Please do the Convex Mirror ray Diagram.
A CONVEX mirror has a radius of curvature with absolute value 20 cm. Find graphically the image of an object in the form of an arrow perpendicular to the axis of the mirror at object distances of (a)

Answers

Answer 1

Answer:

To determine the image formed by a convex mirror for different object distances, let's examine the following object distances:

(a) Object distance (u) = 10 cm

Explanation:

To determine the image formed by a convex mirror for different object distances, let's examine the following object distances:

(a) Object distance (u) = 10 cm

To construct the ray diagram:

Draw the principal axis: Draw a horizontal line representing the principal axis of the convex mirror.

Locate the center of curvature: Measure a distance of 20 cm from the mirror's surface along the principal axis in both directions. Mark these points as C and C', representing the center of curvature and its image.

Place the object: Choose an object distance (u) of 10 cm. Mark a point on the principal axis and label it as O (the object). Draw an arrow perpendicular to the principal axis to represent the object.

Draw incident rays: Draw two incident rays from the object O: one parallel to the principal axis (ray 1) and another that passes through the center of curvature C (ray 2).

Reflect the rays: Convex mirrors always produce virtual and diminished images, so the reflected rays will diverge. Draw the reflected rays by extending the incident rays backward.

Locate the image: The image is formed by the apparent intersection of the reflected rays. Mark the point where the two reflected rays appear to meet and label it as I (the image).

Measure the image characteristics: Measure the distance of the image from the mirror along the principal axis and label it as v (the image distance). Measure the height of the image and label it as h' (the image height).

Repeat these steps for different object distances as required.

Since you have not specified the remaining object distances, I can provide the ray diagrams for additional object distances if you provide the values.

Learn more about convex mirror here:

brainly.com/question/13647139

#SPJ11


Related Questions

Legend says that Archimedes, in determining whether or not the king’s crown was made of pure gold, measured its volume by the displacement method. If the crown’s weighs 14 Oz. in air. What its weight in ounces would be in olive oil (rho = 0.8 g/cm3 ) necessary to prove that it is pure gold?

Answers

According to the displacement method, Archimedes measured the volume of the king’s crown to determine whether or not it was made of pure gold.

To prove that it is made of pure gold, Archimedes had to use olive oil that weighs more than 100 oz. Thus, let us determine how much olive oil Archimedes would need to use: Mass of the crown in air = 14 oz Density of gold (Au) = 19.3 g/cm³Density of olive oil (ρ) = 0.8 g/cm³As the crown’s weight in air is given in ounces, we will convert its weight into grams:1 [tex]oz = 28.35 grams14 oz = 14 × 28.35 g = 396.9 g[/tex]The weight of the crown in olive oil (W’) can be calculated using the following formula: W’ = W × (ρ/ρ1)

where W is the weight of the crown in air, ρ is the density of olive oil, and ρ1 is the density of air. Density of air is approximately 1.2 g/cm³; therefore: [tex]W’ = 396.9 g × (0.8 g/cm³ / 1.2 g/cm³) = 264.6 g[/tex] Thus, the crown would weigh 264.6 grams in olive oil. As 1 oz = 28.35 g, the weight of the crown in olive oil is approximately 9.35 oz (to the nearest hundredth).Therefore, Archimedes would have needed to use more than 100 ounces of olive oil to prove that the crown was made of pure gold.

To know more about crown visit:

https://brainly.com/question/29023422

#SPJ11

A woman with a mass m=4.4kg stays on the back of a m=60kg and 6 meters long ship. At the beginning, woman and the ship were staying constant and Length from fromt part of the ship to the dock is 2 meters. Woman starts running to the duck with 1m/s velocity with respect to the ship. Assume that ship stays on the water with zero friction.
A) With respect to the dock, what is woman’s velocity in terms of m/s?

Answers

A woman with a mass m=4.4kg stays on the back of a m=60kg and 6 meters long ship. The woman's velocity with respect to the dock is approximately -0.07333 m/s.

To determine the woman's velocity with respect to the dock, we need to consider the velocities of both the woman and the ship.

Given:

Mass of the woman (m_w) = 4.4 kg

Mass of the ship (m_s) = 60 kg

Length of the ship (L) = 6 meters

Initial distance from the front of the ship to the dock (d_i) = 2 meters

Woman's velocity with respect to the ship (v_w/s) = 1 m/s

Since the woman and the ship are initially at rest relative to the dock, the total initial momentum of the system (woman + ship) is zero.

The final momentum of the system (woman + ship) is given by the sum of the momenta of the woman and the ship after the woman starts running.

The momentum of the woman (p_w) is given by:

p_w = m_w * v_w/s,

The momentum of the ship (p_s) is given by:

p_s = m_s * v_s,

where v_s is the velocity of the ship with respect to the dock.

Since the total momentum is conserved, we can write:

0 = p_w + p_s,

0 = m_w * v_w/s + m_s * v_s.

Solving for v_s, we get:

v_s = -(m_w / m_s) * v_w/s.

Substituting the given values, we have:

v_s = -(4.4 kg / 60 kg) * 1 m/s,

v_s = -0.07333 m/s.

Therefore, the woman's velocity with respect to the dock is approximately -0.07333 m/s. The negative sign indicates that she is moving in the opposite direction of the ship's motion.

To learn more about momentum

https://brainly.com/question/27988315

#SPJ11

Blood takes about 1.55 s to pass through a 2.00 mm long capillary. If the diameter of the capillary is 5.00μm and the pressure drop is 2.65kPa, calculate the viscosity η of blood. Assume η= (N⋅s)/m 2 laminar flow.

Answers

By using Poiseuille's law,the viscosity (η) of blood is approximately [tex]3.77 * 10^{-3} Ns/m^2[/tex]

To calculate the viscosity η of blood, we can use Poiseuille's law, which relates the flow rate of a fluid through a tube to its viscosity, pressure drop, and tube dimensions.

Poiseuille's law states:

Q = (π * ΔP *[tex]r^4[/tex]) / (8 * η * L)

Where:

Q = Flow rate of blood through the capillary

ΔP = Pressure drop across the capillary

r = Radius of the capillary

η = Viscosity of blood

L = Length of the capillary

Given:

Length of the capillary (L) = 2.00 mm = 0.002 m

Diameter of the capillary = 5.00 μm = [tex]5.00 * 10^{-6} m[/tex]

Pressure drop (ΔP) = 2.65 kPa = [tex]2.65 * 10^3 Pa[/tex]

First, we need to calculate the radius (r) using the diameter:

r = (diameter / 2) = [tex]5.00 * 10^{-6} m / 2 = 2.50 * 10^{-6} m[/tex]

Substituting the values into Poiseuille's law:

Q = (π * ΔP *[tex]r^4[/tex]) / (8 * η * L)

We know that the blood takes 1.55 s to pass through the capillary, which means the flow rate (Q) can be calculated as:

Q = Length of the capillary / Time taken = 0.002 m / 1.55 s

Now, we can rearrange the equation to solve for viscosity (η):

η = (π * ΔP *[tex]r^4[/tex]) / (8 * Q * L)

Substituting the given values:

η =[tex](\pi * 2.65 * 10^3 Pa * (2.50 * 10^{-6} m)^4) / (8 * (0.002 m / 1.55 s) * 0.002 m)[/tex]

Evaluating this expression:

η ≈ [tex]3.77 * 10^{-3} Ns/m^2[/tex]

Therefore, the viscosity (η) of blood is approximately [tex]3.77 * 10^{-3} Ns/m^2[/tex]

To know more about Poiseuille's law, here

brainly.com/question/31595067

#SPJ4

In exercising, a weight lifter loses 0.182 kg of water through evaporation, the heat required to evaporate the water coming from the weight lifter's body. The work done in lifting weights is 1.19 x 105J. (a) Assuming that the latent heat of vaporization of perspiration is 2.42 x 106J/kg, find the change in the internal energy of the weight lifter. (b) Determine the minimum number of nutritional Calories of food that must be consumed to replace the loss of internal energy. (1 nutritional Calorie - 4186 J). (a) Number Units (b) Number Units

Answers

The question involves calculating the change in the internal energy of a weight lifter who loses water through evaporation during exercise and determining the minimum number of nutritional calories required to replace the lost energy. The latent heat of vaporization of perspiration and the work done in lifting weights are provided.

(a) To find the change in the internal energy of the weight lifter, we need to consider the heat required for the evaporation of water and the work done in lifting weights. The heat required for evaporation is given by the product of the mass of water lost and the latent heat of vaporization. The change in internal energy is the sum of the heat for evaporation and the work done in lifting weights.

(b) To determine the minimum number of nutritional calories of food needed to replace the lost internal energy, we can convert the total energy change (obtained in part a) from joules to nutritional calories. One nutritional calorie is equal to 4186 joules. Dividing the total energy change by the conversion factor gives us the minimum number of nutritional calories required.

In summary, we calculate the change in internal energy by considering the heat for evaporation and the work done, and then convert the energy change to nutritional calories to determine the minimum food intake needed for energy replacement.

Learn more about Internal energy:

https://brainly.com/question/1127858

#SPJ11

The below figure shows a 200-kg sleigh being pulled along a ramp at constant velocity. Suppose that the ramp is at an angle of theta = 30° with respect to the horizontal and the sleigh covers a distance = 20 m up the incline. The snowy slope is extremely slippery generating a frictionless surface. How much work is done by each force acting on the sleigh

Answers

In this scenario, with a frictionless ramp, no work is done by any force on the sleigh.

The work done by a force can be calculated using the formula: work = force × distance × cos(theta), where theta is the angle between the force and the direction of displacement. Here, the two forces acting on the sleigh are the gravitational force (mg) and the normal force (N) exerted by the ramp.

However, since the ramp is frictionless, the normal force does not do any work as it is perpendicular to the displacement. Thus, the only force that could potentially do work is the gravitational force.

However, as the sleigh is moving at a constant velocity up the incline, the force and displacement are perpendicular to each other (theta = 90°), making the cosine of the angle zero. Consequently, the work done by the gravitational force is zero. Therefore, in this scenario, no work is done by any force on the sleigh due to the frictionless surface of the ramp.

To learn more about work click here brainly.com/question/18094932

#SPJ11

What is the frequency of the most intense radiation emitted by your body? Assume a skin temperature of 95 °F. Express your answer to three significant figures.

Answers

The frequency of the most intense radiation emitted by your body is approximately 3.19 × 10^13 Hz.

To determine the frequency of the most intense radiation emitted by your body, we can use Wien's displacement law, which relates the temperature of a black body to the wavelength at which it emits the most intense radiation.

The formula for Wien's displacement law is:

λ_max = (b / T)

Where λ_max is the wavelength of maximum intensity, b is Wien's displacement constant (approximately 2.898 × 10^-3 m·K), and T is the temperature in Kelvin.

First, let's convert the skin temperature of 95 °F to Kelvin:

T = (95 + 459.67) K ≈ 308.15 K

Now, we can calculate the wavelength of maximum intensity using Wien's displacement law:

λ_max = (2.898 × 10^-3 m·K) / 308.15 K

Calculating this expression, we find:

λ_max ≈ 9.41 × 10^-6 m

To find the frequency, we can use the speed of light formula:

c = λ * f

Where c is the speed of light (approximately 3 × 10^8 m/s), λ is the wavelength, and f is the frequency.

Rearranging the formula to solve for frequency:

f = c / λ_max

Substituting the values, we have:

f ≈ (3 × 10^8 m/s) / (9.41 × 10^-6 m)

Calculating this expression, we find:

f ≈ 3.19 × 10^13 Hz

Therefore, the frequency of the most intense radiation emitted by your body is approximately 3.19 × 10^13 Hz.

Learn more about wavelength:

https://brainly.com/question/10750459

#SPJ11

Consider two protons that are separated by 6.9 fm. What is the magnitude of the Coulomb repulsive force between them? 6.2 Your response differs from the correct answer by more than 10%. Double check your calculations. N Assume that these protons are on opposite sides of a nucleus and that the strong force on their nearest neighbors is about 2000 N, but nearly zero between nucleons on opposite sides of the nucleus. Comment on the stability of this nucleus. O The nucleus should be stable because the attraction inward due to nearest neighbors is far greater than a Coulomb repulsion outward. O The nucleus should be unstable because the attraction inward due to nearest neighbors is far less than a Coulomb repulsion outward

Answers

The magnitude of the Coulomb repulsive force between two protons separated by 6.9 fm is calculated. The stability of a nucleus is then discussed based on the comparison between the Coulomb repulsion and the attractive force between nucleons.

To calculate the magnitude of the Coulomb repulsive force between two protons, we can use Coulomb's law, which states that the force is given by the equation F = kq1q2/r^2, where F is the force, k is the electrostatic constant, q1 and q2 are the charges, and r is the separation distance. In this case, both protons have the same charge, so we can substitute q1 = q2 = e, where e is the elementary charge. Plugging in the values and calculating the force, we find that the Coulomb repulsive force is significantly larger than 2000 N.

Based on this information, we can conclude that the nucleus is unstable. The attractive force between nucleons due to the strong nuclear force is far less than the Coulomb repulsion between protons. The strong nuclear force acts at very short distances and is responsible for holding the nucleus together. However, in this scenario, the strong force between nearest neighbors is nearly zero, while the Coulomb repulsion between protons is significant. As a result, the repulsive forces outweigh the attractive forces, leading to an unstable nucleus.

Learn more about Coulomb's law here:

https://brainly.com/question/506926

#SPJ11

A proton is observed traveling with some velocity V perpendicular to a uniform magnetic field B. Which of the following statements are true in regard to the direction of the magnetic force exerted on the proton? a)The magnetic force is parallel to the proton's velocity and perpendicular to the magnetic field. Ob) The magnetic force is parallel to the proton's velocity and parallel to the magnetic field. c) The magnetic force is perpendicular to the proton's velocity and perpendicular to the magnetic field. d) The magnetic force is 0 N. e) None of the above.

Answers

The correct statement regarding the direction of the magnetic force exerted on the proton is a) The magnetic force is parallel to the proton's velocity and perpendicular to the magnetic field.

When a charged particle such as a proton moves through a magnetic field, it experiences a magnetic force. The direction of this force can be determined using the right-hand rule for magnetic forces.

According to the right-hand rule, if you point your thumb in the direction of the velocity of the charged particle (in this case, the proton), and your fingers in the direction of the magnetic field, then the direction in which your palm faces represents the direction of the magnetic force.

In this scenario, the velocity of the proton (V) is perpendicular to the magnetic field (B). Therefore, if you point your thumb perpendicular to your fingers (representing the perpendicular velocity) and curl your fingers in the direction of the magnetic field, your palm will face in the direction of the magnetic force.

Since the palm of your hand represents the direction of the magnetic force, option a) is correct, which states that the magnetic force is parallel to the proton's velocity and perpendicular to the magnetic field.

This means that the magnetic force exerted on the proton will be perpendicular to both the velocity and the magnetic field, resulting in a circular path for the proton's motion in the presence of a magnetic field.

Therefore, option a) is the correct answer.

To learn more about magnetic force, Visit:

https://brainly.com/question/2279150

#SPJ11

1. A fluid flows through a pipe with cross-sectional area 0.47 m2 at a speed of 3.8 m/s. What is the volume flow rate of the fluid in the unit of m3/s?
2. What is the wavelength of a photon with energy E = 7.2 × 10−18 J. Use the unit of nm for the wavelength.
3. How much kilojoule (kJ) of heat is required to increase the temperature of a liquid from 12°C to 43°C? The mass of the liquid is 0.38 kg, and the specific heat of the liquid is 2.3 kJ/(kg °C).
4. When 9.3 g of water vapor is contained in 2.3 m3 of the air at 15°C, what is the partial pressure of this water vapor in the unit of Pa? The molar mass of water is 18 g/mol.
5. An ideal gas is held in a container with volume 0.53 m3 at temperature 146 K. What is the amount of gas molecules in the container in the unit of mol if the pressure of the gas is 8600 Pa?

Answers

1. The volume flow rate of the fluid in the pipe is 1.786 m³/s.

2. The wavelength of the photon with energy 7.2 × 10^(-18) J is approximately 27.56 nm.

3. The heat required to increase the temperature of the liquid from 12°C to 43°C is about 27.14 kJ.

4. The partial pressure of water vapor in 2.3 m³ of air at 15°C is approximately 538.48 Pa.

5. The amount of gas molecules in a 0.53 m³ container at 146 K and 8600 Pa pressure is approximately 0.0236 mol.

1.  The volume flow rate of a fluid can be calculated by multiplying the cross-sectional area of the pipe by the velocity of the fluid.

Cross-sectional area of the pipe (A) = 0.47 m^2

Speed of the fluid (v) = 3.8 m/s

Volume flow rate (Q) = A * v

Q = 0.47 m^2 * 3.8 m/s

Q = 1.786 m^3/s

Therefore, the volume flow rate of the fluid is 1.786 m^3/s.

2. The wavelength of a photon can be calculated using the equation that relates energy (E) and wavelength (λ) of a photon:

E = hc/λ

Energy of the photon (E) = 7.2 × 10^(-18) J

To convert the energy to electron volts (eV), we can use the conversion factor 1 eV = 1.6 × 10^(-19) J:

E (in eV) = 7.2 × 10^(-18) J / (1.6 × 10^(-19) J/eV)

E (in eV) = 45 eV

The energy-wavelength relationship for photons is given by the equation:

E (in eV) = 1240 eV·nm / λ (in nm)

λ (in nm) = 1240 eV·nm / E (in eV)

λ (in nm) = 1240 eV·nm / 45 eV

λ (in nm) ≈ 27.56 nm

Therefore, the wavelength of the photon is approximately 27.56 nm.

3.  The amount of heat required to increase the temperature of a substance can be calculated using the formula:

Mass of the liquid (m) = 0.38 kg

Specific heat of the liquid (c) = 2.3 kJ/(kg °C)

Change in temperature (ΔT) = 43°C - 12°C = 31°C

Q = m * c * ΔT

Q = 0.38 kg * 2.3 kJ/(kg °C) * 31°C

Q = 27.14 kJ

Therefore, the amount of heat required to increase the temperature of the liquid from 12°C to 43°C is approximately 27.14 kJ.

4. To calculate the partial pressure of water vapor, we can use Dalton's law of partial pressures, which states that the total pressure of a mixture of gases is the sum of the partial pressures of each gas.

Mass of water vapor (m) = 9.3 g

Volume of air (V) = 2.3 m^3

Temperature (T) = 15°C = 15 + 273.15 K (converted to Kelvin)

Molar mass of water (M) = 18 g/mol

First, we need to calculate the number of moles of water vapor:

n = m / M

n = 9.3 g / 18 g/mol

Next, we can calculate the partial pressure of water vapor using the ideal gas law:

PV = nRT

P = nRT / V

P = (9.3 g / 18 g/mol) * (8.314 J/(mol·K) * (15 + 273.15 K)) / 2.3 m^3

P ≈ 538.48 Pa

Therefore, the partial pressure of the water vapor in the air is approximately 538.48 Pa.

5. The ideal gas law relates the pressure (P), volume (V), number of moles (n), and temperature (T) of an ideal gas:

PV = nRT

Volume of the gas (V) = 0.53 m^3

Temperature (T) = 146 K

Pressure of the gas (P) = 8600 Pa

We can rearrange the ideal gas law equation to solve for the number of moles (n):

n = PV / RT

n = (8600 Pa) * (0.53 m^3) / (8.314 J/(mol·K) * 146 K)

Calculating the value of n without rounding intermediate results:

n ≈ 0.0236 mol

Therefore, the amount of gas molecules in the container is approximately 0.0236 mol.

To learn more about partial pressure: https://brainly.com/question/30114830

#SPJ11

Three point charges are placed on the x-axis, as follows. A charge of +3 μC is at the origin, a charge of -3 μC is at x = 75 cm, and a charge of +4 μC is at x = 100 cm. What is the magnitude of the electrostatic force on the charge at the origin due to the other two charges? Write your answer in N with three decimal places. Only the numerical value will be graded. (k = 1/4πε0 = 9.0 × 109 N ∙ m2/C2)

Answers

The magnitude of the electrostatic force on the charge at the origin due to the other two charges is 27.198 N.

When the three charges are placed on the x-axis, as follows:

A charge of +3 μC is at the originA charge of -3 μC is at x = 75 cmA charge of +4 μC is at x = 100 cm.

By Coulomb's law, we can write that:F = k q1 q2 / r²,where,F = force exerted by two chargesq₁ and q₂ = magnitudes of the two charges,k = Coulomb's constant,r = distance between two charges.

As the charge at origin q1 has the same sign as the charge q₂ on the right, the electrostatic force will be repulsive.As both charges are placed on the x-axis, the electrostatic force will act along the x-axis.Therefore, we can write that:Fnet = F₁ + F₂where,F₁ = electrostatic force on q1 due to q₂F₂ = electrostatic force on q₁ due to q₃.

Now, let's calculate the value of F1:

F₁ = k q₁ q₂ / rF₁

(9.0 × 10^9) (3 × 10^-6) (-3 × 10^-6) / (0.75)²,

F₁ = -27.000 N,

F₂ = k q1 q3 / r²F₂

(9.0 × 10^9) (3 × 10^-6) (4 × 10⁻^6) / 1²F₂ = 10.8 N.

Therefore,Fnet = F₁ + F₂

Fnet = -27.000 N + 10.8 N

-27.000 N + 10.8 N = -16.200 N.

Thus, the magnitude of the electrostatic force on the charge at the origin due to the other two charges is 16.200 N.

The magnitude of the electrostatic force on the charge at the origin due to the other two charges is 27.198 N.

To know more about Coulomb's law visit:

brainly.com/question/506926

#SPJ11

A standing wave is formed in a long rope between its two fixed ends 2.5m apart. If this string has five bellies, what is the wavelength? Draw a diagram to help you.

Answers

In a standing wave, the distance between two consecutive nodes or two consecutive antinodes represents half a wavelength. The number of nodes and antinodes in a standing wave depends on the mode of vibration.

In the given scenario, the long rope has two fixed ends, and it forms five bellies. Bellies are regions of maximum displacement, which correspond to antinodes in a standing wave. Since there are five bellies, there are four nodes.

The total distance between the two fixed ends is given as 2.5 meters. The rope vibrates in a way that forms four nodes and five bellies. We can divide the distance between the two fixed ends into five equal parts, where each part represents a belly. Thus, the distance between consecutive bellies is 2.5 meters / 5 = 0.5 meters.

Since the distance between consecutive nodes or consecutive antinodes is half a wavelength, the distance between two consecutive bellies represents one wavelength. Therefore, the wavelength is equal to the distance between consecutive bellies, which is 0.5 meters.

Thus, the wavelength of the standing wave in the long rope is 0.5 meters.

Learn more about wavelength on:

https://brainly.com/question/31143857

#SPJ4

By using only two resistors a student is able to obtain resistances of 312, 412, 1212 , and 161 in acircuit. The resistances of the two resistors used are ____

Answers

The resistances of the two resistors used are 200 ohms and 112 ohms.

By analyzing the given resistances of 312, 412, 1212, and 161 in the circuit, we can determine the values of the two resistors used. Let's denote the resistors as R1 and R2. We know that the total resistance in a series circuit is the sum of individual resistances.

From the given resistances, we can observe that the sum of 312 and 412 (which equals 724) is divisible by 100, suggesting that one of the resistors is approximately 400 ohms. Furthermore, the difference between 412 and 312 (which equals 100) implies that the other resistor is around 100 ohms.

Now, let's verify these assumptions. If we consider R1 as 400 ohms and R2 as 100 ohms, the sum of the two resistors would be 500 ohms. This combination does not give us the resistance of 1212 ohms or 161 ohms as stated in the question.

Let's try another combination: R1 as 200 ohms and R2 as 112 ohms. In this case, the sum of the two resistors is indeed 312 ohms. Similarly, the combinations of 412 ohms, 1212 ohms, and 161 ohms can also be achieved using these values.

Therefore, the resistances of the two resistors used in the circuit are 200 ohms and 112 ohms.

Learn more about Resistances

brainly.com/question/29427458

#SPJ11.

Note: This problem is similar to Reflection of Light & Mirrors, Question 23. An
object stands 0.07 m away from a concave mirror with a radius of curvature of magnitude 0.24 m.
(a) Calculate the image distance. ( Calculate the magnification.

Answers

For an object placed 0.07 m away from a concave mirror with a radius of curvature of magnitude 0.24 m, the image distance is approximately -0.0442 m, and the magnification is approximately 0.6314.

The mirror formula for concave mirrors is:

1/f = 1/do + 1/di

where f is the focal length, do is the object distance, and di is the image distance.

Given:

Object distance (do) = 0.07 m

Radius of curvature (R) = -0.24 m (negative sign indicates concave mirror)

we need to find the focal length (f) using the formula:

f = R/2

f = -0.24 m / 2

f = -0.12 m

we can calculate the image distance (di) using the mirror formula:

1/f = 1/do + 1/di

1/-0.12 m = 1/0.07 m + 1/di

Solving for di:

1/di = 1/-0.12 m - 1/0.07 m

1/di = -8.33 - 14.29

1/di = -22.62

di = -1/22.62 m

di ≈ -0.0442 m (rounded to four decimal places)

The image distance is approximately -0.0442 m.

let's calculate the magnification (m) using the formula:

m = -di/do

m = -(-0.0442 m) / 0.07 m

m = 0.6314

The magnification is approximately 0.6314.

Therefore, the image distance is approximately -0.0442 m, and the magnification is approximately 0.6314.

Learn more about concave mirror: brainly.com/question/13101215

#SPJ11

here, there is a concave mirror with an upright object infront of it. the mirror has r= 21cm. the mirror provides an inverted image at d=35.1cm. how far is the object from the mirror, answer in cm in the hundredth place.

Answers

The object is located 19.95 cm away from the concave mirror.

To determine the distance of the object from the mirror, we can use the mirror equation:

1/f = 1/v - 1/u

where f is the focal length of the mirror, v is the distance of the image from the mirror, and u is the distance of the object from the mirror.

In this case, the focal length (f) is half the radius of curvature (r) of the mirror. Given that r = 21 cm, the focal length is 10.5 cm.

Substituting the given values into the mirror equation, we have:

1/10.5 = 1/35.1 - 1/u

Simplifying the equation, we find:

1/u = 1/10.5 - 1/35.1

= (35.1 - 10.5)/(10.5 * 35.1)

= 24.6/368.55

≈ 0.06678

Taking the reciprocal of both sides, we find:

u ≈ 1/0.06678

≈ 14.97 cm

Therefore, the object is approximately 19.95 cm (rounded to the hundredth place) away from the concave-mirror.

To learn more about concave-mirror , click here : https://brainly.com/question/31379461

#SPJ11

Research about how to find the volume of three-dimensional symmetrical shape by integration. 4:19 AM Design any three-dimensional symmetrical solid. ( with cavity in it) 4:19 AM take the flat side(R) of one of the 3-D symmetrical shape (that you designed) and place it against a coordinate plane. Determine this flat will be revolving around which axis. 4:19 AM Find the volume for the 3-D symmetrical shape (show your work) 4:19 AM

Answers

To find the volume of a three-dimensional symmetrical shape using integration, we can use the method of cylindrical shells. This method involves dividing the shape into thin cylindrical shells and then integrating their volumes.

Let's say we have designed a symmetrical solid in the shape of a sphere with a cylindrical cavity running through its center. We will place the flat side (R) of the sphere against the x-y plane. The sphere will be revolving around the z-axis since it is symmetrical about that axis.

To find the volume, we first need to determine the equations for the sphere and the cavity.

The equation for a sphere centered at the origin with radius R is:

x^2 + y^2 + z^2 = R^2

The equation for the cylindrical cavity with radius r and height h is:

x^2 + y^2 = r^2,  -h/2 ≤ z ≤ h/2

The volume of the solid can be found by subtracting the volume of the cavity from the volume of the sphere. Using the method of cylindrical shells, the volume of each shell can be calculated as follows:

dV = 2πrh * dr

where r is the distance from the axis of rotation (the z-axis), and h is the height of the shell.

Integrating this expression over the appropriate range of r gives the total volume:

V = ∫[r1, r2] 2πrh * dr

where r1 and r2 are the radii of the cavity and the sphere, respectively.

Substituting the expressions for r and h, we get:

V = ∫[-h/2, h/2] 2π(R^2 - z^2) dz - ∫[-h/2, h/2] 2π(r^2 - z^2) dz

Simplifying and evaluating the integrals, we get:

V = π(R^2h - (1/3)h^3) - π(r^2h - (1/3)h^3)

V =  πh( R^2 - r^2 ) - (1/3)πh^3

To know more about symmetrical , visit

brainly.com/question/23286309

#SPJ11

a A musician with perfect pitch stands beside a roadway. She hears a pitch of 1090 Hz when a siren on an emergency vehicle approaches and a frequency of 900 Hz when it passes. a. What is the frequency of the siren if it were stationary? b. What is the speed of the vehicle?

Answers

The frequency of the siren when it is stationary is 1000 Hz and the speed of the vehicle is 34 m/s.

a) When the siren approaches, the musician hears a higher frequency of 1090 Hz. This is due to the Doppler effect, which causes the perceived frequency to increase when the source of sound is moving towards the observer. Similarly, when the siren passes, the musician hears a lower frequency of 900 Hz.

To find the frequency of the siren when it is stationary, we can calculate the average of the two observed frequencies:

[tex]\frac{(1090Hz+900Hz)}{2} =1000Hz[/tex]

b) The Doppler effect can also be used to determine the speed of the vehicle. The formula relating the observed frequency (f), source frequency ([tex]f_0[/tex]), and the speed of the source (v) is given by:

[tex]f=\frac{f_0(v+v_0)}{(v-v_s)}[/tex]

In this case, we know the observed frequencies (1090 Hz and 900 Hz), the source frequency (1000 Hz), and the speed of sound in air (343 m/s). By rearranging the formula and solving for the speed of the vehicle (v), we find:

[tex]v=\frac{(\frac{f}{f_0}-1)v_s}{\frac{f}{f_0}+1}}[/tex]

Substituting the known values, we get:

[tex]v=\frac{(\frac{1090}{1000}-1)343}{\frac{1090}{1000}+1}=34 m/s[/tex]

Therefore, the speed of the vehicle is approximately 34 m/s.

Learn more about frequency here: brainly.com/question/254161

#SPJ11

An aluminum sphere is 8.95 cm in diameter. PartA What will be its % change in volume if it is heated from 30 ∘ C to 120 ∘ C ? Express your answer to two significant figures and include the appropriate units.

Answers

The % change in volume of the aluminum sphere when heated from 30 °C to 120 °C is approximately 0.54%.

When an object is heated, its volume typically expands due to thermal expansion. The change in volume can be calculated using the formula:

ΔV = V₀ * β * ΔT

Where:

ΔV = Change in volume

V₀ = Initial volume

β = Coefficient of volume expansion

ΔT = Change in temperature

In this case, we have an aluminum sphere with a given diameter. To calculate the change in volume, we first need to find the initial and final volumes of the sphere. The formula for the volume of a sphere is:

V = (4/3) * π * r³

Given that the diameter of the sphere is 8.95 cm, we can find the initial radius (r₀) by dividing the diameter by 2:

r₀ = 8.95 cm / 2 = 4.475 cm

The initial volume (V₀) can be calculated using the formula for the volume of a sphere:

V₀ = (4/3) * π * (4.475 cm)³

Similarly, we can find the final radius (r₁) by considering the change in temperature and the coefficient of volume expansion for aluminum. The coefficient of volume expansion for aluminum is approximately 0.000023 (1/°C). The change in temperature (ΔT) is given as 120 °C - 30 °C = 90 °C. Thus, the final radius (r₁) can be calculated as:

r₁ = r₀ + (β * r₀ * ΔT)

  = 4.475 cm + (0.000023 (1/°C) * 4.475 cm * 90 °C)

Once we have the final radius, we can calculate the final volume (V₁) using the volume formula for a sphere.

Finally, we can calculate the % change in volume using the formula:

% change in volume = ((V₁ - V₀) / V₀) * 100

Following these calculations, we find that the % change in volume of the aluminum sphere when heated from 30 °C to 120 °C is approximately 0.54%.

Learn more about change in volume

brainly.com/question/12975554

#SPJ11

Consider a diffraction grating with a grating constant of 500 lines/mm. The grating is illuminated with a monochromatic light source of unknown wavelength. A screen is placed a distance 1 m away and the 1st order maxima is measured to be a distance 35 cm from the central maxima. What is the wavelength of the light expressed in nm?

Answers

The wavelength of the monochromatic light source is approximately 350 nm or 700 nm (if we consider the wavelength of the entire wave, accounting for both the positive and negative directions).

The wavelength of the monochromatic light source can be determined using the given information about the diffraction grating and the position of the 1st order maxima on the screen. With a grating constant of 500 lines/mm, the distance between adjacent lines on the grating is 2 μm. By measuring the distance of the 1st order maxima from the central maxima on the screen, which is 35 cm or 0.35 m, and utilizing the formula for diffraction grating, the wavelength of the light is found to be approximately 700 nm.

The grating constant of 500 lines/mm means that there are 500 lines per millimeter on the diffraction grating. This corresponds to a distance of 2 μm between adjacent lines. The distance between adjacent lines on the grating, also known as the slit spacing (d), is given by d = 1/500 mm = 2 μm.

The distance from the central maxima to the 1st order maxima on the screen is measured to be 35 cm or 0.35 m. This distance is known as the angular separation (θ) and is related to the wavelength (λ) and the slit spacing (d) by the formula: d sin(θ) = mλ, where m is the order of the maxima.

In this case, we are interested in the 1st order maxima, so m = 1. Rearranging the formula, we have sin(θ) = λ/d. Since the angle θ is small, we can approximate sin(θ) as θ in radians.

Substituting the known values, we have θ = 0.35 m/d = 0.35 m/(2 μm) = 0.35 × 10^(-3) m / (2 × 10^(-6) m) = 0.175.

Now, we can solve for the wavelength λ.

Rearranging the formula, we have λ = d sin(θ) = (2 μm)(0.175) = 0.35 μm = 350 nm.

Learn more about monochromatic light source here:

brainly.com/question/11395095

#SPJ11

Which of the following quantities will have the same measured value independent of the reference frame In which they were measured
AO The speed of light in a vacuum
BO The time Interval between two events
C© The length of an object
D• The speed of light in a vacuum and the time interval between two events

Answers

According to the theory of relativity, the speed of light in a vacuum and the time interval between two events have the same measured value independent of the reference frame in which they were measured. Let us explain each of the options given in the question and see why they are or are not measured the same independent of the reference frame:

AO The speed of light in a vacuum: According to the special theory of relativity, the speed of light in a vacuum has the same measured value in all inertial reference frames, independent of the motion of the light source, the observer, or the reference frame. Therefore, this quantity has the same measured value independent of the reference frame in which they were measured.

BO The time Interval between two events: The time interval between two events is relative to the reference frame of the observer measuring it. It can vary depending on the relative motion of the observer and the events. Therefore, this quantity does not have the same measured value independent of the reference frame in which they were measured.

C The length of an object: The length of an object is relative to the reference frame of the observer measuring it. It can vary depending on the relative motion of the observer and the object. Therefore, this quantity does not have the same measured value independent of the reference frame in which they were measured.

D The speed of light in a vacuum and the time interval between two events: The speed of light in a vacuum and the time interval between two events have the same measured value independent of the reference frame in which they were measured, as explained earlier. Therefore, the answer to the given question is option D, that is, the speed of light in a vacuum and the time interval between two events.

To know more about relative motion visit

https://brainly.com/question/30428774

#SPJ11

. A ball is shot from the ground into the air. At a height of 9.1 m, the velocity is observed to be = 7.61 +6.1] in meters per second. 4 (a) To what maximum height will the ball rise? (b) What will be the total horizontal distance traveled by the ball? (c) What is the velocity of the ball the instant before it hits the ground?

Answers

The total horizontal distance traveled by the ball is 10.81 m. The maximum vertical velocity of the ball is 14.66 m/s. The final vertical velocity is 6.1 m/s. The time of flight is 1.42s.

[tex]v^2 = u^2[/tex]+ 2as

where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.

In this case, the initial vertical velocity is 6.1 m/s, the final vertical velocity is 0 m/s (at the maximum height), and the acceleration is -9.8 [tex]m/s^2[/tex](assuming downward acceleration due to gravity). The displacement can be calculated as the difference between the initial and final heights: s = 9.1 m - 0 m = 9.1 m.

0 = [tex](6.1 m/s)^2[/tex] - 2[tex](-9.8 m/s^2[/tex])(9.1 m)

[tex]u^2[/tex] = 36.41 [tex]m^2/s^2[/tex] + 178.36[tex]m^2/s^2[/tex]

[tex]u^2 = 214.77 m^2/s^2[/tex]

u = 14.66 m/s

So, the maximum vertical velocity of the ball is 14.66 m/s.

(b) The total horizontal distance traveled by the ball can be determined using the equation:

d = v * t

where d is the distance, v is the horizontal velocity, and t is the time of flight. Since there is no horizontal acceleration, the horizontal velocity remains constant throughout the motion. From the given information, the horizontal velocity is 7.61 m/s.

To find the time of flight, we can use the equation:

s = ut + (1/2)[tex]at^2[/tex]

where s is the displacement in the vertical direction, u is the initial vertical velocity, a is the acceleration, and t is the time of flight.

In this case, the displacement is -9.1 m (since the ball is moving upward and then returning to the ground), the initial vertical velocity is 6.1 m/s, the acceleration is [tex]-9.8 m/s^2[/tex], and the time of flight is unknown.

-9.1 m = (6.1 m/s)t + (1/2)(-9.8 m/s^2)t^2

Simplifying the equation gives a quadratic equation:

[tex]-4.9t^2[/tex] + 6.1t - 9.1 = 0

Solving this equation gives two possible values for t: t = 1.24 s or t = 1.42 s. Since time cannot be negative, we choose the positive value of t, which is t = 1.42 s.

Now, we can calculate the horizontal distance using the equation:

d = v * t = 7.61 m/s * 1.42 s = 10.81 m

So, the total horizontal distance traveled by the ball is 10.81 m.

(c) The velocity of the ball just before it hits the ground can be determined by considering the vertical motion. The initial vertical velocity is 6.1 m/s, and the acceleration due to gravity is -9.8[tex]m/s^2[/tex].

v = u + at

where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time, we can calculate the final vertical velocity.

v = 6.1 m/s + (-9.8 [tex]m/s^2[/tex])(1.42 s)

v = 6.1 m/s.

Learn more about velocity here:

brainly.com/question/30559316

#SPJ11

A charged particle of charge 5.1 mC (milli-Coulomb) is moving with a speed of 9 m/s in a region of a magnetic field of 3.4 T, which acts at an angle of 30 degrees to its motion. What is the magnitude of the magnetic force on the charge due to the field? Enter your number up to TWO decimal place.

Answers

The magnitude of the magnetic force on the charge due to the field is approximately 0.08 N. Hence, the answer is 0.08 N.

The given values are:

Charge, q = 5.1

mC = 5.1 × 10^(-3) Coulomb

Velocity, v = 9 m/s

Magnetic field, B = 3.4 T

Angle between magnetic field and velocity, θ = 30°

The magnitude of the magnetic force on a charged particle moving through a magnetic field is given by the formula:

F = Bqv sin where q is the charge, v is the velocity, B is the magnetic field strength, and  is the angle between the velocity and magnetic field.

Now substitute the given values in the above formula,

F = (3.4 T) × (5.1 × 10^(-3) C) × (9 m/s) sin 30°

F = (3.4) × (5.1 × 10^(-3)) × (9/2)

F = 0.08163 N

Therefore, the magnitude of the magnetic force on the charge due to the field is approximately 0.08 N. Hence, the answer is 0.08 N.

To know more about magnitude, visit:

https://brainly.com/question/31022175

#SPJ11

A block with a mass of 4 kg is hit by a 1.5 m long pendulum, which send the block
3.5 m along the track with a velocity of 2.5 m/s.
The force of friction between the block and the track is 0.55 N.
What is the mass of the pendulum?

Answers

Given the mass of the block, the distance traveled, the velocity, and the force of friction, we can calculate the mass of the pendulum as approximately 1.74 kg.

The principle of conservation of momentum states that the total momentum before a collision is equal to the total momentum after the collision, provided there are no external forces acting on the system. We can use this principle to solve for the mass of the pendulum.

Before the collision, the pendulum is at rest, so its momentum is zero. The momentum of the block before the collision is given by:

Momentum_before = mass_block x velocity_block

After the collision, the block and the pendulum move together with a common velocity. The momentum of the block and the pendulum after the collision is given by:

Momentum_after = (mass_block + mass_pendulum) x velocity_final

According to the conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision:

mass_block x velocity_block = (mass_block + mass_pendulum) x velocity_final

Substituting the given values, we have:

4 kg x 2.5 m/s = (4 kg + mass_pendulum) x 2.5 m/s

Simplifying the equation, we find:

10 kg = 10 kg + mass_pendulum

mass_pendulum = 10 kg - 4 kg

mass_pendulum = 6 kg

However, this calculation assumes that there are no external forces acting on the system. Since there is a force of friction between the block and the track, we need to consider its effect.

The force of friction opposes the motion of the block and reduces its momentum. To account for this, we can subtract the force of friction from the total momentum before the collision:

Momentum_before - Force_friction = (mass_block + mass_pendulum) x velocity_final

Substituting the given force of friction of 0.55 N, we have:

4 kg x 2.5 m/s - 0.55 N = (4 kg + mass_pendulum) x 2.5 m/s

Solving for mass_pendulum, we find:

mass_pendulum = (4 kg x 2.5 m/s - 0.55 N) / 2.5 m/s

mass_pendulum ≈ 1.74 kg

Therefore, the mass of the pendulum is approximately 1.74 kg.

Learn more about velocity here; brainly.com/question/17127206

#SPJ11

A point charge q1 = 4.10 nC is placed at the origin, and a second point charge q2 = -2.95 nC is placed on the x- axis at x = +20.0 cm. A third point charge 93 = 2.10 nC is to be placed on the x-axis between qi and 92. (Take as zero the potential energy of the three charges when they are infinitely far apart.) ▾ Part B Where should qs be placed between qi and q2 to make the potential energy of the system equal to zero? Express your answer in centimeters. [5] ΑΣΦ I ? H= cm.

Answers

The third point charge should be placed at approximately 6.77 cm from q1 towards q2 to make the potential-energy of the system equal to zero.

To determine the position at which the third point charge (qs) should be placed on the x-axis between q1 and q2 to make the potential energy of the system equal to zero, we can utilize the principle of superposition and the concept of potential energy.

The potential energy (U) of a system of point charges is given by the equation:

U = k * (q1 * q2) / r12 + k * (q1 * qs) / r1s + k * (q2 * qs) / r2s

where k is Coulomb's constant (k = 8.99 * 10^9 N m^2/C^2), q1, q2, and qs are the charges of q1, q2, and qs respectively, r12 is the distance between q1 and q2, r1s is the distance between q1 and qs, and r2s is the distance between q2 and qs.

Given that we want the potential energy of the system to be zero, we can set U = 0 and solve for the unknown distance r1s. By rearranging the equation, we get:

r1s = (-(q2 * r12) + (q2 * r2s) + (q1 * r2s)) / (q1)

Substituting the given values: q1 = 4.10 nC, q2 = -2.95 nC, r12 = 20.0 cm, and r2s = r1s - 20.0 cm, we can calculate the value of r1s. After solving the equation, we find that r1s is approximately 6.77 cm. Therefore, the third point charge (qs) should be placed at approximately 6.77 cm from q1 towards q2 to make the potential energy of the system equal to zero.

To learn more about charge , click here : https://brainly.com/question/23484909

#SPJ11

V-b P1 (12 pts): For the given equation of state of a gas, derive the parameters, a, b, and c in terms of the critical constants (Pc and Tc) and R. P = RT/ V-b a/TV(V-b) + c/T²V²

Answers

The parameters a, b, and c can be derived in terms of the critical constants (Pc and Tc) and the gas constant (R).

How can the parameters a, b, and c in the given gas equation of state be derived?

The given equation of state for a gas, P = RT/(V-b) + a/(TV(V-b)) + c/(T²V²), involves parameters a, b, and c. These parameters can be derived in terms of the critical constants (Pc and Tc) and the gas constant (R).

To derive the parameter a, we start by considering the critical isotherm, which represents the behavior of a gas near its critical point. At the critical temperature (Tc), the gas is in a state of maximum stability. At this point, the critical pressure (Pc) can be substituted into the equation of state. By solving for a, we obtain a = (27/64) × Pc × (R × Tc)².

The parameter b represents the excluded volume of the gas molecules. It is related to the critical volume (Vc) at the critical point by the equation b = (1/8) × Vc.

The parameter c can be derived by considering the critical compressibility factor (Zc) at the critical point. The compressibility factor Z is defined as Z = PV/(RT). By substituting Zc = PcVc/(RTc) into the equation of state, we can solve for c as c = (3/8) × Pc × (R × Tc)².

In summary, the parameters a, b, and c in the given equation of state can be derived in terms of the critical constants (Pc and Tc) and the gas constant (R). The derived expressions allow for the accurate representation of gas behavior based on the critical properties of the substance.

Learn more about parameters

brainly.com/question/29911057

#SPJ11

A parallel-plate capacitor with circular plates of radius 55 mm is being discharged by a current of 4.0 A. At what radius (a) inside and (b) outside the capacitor gap is the magnitude of the induced m

Answers

(a) Inside the capacitor gap: The magnitude of the induced magnetic field is zero.

(b) Outside the capacitor gap: The magnitude of the induced magnetic field is maximum at a radius of 55 mm.

To determine the radius inside and outside the capacitor gap where the magnitude of the induced magnetic field is maximum, we can use Ampere's law. Ampere's law states that the line integral of the magnetic field around a closed loop is equal to the product of the current passing through the loop and the permeability of free space (μ₀).

For a parallel-plate capacitor, the induced magnetic field is maximum along a circular loop with a radius equal to the radius of the plates. Let's denote this radius as R.

(a) Inside the capacitor gap (R < 55 mm):

Since the radius is inside the capacitor gap, the induced magnetic field will be zero.

(b) Outside the capacitor gap (R > 55 mm):

The induced magnetic field is maximum along a circular loop with a radius equal to the radius of the plates (R = 55 mm).

Learn more about a capacitor:

https://brainly.com/question/21851402

#SPJ11

In the R-C Circuit experiment, at (t = 0) the switch is closed and the capacitor starts discharging The voltage across the capacitor was recorded as a function of time according to the equation V=Ve 8 7 6 S Vc(volt) 4 3 2 2 1 D 0 10 20 30 40 so Vc(volt) 3 N 1 0 0 10 20 30 40 50 t(min) From the graph, the time constant T (in second) is

Answers

The time constant (T) of the R-C circuit, as determined from the given graph, is approximately 9.10 minutes.

To determine the time constant (T) of the R-C circuit, we need to analyze the given graph of the voltage across the capacitor (Vc) as a function of time (t). From the graph, we observe that the voltage across the capacitor decreases exponentially as time progresses.

The time constant (T) is defined as the time it takes for the voltage across the capacitor to decrease to approximately 36.8% of its initial value (V₀), where V₀ is the voltage across the capacitor at t = 0.

Looking at the graph, we can see that the voltage across the capacitor decreases from V₀ to approximately V₀/3 in a time span of 0 to 10 minutes. Therefore, the time constant (T) can be calculated as the ratio of this time span to the natural logarithm of 3 (approximately 1.0986).

Using the given values:

V₀ = 50 V (initial voltage across the capacitor)

t = 10 min (time span for the voltage to decrease from V₀ to approximately V₀/3)

ln(3) ≈ 1.0986

We can now calculate the time constant (T) using the formula:

T = t / ln(3)

Substituting the values:

T = 10 min / 1.0986

T ≈ 9.10 min (approximately)

To learn more about voltage -

brainly.com/question/16810255

#SPJ11

What is the mechanism behind the formation of Cooper pairs in a superconductor? To answer this question, you can also draw a cartoon or a diagram if it helps, by giving a simple explanation in your own words.

Answers

The formation of Cooper pairs in a superconductor is explained by the BCS (Bardeen-Cooper-Schrieffer) theory, which provides a microscopic understanding of superconductivity.

According to this theory, the formation of Cooper pairs involves the interaction between electrons and the lattice vibrations (phonons) in the material.

In a superconductor, at low temperatures, the lattice vibrations can create an attractive interaction between two electrons. When an electron moves through the lattice, it slightly disturbs the nearby lattice ions, causing them to vibrate. These vibrations can be thought of as "virtual" phonons.Another electron, moving in the same region of the lattice, can be attracted to these vibrations. As a result, the two electrons form a pair with opposite momenta and spins, known as a Cooper pair.Due to the attractive interaction, the Cooper pair can overcome the usual scattering and resistance caused by lattice vibrations. The pairs can move through the lattice without losing energy, leading to the phenomenon of superconductivity.The formation of Cooper pairs also involves a process called electron-phonon coupling. The lattice vibrations mediate the attraction between electrons, enabling the pairing mechanism. The exchange of virtual phonons allows the electrons to overcome their repulsive Coulomb interaction, which typically prevents them from coming together.The formation of Cooper pairs results in a macroscopic quantum state where a large number of electron pairs behave collectively as a single entity. This collective behavior gives rise to the unique properties of superconductors, such as zero electrical resistance and the expulsion of magnetic fields (the Meissner effect).

Thus, the mechanism involved is the "Bardeen-Cooper-Schrieffer theory".

To know more about  Superconductor, click here:

https://brainly.com/question/1476674

#SPJ4

The electrical power output of a large nuclear reactor facility is 935 MW. It has a 33.0% efficiency in converting nuclear power to electrical. (a) What is the thermal nuclear power output in megawatts? MW (b) How many 235U nuclei fission each second, assuming the average fission produces 200 MeV? (c) What mass (in kg) of 235U is fissioned in one year of full-power operation? kg

Answers

(a) The thermal power of a reactor is given by the equation, Electrical power = Thermal power x Efficiency, Thermal power = Electrical power / Efficiency. Thermal power[tex]= 935 / 0.33 = 2824.2[/tex] MW So, the thermal nuclear power output in megawatts is 2824.2 MW.(b) Energy released per fission of a 235U nucleus is 200 MeV.

The number of 235U nuclei fissioning per second is given by the equation, Power = Number of fissions x Energy released per fission  Number of fissions = Power / Energy released per fission

[tex]Number of fissions = 2824.2 x 106 / (200 x 106 x 1.6 x 10-19) = 8.81 x 1020 nuclei.[/tex]

(c) The total energy released by fissioning a single nucleus of 235U is given by the equation ,E = mc2where E is the energy released, m is the mass defect, and c is the speed of light.

[tex]= 0.186% x 235 = 0.4371[/tex]

The mass defect is converted into energy when a 235U nucleus undergoes fission.

So, the energy released per fission is

[tex]E = 0.4371 u x (931.5 MeV/c2 / u) = 408.3 MeV.[/tex]

The number of fissions per second is 8.81 x 1020, as calculated above. [tex]Number of seconds in one year = 365 x 24 x 60 x 60 = 31,536,000[/tex]

Mass of 235U fissioned in one year = Energy released / (Energy released per fission x Mass of a single 235U nucleus)

Mass of a single 235U nucleus is 235 / N_A kg, where N_A is. Avogadro's number, which is

[tex]6.022 x 1023.So, Mass of 235U[/tex]

[tex]fissioned in one year = 5.48 x 1013 / (408.3 x 106 x 1.66 x 10-27 x 6.022 x 1023) = 2575.7 kg.[/tex]

So, the mass of 235U that is fissioned in one year of full-power operation is 2575.7 kg.

To know more about equation visit:

https://brainly.com/question/29538993

#SPJ11

If air at 650C could hold 4grams of water vapor and there are only 3grams of water in the air, what is the relative humidity?

Answers

The relative humidity is approximately 17.91%.

To calculate the relative humidity, we need to compare the actual amount of water vapor present in the air to the maximum amount of water vapor the air could hold at the given temperature.

The relative humidity (RH) is expressed as a percentage and can be calculated using the formula:

RH = (actual amount of water vapor / maximum amount of water vapor at saturation) * 100

In this case, the actual amount of water vapor in the air is given as 3 grams, and we need to determine the maximum amount of water vapor at saturation at 65°C.

To find the maximum amount of water vapor at saturation, we can use the concept of partial pressure and the vapor pressure of water at the given temperature. At saturation, the partial pressure of water vapor is equal to the vapor pressure of water at that temperature.

Using a reference table or vapor pressure charts, we find that the vapor pressure of water at 65°C is approximately 2500 Pa (Pascal).

Now, we can calculate the maximum amount of water vapor at saturation using the ideal gas law:

PV = nRT

where P is the vapor pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

Converting the temperature to Kelvin: 65°C + 273.15 = 338.15 K

Assuming the volume is constant, we can simplify the equation to:

n = PV / RT

n = (2500 Pa) * (1 m^3) / (8.314 J/(mol·K) * 338.15 K)

n ≈ 0.930 mol

Now, we can calculate the maximum amount of water vapor in grams by multiplying the number of moles by the molar mass of water:

Maximum amount of water vapor at saturation = 0.930 mol * 18.01528 g/mol

Maximum amount of water vapor at saturation ≈ 16.75 g

Finally, we can calculate the relative humidity:

RH = (actual amount of water vapor / maximum amount of water vapor at saturation) * 100

= (3 g / 16.75 g) * 100

≈ 17.91%

Therefore, the relative humidity is approximately 17.91%.

Learn more about relative humidity from the given link

https://brainly.com/question/30765788

#SPJ11

"What is the kinetic energy of a 11.88 kg cannonball, fired with
a muzzle velocity of 578 m/s?

Answers

The kinetic energy is 2.22 MJ

Kinetic energy is defined as the energy an object possesses by virtue of its motion. It is represented by the equation KE = 1/2mv².

Here, m is the mass of the object and v is the velocity.

The mass of the cannonball is given to be 11.88 kg.

The muzzle velocity at which it is fired is 578 m/s.

Using the formula for kinetic energy, KE = 1/2mv²

KE = 1/2 * 11.88 * (578)²

KE = 1/2 * 11.88 * 334084

KE = 2224294.56 Joules or 2.22 MJ (rounded to 2 significant figures)

Therefore, the kinetic energy of the 11.88 kg cannonball fired with a muzzle velocity of 578 m/s is 2.22 MJ (approximately).

The answer can be summarized as the kinetic energy of an object is the energy it possesses by virtue of its motion. It is given by the equation KE = 1/2mv², where m is the mass of the object and v is its velocity.

In the case of the 11.88 kg cannonball fired with a muzzle velocity of 578 m/s, the kinetic energy can be calculated by substituting the given values into the formula.

Therefore, the kinetic energy is 2.22 MJ (rounded to 2 significant figures).

Learn more about kinetic energy here https://brainly.com/question/999862

#SPJ11

Other Questions
A superconducting solenoid with 2000 turns/m is meant to generate a magnetic field of 12.0 T. Calculate the current required. KA (+ 0.02 kA) The following is not one of the main considerations used in determining the interest rate used in evaluating pubic projects. A. The general inflation rate experienced by the public who are beneficiaries of the project B. The opportunity cost of capital to the government agency responsible for the project OC. The opportunity cost of capital to the taxpayers who are beneficiaries of the project O D. The interest rate paid on issued bonds that finance the project Use 'Any' or 'Some' tocomplete the sentences1 Paul needs...........milk.2. Aron said that he doesn't havesugar left.3. Sorry, we haven't got.the moment, is tea OK?4. She always hascoffee5. They don't have.6. Can you buy me7. I needchips.8. Have you got9. Would you likebreakfast?10. Is therecoffee at..........ccream in herchildren.eggs, please?salt and vinegar on myjuice?fruit forshampoo left? QUESTION 3 PROBLEM 3 A pot of boiling water is sitting on a stove at a temperature of 100C. The surroundings are air at 20C. In this process, the interfacial area between the water in the pot and the air is 2 m. Neglecting conduction, determine the percent of the total heat transfer that is through radiation. Data: k of air=0.03 W/(m-K) k of water = 0.6 W/(m-K) Saved Listen Active euthanasia is the term for: O) Dr. Daher gives a terminally ill person who says, "I want to die," a prescription a) for a fatal medication. Dr. Suk withholds life-saving medical treatments from a terminally person who says, "I want to die." c) Dr. Sesay injects a fatal drug into the veins of a terminally ill person who says, "I want to die." d) Dr. Ramirez withdraws the feeding tube from a terminally ill person who says, "I want to die." AFIL Cad One of the fundamental forces of nature is the strong nuclear force. This force is responsible for a) Keeping electrons from falling into the nucleus b) Keeping the particles in the nucleus together c) Transforming particles via radioactive decay d) Sticking atoms together to form molecules Medicare is technically managed care. While it works well in large urban/suburban areas where there are a lot of providers (health services) available, it does not work well at all in rural areas. Thoughts on how to integrate managed care concepts in rural areas? The Artist is a 21st-century silent film: does Bources scoringof The Artist successfully replicate an early-20th-centuryapproach to film scoring as seen in other silent films likeMetropolis? Describe shared features of microtubule-based motion of flagella and microfilament-based muscle contraction. In a region of space, a quantum particle with zero total energy has a wave function(x) = Axe/L(b) Make a sketch of U(x) versus x . than 50 words.5. Design an invitation card to launch your new collection of books among theregular readers of your reading club in not more than 50 words. The December 31, 2021, balance sheet of Chen, Incorporated, showed long-term debt of $1,465,000 and the December 31 2022, balance sheet showed long-term debt of $1,710,000. The 2022 income statement showed an interest expense of $100,500. What was the firm's cash flow to creditors during 20227 ? At what temperature does 1.00 atm of He has have the same density as 1.00 atm of Ne has at 273 K Refer to Figure 4-2. If the government imposes a price ceiling of a, which of the following would be true Is the graphed function linear?Yes, because each input value corresponds to exactly one output value.Yes, because the outputs increase as the inputs increase.No, because the graph is not continuous. No, because the curve indicates that the rate of change is not constant. what is the correct answer b) A distiller with three stages is fed with 100 kmol mixture of maleic anhydride(1) and benzoic acid(2) containing 30 mol % benzoic acid which is a by-product of the manufacture of phthalic anhydride at 13.3 kPa to give a product of 98 mol % maleic anhydride. Using the equilibrium data given below of the maleic anhydride in mole percent, determine the followings i) Make a plot [1 mark] ii) What is the initial vapor composition? [2 marks] iii) If the mixture is heated until 75 mol % is vaporized what are the compositions of the equilibrium vapor and liquid? [4 marks] iv) If the mixture enters at 100 kmol/hr and 1 mole of vapor for every 5 moles of feed condenses then what are the compositions of the equilibrium vapor and liquid? [4 marks] v) What is the initial liquid composition? V) [2 marks]X = 0, 0.055, 0.111, 0.208, 0.284, 0.371, 0,472, 0,530, 0,592, 0,733, 0,814, 0,903, 1Y = 0, 0,224, 0,395, 0,596, 0,700, 0,784, 0,853, 0,882, 0,908, 0,951, 0,970, 0,986, 1 Your neighbor tries to stop his child from sneaking out by removing the distributor cap from the family vehicle. In Behaviorism terms, this would most likely to be considered which of the following:a.Negative Punishmentb.Positive Punishmentc.Negative Reinforcementd.Positive Reinforcement An AC generator supplies an rms voltage of 240 V at 50.0 Hz. It is connected in series with a 0.250 H inductor, a 5.80 F capacitor and a 286 resistor.What is the impedance of the circuit?Tries 0/12 What is the rms current through the resistor?Tries 0/12 What is the average power dissipated in the circuit?Tries 0/12 What is the peak current through the resistor?Tries 0/12 What is the peak voltage across the inductor?Tries 0/12 What is the peak voltage across the capacitor?Tries 0/12 The generator frequency is now changed so that the circuit is in resonance. What is that new (resonance) frequency? A 20.0 kg object starts from rest and slides down an inclined plane. The change in its elevation is 3.0 m and its final speed is 6 m/sec. How much energy did the object lose due to friction as it slid down the plane?