In India, the people who are actually not part of the caste system and are known as outsiders are the B. Untouchables.
Who are India's Untouchables ?This group of people in India are called Dalits. They were historically referred to as "untouchables" because they were considered outside of the traditional caste system, which was and still is a significant social hierarchy in India. However, the term "untouchables" is now considered derogatory and is not used officially.
Dalits are often subjected to social and economic discrimination, and they have historically been relegated to menial and low-status jobs such as manual scavenging and sanitation work.
Find out more on untouchables at https://brainly.com/question/17102921
#SPJ1
explain how gravity affects the movement of plates with two types of crust when the plates collide and how density relates to this effect.
Gravity pulls the denser plate beneath the less dense one when two plates collide. The greater the density of a plate, the more likely it is to be pulled below the other plate by gravity.
Gravity affects the movement of plates when two plates with different types of crust collide. When two plates of different densities meet, the denser plate is pushed beneath the less dense plate. This process is known as subduction and it creates mountains, volcanoes and trenches on the Earth's surface.
The density of a plate affects how it is deformed when it collides with another plate. For example, a denser plate will resist being pushed underneath the other plate and can instead cause the other plate to buckle. This buckling can create mountains or earthquakes. On the other hand, a less dense plate can be easily subducted, resulting in the formation of a trench.
When two plates with the same density collide, the plates slide horizontally past each other, forming faults. This can also cause earthquakes when the two plates become locked and built up stress is released.
Overall, gravity affects the movement of plates when they collide and the density of the plates plays a major role in the deformation that occurs. Oceanic and continental plates frequently collide, with the denser oceanic plate being pushed beneath the less dense continental plate. This causes deep-sea trenches to form on the oceanic plate's surface. The greater the density of a plate, the more likely it is to be pulled below the other plate by gravity. Because oceanic plates are denser than continental plates, they are frequently pushed beneath them.
For more such questions on Gravity.
https://brainly.com/question/1479537#
#SPJ11
__________ deserts occur at higher latitudes than hot deserts.
Cold deserts occur at higher latitudes than hot deserts.
What are deserts?A desert is a barren region with a shortage of water, low vegetation cover, and extremely dry air, which is often covered in sand or rocks. Deserts are the driest areas on the planet, receiving little precipitation.The world's deserts are divided into two types: cold deserts and hot deserts. The latitudes at which they exist distinguish between them. Cold deserts are located in higher latitudes, while hot deserts are found in low latitudes. Cold deserts are defined by their temperature, which is similar to that of hot deserts. These are high-elevation areas with low atmospheric pressure and reduced moisture due to the mountains blocking the passage of water.
Learn more about Cold deserts here: https://brainly.com/question/11839824
#SPJ11
short term changes in atmospheric variables such as temperature, wind, precipitation, and barometric pressure over a given area and period of days are an example of:
The short term changes in atmospheric variables such as temperature, wind, precipitation, and barometric pressure over a given area and period of days is an example of weather patterns.
Weather patterns are the result of large scale movement of air masses and their interaction with other meteorological factors. They determine the type of weather, like sunny days or rainy days, that a given area experiences over a period of days.
Weather patterns are formed when areas of high and low pressure interact. Air moves from areas of high pressure to areas of low pressure, creating an airflow pattern. The temperature, wind, precipitation, and barometric pressure all are affected by this airflow pattern.
Changes in these atmospheric variables depend on the strength of the pressure system and its movement. When the pressure system is strong and stationary, there is little change in the weather pattern. However, when the pressure system is weak and moving, the atmospheric variables will be more volatile.
Learn more about weather patterns here:
https://brainly.com/question/22027718
#SPJ11
he san andreas fault is... group of answer choices associated with deep focus earthquakes a world-famous example of a hot spot is an intraplate fault within the juan de fuca plate an oceanic transform fault a continental transform fault
The San Andreas Fault is a continental transform fault, which is a type of fault that occurs at the boundary between two tectonic plates.
The San Andreas Fault marks the boundary between the Pacific Plate and the North American Plate. The two plates slide past each other horizontally in opposite directions. As the plates move, they cause earthquakes with deep focus, which are powerful earthquakes that occur far beneath the surface.
An example of a world-famous hot spot is the Hawaii Islands, which form due to magma rising up from the Earth's mantle. This is a form of intraplate volcanism, which occurs at locations that are not on tectonic plate boundaries. In contrast, transform faults are located on plate boundaries, and the San Andreas Fault is a prominent example.
To learn more about San Andreas Fault here:
https://brainly.com/question/11096257#
#SPJ11
which of the common volcanic landforms is the largest in size? group of answer choices composite volcano coulee shield volcano cinder cone volcanic dome
Out of the given options, the shield volcano is the largest in size.
What is a shield volcano?
A shield volcano is a kind of volcano that is defined by its low profile and broad shape. Shield volcanoes are mostly formed by the eruption of basaltic lava, which flows quickly and spreads over a wide area.
The lava flow, when it cools, builds up the volcano's wide, gently sloping sides.
The following are the common features of a shield volcano: Lava plateau Flows of lava may take place from both the central summit and the fissures on the flanks Low angle slopes Gentle eruptions Mafic eruptions Shallow Mafic magma is the source of the volcano's lava composition Largest in size Out of the given options, the shield volcano is the largest in size.
Therefore, the correct option is B - shield volcano.
To know more about shield volcano, refer here:
https://brainly.com/question/503833
#SPJ11
Materials that can be used to repair damaged weather instruments
small islands that are geographically isolated from the mainland and have no neighboring islands are colonized through what means of dispersal?
Small islands that are geographically isolated from the mainland and have no neighboring islands are colonized through the wind or water dispersal mechanism.
The mechanism of water dispersal is a method in which seeds or spores are transported by water. During heavy rains, floods, or tsunamis, many plants' seeds are washed away by the flowing water and ultimately carried to new habitats by the water's currents.
On the other hand, the mechanism of wind dispersal is a means by which small and light seeds or spores are transported by the wind. Wind-dispersed seeds are carried by the wind over long distances and then eventually settle in new places, germinating and developing into new populations.
Animals are often responsible for transporting the seeds of plants from one location to another. They transport seeds in their digestive systems, on their fur, and in mud and dust that accumulates on their bodies.
As a result, even small islands that are geographically isolated from the mainland and have no neighboring islands are colonized over time by different means of dispersal, including wind, water, and animal dispersal.
To know more about Small islands, click on the link below:
https://brainly.com/question/14272243#
#SPJ11
what phrase(s) could you add to the concept map to connect joints to other terms, which may or may not already be present in the concept map? select all that apply.
To connect joints to other terms in the concept map, the following phrases could be added: Periosteum, Muscles, Ligaments, Tendons, Articular cartilage, Synovial membrane.
To help understand the concept better, a concept map is a graphic representation that shows how concepts are connected with each other. To make connections to other terms, phrases are used in a concept map.
For instance, joints are connected to other terms such as periosteum, muscles, ligaments, tendons, articular cartilage, and synovial membrane. This is because joints consist of these parts that enable them to move.
Joints: Joints are the places where bones connect to each other. They are made up of different parts that work together to allow movement.
Periosteum: Periosteum is a thin layer of tissue that covers the outside of bones.
Muscles: Muscles are tissues in the body that produce movement.
Ligaments: Ligaments are strong, flexible bands of tissue that connect bones to other bones.
Tendons: Tendons are tough, fibrous bands of tissue that connect muscles to bones.
Articular cartilage: Articular cartilage is a smooth, tough layer of tissue that covers the ends of bones where they come together to form joints.
Synovial membrane: Synovial membrane is a thin layer of tissue that lines the inside of joints.
To learn more about concept map, refer below:
https://brainly.com/question/29755814
#SPJ11
earthquakes in subduction zones generally only occur at depths of: multiple choice up to 700 km. 700-1000 km. greater than 700 km.
Earthquakes in subduction zones generally only occur at depths greater than 700 km.
What are earthquakes?
An earthquake is defined as a sudden and violent shaking of the Earth's surface, usually resulting from the abrupt movement of tectonic plates or volcanic activity.
Tectonic plates are rigid layers of rock that make up the Earth's crust and are responsible for the planet's movement. When two tectonic plates collide, one can slide beneath the other, producing a phenomenon known as a subduction zone.
An earthquake is a natural phenomenon that occurs when the Earth's tectonic plates shift suddenly,
resulting in the release of energy that causes the ground to shake. Earthquakes can range in size from small tremors to large quakes with devastating consequences, such as building collapse, landslides, and tsunamis.
The strength of an earthquake is measured using the Richter scale, which ranges from 1 to 10.
To know more about earthquakes in subduction zones, refer here:
https://brainly.com/question/31035804
#SPJ11
It is well known that as the CO2 levels decline, the atmospheric temperature __________.
It is not necessarily true that the atmospheric temperature will decline as the CO2 levels decline. The relationship between CO2 levels and atmospheric temperature is complex and can be affected by various factors, including natural climate cycles and human activity. However, it is generally accepted that increasing CO2 levels in the atmosphere contribute to global warming and that decreasing CO2 levels could potentially slow down or reverse this process.
It is well known that as the CO₂ levels decline, the atmospheric temperature decreases.
When carbon dioxide levels decrease, the amount of heat trapped in the atmosphere decreases as well, resulting in a drop in temperature. This is due to the fact that carbon dioxide is a greenhouse gas that contributes to the retention of heat in the atmosphere. As a result, higher levels of carbon dioxide contribute to higher atmospheric temperatures.
However, it is worth noting that other factors also influence atmospheric temperature, including variations in solar radiation, atmospheric pressure, and the presence of other greenhouse gases such as methane and water vapor. Additionally, the relationship between CO₂ levels and temperature is complex and is influenced by a number of feedback mechanisms that can either amplify or mitigate the warming effect of carbon dioxide.
Learn more about greenhouse gas at https://brainly.com/question/12684997
#SPJ11
which of the following primary pressure areas are produced by thermal factors, rather than dynamic factors? question 62 options: equatorial low and polar high equatorial low and bermuda high aleutian low and icelandic low subtropical high and subpolar low
The answer is: Equatorial low and polar high.
These two areas are primarily influenced by temperature differences, which are a type of thermal factor, rather than dynamic factors such as the movement of air masses.
what type of weather product allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams?
The type of weather product that allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams is called a Skew-T diagram. Skew-T diagrams are used to identify temperature and wind profiles in the atmosphere, helping meteorologists to make more accurate predictions about upcoming weather conditions. The diagram includes a set of lines that represent the environmental lapse rate, dry adiabatic lapse rate, and the saturation mixing ratio lines.
A Skew-T diagram is a type of graph used in meteorology to display the vertical profile of temperature, dew point, and wind in the atmosphere. It is called a "skew-T" because the temperature axis is skewed or tilted relative to the vertical axis, which allows for a larger temperature range to be displayed on the graph.
Learn more about Climograph: brainly.com/question/14088996
#SPJ11
what is the name of the accessory force helping to drive plate movement that results from a dense oceanic plate subducting?
The accessory force that helps to drive plate movement resulting from a dense oceanic plate subducting is known as the slab pull force. Slab pull is a tectonic process in which the dense oceanic lithosphere sinks into the mantle at a convergent plate boundary. This force is the most important driver of plate movement, accounting for up to 80% of the total force.
As the slab sinks, it pulls on the rest of the lithosphere, resulting in the displacement of other plates. The slab pull force is especially important in subduction zones, where one plate dives beneath another. Subduction zones are where some of the Earth's most violent geological processes, such as mountain building and volcanic eruptions, take place.
Slab pull is caused by the large gravitational pull of a dense plate as it descends into the asthenosphere. The greater the density of the plate, the stronger the slab pull. Additionally, the subducting plate acts like a wedge, pushing the other plate upwards as it sinks.
Slab pull plays an important role in the movement of plates, and its importance can be seen in plate tectonics. Without slab pull, plate motion would be slower and more variable.
To learn more about Slab pull here:
https://brainly.com/question/7350739#
#SPJ11
as transgression occurs at a given location, . choose one or more: a. sea level rises. b. the coastline migrates inland. c. sea level falls. d. the coastline migrates seaward. e. a mud layer accumulates over a sand layer.
Transgression is a term used to describe the phenomenon when the sea level rises and the coastline migrates inland. Therefore the correct option is option B.
This is a natural process that happens due to several reasons such as global warming, melting of glaciers and ice caps, and tectonic plate movements.
Transgression is the geological phenomenon that occurs when sea levels rise or land subsides, resulting in flooding and a gradual migration of coastal landforms inland.
Transgression occurs when relative sea level rises due to any one of several reasons such as melting of glaciers and ice caps, global warming, or tectonic plate movements.
Thus, transgression is a vital process that shapes our coastlines and plays a significant role in the geological history of the earth. Therefore the correct option is option B.
For such more question on Transgression:
https://brainly.com/question/30590214
#SPJ11
what is the definition of magma mixing? when magma incorporates more dissolved gases when one rising magma will overtake a second and the two intermix when rising magma melts surrounding country rock and incorporates it when magma mixes with fluids to become more dilute
Definition: The process by which two or more distinct magmas combine to form a mixture of their individual compositions is known as magma mixing.
Explanation: When two or more magmas with various compositions come into contact with one another, they mix and become one. This process can take place in a number of different ways, such as when two magmas combine and overwhelm one another or when a magma melts and integrates nearby rock or fluids. The resulting mixed magma may differ from either of the parent magmas in terms of composition, temperature, and gas content. Magma mixing is a crucial step in the development of many different kinds of igneous rocks and can shed light on a region's geological past.
learn more about magmas here:
https://brainly.com/question/16940653
#SPJ4
the photo shows a close-up of the surface of one of the sheets from the rock in part 1. note the large crystals of a dark, soft, flaky mineral. what mineral is it? choose one: a. feldspar b. biotite c. quartz d. calcite
The mineral shows in the photo is a biotite mineral. So the option B is correct.
Biotite is a dark-colored mineral that is found in metamorphic and igneous rocks. It is a common rock-forming mineral and is classified as a phyllosilicate. Biotite is composed of iron and magnesium bonded to silicon and oxygen, and it is a common constituent of mica schists and gneisses.
Biotite has a high capacity to absorb and retain heat, making it an important component in insulation materials. Its properties also make it useful in the production of certain kinds of ceramics and adhesives. So the option B is correct.
To learn more about biotite mineral link is here
brainly.com/question/29104639
#SPJ4
Rectangle PQRS has vertices P(-3,3),Q(6,-3),andS(-3,-3). Graph the rectangle and its image after dilation with the scale factor 1/3
The image with a 1/3 scale dilation factor is P'Q'R'S' and its corresponding values are (-1.1), (2.1), (1.1), and (1.2).
How can a rectangle dilate?The scale factor of that dilatation is the name given to that figure. Also The distance between each point in the rectangle and its center will be scaled by that one dilation factor if the dilation is measured from the center of the rectangle.
The origin will serve as the center of the 1/3 scale-factor dilatation, and the coordinates will be (x, y) — (kx, ky), where k is the scale factor, or 1/3.
The formula for this is (1/3x, 1/3y).
About point P (- 3, 3)
P' = The image of P (-1. 1)
About point Q (6, -3)
The depiction of Q (1, 2)
About point R (-3, - 3)
Picture of R' (1, -1)
As a result, the image with a 1/3 scale factor dilation is P'Q'R'S' are (-1. 1),(1, 2),(1, -1) and accordingly.
To know more about dilation visit:-
https://brainly.com/question/25384459
#SPJ9
describe what contours on a topographic map represent and how to contour spacing indicates the steepness of a slope.
Contours on a topographic map represent the elevation of a landscape. Contour lines are drawn at regular intervals, and the spacing between each line indicates the steepness of the slope.
Closer-spaced contours indicate a steeper slope, while wider-spaced contours represent a more gradual slope. Contours can also be drawn in different patterns, such as concentric circles, double lines, or parallel lines. This allows for more detail in the elevation of the terrain.
Contours are a useful tool for visualizing the shape of a landscape and allowing for more accurate navigation. It is also a useful tool for determining potential hazards and areas of potential flooding. Contours on a map make it easier to identify natural features such as ravines, cliffs, valleys, and ridges.
Know more about Contours here
https://brainly.com/question/15942208#
#SPJ11
What are the 5 stages of solar system formation?
The 5 stages of solar system formation are Solar Nebula, Protostar and Protoplanetary Disk, Planetesimals, Protoplanets and Solar System.
The 5 stages of solar system formation are:
1. Solar Nebula: A cloud of dust and gas, called the solar nebula, begins to collapse due to gravitational forces. As it collapses, the material starts to spin and flatten into a disk shape.
2. Protostar and Protoplanetary Disk: The material in the center of the disk becomes denser, forming a protostar. Meanwhile, the remaining material in the disk starts to clump together, creating a protoplanetary disk around the protostar.
3. Planetesimals: Within the protoplanetary disk, solid particles collide and stick together, forming larger bodies called planetesimals. These planetesimals continue to grow as they collect more material from the disk.
4. Protoplanets: As planetesimals grow and interact, some merge through collisions, eventually forming larger bodies known as protoplanets. Protoplanets continue to evolve and differentiate, developing into the planets we observe in our solar system today.
5. Solar System: Over time, the protostar at the center of the system becomes a fully-fledged star (our Sun), while the remaining protoplanetary disk material is cleared out, leaving the planets, moons, asteroids, and other bodies orbiting the star. This marks the formation of the solar system.
For more about solar system:
https://brainly.com/question/12075871
#SPJ11
explain how water moves through the water cycle?
Water in the water cycle moves between the Earth's surface and the atmosphere in a continuous cycle. It begins as water evaporates from the surface of the ocean, rivers, lakes, and wetlands into the atmosphere. The water vapor in the atmosphere rises and is cooled, forming clouds. As the clouds move, they can release water vapor in the form of precipitation, such as rain, snow, and hail. This precipitation then falls back to the surface and collects in bodies of water, such as rivers, lakes, and oceans. The water can also seep into the ground, where it replenishes groundwater sources. As the water in the bodies of water warms, it can evaporate again, and the cycle continues.
as planet mercury formed, temperatures in this region were around 1400k. thus mercury formed out of...
As the planet Mercury formed, temperatures in this region were around 1400K.
Thus, Mercury formed out of material that had a high melting point. The most abundant elements were metals such as iron (Fe), nickel (Ni), and silicon (Si).
This is because the melting point of these elements is high enough to withstand the high temperature in the region. These elements, particularly iron, dominated the formation of Mercury.
In fact, the planet's density is the second-highest in the solar system, after Earth, which suggests a substantial metallic core.
According to the Giant impact hypothesis, Mercury was formed after a Mars-sized body collided with the early Earth.
The debris from the impact was scattered into space and coalesced into a hot planetesimal which eventually became Mercury.
To learn more about melting point, refer below:
https://brainly.com/question/29578567
#SPJ11
generally speaking, which seismic waves will have the greatest amplitude [height from top to bottom] on a seismogram?
P waves generally have the greatest amplitude on a seismogram. P waves are the fastest seismic waves, meaning they arrive at the detector first and have the highest amplitude when they reach the seismometer.
P waves are also the most energetic of the seismic waves. This is because they are generated by a sudden release of energy at the focus of an earthquake, and since they travel fastest, they retain more energy as they move through the earth.
This energy is then released at the surface and measured by the seismometer.
Know more about Seismic waves here :-
https://brainly.com/question/13056218#
#SPJ11
what does the existence of machu picchu suggest about the power of the inca king?
The existence of Machu Picchu suggests that the Inca king or emperor, Pachacuti Inca Yupanqui, had significant power and resources at his disposal. Machu Picchu is an ancient Inca citadel located in the Andes Mountains of Peru
It is thought to have been constructed in the middle of the 15th century as a royal estate for Pachacuti Inca Yupanqui. It is reasonable to assume that the Inca king had the strength and authority to command the necessary materials and labor force given the amount of labor, resources, and organization required to build such a monumental and elaborate structure in a remote and inaccessible location. Additionally, Machu Picchu's strategic location, with a view of the Urubamba River Valley, may have represented Inca power and control over the neighboring lands symbolically.
However, it's important to note that there are still many unanswered questions about the function and significance of Machu Picchu, and historians continue to disagree about its exact place in Inca politics and society.
To know more about machu picchu here
https://brainly.com/question/1659257
#SPJ4
he type of turbulence that develops when wind speed changes rapidly with height is: group of answer choices thermal turbulence adiabatic turbulence political turbulence shear-induced turbulence
The type of turbulence that develops when wind speed changes rapidly with height is known as shear-induced turbulence. Therefore the correct option E.
Turbulence is a disruptive event that can cause high-intensity fluctuation flows in different mediums. It is characterized by irregular, chaotic, and random fluctuations in velocity, pressure, and other fluid properties.
Turbulence is commonly observed in many natural and human-made systems, including oceans, rivers, the atmosphere, and industrial applications such as airplane engines and pipelines.
Shear-induced turbulence develops when there is a change in wind speed with height. This phenomenon occurs when the horizontal velocity gradient causes vertical shear and results in turbulent eddies. Therefore the correct option E.
For such more question on turbulence:
https://brainly.com/question/9242854
#SPJ11
The following question may be like this:
The type of turbulence that develops when wind speed changes rapidly with height is: a) thermal turbulence b) political turbulence c) adiabatic turbulence d) mechanical turbulence e) shearinduced turbulence
composed of minerals with crystals that have their long axes perpendicular to pressure
The type of rock that is composed of minerals with crystals that have their long axes perpendicular to pressure is called foliated metamorphic rock.
Foliated metamorphic rocks are formed when preexisting rocks (igneous, sedimentary, or metamorphic) are subjected to heat and pressure over a long period of time. The resulting rocks have a layered or banded appearance due to the alignment of mineral grains or crystals in a specific orientation.
The minerals in foliated metamorphic rocks are typically composed of crystals with their long axes perpendicular to pressure, which gives the rocks their characteristic texture. Examples of foliated metamorphic rocks include slate, phyllite, schist, and gneiss.
The question is:
The type of rock that is composed of minerals with crystals that have their long axes perpendicular to pressure is called _________.
For more about foliated metamorphic rock:
https://brainly.com/question/30776922
#SPJ11
what would you look for as evidence that a rock layer formed from materials deposited by ancient turbidity currents?
Answer:
repeated sequences of graded bedding that begin as coarse material and become finer upward
Explanation:
Evidence that a rock layer was formed from materials deposited by ancient turbidity currents include sedimentary structures such as ripple marks, graded bedding, and load casts. Ripple marks are wave-like undulations formed by currents. Graded bedding occurs when finer-grained material is deposited on top of coarser-grained material. Load casts are hollow molds that form when a current carries material and deposits it.
Other evidence of turbidity current deposits include erosional contact points, angular cross beds, and slump structures. Erosional contact points are found when a turbidity current is so powerful it cuts through underlying strata. Angular cross beds indicate rapid deposition by a fast-moving current.
Know more about rock layer here:
https://brainly.com/question/315862
#SPJ11
When water moves around a bend in the river it moves very fast on the __________ edge, picking up sediments.
Answer:
When water moves around a bend in the river it moves very fast on the outer edge, picking up sediments.
When water moves around a bend in the river it moves very fast on the outside edge, picking up sediments.
A meander bend, also known as a horse-bends, is a large bend in a river. Meandering rivers are divided into two categories: constant and sinuous. Meanders in constant meandering rivers are tighter and smoother than those in sinuous meandering rivers.
When water moves around a bend in the river it moves very fast on the outer edge, picking up sediments. The river's sediment transport is a crucial aspect of river dynamics. The amount of sediment transported by rivers is influenced by a variety of factors. The energy and speed of the water is the most essential aspect. The amount of sediment the water is carrying is also important. Suspended sediment is frequently transported in the river flow. Sediment is swept downstream and can accumulate where the water slows down or is obstructed in areas where the flow is disrupted. Such regions are often good areas for deposition.
Learn more about meander at https://brainly.com/question/86053
#SPJ11
what is foliation? group of answer choices parallel bedding in a rock formed by successive depositional events parallel orientation of platy minerals caused by complete melting parallel orientation of platy minerals caused by metamorphism parallel cracking or jointing of a rock due to stress
Foliation, a result of metamorphism, is the parallel orientation of platy minerals in a rock.
The parallel orientation of flat or platy minerals within a rock is referred to as foliation. The minerals align themselves perpendicular to the direction of the highest stress because to the severe pressure and/or heat that occurs during metamorphism. As a result, the rock develops a characteristic layering or banding pattern. Foliation is distinct from parallel bedding, which is created by several depositional occurrences, and from cracking or jointing, which is brought on by stress but excludes mineral alignment. Metamorphic rocks, such as schist and gneiss, frequently exhibit foliation, which can provide important details about the rock's geological past.
learn more about minerals here:
https://brainly.com/question/18078524
#SPJ4
one part of the coterminous u.s. which appears least likely to be impacted by enso is the states. a. northeastern b. southwestern c. northwestern
One part of the contiguous U.S. which appears least likely to be impacted by ENSO is the northwestern states.
What is ENSO?
ENSO (El Niño-Southern Oscillation) is an irregularly recurring climate pattern, typically occurring every two to seven years, which is the combination of the El Niño and La Niña phases in a way that affects the atmosphere and ocean.
Effects of ENSO:
The El Niño and La Niña phases of ENSO can have a significant impact on climate in various regions across the globe, including the contiguous United States. It can lead to changes in temperature, rainfall, and weather patterns.
How does ENSO affect the northwestern states?
The northwestern states of the contiguous U.S. which include Montana, Idaho, Washington, Oregon, and Wyoming, appear to be the least impacted by ENSO.
They tend to have less variability in temperature and precipitation as compared to the rest of the country. However, there can still be some effects of ENSO on these regions, such as a slightly increased likelihood of drier and warmer conditions during El Niño years.
To know more about ENSO, refer here:
https://brainly.com/question/6560924
#SPJ11
At what time of day is a shadow the shortest?
During solar noon, when the sun is at its highest position in the sky, the shadow is at its shortest.
This occurs usually about noon, however, it may differ somewhat depending on where you are and the season. The sun's rays are entering the scene at a more direct angle, which shortens the shadow's length.
Longer shadows are produced by variations in the sun's beams' angle when the sun rises or sets. The height of the object will also affect how long the shadow is, with taller objects casting longer shadows than shorter ones. The length of the shadow is the smallest overall when the sun is directly overhead.
Learn more about the solar noon at
https://brainly.com/question/31043299
#SPJ4