Given the length of the rod, L = 1.1 m, and the mass of the rod, M = 1.2 kg. The distance of the pivot point from the center of the rod is x = L/4 = 1.1/4 = 0.275 m.
To find the moment of inertia of the rod about the pivot point, we use the formula I = Icm + Mh², where Icm is the moment of inertia about the center of mass, M is the mass of the rod, and h is the distance between the center of mass and the pivot point.
The moment of inertia about the center of mass for a uniform rod is given by Icm = (1/12)ML². Substituting the values, we have Icm = (1/12)(1.2 kg)(1.1 m)² = 0.01275 kg·m².
Now, calculating the distance between the center of mass and the pivot point, we get h = 3L/8 = 3(1.1 m)/8 = 0.4125 m.
Using the formula I = Icm + Mh², we can find the moment of inertia about the pivot point: I = 0.01275 kg·m² + (1.2 kg)(0.4125 m)² = 0.01275 kg·m² + 0.203625 kg·m² = 0.216375 kg·m².
Therefore, the moment of inertia of the rod about the pivot point is I = 0.216375 kg·m².
For small amplitude oscillations, sinθ ≈ θ. The torque acting on the rod is given by τ = -mgsinθ × x, where m is the mass, g is the acceleration due to gravity, and x is the distance from the pivot point.
Substituting the values, we find τ = -(1.2 kg)(9.8 m/s²)(0.275 m)/(1.1 m) = -0.3276 N·m.
Since the rod is undergoing simple harmonic motion, we can write α = -(2π/T)²θ, where α is the angular acceleration and T is the period of oscillation.
Equating the torque equation τ = Iα and α = -(2π/T)²θ, we have -(2π/T)²Iθ = -0.3276 N·m.
Simplifying, we find (2π/T)² = 0.3276/(23/192)M = 1.7543.
Taking the square root, we get 2π/T = √(1.7543).
Finally, solving for T, we have T = 2π/√(1.7543) ≈ 1.67 s.
Therefore, the period of oscillation of the rod about its pivot point is T = 1.67 seconds (approximately).
In summary, the moment of inertia of the rod about the pivot point is approximately 0.216375 kg·m², and the period of oscillation is approximately 1.67 seconds.
To Learn more about pivot point. Click this!
brainly.com/question/29772225
#SPJ11
MISSED THIS? Watch IWE 10.8: Read Section 10.6. You can click on the Review link to access the section in your e Text. A 245 mL gas sample has a mass of 0.435 g at a pressure of 749 mmHg and a temperature of 26 °C. Part A What is the molar mass of the gas? Express your answer in grams per mole to three significant figures. Vo] ΑΣφ D ? M g/mol Submit Request Answer
The volume of the gas sample (V) = 245 mL = 0.245 L The mass of the gas sample (m) = 0.435 g Pressure (P) = 749 mmHg Temperature (T) = 26 °C = 26 + 273 = 299 K We can use the Ideal gas equation to calculate the number of moles of the gas. n = PV/RT
Where, n is the number of moles of the gas. P is the pressure of the gas. V is the volume of the gas. T is the temperature of the gas. R is the universal gas constant. The molar mass (M) can be calculated using the formula: M = m/n Where, m is the mass of the gas n is the number of moles of the gas. Substituting the given values, P = 749 mm HgV = 245 mL = 0.245 L (converted to liters)T = 299 KR = 0.0821 L. atm/mol.
K (Universal gas constant) Calculating the number of moles of the gas, n = PV/RT = (749/760) × 0.245 / (0.0821 × 299) = 0.0102 mol Calculating the molar mass of the gas. M = m/n = 0.435 g / 0.0102 mol ≈ 42.65 g/mol Hence, the molar mass of the gas is approximately 42.65 g/mol.
To know more about moles refer here:
https://brainly.com/question/15209553#
SPJ11
Two children (m=29.0 kg each) stand opposite each other on the edge of a merry-go-round. The merry-go-round, which has a mass of 1.64×10 2 kg and a radius of 1.4 m, is spinning at a constant rate of 0.30rev/s. Treat the two children and the merry-go-round as a system. (a) Calculate the angular momentum of the system, treating each child as a particle. (Give the magnitude.) kg⋅m 2 /s (b) Calculate the total kinetic energy of the system. ] (c) Both children walk half the distance toward the center of the merry-go-round. Calculate the final angular speed of the system. rad/s
(a) To calculate the angular momentum of the system, we need to consider the angular momentum of each child as a particle.
The angular momentum (L) of a particle can be calculated as the product of its moment of inertia (I) and its angular velocity (ω).
The moment of inertia of a particle is given by I = m * r^2, where m is the mass of the particle and r is the distance from the axis of rotation.
For each child, the moment of inertia is:
I_child = m * r^2 = (29.0 kg) * (1.4 m)^2 = 57.68 kg⋅m².
Since there are two children, the total angular momentum of the system is:
L_system = 2 * I_child * ω,
where ω is the angular velocity of the merry-go-round.
Substituting the given values for I_child and ω (0.30 rev/s), we can calculate the angular momentum of the system:
L_system = 2 * (57.68 kg⋅m²) * (0.30 rev/s) = 34.61 kg⋅m²/s.
The magnitude of the angular momentum of the system is 34.61 kg⋅m²/s.
(b) The total kinetic energy of the system can be calculated as the sum of the kinetic energies of each child and the merry-go-round.
The kinetic energy (KE) of a particle can be calculated as KE = (1/2) * I * ω^2.
For each child, the kinetic energy is:
KE_child = (1/2) * I_child * ω^2 = (1/2) * (57.68 kg⋅m²) * (0.30 rev/s)^2 = 2.061 J.
The kinetic energy of the merry-go-round can be calculated using its moment of inertia (I_merry-go-round) and angular velocity (ω):
I_merry-go-round = (1/2) * m_merry-go-round * r^2 = (1/2) * (1.64×10² kg) * (1.4 m)^2 = 1.8208×10² kg⋅m².
KE_merry-go-round = (1/2) * I_merry-go-round * ω^2 = (1/2) * (1.8208×10² kg⋅m²) * (0.30 rev/s)^2 = 30.756 J.
The total kinetic energy of the system is:
Total KE = 2 * KE_child + KE_merry-go-round = 2 * 2.061 J + 30.756 J = 35.878 J.
(c) When both children walk half the distance toward the center, the moment of inertia of the system changes.
The new moment of inertia (I_new) can be calculated using the parallel axis theorem:
I_new = I_system + 2 * m * (r/2)^2,
where I_system is the initial moment of inertia of the system (2 * I_child + I_merry-go-round), m is the mass of each child, and r is the new distance from the axis of rotation.
The initial moment of inertia of the system is:
I_system = 2 * I_child + I_merry-go-round = 2 * (57.68 kg⋅m²) + (1.8208×10² kg⋅m²) = 177.16 kg⋅m².
The new distance from the axis of rotation is half the original radius:
r = (1.4 m)
/ 2 = 0.7 m.
Substituting the values into the formula, we can calculate the new moment of inertia:
I_new = 177.16 kg⋅m² + 2 * (29.0 kg) * (0.7 m)^2 = 185.596 kg⋅m².
The final angular speed (ω_final) can be calculated using the conservation of angular momentum:
L_initial = L_final,
I_system * ω_initial = I_new * ω_final,
(177.16 kg⋅m²) * (0.30 rev/s) = (185.596 kg⋅m²) * ω_final.
Solving for ω_final, we find:
ω_final = (177.16 kg⋅m² * 0.30 rev/s) / (185.596 kg⋅m²) = 0.285 rad/s.
Therefore, the final angular speed of the system is 0.285 rad/s.
To know more about angular momentum, please visit
https://brainly.com/question/30656024
#SPJ11
A
transformer has 600 turns in the primary wire and 80 turns in the
secondary. Determine the ratio of the voltages and currents, Vs/Vp
and Is/Ip, respectively.
The secondary winding is 7.5 times higher than the current in the primary winding.
The turns ratio of a transformer is the ratio of the number of turns in the secondary winding to the number of turns in the primary winding.
In this case, the turns ratio is 80 / 600 = 0.133333.
The ratio of the voltages and currents in a transformer is inversely proportional to the turns ratio.
Therefore, the ratio of the voltages is 1 / 0.133333 = 7.5. The ratio of the currents is 0.133333.
In other words, the voltage in the secondary winding is 7.5 times lower than the voltage in the primary winding, and the current in the secondary winding is 7.5 times higher than the current in the primary winding.
Learn more about current with the given link,
https://brainly.com/question/1100341
#SPJ11
The radius of a rod is 0.288 cm, the length of aluminum part is 1.2 m and of the copper part is 2.73 m. i) Lb Aluminum Copper La Determine the elongation of the rod if it is under a tension of 3540 N.
To find the elongation of the rod under a tension of 3540 N, we calculate the elongation of the aluminum and copper parts separately and sum them up. The total elongation of the rod is the sum of the elongations of the aluminum and copper parts.
To determine the elongation of the rod under a tension of 3540 N, we need to calculate the elongation of each part separately and then sum them up.
The elongation of a rod can be calculated using the formula:
ΔL = (F * L) / (A * E),
where ΔL is the elongation, F is the force applied, L is the length of the rod, A is the cross-sectional area, and E is the Young's modulus.
For the aluminum part:
Length (La) = 1.2 m
Force (Fa) = 3540 N
Radius (Ra) = 0.288 cm = 0.00288 m (converted to meters)
Young's modulus (Ea) = 70 GPa = 70 x 10^9 Pa (assuming for aluminum)
Cross-sectional area (Aa) of the aluminum part can be calculated using the formula for the area of a circle:
Aa = π * Ra^2
Substituting the values into the elongation formula, we have:
ΔLa = (Fa * La) / (Aa * Ea)
= (3540 N * 1.2 m) / [(π * (0.00288 m)^2) * (70 x 10^9 Pa)]
For the copper part:
Length (Lc) = 2.73 m
Force (Fc) = 3540 N
Radius (Rc) = 0.288 cm = 0.00288 m (converted to meters)
Young's modulus (Ec) = 120 GPa = 120 x 10^9 Pa (assuming for copper)
Cross-sectional area (Ac) of the copper part can be calculated using the formula for the area of a circle: Ac = π * Rc^2
Substituting the values into the elongation formula, we have:
ΔLc = (Fc * Lc) / (Ac * Ec)
= (3540 N * 2.73 m) / [(π * (0.00288 m)^2) * (120 x 10^9 Pa)]
Finally, we can calculate the total elongation of the rod by summing up the individual elongations:
ΔL = ΔLa + ΔLc
Substitute the calculated values and evaluate the expression to find the elongation of the rod under the given tension.
Learn more about radius from the given link:
https://brainly.com/question/13449316
#SPJ11
Three point charges are located as follows: +2 C at (2,2), +2 C at (2,-2), and +5 C at (0,5). Draw the charges and calculate the magnitude and direction of the electric field at the origin. (Note: Draw fields due to each charge and their components clearly, also draw the net
field on the same graph.)
The direction of the net electric field at the origin is vertical upward.
To calculate the magnitude and direction of the electric field at the origin:First of all, we need to calculate the electric field at the origin due to +2 C at (2,2).We know that,Electric field due to point charge E = kq/r^2k = 9 × 10^9 Nm^2/C^2q = 2 CCharge is located at (2,2), let's take the distance from the charge to the origin r = (2^2 + 2^2)^0.5 = (8)^0.5E = 9 × 10^9 × 2/(8) = 2.25 × 10^9 N/CAt point origin, electric field due to 1st point charge (2C) is 2.25 × 10^9 N/C in the 3rd quadrant (-x and -y direction).Electric field is a vector quantity. To calculate the net electric field at origin we need to take the components of each electric field due to the three charges.Let's draw the vector diagram. Here is the figure for better understanding:Vector diagram is as follows:From the above figure, the total horizontal component of the electric field at origin due to point charge +2 C at (2,2) is = 0 and the vertical component is = -2.25 × 10^9 N/C.Due to point charge +2 C at (2,-2), the total horizontal component of the electric field at the origin is 0 and the total vertical component is +2.25 × 10^9 N/C.
At point origin, electric field due to charge +5 C at (0,5), E = kq/r^2k = 9 × 10^9 Nm^2/C^2q = 5 C, r = (0^2 + 5^2)^0.5 = 5E = 9 × 10^9 × 5/(5^2) = 9 × 10^9 N/CAt point origin, electric field due to 3rd point charge (5C) is 9 × 10^9 N/C in the positive y direction.The total vertical component of electric field E is = -2.25 × 10^9 N/C + 2.25 × 10^9 N/C + 9 × 10^9 N/C = 8.25 × 10^9 N/CNow, we can calculate the magnitude and direction of the net electric field at the origin using the pythagoras theorem.Total electric field at the origin E = (horizontal component of E)^2 + (vertical component of E)^2E = (0)^2 + (8.25 × 10^9)^2E = 6.99 × 10^9 N/CThe direction of the net electric field at the origin is vertical upward. (North direction).
Learn more about direction:
https://brainly.com/question/30098658
#SPJ11
Example 23 – Microscope - Problem 35.15 A microscope with a 16 cm tube length has an over all magnification of 600X also called 600 Power, M =- 600 a) If the eyepiece has a magnification of 20X, what is the focal length of the objective lens? b) What is the focal length of the eyepiece? L L 25 cm M = M ME = fo fe
The focal length of the objective lens is -12,000 cm, and the focal length of the eyepiece is 20 cm.In a microscope with a tube length of 16 cm and an overall magnification of 600X, the focal length of the objective lens and eyepiece can be determined.
To find the focal length of the objective lens, we need to know the magnification of the eyepiece, which is given as 20X. To find the focal length of the eyepiece, we can use the formula:
M = - fo/fe
where M is the overall magnification, fo is the focal length of the objective lens, and fe is the focal length of the eyepiece. We can rearrange the formula to solve for fo:
fo = -M * fe
Now substituting the given values, we have:
fo = -600 * 20
So the focal length of the objective lens is -12,000 cm. To find the focal length of the eyepiece, we can rearrange the formula as:
fe = -fo/M
Substituting the values, we have:
fe = -(-12,000 cm)/600
Therefore, the focal length of the eyepiece is 20 cm.
In summary, given the magnification of the eyepiece and the overall magnification of the microscope, we can calculate the focal lengths of the objective lens and eyepiece. The focal length of the objective lens is -12,000 cm, and the focal length of the eyepiece is 20 cm. These focal lengths play a crucial role in determining the magnification and focusing properties of the microscope.
To learn more about focal length click here: brainly.com/question/1031772
#SPJ11
2. A point on the outer rim of a hollow disk (I = mr2) with radius 30cm and mass 5kg rotates with a constant angular speed of 6 rad/s.
a. How far will the point travel (in meters) in 1 minute of rotation? (5 pts)
b. How many revolutions will the point experience during this time? (3 pts)
c. What net torque is necessary to stop the disk in time 10s? (6 pts)
Given that Radius of the disk r = 30 cmMass of the disk m = 5 kgAngular speed of the disk w = 6 rad/sMoment of Inertia of the disk I = mr²Part a:
To find out how far will the point travel (in meters) in 1 minute of rotation, we need to use the formula to calculate the distance which is given by D = rwTD = distance traveledr = radius of the diskw = angular speed of the diskT = time taken = 60 secondsD = 6 rad/s × 30 cm × 60 seconds = 10800 cm = 108 m.
Therefore, the point will travel 108 meters in 1 minute of rotation.Part b:To find out how many revolutions will the point experience during this time, we need to use the formula to calculate the number of revolutions which is given by N = (D/2πr)N = number of revolutionsD = distance traveledr = radius of the diskN = (108 m/2π × 0.3 m) = 57.1 revolutions.
To know more about disk visit:
https://brainly.com/question/27897748
#SPJ11
In one example of nuclear fusion, two deuterium (2H) nuclei fuse to form tritium (³H) and a proton. The rest mass energy of the deuterium is 1875.62 MeV, whereas the rest mass energies for the tritium and the proton are 2808.92 MeV and 938.27 MeV, respectively. (a) What is the energy released in this fusion reaction? MeV (b) What is the mass deficit in this reaction? kg Read It Need Help?
(a)The energy released in this fusion reaction is calculated using the Einstein's formula which states that energy and mass are interconvertible and the formula is given as:
E = Δm × c² where Δm = the change in mass and c = the speed of light.
The change in mass is calculated as follows:Δm = (mass of reactants) - (mass of products)
We have two reactants: deuterium (2H) and deuterium (2H) and two products:
tritium (³H) and a proton (1H)
Mass of deuterium = 2 × 1.007825 amu= 2.014101 amu= 2.014101 u (u = unified mass unit; 1 u = 1.661 × 10⁻²⁷ kg)Mass of tritium = 3.016049 uMass of proton = 1.007276 uMass of reactants = 2.014101 + 2.014101 = 4.028202 uMass of products = 3.016049 + 1.007276 = 4.023325 uΔm = (4.028202 - 4.023325) u= 0.004877 u= 0.004877 × 1.661 × 10⁻²⁷ kg= 8.095 × 10⁻³⁷ kgE = Δm × c²= 8.095 × 10⁻³⁷ kg × (3 × 10⁸ m/s)²= 7.286 × 10⁻²¹ J= 4.547 MeV
Therefore, the energy released in this fusion reaction is 4.547 MeV.
(b)The mass deficit in this reaction is the difference between the mass of the reactants and the mass of the products. This is already calculated as:
Δm = (mass of reactants) - (mass of products)= (2.014101 + 2.014101) - (3.016049 + 1.007276) u= 0.004877 u= 8.095 × 10⁻³⁷ kg
Therefore, the mass deficit in this reaction is 8.095 × 10⁻³⁷ kg.
To know more about interconvertible visit :
https://brainly.com/question/32509221
#SPJ11
A hydrogen atom in an n=2, l= 1, m₂ = -1 state emits a photon when it decays to an n= 1, 1= 0, ml=0 ground state. If the atom is in a magnetic field in the + z direction and with a magnitude of 2.50 T, what is the shift in the wavelength of the photon from the zero-field value?
The shift in the wavelength of the photon emitted by the hydrogen atom transitioning from an n=2, l=1, m₂=-1 state to an n=1, l=0, ml=0 ground state in a magnetic field with a magnitude of 2.50 T is approximately 0.00136 nm.
In the presence of a magnetic field, the energy levels of the hydrogen atom undergo a shift known as the Zeeman effect. The shift in wavelength can be calculated using the formula Δλ = (ΔE / hc), where ΔE is the energy difference between the initial and final states, h is the Planck constant, and c is the speed of light.
The energy difference can be obtained using the formula ΔE = μB * m, where μB is the Bohr magneton and m is the magnetic quantum number. By plugging in the known values and calculating Δλ, the shift in wavelength is determined to be approximately 0.00136 nm.
To learn more about magnetic field click here: brainly.com/question/30331791
#SPJ11
Controlling the fluid system that is working remotely by programming (PLC with I/O and O/P require start and stop button). The system has main components of: Double Acting cylinder and 5/3 DCV. It requires the extension of the actuator for 15 seconds before returning to the initial position (hint: need the sensor at the extension position).
The fluid system can be remotely controlled by programming a PLC with start and stop buttons, utilizing a double-acting cylinder and a 5/3 DCV, with a 15-second actuator extension and a sensor at the extension position.
To control the fluid system remotely, a Programmable Logic Controller (PLC) can be employed with input and output connections, along with start and stop buttons. The main components of the system include a double-acting cylinder and a 5/3 DCV (Directional Control Valve).
The objective is to extend the actuator for 15 seconds before returning it to the initial position, which requires a sensor at the extension position.
By connecting the PLC to the input devices like the start and stop buttons, as well as the sensor at the extension position, and connecting it to the output devices including the 5/3 DCV, the control logic can be implemented. The PLC program, typically in ladder logic, can be designed to respond to the start button input.
Once the start button is pressed, the PLC will activate the necessary components, energizing the coil connected to the output of the 5/3 DCV, which extends the actuator.
A timer can be incorporated to ensure the actuator remains extended for the desired 15 seconds. The PLC program should also consider the stop button input, which, when pressed, interrupts the actuator extension by de-energizing the coil.
Learn more about Double Acting cylinder
brainly.com/question/32067155
#SPJ11
FULL QUESTION: 2. Controlling the fluid system that is working remotely by programming (PLC with I/O and O/P require start and stop button). The system has main components of: Double Acting cylinder and 5/3 DCV. It requires the extension of the actuator for 15 seconds before returning to the initial position (hint: need the sensor at the extension position).
To control the fluid system remotely, a programmable logic controller (PLC) with input and output components is required. The main components of the system are a double-acting cylinder and a 5/3 directional control valve (DCV). The system is designed to extend the actuator for 15 seconds before returning to its initial position, and it requires a sensor at the extension position.
In this setup, the PLC serves as the central control unit that manages the operation of the fluid system. It receives inputs from sensors, such as the start and stop buttons, and controls the outputs, including the double-acting cylinder and the 5/3 DCV. The PLC program is responsible for defining the logic and sequence of actions.
When the start button is pressed, the PLC activates the 5/3 DCV to allow the flow of fluid into the double-acting cylinder, causing it to extend. The PLC keeps track of the elapsed time using an internal timer and ensures that the actuator remains extended for the specified duration of 15 seconds.
Once the 15 seconds have elapsed, the PLC deactivates the 5/3 DCV, causing the fluid flow to reverse. The double-acting cylinder then retracts to its initial position. The PLC can also incorporate a sensor at the extension position of the actuator to detect when it has fully extended and provide feedback to the control system.
By programming the PLC with the appropriate logic and using input and output components, the fluid system can be controlled remotely, allowing for automated and precise operation.
Learn more about Programmable Logic Controllers (PLCs).
brainly.com/question/32508810
#SPJ11
Find the velocity at the bottom of the ramp of a marble rolling down a ramp with a vertical height of 8m. Assume there is no friction and ignore the effects due to rotational kinetic energy.
Neglecting the impact of friction and rotational kinetic energy, the approximate velocity at the base of a ramp is 12.53 m/s when a marble rolls down a ramp with a vertical height of 8m.
The velocity of the marble rolling down the ramp can be found using the conservation of energy principle. At the top of the ramp, the marble has potential energy (PE) due to its vertical height, which is converted into kinetic energy (KE) as it rolls down the ramp.
Assuming no frictional forces and ignoring rotational kinetic energy, the total energy of the marble is conserved, i.e.,PE = KE. Therefore,
PE = mgh
where m is the mass of the marble, g is the acceleration due to gravity (9.81 m/s²), and h is the vertical height of the ramp (8 m).
When the marble reaches the bottom of the ramp, all of its potential energy has been fully transformed into kinetic energy.
KE = 1/2mv²
When the marble reaches the bottom of the ramp, all of its potential energy has been fully transformed into kinetic energy.
Using the conservation of energy principle, we can equate the PE at the top of the ramp with the KE at the bottom of the ramp:
mgh = 1/2mv²
Simplifying the equation, we get:
v = √(2gh)
Substituting the values, we get:
v = √(2 x 9.81 x 8) = 12.53 m/s
Thus, neglecting the impact of friction and rotational kinetic energy, the approximate velocity at the base of a ramp is 12.53 m/s when a marble rolls down a ramp with a vertical height of 8m.
Learn more about velocity at: https://brainly.com/question/80295
#SPJ11
Suppose you wish to fabricate a uniform wire out of 1.15 g of copper, If the wire is to have a resistance R=0.710Ω, and if all the copper is to be used, find the following. (a) What will be the length of the wire? m (b) What will be the diameter of the wire?
Mass of copper = 1.15 g Resistance of wire, R = 0.710 Ω Density of copper, ρ = 8.92 g/cm³
We need to find the length and diameter of the wire.
(a) Length of the wire
The formula for resistance of a wire is given by ;R = (ρ*L)/A
Putting the value of resistivity ρ=8.92g/cm³ and resistance R=0.710 Ω in the above equation, we get
L = (R * A)/ ρ ---------(1) where, A is the cross-sectional area of the wire.
Now, let's find the mass of the wire and cross-sectional area of the wire using density and diameter respectively.
Mass = Density * Volume
Volume = Mass/Density
We have mass = 1.15 g and density ρ=8.92g/cm³
Hence, Volume of wire = (1.15 g) / (8.92 g/cm³) = 0.129 cm³Also, Volume of the wire can be written as, Volume of wire = (π/4) * d² * L ----------(2) where, d is the diameter of the wire and L is the length of the wire
.Putting the value of volume of wire from equation (2) in (1) we get,
R = (ρ * L * π * d² ) / (4 * L)
R = (ρ * π * d² ) / 4d = sqrt ((4 * R)/ (ρ * π))d = sqrt ((4 * 0.710)/ (8.92 * π)) = 0.159 cm
Now, putting this value of diameter in equation (2), we get,0.129 cm³ = (π/4) * (0.159 cm)² * L
On solving this equation, we get
L = 122.85 m
Hence, the length of the wire is 122.85 meters.
(b) Diameter of the wire is given by;
d = sqrt ((4 * R)/ (ρ * π))
Substituting the values of R, ρ, and π in the above equation, we get;
d = sqrt ((4 * 0.710)/ (8.92 * π)) = 0.159 cm
Therefore, the diameter of the wire is 0.159 cm.
Learn about resistivity and resistance: https://brainly.com/question/13735984
#SPJ11
4. If a force of one newton pushes an object of one kg for a distance of one meter, what speed does the object reaches?
"The object reaches a speed of approximately 0.707 meters per second." Speed is a scalar quantity that represents the rate at which an object covers distance. It is the magnitude of the object's velocity, meaning it only considers the magnitude of motion without regard to the direction.
Speed is typically measured in units such as meters per second (m/s), kilometers per hour (km/h), miles per hour (mph), or any other unit of distance divided by time.
To determine the speed the object reaches, we can use the equation for calculating speed:
Speed = Distance / Time
In this case, we know the force applied (1 Newton), the mass of the object (1 kg), and the distance traveled (1 meter). However, we don't have enough information to directly calculate the time taken for the object to travel the given distance.
To calculate the time, we can use Newton's second law of motion, which states that the force applied to an object is equal to the mass of the object multiplied by its acceleration:
Force = Mass * Acceleration
Rearranging the equation, we have:
Acceleration = Force / Mass
In this case, the acceleration is the rate at which the object's speed changes. Since we are assuming the force of 1 newton acts continuously over the entire distance, the acceleration will be constant. We can use this acceleration to calculate the time taken to travel the given distance.
Now, using the equation for acceleration, we have:
Acceleration = Force / Mass
Acceleration = 1 newton / 1 kg
Acceleration = 1 m/s²
With the acceleration known, we can find the time using the following equation of motion:
Distance = (1/2) * Acceleration * Time²
Substituting the known values, we have:
1 meter = (1/2) * (1 m/s²) * Time²
Simplifying the equation, we get:
1 = (1/2) * Time²
Multiplying both sides by 2, we have:
2 = Time²
Taking the square root of both sides, we get:
Time = √2 seconds
Now that we have the time, we can substitute it back into the equation for speed:
Speed = Distance / Time
Speed = 1 meter / (√2 seconds)
Speed ≈ 0.707 meters per second
Therefore, the object reaches a speed of approximately 0.707 meters per second.
To know more about the motion of an object visit:
https://brainly.com/question/26083484
#SPJ11
The predominant wavelength emitted by an ultraviolet lamp is 350 nm a) What is a frequency of this light? b) What is the energy (in joules) of a single photon of this light? c) If the total power emitted at this wavelength is 30.0 W, how many photons are emitted per second?
Answer: a) The frequency of the light is 8.57 × 10¹⁴ Hz.b) The energy of a single photon of the light is 5.68 × 10⁻¹⁹ J.c) The number of photons emitted per second is 5.28 × 10¹⁹ photons/s.
a) Frequency of the light:Frequency is defined as the number of cycles per unit of time. The frequency (f) of the light is given as the reciprocal of the wavelength λ, that is f = c/λ where c is the velocity of light (3.0 × 10⁸ m/s).
The frequency of the light is thus given as:frequency
= c/λ
= (3.0 × 10⁸ m/s) / (350 × 10⁻⁹ m)
= 8.57 × 10¹⁴ Hzb)
Energy of a single photon of the light:The energy of a single photon is given as E = hf where h is Planck’s constant and f is the frequency of the radiation. Hence:Energy of a single photon of the light,
E = hf
= (6.63 × 10⁻³⁴ J s) (8.57 × 10¹⁴ s⁻¹)
= 5.68 × 10⁻¹⁹ Jc)
Number of photons emitted per second:The power P emitted at this wavelength is given as P = E/t, where E is the energy of a single photon and t is the time taken.
The number of photons N emitted per second is given as the ratio of the total power emitted at this wavelength to the energy of a single photon.Thus:
N = P/E
= (30.0 J/s) / (5.68 × 10⁻¹⁹ J)
= 5.28 × 10¹⁹ photons/s
a) The frequency of the light is 8.57 × 10¹⁴ Hz.b) The energy of a single photon of the light is 5.68 × 10⁻¹⁹ J.c) The number of photons emitted per second is 5.28 × 10¹⁹ photons/s.
To know more about wavelength visit;
brainly.com/question/31143857
#SPJ11
12) A 200-1b man supports all of his weight on a snowshoe with an area of 400 in. In Ibs/in? what pressure does he exert on the snow. a) 1.25 b) 0.625 c) 3.6 d) 0.5 17) The entropy of the universe or of an isolated system can only increase or remain constant. a) false b) true 19) An alpha particle consists of 2 protons and 2 neutrons (a nucleus of a helium atom). In an alpha decay of a parent nucleus, the A and Z values for the product nucleus, when compared to the parent nucleus, can be summarized as follows ("A" = atomic mass; "Z" = atomic number): a) A increases, Z decreases b) A decreases, Z decreases c) A decreases, Z increases d) A increases, Z increases
The pressure that a 200 Ib man exerts on the snow when he supports all of his weight on a snowshoe with an area of 400 in² is: 0.5 Ibs/in.
Given data: Weight of the man = 200 IbArea of the snowshoe = 400 in²To find: Pressure exerted on the snow by the man
Formula used: Pressure = Force / Area
Let the pressure exerted on the snow be 'P' and the force exerted by the man be 'F'.
Now, F = Weight of the man= 200 Ib∵ Pressure = Force / Area... ...
(i)Given, area of the snowshoe = 400 in²Substituting the values in equation (i), we get:P = (200 Ib) / (400 in²)P = 0.5 Ibs/in17)
The statement "The entropy of the universe or of an isolated system can only increase or remain constant" is True.19) The alpha particle consists of two protons and two neutrons.
In alpha decay, the mass number of the atom is decreased by 4 units, while the atomic number decreases by 2 units. Thus, the A decreases, and Z decreases. Therefore, the correct option is (b). A decreases, Z decreases.
to know more about snowshoe here:
brainly.com/question/31981300
#SPJ11
A Honda Civic travels in a straight line along a road. Its distancex from a stop sign is given as a function of timet by the equation x(t) = αt2- βt3,where α =1.60 m/s2 and β = 0.0450 m/s3. Calculate the averagevelocity of the car for the following time intervals.
(a) t = 0 to t = 1.60 s
(b) t = 0 to t = 2.60 s
(c) t = 1.60 s to t= 2.60 s
The average velocity of the Honda Civic for the given time intervals is as follows:
(a) t = 0 to t = 1.60 s: 2.048 m/s
(b) t = 0 to t = 2.60 s: 3.52 m/s
(c) t = 1.60 s to t = 2.60 s: 1.472 m/s
The average velocity of an object is calculated by dividing the change in its position by the change in time. In this case, the position of the Honda Civic is given by the equation x(t) = αt^2 - βt^3, where α = 1.60 m/s^2 and β = 0.0450 m/s^3.
To calculate the average velocity for each time interval, we need to find the change in position and the change in time.
(a) t = 0 to t = 1.60 s:
To find the change in position, we substitute t = 1.60 s into the position equation and subtract the position at t = 0. The change in position is (1.60^2 * 1.60 - 0^2 * 0) - (0 * 0 - 0 * 0) = 4.096 m.
The change in time is 1.60 s - 0 s = 1.60 s.
Therefore, the average velocity is 4.096 m / 1.60 s = 2.048 m/s.
(b) t = 0 to t = 2.60 s:
Similarly, the change in position is (2.60^2 * 1.60 - 0^2 * 0) - (0 * 0 - 0 * 0) = 10.816 m.
The change in time is 2.60 s - 0 s = 2.60 s.
Hence, the average velocity is 10.816 m / 2.60 s = 3.52 m/s.
(c) t = 1.60 s to t = 2.60 s:
For this time interval, the change in position is (2.60^2 * 2.60 - 1.60^2 * 1.60) - (1.60^2 * 1.60 - 0^2 * 0) = 6.656 m.
The change in time is 2.60 s - 1.60 s = 1.00 s.
Thus, the average velocity is 6.656 m / 1.00 s = 6.656 m/s.
Learn more about average velocity
brainly.com/question/28512079
#SPJ11
____________wave or pulsed wave systems will have a higher
quality factor.
Pulsed wave systems will have a higher quality factor than continuous wave systems.
The quality factor of a system is a measure of how well it can store energy and release it in a controlled manner. In the context of ultrasound, the quality factor is a measure of how well a transducer can generate short, sharp pulses of sound.
Pulsed wave systems are able to generate higher quality factor pulses than continuous wave systems because they have a lower damping coefficient. Damping is a process that dissipates energy, and a lower damping coefficient means that less energy is dissipated. This allows the transducer to store more energy and release it in a more controlled manner, resulting in higher quality factor pulses.
For this reason, pulsed wave systems are often preferred for applications where high quality factor pulses are required, such as medical imaging and non-destructive testing.
Here are some additional details about the damping coefficient and how it affects the quality factor of a system:
The damping coefficient is a measure of how easily a system dissipates energy.
A lower damping coefficient means that less energy is dissipated.
This allows the system to store more energy and release it in a more controlled manner, resulting in a higher quality factor.
Pulsed wave systems have a lower damping coefficient than continuous wave systems, which is why they can generate higher quality factor pulses.
Learn more about Wave pulse here:
brainly.com/question/14885673
#SPJ11
Moment of Inertia and Rotational Kinetic Energy Points:30 An aircraft is coming in for a landing at 284 meters height when the propeller falls off. The aircraft is flying at 34.0 m/s horizontally. The propeller has a rotation rate of 18.0 rev/s, a moment of inertia of 76.0 kg.m2, and a mass of 216 kg. Neglect air resistance. With what translational velocity does the propeller hit the ground? Submit Answer Tries 0/40 What is the rotation rate of the propeller at impact? (You do not need to enter any units.) rev/s Submit Answer Tries 0/40 If air resistance is present and reduces the propeller's rotational kinetic energy at impact by 27.0%, what is the propeller's rotation rate at impact? (You do not need to enter any units.)
Hence, the new rotation rate of the propeller at impact is 3.08 × 10³ rev/s (approx) is the final answer.
Given values are, Height of aircraft = h = 284 speed of the aircraft = v = 34.0 m/sMoment of inertia of propeller = I = 76.0 kg.m²Mass of propeller = m = 216 kgInitial rotation rate of propeller = ω₁ = 18.0 rev/sNow, we need to find the translational velocity of propeller and the rotation rate of the propeller at impact.
Translational velocity of propeller, We know that the total energy of the system is conserved and is given by the sum of rotational and translational kinetic energy.E₀ = E₁ + E₂
Where,E₀ = initial total energy = mgh = 216 × 9.8 × 284 J = 6.31 × 10⁵ J [∵ h = 284 m, m = 216 kg, g = 9.8 m/s²]E₁ = rotational kinetic energy of the propeller = ½Iω₁²E₂ = translational kinetic energy of the propeller = ½mv²At impact, the propeller hits the ground and thus, the potential energy of the propeller becomes zero.
Therefore, the total energy of the system at impact is given as, E = E₁ + E₂From the conservation of energy, we can write, mgh = ½Iω₁² + ½mv²v = √[(2/m)(mgh - ½Iω₁²)]Putting the values, we get,v = √[(2/216)(216 × 9.8 × 284 - ½ × 76.0 × 18.0²)] = 127 m/sHence, the translational velocity of the propeller is 127 m/s.
The rotation rate of the propeller at impactWe know that the angular momentum of the system is conserved and is given by, L₀ = L Where,L₀ = initial angular momentum of the propeller and the aircraft
L = angular momentum of the propeller just before impact = IωL₀ = L = Iω₂∴ ω₂ = L₀ / I = (mvr) / IWhere,r = horizontal distance covered by the propeller before hitting the ground = vt = 34.0 × (284/9.8) = 976 m
Putting the values, we get,ω₂ = (216 × 127 × 976) / 76.0 = 3.61 × 10³ rev/s, Hence, the rotation rate of the propeller at impact is 3.61 × 10³ rev/s.If air resistance is present and reduces the propeller's rotational kinetic energy at impact by 27%, then the new rotation rate of the propeller at impact isω₂' = ω₂ √(1 - 0.27) = ω₂ √0.73= 3.61 × 10³ × 0.854= 3.08 × 10³ rev/s (approx)
To know more about aircraft here:
brainly.com/question/32109209
#SPJ11
A small plastic sphere with a charge of 3nC is near another small plastic sphere with a charge of 5nC. If they repel each other with a 5.6×10 −5
N force, what is the distance between them?
The distance between two small plastic spheres with charges of 3nC and 5nC, respectively, can be determined using Coulomb's Law. The distance between the two spheres is approximately 0.143 meters.
Given that they repel each other with a force of 5.6×10^−5 N, the distance between them is calculated to be approximately 0.143 meters. Coulomb's Law states that the force of attraction or repulsion between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Mathematically, it can be represented as:
F = k * (q1 * q2) / r^2
Where F is the force between the charges, q1 and q2 are the magnitudes of the charges, r is the distance between them, and k is the electrostatic constant (k = 9 × 10^9 N m^2/C^2).
In this case, we are given the force between the spheres (F = 5.6×10^−5 N), the charge of the first sphere (q1 = 3nC = 3 × 10^−9 C), and the charge of the second sphere (q2 = 5nC = 5 × 10^−9 C). We can rearrange the formula to solve for the distance (r):
r = √((k * q1 * q2) / F)
Substituting the given values into the equation, we have:
r = √((9 × 10^9 N m^2/C^2) * (3 × 10^−9 C) * (5 × 10^−9 C) / (5.6×10^−5 N))
Simplifying the expression, we find:
r ≈ 0.143 meters
Therefore, the distance between the two spheres is approximately 0.143 meters.
Learn more about coulombs law click here: brainly.com/question/506926
#SPJ11
a 2.0 g metal cube and a 4.0 g metal cube are 6.0 cm apart, measured between their centers, on a horizontal surface. for both, the coefficient of static friction is 0.65. both cubes, initially neutral, are charged at a rate of 8.0 nc/s.
Given Data: Mass of 1st cube, m1 = 2.0 g = 2 × 10⁻³ kg Mass of 2nd cube, m2 = 4.0 g = 4 × 10⁻³ kg Distance between their centers, d = 6.0 cm = 6 × 10⁻² mCoefficient of static friction, μs = 0.65.
Rate of charging, q = 8.0 nC/s Cube A and Cube B are 6 cm apart. Now the force between them can be calculated as F = (G m₁m₂)/r²where G is the Universal Gravitational constant; r is the distance between the centers of two cubes. Forces between Cube A and Cube.
Now, the maximum static friction force that can act on Cube A will be The electric force between Cube A and Cube B will be given by The electric force is negligible compared to the maximum static friction force, which indicates that the maximum static friction force is holding the two cubes together.Therefore, the maximum static friction force can be equated to the force of gravity acting between the two cubes This indicates that the cubes will stick together as long as they are not separated by a distance greater than 3.36 m.
To know more about Mass visit :
https://brainly.com/question/11954533
#SPJ11
A millisievert is equivalent to
A) I rem B) 0.1 rem
: D) 0.001 re C) 0.01 rem
A millisievert is equivalent to 0.1 rem. A rem is an acronym for Roentgen equivalent man, and it is used to measure the dosage of radiation in humans.
A millisievert, abbreviated as mSv, is a measure of the amount of radiation that a person is exposed to. It is a measure of the dose of ionizing radiation in the International System of Units (SI).The millirem (mrem) is a unit of measurement that is used in the United States of America to measure radiation exposure in humans. One rem is equivalent to 1000 millirems (mrem), while one millisievert (mSv) is equal to 100 rem or 100000 millirems. Therefore, one millirem is equal to 0.001 rem. When we convert this to millisieverts, we get one millisievert is equivalent to 0.1 rem.
So the answer to the question is B) 0.1 rem.The millisievert unit is used globally to calculate the dose of ionizing radiation in a person. The value of radiation dose that is considered acceptable varies depending on the country and the purpose of exposure. It is important to be aware of the risks associated with exposure to ionizing radiation to maintain good health.Thus, the answer to the given question is option B) 0.1 rem.A millisievert is a measure of the amount of radiation that a person is exposed to, which is used in the International System of Units (SI). A millirem (mrem) is a unit of measurement used in the United States to quantify radiation exposure in humans.One rem is equivalent to 1000 millirems (mrem), or 100000 millirems is equivalent to 1 millisievert (mSv). As a result, 0.001 rem is equivalent to 1 millirem (mrem), and 0.1 rem is equivalent to 1 millisievert (mSv).
To know more about radiation visit:
https://brainly.com/question/28954595
#SPJ11
If light bends toward the normal when entering some material, then
1. the light goes the same speed in that material
2. then light undergoes total internal reflection
3. then light goes slower in that material
4. then light goes faster in that material
If light bends toward the normal when entering some material, it indicates that light slows down in that material compared to its speed in the previous medium. Therefore, option 3, "then light goes slower in that material," is the correct choice.
When light passes from one medium to another, its speed changes based on the properties of the materials involved. The bending of light at an interface between two media is governed by Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the speeds of light in the two media.
If light bends toward the normal when entering a material, it means that the angle of refraction is smaller than the angle of incidence. According to Snell's law, this occurs when light slows down as it enters the new medium. The change in speed causes the light to change direction and bend toward the normal.
Therefore, option 3, "then light goes slower in that material," is the correct statement. This phenomenon is commonly observed when light enters denser media such as water, glass, or other transparent materials. It is important to note that when light moves from a less dense medium to a denser one, it generally slows down and bends toward the normal, whereas when it moves from a denser medium to a less dense one, it speeds up and bends away from the normal.
Learn more about light here:
brainly.com/question/29994598
#SPJ11
_____________ N C. What Is The Tension On The Wire ______________ N
A. What is the torque applied by the circles mass? (55kg) _________N/m
B. Record the horizontal pivot force _____________ N
C. What is the tension on the wireMass of object 55.0 kg Object dist. from pivot 4.00 m F W rod Mass of rod 50.0 kg Scale vectors F (horizontal pivot force) = 1360 N X F (vertical pivot force) = 245 N Length of rod 4.00 m Show force vectors object Wire angle 30.0⁰
A. The torque applied by the circle's mass is 215 N/m.
B. The horizontal pivot force is 1360 N. The force is given in the question.
C. The tension in the wire is 833 N.
A. Torque is a measure of the force that can cause an object to rotate around an axis or pivot. In other words, torque is the force applied to the object at a certain radius that is perpendicular to the center of mass of the object. To calculate torque, we use the formula:
Torque = Force x Perpendicular distance from the axis of rotation to the line of action of the force.
τ = F × r
where τ = torque (N.m)
F = force (N)
r = perpendicular distance from the axis of rotation to the line of action of the force (m)
Here, the mass of the object is 55 kg, and the object's distance from the pivot is 4.00 m.
Therefore, the torque is:
τ = F × r
= 55 × 9.81 × 4.00
= 215.4 N/m
≈ 215 N/m
The torque applied by the circle's mass is 215 N/m.
B. The horizontal pivot force is 1360 N. The force is given in the question. Hence, we do not need to calculate it.
C. The tension in the wire is 833 N. The tension in the wire is the same as the vertical force acting on the pivot. The wire angle is 30.0⁰.
We can break this force into two components, one perpendicular to the rod and one parallel to it. The perpendicular component does not contribute to the pivot force since it acts along the rod and is balanced by the tension in the rod. The parallel component of the force acting on the pivot is given by:
Fsin 30.0⁰ = 0.5 × 833
= 417 N
Therefore, the tension on the wire is 833 N.
Learn more About torque from the given link
https://brainly.com/question/17512177
#SPJ11
: A cord is used to vertically lower an initially stationary block of mass M = 2.4 kg at a constant downward acceleration of g/8. When the block has fallen a distance d = 2.7 m, find (a) the work done by the cord's force on the block, (b) the work done by the gravitational force on the block, (c) the kinetic energy of the block, and (d) the speed of the block. (Note: Take the downward direction positive)
(a) The work done by the cord's force on the block is -7.938 J. (b) The work done by the gravitational force on the block is 63.792 J. (c) The kinetic energy of the block is (1/2) * 2.4 kg * (1.822 m/s)^2 = 3.958 J. (d) The speed of the block is 1.822 m/s.
(a) The work done by the cord's force on the block can be found using the formula: work = force x distance. Since the downward acceleration of the block is g/8 and the mass of the block is M = 2.4 kg,
the force exerted by the cord is F = M * (g/8). The distance over which the force is applied is given as d = 2.7 m. Therefore, the work done by the cord's force on the block is W = F * d.
(b) The work done by the gravitational force on the block can be calculated using the formula: work = force x distance. The gravitational force acting on the block is given by the weight, which is W = M * g. The distance over which the force is applied is again d = 2.7 m. So, the work done by the gravitational force on the block is W = M * g * d.
(c) The kinetic energy of the block can be determined using the formula: kinetic energy = 0.5 * M * v^2, where v is the speed of the block.
(d) The speed of the block can be calculated using the kinematic equation: v^2 = u^2 + 2a * d, where u is the initial velocity of the block (which is 0 in this case) and a is the acceleration (g/8).
Learn more about speed here: brainly.com/question/17661499
#SPJ11
What is the pressure inside a 310 L container holding 103.9 kg of argon gas at 21.0 ∘ C ? X Incorrect; Try Again; 4 attempts remaining
The pressure inside a 310 L container holding 103.9 kg of argon gas at 21.0 ∘C can be calculated using the Ideal Gas Law, which states that
PV = nRT,
where,
P is the pressure,
V is the volume,
n is the number of moles,
R is the universal gas constant,
T is the temperature in kelvins.
We can solve forP as follows:P = nRT/V .We need to first find the number of moles of argon gas present. This can be done using the formula:
n = m/M
where,
m is the mass of the gas
M is its molar mass.
For argon, the molar mass is 39.95 g/mol.
n = 103.9 kg / 39.95 g/mol
= 2.6 × 10³ mol
Now, we can substitute the given values into the formula to get:
P = (2.6 × 10³ mol)(0.0821 L·atm/mol·K)(294.15 K) / 310 L
≈ 60.1 atm
Therefore, the pressure inside the container is approximately 60.1 atm.
To know more about pressure , visit;
https://brainly.com/question/28012687
#SPJ11
Suggest a change to the arrangement in Fig. 3. 1 that would reduce the force required to lift the slab
To reduce the force required to lift the slab in Fig. 3.1, one possible change to the arrangement is to use a system of pulleys. By introducing a pulley system, the force required to lift the slab can be reduced through mechanical advantage.
Here's how it can be implemented:
1. Attach a fixed pulley to a secure anchor point above the slab.
2. Thread a rope or cable through the fixed pulley.
3. Attach one end of the rope to the slab, and the other end to a movable pulley.
4. Pass the rope over the movable pulley and then back down to the person or lifting mechanism.
5. Apply an upward force on the free end of the rope to lift the slab.
By using a pulley system, the force required to lift the slab is reduced because the weight of the slab is distributed between multiple strands of the rope. The mechanical advantage provided by the pulleys allows the lifting force to be lower than the weight of the slab.
It's important to note that the actual configuration and number of pulleys in the system may vary depending on the specific requirements and constraints of the lifting operation. Consulting a qualified engineer or experienced professional is recommended to design a safe and efficient pulley system for lifting the slab.
Read more about Force:
brainly.com/question/18158308
#SPJ11
4-You throw a .150 kg ball upward to a height of 7.50 m. How
much work did you do?
5-How much work is required to lift a 5 kg bag of sugar .45
m?
The work required to lift a 5 kg bag of sugar 0.45 m is 22.05 Joules.
To calculate the work done when throwing a ball upward, we need to consider the change in gravitational potential energy. The work done is equal to the change in potential energy, which can be calculated using the formula:
Work = mgh
where m is the mass of the ball (0.150 kg), g is the acceleration due to gravity (approximately 9.8 m/s^2), and h is the height (7.50 m).
Work = (0.150 kg)(9.8 m/s^2)(7.50 m) = 11.025 J
Therefore, you did 11.025 Joules of work when throwing the ball upward.
To calculate work, we use the formula:
Work = force × distance × cos(theta)
In this case, the force required to lift the bag of sugar is equal to its weight. Weight is calculated as the mass multiplied by the acceleration due to gravity (9.8 m/s^2):
Weight = mass × g = 5 kg × 9.8 m/s^2 = 49 N
Next, we multiply the weight by the distance lifted (0.45 m):
Work = 49 N × 0.45 m = 22.05 J
The cosine of the angle between the force and the direction of motion is 1 in this case because the force and distance are in the same direction. Hence, we don't need to consider the angle in this calculation.
Therefore, the work required to lift the 5 kg bag of sugar 0.45 m is 22.05 Joules.
To learn more about acceleration due to gravity
Click here brainly.com/question/29135987
#SPJ11
An emf is induced in a conducting loop of wire 1.23 m long as its shape is changed from square to a circle. Find the average magnitude of the induced emf (voltage) if the change in shape occurs in 0.171 s, and the local 5.54 T magnetic field is perpendicular to the plane of the loop. hint: find the area of the square if the perimeter is 1.23 m, and the area of a circle if the perimeter/circumference is 1.23 m
The induced EMF (voltage) due to the change in shape of the square loop into a circular loop is 0.534 V.
Given data:
Length of the conducting loop of wire, L = 1.23 mTime taken to change its shape,
t = 0.171 s
Magnetic field, B = 5.54 T
To find:
The average magnitude of the induced EMF (voltage), E
We know that the induced EMF (voltage), E, is given by
Faraday’s law of electromagnetic induction, E = - dΦ/dtHere, Φ is the magnetic flux which is given by Φ = B.AHere, B is the magnetic field, and A is the area of the conducting loop of wire.The shape of the loop is changed from square to circle.
The perimeter of the square loop = length of wire = 1.23 m So, the length of one side of the square loop = 1.23/4 = 0.3075 m Area of the square loop, A1 = (side)² = (0.3075)² = 0.09445 m²
Circumference of the circular loop = length of wire = 1.23 m
So, the radius of the circular loop = 1.23/2π = 0.1961 m
Area of the circular loop, A2 = πr² = π(0.1961)² = 0.12023 m²
Change in the area of the loop,
ΔA = A2 - A1 = 0.12023 - 0.09445 = 0.02578 m²
Now, the average EMF (voltage),
E = - ΔΦ/Δt= - B ΔA/Δt
= - (5.54 T) (0.02578 m²)/(0.171 s)
= - 0.534 V (average value)
Therefore, the average magnitude of the induced EMF (voltage) is 0.534 V.
The induced EMF (voltage) due to the change in shape of the square loop into a circular loop is 0.534 V.
To know more about induced EMF, visit:
https://brainly.com/question/30891425
#SPJ11
A- Which graphs could represent the Acceleration versus Time for CONSTANT VELOCITY MOTION
The graph that represents the Acceleration versus Time for CONSTANT VELOCITY MOTION is a straight horizontal line at the zero-acceleration mark (a=0).
This is because constant velocity motion is when an object maintains a steady, constant velocity throughout its entire motion. If an object has no change in velocity, it means it is not accelerating. Therefore, its acceleration is zero.
Velocity is a vector quantity that denotes the rate at which an object changes its position.
Acceleration, on the other hand, is a vector quantity that describes the rate at which an object changes its velocity. If the velocity of an object is constant, it means that the object is not accelerating. It is said to be in a state of uniform motion. Uniform motion is characterized by a constant velocity. The graph that represents the Acceleration versus Time for CONSTANT VELOCITY MOTION is a straight horizontal line at the zero-acceleration mark (a=0). This is because constant velocity motion is when an object maintains a steady, constant velocity throughout its entire motion. If an object has no change in velocity, it means it is not accelerating. Therefore, its acceleration is zero.
The graph that represents the Acceleration versus Time for CONSTANT VELOCITY MOTION is a straight horizontal line at the zero-acceleration mark (a=0).
To know more about zero-acceleration visit
brainly.com/question/30285694
#SPJ11
n the figure, 1=1.00×10−7 Cq1=1.00×10−7 C and 2=6.00×10−7 C.q2=6.00×10−7 C. q1 is at (5, 0) and q2 is at (8, 0).
What is the magnitude E of the electric field at the point (x,y)=(0.00 cm,3.00 cm)?(x,y)=(0.00 cm,3.00 cm)?
What is the angle thetaθE that the direction of the electric field makes at that position, measuring counterclockwise from the positive x-x-axis?
What is the magnitude F of the force acting on an electron at that position?
What is the angle thetaθF of the force acting on an electron at that position, measuring counterclockwise from the positive x-x-axis?
The magnitude E of the electric field at the point (x,y) = (0.00 cm, 3.00 cm) is 13,423 N/C, the angle θE that the direction of the electric field makes at that position, measuring counterclockwise from the positive x-axis is 71.9 degrees.
Given,1=1.00×10−7 C, q1=1.00×10−7 C and 2=6.00×10−7 C, q2=6.00×10−7 C. q1 is at (5,0) and q2 is at (8,0).1. First, we need to find the electric field (E) due to q1 at the point (0,3) as shown below.
[tex]E_1 = \frac{kq_1}{r^2}[/tex]Here, [tex]r_1 = \sqrt{(5-0)^2 + (0-3)^2} = \sqrt{34}[/tex][tex]E_1 = \frac{9 \times 10^9 \times 1 \times 10^{-7}}{34}[/tex][tex]E_1 = 2.65 \times 10^6 N/C[/tex]2. Secondly, we need to find the electric field (E) due to q2 at the point (0,3) as shown below. [tex]E_2 = \frac{kq_2}{r^2}[/tex]
Here, [tex]r_2 = \sqrt{(8-0)^2 + (0-3)^2} = \sqrt{73}[/tex][tex]E_2 = \frac{9 \times 10^9 \times 6 \times 10^{-7}}{73}[/tex][tex]E_2 = 7.56 \times 10^5 N/C[/tex]3.
Now, we need to find the resultant electric field E = [tex]\sqrt{{E_1}^2 + {E_2}^2 + 2E_1E_2\cos\theta}[/tex]
Here, θ = angle between E1 and E2 in the XY plane = [tex]\tan^{-1}\frac{3}{5} - \tan^{-1}\frac{3}{8}[/tex][tex]\theta = 71.9^{\circ}[/tex]Therefore, [tex]E = \sqrt{(2.65 \times 10^6)^2 + (7.56 \times 10^5)^2 + 2(2.65 \times 10^6)(7.56 \times 10^5)\cos71.9^{\circ}}[/tex][tex]E = 13,423 N/C[/tex]4.
Now, we need to find the force (F) acting on an electron due to this electric field.
[tex]F = qE[/tex]
Here, [tex]q = -1.6 \times 10^{-19} C[/tex][tex]F = (-1.6 \times 10^{-19})(13,423)[/tex][tex]F = -2.01 \times 10^{-15} N[/tex]5.
Finally, we need to find the angle (θF) that the force vector makes with the x-axis. Here, θF = θE + 180° = 71.9° + 180° = 251.9° (measured counterclockwise from the positive x-axis). Since force is negative, it acts in the direction opposite to the electric field vector. So, we add 180° to θE to get the direction of force. Therefore, θF = 161°.
To know more about magnitude:
https://brainly.com/question/31022175
#SPJ11