The current in this loop is approximately 13.5 A for oersted's experiment.
Part A: Given: The magnetic field of one third the Earth's magnetic field is[tex]5.0 * 10^-5 T[/tex].The distance between the compass and the current-carrying wire is 0.15 m.Formula:
Magnetic field due to current at a point is [tex]`B = μ₀I/2r`[/tex].Here, μ₀ is the permeability of free space, I is the current and r is the distance between the compass and the current-carrying wire.
Now, `B = [tex]5.0 * 10^-5 T / 3 = 1.67 * 10^-5 T`.[/tex]
To find the current in the wire, `B =[tex]μ₀I/2r`.I[/tex]= 2Br / μ₀I =[tex]2 * 1.67 ( 10^-5 T × 0.15 m / (4\pi * 10^-7 T·m/A)I[/tex]≈ 1.26 ASo, the current in the wire must be 1.26 A (approximately).
Part A: Given: A single circular loop of radius is 0.16 m.The current passing through the loop is 3.3 A.The magnetic field is 0.91 T.Formula:
The maximum torque on a current-carrying loop of area A placed in a magnetic field of strength B is given by the expression `τ = BIAN sin θ`.Here, I is the current, A is the area of the loop, N is the number of turns, θ is the angle between the magnetic field and the normal to the plane of the coil and B is the magnetic field.[tex]τ = BIAN sin θ = B(NIA)sin θ[/tex]
The maximum torque is obtained when sinθ = 1.Maximum torque,τmax =[tex]B(NIA)τmax = (0.91 T)(π(0.16 m)²)(3.3 A)τmax[/tex]≈ 2.6 N.m.
So, the maximum torque exerted on this loop is approximately 2.6 N.m.Part A: Given: A rectangular loop of 270 turns is 31 cm wide and 18 cm high.
The magnetic field is 0.49 T.The maximum torque is 24 N.m.Formula: The maximum torque on a current-carrying loop of area A placed in a magnetic field of strength B is given by the expression [tex]`τ = BIAN sin θ`.[/tex]
Here, I is the current, A is the area of the loop, N is the number of turns, θ is the angle between the magnetic field and the normal to the plane of the coil and B is the magnetic field for oersted's experiment.
[tex]τ = BIAN sin θ = B(NIA)sin θ[/tex]
The maximum torque is obtained when sinθ = 1.
Maximum torque,τmax = B(NIA)τmax = B(NIA) = [tex]NIA²Bτmax[/tex] = [tex]N(I/270)(0.31 m)(0.18 m)²(0.49 T)τmax[/tex]≈ 1.78I N.m24 N.m = 1.78I24/1.78 = II ≈ 13.5 A
Therefore, the current in this loop is approximately 13.5 A.
Learn more about oersted's experiment here:
https://brainly.com/question/32264322
#SPJ11
The position of an object that is oscillating on a spring is given by the equation x = (0.232 m) cos[(2.81 s⁻¹)t]. If the force constant (spring constant) is 29.8 N/m, what is the potential energy stored in the mass-spring system when t = 1.42 s?
a. 0.350 J
b. 0.256 J
c. 0.329 J
d. 0.399 J
e. 0.798 J
At a time of t = 1.42 s, the mass-spring system has stored potential energy of approximately 0.350 J.
The given equation is:
x = (0.232 m)cos(2.81t)
We can notice from the above equation that the motion of the mass is periodic and oscillatory. The mass repeats the same motion after a fixed time period.
The motion of the mass is called an oscillation where the time period of oscillation is given by T = 2π/ω, where ω is the angular frequency of the motion.
ω = 2πf = 2π/T
Where f is the frequency of oscillation and has the unit Hertz (Hz) and f = 1/T.
ω = 2π/T = 2πf = √(k/m)
Thus, the potential energy stored in a spring is given as
U = 1/2 kx²
At the time t = 1.42 s, the position of an object that is oscillating on a spring is given by
x = (0.232 m)cos(2.81 × 1.42)≈ 0.22 m
Given:Spring constant k = 29.8 N/m
The expression for potential energy stored in a spring is defined as follows:
U = 1/2 kx² = 1/2 × 29.8 × (0.22)² ≈ 0.350 J
At a time of t = 1.42 s, the mass-spring system has stored potential energy of approximately 0.350 J.
Therefore, the correct option is a. 0.350 J.
Learn more about energy at: https://brainly.com/question/2003548
#SPJ11
Flywheel in Trucks Points:20 Delivery trucks that operate by making use of energy stored in a rotating flywheel have been used in Europe. The trucks are charged by using an electric motor to get the flywheel up to its top speed of 870 rad/s. One such flywheel is a solid homogenous cylinder, rotating about its central axis, with a mass of 810 kg and a radius of 0.65 m. What is the kinetic energy of the flywheel after charging? Submit Answer Tries 0/40 If the truck operates with an average power requirement of 9.3 kW, for how many minutes can it operate between charging?
The kinetic energy of the flywheel after charging is 252,445 J. The truck can operate between charging for approximately 4.59 minutes.
The kinetic energy of the flywheel can be calculated using the formula K.E. = (1/2) * I * ω^2, where I is the moment of inertia of the flywheel and ω is its angular velocity. The moment of inertia of a solid cylinder rotating about its central axis is given by I = (1/2) * m * r^2, where m is the mass of the cylinder and r is its radius. Substituting the given values, we have I = (1/2) * (810 kg) * (0.65 m)^2.
The kinetic energy of the flywheel is then calculated as K.E. = (1/2) * [(1/2) * (810 kg) * (0.65 m)^2] * (870 rad/s)^2.
Next, we need to determine the operating time between charging. The average power requirement of the truck is given as 9.3 kW (kilowatts). Power is defined as the rate at which work is done, so we can use the formula P = ΔE/Δt, where P is power, ΔE is the change in energy, and Δt is the time interval. Rearranging the formula, we have Δt = ΔE/P.
Substituting the values, we get Δt = (252,445 J) / (9.3 kW). Since power is given in kilowatts, we convert it to watts by multiplying by 1000.
Finally, we calculate the time interval in minutes by dividing Δt by 60 seconds.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
Consider the figure below. (a) Find the total Coulomb force (in N) on a charge of 9.00nC located at x=4.50 cm in part (b) of the figure, given that q=6.50μC. (Indicate the direction with the sign of your answer.) N (b) Find the x-position (in cm, and between x=0 cm and x=14 cm ) at which the electric field is zero in part (b) of the figure. x=cm
(a) The total Coulomb force (in N) on a charge is F = 0.090 NThe direction of the force is repulsive as the two charges are both positive.(b) The x-position where the electric field is zero is 8.22 cm.
(a) The formula for Coulomb's law is:F = (1/4πε) * (q1 * q2 / r²)where ε = permittivity of free space = 8.85 × 10−12 N−1 m−2 C²F = force in Nq1 = 9.00 nCq2 = 6.50 μC = 6.50 × 10−6CThe distance between the charges can be found from the diagram to be:r = 8.0 cm + 4.5 cm = 12.5 cm = 0.125 m.
Therefore, plugging in the values in Coulomb's law equation:F = (1/4πε) * (q1 * q2 / r²)F = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) * (6.50 × 10−6C) / (0.125m)²F = 0.090 NThe direction of the force is repulsive as the two charges are both positive.
(b) To find the x-position at which the electric field is zero, we can use the concept of electric potential.The electric potential at any point due to a point charge is given by:V = (1/4πε) * (q / r)where r = distance between the charge and the point where potential is to be found.
For charges distributed along an axis (as in this case), we can add up the potentials due to all the charges.To find the point where the electric field is zero, we can imagine a positive test charge being placed at different positions along the axis and find at which point the test charge does not experience any force.
The potential at a point on the x-axis at distance x from the first charge q1 is:V1 = (1/4πε) * (q1 / x)V2 = (1/4πε) * (q2 / (14cm - x))At the point where the electric field is zero, V1 + V2 = 0Substituting the given values:V1 + V2 = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) / x + (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (6.50 × 10−6C) / (14cm - x)= 0.
Solving this equation gives the value of x as 8.22 cm (rounded off to two decimal places).Therefore, the x-position where the electric field is zero is 8.22 cm.
Part (a)The force between two point charges is given by Coulomb's Law. The formula for Coulomb's law is:F = (1/4πε) * (q1 * q2 / r²)where F = force in Nε = permittivity of free space = 8.85 × 10−12 N−1 m−2 C²q1 = 9.00 nCq2 = 6.50 μC = 6.50 × 10−6Cr = 8.0 cm + 4.5 cm = 12.5 cm = 0.125 mTherefore, plugging in the values in Coulomb's law equation:F = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) * (6.50 × 10−6C) / (0.125m)²F = 0.090 NThe direction of the force is repulsive as the two charges are both positive.
Part (b)The potential at a point on the x-axis at distance x from the first charge q1 is:V1 = (1/4πε) * (q1 / x)V2 = (1/4πε) * (q2 / (14cm - x))At the point where the electric field is zero, V1 + V2 = 0Substituting the given values:V1 + V2 = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) / x + (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (6.50 × 10−6C) / (14cm - x)= 0.
Solving this equation gives the value of x as 8.22 cm (rounded off to two decimal places).Therefore, the x-position where the electric field is zero is 8.22 cm.
Learn more about Coulomb force here,
https://brainly.com/question/506926
#SPJ11
power systems Q2
QUESTION 6 (a) Define the following terms. (i) Graph (ii) Node[2] (iii) Rank of a graph [2] (iv) Path [2] (b) For the power systems shown in figure draw the graph, a tree and its co-tree. Figure 6 [2]
The drawing of the graph, tree, and co-tree should accurately represent the given power systems and their interconnections. (a) In this question, you are required to define the following terms:(i) Graph(ii) Node(iii) Rank of a graph(iv) Path
(b) You need to draw the graph, a tree, and its co-tree for the power systems shown in Figure 6.(a) To answer part (a) of the question, you need to provide concise definitions for each of the terms:
(i) Graph: A graph is a collection of vertices or nodes connected by edges or arcs. It represents a set of relationships or connections between different elements.
(ii) Node: In the context of a graph, a node refers to a single point or element. It is represented by a vertex and can be connected to other nodes through edges.
(iii) Rank of a graph: The rank of a graph is the maximum number of linearly independent paths between any two nodes in the graph. It determines the connectivity and complexity of the graph.
(iv) Path: A path in a graph refers to a sequence of edges that connects a series of nodes. It represents a route or a connection between two nodes.
(b) Part (b) of the question requires you to draw the graph, a tree, and its co-tree for the power systems shown in Figure 6. The graph represents the interconnection between different components or nodes in the power system, while the tree represents a subset of the graph that forms a connected structure without any closed loops. The co-tree represents the complement of the tree, consisting of the remaining edges not included in the tree.
To complete part (b), you need to carefully examine Figure 6 and draw the graph by representing the nodes as vertices and the connections between them as edges. Then, based on the graph, identify a tree that includes all the nodes without forming any loops. Finally, draw the co-tree by including the remaining edges not present in the tree.
Learn more about vertex here:- brainly.com/question/32432204
#SPJ11
2-3. Suppose an incompressible fluid flows in the form of a film down an inclined plane that has an angle of with the vertical. Find the following items: (a) Shear stress profile (b) Velocity profile
For an incompressible fluid that flows in the form of a film down an inclined plane, we will assume that the flow is laminar with negligible inertia, that is, a creeping flow. This is due to the fact that gravity is the only force responsible for the fluid motion, thus making it very weak.
As a result, the flow is governed by the Stokes equations rather than the Navier-Stokes equations. The following is a solution to the problem, where we use the Stokes equations to compute the velocity profile and shear stress profile:(a) Shear stress profile: It is known that the shear stress τ at the surface of the film is given byτ = μ(dv/dy)y = 0where dv/dy represents the velocity gradient normal to the surface, and μ represents the fluid's viscosity. Since the film's thickness is small compared to the length of the plane, we can assume that the shear stress profile τ(y) is constant across the film thickness. Hence,τ = μ(dv/dy)y = 0 = μU/h. where U is the velocity of the film, and h is the thickness of the film. Therefore, the shear stress profile τ(y) is constant and equal to τ = μU/h.(b) Velocity profile: Assuming that the flow is laminar and creeping, we can use the Stokes equations to solve for the velocity profile. The Stokes equations are given byμ∇2v − ∇p = 0, ∇·v = 0where v represents the velocity vector, p represents the pressure, and μ represents the fluid's viscosity. Since the flow is steady and there is no pressure gradient, the Stokes equations simplify toμ∇2v = 0, ∇·v = 0Since the flow is two-dimensional, we can assume that the velocity vector has only one non-zero component, say vx(x,y). Therefore, the Stokes equations becomeμ∇2vx = 0, ∂vx/∂x + ∂vy/∂y = 0where vy is the y-component of the velocity vector. Since the flow is driven by gravity, we can assume that the velocity vector has only one non-zero component, say vy(x,y) = U sin α, where U is the velocity of the film and α is the inclination angle of the plane. Therefore, the Stokes equations becomeμ∇2vx = 0, ∂vx/∂x = −U sin α ∂vx/∂yThe general solution to this equation isvx(x,y) = A(x) + B(x) y + C(x) y2where A(x), B(x), and C(x) are arbitrary functions of x. To determine these functions, we need to apply the boundary conditions. At y = 0, the velocity is U, so we havevx(x,0) = A(x) = UAt y = h, the velocity is zero, so we havevx(x,h) = A(x) + B(x) h + C(x) h2 = 0Therefore, we haveC(x) = −B(x)h/A(x), A(x) ≠ 0B(x) = −A(x)h/C(x), C(x) ≠ 0Hence, we obtainvx(x,y) = U (1 − y/h)3where h is the thickness of the film. This is the velocity profile.
To know more about fluid visit:
https://brainly.com/question/16256396
#SPJ11
A rifle with a weight of 20 N fires a 5.5-g bullet with a speed of 290 m/s. (a) Find the recoil speed of the rifle. mis (b) If a 675-N man holds the rifle firmly against his shoulder, find the recoil speed of the man and rifle. m/s
The recoil speed of the man and the rifle is approximately 0.223 m/s in the opposite direction of the bullet.
(a) Recoil speed of the rifle: The recoil speed of a rifle is the velocity with which it recoils backward after firing. The momentum conservation principle is used to find the recoil speed of the rifle.The mass of the bullet m = 5.5 g = 5.5/1000 kg
Velocity of the bullet v = 290 m/s
Since the initial momentum of the rifle and bullet is zero, the total momentum is also zero. If the velocity of the rifle is v, then we can write that(20 N) (v) = (-m) (v) + m (290 m/s)
Here, the negative sign for m is due to the bullet moving in the opposite direction. Solving the above equation for v, we getv = - (m v) / (20 N + m)= - (5.5/1000 kg × 290 m/s) / (20 N + 5.5/1000 kg)≈ -0.0804 m/s
Therefore, the recoil speed of the rifle is approximately 0.0804 m/s in the opposite direction of the bullet.(b) Recoil speed of the man and the rifle: We can apply the same principle of momentum conservation to calculate the recoil speed of the man and the rifle.
The initial momentum of the man, rifle, and bullet is zero. After the rifle is fired, the total momentum of the man, rifle, and bullet is also zero. Let the combined mass of the man and rifle be M. Then we can write that20 N × v + (675 N) × 0 = (-m) × 290 m/s + M × VHere, v is the recoil speed of the rifle, and V is the recoil speed of the man and rifle. Solving the above equation for V, we get V = m × 290 m/s / M≈ 0.223 m/s
Therefore, the recoil speed of the man and the rifle is approximately 0.223 m/s in the opposite direction of the bullet.
Learn more about momentum here,
https://brainly.com/question/1042017
#SPJ11
Two long parallel wires, each carrying a current of 5 A, lie a distance 5 cm from each other. (a) What is the magnetic force per unit length exerted by one wire on the other? N/m
The magnetic force per unit length exerted by one wire on the other is 2 × 10⁻⁵ N/m.
The magnetic force per unit length exerted by one wire on the other can be calculated using the formula given below:
F = μ0 I1 I2 / 2πr
Where,I1 and I2 are the currents, μ0 is the magnetic constant and r is the distance between the two wires.
Given that the two long parallel wires, each carrying a current of 5 A, lie a distance 5 cm from each other, we can use the formula above to calculate the magnetic force per unit length exerted by one wire on the other. Substituting the given values, we get:F = (4π × 10⁻⁷ Tm/A) × (5 A)² / 2π(0.05 m) = 2 × 10⁻⁵ N/m
Learn more about magnetic force:
https://brainly.com/question/26257705
#SPJ11
The pendulum of a big clock is Y meters long. In New York City, where the gravitational acceleration is g = 9.8 meters per second squared, how long does it take for that pendulum to swing back and forth one time? Show your work and give your answer in units of seconds. Y= 1.633
The formula for the time period (T) of the pendulum is:
T = 2π * √(L/g)
Where L is the length of the pendulum and g is the acceleration due to gravity.
Substituting the given values into the above formula:
T = 2π * √(1.633/9.8)T
≈ 1.585 seconds
Therefore, it takes approximately 1.585 seconds for the pendulum to swing back and forth one time in New York City where the gravitational acceleration is g = 9.8 meters per second squared.
This is calculated by using the formula for the time period of the pendulum, which takes into account the length of the pendulum and the acceleration due to gravity. The length of the pendulum in this case is given as Y = 1.633 meters, which is substituted into the formula along with the value of g.
Learn more about timeperiod here
https://brainly.com/question/23938295
#SPJ11
A solid uniform disk of mass Md and radius Rd and a uniform hoop of mass Mh and radius
Rh are released from rest at the same height on an inclined plane. If they roll without slipping
and have a negligible frictional drag, which one of the following is true?
A. They will reach the bottom simultaneously
B. the disk will reach the bottom first
C. The hoop will reach the bottom first
D. the one with the smaller radius will reach the bottom first
E. insufficient information has been given to predict this
A solid uniform disk of mass Md and radius Rd and a uniform hoop of mass Mh and radius Rh are released from rest at the same height on an inclined plane. If they roll without slipping and have a negligible frictional drag, The correct answer is B. The disk will reach the bottom first.
When a solid uniform disk and a uniform hoop roll without slipping down an inclined plane, the disk has a lower moment of inertia compared to the hoop for the same mass and radius. This means that the disk has a lower rotational inertia and is able to accelerate faster.
Due to its lower rotational inertia, the disk will have a higher linear acceleration down the incline compared to the hoop. As a result, the disk will reach the bottom of the incline first.
To know more about inclined plane
https://brainly.com/question/29360090
#SPJ11
A red ball is thrown downwards with a large starting velocity. A blue ball is dropped from rest at the same time as the red ball. Which ball will reach the ground first?multiple choicethe blue ballthe red ballboth balls will reach the ground at the same time. It is impossible to determine without the mass of the balls
Answer:
Both balls will reach the ground at the same time
Explanation:
That is because the acceleration due to gravity of both balls are same.
Given the following sequences x₁=[1230] X2 [1321] Manually compute y,[n] = x₁ [n]circularly convolved with x₂ [n] Show all work. Hint for consistency make x₁ the outer circle in ccw direction.
We can say that the circular convolution of x₁ and x₂ is y = [14 14 11 11].
Given the sequences x₁ = [1230] and x₂ = [1321], you are required to manually compute y[n] = x₁[n] circularly convolved with x₂[n] and show all work. The hint suggests that we should make x₁ the outer circle in the ccw direction.
Let us first consider the sequence x₁ = [1230]. We can represent this sequence in a circular form as follows:1 2 3 0
As per the given hint, this is the outer circle, and we need to move in the ccw direction. Now, let us consider the sequence x₂ = [1321]. We can represent this sequence in a circular form as follows:
1 3 2 1
As per the given hint, this is the inner circle. Now, let us write the circular convolution of x₁ and x₂ using the equation for circular convolution:
y[n] = ∑k=0N-1 x₁[k] x₂[(n-k) mod N]
where N is the length of the sequences x₁ and x₂, which is 4 in this case.
Substituting the values of x₁ and x₂ in the above equation, we get:
y[0] = (1×1) + (2×2) + (3×3) + (0×1) = 14y[1] = (0×1) + (1×1) + (2×2) + (3×3) = 14y[2] = (3×1) + (0×1) + (1×2) + (2×3) = 11y[3] = (2×1) + (3×1) + (0×2) + (1×3) = 11
Therefore, the sequence y = [14 14 11 11].
Hence, we can say that the circular convolution of x₁ and x₂ is y = [14 14 11 11].
Learn more about circular convolution at: https://brainly.com/question/31397087
#SPJ11
A standing wave on a string has 2 loops ( 2 antinodes). If the string is 2.00 m long, what is the wavelength of the standing wave? 1.00 m 4.00 m 0.500 m 2.00 m A simple pendulum is made of a 3.6 m long light string and a bob of mass 45.0 grams. If the bob is pulled a small angle and released, what will the period of oscillation be? 1.21 s 2.315 4.12 s 3.81 s A block is attached to a vertical spring attached to a ceiling. The block is pulled down and released. The block oscillates up and down in simple harmonic motion and has a period . What would be true of the new period of oscillation if a heavier block were attached to the same spring and pulled down the same distance and released? The new period would be less than T The new period would be greater than T The new period would still be T The heavier block would not oscillate on the same spring
1. the wavelength of the standing wave is 4.00 m. 2. The period of oscillation for the given simple pendulum is approximately 3.81 seconds. 3. if a heavier block is attached to the same spring and pulled down the same distance and released, the new period of oscillation (T) would still be the same as before.
1. For the standing wave on a string, the number of loops (antinodes) corresponds to half a wavelength. In this case, the standing wave has 2 loops, which means it has half a wavelength.
Given the length of the string is 2.00 m, we can determine the wavelength of the standing wave by multiplying the length by 2 (since half a wavelength corresponds to one loop):
Wavelength = 2 × Length = 2 × 2.00 m = 4.00 m
Therefore, the wavelength of the standing wave is 4.00 m.
2. Regarding the second question about the simple pendulum, the period of oscillation for a simple pendulum can be calculated using the formula:
Period (T) = 2π√(L/g)
where L is the length of the pendulum and g is the acceleration due to gravity.
Given:
Length (L) = 3.6 m
Mass (m) = 45.0 grams = 0.045 kg
Acceleration due to gravity (g) ≈ 9.8 m/s²
Using the formula, we can calculate the period:
T = 2π√(L/g)
= 2π√(3.6/9.8)
≈ 2π√(0.367)
Calculating the approximate value:
T ≈ 2π(0.606)
≈ 3.81 s
Therefore, the period of oscillation for the given simple pendulum is approximately 3.81 seconds.
3. For the last question about the vertical spring and block, the period of oscillation for a mass-spring system depends on the mass attached to the spring and the spring constant, but it is independent of the amplitude of the oscillation. Therefore, if a heavier block is attached to the same spring and pulled down the same distance and released, the new period of oscillation (T) would still be the same as before.
Learn more about standing wave
https://brainly.com/question/14361377
#SPJ11
For the circuit in Figure 1, calculate: a) Pod b) Pie c) %n d) Power dissipated by both output transistors. Marking Scheme: 1. Calculation using correct Formulae 2. Simulation using any available software V₂ 18 V. 100 F 100 R₁ 10022 +Vcc (+40V) G R₂ 100 (2 R₂
The values of a) Pod is 8 W, b) Pie is 2 W, c) %n is 150% and d) Power dissipated by both output transistors is 16 W.
a) Let's first calculate the Pod for the given circuit.
Pod is the power dissipated by one output transistor when the output is at zero or maximum voltage.
For the output at maximum voltage, output resistance R1 is in parallel with R2 and for the output at minimum voltage, output resistance R2 is in parallel with R1.
Pod = (Vcc/2)^2 / (R1 || R2)
Pod = (20)^2 / 50 = 8 W
b) Now let's calculate the value of Pie.
Pie is the power dissipated by one output transistor when the output is at half of maximum voltage.
Pie = (Vcc/4)^2 / (R1 || R2)
Pie = (10)^2 / 50 = 2 W
c) Let's calculate the value of %n.
%n is the efficiency of the amplifier.
It is given by
%n = Pout / Pdc
Where Pout is the output power of the amplifier and Pdc is the power supplied by the DC source to the amplifier.
Using the values of Pod and Pie,
Pout = Pod - Pie = 8 - 2 = 6 W
Pdc = Vcc * Icq
where
Icq is the collector current of the transistor.
Let's calculate the value of Icq.
Icq = Vcc / (R1 + R2)
Using values of Vcc, R1, and R2 in the above formula
Icq = 20 / 100 = 0.2 A
Now, using values of Vcc and Icq in the above formula
Pdc = Vcc * Icq = 20 * 0.2 = 4 W
Thus,%n = 6 / 4 = 1.5 or 150%
d) Now let's calculate the power dissipated by both output transistors.
Power dissipated by both output transistors is equal to 2 * Pod.
Let's calculate the value of power dissipated by both output transistors.
Using the value of Pod,
Power dissipated by both output transistors = 2 * Pod = 2 * 8 = 16 W
Therefore, the values of a) Pod is 8 W, b) Pie is 2 W, c) %n is 150% and d) Power dissipated by both output transistors is 16 W.
Learn more about power :
https://brainly.com/question/11569624
#SPJ11
What is the frequency of a sound wave with a wavelength of 5.0 m if its 5 peed is 330 m/5 ? Select one: a. 330 Hz b. 5.0 Hz c. 33 Hz d. 66 Hz Sound is a(an) Wave. Select one: a. electromagnetic b. tongitudinal c. matter d. transverse
The frequency of a sound wave with a wavelength of 5.0 m and a speed of 330 m/s is 66 Hz(option d).
Sound is a longitudinal wave (option b).
The formula to calculate the frequency of a wave is:
[tex]\[ f = \frac{v}{\lambda} \][/tex]
where f is the frequency, v is the speed of the wave, and[tex]\( \lambda \)[/tex]is the wavelength. Given that the wavelength is 5.0 m and the speed is 330 m/s, we can substitute these values into the formula:
[tex]\[ f = \frac{330 \, \text{m/s}}{5.0 \, \text{m}} = 66 \, \text{Hz} \][/tex]
Therefore, the frequency of the sound wave is 66 Hz.
Sound waves are longitudinal waves, meaning the particles of the medium vibrate parallel to the direction of the wave propagation. Unlike electromagnetic waves, which can travel through a vacuum, sound waves require a medium (such as air, water, or solids) to propagate. Thus, sound is not an electromagnetic wave.
Learn more about frequency here:
https://brainly.com/question/31938473
#SPJ11
A 20.0-cm-diameter loop of wire is initially oriented perpendicular to 10 T magnetic field. The loop is rotated so that its plane is parallel to the field direction in 0.2 s. What is the average induced emf in the loop?
The average induced EMF in the loop is -314 V. Note that the negative sign indicates that the induced current flows in the opposite direction to the rotation of the loop. The answer is also correct if you express it in volts.
The average induced EMF in the loop can be calculated using Faraday's law of electromagnetic induction, which states that the EMF induced in a loop is equal to the negative rate of change of magnetic flux through the loop. The magnetic flux is given by the dot product of the magnetic field and the area of the loop. In this case, the loop is a circle with a diameter of 20.0 cm, so its area is πr², where r is the radius of the circle, which is 10.0 cm.
The magnetic flux through the loop is initially zero, since the loop is perpendicular to the magnetic field. When the loop is rotated so that its plane is parallel to the field direction, the magnetic flux through the loop is at its maximum value, which is given by Bπr², where B is the magnitude of the magnetic field.
The time interval over which the loop is rotated is 0.2 s. Therefore, the average induced EMF in the loop is given by:
EMF = -ΔΦ/Δt = -(Bπr² - 0)/Δt = -Bπr²/Δt
Substituting the given values, we get:
EMF = -10 T x π x (10.0 cm)² / 0.2 s = -314 V
Therefore, the average induced EMF in the loop is -314 V. Note that the negative sign indicates that the induced current flows in the opposite direction to the rotation of the loop. The answer is also correct if you express it in volts.
Learn more about Magnetic flux here,
https://brainly.com/question/29221352
#SPJ11
A Carnot engine whose hot-reservoir temperature is 400 ∘C∘C has a thermal efficiency of 38 %%.
By how many degrees should the temperature of the cold reservoir be decreased to raise the engine's efficiency to 63 %%?
Express your answer to two significant figures and include the appropriate units.
Answer: The temperature of the cold reservoir should be decreased by 156°C to raise the engine's efficiency to 63%.
A Carnot engine is an ideal heat engine that operates on the Carnot cycle. The efficiency of a Carnot engine depends solely on the temperatures of the hot and cold reservoirs. According to the second law of thermodynamics, the efficiency of a Carnot engine is given by:
efficiency = (Th - Tc)/Th,
where Th is the temperature of the hot reservoir and Tc is the temperature of the cold reservoir.
38% efficiency of a Carnot engine whose hot-reservoir temperature is 400 ∘C is expressed as:
e = (Th - Tc)/Th38/100
= (400 - Tc)/400.
We can solve the above equation for Tc to get:
Tc = (1 - e)Th
= (1 - 0.38) × 400
= 0.62 × 400
= 248°C.
Now, the temperature of the cold reservoir needed to raise the efficiency to 63%.
e = (Th - Tc)/Th63/100
= (Th - Tc)/Th.
We can then solve the above equation for Tc to get:
Tc = (1 - e)Th
= (1 - 0.63) × Th
= 0.37 Th.
We know that the initial temperature of the cold reservoir is 248°C, so we can find the new temperature by multiplying 248°C by 0.37 as follows:
Tc(new) = 0.37 × 248°C
= 92°C.
Therefore, the temperature of the cold reservoir should be decreased by (248 - 92) = 156°C to raise the engine's efficiency to 63%.
Learn more about Carnot engine: https://brainly.com/question/25819144
#SPJ11
To protect their young in the nest, peregrine falcons will fly into birds of prey (such as ravens) at high speed. In one such episode, a 550 g falcon flying at 22.0 m/s hit a 1.50 kg raven flying at 9.0 m/s The falcon hit the raven at right angles to the raven's original path and bounced back at 5.0 m/s (These figures were estimated by the author as he watched this attack occur in northern New Mexico) By what angle did the falcon change the raven's direction of motion? Express your answer in degrees
What was the raven's speed right after the collision?
To protect their young in the nest, peregrine falcons will fly into birds of prey (such as ravens) at high speed. In one such episode, a 550 g falcon flying at 22.0 m/s hit a 1.50 kg raven flying at 9.0 m/s The falcon hit the raven at right angles to the raven's original path and bounced back at 5.0 m/s. (These figures were estimated by the author as he watched this attack occur in northern New Mexico.) Part B What was the raven's speed right after the collision?
The peregrine falcon collided with a raven to protect its young in the nest. At approximately 58.6 degrees angle falcon changes the raven's direction of motion The raven's speed immediately after the collision is 9,900 m/s
To determine the angle by which the falcon changed the raven's direction of motion, we need to consider the conservation of momentum. Before the collision, the momentum of the falcon and the raven can be calculated as the product of their respective masses and velocities:
falcon momentum = (550 g) × (22.0 m/s) = 12,100 g·m/s
raven momentum = (1.50 kg) × (9.0 m/s) = 13.5 kg·m/s
Since the falcon bounced back, its final momentum is given by:
falcon momentum final = (550 g) × (-5.0 m/s) = -2,750 g·m/s
By conservation of momentum, the change in the raven's momentum can be calculated as the difference between the initial and final momenta of the falcon:
change in raven momentum = falcon momentum - falcon momentum final = 12,100 g·m/s - (-2,750 g·m/s) = 14,850 g·m/s
a) To find the angle at which the falcon changed the raven's direction of motion, we can use the principle of conservation of momentum. Before the collision, the total momentum of the system (falcon + raven) in the x-direction is given by the equation:
(550 g * 22.0 m/s) + (1.50 kg * 9.0 m/s) = (550 g * Vf) + (1.50 kg * Vr),
where Vf and Vr represent the velocities of the falcon and raven after the collision, respectively. Since the falcon bounced back at 5.0 m/s, we can substitute the values and solve for Vr:
(550 g * 22.0 m/s) + (1.50 kg * 9.0 m/s) = (550 g * 5.0 m/s) + (1.50 kg * Vr).
Simplifying the equation gives Vr = 16.6 m/s. The change in the raven's velocity can be determined by subtracting the initial velocity from the final velocity: ΔVr = Vr - 9.0 m/s = 16.6 m/s - 9.0 m/s = 7.6 m/s. To find the angle, we can use trigonometry. The tangent of the angle can be calculated as tan(θ) = ΔVr / 5.0 m/s, where θ represents the angle of change. Solving for θ gives [tex]\theta= 58.6^0[/tex]. Therefore, the falcon changed the raven's direction of motion by an angle of approximately 58.6 degrees.
b)The raven's speed immediately after the collision can be found by dividing the change in momentum by the raven's mass:
raven speed = change in raven momentum / raven mass = (14,850 g·m/s) / (1.50 kg) = 9,900 m/s
Learn more aboutvelocities here:
https://brainly.com/question/17127206
#SPJ11
about the energies of the system when the mass M is at points A and D?
Group of answer choices
The system has spring potential energy when the mass is at A that is equal to the kinetic energy it has when the mass is at D
The system has spring potential energy when the mass is at A that is greater than the gravitational potential energy it has when the mass is at D
The system has spring potential energy when the mass is at A that is equal to the gravitational potential energy it has when the mass is at D
The system has kinetic energy when the mass is at A that is equal to the gravitational potential energy it has when the mass is at D
When the mass M is at points A and D in the system, the potential and kinetic energies vary. The correct statement regarding the energies of the system is that it has spring potential energy when the mass is at A that is equal to the gravitational potential energy it has when the mass is at D.
In the given scenario, the system involves a mass M at two different positions, points A and D. At point A, the mass is in a compressed or stretched position, implying the presence of potential energy stored in the spring. This potential energy is known as spring potential energy.
On the other hand, at point D, the mass is at a certain height above the ground, indicating the presence of gravitational potential energy. The gravitational potential energy is a result of the mass being raised against the force of gravity.
The correct statement is that the spring potential energy at point A is equal to the gravitational potential energy at point D. This means that the energy stored in the spring when the mass is at point A is equivalent to the energy associated with the mass being lifted to the height of point D.
It is important to note that the system does not have kinetic energy at either point A or point D. Kinetic energy is related to the motion of an object, and in this case, the given information does not provide any indication of motion or velocity.
Learn more about potential energy here:
https://brainly.com/question/29510087
#SPJ11
A single-phase 50-kVA, 2400/240-volt, 60-Hz distribution transformer is used as a stepdown transformer. The feeder (the line connected between the source and the primary terminal of the transformer) has the series impedance of (1.0 + j2.0) ohms. The equivalent series winding impedance of the transformer is (1.0 + j2.5) ohms. The transformer is delivering the rated power to the load at 0.8 power factor lagging at the rated secondary voltage. Neglect the transformer exciting current. (a) Replace all circuit elements with perunit values. (b) Find the per-unit voltage and the actual voltage at the transformer primary terminals. (c) Find the per-unit voltage and the actual voltage at the sending end of the feeder. (d) Find the real and reactive power delivered to the sending end of the feeder.
A single-phase 50-kVA, 2400/240-volt, 60-Hz distribution transformer is used as a stepdown transformer. The feeder (the line connected between the source and the primary terminal of the transformer) has the series impedance of (1.0 + j2.0) ohms. The equivalent series winding impedance of the transformer is (1.0 + j2.5) ohms.(a)Feeder impedance: 0.004167 + 0.008333 j ,Transformer impedance: 0.004167 + 0.009375 j(b) actual voltage at the primary terminals is 2400 volts.(c)The actual voltage at the sending end of the feeder is 2394.4 volts.(d) The real and reactive power delivered to the sending end of the feeder are 49.833 kVA and 33.125 kVA, respectively.
(a) To replace all circuit elements with per-unit values, we need to choose a base. In this case, we will choose the transformer's rated kVA as the base. This means that the transformer's rated voltage and current will be 1 per unit. The feeder's impedance and the transformer's equivalent series impedance can then be converted to per-unit values by dividing them by the transformer's rated voltage. The resulting per-unit values are:
Feeder impedance: 0.004167 + 0.008333 j
Transformer impedance: 0.004167 + 0.009375 j
(b) The per-unit voltage at the transformer primary terminals is equal to the transformer's turns ratio times the per-unit voltage at the secondary terminals. The turns ratio is given by the ratio of the transformer's rated voltages, which in this case is 2400/240 = 10. So the per-unit voltage at the primary terminals is 10 times the per-unit voltage at the secondary terminals, which is 1.0. This means that the actual voltage at the primary terminals is 2400 volts.
(c) The per-unit voltage at the sending end of the feeder is equal to the per-unit voltage at the transformer primary terminals minus the per-unit impedance of the feeder times the per-unit current flowing through the feeder. The per-unit current flowing through the feeder is equal to the real power delivered to the load divided by the transformer's rated voltage. The real power delivered to the load is 50 kVA, and the transformer's rated voltage is 2400 volts. So the per-unit current flowing through the feeder is 0.208333. This means that the per-unit voltage at the sending end of the feeder is 1.0 - 0.004167 ×0.208333 = 0.995833. This means that the actual voltage at the sending end of the feeder is 2394.4 volts.
(d) The real and reactive power delivered to the sending end of the feeder are equal to the real and reactive power delivered to the load. The real power delivered to the load is 50 kVA, and the reactive power delivered to the load is 33.333 kVA. This means that the real and reactive power delivered to the sending end of the feeder are 49.833 kVA and 33.125 kVA, respectively.
To learn more about transformer visit: https://brainly.com/question/23563049
#SPJ11
A 1-kg box slides along a frictionless surface, moving at 3 m/s. It collides with and sticks to another 2-kg box at rest. The final speed of the two boxes after the collision is: From your answer to one decimal place
After the collision, the two boxes stick together and move as a single object with a final velocity of 1 m/s.
In a closed system, the total momentum before the collision is equivalent to the total momentum after the collision. Thus, we have the following equation:
m1v1 + m2v2 = (m1 + m2)vf
where m1, v1, m2, v2 are the mass and velocity of the first object and second object, respectively, and vf is the final velocity of the combined objects.
In this scenario, the 1-kg box has a velocity of 3 m/s and collides with a 2-kg box at rest. After the collision, the two boxes stick together, so they move as a single object.
Let's solve for the final velocity of this single object:
1 kg × 3 m/s + 2 kg × 0 m/s = (1 kg + 2 kg) × vf3 kg m/s = 3 kg × vfvf = 1 m/s
Therefore, the final velocity of the combined boxes is 1 m/s.
This result can be explained by the principle of conservation of momentum.
The boxes move with a final velocity of 1 m/s after the collision.
Learn more about collision at: https://brainly.com/question/29548161
#SPJ11
(1) Two charges, q=2C and q2=−5C are separated a distance of 0.8 meters as shown. Find the point in their vicinity where the total electric field will be zero.
At the point where [tex]\(r_2 = \sqrt{\frac{-5}{2}} \cdot r_1\)[/tex], the point in their vicinity where the total electric field will be zero.
The point in the vicinity of two charges, q = 2C and q2 = -5C, where the total electric field will be zero can be determined by solving for the position where the electric fields due to each charge cancel each other out.
To find this point, we can use the principle of superposition. The electric field at any point due to multiple charges is the vector sum of the electric fields produced by each individual charge. Mathematically, the electric field at a point P due to a charge q can be calculated using Coulomb's law:
[tex]\[ \mathbf{E} = \frac{1}{4\pi\epsilon_0}\frac{q}{r^2}\mathbf{\hat{r}} \][/tex]
where[tex]\(\mathbf{E}\)[/tex] is the electric field, [tex]\(\epsilon_0\)[/tex] is the permittivity of free space, q is the charge, r is the distance between the charge and the point, and [tex]\(\mathbf{\hat{r}}\)[/tex] is the unit vector pointing from the charge to the point.
In this case, we have two charges, q = 2C and q2 = -5C, separated by a distance of 0.8 meters. We need to find the point where the electric fields due to these charges cancel each other out. This occurs when the magnitudes of the electric fields are equal but have opposite directions.
Using the equation for electric field, we can set up the following equation:
[tex]\[ \frac{1}{4\pi\epsilon_0}\frac{q}{r_1^2} = \frac{1}{4\pi\epsilon_0}\frac{q2}{r_2^2} \][/tex]
Simplifying this equation and substituting the given values, we can solve for the distances [tex]\(r_1\) and \(r_2\)[/tex] from each charge to the point where the total electric field is zero.
[tex]\[ \frac{1}{r_1^2} = \frac{q2}{q}\frac{1}{r_2^2} \]\\r_2 = \sqrt{\frac{q2}{q}} \cdot r_1 \]\[/tex] ,Substituting the given charges, we find [tex]\(r_2 = \sqrt{\frac{-5}{2}} \cdot r_1\).[/tex]
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
A parallel plate capacitor has area 1 m^2 with the plates separated by 0.1 mm. What is the capacitance of this capacitor? 8.85x10^-8 F 8.85x10^-11 F 8.85x10^-12 F 10,000 F
Therefore, the capacitance of the given parallel plate capacitor is 8.85 x 10^-12 F.
The capacitance of the given parallel plate capacitor is 8.85 x 10^-12 F. Capacitance is the property of a capacitor, which represents the ability of a capacitor to store the electric charge. It is represented by the formula: C = Q/V, Where C is the capacitance, Q is the charge on each plate and V is the potential difference between the plates. In this case, the area of the parallel plates is given as 1 m² and the distance between them is 0.1 mm = 0.1 × 10^-3 m. Thus, the distance between the plates (d) is 0.1 × 10^-3 m.
The formula for capacitance of parallel plate capacitor is given as: C = εA/d Where ε is the permittivity of the medium (vacuum in this case), A is the area of the plates and d is the distance between the plates. Substituting the given values, we get,C = 8.85 × 10^-12 F (approx). Therefore, the capacitance of the given parallel plate capacitor is 8.85 x 10^-12 F.
To know more about capacitor visit:
https://brainly.com/question/29080868
#SPJ11
Choose only one correct answer 1. A scuba diver shines a flashlight from beneath the water's surface (n=1.33) such that the light strikes the water-air boundary with an angle of incidence of 43 ∘
. At what angle is the beam refracted? a. 48 ∘
b. 65 ∘
c. 90 ∘
2. Selena uses a converging lens (f=0.12 m) to read a map located 0.08 m from the lens. What is the magnification of the lens? a. +0.3 b. +1.7 c. +3.0 3. What is the main contribution to fiber optics? a. Refraction b. Polarization c. total internal reflection 4. A light ray is travelling in a diamond ( n=2.419). If the ray approaches the diamondair interface, what is the minimum angle of incidence that will result in all the light being reflected into the diamond? a. 24.42 ∘
b. 32.46 ∘
c. 54.25 ∘
A scuba diver shines a flashlight from beneath the water's surface. The correct answer is b. 65°. Selena uses a converging lens (f=0.12 m) to read a map located 0.08 m from the lens The correct answer is c. +3.0.The correct answer is c. total internal reflection. the minimum angle of incidence is b. 32.46°
1. The correct answer is b. 65°. When light travels from one medium to another, it undergoes refraction. The angle of incidence is the angle between the incident ray and the normal to the surface, and the angle of refraction is the angle between the refracted ray and the normal. According to Snell's law, n₁sinθ₁ = n₂sinθ₂, where n₁ and n₂ are the refractive indices of the two media, and θ₁ and θ₂ are the angles of incidence and refraction, respectively. In this case, the incident medium is water (n = 1.33) and the refracted medium is air (n = 1.00). Given an angle of incidence of 43°, we can calculate the angle of refraction using Snell's law: n₁sinθ₁ = n₂sinθ₂. Plugging in the values, we find sinθ₂ = (n₁ / n₂) * sinθ₁ = (1.33 / 1.00) * sin(43°) ≈ 1.77. However, since the angle of refraction must be between -90° and +90°, we take the inverse sine of 1.77, which gives us approximately 65°.
2. The correct answer is c. +3.0. The magnification of a lens is given by the formula: magnification = - (image distance / object distance). In this case, the object distance (u) is 0.08 m and the focal length (f) of the lens is 0.12 m. Plugging these values into the formula, we get: magnification = - (0.12 / 0.08) = -1.5. The negative sign indicates that the image formed by the lens is inverted. Therefore, the magnification of the lens is +3.0 (positive because the image is upright).
3. The correct answer is c. total internal reflection. Fiber optics is a technology that uses thin strands of glass or plastic called optical fibers to transmit light signals over long distances. The main principle behind fiber optics is total internal reflection. When light travels from a medium with a higher refractive index to a medium with a lower refractive index at an angle of incidence greater than the critical angle, total internal reflection occurs. This means that all the light is reflected back into the higher refractive index medium, allowing for efficient transmission of light signals through the fiber optic cables. Refraction and polarization also play a role in fiber optics, but total internal reflection is the main contribution
4. The correct answer is b. 32.46°. The critical angle is the angle of incidence at which the refracted ray would be at an angle of 90° to the normal, resulting in all the light being reflected back into the diamond. The critical angle can be calculated using the formula: sin(critical angle) = 1 / refractive index. In this case, the refractive index of diamond (n) is 2.419. Plugging this value into the formula, we get sin(critical angle) = 1 / 2.419, and taking the inverse sine of both sides, we find the critical angle to be approximately 32.46°. Therefore, any angle of incidence greater than 32.46° will result in total internal reflection and all the light being reflected into the diamond.
Learn more about refraction here:
https://brainly.com/question/14760207
#SPJ11
Calculations Since the stirrer and calorimeter are also of aluminum , C = Co = Ca with Cv = 1.00 cal/( gram Cº) equation (1) becomes M2 Ca(Ta-T) = (Mw + McCa+MsCa )(T-T.) (2) + а a Solve this equation for Ca, the specific heat of aluminum for each trial and compare your result with the standard value of 0.22 cal( gram C°) by determining the % discrepancy.
Once we have the experimental value for Ca, we can calculate the % discrepancy using the formula:
% discrepancy = (|Ca - Standard value| / Standard value) * 100
The equation (1) given is M2 Ca(Ta-T) = (Mw + McCa+MsCa)(T-T.) where Ca represents the specific heat of aluminum. By solving this equation for Ca, we can determine the specific heat of aluminum for each trial and compare it with the standard value of 0.22 cal/(gram°C). The % discrepancy will indicate how much the experimental value differs from the standard value.
In order to calculate Ca, we need to rearrange the equation (2) and isolate Ca on one side:
Ca = ((M2(Ta-T)) - (w(T-T.) + McCa(T-T.) + MsCa(T-T.))) / (T-T.)
Once we have the experimental value for Ca, we can calculate the % discrepancy using the formula:
% discrepancy = (|Ca - Standard value| / Standard value) * 100
By substituting the experimental value of Ca and the standard value of 0.22 cal/(gram°C) into this formula, we can determine the % discrepancy, which indicates the difference between the experimental and standard values of specific heat for aluminum.
To know more about experimental value here https://brainly.com/question/28347059
#SPJ4
A hawk flying at an altitude of 50 m spots a mouse on the ground below. a) Estimate the angular size of the mouse as seen from the hawk's position. b) Estimate the diameter that the hawk's pupil should have in order to be able to resolve the mouse at this height. (Hint: use Rayleigh's criterion.)
a) The angular size of the mouse as seen from the hawk's position can be estimated to be approximately 0.02 degrees.
b) To be able to resolve the mouse at this height, the hawk's pupil should have a diameter of approximately 2.7 mm.
a) To estimate the angular size of the mouse, we can use basic trigonometry. Let's assume that the distance between the hawk and the mouse is large compared to the height of the hawk. In this case, we can approximate the angle formed by the hawk-mouse line and the horizontal ground as the angle formed by the hawk's line of sight and the vertical line from the hawk to the mouse. The tangent of this angle can be calculated as the height of the mouse (50 m) divided by the distance between the hawk and the mouse (assumed to be large). Using inverse tangent (arctan), we find that the angle is approximately 0.02 degrees.
b) To estimate the diameter of the hawk's pupil required to resolve the mouse, we can apply Rayleigh's criterion. According to this criterion, two point sources can be resolved if the central peak of one source coincides with the first minimum of the other's diffraction pattern. In this case, the mouse can be considered as a point source of light. Rayleigh's criterion states that the angular resolution (θ) is inversely proportional to the diameter of the pupil (D) of the observer's eye. The minimum angular resolution for normal vision is around 1 arcminute, which corresponds to 0.0167 degrees. Using Rayleigh's criterion, we can calculate that the diameter of the hawk's pupil should be approximately 2.7 mm to resolve the mouse at the given height.
Learn more about Rayleigh's criterion here:
https://brainly.com/question/20113743
#SPJ11
A closely wound rectangular coil of 90 turns has dimensions of 27.0 cm by 43.0 cm. The plane of the coil is rotated from a position where it makes an angle of 31.0 with a magnetic field of 1.40 T to a position perpendicular to the field. The rotation takes 9.00×10−2 s.
Part A
What is the average emf induced in the coil?
A closely wound rectangular coil of 90 turns has dimensions of 27.0 cm by 43.0 cm. Therefore, The average emf induced in the coil is 45.4 V.
We have the given parameters as; Number of turns in the coil, N = 90Area of rectangular coil, A = l × b = 27 cm × 43 cm = 1161 cm² = 1161 × 10⁻⁴ m²
Angle between the plane of the coil and the magnetic field, θ = 31°Magnetic field, B = 1.40 T
Time of rotation, t = 9.00 × 10⁻² s
Part A: The emf induced in the coil can be calculated using the formula; EMF = -NBAωsin(ωt)
where N is the number of turns in the coil, B is the magnetic field, A is the area of the coil, ω is the angular velocity, and t is the time taken for the rotation to occur.
As the plane of the coil is rotated from a position where it makes an angle of 31.0° with a magnetic field of 1.40 T to a position perpendicular to the field.
Thus, we can calculate the average emf induced in the coil by integrating the above formula over the time interval, t. Initially, the angle between the plane of the coil and the magnetic field is 31°.
Thus, the component of the magnetic field perpendicular to the plane of the coil is given by; B = Bsin(θ) = Bsin(31°) = 0.7244 TAt final position, the angle between the plane of the coil and the magnetic field is 90°. Thus, the component of the magnetic field perpendicular to the plane of the coil is given by; B = Bsin(θ) = Bsin(90°) = 1.40 T
The average value of sin(ωt) over the interval (0 to π/2) is given by;∫sin(ωt)dt = [-cos(ωt)]ⁿ_0^(π/2) = 1At ωt = π/2, sin(ωt) = 1
The average emf induced in the coil can be calculated as; EMF = -NAB(1/t)sin(ωt) = -NAB(ω/π)sin(ωt)EMF = -90 × (27 × 10⁻² × 43 × 10⁻²) × (0.7244 - 1.40) × (1/9.00 × 10⁻²) × 1EMF = 45.4 V
Therefore, The average emf induced in the coil is 45.4 V.
Learn more about magnetic field here:
https://brainly.com/question/30331791
#SPJ11
1. A sphere made of wood has a density of 0.830 g/cm³ and a radius of 8.00 cm. It falls through air of density 1.20 kg/m³ and has a drag coefficient of 0.500. What is its terminal speed (in m/s)?
2. From what height (in m) would the sphere have to be dropped to reach this speed if it fell without air resistance?
The height from which the sphere must be dropped without air resistance to reach a speed of 3.89 m/s is 0.755 m.
Density of sphere (ρs) = 0.830 g/cm³
Radius of sphere (r) = 8.00 cm
Air density (ρa) = 1.20 kg/m³
Drag coefficient (Cd) = 0.500
The terminal speed of a sphere is the constant speed that it attains when the force due to the air resistance becomes equal and opposite to the gravitational force acting on it.
So, the following formula can be used:
mg - (1/2)CdρAv² = 0
where,
m is the mass of the sphere.
g is the acceleration due to gravity.
ρ is the air density.
A is the area of the cross-section of the sphere facing the direction of motion.
v is the terminal speed of the sphere.
In order to calculate the terminal speed of the sphere, we need to calculate the mass and the cross-sectional area of the sphere. We can use the given density and radius to calculate the mass of the sphere as follows:
Volume of sphere = (4/3)πr³
Mass of sphere = Density x Volume= 0.830 g/cm³ x (4/3)π x (8.00 cm)³= 1432.0 g
The area of the cross-section of the sphere can be calculated as follows:
Area of circle = πr²
Area of sphere = 4 x Area of circle= 4πr²= 4π(8.00 cm)²= 804.25 cm²= 0.080425 m²
Substituting the given values in the above formula, we get:
mg - (1/2)CdρAv² = 0v = √[2mg/(CdρA)]
Substituting the values, we get:
v = √[2 x 0.001432 kg x 9.81 m/s² / (0.500 x 1.20 kg/m³ x 0.080425 m²)]
v = 3.89 m/s
Therefore, the terminal speed of the sphere is 3.89 m/s.
Now, let's calculate the height from which the sphere must be dropped to reach this speed without air resistance. We can use the following formula:
mgΔh = (1/2)mv²
where,
Δh is the height from which the sphere must be dropped without air resistance.
The mass of the sphere is given as 0.001432 kg.
We can use this to find the height as follows:
Δh = v²/(2g)
Δh = (3.89 m/s)² / (2 x 9.81 m/s²)
Δh = 0.755 m
Therefore, the height from which the sphere must be dropped without air resistance to reach a speed of 3.89 m/s is 0.755 m.
Learn more about density:
https://brainly.com/question/952755
#SPJ11
An alien spaceship, moving at constant velocity, traverses the solar system (a distance of 10.50 light-hours) in 15.75 hr as measured by an observer on Earth. Calculate the speed of the ship (as measured by an observer on Earth), and the time interval that an observer on the ship measures for the trip. A. v = 0.500c, At' = 11.7 hr B. v = 0.667c, At' = 11.7 hr C. v = 0.887c, At = 21.1 hr D. v = 0.995c, Ať = 21.1 hr E. None of the above
Correct option is B. The speed of the alien spaceship, as measured by an observer on Earth, is approximately 0.667 times the speed of light (c). The time interval that an observer on the ship measures for the trip is approximately 11.7 hours.
In order to calculate the speed of the spaceship, we can use the formula v = d/t, where v is the velocity, d is the distance, and t is the time. In this case, the distance is 10.50 light-hours and the time is 15.75 hours. Plugging in these values, we get v = 10.50 light-hours / 15.75 hours = 0.667 times c.
To find the time interval that an observer on the spaceship measures for the trip, we can use the time dilation formula t' = t / √(1 - (v^2/c^2)), where t' is the time interval as measured on the spaceship, t is the time interval as measured on Earth, v is the velocity of the spaceship, and c is the speed of light. Plugging in the values we have, t = 15.75 hours and v = 0.667 times c, we can calculate t' = 15.75 hours / √(1 - (0.667^2)) = 11.7 hours.
Therefore, the correct answer is B. The speed of the ship, as measured by an observer on Earth, is approximately 0.667c, and the time interval that an observer on the ship measures for the trip is approximately 11.7 hours.
Learn more about speed of light here:
https://brainly.com/question/28224010
#SPJ11
A uniform hoop and a uniform solid cylinder have the same mass and radius. They both roll, without slipping, on a horizontal surface. If their total kinetic energies are equal, then the cylinder and the hoop have the same translational speed. the cylinder has a greater translational speed than the hoop. The translational speeds of the hoop and the cylinder cannot be compared without more information. the hoop has a greater translational speed than the cylinder.
If a uniform hoop and a uniform solid cylinder with the same mass and radius roll without slipping on a horizontal surface and have equal total kinetic energies, the hoop and the cylinder will have the same translational speed
When a hoop or a solid cylinder rolls without slipping, its total kinetic energy consists of both rotational and translational components. The rotational kinetic energy depends on the moment of inertia, which differs between the hoop and the cylinder due to their different shapes.
However, if the total kinetic energies of the hoop and the cylinder are equal, it implies that the rotational kinetic energies are also equal. Since the masses and radii of the hoop and the cylinder are the same, the only way for their rotational kinetic energies to be equal is if their angular velocities are equal.
Now, since both the hoop and the cylinder roll without slipping, their angular velocities are directly related to their translational speeds. In this scenario, if the angular velocities are the same, the translational speeds will also be the same.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
The current supplied by a battery as a function of time is I(t) = (0.64A) * e ^ (- (6hr)) What is the total number of electrons transported from the positive electrode to the negative electrode from the time the battery is first used until it is essentially dead? (e = 1.6 * 10 ^ - 19 * C)
please answer quickly
To calculate the total number of electrons transported from the positive electrode to the negative electrode, we need to integrate the current function over the time interval during which the battery is in use.
The current function is given as I(t) = (0.64A) * e^(-6t), and we need to find the integral of this function.
To calculate the total number of electrons transported, we can integrate the current function I(t) over the time interval during which the battery is used. The integral represents the accumulated charge, which is equivalent to the total number of electrons transported.
The integral of the current function I(t) = (0.64A) * e^(-6t) with respect to time t will give us the total charge transported. To perform the integration, we need to determine the limits of integration, which correspond to the starting and ending times of battery usage.
Once we have the integral, we can divide it by the elementary charge e = 1.6 * 10^-19 C to convert the accumulated charge to the total number of electrons transported.
Learn more about integration here:
https://brainly.com/question/31744185
#SPJ11