In the above situation the net torque on wire 2 due to wire 1 is Zero.
Which way is the force acting on the wire?Fleming's left-hand rule identifies the force's direction on a current-carrying wire when it is placed in a magnetic field. It always runs counter to how the magnetic field and electric current are moving.
Directional torque: what is it?Torque is a vector quantity by definition. The direction is determined as part of the torque computation. The direction is parallel to both the force and the radius from the axis. It is customary to choose it along the rotational axis in the right-hand rule direction.
When rotating clockwise, is torque negative?a force that is applied that results in a positive counterclockwise torque A negative torque rotates an object in a clockwise direction.
To know more about torque visit:
https://brainly.com/question/20691242
#SPJ4
How many resistors must be connected in series to give an equivalent resistance to five resistors connected in parallel
The value of the resistor of five parallel-connected resistors is R/5 ohm. Hence, 5 resistors of resistance R/25 ohm connected in series to give an equivalent resistance to five resistors connected in parallel
What is a resistor?Modern resistors are often constructed from a carbon, metals, or metal-oxide layer. In these resistors, an insulating material is covered in a helix around a thin layer of conductive (but still resistant) material.
What a resistor does in a circuitA resistor is a component of an electronic device that regulates or limits the amount of electrical current that can flow through a circuit. Resistors can also supply a certain amount of power to an electronic appliance like a transistor. A light bulb illuminates when power is applied to the resistor tungsten. The end results of the energy are heat and light.
To know more about resistors visit:-
https://brainly.com/question/29315138
#SPJ4
Two spherical objects have masses of 1. 5 x 10^5 kg and 8. 5 x 10^2 kg.
Their centers are separated by a distance of 2500 m. Find the
gravitational attraction between them.
When two objects are separated by a distance then gravitational attraction between them is 1.36 × 10^-9 N.
Given,
m = 1.5 × 10^5 kg
M = 8.5 × 10^2 kg
r = 2500 m
F=GmM/r^2
Here G = 6.67 × 10^-11 N.m^2/kg^2 is the value of the gravitational constant
F = 1.36 × 10^-9 N
Every body in the universe attracts every other body with a gravitational force that decreases with distance as 1/r2. But actually he knew more about the gravitational force: from the fact that bodies of different masses near the earth’s surface accelerate downwards at the same rate, using F = ma (Second Law).
If two bodies of different masses have the same acceleration they must be feeling forces in the same ratio as their masses (so a body twice as massive feels twice the gravitational force), that is, the gravitational force of attraction a body feels must be proportional to its mass.
Newton’s first clue that gravitation between bodies fell as the inverse-square of the distance may have come from comparing a falling apple to the falling moon, but important support for his idea was provided by a detailed description of planetary orbits constructed half a century earlier by Johannes Kepler.
To know more about gravitation here
https://brainly.com/question/25570480
#SPJ4
Mess Me and You will have nonsense Explain how this riddle relates to mutation in DNA
Nonsense mutations are those point mutations in the DNA where stop codons will appear before the time they should appear.
What are nonsense mutations?At the time of transcribing from DNA to RNA, the template needs to have both start and stop codons for the transcription to occur correctly, but sometimes mutations can occur that do not allow the protein to be produced correctly. This mutation can be permanent which causes damage to the formation of proteins.Sometimes mutations can be beneficial, allowing evolution and helping organisms to be better formed for a new environment.
It is the type of mutation in which a termination codon occurs before the time it should be, instead of giving a codon with a certain amino acid. Which gives a much shorter protein than it should be, giving a non-functional protein.
To learn more about mutation visit: https://brainly.com/question/17130462
#SPJ1
i need help with this can give a heart or like if its right
The new electrostatic force between the charges, given that q₁ is reduced to 1/2q₁ and q₂ is tripped is 3/2Fₑ (Option C)
How do I determine the new electrostatic force?First, we shall determine the initial electrostatic force between the charges. Details below:
First Charge (q₁) = q₁second Charge (q₂) = q₂Electric constant (K) = KDistance apart (r) = rInitial electrostatic force (F) = Fₑ =?F = Kq₁q₂ / r²
Fₑ = Kq₁q₂ / r²
Finall, we shall determine the new electrostatic force. The is illustrated below:
First Charge (q₁) = 1/2q₁second Charge (q₂) = 3q₂Electric constant (K) = KDistance apart (r) = rNew electrostatic force (F) =?F = Kq₁q₂ / r²
F = (K × 1/2q₁ × 3q₂) / r²
F = 3/2Kq₁q₂ / r²
But,
Fₑ = Kq₁q₂ / r²
Thus
F = 3/2Fₑ
Thus, we can conclude that the new electrostatic force is 3/2Fₑ (Option C)
Learn more about force between charges:
https://brainly.com/question/28569085
#SPJ1
What is the equation for torque used for lever arm and F for force?
The required equation for torque used for lever arm r and F for force is given as τ = |r| |F| sinθ.
A simple way to calculate the magnitude of the torque is to first determine the lever arm and then multiply by the times of applied force.
The lever arm is described as the perpendicular distance from axis of rotation to the line of action of force.
The equation used to calculate torque is , τ = r × F = |r| |F| sinθ
where,
r is the magnitude of lever arm
F is the magnitude of force vector
θ is the angle between lever arm and force vectors
To know more about torque:
https://brainly.com/question/29271618
#SPJ4
The specific heat of water is 4.18 J/(g·°C). How much energy is necessary to raise 15 g of water by 20 °C? (Use the equation Q = mcpΔT )
Answer:
1254 J
Explanation:
Applying,
Q = mcpΔT................... Equation 1
Where Q = heat, m = mass of water, cp = specific heat capacity of water, ΔT = Change in temperature.
From the question,
Given: m = 15 g, cp = 4.18 J/(g.°C), ΔT = 20°C
Substitute these values into equation 1
Q = 15×4.18×20
Q = 1254 J
Hence the amount of energy required is 1254 J
How is the heat affecting the appearance of the road and the people?
Answer:
I dont know what you mena by road and the people
A student is connecting three resistors of various resistances together in a circuit. In one configuration, the resistors are connected in a series. In another configuration, the resistors are connected in parallel. Explain which configuration results in a higher total resistance.
Most circuits contain more than one resistor, which restricts the passage of charge inside the circuit. Resistance is a unit of measurement for this charge flow restriction.
What is Resistance?When a current, or flow of charge, must pass through a sequence of devices, resistors are used. For instance, if a person holding a screwdriver allows current to flow through them and into the Earth, then
Resistors are connected in series to a voltage source. Given that the current must flow sequentially through each resistor, it makes sense that the total resistance is equal to the sum of the individual resistances.
This fact would be helpful to someone trying to prevent an electrical shock since they could wear high-resistance rubber-soled shoes to lower the current.
Therefore, Most circuits contain more than one resistor, which restricts the passage of charge inside the circuit. Resistance is a unit of measurement for this charge flow restriction.
To learn more resistance, refer to the link:
https://brainly.com/question/29427458
#SPJ1
How does the digestive system help the muscular system?
A.
The digestive system absorbs the nutrients necessary for the functioning of the muscular system.
B.The digestive system delivers the blood used by the muscular system.
C.
The digestive system exchanges gases used by the muscular system.
D.The digestive system provides structural support to the muscular system.
Answer:
I would say the answer is A... but I'm not so sure ....
A mass on the end of a spring undergoes simple harmonic motion. At the instant when the mass is at its equilibrium position, what is its instantaneous velocity?
A.Instantaneous velocity cannot be determined without additional information
B.At equilibrium, its instantaneous velocity is less than its maximum but not zero.
C.At equilibrium, its instantaneous velocity is at maximum
D.At equilibrium, its instantaneous velocity is zero.
At the instant when a mass is at its equilibrium position when undergoing simple harmonic motion, its instantaneous velocity is its maximum.
Therefore the answer is C. At equilibrium, its instantaneous velocity is at maximum
The simple harmonic motion is periodic motion that oscillates around an equilibrium position. At the equilibrium position, the net force on the mass is zero. Therefore, the mass is not accelerating, so its instantaneous acceleration is zero.
The motion is periodic, meaning it repeats itself at regular intervals of time. In the case of a mass on the end of a spring, the spring exerts a force on the mass that acts to bring it back to its equilibrium position. When the mass is at the equilibrium position, the spring force is zero, and the mass is not accelerating. Therefore, the acceleration is maximum at it ends and decreases to zero at equilibrium position.
The instantaneous velocity is zero at the end as it changes direction of motion, though the acceleration is decreasing from end position to equilibrium, velocity is increasing. The instant after equilibrium position, the acceleration is in opposite direction decreasing the velocity till it is zero at the end position.
To know more on SHM
https://brainly.com/question/29183311
#SPJ4
Steve does 80 J of work to a rope threaded through a pulley and attached to a crate of anvils. The tension of the rope is 10 N and the crate rises 4 m while Steve pulls. What is the efficiency of the pulley? [Hint: how much work was done on the crate?]
a) (A) 0.07 or 7 %
b) (B) 0.2 or 20 %
c) (C) 0.5 or 50 %
d) (D) 1 or 100 %
Answer:
The Answer is (B)
Explanation:
What is a major problem with CFCs?
A-it is toxic to breathe.
B-It does not readily break down in the atmosphere.
C-It is a greenhouse gas.
D-It isn't a good refrigerant
Answer:
I think
C- It's a greenhouse gas
A steel ball ball rolls across a level track a distance of 1.3 meters in a time of .45 seconds what is the velocity of the ball
Answer:
Velocity of ball = 2.90 meter per second (Approx.)
Explanation:
Given:
Distance travel by ball = 1.3 meters
Time taken by ball = 0.45 seconds
Find:
Velocity of ball
Computation:
Velocity = Total displacement / Total time taken
Velocity of ball = Distance travel by ball /Time taken by ball
Velocity of ball = 1.3 / 0.45
Velocity of ball = 2.889
Velocity of ball = 2.90 meter per second (Approx.)
Which of the following best defines the term “climate”?
A: the weather patterns that are occurring right now
B: the specific weather patterns for a local region or city
C: the temperature readings for the past 30 years or more
D:he average conditions of the atmosphere for a large region for the past 30 years or more
The statement that best defines climate is as follows: the average conditions of the atmosphere for a large region for the past 30 years or more (option D).
What is climate?Climate is the long-term manifestations of weather and other atmospheric conditions in a given area or country.
Climate is now usually represented by the statistical summary of its weather conditions during a period long enough to ensure that representative values are obtained (generally 30 years).
A description of a climate includes information on, e.g. the average temperature in different seasons, rainfall, and sunshine.
Therefore, option D correctly describes climate.
Learn more about climate at: https://brainly.com/question/10440860
#SPJ1
A body of ma 3kg and volume 4x10-4m3 hung from a balance graduated in newton. What i the reading of the balance when the body i in air
W=mg=(3)(9.8)=29.4N is the balance measurement for an airborne body. Scales of this kind include spring balances and newtons meters. They are frequently used to gauge the amount of force applied to an object.
What guiding principle guides the Newton spring balance?The spring balance operates according to Hooke's law. According to Hooke's law, a material's strain will increase in direct proportion to its applied stress up to its elastic limit.
The spring balance measures what?A straightforward and affordable way of measuring mass is offered by spring balances. The mass is suspended from a spring, and the spring's bending caused by the mass's downward gravitational pull is gauged against a scale.
To know more about spring balances visit :-
https://brainly.com/question/1597448
#SPJ4
Three point charges are arranged at the corners of a square of side L as shown in (Figure 1) What is the potential at the fourth corner (point A)? Express your answer in terms of the variables Q, L, and the Coulomb’s constant k.
The potential at the fourth point will be [tex]\frac{k^3Q}{\sqrt{L}}[/tex]
Let q1= -2Q and q2 = 6Q. ( k.)
What does charge number three's value, q3, equal?
To remedy the issue, the charges' orientation is also necessary.
You might try using the formula (kQ/r) to get the potential at the fourth corner.
Electric potential is a scalor, therefore adding the values from the three sites is as simple as adding them all together.
The effort required to transfer a unit charge against an electric field from a reference point to a specified spot. Earth is typically chosen as the reference point, however, any location beyond the range of the electric field charge can be utilized. potential electricity.
for instance, q1=-Q, L from the 4th point
q2=3Q and the fourth point's root is L.
The solution to q3= Q L from the fourth point is just [tex]-\frac{kQ}{L} + \frac{k^3Q}{\sqrt{L}} +\frac{kQ}{L} = \frac{k^3Q}{\sqrt{L}}[/tex] (at the fourth point)
For more questions on Electric potential
https://brainly.com/question/14306881
#SPJ4
The missing diagram is attached below:
What is the index of refraction of a refractive medium which slows the light to 1.88 x 10^8 m/s. What the index of the second medium
If the index of refraction of a refractive medium slows the light to 1.88 x 10^8 m/s. The index of the second medium is: 1.60.
How to find the index of the second medium?Using this formula to find the index of the second medium
n = c/v
Where:
n = refractive index of the medium
c = velocity of light in vacuum
v = velocity of light in the medium.2
Let plug in the formula
n = (3 x 10^8 m/s)/ 1.88 x 10^8 m/s
n = 300,000,000/188,000,000
n = 1.595
n = 1.60 (Approximately)
Therefore we can conclude that the refractive index of the medium is 1.60.
Learn more about refractive index of the medium here:https://brainly.com/question/12768121
#SPJ1
A pulse can be described as a single wave disturbance that moves through a medium. Consider a pulse that is defined at time t=0. 00s by the equation y(x)=6. 00m3x2+2. 00m2 centered around x=0. 00m. The pulse moves with a velocity of v=3. 00m/s in the positive x-direction. (a) What is the amplitude of the pulse? (b) What is the equation of the pulse as a function of position and time? (c) Where is the pulse centered at time t=5. 00s?
The amplitude of the pulse is 3 m, the equation of the pulse as a function of position and time is y(x) = 6/{(x - 3t)² + 2} m and the pulse is 15 m centred at time t = 5. 00s.
y(x) = 6/(x² + 2)
v = 3 m/s
The amplitude(A) of the pulse:
When x= 0, Then y = A
Put x= 0
y(x) = 6/(x² + 2)
y(0) = 6/(0² + 2)
y = A = 3 m
Distance travel in time t
x = vt
x = 3 t
y(x) = 6/{(x - 3t)² + 2}
The distance covered by the pulse in the time 5 s
D = v t
D = 3 x 5
D = 15 m
To know more about amplitude, here
https://brainly.com/question/30185219
#SPJ4
How do you calculate lever arm in torque?
We can find the torque of lever arm by the formula Torque(T)=Force * perpendicular distance.
A torque is an action that causes objects to rotate. A torque is required to rotate an object, just as a force is required to move an object in a line. Torque is created by force, but it also depends on where the force is applied and the point about which the object rotates.
Force and lever arm are not always perpendicular. When the force and lever arm are not perpendicular, trigonometry is required to calculate the length of the lever arm. The force applied is perpendicular to the surface of the object rotating. When this force is at an angle θ with the plane of the object, the perpendicular force requires the use of the sine function.
When an object is in rotational equilibrium, the net torque applied to it is zero. For example, if an object such as a see-saw is not rotating, you know the torque on each side is balanced Rotational equilibrium is often used to determine unknown forces. Any object that is not moving is in rotational equilibrium and in translational equilibrium.
To know more about torque here
https://brainly.com/question/2456794
#SPJ4
ide over the
When she returned, the substance had changed phase, and the substance was in the liquid phase. What
Happened to the molecules of this substance?
a
b
d
Before the mechanic left, the molecules were moving away from each other. When she returned, they were
moving around each other.
Before the mechanic left, the molecules were moving around each other. When she returned, they were
moving in place.
Before the mechanic left, the molecules were moving around each other. When she returned, they were
moving away from each other.
Before the mechanic left, the molecules were moving in place. When she returned, they were moving around
each other.
croll for more
The correct answer is D) Before the mechanic left, the molecules were moving in place. When she returned, they were moving around each other. The change in phase from solid to liquid is due to a change in the motion of molecules.
What is molecules?Molecules are formed when two or more atoms come together and form a chemical bond. Molecules exist in all forms of matter and are the building blocks of all living organisms. Molecules can range in size from the very small, such as hydrogen, to the very large, such as proteins. Generally, molecules are composed of two or more atoms of the same element or different elements that are held together by chemical bonds. Molecules can also be composed of multiple subatomic particles, such as protons and neutrons, which form the nucleus of an atom. Molecules may also contain electrons, which are held in orbit around the nucleus by electrostatic forces. Molecules can have different shapes depending on the arrangement of their constituent atoms. Molecules are essential to all forms of life, as they are responsible for many of the physical and chemical processes that take place in living organisms.
To learn more about molecules
https://brainly.com/question/23080116
#SPJ1
Caffeine dosage causes a change in the time to finish a maze and it isn't possible for that the time to finish a maze could cause a change in
caffeine dosage.
Caffeine dosage and time to finish a maze are independent variables, meaning that a change in one does not cause a change in the other. It is possible that caffeine dosage may have an effect on the time it takes to finish a maze, but the time it takes to finish a maze would not cause a change in caffeine dosage.
Caffeine Maze Time ImpactCaffeine is a stimulant that can affect the central nervous system and can have a range of effects on the body, including increased alertness, focus, and energy. When it comes to completing a maze, the time it takes to finish it could be affected by the person's level of alertness, focus, and energy. Therefore, if a person ingests a certain dosage of caffeine, it could affect the time it takes for them to finish the maze because of the effect caffeine has on the body.
On the other hand, the time it takes to finish a maze does not affect the caffeine dosage, in other words, caffeine dosage is an independent variable, it does not depend on other variables, and does not change based on the time it takes to complete a maze. It is determined by the amount of caffeine consumed.
So, in short, caffeine dosage can have an effect on the time it takes to finish a maze, but the time it takes to finish a maze does not have an effect on caffeine dosage.
Learn more about Caffeine Dosage here:
https://brainly.com/question/8554538
#SPJ4
What can you conclude about the velocity of the object on the graph below
Answer:
The more time goes on the higher in meters. So most likely more time = closer to terminal velocity. -hope this helps.
Air conditioners not only cool air, but dry it as well. Suppose that a room in a home measures 5. 0m×9. 0m×2. 4m.
If the outdoor temperature is 30 ∘C and the vapor pressure of water in the air is 85 % of the vapor pressure of water at this temperature, what mass of water must be removed from the air each time the volume of air in the room is cycled through the air conditioner? The vapor pressure for water at 30 ∘C is 31. 8 torr
The volume of air in the room. The volume of the room is given by the product of its length, width, and height= 18.015 g/mol.
Calculation-Volume of air = 5.0 m × 9.0 m × 2.4 m = 108 m^3
Next, we need to find the number of moles of water vapor present in the air at 85% of the vapor pressure of water at 30°C.
The vapor pressure for water at 30°C is 31.8 torr. At 85% of this value, the vapor pressure of water in the air is:
Vapor pressure in air = 0.85 x 31.8 torr = 27.03 torr
We can use the Ideal Gas Law, PV = nRT, to find the number of moles of water vapor present in the air.
P = 27.03 torr
V = 108 m^3
R = 8.314 J/mol·K (The universal gas constant)
T = 303 K (Temperature in kelvins)
n = (PV) / (RT)
Find the mass of water that needs to be removed from the air each time the volume of air in the room is cycled through the air conditioner.mass of water = n * M(H2O)
Where M(H2O) is the molar mass of water which is 18.015 g/mol. It is important to note that this calculation assumes that air behaves as an ideal gas and that the temperature and pressure remain constant throughout the room. In reality, the temperature and pressure may vary throughout the room and the process of removing water vapor from the air can also affect the temperature and pressure.
to know more about vapor pressure here:
brainly.com/question/11864750
#SPJ4
a stone of mass 750 kg is thrown vertically upward with a velocity of 10m/s find the potential energy at the greatest height and kinetic energy on reaching the ground
Answer:
Potential Energy at the greatest point = 37.5 J
Explanation:
Given :
Mass is 750 g
In term of kg :
Mass is 0.75 kg .
Velocity ( v ) = 10 m / sec
We have formula for kinetic energy :
K.E. = 1 / 2 m v²
Putting values now :
K.E. = 1 / 2 × 0.75 × 10 × 10
K.E. = 1 / 2 × 75 J
K.E. = 37.5 J
Since K.E . = P.E.
Thus potential energy of stone is 37.5 J .
why should a counterweight be moveable
A weight known as a counterweight is one that stabilizes and balances a mechanical system by exerting an opposing force.
Why do moveable flight control surfaces have large counterweights installed in the leading edge?A counterweight's function is to speed up and improve the efficiency of lifting the load, which conserves energy and reduces wear and tear on the lifting apparatus. A weight known as a counterweight is one that stabilizes and balances a mechanical system by exerting an opposing force.
To lift loads up to 120 tons, tower cranes are utilized at large building sites. In a tower crane, a fixed and a moveable counterweight are held by two arms that extend from the center of the structure. For the purpose of balancing the load, the operator moves the mobile counterweight.
For the purpose of providing offset forces in the flight controls, counter weights are used. With less pressure needed to move the controls, this gives them better "feel" and "feedback" forces.
To learn more counterweight refer to:
https://brainly.com/question/29840021
#SPJ1
A counterweight should be moveable so as to make lifting the load in a faster and more efficient manner.
What is a counterweight?A counterweight is a weight which has a major purpose to help maintain the stability and balance of a mechanical system by exerting an opposing force. A counterbalance or counterweight is usually used to lift a load more quickly and effectively, which saves energy and reduces wear and tear on the lifting apparatus used with it.The potential energy obtained is equivalent to the work done to lift the counterweight.When the counterweight is being displaced by a force that is acting in the same direction as the applied force, the potential energy gained is equal to that distance it is working or kept.To know more about counterweight visit
https://brainly.com/question/17236917
#SPJ1
How can Accenture's sustainable software engineering help meet sustainability?
Accenture can assist its clients in being more sustainable thanks to the myNav. By making it easier to create cloud solutions that lower carbon emissions by rearranging manufacturing facilities such that carbon emissions can be calculated with ease.
by establishing new corporate efforts to lower transportation expenses and by establishing new rules for the disposal of out-of-date technology.
Accenture can assist its clients in becoming more sustainable by using mynav to locate, assess, architect, and simulate an end-to-end solution at scale.
reduces the expense of transportation
creates a design that is appropriate and aids the customer in becoming more sustainable.
establishes sustainable guidelines for disposing of outdated technology.
Green Cloud Advisor starts by establishing a baseline for the energy usage, compute needs, and sustainability objectives of current data centers. through promoting the development of cloud technologies that cut down on carbon emissions
by reconfiguring factories so that carbon emissions may be easily measured
by implementing creative business techniques to reduce the cost of transportation
by creating new regulations for removing outdated technologies.
To learn more about Accenture's sustainable software engineering from given link
https://brainly.com/question/26449898
#SPJ4
The half life of Sodium-24 is 15 hours. If we have 10 grams of Sodium-24, how much will remain after 15 hours?
Answer:
5 grams
Explanation:
15 hours = one half-life
a half-life is the time taken for the radioactive substance to reduce to half of its original value
thus in 15 hours, there will be 5 grams remaining
A bus is traveling at 40 m/s after 5 seconds it comes to a stop what is the acceleration of the bus
Answer:
The acceleration becomes zero as it stops. It no longer moves
An error that occurs consistently in one direction, such as a scale that weighs everyone two pounds more than their true weight, is known as a:
A systematic error is one that constantly occurs in one direction, for as when a scale consistently overestimates everyone's weight by two pounds.
If an error changes in the same direction throughout time, it is said to be systematic. For instance, if something always or frequently caused the blood pressure to increase right before the measurements were to be taken, this could occur when taking blood pressure.One measurement may slightly differ from the next due to random error. It results from unanticipated changes that occur throughout an experiment. When a reading is taken consistently each time, systematic error always impacts measurements in exactly the same way or to exactly the same degree. It is foreseeable.To know more about error here
https://brainly.com/question/28008941
#SPJ4
The seatback must be adjusted far enough for your __________ to rest on the top of the steering wheel when your arm is comfortably extended.
The seatback must be adjusted far enough for your wrist to rest on the top of the steering wheel when your arm is comfortably extended.
What is the motion of steering wheel?The majority of modern automobiles, compact trucks, and SUVs have a rack and pinion steering. This transforms the steering wheel's rotational action into the linear motion which rotates the wheels and directs your course. A steering pinion, a circular gear, is used in the system to lock teeth on a rod (the rack).
What kind of basic device is a steering wheel?The basic device at work in steering, doorknobs, turbines, and bicycle wheels is a wheel and axle. An inclined plane wound around a cylinder is known as a screw.
To know more about Steering wheel visit:
https://brainly.com/question/12543668
#SPJ4