Calculate the engineering stress in SI units on a bar 25 cm long and having a cross section of 9.00 mm × 4.00 mm that is subjected to a load of 3500 kg.
Answer:
7500kg/mm
Explanation:
A chemical rocket is used for launch into earth orbit. The combustion stagnation temperature is 3000K. The molecular weight of the combustion products is 26. The gases expand isentropically as an ideal gas mixture with specific-heat ratio of 1.2. The area ratio Ae/A* of the nozzle is 20, and the throat diameter is 0.1m. Determine:
a. The stagnation pressure if the expansion is correct at sea level
b. The rocket thrust at sea level, 15- km, 30km, and 60km altitude.
Two question here please answer it correctly
40. Evaluate f (x2-2xy)dx +(x2y+3)dy around the boundary of the region defined by y2 = 8x and x = 2
(a) directly, (b) by using Green's theorem. Ans. 128/5
(TT.2)
41. Evaluate f (6xy - y2) dx + (3x2 --- 2xy) dy along the cycloid x = 6 - sin 6, y = 1 - cos 6.
(40) It looks like the line integral is
[tex]\displaystyle \int_C (x^2-2xy)\,\mathrm dx + (x^2y+3)\,\mathrm dy[/tex]
where C is the boundary of the region D,
[tex]D = \left\{(x,y) \mid \dfrac{y^2}8\le x\le2\text{ and }-4\le y\le4\right\}[/tex]
(a) To evaluate the line integral directly, split up C into two paths C₁ and C₂, parameterized by
• C₁ : x = t ²/8 and y = -t, where -4 ≤ t ≤ 4
(the y component is negative to make this path have a positive/counterclockwise orientation)
• C₂ : x = 2 and y = t, where -4 ≤ t ≤ 4
Then the line integral over C is the sum of the line integrals over C₁ and C₂ :
[tex]\displaystyle \int_C = \int_C \left(\left(x(t)^2-2x(t)y(t)\right)\dfrac{\mathrm dx}{\mathrm dt} + \left(x(t)^2y(t)-3\right)\dfrac{\mathrm dy}{\mathrm dt}\right)\,\mathrm dt \\\\ = \int_{-4}^4 \left(\left(\frac{t^3}4+\frac{t^4}{64}\right)\frac t4 - \left(3-\frac{t^5}{64}\right)\right)\,\mathrm dt + \int_{-4}^4 (4t+3)\,\mathrm dt \\\\ = \int_{-4}^4 \left(4t+\dfrac{t^4}{16}+\dfrac{5t^5}{256}\right)\,\mathrm dt = \boxed{\frac{128}5}[/tex]
(b) Using Green's theorem, we have
[tex]\displaystyle \int_C (x^2-2xy)\,\mathrm dx + (x^2+3)\,\mathrm dy = \iint_D \frac{\partial(x^2y+3)}{\partial x} - \frac{\partial(x^2-2xy)}{\partial y}\,\mathrm dx\,\mathrm dy \\\\ = \int_{-4}^4 \int_{y^2/8}^2 (2xy+2x)\,\mathrm dx\,\mathrm dy = \boxed{\frac{128}5}[/tex]
# # #
(41) I assume you meant to use θ in the parameterization, and not 6, so that C is parameterized by x = θ - sin(θ) and y = 1 - cos(θ). There's no range given for θ, so I'll just assume 0 ≤ θ ≤ π.
Then ... (for some reason, the math text won't render properly. I've attached the computation as an image)
(where s = sin(θ) and c = cos(θ))
Which of the following is the best analogy for the relationship between an equipment operator and the signal person?
The signal person is like the eyes and the equipment operator is like the hands.
The signal person is like the heart and the equipment operator is like the brain.
The signal person is like the arms and the equipment operator is like the legs.
The signal person is like the head and the equipment operator is like the tail.
Answer:
The signal person is like the eyes and the equipment operator is like the hands.
Explanation:
A double-threaded Acme stub screw of known major diameter is used in ajack having a plain thrust collar of known mean diameter. Coefficients of running friction are estimated as 0.10 for the collar and 0.11 for the screw. Assume (1) the starting friction is about 1/3 higher than running friction and (2) the screw is not exposed to vibration.
Required:
a. Determine the pitch, lead, thread depth, mean pitch diameter, and helix angle of the screw.
b. Estimate the starting torque for raising and for lowering a 5000 lb load.
c. If the screw is lifting a 5000 lb load at the rate of 4 ft/min, what is the screw rpm? What is the efficiency of the jack under this steady-state condition?
d. Would the screw overhaul if a ball thrust bearing (of negligible friction) were used in place of the plain thrust collar.
Answer:
I'm pretty sure it's c but i may be wrong
Radio capacity may be increased in cellular concept by
Answer:
Answer is "Increasing the number of base stations & reusing the channels"
Explanation:
Answer:
radio capacity may be increased in cellular concept by increasing the number of base stations and reusing the channels.
Need help coding this i’m using python.
Answer:
ill help'
Explanation:
This material is considered flammable. A paint B glue C Oil D ALL of the above
Answer:
Explanation:
Generally speaking, flammable liquids will ignite (catch on fire) and burn easily at normal working temperatures. ... Fuels and many common products like solvents, thinners, cleaners, adhesives, paints, waxes and polishes may be flammable or combustible liquids.
The material which is considered flammable is: A. paint.
A chemical property can be defined as the property of a chemical compound (material) that can be observed and is measurable during a chemical reaction.
In Science, some examples of the chemical properties of a material (substance) include the following;
TarnishingRustingReactivityFlammabilityFlammability refers to the ability of a material to support combustion or burn continuously in the presence of air. An example of a material which is considered to be flammable is paint because it contains a high level of solvents.
Read more on flammability here: https://brainly.com/question/14214497
what is geometrical shape? list them and describe any two of them with sketch
Explanation:
Geometric Shapes can be defined as figure or area closed by a boundary which is created by combining the specific amount of curves, points, and lines.
Where does Astro Teller work? What do they do there?
Answer:
Astro Teller oversees X, Alphabet's moonshot factory for building magical, audacious ideas that can solve concrete problems for millions of people through science and technology. As X's head, Teller has an unmatched vantage point from which to watch possible futures unfold.
Explanation:
hope it helps !!
ss mark me as BRAINLIST
the event A,B,C satisfy p(A/B∩c)=1/4,P(B/C)=1/3 and P(C)=1/2 find P(A'∩B∩C)
A
Explanation:
i don't know the answer
Which of the following defines context?
the ability to find new ways of thinking about a problem
the condition in which a problem exists
the study of the theoretical nature of an event
the problem-solving technique of an engineer
Answer:
The condition in which a problem exists
Explanation:
Context is the situation surrounding information, e.g. if you don't understand a word in a passge you can look for "context clues" where you use surrounding words to infer the meaning of the unknown one
A pin B and D are each of 8mm diameter and act as single shape pin C is 6mm diameter and act as double shape for the laoding shaw determine averege shear stress in each
Answer:
what's the question?...........
the impact of engineering to socio economic development of the country
18) Technician A says that adjustable wrenches should be used when
torquing fasteners. Technician B says that adjustable wrenches can round
the edges of fasteners. Which technician is correct?
A) Technician A only
B) Technician B only
O C) Both technicians
D) Neither technician
What is the core domain for Accenture’s Multi-party Systems practice?
A. digital identity
B. employee retention
C. social networking
D. marketing responsiveness
Answer:
a
Explanation:
digital identity is the answer
The core domain for Accenture’s multi-party System is that of a digital identity. Ths that option A is correct.
What is a Multi-party System?A multiparty system is a shared data infrastructure within the individual and the organizations that drive the efficiency nf new business and lead to the formation of the revenue models. They include the blockchain and distribution database and include a variety of technology and other capabilities.
Find out more information about the multi-party systems.
brainly.com/question/1083660
B Urine
C Brass
D Sand
8. Separation of mixtures of solids with various sizes
include
A magnetic separation.
B coarsing
sublimation.
Air
Answer:
B
Explanation:
Three single-phase, 7200 volt to 480 volt, 100 kVA transformers are connected in a step-down bank with the 7200 windings connected in wye and the 480 volt windings connected in delta. What is the rated line-to-line voltage on the wye side?
1. 12,470 V
2. 7,200 V
3. 4.160 V
4. 14,400 V
5. None of the above
Express the following numbers in decimal:
(a) (11001.1011)
2
(b) (A3.C)
16
(c) (75.16)
8
(d) (ABCD)
16
(a)
11001.1011₂ = 1×2⁴ + 1×2³ + 1×2⁰ + 1×2 ⁻¹ + 1×2 ⁻³ + 1×2 ⁻⁴
… = 16 + 8 + 1 + 1/2 + 1/8 + 1/16
… = 411/16
(b) In base 16, we have A₁₆ = 10 and C₁₆ = 12, so
A3.C₁₆ = 10×16¹ + 3×16⁰ + 12×16 ⁻¹
… = 160 + 3 + 12/16
… = 2620/16 = 655/4
(c)
75.16₈ = 7×8¹ + 5×8⁰ + 1×8 ⁻¹ + 6×8 ⁻²
… = 56 + 5 + 1/8 + 6/64
… = 3918/64 = 1959/32
(d) B₁₆ = 11 and D₁₆ = 13, so
ABCD₁₆ = 10×16³ + 11×16² + 12×16¹ + 13×16⁰
… = 40960 + 2816 + 192 + 13
… = 43981
What are the factors that influence the power input to the compressor?
a) The mass flow of air
b) The pressure ratio of the compressor
c) The inlet temperature
d) Temperature difference between the inlet and outlet
e) The properties of the working medium
Answer:
option e is correct answer
What is Traction Control System?
Answer:
A traction control system is a secondary function of electronic stability control on production motor vehicles, designed to prevent loss of traction of the driven road wheels.
The electrical contractor association is typical example of a
Answer:
Trade association.
Explanation:
I'm thinking it is as it represents contractors who design, install, inspect and maintain amongst other activities electrical and electronic equipments or service.
Rt = R1 + R2 + R3
[tex] \frac{1}{rt} = \frac{1}{r1} + \frac{1}{r2} + \frac{1}{r3} [/tex]
If R1 = 4Ω , R2 = 6Ω and R3 = 8Ω (Ω= ohm)
Calculate: 4.1.1 Rt (series)
4.1.2 Rt (parallel)
Answer:
In series:
[tex] \frac{1}{r} = \frac{1}{r_{1} } + \frac{1}{r _{2} } + \frac{1}{r_{3} } [/tex]
[tex] \frac{1}{r} = \frac{1}{4} + \frac{1}{6} + \frac{1}{8} \\ \\ \frac{1}{r} = \frac{13}{24} \\ \\ r = \frac{24}{13} \\ { \underline{r = 1.85 \: Ω}}[/tex]
In parallel:
[tex]r = r _{1} + r _{2} + r _{3} \\ r = 4 + 6 + 8 \\ r = 18Ω[/tex]
20 pts!
Calculate or write the formula please
A) the value of “dd”
B) the angle theta1
C) angle of transmission (μ)
Answer:
A the value of dd because you can see how the value is to the dd
Do you think that the country that has the right to force vaccinations on the community?
Answer:
no
Explanation:
we all have the freedom to choose whether we want to have something injected in our bodies that we aren't sure about. This would be a violation of our constitutional right to force us to take the vaccine.
a skilled technician with several years of experience who is employed to oversee the operation of a company or maintenance department is a
Answer:
business operation Manager
Which statement most thoroughly describes the profession of an engineer?
Engineers work in teams to design and implement various products using specific processes.
Engineers should never complete a project without collaborating with experts in other fields.
Engineers strive to complete a project in the most cost-conscious and timely manner possible.
Engineers are being increasingly constrained by governmental regulations, limiting their creativity and effectiveness.
Answer:
Engineers work in teams to design and implement various products using specific processes.
Engineers work in teams to design and implement various products using specific processes. The correct option is A.
Who is an engineers?An engineer is a person who designs, builds, and maintains machinery and structures like bridges, railroads, and highways using scientific knowledge.
The word engineer, from which the term engineering is derived, was first used in 1390 to refer to "a constructor of military engines." The term engine'er literally means "one who operates an engine."
In this now-outdated meaning, the term "engine" refers to a military machine, or a mechanical device employed in battle.
An engineer is someone who practices engineering, and those who are qualified to do so may hold more official titles like "Designated Engineering Representative," "Professional Engineer," "Chartered Engineer," "Incorporated Engineer," "Ingenieur," or "European Engineer."
Teams of engineers design and deploy various goods utilizing predetermined procedures.
Thus, the correct option is A.
For more details regarding engineer, visit:
#SPJ2
1. An ideal gas undergoes a process according to PV" = k. Initially, the temperature and volume are 2 bar and 0.1m?, respectively. After the process, the volume doubles. Determine the work done during the process. Take n = 1.4
tìm phản lực gối tựa
Answer:
jwjehevrvbdbejd HB dbnwjsishrb t bxjwbkozkwnwn shxvbebhgvevhehjhr. jebn
Tech A says that open loop is when the PCM pretty much ignores the oxygen sensor signals. Tech B says that closed loop is when the PCM shuts off the fuel injectors during a collision. Who is correct
Answer:
Tech A
Explanation: