In ΔVWX, v = 33 inches, w = 57 inches and ∠X=147°. Find ∠W, to the nearest degree.

The wrestler's weight before he went on his diet was 78.0 kilograms.

What is y-intercept?

In the context of a graph of a function, the y-intercept is the point where the graph intersects the y-axis. It is the value of the dependent variable (y) when the independent variable (x) is zero. Geometrically, the y-intercept is the value of the function at the point where it crosses the y-axis.

To determine the wrestler's weight before he went on his diet, we need to find the y-intercept of the linear function that represents his weight gain over time. This is because the y-intercept corresponds to the initial weight of the wrestler, i.e., his weight before he started his diet.

We can use the two data points where the time is 0 (i.e., at the start of the diet) to find the slope of the linear function:

(1.5, 85.8) and (3.0, 93.6)

The change in weight over the time interval of 1.5 to 3.0 months is:

93.6 - 85.8 = 7.8

The change in time over that interval is:

3.0 - 1.5 = 1.5

So the slope of the linear function is:

7.8 / 1.5 = 5.2

Now we can use the point-slope form of a linear function to write an equation for the wrestler's weight gain over time:

y - 85.8 = 5.2(x - 1.5)

where y represents the wrestler's weight and x represents the time in months.

To find the wrestler's weight before he went on his diet, we need to evaluate this equation at x = 0:

y - 85.8 = 5.2(0 - 1.5)

y - 85.8 = -7.8

y = 78.0

Therefore, the wrestler's weight before he went on his diet was 78.0 kilograms.

To learn more about y-intercept, visit the link:

https://brainly.com/question/29501432

#SPJ9

Answer:

To find the volume of Leah's new planter, we need to multiply the length, width, and height of the container:

V = 15 m x 4 m x 8 m x 11 m x 3 m

V = 11,880 cubic meters

Therefore, the total volume of Leah's new planter is 11,880 cubic meters.

Let's represent the volume of the large box as x cubic inches. Since the total volume of both boxes is 212 cubic inches, we can set up the following equation:

8 x 4 x 2 + x = 212

Simplifying the left side, we get:

64 + x = 212

Subtracting 64 from both sides, we get:

x = 148

Therefore, the volume of the large box is 148 cubic inches.

Answer:

3. 216 cm^3

4a. A = 5 ft, B = 4 ft.

4b. 88 ft^3

Step-by-step explanation:

3. Separate into two rectangular prisms:

Volume of first one: 4cm*2cm*3cm = 24cm^3

Volume of second one: 4cm*12cm*4cm = 192cm^3

Add them together: 24 + 192 = 216cm^3

4a.

Length A = 8-3 = 5ft.

Width B = 8-4 = 4ft.

4b. Separate into two rectangular prisms:

Volume of first one: 2ft*3ft*4ft = 24ft^3

Volume of second one: 8ft*4ft*2ft = 64ft^3

Add them together: 24 + 64 = 88ft^3

Answer:

Step-by-step explanation: To find (f+g)(x), we simply add the two functions:

(f+g)(x) = f(x) + g(x)

= (3x - 5) + (7x - 3)

= 10x - 8

Therefore, (f+g)(x) = 10x - 8.

To find (f-g)(x), we subtract g(x) from f(x):

(f-g)(x) = f(x) - g(x)

= (3x - 5) - (7x - 3)

= -4x - 8

Therefore, (f-g)(x) = -4x - 8.

Answer: He has one left

Step-by-step explanation: 2-1=1

Answer:

y = x + 1

Step-by-step explanation:

i dont rlly have an explanation, i mean its just that

Therefore, the estimated length of the diagonal is approximately 1.414 units.

The square root of a number is a value that, when multiplied by itself, gives the original number. In other words, the square root of a number "x" is a value "y" such that y multiplied by y equals x. The symbol for square root is √.

For example, the square root of 25 is 5, because 5 multiplied by 5 equals 25. Similarly, the square root of 64 is 8, because 8 multiplied by 8 equals 64. The square root of a negative number is not a real number, as there is no real number that, when squared, equals a negative number.

Using the Pythagorean theorem, we can find the length of the diagonal of the square.

If we draw a diagonal from one corner of the square to the opposite corner, we create a right triangle. The two legs of the right triangle are the sides of the square, which have a length of 1. The hypotenuse, which is the diagonal of the square, is the side we are trying to find.

Using the Pythagorean theorem, we can write:

[tex]d^2 = 1^2 + 1^2[/tex]

where d is the length of the diagonal.

Simplifying, we get:

[tex]d^2 = 2[/tex]

Taking the square root of both sides, we get:

d ≈ 1.414

To know more about right triangle, visit

https://brainly.com/question/15490304

#SPJ1

It's tough to know for sure what a black dot on the sea might mean without more information. A ship, boat, or other watercraft may occasionally be indicated by a black dot on the water.

Depending on the situation, a black dot on the sea could mean a variety of various things. Here are some potential examples:

A black dot on a nautical chart could represent a buoy, beacon, marker, or other navigating aid.

A black dot in the ocean may be the result of a bird, a fish jumping out of the water, or other marine life, depending on your distance.

A black dot may represent the existence of a microscopic organism or particle if you are using a microscope or other scientific equipment to see the ocean.

Therefore, 1. Pacific Ocean 2. South Carolina 3. Georgia 4. Alabama 5. (x,y) ----> (x+4,y-10) 6. Colorado 7. Pennsylvania 8. Minnesota and Wisconsin, 8. Missouri 9. Reflect over y-axis and then reflect over x-axis.

10. Oregon 11. Kansas or Oklahoma, 12. Tennessee

Learn more about sea here:

https://brainly.com/question/3762397

#SPJ1

Answer:

y ≥ -x + 2

y < 2x - 1

Step-by-step explanation:

Solid line:

y ≥ -x + 2

Dashed line:

y < 2x - 1

The system of inequalities associated with the graph is y ≥ 2 and x < 3.

The system of inequalities associated with the graph can be determined by examining the shaded region on the graph. The shaded region represents all the possible solutions that satisfy the given inequalities. To determine the system of inequalities, we need to consider the boundaries of the shaded region. These boundaries are formed by the lines or curves on the graph.

1. Identify the lines or curves that form the boundaries of the shaded region. These lines or curves are usually represented by equations or inequalities. For example, if there is a solid line, it indicates that the boundary is included in the solution. If there is a dashed line, it indicates that the boundary is not included in the solution.

2. Determine the inequalities associated with each boundary line or curve. You can do this by examining the direction of the inequality symbol (<, >, ≤, or ≥) and the location of the line or curve in relation to the shaded region.

3. Write down the inequalities associated with each boundary line or curve. Make sure to include the correct inequality symbol and any necessary constants or variables.

4. Combine all the inequalities together to form the system of inequalities. This can be done by using logical operators such as "and" or "or" to connect the individual inequalities. The "and" operator is used when all the inequalities must be satisfied simultaneously, while the "or" operator is used when at least one of the inequalities must be satisfied. For example, let's say the graph has a solid horizontal line at y = 2, a dashed vertical line at x = 3, and the shaded region is above the horizontal line and to the left of the vertical line. In this case, the system of inequalities would be: - y ≥ 2 (since the shaded region is above the line) - x < 3 (since the shaded region is to the left of the line) Therefore, the system of inequalities associated with the graph is y ≥ 2 and x < 3.

To know more about inequalities here

https://brainly.com/question/30238989

#SPJ2

1. {0, 1, 3, 4, 6}; 2. {4, 6}.

Step-by-step explanation:

1. А={0, 1, 2, 3}, B={2, 4, 5, 6}, C={2, 5, 7, 9}; (A∪B)-(B∩C)-?

a) A∪B⇔{0, 1, 2, 3, 4, 5, 6};

b) B∩C⇔{2, 5};

c) (A∪B)-(B∩C)⇒{0, 1, 3, 4, 6}.

2. A={4, 6, 8, 10}, B={4, 6, 8}, C={1, 2, 3, 4, 7}, D={3, 5, 6, 7}; A∩(D∪(B∩C))=?

a) B∩C⇔{4};

b) D∪(B∩C)⇔{3, 4, 5, 6, 7};

c) A∩(D∪(B∩C))⇒{4, 6}.

The highest point of the quadratic equation that opens down can be (-5, 8)

We have a quadratic equation whose graph opens downwards, and we know that it also passes through the points (-2,5) and (-8, 5).

The highest point will be of the form (x, y).

Such that y is larger than 5, and the value of x is right between the two values above:

x = (-2 - 8)/2

x = -5

So the point is of the form (-5, y) where again y  > 5.

From the given options the only of this form is (-5, 8)

Learn more about quadratic equations at:

https://brainly.com/question/1214333

#SPJ1

Answer:

The answer is A

Step-by-step explanation:

You can use a graphing calculator (geogebra) It works

a)  If I randomly catch any one fish from this tank, the probability of catching a medium-sized fish from the tank is 0.3182.
b) the probability of catching a medium-sized guppy from the tank is 0.1391.

c) the probability of catching a guppy if we randomly select a medium-sized fish from the tank is 0.4375.

d) the probability of catching a medium-sized guppy if we randomly select a guppy from the tank is 0.3206.

e)  the probability of catching a fish that is not a goldfish if we randomly select a fish from the tank is 0.6291.
f) 0.1384 is not equal to 0.1391, which indicates that the two events are not independent

Probability is a measure of the likelihood or chance of an event occurring, expressed as a number between 0 and 1, with 0 indicating impossibility and 1 indicating certainty.

The explanation to the above probability answer are given below:

a)

From the contingency table, we can see that the total number of medium-sized fish is 96. The total number of fish in the tank is 302. Therefore, the probability of catching a medium-sized fish is:

Probability of catching a medium-sized fish = Total number of medium-sized fish / Total number of fish

Probability of catching a medium-sized fish = 96 / 302

Probability of catching a medium-sized fish = 0.3182

Therefore, the probability of catching a medium-sized fish from the tank is 0.3182

b)
From the contingency table, we can see that the total number of medium-sized guppies is 42. The total number of fish in the tank is 302. Therefore, the probability of catching a medium-sized guppy is:

Probability of catching a medium-sized guppy = Total number of medium-sized guppies / Total number of fish

Probability of catching a medium-sized guppy = 42 / 302

Probability of catching a medium-sized guppy = 0.1391

Therefore, the probability of catching a medium-sized guppy from the tank is 0.1391.

c)

From the contingency table, we can see that the number of medium-sized guppies is 42, and the number of medium-sized fish is 96. Therefore, the probability of catching a guppy if we randomly select a medium-sized fish is:

Probability of catching a guppy given a medium-sized fish = Number of medium-sized guppies / Total number of medium-sized fish

Probability of catching a guppy given a medium-sized fish = 42 / 96

Probability of catching a guppy given a medium-sized fish = 0.4375

Therefore, the probability of catching a guppy if we randomly select a medium-sized fish from the tank is 0.4375.

d)
To calculate the probability of catching a medium-sized guppy if we randomly select a guppy from the tank, we need to find the number of medium-sized guppies in the tank and divide it by the total number of guppies in the tank.

From the contingency table, we can see that the number of medium-sized guppies is 42, and the total number of guppies is 131. Therefore, the probability of catching a medium-sized guppy if we randomly select a guppy from the tank is:

Probability of catching a medium-sized guppy given a guppy = Number of medium-sized guppies / Total number of guppies

Probability of catching a medium-sized guppy given a guppy = 42 / 131

Probability of catching a medium-sized guppy given a guppy = 0.3206

Therefore, the probability of catching a medium-sized guppy if we randomly select a guppy from the tank is 0.3206.


e)

From the contingency table, we can see that the total number of non-goldfish is 190 (45 medium goldfish + 70 small guppy + 42 medium guppy + 9 medium gourami + 10 large gourami + 14 small gourami). The total number of fish in the tank is 302. Therefore, the probability of catching a fish that is not a goldfish is:

Probability of catching a fish that is not a goldfish = Total number of non-goldfish / Total number of fish

Probability of catching a fish that is not a goldfish = 190 / 302

Probability of catching a fish that is not a goldfish = 0.6291

Therefore, the probability of catching a fish that is not a goldfish if we randomly select a fish from the tank is 0.6291.

f)

From the contingency table, we can see that the probability of randomly catching a guppy is 131/302, which is approximately 0.4344. Similarly, the probability of randomly catching a medium-sized fish is 96/302, which is approximately 0.3182.

Now, let's consider the joint probability of randomly catching a medium-sized guppy, which we calculated earlier to be 42/302, or approximately 0.1391. To determine if the events are independent, we need to compare the product of the probabilities of the individual events (catching a guppy and catching a medium-sized fish) to the joint probability of the events occurring together.

If the events are independent, then the product of their individual probabilities should be equal to the joint probability:

P(catching a guppy) x P(catching a medium-sized fish)
= P(catching a medium-sized guppy)

0.4344 x 0.3182 = 0.1391

0.1384 is not equal to 0.1391, which indicates that the two events are not independent.

Learn more about probability:
https://brainly.com/question/29381779
#SPJ1

The perimeter of the figure is approximately 63.6 meters, since the lengths of all the sides add up to the figure's perimeter.

Perimeter is the total length of the boundary of a closed 2-dimensional shape. In other words, it is the distance around the edge of a shape. The perimeter is usually measured in units such as meters, centimeters, feet, or inches depending on the measurement system used. The perimeter can be calculated by adding up the lengths of all the sides of the shape.

Since opposite sides of a parallelogram are equal in length, the length of the straight side of the first parallelogram is:

Length of first parallelogram = 9m

Similarly, the length of the straight side of the second parallelogram is:

Length of second parallelogram = 11m

Now, let's find the length of the straight side of the semicircle segment. We are given that the other side of each parallelogram gets half of the diameter, which is 17m. Therefore, the length of the straight side of the semicircle segment is:

Length of semicircle segment = 17m / 2 = 8.5m

The lengths of all the sides add up to the figure's perimeter. Let's use P to represent the perimeter. Then:

P = 2 (parallelogram length) + semicircle length

When we replace the values we discovered earlier, we obtain:

P = 2(9m + 11m) + π(17m)/2

= 38m + 8.5πm

≈ 63.6m (using π ≈ 3.14)

To know more about parallelogram, visit:

https://brainly.com/question/29147156

#SPJ9

answer:

The number is 9

Step-by-step explanation:

9 × 7 = 63

63 - 13 = 50

9×5 = 45

45 + 5 = 50

Answer:

Parameter estimates

The coefficient for Px (-5) suggests that there is an inverse relationship between the price of the fruit drink and the quantity demanded. In other words, as the price of the drink increases, the quantity demanded decreases.

The coefficient for M (0.001) suggests that there is a positive relationship between the median annual family income and the quantity demanded. In other words, as the median income increases, the quantity demanded also increases.

The coefficient for Py (10) suggests that there is a positive relationship between the price of the competing brand of fruit drink and the quantity demanded for this brand. In other words, as the price of the competing brand increases, the quantity demanded for this brand also increases.

Step-by-step explanation:

To calculate the monthly consumption of the fruit drink, we plug in the given values into the demand equation,

Qx = 10 - 5(2) + 0.001(20,000) + 10(2.5)

Qx = 10 - 10 + 20 + 25

Qx = 45 liters per family per month.

Therefore, the monthly consumption of the fruit drink per family is 45 liters.

If the median annual family income increased to $30,000, then the new monthly consumption of the fruit drink per family can be calculated as follows,

Qx = 10 - 5(2) + 0.001(30,000) + 10(2.5)

Qx = 10 - 10 + 30 + 25

Qx = 55 liters per family per month.

Therefore, the monthly consumption of the fruit drink per family would increase from 45 liters to 55 liters per family per month.

To determine the demand function, we need to solve for Qx in terms of the other variables,

Qx = 10 - 5Px + 0.001M + 10Py

Qx - 10Py = 10 - 5Px + 0.001M

Qx = (10 - 5Px + 0.001M) / 10Py

Therefore, the demand function is:

Qx = (10 - 5Px + 0.001M) / 10Py

To find the inverse demand function, we need to solve for Px in terms of Qx.

Qx = 10 - 5Px + 0.001M + 10Py

5Px = 10 - Qx - 0.001M - 10Py

Px = (10 - Qx - 0.001M - 10Py) / 5

Therefore, the inverse demand function is,

Px = (10 - Qx - 0.001M - 10Py) / 5

Answer:

1st -pentagon -regular

2nd -hexagon -irregular

3rd -octagon -irregular

The volume of the pyramid is V = (1/3) (3²) (5) = 45 cm³ thus the rate at which the water level is rising when the water level is 3 cm is 45 cm³/sec.

Volume is a measure of the amount of space that an object occupies or contains. It is measured in terms of cubic units, such as cubic metres or cubic centimetres. Volume is a three dimensional measure, which means it takes into account the length, width and height of an object.

The rate at which the water level is rising when the water level is 3 cm can be calculated using the formula for the volume of a pyramid. The formula for the volume of a pyramid is V = (1/3) bh², where b is the area of the base and h is the height. In this case, the base is a square with sides of length 3 cm and the height is 5 cm. Therefore, the volume of the pyramid is V = (1/3) (3²) (5) = 45 cm³.

Since the water is being filled at a constant rate of 45 cm³/sec, then the rate at which the water level is rising when the water level is 3 cm is 45 cm³/sec. This is because the water level is rising at the same rate at which the water is being filled, and since the water is being filled at a rate of 45 cm³/sec, the water level is also rising at the same rate. This is why the rate at which the water level is rising when the water level is 3 cm is 45 cm³/sec.

For more questions related to pyramid

https://brainly.com/question/218706

#SPJ1

The quadratic function for the given graph is f(x) = -(x - 0.2)² + 6.2.

What is a quadratic function?

A polynomial function with one or more variables, where the largest exponent of the variable is two, is referred to as a quadratic function. It is also known as the polynomial of degree 2 since the greatest degree term in a quadratic function is of second degree.

The graph crosses the y-axis at 6 so the graph has a y-intercept at (0,6).

The highest point in the graph is at (0.2,6.2) and the highest point is the maximum.

The graph crosses the x-axis at 2 and -1.5 so the graph has an x-intercept at (2,-1.5).

The graph's line of symmetry is x = 0.2 since the vertex is (0.2,6.2).

The zeros of a graph are its x-intercept so the graph has zeroes of 2 and -1.5.

The quadratic function is of the form a(x - h)² + k where (h, k) is the vertex.

Since, the graph is opening downwards so the value of a = -1 < 0.

The function f(x) = -(x - 0.2)² + 6.2 is the quadratic function of the graph.

Therefore, the function is obtained to be -(x - 0.2)² + 6.2.

To learn more about quadratic function from the given link

https://brainly.com/question/25841119

#SPJ1

In 2012, a company made $410,000 in sales in Seattle but only making $255,000 in sales in Portland. Fulfill each of the following claims:

a. Seattle outsold Portland in sales by 60.78%.

b. Portland's sales lagged Seattle's by 60.78%.

c. Sales in Portland were 62.2% of those in Seattle.

a. Seattle's sales were ___% larger than Portland's.

To calculate the percentage difference between the two sales figures, we can use the following formula:

Percentage difference = ((larger value - smaller value) / smaller value) x 100%

Substituting the values, we get:

Percentage difference = ((410,000 - 255,000) / 255,000) x 100%

Percentage difference = 155,000 / 255,000 x 100%

Percentage difference = 0.6078 x 100%

Percentage difference = 60.78%

Therefore, Seattle's sales were 60.78% larger than Portland's.

b. The sales in Portland were ___% less than those in Seattle.

Since Portland's sales were smaller than Seattle's, we can simply use the percentage difference we calculated above to find the percentage by which Portland's sales were smaller:

Portland sales were 60.78% smaller than Seattle's.

c. Portland sales were ___ % of Seattle's.

To calculate the percentage of Seattle's sales that Portland's sales represent, we can use the following formula:

Percentage = (smaller value / larger value) x 100%

Percentage = 0.62195 x 100%

Substituting the values, we get:

Percentage = (255,000 / 410,000) x 100%

Percentage = 62.2%

Therefore, Portland's sales were 62.2% of Seattle's.

To learn more about percentage difference, refer:-

https://brainly.com/question/30404837

#SPJ1

Answer:

The answer would be $49.01

Step-by-step explanation:

Answer:

x-5=0

10=2x

(1/2)x=10

x>2=25

Step-by-step explanation:

all of these are x=5

the ones that are wrong are 11-x=3 and 1+x=5

Therefore, the x-coordinate is 1/2.

A coordinate is a value that represents a point's position in a given system of reference. In two-dimensional (2D) space, coordinates typically consist of two values, x and y, that represent the point's position along the horizontal and vertical axes, respectively.

Given by the question.

To find the x-coordinate of the point where the terminal side intersects the unit circle, we first need to determine the quadrant in which the terminal side lies based on the angle measure of 60 degrees.

Since 60 degrees is in the first quadrant (0 to 90 degrees), the x-coordinate will be positive.

Next, we can use the fact that the terminal side intersects the unit circle, which means its distance from the origin is 1.

Since the angle measure is 60 degrees, we can construct a right triangle with the terminal side as the hypotenuse, and one leg parallel to the x-axis.

The opposite side to the angle t will be sin (60), and the adjacent side to the angle t will be cos (60).

Using the trigonometric identity cos (60) = 1/2, we can see that the x-coordinate of the point where the terminal side intersects the unit circle is: cos (60) = 1/2.

To learn more about parallel:

https://brainly.com/question/16853486

#SPJ1

Therefore, each square has a side length of 1.5 cm. The perimeter of each square is 6 cm.

Perimeter is the distance around the outside of a two-dimensional shape, such as a polygon or a circle. It is the sum of the lengths of all the sides of the shape.

Here,

To calculate the perimeter of the rectangle, we need to first convert the side lengths to the same units. 1 cm 5 mm is equal to 1.5 cm, so the rectangle has dimensions 3 cm by 1.5 cm.

The perimeter of the rectangle is then:

P = 2(3 cm) + 2(1.5 cm)

= 9 cm

To divide the rectangle into two equal squares, we need to find the side length of each square.

The area of the rectangle is:

A = (3 cm)(1.5 cm)

= 4.5 cm²

Since the two squares are equal, each square has area:

A/2 = 2.25 cm²

The side length of each square can be found by taking the square root of the area:

s = √(2.25 cm²)

= 1.5 cm

The perimeter of each square is:

P = 4s

= 6 cm

To know more about perimeter,

https://brainly.com/question/7720055

#SPJ1

Answer:

Option (C)

-0.46 brother

Answer:

Option (C)

-0.46

Step-by-step explanation:

Answer:

a-no for the first triangle, because the total of the inner angles must be 180, the last angle must be 90.

b-yes- a triangle with angles 90, 50, and 40 is possible

c-yes. 65+45+70=180.

Step-by-step explanation:

Answer:

3.7

Step-by-step explanation:

1.5, 2.2, 2.8, 3.4, 5, 5.6, 6.8, 7

Q1 = 2.2+2.8 = 5.0 divided 2 = 2.5

Q3 = 5.6+6.8 = 12.40 divided 2 = 6.2

IQR = 6.2 - 2.5 = 3.7

Please vote brainliest and rate if helpful

In the triangle, x has a value of 18.

A right triangle is one with a 90 degree inner angle. The hypotenuse, which is also the side of the right triangle that faces the right angle, is its longest side. The two arms of a right angle are made up of height and base.

We know that the respective sides of the two triangles in the diagram are proportional since they resemble one another. Namely, we have

AB / AE = BC / CD

Inputting the values provided yields:

x / 12 = 9 / 6

Finding x and simplifying results in:

x = 12 * (9/6) = 18

To know more about triangle visit:-

https://brainly.com/question/2773823

#SPJ1