Answer:
La fuerza que será necesaria aplicar a un cuerpo de 20kg de masa para imprimirle una aceleración a=4m/s² es 80 N.
Explanation:
La segunda ley de Newton, llamada ley fundamental o principio fundamental de la dinámica, plantea que un cuerpo se acelera si se le aplica una fuerza.
De esta manera, esta ley establece que las aceleraciones que experimenta un cuerpo son proporcionales a las fuerzas que recibe. Dicho de otra forma, la aceleración de un cuerpo es proporcional a la fuerza neta que se le aplica. Cuanto mayor es la fuerza que se le aplica a un objeto con una masa dada, mayor será su aceleración.
La segunda Ley de Newton se expresa matemáticamente como:
F = m*a
Donde:
F es la fuerza neta. Se expresa en Newton (N) m es la masa del cuerpo. Se expresa en kilogramos (Kg.). a es la aceleración que adquiere el cuerpo. Se expresa en metros sobre segundo al cuadrado (m/s²).En este caso:
m= 20 kga= 4 m/s²Reemplazando:
F= 20 kg* 4 m/s²
Resolviendo:
F= 80 N
La fuerza que será necesaria aplicar a un cuerpo de 20kg de masa para imprimirle una aceleración a=4m/s² es 80 N.
what is the difference between the weight of an object and the mass of an object?
The amount of matter a body's mass is the volume of matter abody's mass. Weight is the gravitational force that pulls on the body.
What sets mass and weight apart from one another?The relationship between mass and weight: Mass is a measure of inertia, whereas weight is a measure of force.
Both of these names are frequently used in the same sentence. In order to determine how much matter a body is made up of, its mass is used as mode of measurement.
The acceleration which is caused by gravity on any mass is measured in terms of weight.
Mass is a measure of the quantity of matter in a material, whereas weight measures how the force of gravity acts upon a mass.
In order to determine how much matter a body contains, its mass is used.
To learn more about mass and weight refer to:
brainly.com/question/1966951
#SPJ4
If one branch of a parallel circuit has more resistance than the other branches, how does the amount of current flowing through that branch compare to the other
branches?
a. The branch with more resistance will have more current than the other branches,
b. The branch with more resistance will have less current than the other branches.
C. The branch with more resistance will have the same current as the other branches.
Answer:
b. The branch with more resistance will have less current than the other branches
Explanation:
The resistance of a resistor, is the property of a conductive material that prevents or oppose the flow of current through it
The resistivity is the resistance per unit length per unit cross sectional area
Based on the nature of electric current flow and resistance; the electric current flows through the path of least resistance
Therefore, more of the electric current will flow through the branch with lowest amount of resistance while a lesser amount of current will flow through the branch with more resistance.
The question states "The amplitude of a body undergoing simple harmonic motion is doubled. Which of the following is also doubled?
a) maximum speed
b) frequency
c) total energy
d) period
When the amplitude of a body undergoing simple harmonic motion is doubled then the maximum speed is doubled.
Equation of shm is
x(t) = Xo + Acos(wt + f)
Differentiate it with t
v(t) = wA * sin(wt + f)
Then max speed Vmax is wA
So by above relation if we double the amplitude then velocity will be doubled.
If the force acting on the oscillating body is always in the direction opposite to the displacement of the body from the equilibrium or the mean position and its magnitude is proportional to the magnitude of displacement, the body is said to be executing SHM.
If the displacement vs. time curve of the oscillating body is sinusoidal in nature, the body is said to be executing SHM. This is another definition of SHM.
If the potential energy of the oscillating body is proportional to the square of its displacement with reference to the mean position, the body is said to be executing SHM. This is yet another definition of SHM.
To know more about simple harmonic motion here
https://brainly.com/question/23603440
#SPJ4
Describe how you would find absolute pressure in a car tire if you had a barometer and a tire pump with an air
pressure gauge
The absolute pressure in a car tire can found by following method:
Pressure is the force per unit area applied toward a course perpendicular to the outer layer of an item. To keep it precise, it is an amount of force following up on a unit area. The SI unit for pressure is measured in Pascals (Pa). Other non-SI units are bar and PSI. There are two types of references to quantify pressure,
Gauge Pressure
Absolute Pressure
The most well-known pressure reference is Gauge Pressure which is connoted by a ‘g’ after the pressure unit, for example, 33 psi g. It is the pressure relative to barometric or atmospheric pressure; it is positive for pressures above atmospheric pressure and negative for pressures that are below atmospheric pressure. An Absolute pressure estimation is one that is alluded to as a perfect or an ideal vacuum. The best illustration of an absolute referenced pressure is the calculation of Barometric pressure. To deliver an absolute pressure sensor, one strategy is for a maker to seal a high vacuum behind the detecting diaphragm.Formula of Absolute pressure is given by:
p(a) = p(g) + p(atm)
Where ,
p(a) is absolute pressure,
p(g) is gauge pressure and
P(atm) is atmospheric pressure
To know more about pressure visit:
https://brainly.com/question/11150083
#SPJ1
si un disco fue lanzado con una fuerza de 1000 N, y el disc recorrió una distancia e o.6 m ¿Qué trabajo efectuó el lanzador ?
Answer:
Trabajo realizado = 600 Nm
Explanation:
Dados los siguientes datos;
Fuerza = 1000 Newton
Distancia = 0.6 metros
Para encontrar el trabajo realizado;
[tex] Trabajo \; realizado = fuerza * distancia [/tex]
Sustituyendo en la ecuación, tenemos;
[tex] Trabajo \; realizado = 1000 * 0.6 [/tex]
Trabajo realizado = 600 Nm
1) Renatta Gass is out with her friends misfortune occurs and renatta and her Friends find themselves getting a workout. They apply a cumulative force Of 1580N to push the car 288m to the nearest fuel station. Determine the work done on the car.
Work is characterized as a force that causes an object to move or be displaced. The work done would be 455040.
What is Work?Work is the scalar product of the force acting on an object and the displacement that force causes when the force is constant.
Despite the fact that work lacks a direction due to the scalar product (or dot product) aspect of vector mathematics, force and displacement are both vector quantities.
"W" stands for work, "F" is the force, and "d" represents displacement (or the distance the object travels).
Therefore, Work is characterized as a force that causes an object to move or be displaced. The work done would be 455040.
To learn more about work, refer to the link:
https://brainly.com/question/18094932
#SPJ1
How does the number of wavelengths vary with the orbital number of the shell?
a. The number of wavelengths increases corresponding to the orbital number of the shell.
b. The number of wavelengths decreases corresponding to the orbital number of the shell.
c. The number of wavelengths does not change with the orbital number of the shell.
The number of wavelengths increases corresponding to the orbital number of the shell.
The quantum mechanical model of atoms represents the three-dimensional location of the electron in a probabilistic manner using a mathematical function known as a wavefunction, which is sometimes denoted as. Orbitals are another name for atomic wavefunctions. The wavefunction's squared magnitude reflects the probability distribution of locating the electron in a certain region of space. As a result, atomic orbitals characterize the regions of an atom that are most likely to contain electrons. Three quantum numbers characterize an atomic orbital. Any positive integer can be used as the primary quantum number, n. n is connected to the general region for orbital energy value and the average distance of an electron from the nucleus.
We can learn more about orbital number here:
https://brainly.com/question/5087295#
#SPJ4
For the segment AB in the bacterium's trajectory, calculate the x component of its velocity.
Express your answer in micrometers per second
UABx = 2o pm/s
For segment AB in the bacterium's trajectory, The x component of its velocity is 3.92m/s.
[tex]AB_X = 50um AB_Y = 10um[/tex]
[tex]AB =\sqrt{50^{2}+ 10^{2} } = 50.99um[/tex]
[tex]t = \frac{AB}{20} = 2.55[/tex]
[tex]V_ABY = \frac{AB_Y}{T}[/tex]
[tex]\frac{10}{2.55}[/tex] [tex]= 3.92m/s[/tex]
Speed is the directional pace of an item in motion as an illustration of its fee of change in position as discovered from a specific body of reference and as measured with the aid of a selected well-known time (e.g. 60 km/h northbound). speed is an essential idea in kinematics, the department of classical mechanics that describes the motion of our bodies.
Velocity is a physical vector quantity; both importance and route are had to define it. The scalar absolute value (significance) of velocity is known as pace, being a coherent derived unit whose amount is measured within the SI (metric system) as meters per 2d (m/s or m⋅s−1). as an example, "5 meters per 2d" is a scalar, whereas "5 meters in step with 2nd east" is a vector. If there's an exchange in speed, direction, or each, then the object is stated to be present process an acceleration.
To learn more about Velocity visit here:
brainly.com/question/18084516
#SPJ4
Explain why the speed of a competitor changes during the race. [4 marks]
AQA combined science physics paper 1 2022
The reason that speed of a competitor changes during the race is that
Physical conditionTerrainWeatherStrategyTacticsInjuryWhat is the race about?The speed of a competitor during a race can change for a variety of reasons. Some of the most common include the following:
Physical condition: A competitor's physical condition can change during a race, leading to a change in their speed. For example, a runner may start off strong but tire as the race progresses, causing their speed to decrease.
Terrain: The terrain of the race can also have an impact on a competitor's speed. Running uphill, for example, typically requires more effort and can slow a competitor down, while running downhill can allow them to pick up speed.
Weather: Weather conditions can also affect a competitor's speed during a race. Running in hot, humid conditions, for example, can make it more difficult for a competitor to maintain a high level of performance.
Strategy: Competing athlete has a strategy to maintain a sustainable pace which he could not change that often, it could lead to either decrease or increase in speed.
Tactics: Athletes may also adjust their tactics during a race in response to the competition. For example, a runner may slow down to conserve energy in the early stages of a race in order to have a stronger finish.
Injury: Sometimes, an injury can happen during a race and it can force the athletes to adjust their speed to adapt.
In all, the speed of a competitor during a race can change for a variety of reasons related to their physical condition, the terrain, weather, strategy, tactics and injury.
Learn more about race from
https://brainly.com/question/3681644
#SPJ1
Which statements best describe magnetic fields? Check all that apply.
O A magnetic field is a region where a magnetic force is exerted on certain objects.
O A magnetic field behaves like a force vector.
O Magnetic field lines are strongest around the middle of the magnet.
O Magnetic field lines form closed loops that spread out of the north end of a magnet.
O Magnetic field lines form closed loops that spread out of the south end of a magnet.
O.A magnetic field is a region where a magnetic force is exerted on certain objects.
O. A magnetic field behaves like a force vector.
O.Magnetic field lines form closed loops that spread out of the north end of a magnet.
Explanation:
1,2, and 4
Answer:
a,b,d
Explanation:
i took the test
HELP
a single beam of white light shine through this glass triangular prism below: What is happening to the speed of light as it moves from the air to the glass of the prism? options: The speed of light is increasing, creating the rainbow effect. The speed of light is decreasing, creating the rainbow effect. The speed of light does not change, only the angle creates the rainbow. The speed of light does not change, the rainbow is created because the prism is made of glass.
Answer:
speed of light is decreasing, creating the rainbow effect
Explanation:
the prism is acting as a vaccum, when light enters a vaccum it's refracted
To understand electrical currents we need to understand
Electric current is a term used to describe how much electricity flows across a circuit and how it flows in an electronic circuit. Amperes are used to measure it (A).
How much electricity is best understood?The energy of charged particles is referred to as electricity. One option for storing electricity is a battery. Electricity flows when you connect a battery to a light bulb. Due to the fact that electrical charges (electrons) can freely transport energy from the battery through the bulb, this occurs.
What is the most crucial electrical rule?Disconnect the power source. This is the first and most crucial requirement to abide by. This is the first and most crucial rule to adhere to. If you ever need to repair electrical equipment in your house, be sure to first unplug it from the power source. It might not be sufficient to simply turn it off.
to know more about electrical currents here:
brainly.com/question/2264542
#SPJ1
In Cathode Ray Oscilloscope (CRO), if plates for vertical deflection are removed then what will be the wave pattern on the fluorescent screen?
Answer:
the waves will appear horizontally on the florescent screen because the y-plates have been removed
Without the plates for vertical deflection, the CRO will only display the horizontal waveform on the fluorescent screen, with no vertical deflection.
What is CRO?CRO stands for Cathode Ray Oscilloscope. It is an electronic instrument used for visualizing and measuring various electrical and electronic waveforms. It works by displaying a graph of voltage versus time on the screen. This graph is generated by deflecting a beam of electrons, known as the cathode ray, across a screen coated with a phosphorescent material that emits light when struck by the electrons. The horizontal axis of the screen represents time, while the vertical axis represents the amplitude of the signal being measured. CROs are widely used in electronic engineering, telecommunications, and other fields for testing and analyzing signals.
Here in the Question,
If the plates for vertical deflection are removed in a Cathode Ray Oscilloscope (CRO), then the wave pattern on the fluorescent screen will be a straight line, with the height of the line depending on the voltage applied to the horizontal deflection plates.
This is because the CRO uses an electron beam to display the waveform of an electrical signal on a fluorescent screen. The electron beam is directed towards the screen by the deflection plates, which are typically placed perpendicular to each other.
When a voltage is applied to the vertical deflection plates, the electron beam is deflected vertically, resulting in a waveform on the screen. If the vertical deflection plates are removed, the electron beam will not be deflected vertically and will travel in a straight line towards the screen.
However, if a voltage is applied to the horizontal deflection plates, the electron beam will be deflected horizontally, resulting in a waveform that is displayed horizontally on the screen. The height of the waveform will be determined by the voltage applied to the horizontal deflection plates.
Therefore, without the plates for vertical deflection, the CRO will only display the horizontal waveform on the fluorescent screen, with no vertical deflection.
To learn more about electromagnetic radiation click:
https://brainly.com/question/10759891
#SPJ3
A wave moving along a rope has a
wavelength of 1.5 m and a frequency
of 5.5 Hz. How fast is the wave
traveling along the rope?
A. 3.67 m/s
B.5.4 m/s
C.8.25 m/s
D.3.75 m/s
Answer:
V = wavelength * frequency = 1.5 * 5.5 = 8.25 m/s
Fast cooling rates tends to promote transformations that result in relatively course structures (e.g. for a reaction resulting in multiple product phases, the secondary phase particles are (i) fewer in count (ii) larger in size and (iii) relatively spherical). True or False
For most materials, the formation of a glass from a liquid typically requires extremely slow cooling rates, thereby taking on the order of years or even centuries to produce. True or False
For a system below its melting point, a glass (or non-crystalline / amorphous) configuration is the most energetically stable state that is possible, since it offers the lowest Gibbs free energy for all possible solid configurations. True or False
When measured experimentally, most materials tend to exhibit the same exact temperature value for both melting and freezing (crystallization). True or False
Gray iron is a microstructure that tends to result when a cast iron of appropriate composition is cooled fairly quickly. True or False
Coarsening refers to the scenario where, upon heating and/or annealing for sufficient time, the scale of a microstructure tends to reduce (e.g. grains become smaller, secondary phase particles separate into smaller particles and become more finely dispersed, often reverting to high aspect ratio or high surface-area-to-volume ratio configurations. True or False
Answer:
1) correct answer is ii larger size
2) false, 3) false, 4) true, 5) true, 6) true
Explanation:
In this exercise, the answer is asked if the statement is true.
1) in the rapid cooling speed, there is no thermodynamic equilibrium, so the secondary phases do not have time to transform into the main one, therefore many phases appear in the products,
the correct answer is ii
2) False. The transformation of a material to the glass state requires a fixed temperature and rapid changes to reach this temperature,
3) False. The most stable state is the crystalline state, the glass states are metastable, their Gibbs energy is not the lowest possible and they must transition to the crystalline state over time, it can be years or centuries.
4) True. The melting and freezing temperatures change for each material, within the same material it always has the same value, since it corresponds to a change in the state of the system.
5) true. Cast iron is called gray because of the impurities inside that have not had time to move due to rapid cooling.
6) True. The microstructure is reduced in the process of cooling and heating
a certain mass of neon is in a rigid steel container. the samew mass og helium is added, what happens to pressure
According to the question, the container's pressure increases but it doesn't double.
This word pressure, what is it?By dividing the force by the area, pressure is calculated. the use of force to oppose another force. a surface's area divided by a force applied over it. the force that the atmosphere's weight causes to be applied.
What is a good instance of pressure?Holding a knife against a fruit piece will demonstrate pressure in an easy way. It won't cut surface of the fruit if you press the flat side of a knife against it. A sizable area is affected by the force (low pressure).
To know more about pressure visit :
https://brainly.com/question/17467912
#SPJ4
Electromagnetic radiation is a kind of (1) ____________________ that behaves like a(n) (2) ___________________ as it travels through space. (3) __________________ is one type of electromagnetic radiation. Other examples include X-rays, radio waves, and microwaves.
A type of (1) energy known as electromagnetic radiation acts in space like a(n) (2) wave. (3) One kind of electromagnetic radiation is light. Microwaves, radio waves, and X-rays are some further examples.
What does electromagnetic radiation refer to?radiation with a magnetic and electrical field that moves in waves .It derives from both organic and artificial sources. The energy levels of electromagnetic radiation might be low or high. It is made up of radio waves, microwaves, infrared photons, visible light, uv irradiation, x-rays, and gamma rays.
From top to bottom energy, the components of the visible radiation are refer to as gamma radiation, X-rays, Uv rays, photons, infrared rays, and radio waves. Microwave waves, like those used in microwave ovens, are a subset of the electromagnetic spectrum's radio wave category.
To learn more about electromagnetic radiation from given link
https:/brainly.com/question/1408043
#SPJ4
What is the relationship between the mass of an object and the amount of thermal energy an object has?
The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.
What is thermal energy and what are some examples?Thermal energy is shown by boiling water on a stove. Thermal energy is created when the atoms and molecules of a material vibrate faster as the temperature rises.
What is an example of a mass?Mass is best defined as the quantity of matter contained in any item or body. Everything in our environment has mass. For example, a table, a chair, your bed, a football, a glass, and even air has mass. That being said, all objects are light or heavy because of their mass.
Learn more about thermal energy to visit this link
https://brainly.com/question/18989562
#SPJ4
What is the velocity of an object that is falling to Earth for 8 seconds? 1.225 m/s b. 9.8 m/s2 c. 78.4 m/s d. 0.816 m/s2
Answer:
Explanation:
Just use the acceleration equation here:
[tex]a=-\frac{v}{t}[/tex] where a = -9.8; velocity is also negative because it's falling down and down is negative. Filling in:
[tex]-9.8=-\frac{v}{8}[/tex] so
-9.8(8) = -v and
v = 78.4 m/s downward (the word "downward" takes place of the negative sign)
How can you tell which elements will form ions?
Answer: The position of an element on the periodic table, see resources, tells you the type of ions it will form, with the elements on the right forming anions (negative charge) and those further to the left forming cations (positive charge).
Hope this helps any
If A and B are two Hermitian operators, showthat AB and BA may
not be Hermitian, but that (AB + BA) andi(AB-BA) are both
hermitian. Prove that the expectation value ofA2 is
always real and non-negative. If A2=2,find the
eigenvalues of A
A and B being Hermitian operators means that they are equal to their own conjugate transpose.
What is a Hermitian operator?
A Hermitian operator is an operator that is equal to its own complex conjugate. This means that if an operator A is Hermitian, then A=A*. This property is important in quantum mechanics, since it guarantees that the eigenvalues of the operator are real.
AB ≠ BA
(AB + BA) = (A + B)*(A + B) = A*A + A*B + B*A + B*B
(AB + BA) is Hermitian since the conjugate transpose of a sum is the sum of the conjugate transposes.
i(AB-BA) = i(A - B)*(A - B) = -iA*A + iA*B -iB*A + iB*B
i(AB-BA) is Hermitian since the conjugate transpose of a sum is the sum of the conjugate transposes.
The expectation value of A2 is always real and non-negative since A2 is Hermitian and thus equal to its own conjugate transpose, which implies its eigenvalues are real.
If A2 = 2, then A can have eigenvalues of ±√2.
Hence, eigenvalues of A is ±√2.
To know more about a Hermitian operator,
https://brainly.com/question/14671266
#SPJ4
Why are dynamic flexibility tests not used as often as static flexibility tests a dynamic flexibility tests involve m?
Dynamic flexibility tests are not used as often as static flexibility tests because dynamic flexibility tests involve movement, while static flexibility tests are stationary.
Dynamic flexibility tests are more difficult to perform and require more coordination, and they can be less reliable than static flexibility tests. Additionally, dynamic flexibility tests require more time and equipment to administer, making them less practical for most fitness assessment settings.
Also, dynamic flexibility tests are more specific and measure the ability to perform a specific movement, rather than measuring the general range of motion of a joint. This makes them more suitable for testing athletes and those who need to measure their ability to perform specific movements.
Learn more about Dynamic flexibility :
https://brainly.com/question/1234108
#SPJ4
An integrated circuit is tiny, so current can flow through it very quickly. This helps it
carry out tasks with incredible speed. TRUE or
FALSE
Answer: True
Explanation:
Is there ever a case where one of the two charges in Coulomb's Law experiences a different force magnitude than the other charge? Why or why not?
Answer:
Yes, there is a case where one of the two charges in Coulomb's Law experiences a different force magnitude than the other charge. Coulomb's Law states that the electric force between two charged particles is directly proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance between them. If the magnitudes of the charges or the distance between them changes, the force experienced by one of the charges will also change. For example, if one of the charges is doubled in magnitude while the other charge and the distance between them remain the same, the force experienced by the charge with the increased magnitude will also double.
In which of the following situations is kinetic energy transformed into chemical energy by way of electrical energy?
A. wind turns the blades of a turbine on a wind generator, producing electricity that can be stored in a battery.
B. wood is burned in a steam engine to drive an electrical generator that in turn provides energy for a motor.
C. charge separation caused by motion and friction among clouds produces lightning, which strikes a tree, setting it on fire.
D. the electric current from a battery is used to separate water molecules into their elemental oxygen and hydrogen components.
The situations is kinetic energy transformed into chemical energy by way of electrical energy is- wind turns the blades of a turbine on a wind generator, producing electricity that can be stored in a battery.
Hence, option A is correct.
Wind turbines convert wind's mechanical energy into electrical energy. In this scenario, a turbine uses the kinetic energy of moving air to create a rotating motion. Wind causes a wind turbine's blades to move or rotate as it blows past them. An engine is powered by these blades.An object's kinetic energy is the energy it has as a result of motion. Applying force is necessary if we wish to accelerate an object. After the job is finished, the object will be travelling at a new, constant speed because energy has been transferred to itTo know more about kinetic energy here
https://brainly.com/question/25959744
#SPJ4
Question 1 (4 points)
What are some things that can lead to depression, according to Ellie?:
Explanation:
Ellie, the machine that can detect depression
Technology is an important channel to treat mental illness,
Abuse. Physical or emotional abuse can make you more vulnerable to depression later in life.
Age. People who are elderly are at higher risk of depression. That can be made worse by other factors, such as living alone and having a lack of social support.
Certain medications. Some drugs, such as isotretinoin (used to treat acne), the antiviral drug interferon-alpha, and corticosteroids, can increase your risk of depression.
Conflict. Depression in someone who has the biological vulnerability to it may result from personal conflicts or disputes with family members or friends.
Death or a loss. Sadness or grief after the death or loss of a loved one, though natural, can increase the risk of depression.
Gender. Women are about twice as likely as men to become depressed. No one's sure why. The hormonal changes that women go through at different times of their lives may play a role.
Genes. A family history of depression may increase the risk. It's thought that depression is a complex trait, meaning there are probably many different genes that each exert small effects, rather than a single gene that contributes to disease risk. The genetics of depression, like most psychiatric disorders, are not as simple or straightforward as in purely genetic diseases such as Huntington's chorea or cystic fibrosis.
Major events. Even good events such as starting a new job, graduating, or getting married can lead to depression. So can moving, losing a job or income, getting divorced, or retiring. However, the syndrome of clinical depression is never just a "normal" response to stressful life events.
Other personal problems. Problems such as social isolation due to other mental illnesses or being cast out of a family or social group can contribute to the risk of developing clinical depression.
Serious illnesses. Sometimes, depression happens along with a major illness or may be triggered by another medical condition.
Substance misuse. Nearly 30% of people with substance misuse problems also have major or clinical depression. Even if drugs or alcohol temporarily make you feel better, they ultimately will aggravate depression.
How does Accenture myNav Green Cloud Advisor integrate sustainability?
Accenture can assist its clients in being more sustainable thanks to the myNav. By making it easier to create cloud solutions that lower carbon emissions by rearranging manufacturing facilities such that carbon emissions can be calculated with ease.
by establishing new corporate efforts to lower transportation expenses and by establishing new rules for the disposal of out-of-date technology.
Accenture can assist its clients in becoming more sustainable by using mynav to locate, assess, architect, and simulate an end-to-end solution at scale.
reduces the expense of transportation
creates a design that is appropriate and aids the customer in becoming more sustainable.
establishes sustainable guidelines for disposing of outdated technology.
myNav Green Cloud Advisor assists businesses in developing cloud solutions that cut carbon emissions and create a platform for ethical innovation. Green Cloud Advisor starts by establishing a baseline for the energy usage, compute needs, and sustainability objectives of current data centers. through promoting the development of cloud technologies that cut down on carbon emissions
To learn more about Accenture myNav from given link
https://brainly.com/question/26449898
#SPJ4
hello please help i’ll give brainliest
Answer:
Antarctica and Australia were one landmass millions of years ago
Explanation:
Thats the answer I'm very sure of it
Answer:
It is Antartica and Australia
HELP ASAP. WILL GIVE BRAINLIEST. BEING TIMED HURRY!!!!
Choose all the answers that apply.
Which of the following statements is true?
Decreasing force increases an object's acceleration, where mass is constant.
Friction works in the direction opposite of motion.
Increasing mass increases an object's inertia.
| Increasing mass decreases an object's acceleration, where force is constant.
Answer:
B
Explanation:
B BBB
Answer: I think the answer is B if im not wrong
Explanation:
which one is the full moon?
Answer:
The one to the left
Explanation: