.

After making the required calculations, we discover that the original sample's mass percent of NaClO3 is 15.1%. This indicates that of the initial sample's 100 g, 15.1 g are NaClO3, and the remaining impurities. Hence this is the result.

Learn more about naclo3:

https://brainly.com/question/29649249

#SPJ4

Answer:

Explanation:

What is chemical digestion?

When it comes to digestion, chewing is only half the battle. As food travels from your mouth into your digestive system, it’s broken down by digestive enzymes that turn it into smaller nutrients that your body can easily absorb.

This breakdown is known as chemical digestion. Without it, your body wouldn’t be able to absorb nutrients from the foods you eat.

How is chemical digestion different from mechanical digestion?

Chemical and mechanical digestion are the two methods your body uses to break down foods. Mechanical digestion involves physical movement to make foods smaller. Chemical digestion uses enzymes to break down food.

Mechanical digestion

Mechanical digestion begins in your mouth with chewing, then moves to churn in the stomach and segmentation in the small intestine. Peristalsis is also part of mechanical digestion. This refers to involuntary contractions and relaxations of the muscles of your esophagus, stomach, and intestines to break down food and move it through your digestive system.

Chemical digestion

Chemical digestion involves the secretions of enzymes throughout your digestive tract. These enzymes break the chemical bonds that hold food particles together. This allows food to be broken down into small, digestible parts.

The solubility of a gas in a liquid depends on several factors, such as the nature of the gas and the liquid, temperature, and pressure.

According to Henry’s law, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. This means that as the pressure of the gas increases, more gas molecules can dissolve in the liquid. Conversely, as the pressure of the gas decreases, less gas molecules can dissolve in the liquid.

Therefore, out of the four options given, the decreased temperature is the correct answer. Decreased temperature increases the solubility of a gas in a liquid because it reduces the kinetic energy of the gas molecules, making them less likely to escape from the liquid surface. Increased temperature decreases the solubility of a gas in a liquid because it increases the kinetic energy of the gas molecules, making them more likely to escape from the liquid surface. Increased or decreased volume of the gas does not affect its solubility in a liquid, as long as its partial pressure remains constant.

to know more about Henry's law click here:

https://brainly.com/question/23204201

#SPJ4

The cofactor in the reaction shown is Vitamin K. Option 1 is correct.

Vitamin K is a fat-soluble vitamin that plays a crucial role in blood clotting. It is required for the post-translational modification of certain proteins involved in blood coagulation, including prothrombin and factors VII, IX, and X. These proteins require a specific type of chemical modification, known as gamma-carboxylation, in order to be fully functional. Vitamin K serves as a cofactor for the enzyme that catalyzes this reaction.

Without adequate levels of vitamin K, blood clotting can be impaired, leading to increased bleeding and bruising. Conversely, excess vitamin K can interfere with certain medications used to prevent blood clots, such as warfarin. In summary, vitamin K is an essential cofactor in the blood coagulation cascade, and deficiencies or excesses can have significant clinical implications. Option 1 is correct.

The complete question is

What compound is the cofactor in the reaction shown?

To know more about the Cofactor, here

https://brainly.com/question/29818232

#SPJ4

2.55 mol Mg yields 242.89 grams of MgCl2.

Because MgCl2 and Mg have a 1:1 molar ratio, every time 1 mole of Mg interacts, 1 mole of MgCl2 is also created. As a result, the amount of Mg that reacts can be used to compute the number of moles of MgCl2 that are created.

HCl + 2 Mg + MgCl2 + H2

The amount of moles of MgCl2 that are created when 2.55 mol of Mg react can be estimated as follows: 2.55 mol Mg (1 mol MgCl2/1 mol Mg) = 2.55 mol MgCl2.

Now, we need to multiply the number of moles by the molar mass of MgCl2, which is 95.21 g/mol, in order to convert moles of MgCl2 to grams.

242.89 g MgCl2 from 2.55 mol MgCl2 and 95.21 g/mol

As a result, 2.55 mol of magnesium will result in 242.89 g of MgCl2.

To know more about  mol visit:-

https://brainly.com/question/1504637

#SPJ1

F = ma

a = F/m

a = 150N/165kg

a = 0.909 m/s²

In a compression, the particles in the air are arranged closer together than in a normal state, resulting in an increase in air pressure.

In a rarefaction, the particles in the air are arranged further apart than in a normal state, resulting in a decrease in air pressure.

What is compression?

The increase in pressure is due to the collisions between the particles becoming more frequent, which leads to an increase in the number of particles in a given volume. This can occur due to the presence of a sound wave, for example, which causes alternating regions of high and low pressure in the air.

What is rarefaction?

This occurs because the particles are moving farther away from each other due to a decrease in the number of collisions between them. This can also occur due to the presence of a sound wave, where the alternating regions of high and low pressure cause the particles to move back and forth, resulting in areas where the particles are further apart than usual.

To know more about particles, visit:

https://brainly.com/question/11254035

#SPJ1

Complete question is: In a compression, the particles in the air are arranged closer together than in a normal state, resulting in an increase in air pressure and In a rarefaction, the particles in the air are arranged further apart than in a normal state, resulting in a decrease in air pressure.

48.18 g of S8 were generated in this reaction. If 1 mole of Fe and 8 moles of S combine to form 8 moles of FeS.

The reaction's balanced chemical equation is 8 FeS (s) + S8 → 8 FeS. (s)

1 mole S8 divided by 8 moles FeS yields 0.1875 moles S8.

We must utilize S8's molar mass to convert moles to grams. S8 has the following molar mass: 8 32.06 g/mol = 256.48 g/mol

The mass of S8 that was involved in the reaction is as follows: 0.1875 moles S8 256.48 g/mol = 48.18 g S8 (rounded to two significant figures)

The response is 48.18 g.

To learn more about mass of product visit:

brainly.com/question/19694949

#SPJ9

The reaction that occurs when the starting material is a carboxylic acid is called esterification. carboxylic acids react with alcohols in acid to form the functional group ester.

Esterification is a chemical process which involves the combination of two reactants (usually an alcohol and an acid) to form ester as the end product.  Esters are organic compounds, also found in biological materials, and they have a distinctive, fruity smell.

The process of making ester involves combining a carboxylic acid with an excess of an alcohol while using a tiny amount of a strong acid, like conc. H₂SO₄, as a catalyst. Esterification reaction is a reversible reaction, and the equilibrium constant for the reaction is often close to 1. Numerous strategies can be  employed to raise the yield of ester because it is a reversible reaction .

To know more about functional groups here

https://brainly.com/question/29035899

#SPJ4

Without knowing the desired pH of the buffer, we cannot calculate the exact amount of NaOH solution required to produce the buffer. However, we can outline the general steps to solve this problem once the desired pH is known.

        pH = pKa + log([A-]/[HA])

       Rearrange the equation to solve for [A-]/[HA]:

       [A-]/[HA] = 10[tex]^(pH - pKa)[/tex]

       Therefore, the volume of NaOH solution required can be calculated as:Volume of NaOH solution (in liters) = moles of lactate / 1.000 M

       This volume can be converted to microliters if desired.

Again, note that it is important to add the NaOH solution slowly and carefully while monitoring the pH to avoid overshooting the desired pH of the buffer.

Learn more about buffer

brainly.com/question/22821585

#SPJ11

The pH of the 19.0 mL sample of 0.455 M aqueous hypochlorous acid solution is approximately 4.49.

To determine the pH at the start of the titration, before any potassium hydroxide has been added, we can use the following steps:

1. Identify the given information:
- Volume of hypochlorous acid (HOCl) solution = 19.0 mL
- Molarity of hypochlorous acid (HOCl) solution = 0.455 M

2. Write the dissociation reaction for hypochlorous acid:
HOCl ⇌ H+ + OCl-

3. Use the Ka expression to calculate the pH:
Ka = [H+][OCl-] / [HOCl]
For hypochlorous acid, Ka = 3.5 x 10^-8

4. Set up an ICE table:
 Initial:      0.455 M      0 M        0 M
 Change:       -x          +x         +x
 Equilibrium: 0.455-x M     x M        x M

5. Substitute the values into the Ka expression:
(3.5 x 10^-8) = (x)(x) / (0.455 - x)

6. Solve for x (assuming x is small compared to 0.455, so 0.455 - x ≈ 0.455):
x = √((3.5 x 10^-8) * 0.455) ≈ 3.22 x 10^-5 M

7. Calculate the pH:
pH = -log[H+] = -log(3.22 x 10^-5) ≈ 4.49

At the start of the titration, before any potassium hydroxide has been added, the pH of the 19.0 mL sample of 0.455 M aqueous hypochlorous acid solution is approximately 4.49.

Learn more about pH here:

brainly.com/question/28133567

#SPJ11

To find the moles of the gas , we can use the ideal gas law. Which states -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

Where:-

As per question, we are given that-

Now that we have all the required values, so we can put them all in the Ideal gas law formula and solve for moles -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 1.55 \times 58 = n \times 0.0821 \times 222\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 89.9 = n \times 18.2262\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf n \times 18.2262 =89.9\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n = \dfrac{89.9}{18.2262}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n =4.9324......\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{n =4.93 \:moles }\\[/tex]

Therefore, 4.93 moles of gas will be occupied 58 L at a pressure of 1.55 atmospheres and a temperature of 222 k

Sodium phosphate and calcium chloride reacts to form sodium chloride and calcium phosphate. If we have 379.4 grams of calcium chloride and an excess of sodium phosphate, we can make 353.3g of calcium phosphate.

The balanced chemical equation of sodium phosphate and calcium chloride to form sodium chloride and calcium phosphate is given as

2Na₃PO₄ + 3CaCl₂ → 6NaCl + Ca₃(PO₄)₂

We will convert given grams of calcium chloride into moles.

Using mol ratio, the moles of calcium phosphate are calculated and converted to grams as:

we know that,

Molar mass of calcium chloride is 110.98 gram /mol

And molar mass of calcium phosphate is 310 gram/mol.

By using dimensional analysis we get:

=379.4 g CaCl₂ (1 mol CaCl₂/ 110.98gCaCl₂)(1 molCa₃(PO₄)₂/3 molCaCl₂ )(310gCa₃(PO₄)₂/1 mol Ca₃(PO₄)₂)

=353.3 g Ca₃(PO₄)₂

Thus, 353.3 grams of calcium phosphate can be formed from the reaction

To know more about calcium phosphate here

https://brainly.com/question/2396369

#SPJ4

The complete question should be:

Sodium phosphate and calcium chloride react to form sodium chloride and calcium phosphate. If you have 379.4 grams of calcium chloride and an excess of sodium phosphate, how much calcium phosphate can you make?

The given statement "A precipitate of lead(ii)chloride forms when 200.0 mg of NaCl is dissolved in 0.250 l of 0.12 m lead(ii)nitrate" is true because the ion product, Q, exceeds the solubility product constant, Ksp, for lead(II) chloride.

The first step in solving this problem is to determine whether or not a precipitate of lead(II) chloride will form. This can be done by calculating the ion product, Q, and comparing it to the solubility product, Ksp.

The balanced equation for the reaction is:

Pb(NO₃)₂ + 2NaCl → PbCl₂ + 2NaNO₃

From the equation, we can see that 1 mol of Pb(NO₃)₂ reacts with 2 mol of NaCl to form 1 mol of PbCl₂. Therefore, the moles of Pb(NO₃)₂ in the solution are:

0.12 mol/L x 0.250 L = 0.030 mol

The moles of NaCl in the solution are:

(200.0 mg / 58.44 g/mol) / 0.250 L = 0.0136 mol

Since there are 2 moles of NaCl for every 1 mole of Pb(NO₃)₂, the limiting reactant is NaCl, and all of it will react. This means that 0.0136 mol of PbCl₂ will be formed.

Now, we can calculate the ion product, Q, using the concentrations of Pb²⁺ and Cl⁻ ions in the solution:

[Pb²⁺] = 0.0136 mol / 0.250 L = 0.0544 M

[Cl⁻] = 2 x 0.0136 mol / 0.250 L = 0.109 M

Q = [Pb²⁺][Cl⁻]² = 0.0544 M x (0.109 M)² = 0.000654

Since Q < Ksp, a precipitate of PbCl² will form.

This problem involves the use of the solubility product, Ksp, which is a measure of the maximum amount of a compound that can dissolve in a solution at a given temperature. If the ion product, Q, exceeds Ksp, a precipitate will form.

In this case, we are given the Ksp of PbCl₂, which is 1.7 x 10⁻⁵. We are also given the concentration of Pb(NO₃)₂ and the mass of NaCl, from which we can calculate its concentration. Using these values, we can determine the moles of PbCl₂ that will be formed and the concentrations of Pb²⁺ and Cl⁻ ions in the solution. Finally, we calculate Q and compare it to Ksp to determine whether or not a precipitate will form.

To know more about the Precipitate, here

https://brainly.com/question/29342832

#SPJ4

6.55 ml of [tex]NaHCO_{3}[/tex] should be added to get a pH 7 buffer. This is calculated using the expression of pH.

Volume of [tex]NaHCO_{3}[/tex] is 7.5ml

Concentration of [tex]NaHCO_{3}[/tex]  is 0.46M

Concentration of HCL is  0.10M

Volume of HCL needed taken as y.

We have to find the initial moles of [tex]NaHCO_{3}[/tex] moles= molarity × volume

0.46×7.5 / 1000 = 0.00345 moles

We have to find the moles of HCL added

0.1 × y / 1000=0.0001 y moles

[tex]NaHCO_{3}[/tex]+HCl→H2CO3+NaCl

The number of moles for[tex]NaHCO_{3}[/tex] left = (0.00345−0.0001y)

The number of moles for HCL formed = number of moles for HCL added = 0.0001y

PH= pka1 + log [tex]NaHCO_{3}[/tex]] / [[tex]H2CO_{3}[/tex]]

7   =  6.37 + log ( 0.00345−0.0001y) / 0.00001y

The volume of the 0.10 M HCL= y = 6.55 ml.

To learn more about pH

https://brainly.com/question/26424076

#SPJ4

A. Balanced reactions and reaction type is given below as asked in question above :

C₂H₂ + 5 O₂ → 4 CO₂ + 2 H₂O (combustion)

2 NaOH + Cl₂ → NaCl + NaClO + H₂O (double-displacement)

Fe + 2 HCl → FeCl₂ + H₂ (single-displacement)

P₄ + 5 O₂ → P₄O₁₀ (synthesis)

2 Fe + 2 NaOH + H₂O → 2 Fe(OH)₂ + 2 Na⁺ (double-displacement)

2 NaHCO₃ → 2 NaNO₃ + H₂O + 2 CO₂ (decomposition)

B. Reaction type:

3 Na₃PO₄ + K₃PO₄ → 6 NaOH + 2 K₃PO₄ (double-displacement)

PbSO₄ + Fe → Pb + FeSO₄ (single-displacement)

B₂O₃ + 6 HF → 2 BF₃ + 3 H₂O (double-displacement)

2 Al + 6 HCl → 2 AlCl₃ + 3 H₂ (single-displacement)

2 H₂O₂ → O₂ + 2 H₂O (decomposition)

Fe(OH)₃ + 3 NaCl → FeCl₃ + 3 NaOH (double-displacement)

To know more about double-displacement, visit:

https://brainly.com/question/29307794

#SPJ1

Answer:

A)  44.0 g of CO₂

Explanation:

Avogadro's number is a constant that represents the number of particles in one mole of a substance. It is defined as exactly 6.02214076 × 10²³ particles per mole.

To determine which quantity contains Avogadro's number of molecules, calculate the molar mass of each compound, then use the number of molecules formula to find the number of molecules of the substance.

[tex]\boxed{\begin{minipage}{7 cm}\underline{Number of molecules}\\\\$\dfrac{m}{M} \times 6.02214076 \times 10^{23}$\\\\where:\\\phantom{ww}$\bullet$ $M =$ molar mass.\\ \phantom{ww}$\bullet$ $m =$ mass of a substance (in grams)\\\end{minipage}}[/tex]

[tex]\hrulefill[/tex]

CO₂ is a chemical compound made up of molecules that each have one carbon atom (C) and two oxygen atoms (O₂).

Atomic mass of carbon is 12.011 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of CO₂ is:

= C + 2O

= 12.011 + 2 × 15.999

= 44.009 g/mol

Given there is 44.0 g of CO₂, the number of molecules of CO₂ is:

[tex]\implies \dfrac{44}{44.009}\times 6.02214076 \times 10^{23}=6.02 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

NH₃ is a chemical compound made up of molecules that each have one nitrogen atom (N) and three hydrogen atoms (H₃).

Atomic mass of nitrogen is 14.0067 amu.

Atomic mass of hydrogen is 1.00784 amu.

Therefore, the molar mass of NH₃ is:

= N + 3H

= 14.0067 + 3 × 1.00784

= 17.03022 g/mol

Given there is 20.0 g of NH₃, the number of molecules of NH₃ is:

[tex]\implies \dfrac{20}{17.03022}\times 6.02214076 \times 10^{23}=7.07 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

H₂O is a chemical compound made up of molecules that each have two hydrogen atoms (H₂) and one oxygen atom (O).

Atomic mass of hydrogen is 1.00784 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of H₂O is:

= 2H + O

= 2 × 1.00784 + 15.999

= 18.01468 g/mol

Given there is 9.01 g of H₂O, the number of molecules of H₂O is:

[tex]\implies \dfrac{9.01}{18.01468}\times 6.02214076 \times 10^{23}=3.01 \times10^{23}[/tex]

[tex]\hrulefill[/tex]

H₂SO₄ is a chemical compound made up of molecules that each have two hydrogen atoms (H₂), one sulphur atom (S) and four oxygen atoms (O).

Atomic mass of hydrogen is 1.00784 amu.

Atomic mass of sulphur is 32.065 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of H₂SO₄ is:

= 2H + S + 4O

= 2 × 1.00784 + 1 × 32.065 + 4 × 15.999

= 98.07668 g/mol

Given there is 108.0 g of H₂SO₄, the number of molecules of H₂SO₄ is:

[tex]\implies \dfrac{108.0}{98.07668}\times 6.02214076 \times 10^{23}=6.63 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

44.0 g of CO₂ = 6.02 × 10²³ molecules (3 s.f.)

20.0 g of NH₃ = 7.07 × 10²³ molecules (3 s.f.)

9.01 g of H₂O = 3.01 × 10²³ molecules (3 s.f.)

108.0 g of H₂SO₄ = 6.63 × 10²³ molecules (3 s.f.)

As Avogadro's number of molecules is 6.02 × 10²³ to three significant figures, the quantity that contains the same number of molecules is:

The quantity that contains Avogadro's number of molecules is 44.0 g of CO₂. Therefore, option A is correct.

Avogadro's number is a constant that represents the number of particles (atoms, molecules, ions, etc.) in one mole of a substance. It is equal to 6.022 × 10²³.

CO₂ (carbon dioxide) has a molar mass of approximately 44.01 g/mol. Therefore, 44.0 g of CO₂ corresponds to 1 mole of CO₂, which contains Avogadro's number of molecules.

NH₃ (ammonia) has a molar mass of 17.03 g/mol. Therefore, 20.0 g of NH₃ corresponds to 1.17 moles of NH₃, which is less than Avogadro's number of molecules.

H₂O (water) has a molar mass of 18.02 g/mol. Therefore, 9.01 g of H₂O corresponds to 0.5 moles of H₂O, which is less than Avogadro's number of molecules.

Sulfuric acid has a molar mass of 98.09 g/mol. Therefore, 108.0 g of H₂SO₄ corresponds to 1.1 moles of H₂SO₄, which is less than Avogadro's number of molecules.

To learn more about the Avogadro's number, follow the link:

https://brainly.com/question/16348863

#SPJ6

The pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L is approximately 14.14 atm.

We can use Boyle's law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature, to solve this problem. The equation for Boyle's law is:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume of the gas, and P2 and V2 are the final pressure and volume of the gas.

In this problem, we have:

P1 = 2.5 atm (the initial pressure of the air)

V1 = 198 L (the initial volume of the air)

V2 = 35 L (the final volume of the air, after compression)

We need to find P2, the final pressure of the air after compression. To do so, we can rearrange Boyle's law equation to solve for P2:

P2 = P1V1/V2

Substituting the values given, we get:

P2 = 2.5 atm x 198 L / 35 L

P2 = 14.14 atm (rounded to two decimal places)

The pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L is approximately 14.14 atm.

learn more about pressure here

https://brainly.com/question/24719118

#SPJ1

Neither Tech A nor Tech B is correct in their statements about carbon monoxide and oxides of nitrogen.

Carbon monoxide (CO) is a toxic gas that is produced when fuel is incompletely burned, meaning that there is not enough oxygen present to fully oxidize the carbon in the fuel to carbon dioxide (CO₂). Therefore, Tech A is incorrect in saying that carbon monoxide is partially burned fuel. Instead, carbon monoxide is a product of incomplete combustion.

Oxides of nitrogen (NOx) are a group of gases that are formed during the combustion of fuels at high temperatures. They are not unburned fuel, but rather a product of chemical reactions between the nitrogen and oxygen in the air when exposed to high heat during combustion. Therefore, Tech B is also incorrect in saying that oxides of nitrogen are unburned fuel.

To know more about unburned fuel here

https://brainly.com/question/12068948

#SPJ4

When solid ammonium hydrogen carbonate is added to water, the following process occurs: (NH₄)HCO₃(s)  NH₄+(aq) + HCO₃-(aq).

When dissolved in water, the soluble ionic compound ammonium carbonate (NH₄)2CO₃ fully dissociates into ammonium cations (NH⁺⁴) and carbonate anions (CO₂). All is well so far. The hydrolysis of the ammonium ion produces ammonia, NH₃, and hydronium ions, H₃O+.

The balanced equation states that warmth causes ammonium carbonate to break down: NH₃(g) + CO₂(g) + H₂O = (NH₄)2CO₃(s)( g) Determine the total volume of gas created by the full breakdown of 11.83 g of ammonium carbonate at 22 °C and 1.02 atm.

To know more about ammonium hydrogen visit:-

https://brainly.com/question/15252971

#SPJ9

Ink's RF values are computed. Blue Ink has an average retention factor Rf value of 0.82 in 15 minutes, 0.87 in 30 minutes, and 0.86 in 60 minutes at room temperature.

The ratio of the spot's elevation above the origin to the solvent front's elevation above the origin is the retention factor for a given substance.

The identification and properties of the various compounds can be established using the Rf values. Since more polar chemicals have a larger attraction for the polar solid phase, they will have smaller Rf values.

The retention factor (Rf value) in chromatography is significant because it can be used to anticipate where a specific material would appear on the chromatogram.

To know about retention factor

https://brainly.com/question/30160568

#SPJ4

The partial pressure of [tex]O_{2}[/tex] is  2.53 atm  which is calculated using the Ideal gas law.

We can use the ideal gas law to find the total moles of gas present

PV = n RT

n = PV/RT

  = (4.90 atm.) (3.00 L)/(0.0821 L atm. / K mole ) (273K)

n is the 0.656 moles of gas

Now we have to find the pressure of N2

mole fraction N2 = 0.270 mole/0.656 mole

                            = 0.412

Pressure of N2 gas is equals to,

                         =  mole fraction x total pressure

                         = 0.412 x 4.90

                         = 2.02 atm.

We know that the  total pressure = pressure O2 + pressure N2 + pressure CO2

Now we have to find the partial pressure O2.

  = 4.90 atm. - 2.02 atm. - 0.350 atm.

  = 2.53 atm.

To learn more about the Ideal gas law

https://brainly.com/question/15132707

#SPJ4

The correct question is,

Suppose that Daniel has a 3.00 L bottle that contains a mixture of O2 , N2 and CO2 under a total pressure of 4.90 atm. He knows that the mixture contains 0.270 mole N2 and that the partial pressure of CO2 is 0.350  atm. If the temperature is 273  K, what is the partial pressure of O2 ?