Answer:
The water in the 75 mL beaker will cool down more rapidly then the water in the 500 mL beaker.
Explanation:
The scale of an object influences the object's properties. For example, the water in a small beaker loses heat more rapidly than the water in a large beaker. This is because heat loss decreases as volume increases. As the scale of a beaker increases, its volume increases. Therefore, the larger the beaker, the slower the water inside the beaker will cool.
At STP, a 50.-gram sample of H2O() and a100.-gram sample of H2O() have
Answer:
2
Explanation:
because it same volume
7. A scientist is trying to determine the identity of an element. It is highly reactive in water
and forms an ionic bond with chlorine. It is also very shiny. The element is likely
(1 point)
from Group 17.
from Group 1.
from Group 15.
a noble gas.
Which of the following would be a warning sign that information about a weight loss medication is not reliable science?
Answer: The correct answer is B.
Explanation: The scientists and all test subjects involved in the investigation work for the company that sells the medication and science product or similar is only considered as reliable if it has been tested following the scientific method and if there are not interests that can affect the process.
A conclusion in science states whether or not a hypothesis is correct
or not?
Answer:it do not states
Explanation:
HELPPPP . what is this
I'll be honest I'm guessing,
but maybe D
If the number of equally likely sample outcomes of a single ASAP! stage of an experiment is 4, what is the total number of elements in the sample
space if the experiment has 3 stages?
OA. 16
OB. 12
OC. 64
OD. 81
Answer:
C. 64
Explanation:
Given:
The number of equally likely sample outcomes of a single stage = 4
Unknown:
Total number of elements if there are three stages= ?
Solution;
Probability is the likelihood of an event to occur.
In this problem;
For a single stage, the likely outcome is 4
So therefore;
For the 3 stages 4 x 4 x 4 = 64
Therefore, the total number of elements in the sample space of an experiment with 3 stages is 64
X-ray crystallography is used to see the structure of molecules. Scientists have used this technique to find the structure of cholesterol, an important biological molecule.
Knowledge of the structure of cholesterol is helpful because it may affect
A. how cholesterol works in the body.
B. the amount of cholesterol that is considered healthy.
C. previous ideas about which foods contain cholesterol.
D. previous explanations of how cholesterol works in the body.
Answer:
A. how cholesterol works in the body.
Explanation:
If we know the precise structure of a molecule (by X-ray crystallography), we can understand more about how it interacts with cells, proteins, and other molecules. It can also tell us what reactions it might take part in.
Therefore, we can learn more about how it works in the body and what activities it takes part in in the cells of the body.
Answer:
A
Explanation:
nuityyy
15. List the substances A-E in order from most dense to least dense based on the facts provided.
Please write the letters in the spaces provided below.
Substance A: 8.2 g/cm3
Substance B: 3.5 cm and 30.0g
Substance C: 10.0g and 40mL
Substance D: 0.5 g/cm3
Substance E: 2.0cm by 3.0cm by 1.0cm and 4.0g
Most Dense_ _ _ _ _
Least Dense
Answer:
So 1st it is B then D then E then a then C
The order of density of substances ranging from most dense to least dense is :substance B>substance A>substance E>substance C>substance D.
What is density?It is a ratio of substance's mass per unit of volume.Symbol most commonly used for density is р.The SI unit of density is kilogram per cubic meter .It explains how tightly a material is packed together.
There are 2 types of density :1)absolute density 2) relative density.Absolute density is the mass of any substance per unit volume and relative density is the ratio of density of a substance to the density of a given reference material.
Reference material used for relative density is water.The instrument used for measuring density or relative density of liquids is hydrometer. Density is measured at constant temperature and pressure.
To learn more about density and it's types click here:
https://brainly.com/question/15164682
#SPJ2
moves.
whats the meaning
Speed ?
and the
meaning of
of Motion?
Hurry I have 15 minutes please help
Answer:
Speed: The rate at which someone or something is able to move or operate. Motion: The action or process of moving or being moved.
Explanation:
I pretty much explained it in the answer, have a good one!
Pls Sub to my channel: it's at YT, /channel/, then UCHgDIEsCCSJlYN3Kg2LOgow?
which of the following is NOT a characteristic of minerals
A. Occur in gaseous and liquid state
B. Formed by inorganic processes
C. naturally occurring
D. definite chemical composition
Answer:
A. Occur in gaseous and liquid state
Explanation:
The choice that is not a characteristic of minerals is that minerals occur in gaseous and liquid state.
All minerals are solid inorganic compounds.
A mineral is an inorganic compound that is formed naturally. They have a definite and specific chemical composition. Minerals are the building blocks of rocks. When minerals aggregates together, they form different rock types. There is no known mineral that is in fluid state. All minerals are solids. Examples are quartz, kaolinite, gypsum e.t.cSOMEONE ANSWER NOW
Which statement best explains why light can travel with or without a medium?
A medium is necessary for light waves to travel.
Light waves cannot travel in a vacuum.
Light waves are longitudinal waves that do not require a medium to travel.
Transverse waves do not require a medium to travel.
Explanation:
its light waves cannot travel through vaccum
hope it helps
Answer:
Transverse waves do not require a medium to travel.
Explanation:
What is the mass of protons neutrons and electrons PLZ HURRY
Answer:
Mass of proton neutron and electron
Protons, neutrons, and electrons: Both protons and neutrons have a mass of 1 amu and are found in the nucleus. However, protons have a charge of +1, and neutrons are uncharged. Electrons have a mass of approximately 0 amu, orbit the nucleus, and have a charge of -1.
Explanation:
Hope this helps :)
what feature has disneyland's management added to lengthen the visitor's stay
Answer:
where are the options?
Explanation:
You have three mugs of tea:
a. Is a small mug. It is 100°F
b. Is a large mug. It is 120°F
c. Is a small mug. It is 120°F
Put these mugs in order. Start with the mug with the SMALLEST amount of thermal energy first and end with the mug with the LARGEST amount of thermal energy.
__2__ C. is a small mug. It is 120°F
__3__ A. is a small mug. It is 100°F
__1__ B. is a large mug. It is 120°F
Answer:
ACB
Explanation:
Thermal energy is the average sum of all kinetic energy of all the molecules of gases. The correct order of mug in decreasing thermal energy is C>A>B.
What is Thermal energy?
Thermal energy is a energy which is possess by a moving object. It is directly proportional to kinetic energy of the molecules. It is very difficult to find the correct value of kinetic energy so we find average kinetic energy. Which is very easy to calculate as compared to calculating kinetic energy. Average kinetic energy is directly proportional to temperature. It is not dependent on the type of gases or mass of gases.
Mathematically,
K.E=2/3KT
Where,
K= Boltzmann constant
T is the temperature
Between A and C whose volume is same, 120°F is the highest temperature so, C will have high thermal energy than A. C will have lowest thermal energy as it has volume larger than that of A and C.
Therefore, the correct order of mug in decreasing thermal energy is C>A>B.
Learn more about the thermal energy, here:
https://brainly.com/question/3022807
#SPJ2
2.54 mL of ethanol to mol ethanol (Hint: the density of ethanol is 0.789
g/mL.)
0.04350179862
Explanation:
Make sure to check for sig figs though. Basically, you have 2.54 mL and you multiply that by the 0.789 g/mL and mL cancels out and you are left with 2.00406g. There are 46.06844 grams per mol of ethanol, so to cancel out grams we multiply by 1/46.06844. And then we are left with 0.04350179862 mol
Which science is the study of living organisms? physics astronomy chemistry biology
Answer:
biology
Explanation:
biology is the study of living g things
Answer:
The answer you would be looking for is Biology
what isotope has a mass number of 18 and an atomic number of 7
Answer:
nitrogen 18
nitrogen has an atomic number of 7
the male and female sex cells combine to form a
Answer:
zygote
Explanation:
In human beings, each gamete contains 23 chromosomes, half the number found in the other cells of the body. When the male and female gametes fuse, they become a zygote containing the full 46 chromosomes, half of which came from the father and half from the mother.
Answer:
zygote
Explanation:
In human beings, each gamete contains 23 chromosomes, half the number found in the other cells of the body. When the male and female gametes fuse, they become a zygote containing the full 46 chromosomes, half of which came from the father and half from the mother.
The basis of the VSEPR model of molecular bonding is __________. Question 1 options: atomic orbitals of the bonding atoms must overlap for a bond to form regions of electron density in the valence shell of an atom will arrange themselves so as to maximize overlap electron domains in the valence shell of an atom will arrange themselves so as to minimize repulsions regions of electron density on an atom will organize themselves so as to maximize s-character Question 2 (1 point)
Answer:
Electron domains in the valence shell of an atom will arrange themselves so as to minimize repulsions
Explanation:
In accordance with VSEPR theory, the electron domains or electron pairs on the valence shell of the central atom in a molecule always position themselves as far apart in space as possible in order to minimize repulsions.
Recall that according to VSEPR theory, the shape of a molecule depends on the number of electron pairs or electron domains on the valence shell of the central atom of the molecule, both lone pairs and bond pairs. Lone pairs are known to cause more repulsions than bond pairs.
write the unit of electric charge
Answer: the electric charge is the atomic number
14)
A Kelvin temperature equivalent to 25°C is:
A)
-248K
B)
25K
C)
248K
D)
298K
Answer:
25°C + 273.15 = 298.15K , so D.) is the Answer
Explanation:
What element is [Xe]6s24f5d6
Answer:
Holmium
Explanation:
Electronic configuration:
[Xe] 6s² 4f⁵ 5d⁶
To know this element, we must first find the atomic number and then look for its position on the periodic table.
Number of electrons in [Xe] = 54;
So the total number of electrons = 54 + 2 + 5 + 6 = 67
This element has an atomic number of 57. On the periodic table, it is Holmium
What happens when water turn’s into gas
Answer:
The process of turning water into gas is called evaporation. When water is heated, it changes state from a liquid to a solid. No mass is destroyed during the process, but rather, it is converted into gas.
Explanation:
Brainliest Plzzz!!!
Will IO- and NaOH form a buffer?
Answer:
this is the answer for will NaOH be a buffer
Explanation:
The compound CH 3NH 3Cl is a salt made from that weak base, so the combination of these two solutes would make a buffer solution. NH 3 is a weak base, but NaOH is a strong base. The combination of these two solutes would not make a buffer solution
An unknown compound containing tellurium and bromine is analyzed
and it is determined that 28.53% of the compound by mass is
composed of tellurium.
How many moles of Te are present in 100.00 g of the compound?
Answer:
The correct answer is 0.22 mol Te.
Explanation:
First, we have to calculate the mass of Te in the sample. We simply multiply the sample mass by the percentage of Te (28.53%= 28.53/100)
100.00 g x 28.53/100 = 28.53 g Te
The molar mass of Te is 127.60 g. Thus, the mass of 1 mol of Te is 127.60 g. With this, we calculate how many moles of Te there are in 28.53 g of Te:
28.53 g Te x 1 mol Te/127.60 g Te= 0.223 mol ≅ 0.22 mol
HELPPPPPPPPP
50. How many joules of heat must be absorbed by 0.375 kg of water to raise its temperature by 45.0 to 70.0°C. Specific heat of water is 4.184 J/gC or 1.0 cal/gC
51. What mass of water can be heated from 25.0 to 50.0°C by the adding of 2825 Joules?(Cp of H2O=4.184 J/g °C)
Answer:
50. 54,915 J
51. 27.0 g
Explanation:
The dimensional analysis tells you how to compute these. Multiplying specific heat, J/(g·°C), by the product of mass and temperature change will give you energy.
__
50. (375 g)((70 -45) °C)(4.184 J/(g·°C)) = 54,915 J
__
51. M((50 -25)°C)(4.184 J/(g·°C)) = 2825 J
M = 2825/104.6 g ≈ 27.0 g
Write balanced net ionic equations for the reactions, if any, that occur between
(a.) Fe2S3 (s) and HBr (aq)
(b.) K2CO3 (aq) and Cu(NO3)2 (aq)
(c.) Fe(NO3)2 (aq) and HCl (aq)
(d.) Bi(OH)3 and HNO3 (aq)
Answer:
a) Fe₂S₃(s) + 6H⁺(aq) ---> 6HBr(g) + Fe³⁺
b) Net ionic equation: Cu²⁺(aq) + CO₃²⁻(aq) ---> CuCO₃(s)
c) No reaction
d) Net ionic equation: Bi(OH)₃(s) + 3H⁺(aq) ---> Bi³⁺(aq) + 3H₂O
Explanation:
a) This is a double displacement reaction between solid iron(iii) sulphide and hydrobromic acid to produce hydrogen sulphide gas. The full and net equations of the reaction are given below:
Fe₂S₃(s) + 6HBr(aq) ---> 2FeBr₃ + 3H₂S(g)
Net ionic equation: Fe₂S₃(s) + 6H⁺(aq) ---> 6HBr(g) + Fe³⁺
b) This is a double displacement reaction between potassium carbonate and copper (ii) nitrate to produce insoluble copper (ii) carbonate. The full and net equations of the reaction are given below:
K₂CO₃(aq) + Cu(NO₃)₂(aq) ---> KNO₃(aq) + CuCO₃(s)
Net ionic equation: Cu²⁺(aq) + CO₃²⁻(aq) ---> CuCO₃(s)
c) No reaction as no precipitate is formed
d) This is a neutralization reaction between bismuth (iii) hydroxide and trioxonitrate (v) acid to produce sat and water. The full and net equations of the reaction are given below:
Bi(OH)₃(s) + 3HNO₃(aq) ---> Bi(NO₃)₃(aq) + 3H₂O(l)
Net ionic equation: Bi(OH)₃(s) + 3H⁺(aq) ---> Bi³⁺(aq) + 3H₂O
Organic whole wheat flour sells in bags weighing 2.915 kilograms.
How much flour is this when rounded to the nearest tenth? Use a place value chart and number line to explain your thinking.
Answer:
2.920
Explanation:
This question tests your knowledge of approximation. If we look at the place values after the decimal point, we have, .915. This corresponds to hundredth, tenth and unit.
Since we have 9.15, in rounding it to the nearest tenth, we have to round it up to .920.
Hence, the weight of the flour to the nearest tenth is 2.920.
Are you a fire alarm? Cause you're loud and annoying
Answer:
yaaaaa babdbabaaaa lolll
Explanation:
The element with 6 valence electrons and 3 energy level is
Answer:
sulfur
Explanation: