MUST BE RIGHT AND DONE ASASP 100 POINTS

Two acids commonly used in the manufacture of fertilizers are sulfuric acid and phosphoric acid

If the route length is constant, the intercept of the calibration curve should be zero, and the slope should be proportional to the molar absorptivity times the path length.

Beer's law, which links absorbance to concentration, is represented by a linear function. The molar attenuation coefficient multiplied by the cuvette width, or pathlength—1 centimetre in this lab—gives you the slope of your calibration curve. To find the concentration, rearrange the linear solution.

According to Beer's Law, a solution's absorbance (A) is inversely proportionate to its concentration.

A = εcl

The molar absorptivity () times the route length (l) are represented by the calibration curve's slope (m):

m = εl

If the route length is constant, the calibration curve's intercept (b) should be zero because there shouldn't be any absorbance at zero concentration:

b = 0

To know more about calibration curve visit:-

https://brainly.com/question/29729322

#SPJ9

It's easy

Explanation:

We can use the equilibrium constant expression to calculate the equilibrium concentration of O2:

Kc = [SO3]^2 / ([SO2]^2 [O2])

At equilibrium, the value of Kc is constant, so we can use the equilibrium concentrations of SO2 and SO3 to solve for [O2]:

Kc = [SO3]^2 / ([SO2]^2 [O2])

Kc = (11.0 M)^2 / ((4.20 M)^2 [O2])

Simplifying:

[O2] = (11.0 M)^2 / (Kc (4.20 M)^2)

The value of Kc for this reaction is 4.67 × 10^1, as determined by experiment.

[O2] = (11.0 M)^2 / (4.67 × 10^1 (4.20 M)^2)

[O2] = 0.153 M

Therefore, the equilibrium concentration of O2 in this mixture is 0.153 M.

The candle and the wax represent the structure. Everything that is not a part of the flame or the wax, such as the air, items in the room, and anything else, is considered to be the surroundings. As the liquid wax solidifies, heat is transferred from the wax to the environment.

Wax fire causes a chemical change while wax melting causes a physical change: Wax changes from a solid to a liquid on its own when it melts. Only the physical state of a substance alters in the described procedure.

The New York Times claims that the majority of a candle's material truly evaporates into the air. Actually, the wax rises as it begins to melt and pool around the cotton flame of the candle.

To know more about liquid wax visit:-

https://brainly.com/question/26305599

#SPJ9

Answer:

Explanation:Explore this page

About the gas laws calculator

This is an ideal gas law calculator which incorporates the Boyle's law , Charles's law, Avogadro's law and Gay Lussac's law into one easy to use tool you can use as a:

Boyle's Law-

[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]

(Pressure is inversely proportional to the volume)

Where-

As per question, we are given that -

Now that we have all the required values and we are asked to find out that volume which will be occupied if the pressure is adjusted to 80 KPa and the temperature remains unchanged. For that we can put the values and solve for the final volume of helium-

[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 100 \times 160 = 80 \times V_2\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{100 \times 160}{80}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 =100\times \cancel{\dfrac{ 160}{80}}\\[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 = 100 \times 2\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 200 \:cm^3 }\\[/tex]

The periodic table is arranged in such a way that elements with similar valence electron configurations are placed in the same group or column.

Valence electrons are the outermost electrons in an atom, and they play a critical role in determining the chemical properties of an element.

The elements in each column of the periodic table have the same number of valence electrons, which gives them similar chemical properties

Learn more about valence:https://brainly.com/question/12744547

#SPJ1

The CO gas produced in the first equation is used in the second equation to produce CO2 in the final equation.

In the intermediate equations, solid carbon (C) and molecular oxygen (O2) are transformed into gaseous carbon monoxide (CO), which is then reacted with more oxygen to produce carbon dioxide (CO2).

The final chemical equation can be created by combining the intermediate equations and cancelling out the intermediate reactant and product (CO and O2) to obtain the overall balanced equation for the reaction:

C(g) + O2(s) = CO2 (g)

Thus, the CO generated in the first equation is consumed in the second equation and does not show up in the third and final equation. The two intermediate reactions' combined outcome is represented by the final equation, which only includes the reactants (C and O2) and product (CO2).

Learn more about molecular oxygen here:

https://brainly.com/question/11587330

#SPJ1

Answer:

they are said to be excited.

Explanation:

excitation is a fundamental concept in atomic physics that helps explain many of the properties and behaviors of matter on both the macroscopic and microscopic scales.

Equilibria are chemical reactions that happen with a change in the concentration of the reactants or products. If the forward reaction is favored, a greater concentration of the product will be formed than the reactant(s), and the reaction is said to be favored. If the reverse reaction is favored, a greater concentration of the reactant(s) will be formed and thus the reaction is said to be favored. An equilibrium constant (constant K), is a number that describes the ratio of products to reactants at an equilibrium. K is also referred to as the equilibrium coefficient.

Answer:

1. Kc = [Ba2+][SO42-]

2. Kc = [CH3COO-][H3O+]/[CH3COOH]

Explanation:

The equilibrium constant expression for Kc is the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients.

1. For the first equilibrium, BaSO4(s) <---->Ba2+(aq) + SO42-(aq), the equilibrium constant expression for Kc is: Kc = [Ba2+][SO42-].

2. For the second equilibrium, CH3COOH (aq) + H2O (l) <—>CH3COO- (aq) + H3O+ (aq), the equilibrium constant expression for Kc is: Kc = [CH3COO-][H3O+]/[CH3COOH].

Note that the concentration of water is not included in the expression because it is a pure liquid and its concentration is considered constant.

In order for 2.5 g of gallium to transform from a solid state at 25.0 °C to a liquid state at 29.9 °C, it would require absorbing 19.56 J of heat from your hand.

Only gallium has a low melting point of 29.7°C and a high boiling point of 1500–2000°C. Together with these peculiar characteristics, it also exhibits undercooling (20 °C or below), which would make it a perfect thermometric liquid if not for its propensity to wet quartz and glass surfaces.

Q1 = m × c × ΔT

Q1 = 2.5 g × 0.372 J/g·°C × (29.9 °C - 25.0 °C)

Q1 = 5.58 J

Q2 = m × ΔH_fusion

Q2 = 2.5 g × 5.59 J/g

Q2 = 13.98 J

Q_total = Q1 + Q2

Q_total = 5.58 J + 13.98 J

Q_total = 19.56 J

To know more about solid state  visit:-

https://brainly.com/question/29488795

#SPJ1

Answer:

Divide the mass of the water lost by the mass of hydrate and multiply by 100. The theoretical (actual) percent hydration (percent water) can be calculated from the formula of the hydrate by dividing the mass of water in one mole of the hydrate by the molar mass of the hydrate and multiplying by 100.

Answer:

im just here grabbing points dont take me as rude or anything

Explanation:

yours appreciatively bye

Answer:

With the adsorption of cations like zinc as Zn (OH)+ or ZnCl+ or both, the anion exchange is known to increase. The solid phase has an impact on the anions' concentration in the soil solution. Anions are negatively adsorbed as a result of the exchange complex's overall negative charge.

Answer:

we're is the diagram I don't see it

The change in enthalpy for the given reaction is +330 kJ.

To calculate the change in enthalpy for the reaction:

4XY3 + 7Z2 ⟶ 6Y2Z + 4XZ2

we need to use the Hess's Law, which states that if a chemical reaction can be expressed as the sum of several stepwise reactions, the enthalpy change of the overall reaction is equal to the sum of the enthalpy changes of the individual reactions.

We can write the reaction in terms of the given thermochemical equations as follows:

4XY3 ⟶ 2X2 + 6Y2 (reverse of equation 1, with ΔH = +370 kJ)

2X2 + 4XZ2 ⟶ 8XY3 (multiply equation 2 by 2, with ΔH = -2×130 kJ = -260 kJ)

2Y2 + Z2 ⟶ 2Y2Z (reverse of equation 3, with ΔH = +220 kJ)

Adding these three equations gives:

4XY3 + 7Z2 ⟶ 6Y2Z + 4XZ2 (with ΔH = 370 kJ - 260 kJ + 220 kJ = +330 kJ).

Learn more about enthalpy here:

https://brainly.com/question/3393755

#SPJ1

The chemical formula for the product.

(a)Orbital diagram for Li:

1s² 2s¹

Orbital diagram for S:

1s² 2s² 2p⁶ 3s² 3p⁴

Lewis structure for Li:

Li: [Li]+

Lewis structure for S:

:S:::S:

Combination of Li and S:

Li₂S

(b)

Orbital diagram for Ca:

1s² 2s² 2p⁶ 3s² 3p⁶ 4s²

Orbital diagram for Cl:

1s² 2s² 2p⁶ 3s² 3p⁵

Lewis structure for Ca:

Ca: [Ca]²⁺

Lewis structure for Cl:

:Cl:

Combination of Ca and Cl:

CaCl₂

(c)

Orbital diagram for K:

1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹

Orbital diagram for Cl:

1s² 2s² 2p⁶ 3s² 3p⁵

Lewis structure for K:

K: [K]+

Lewis structure for Cl:

:Cl:

Combination of K and Cl:

KCl

(d) Orbital diagram for Na:

1s² 2s² 2p⁶ 3s¹

Orbital diagram for N:

1s² 2s² 2p³

Lewis structure for Na:

Na: [Na]+

Lewis structure for N:

:N:::N:

Combination of Na and N:

Na₃N

An orbital diagram is a visual depiction of the electrons located in an atom's or molecule's orbitals. Each electron is represented by an arrow, while each orbital is illustrated by a line.

The two electrons in each orbital's two lines are drawn in pairs to represent their opposing spins. Lewis structures, on the other hand, are schematics that display the interactions between the atoms in a molecule as well as any potential lone pairs of electrons.

Each atom's valence electrons are shown as dots, and the connections between atoms are shown as lines. The kind of bond that can be created between two elements depends on the number of valence electrons.

learn more about valence electrons here

https://brainly.com/question/371590

#SPJ1

Hydrogen is the limiting reactant and chlorine is in excess since there is less hydrogen chloride that can be made from it (4.56 g) than there is chlorine (51.7 g) that can. As a result, 4.56 g of hydrogen chloride can be generated.

Let's first determine how much hydrogen chloride can be made from 0.490 g of hydrogen. We'll convert from moles of hydrogen to moles of hydrogen chloride using the balanced chemical equation:

1 mole of H2 yields 2 moles of HCl.

4.56 g HCl is equal to 0.490 g H2 times (1 mole H2 / 2.016 g H2), 2 moles HCl to 1 mole H2, and 36.46 g HCl to 1 mole H2.

The result is that 4.56 g of hydrogen chloride may be made from 0.490 g of hydrogen.

Let's now determine how much hydrogen chloride 50 g of chlorine can yield:

Cl2 creates 2 moles of HCl from 1 mole.

50.0 g Cl2 multiplied by (1 mole Cl2/70.90 g Cl2), (2 moles HCl/Mole Cl2), and (36.46 g/Mole Cl2) results in 51.7 g HCl.

The result is that 50.0 g of chlorine can make 51.7 g of hydrogen chloride.

To know more about chlorine gas visit:

https://brainly.com/question/29577369

#SPJ1

Explanation:

o solve this problem, we need to use the relation between pOH, pH, and the dissociation constant of the conjugate base of the weak acid, which is given by:

Kb = Kw / Ka

where Kb is the dissociation constant of the conjugate base, Ka is the dissociation constant of the weak acid, and Kw is the ion product constant of water, which is 1.0 x 10^-14 at 25°C.

First, we need to find the pH of the solution, since we know the pOH:

pH + pOH = 14

pH = 14 - 4.90 = 9.10

The weak acid in this case is the acetic acid (CH3COOH), which dissociates in water according to the equation:

CH3COOH + H2O ↔ CH3COO- + H3O+

The dissociation constant of acetic acid (Ka) is 1.8 x 10^-5 at 25°C. We can use this value and the relation between Ka and Kb to find Kb:

Kb = Kw / Ka = 1.0 x 10^-14 / 1.8 x 10^-5 = 5.56 x 10^-10

Therefore, the Kb of acetate is 5.56 x 10^-10.

Answer:

The two true statements about natural selection are:

A population's environment affects the outcome of natural selection.

Natural selection can change which variations are more common in a population over time.

Natural selection acts on the existing variations within a population and favors those that confer a survival or reproductive advantage in a particular environment. Over time, the advantageous variations become more prevalent, and less advantageous ones may become less common or disappear from the population. However, natural selection does not necessarily create new variations; rather, it acts on the genetic variation that already exists within a population.

Answer: Sex-linked traits are different from other traits because they are located on the sex chromosomes. Since males and females have different numbers of these chromosomes, the inheritance of sex-linked traits is different between the two sexes. This means that certain traits are more likely to be expressed in males than in females, and that females can inherit these traits from both parents while males can only inherit them from their mother.

Explanation: Sex-linked traits follow different patterns of inheritance than other traits because they are located on the sex chromosomes (X and Y) rather than on the autosomes (non-sex chromosomes). Since males have one X and one Y chromosome, and females have two X chromosomes, the inheritance of sex-linked traits is affected by the sex of the individual and the number of copies of the gene present.

The X chromosome contains many more genes than the Y chromosome and therefore, most sex-linked traits are inherited in a dominant or recessive manner on the X chromosome. In females, the presence of two copies of the X chromosome allows for a greater range of genetic variability, as both copies can potentially express different alleles. In males, however, the presence of only one X chromosome means that any alleles on that chromosome will be expressed, regardless of whether they are dominant or recessive. This is why sex-linked traits are more commonly expressed in males than in females.

Additionally, since males only inherit one X chromosome from their mother, they can only inherit X-linked traits from her. Females, on the other hand, inherit one X chromosome from each parent, which means they can inherit X-linked traits from both their mother and father. This can affect the frequency and distribution of certain sex-linked traits in a population.

Overall, the unique inheritance patterns of sex-linked traits are a consequence of their location on the sex chromosomes and the differences in chromosome inheritance between males and females.

The data table supports the idea that valence electrons affect the chemical characteristics of elements and may be used to forecast chemical reactions by showing how the amount of valence electrons follows different patterns on the periodic table.

The number of valence electrons in groups 1-2 and 13–18 rises by one from one element to the next throughout each row, or period, of the periodic table.

The ability of an atom to make covalent bonds with other atoms is known as its "valency." Valence electrons, on the other hand, are the quantity of electrons required in a compound's entire outer shell in order for bonds to form.

To know more about electrons visit:-

https://brainly.com/question/28977387

#SPJ1

According to the stimulation, if the bulk of the plants is the same, there will be no change.

Planets have varying masses because they are formed of diverse materials, and their mass dictates their thickness and thinness.

The weight of an item is determined by its mass and the strength with which gravity pulls on it. The strength of gravity is proportional to the distance between two objects. As a result, the same thing weights differently on various planets.

The mass indicates the influence of gravity as well as the density of the atmosphere. If the masses are the same, all planets will be the same size, and many will be incapable of supporting life.

Find out more information about the simulation.

brainly.com/question/25896797.

#SPJ1

Answer:

There are 4.59×1024 4.59 × 10 24 atoms of Al in 7.63 moles of Al.

The reaction between magnesium (Mg) and potassium sulfate (K2SO4) is a double displacement reaction that occurs in an aqueous solution. The products that will form depend on the solubility of the resulting compounds.

When Mg and K2SO4 react, magnesium sulfate (MgSO4) and potassium (K) will be produced. This is because the magnesium will displace the potassium ion in the potassium sulfate compound, resulting in the formation of magnesium sulfate and potassium metal.

The balanced chemical equation for this reaction is:

2Mg + K2SO4 → MgSO4 + 2K

It is important to note that this reaction will only occur if the magnesium is more reactive than the potassium in the solution. If the opposite were true, no reaction would occur.

To know more about double displacement reaction , visit:

https://brainly.com/question/29307794

#SPJ1

Answer

The first step is to use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Rearranging the equation to solve for n, we get:

n = PV/RT

Substituting the given values, we get:

n = (1.35 atm) x (11.2 L) / [(0.0821 atm·L/mol·K) x (298 K)]

n = 0.553 mol

Therefore, there are 0.553 moles of helium gas present in the 11.2L container at 298K and 1.35 atm.

the pH of the aqueous solution is 8.51 with a hydrogen ion concentration of [H+]=3.1×[tex]10^-9[/tex]M

The pH of the aqueous solution can be calculated using the formula:

pH = -log[H+]

where [H+] is the hydrogen ion concentration of the solution.

Substituting the given value, we get:

pH = -log(3.1×[tex]10^-9[/tex])

pH = 8.51

An aqueous solution is one in which water serves as the solvent. It is utilised in a variety of applications, including analytical chemistry, biochemistry, and industrial chemistry. It is the most prevalent kind of solution used in chemical reactions. Water serves as both the solvent and the solute in an aqueous solution, where the solute is often a solid, liquid, or gas. Due to its high polarity and capacity to make hydrogen bonds with other molecules, water is an excellent solvent that can dissolve a variety of materials, including polar molecules and ionic compounds. Acid-base reactions, redox reactions, and precipitation reactions are just a few of the numerous chemical processes that take place in aqueous solutions. A variety of variables can have an impact on an aqueous solution's characteristics.

Learn more about aqueous solution here:

https://brainly.com/question/26856926

#SPJ1

Below contains the complete lab report on electromagnetic spectrum

Name: [Your Name]

Title: Electromagnetic Spectrum Lab Report

Instructor: [Instructor's Name]

Objectives:

The purpose of this lab is to analyze the elemental composition of different astronomical bodies using a virtual spectrometer and understand the importance of the electromagnetic spectrum in astronomical research.

Hypothesis:

I predict that the moons and planets will have varying compositions of elements, with hydrogen and helium being more common in gaseous bodies and heavier elements like carbon and nitrogen more common in rocky bodies.

Dependent variable: Presence of elements in astronomical bodies

Independent variable: Astronomical bodies (Moon One, Moon Two, Planet One, Planet Two)

Data:

[Please input your data for each object as per your virtual lab results]

Conclusion:

In this lab, I investigated the elemental composition of four different astronomical bodies using a virtual spectrometer and observed the presence or absence of various elements.

It is essential to use many types of equipment when studying space because different instruments can detect and analyze different aspects of the electromagnetic spectrum, providing a comprehensive understanding of the universe.

To make these moons and planets similar to Earth, oxygen would need to be present as it is a vital component of the carbon cycle and essential for life as we know it.

The electromagnetic spectrum helps us find out the makeup of stars by analyzing the emitted light, which contains information about the elements and their abundance within the star.

Determining the elements that a planet or moon is made up of helps us understand their formation, potential for life, and possible resources for future exploration or colonization.

Read more about Electromagnetic Spectrum Lab Report here:

https://brainly.com/question/30699255

#SPJ1